Готові списки джерел за темами / Industrial automation enterprises

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій

Добірка наукової літератури з теми "Industrial automation enterprises"

Автор: Grafiati
Опубліковано: 30 травня 2022
Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Industrial automation enterprises".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Industrial automation enterprises"

1

Baoyu, U. "Formation of a management mechanism for industrial enterprises." Transbaikal State University Journal 26, no. 10 (2020): 127–35. http://dx.doi.org/10.21209/2227-9245-2020-26-10-127-135.

Повний текст джерела
Анотація:
The article presents current problems faced by industrial enterprises related to the impact of the coronavirus epidemic. Difficulties arising from the production of industrial products, which are directly related to restrictive measures, are disclosed. The key directions of companies in the field of processing are defined, namely: creation of a corporate information management system, improvement of the cash management system, introduction of such mechanisms as” implementation of remote office “and” promotion of production automation. Currently, many manufacturing companies have urgent needs for remote collaborative task management, project management, workflow management, and other software. At the same time, they pay more attention to the practical application of BI, big data analysis, and artificial intelligence. The key advantages of processes for automation and intelligent modernization of fixed assets are identified. It is proved that integration of remote control, intelligent equipment and a high level of automation into production and management processes of industrial enterprises will contribute to development in the short and long term. The main task of the presented research is to determine the key features and relationships of the elements of the management mechanism of industrial enterprises among themselves. At the same time, it was possible to form a conceptual management model based on them. To do this, it is necessary to determine the role of the industrial enterprise management mechanism in the management system. The General structural model of the industrial enterprise management mechanism in the conditions of remote control of divisions is formed. The main goal of integrating the management mechanism of an industrial enterprise is to increase competitive advantages and increase profits
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Polukhov, T. N. "Conceptual bases of automation of business process accountancy in industrial enterprises." Azerbaijan Oil Industry, no. 3 (March 15, 2021): 47–52. http://dx.doi.org/10.37474/0365-8554/2021-3-47-52.

Повний текст джерела
Анотація:
The article studies the economic nature of the business process, provides its detailed definition, classifies business processes according to the level of automation, identifies the areas for business process automation in industrial enterprises, develops methodological and conceptual bases for business process modeling, as well as presents fundamental principles of automation of the business processes in Azerbaijan's industrial enterprises.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Zhou, Geng Lie, Chi Bing Hu, Ya Zhou Wang, and Juan Wen Xie. "Application and Integration of Control Network and Information Network." Advanced Materials Research 875-877 (February 2014): 2275–79. http://dx.doi.org/10.4028/www.scientific.net/amr.875-877.2275.

Повний текст джерела
Анотація:
Enterprise integrated automation is the general trend of industrial control development. The combination of control network and information network provides comprehensive information services for enterprise as production information, production control, planning decisions and sales management as well. The industrial control network and information network integration can realize the information and resources sharing among the enterprises networks and further improve the enterprises informationization and integrated automation level so as to achieve the situation that the enterprise production and management is more efficient and more flexible. The study introduces the information integration of the fieldbus control network and the information network and analyze the information integration technologies such as internetworking, dynamic data exchange (DDE), Open Database Connectivity (ODBC), OLE for Process Control (OPC), control network and information network with unified protocol standards. the integration application of bus system is illustrated with the example of Controller Area Network (CAN) bus.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Татьяна Борисовна, Малкова, and Богданова Ирина Васильевна. "PROBLEMS OF DIGITALIZATION OF INDUSTRIAL ENTERPRISES OF THE MILITARY-INDUSTRIAL COMPLEX." STATE AND MUNICIPAL MANAGEMENT SCHOLAR NOTES 4, no. 4 (December 2021): 111–15. http://dx.doi.org/10.22394/2079-1690-2021-1-4-111-115.

Повний текст джерела
Анотація:
The paper considers the problems of economic security of industrial enterprises of the military-industrial complex (MIC) associated with a sharp increase in the requirements for digitalization of data, certain formats for uploading analytics, automation of reporting. The unwillingness of both the enterprises themselves and the Ministry of Defense of the Russian Federation to the rapid introduction of digital methods for collecting and processing confidential information, which is essentially a trade secret of defense industry enterprises, was noted. In this connection, concerns have been voiced about the security of data transmission channels of military missions of the Ministry of Defense, which threatens the economic security of industrial enterprises and the defense industry of the Russian Federation as a whole.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Татьяна Борисовна, Малкова, and Богданова Ирина Васильевна. "PROBLEMS OF DIGITALIZATION OF INDUSTRIAL ENTERPRISES OF THE MILITARY-INDUSTRIAL COMPLEX." STATE AND MUNICIPAL MANAGEMENT SCHOLAR NOTES 4, no. 4 (December 2021): 111–15. http://dx.doi.org/10.22394/2079-1690-2021-1-4-111-115.

Повний текст джерела
Анотація:
The paper considers the problems of economic security of industrial enterprises of the military-industrial complex (MIC) associated with a sharp increase in the requirements for digitalization of data, certain formats for uploading analytics, automation of reporting. The unwillingness of both the enterprises themselves and the Ministry of Defense of the Russian Federation to the rapid introduction of digital methods for collecting and processing confidential information, which is essentially a trade secret of defense industry enterprises, was noted. In this connection, concerns have been voiced about the security of data transmission channels of military missions of the Ministry of Defense, which threatens the economic security of industrial enterprises and the defense industry of the Russian Federation as a whole.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Zavrazhnyi, Kostiantyn. "Automation of budgeting of industrial enterprises as the basis for digitalization of internal communication business processes." VUZF REVIEW 5, no. 1 (March 31, 2020): 31–37. http://dx.doi.org/10.38188/2534-9228.20.1.04.

Повний текст джерела
Анотація:
The purpose of the article is to summarize the theoretical and practical principles of digitalization of communication business processes of Ukrainian enterprises in the framework of digitization of their business. The article studies the advantages and prospects of the implementation of BAS ERP systems into industrial enterprises activities. The necessity and relevance of automation of clerical business processes of industrial enterprises is proved. The model of digitalization of communication business processes is schematically presented. The procedure of digitalization of communication business processes of industrial enterprises is formalized by the case of their budgeting automation. The implementation of the author’s suggestions makes it possible to disseminate this experience for the activities of other business entities.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Olexy, Kvilinski. "ANALYSIS OF THE CONDITION OF AUTOMATION MANAGEMENT INDUSTRIAL ENTERPRISES." Scientific Bulletin of Kherson State University. Series Economic Sciences, no. 34 (June 26, 2019): 67–71. http://dx.doi.org/10.32999/ksu2307-8030/2019-34-14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Korableva, Galina, and Elena Kucherova. "Automation of quality management systems of agro-industrial enterprises." IOP Conference Series: Earth and Environmental Science 403 (December 19, 2019): 012186. http://dx.doi.org/10.1088/1755-1315/403/1/012186.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Pelagagge, P. M., G. Cardarelli, and M. Palumbo. "ASSEMBLY AUTOMATION IN SMALL ENTERPRISES." Assembly Automation 12, no. 3 (March 1992): 17–21. http://dx.doi.org/10.1108/eb004367.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Ilin, Igor V., Anastasia I. Levina, and Sofia E. Kalyazina. "Function-oriented approach to mining enterprise automation." Journal Of Applied Informatics 17, no. 2 (March 31, 2022): 5–19. http://dx.doi.org/10.37791/2687-0649-2022-17-2-5-19.

Повний текст джерела
Анотація:
Nowadays a production enterprise is inconceivable without the automation of all its processes – technological, production, and managerial. The efficiency of an enterprise largely depends on high-quality data processing within a single information space. The introduction of an integrated automated management system for an industrial enterprise, consistent with the business model, will eliminate many of the problems arising during creation, integration and development of automated systems, will create an effective enterprise management system and will reduce future costs of production modernization. Current trends of digital transformation increase the demand for an integrated business management system model, that would include a model of an integrated information management system as an integral part of it. The study aims to develop a reference functional model of mining enterprises, including a comprehensive vision of business, production and technological processes and their IT support. The model proposed is based on the analysis of existing international industry approaches to automation, as well as the experience and best practices of automation of mining enterprises. The methodological foundations of the research include enterprise architecture approach (including the concept of service-oriented architecture) and authors' function-oriented approach for engineering the IT architecture. The article describes a reference functional model of a mining enterprise, on the basis of which the structure of the mining enterprise IT-architecture functional structure is determined. The function-oriented approach for engineering IT-architecture as a reflection of the business functional structure is a good example of the symmetry phenomena in enterprise management. Further research will be devoted to the issues of designing an information exchange model and a data architecture model for the mining value chain and its individual parts in interconnection, as well as reflecting end-to-end processes of mining enterprises in the IT architecture based on the developed model for determining the boundaries of functional blocks of information systems
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Industrial automation enterprises"

1

Babenko, Vitalina, O. I. Boichenko, and Yelyzaveta Koniaieva. "Efficiency of human resource management in industrial automation enterprises with prospects of innovative susceptibility." Thesis, Atlantis Press, Netherlands, 2019. http://repository.kpi.kharkov.ua/handle/KhPI-Press/42534.

Повний текст джерела
Анотація:
In modern conditions of innovative development, the most important resource of production companies and corporations is the innovative susceptibility (IS) of personnel. The key to this is an innovative organization of the personnel management system (HRMS). Accordingly, the task of the study is to analyze the typical HRMS structures of Ukrainian enterprises in comparison with the global ones in order to form an innovative HRMS development strategy and, on this basis, to increase IS of stuff. The goal of this study is to compare the levels of HRMS development in advanced global companies and Ukrainian enterprises in the field of industrial automation. As part of this study, methodological, statistical analysis method of technical and economic characteristics of Ukrainian and world leaders of enterprises in the field of industrial automation are used. As well as, comparative analysis method to characterize the organizational management structures of enterprises; method of expert and analytical assessments of HRMS, including analytical trend analysis to characterize the dynamics of the influence of the HRMS subsystems of industrial automation enterprises on the level of innovative susceptibility of personnel. The result of the study is to obtain an assessment of the impact of HRMS subsystems of industrial automation enterprises on the level of innovation susceptibility of personnel, as well as the formation of the potential field of innovation susceptibility of personnel based on measures to increase the innovation of organizational management systems of an enterprise.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bin, Nasir Muhammad Akash, and Abubakar Ismail Sada. "Stimulating Internationalization through digitalization : Digital competence in Swedish manufacturing SMEs." Thesis, Uppsala universitet, Företagsekonomiska institutionen, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-387820.

Повний текст джерела
Анотація:
Digital competence used to be a confusing concept, until recently when some researchers coined a comprehensive definition of digital competence and formulated a conceptual framework in an SME context. However, the framework was only at a conceptual level and required to be tested with the empirics of a qualitative or quantitative study. By an abductive qualitative approach, this research explored existing theories on digital competence and formulated a new digital competence framework in Swedish manufacturing SME perspective. Moreover, with cross-sectional study design, this research explored the role of digital competence in the internationalization process of six Swedish manufacturing firms, which is unprecedented in academic literature. Our findings indicate that digital competence is an evolving concept which develops gradually with technological advancements and requires a combination of three integral components: i) Digital technologies (basic and advanced level digitalization), ii) Automation of organizational processes, iii) Human resources who have the latest digital skills and are duly motivated to use these skills. This research affirms that after attaining digital competence Swedish manufacturing SMEs can sustain a competitive advantage in their international markets and it successfully facilitates in the firm’s internationalization process.
Digital kompetens brukade vara ett förvirrande koncept fram till nyligen när vissa forskare utarbetade en omfattande definition av digital kompetens och formulerade en konceptuell ram i ett små och medelstora sammanhang. Ramverket var dock endast på en konceptuell nivå och krävdes att testas med empiriken i en kvalitativ eller kvantitativ studie. Genom ett abduktivt kvalitativt tillvägagångssätt undersökte denna forskning befintliga teorier om digital kompetens och formulerade en ny digital kompetensram inom svenskt tillverkningspolitiskt perspektiv. Vidare undersökte denna undersökning rollen som digital kompetens i internationaliseringsprocessen av sex svenska tillverkningsföretag, vilket är enastående i den akademiska litteraturen. Våra resultat tyder på att digital kompetens är ett utvecklande koncept som utvecklas gradvis med tekniska framsteg och kräver en kombination av tre integrerade komponenter: i) Digital teknik (grundläggande och avancerad digitalisering), ii) Automatisering av organisationsprocesser, iii) Personal som har de senaste digitala färdigheterna och är vederbörligen motiverade att använda dessa färdigheter. Den här forskningen bekräftar att svenska tillverkare små och medelstora företag efter att ha uppnått digital kompetens kan upprätthålla en konkurrensfördel på sina internationella marknader och framgångsrikt underlättar företagets internationaliseringsprocess.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Mesquita, Victor Felix de. "Desenvolvimento de jogo didático para tornar prático o uso das atividades que contribuem para a melhoria de processo : elevação da alvenaria estrutural." Pós-Graduação em Engenharia Civil, 2014. https://ri.ufs.br/handle/riufs/5009.

Повний текст джерела
Анотація:
Construction companies seek improvements for their management systems. Therefore, they need to apply concepts, methods and lean techniques for the identification and subsequent elimination or reduction of activities that do not add value to the final product. In this context, there are activities that contribute to the improvement of construction processes. They are best practices that seek to eliminate factors that create interruptions in processes that occur at construction sites. The objective of this research was to develop a didactic game that helps managers to make practical the use of activities that contribute to the improvement of structural masonry construction process, to stimulate flow production continuity in construction sites and the elimination of wastes. The methodology was divided into two phases. The first was the literature review, and the second was divided into five stages related to field research, that involve the procedures required for the development and validation of the tool proposed in this research. For this, the following tasks were carried out: exploratory study, list of best practices, development, validation and application of a checklist; development of didactic game and its validation by the application in a group dynamics, primarily with researchers and later with the managers of three of the six construction sites researched. As a result of the preparation of the best practices list, it was found that the neglect of most of these activities could result in the occurrence of making-do and consequently in rework. The application of checklist showed that the managers use best practices in their daily. The application of the game confirmed the information observed in the field and provided an overview of the process by managers. From that emerged the main contribution of this study, which was the conclusion that the game is a teaching tool that can be used to train professionals in the identification of strengths and weaknesses related to management activities in construction process of structural masonry elevation. Thus, it is expected that managers look at the tool as a practical instrument to identify best practices in the construction process and that in the future the tool can be applied in other processes.
As empresas construtoras buscam melhorias de seus sistemas gerenciais. Para tanto, necessitam aplicar conceitos, métodos e técnicas enxutas, para a identificação e posterior eliminação ou redução de atividades que não agregam valor ao produto final. Nesse contexto, inserem-se as atividades que contribuem para a melhoria dos processos construtivos. São as boas práticas que buscam eliminar fatores que gerem interrupções nos processos que ocorrem nos canteiros de obras. Nesse sentido, o objetivo desta pesquisa foi desenvolver um jogo didático que auxilie os gerentes de obras no uso das atividades que contribuam para a melhoria do processo construtivo de elevação da alvenaria estrutural, de forma a estimular a continuidade dos fluxos de produção dentro dos canteiros de obras e a eliminação das perdas. A metodologia foi dividida em duas fases. A primeira tratou-se da revisão de literatura e a segunda, subdividida em cinco etapas relacionadas à pesquisa de campo, envolve os procedimentos necessários para o desenvolvimento e a validação de jogo didático proposto nesta pesquisa. Para isto, procedeu-se: realização de estudo exploratório; elaboração de lista de boas práticas; elaboração, validação e aplicação de checklist; desenvolvimento de jogo didático e sua validação através da aplicação em forma de dinâmica de grupo, primeiramente com pesquisadores e, posteriormente, com os gerentes de três dos seis canteiros de obras em que se desenvolveram os estudos. Como resultado da elaboração da lista de boas práticas, constatou-se que a negligência da maioria dessas atividades poderia resultar na ocorrência de perdas por making-do e, consequentemente, em retrabalhos. A aplicação do checklist nos canteiros mostrou que, mesmo sem perceber, os gerentes utilizam as boas práticas no seu dia a dia. O processo de aplicação do jogo simulativo confirmou as informações observadas em campo e proporcionou uma visão geral do processo pelos gerentes. A partir daí surgiu a principal contribuição deste estudo, o jogo didático proposto é uma ferramenta que pode ser utilizada para treinar profissionais na identificação de pontos fortes e frágeis relacionados com as atividades gerenciais no processo construtivo de elevação da alvenaria estrutural. Assim, espera-se que os gerentes vejam na ferramenta um instrumento prático para identificar boas práticas no processo construtivo e que no futuro a ferramenta seja aplicada em outros processos.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Lu, Hung-En, and 鹿鴻恩. "A Study on the Cloud-based Industrial automation Alert Service and Business Model Planning for the UNION Market Enterprise." Thesis, 2015. http://ndltd.ncl.edu.tw/handle/7m5532.

Повний текст джерела
Анотація:
碩士
國立中央大學
高階主管企管碩士班
103
Manufacturing requires a lot of manpower and equipment. Sudden disasters will inevitably cause severe loss to the manufacturer. Most widely available alert systems are unable to function in a real-time setting. A well designed network-based system, integrating hardware, software and networks, may fulfill the needs. This can be offered through a cloud-based service. This study propose an architecture for building a new generation alert system, based on the industrial automation monitoring system, incorporating sensor network technology to replace traditional human inspections to achieve effective early warnings. The proposed service will also assist companies to upgrade their management. Through well designed human-machine interface, massive data automatically collected through the senor network can be stored at a remote site. Effective use of the new data can result in new insights through mining of the “big data” that is unavailable before. The proposal simplified the operations, with three components, namely, installations of sensors, smart recorders for data collection and transmissions, and Web-based user interface for ease of use. In addition, this study also analyzed the possible business model, whereby the proposed system can generate enough value for the company. Two alternative service plans can be offered to customers. First, cloud-based service with service charge, in addition to sensor installations. Second, selling of the cloud-base system as a product so that customers can provide their in house service through a private cloud. The services can be customized to meet different customer needs. A feasibility study reveals the viability of the proposal.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Chang, Chen-chung, and 張振忠. "A Study on Service Quality, Satisfaction, and Loyalty for Repurchase Intentions at Enterprise Using New Technology Product of Industrial Automation - Especially for OPC Products." Thesis, 2008. http://ndltd.ncl.edu.tw/handle/15275656010093274365.

Повний текст джерела
Анотація:
碩士
國立高雄應用科技大學
商務經營研究所
96
The goal of this research is to verify the relationship between repurchase intensions and service quality, the degree of satisfaction as well as the loyalty. The result discovered that the research of service quality affection points out providing better service quality to be able to obtain better customer satisfactory achievements. And further, it will reduce the cost to attract new customers from the satisfied customers; besides, it will lead the influence to the unsatisfied customers. Speaking of the industry, the interdependence points out the brand image is affected not only by intrinsic quality process, but also the factors beyond the service. But the intension to purchase is affected both by customer relationship and service quality. According to the results of real diagnosis research, the following two conclusions would be obtained: (1) Service quality, customer satisfaction and loyalty are essential factors of repurchase intensions. The results of this research demonstrated: Service quality affects the customer satisfaction straight forwarded. Therefore hypothesis H1 is established. Customer satisfaction affects the loyalty straight forwarded. Therefore hypothesis H2 is established. Loyalty affects the repurchase intensions straight forwarded. Therefore hypothesis H3 is established. (2) Customer satisfaction is the most essential factor of repurchase intensions. The results of this research demonstrated: Customer satisfaction affects the repurchase intensions straight forwarded. Therefore hypothesis H4 is established.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

CHENG, WEISEN, and 鄭偉森. "A Study on the Influence of Brand Awareness, Customer Service Quality and Customer-Oriented Sales Model on the Willingness of Enterprise Procurement Decision-Making in the field of Industrial Automation Control Products." Thesis, 2019. http://ndltd.ncl.edu.tw/handle/hbf9r3.

Повний текст джерела
Анотація:
碩士
國立高雄師範大學
事業經營學系
107
With the trend of global Internet of Things, Industry 4.0 require AI and smart manufacturing, and the smart development goal of the government's "smart machinery", the machine tool and machinery industry has increased the demand for automation control. In addition, Taiwan faces low-birth rate and aging, and future labor. The problem of insufficient population, industrial automation control is to solve the problem of manpower shortage, human error and more precise process control to create better product quality. Therefore, in order to improve the competitiveness of products and pursue high-quality targets, the domestic manufacturing industry is increasing the degree of process automation control. This is the current trend of the industry. Especially under the torrent of Industry 4.0, it seems that the industry is transforming, saving manpower and improving smart manufacturing. It is already a strategy for industry survival and international competition. The purpose of this study is to understand the impact of brand awareness, customer service quality and customer-oriented sales models on the company's willingness to purchase. Therefore, taking Taiwan Yokogawa Co., Ltd. as an example, a questionnaire survey was conducted among its main customers, including on-site production process related, process design, R&D and procurement, and a total of 209 questionnaires were collected. Then using SPSS 24 statistical software to do data analysis and hypothesis testing, the results found: 1. Brand awareness has a positive and significant impact on corporate purchasing willingness. 2. Customer service quality has a positive and significant impact on corporate purchasing intentions 3. Customer-oriented sales model has a positive and significant impact on corporate purchasing willingness. So hoped that the results of this research can be used to understand the purchasing decision-making mode or factors of the relevant products in the industrial automatic control industry, so that the domestic industrial automatic control product suppliers can truly understand the customer's needs and provide real Products that meet customer needs and solve customer problems. Keywords: automatic control, industry 4.0, brand awareness, customer service quality, customer-oriented sales model.
Стилі APA, Harvard, Vancouver, ISO та ін.

Книги з теми "Industrial automation enterprises"

1

Intelligent enterprises of the 21st century. Hershey, PA: Idea Group Pub., 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Jayakumar, K. Dynamics of organisational transformation and executing change: Understanding business processes and architecting change : from a transdisciplinary practitioners perspective. New Delhi: Council of Scientific & Industrial Research, 2011.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Inc, Books24x7, ed. Building the innovative organization: Management systems that encourage innovation. New York: St. Martin's Press, 2000.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Goremykin, Sergey. Relay protection and automation of electric power systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1048841.

Повний текст джерела
Анотація:
The textbook describes the main issues of the theory of relay protection and automation of electric power systems. The structure and functional purpose of protection devices and automation of power transmission lines of various configurations, synchronous generators, power transformers, electric motors and individual electrical installations are considered. For each of the types of protection of the above objects, the structure, the principle of operation, the order of selection of settings are given, the advantages and disadvantages are evaluated, indicating the scope of application. The manual includes material on complete devices based on semiconductor and microprocessor element bases. The progressive use of such devices (protection of the third and fourth generations) is appropriate and effective due to their significant advantages. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is intended for students in the areas of training 13.03.02 "Electric power and electrical engineering" (profile "Power supply", discipline "Relay protection and automation of electric power systems") and 35.03.06 "Agroengineering" (profile "Power supply and electrical equipment of agricultural enterprises", discipline "Relay protection of electrical equipment of agricultural objects"), as well as for graduate students and specialists engaged in the field of electrification and automation of industrial and agrotechnical objects.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Bruce, Baggaley, ed. Practical lean accounting: A proven system for measuring and managing the lean enterprise. New York, NY: Productivity Press, 2004.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Scholl, Mechthild. Telekommunikationsmittel als Entscheidungskomponente betrieblicher Standortwahl. Köln: Selbstverlag im Wirtschafts- und Sozialgeographischen Institut der Universität zu Köln, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Garofalo, Giuseppe, ed. Capitalismo distrettuale, localismi d'impresa, globalizzazione. Florence: Firenze University Press, 2008. http://dx.doi.org/10.36253/978-88-8453-605-1.

Повний текст джерела
Анотація:
From the late Sixties on, industrial development in Italy evolved through the spread of small and medium sized firms, aggregated in district networks, with an elevated propensity to enterprise and the marked presence of owner-families. Installed within the local systems, the industrial districts tended to simulate large-scale industry exploiting lower costs generated by factors that were not only economic. The districts are characterised in terms of territorial location (above all the thriving areas of the North-east and Centre) and sector, since they are concentrated in the "4 As" (clothing-fashion, home-decor, agri-foodstuffs, automation-mechanics), with some overlapping with "Made in Italy". How can this model be assessed? This is the crucial question in the debate on the condition and prospects of the Italian productive system between the supporters of its capacity to adapt and the critics of economic dwarfism. A dispassionate judgement suggests that the prospects of "small is beautiful" have been superseded, but that the "declinist" view, that sees only the dangers of globalisation and the IT revolution for our SMEs is risky. The concept of irreversible crisis that prevails at present is limiting, both because it is not easy either to "invent", or to copy, a model of industrialisation, and because there is space for a strategic repositioning of the district enterprises. The book develops considerations in this direction, showing how an evolution of the district model is possible, focusing on: gains in productivity, scope economies (through diversification and expansion of the range of products), flexibility of organisation, capacity to meld tradition and innovation aiming at product quality, dimensional growth of the enterprises, new forms of financing, active presence on the international markets and valorisation of the resources of the territory. It is hence necessary to reactivate the behavioural functions of the entrepreneurs.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Fight, Andrew. E-processes. Oxford: Capstone Pub., 2002.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Cunningham, Jean E. Easier, simpler, faster: Systems strategy for lean IT. New York, N.Y: Productivity Press, 2007.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Nakamura, Hideichirō. Nihon sangyō no chiteki katsuryoku. Tōkyō: Tōyō Keizai Shinpōsha, 1985.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Частини книг з теми "Industrial automation enterprises"

1

Malyshev, Dmitry. "IT Technologies and Automation as Factors in Increasing Labor Productivity at Industrial Enterprises." In Intelligent Systems Applications in Software Engineering, 333–40. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-30329-7_30.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Schmidt, Edgar, and Dominik Henrich. "Playback Robot Programming Framework for Fiber Spraying Processes." In Annals of Scientific Society for Assembly, Handling and Industrial Robotics 2021, 351–62. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-74032-0_29.

Повний текст джерела
Анотація:
AbstractRobot-based automation is still not widespread in small and medium-sized enterprises, since programming industrial robots is usually costly and only feasible by experts. This disadvantages can be resolved by using intuitive robot programming approaches like playback programming. At the same time, there are currently not automatized automatized, like fiber spraying. We present a novel approach in programming a robot system for fiber spraying processes, which extends a playback programming framework inspired by video editing concepts. The resulting framework allows the programming of also the periphery devices needed for the fiber spraying process. We evaluated the resulting programming framework to measure the intuitiveness in the use and show that the framework is not only able to program fiber spraying tasks but is also rather intuitive to use for domain experts.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Voit, Nikolay, Sergey Kirillov, and Dmitry Kanev. "Automation of Workflow Design in an Industrial Enterprise." In Computational Science and Its Applications – ICCSA 2019, 551–61. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-24308-1_44.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kushnikov, Vadim, and Ekaterina Kulakova. "Development of a Set of Applications for Intelligent Control System of Compressor Facilities at an Industrial Enterprise." In Automation Control Theory Perspectives in Intelligent Systems, 141–51. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33389-2_14.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Li, Wen, Xiaolin Zuo, Xitao Ni, and Suxia Liu. "Research on the Evolution of Network Public Opinion of Safety Production Emergencies of Small and Medium-Sized Enterprises in High-Risk Industries Based on SIR Model." In Advances in Intelligent Automation and Soft Computing, 533–41. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-81007-8_61.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

John, Jobish, Amrita Ghosal, Tiziana Margaria, and Dirk Pesch. "DSLs and Middleware Platforms in a Model-Driven Development Approach for Secure Predictive Maintenance Systems in Smart Factories." In Lecture Notes in Computer Science, 146–61. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-89159-6_10.

Повний текст джерела
Анотація:
AbstractIn many industries, traditional automation systems (operating technology) such as PLCs are being replaced with modern, networked ICT-based systems as part of a drive towards the Industrial Internet of Things (IIoT). The intention behind this is to use more cost-effective, open platforms that also integrate better with an organisation’s information technology (IT) systems. In order to deal with heterogeneity in these systems, middleware platforms such as EdgeX Foundry, IoTivity, FI-WARE for Internet of Things (IoT) systems are under development that provide integration and try to overcome interoperability issues between devices of different standards. In this paper, we consider the EdgeX Foundry IIoT middleware platform as a transformation engine between field devices and enterprise applications. We also consider security as a critical element in this and discuss how to prevent or mitigate the possibility of several security risks. Here we address secure data access control by introducing a declarative policy layer implementable using Ciphertext-Policy Attribute-Based Encryption (CP-ABE). Finally, we tackle the interoperability challenge at the application layer by connecting EdgeX with DIME, a model-driven/low-code application development platform that provides methods and techniques for systematic integration based on layered Domain-Specific Languages (DSL). Here, EdgeX services are accessed through a Native DSL, and the application logic is designed in the DIME Language DSL, lifting middleware development/configuration to a DSL abstraction level. Through the use of DSLs, this approach covers the integration space domain by domain, technology by technology, and is thus highly generalizable and reusable. We validate our approach with an example IIoT use case in smart manufacturing.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Hage, Hassan, Emmanouil Seferis, Vahid Hashemi, and Frank Mantwill. "SMC4PEP: Stochastic Model Checking of Product Engineering Processes." In Fundamental Approaches to Software Engineering, 155–62. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-99429-7_9.

Повний текст джерела
Анотація:
AbstractProduct Engineering Processes (PEPs) are used for describing complex product developments in big enterprises such as automotive and avionics industries. The Business Process Model Notation (BPMN) is a widely used language to encode interactions among several participants in such PEPs. In this paper, we present SMC4PEPl as a tool to convert graphical representations of a business process using the BPMN standard to an equivalent discrete-time stochastic control process called Markov Decision Process (MDP). To this aim, we first follow the approach described in an earlier investigation to generate a semantically equivalent business process which is more capable of handling the PEP complexity. In particular, the interaction between different levels of abstraction is realized by events rather than direct message flows. Afterwards, SMC4PEPl converts the generated process to an MDP model described by the syntax of the probabilistic model checking tool PRISM. As such, SMC4PEPl provides a framework for automatic verification and validation of business processes in particular with respect to requirements from legal standards such as Automotive SPICE. Moreover, our experimental results confirm a faster verification routine due to smaller MDP models generated from the alternative event-based BPMN models.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Seidelson, Craig Eric. "Automation 4.0." In Advances in Computational Intelligence and Robotics, 29–49. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-5879-9.ch002.

Повний текст джерела
Анотація:
Factories have employed automation for nearly 100 years. With the launch of Industry 4.0 in 2011, operations have expanded their use of robots on an unprecedented scale. As of 2017, there were roughly 2 million industrial robots in use globally. By 2030, it's estimated that 20 million manufacturing jobs around the world could be replaced by robots. Yet, substantial hurdles remain before predicted level of automation can be realized. On the one hand, smart factories are almost exclusively multibillion-dollar enterprises. Their costs are simply too high for most manufacturers. On the other hand, intelligent machines are limited in what they can do because so many of the engineering tasks required to support them are still being done by people. Widespread use of automation requires expanding the use of artificial intelligence to manage data, create drawings, evaluate designs, and program machines.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Wong, Yue Chim Richard. "New Strategies Needed as Third Industrial Age Unfolds." In Fixing Inequality in Hong Kong. Hong Kong University Press, 2017. http://dx.doi.org/10.5790/hongkong/9789888390625.003.0029.

Повний текст джерела
Анотація:
Many today believe the world has entered the Third Industrial Age, during which technological improvements in robotics and automation will boost productivity and efficiency, implying significant gains for companies. These advancements have three biases: they tend to be capital-intensive (favoring those with financial resources), skill-intensive (favoring those with a high level of technical proficiency), and labor saving (reducing the total number of unskilled and semi-skilled jobs). The pundits speculate the economic impact on the job market will be significant and will present serious social and political challenges for society in growing inequality and the provision of safety nets to mitigate the consequences of disruptive technological progress. History has shown capitalist markets and business enterprises are incredibly efficient at turning technological advances into profitable businesses and providing incentives to discover new technologies. They succeed because companies that compete successfully with each other to provide benefits for clients are rewarded handsomely.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Ng, Hee Song. "Opportunities, Challenges, and Solutions for Industry 4.0." In Business Management and Communication Perspectives in Industry 4.0, 32–51. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9416-1.ch003.

Повний текст джерела
Анотація:
Industry 4.0 (I4.0) is the fourth industrial revolution sweeping through the world of manufacturing. This revolution integrates the current trend of intelligent automation with internet of things (IoT), big data, and artificial intelligence to bring about extraordinary technological innovation, economic growth, and tremendous progress to organizations of all shapes and sizes, on a magnitude beyond the current imagination. The disruptive technologies introduced by I4.0 represent a leap forward from more traditional automation to next generation industrial production based on fully web-based cyber-physical systems (CPS)s. To full understand the I4.0 concept and implementation, this chapter makes an in-depth analysis on the issues and controversies of I4.0, recent technological advancement, management and organizational concerns in terms of opportunities and threats, capital investment and skillsets, cybersecurity threat, ethics consideration, current challenges facing organizations and industry in terms of geopolitical domination, economic and social disenfranchisement, job destruction and job creation, the roles of multinational corporations, lack of technologies capabilities, lack of skillset, and skill mismatches. This chapter also makes suggestions for solutions and recommendations in terms of the role of government and incentives and grants; assessment tools; collaboration; the development of local companies and small and medium-sized enterprises (SMEs); upskilling, reskilling, and lifelong learning; education; universities and students; skilled graduates; and future research and directions.
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Industrial automation enterprises"

1

Chipulis, Valeri, and Roman Kuznetsov. "Automation of heat supply in industrial enterprises." In 2017 Tenth International Conference Management of Large-Scale System Development (MLSD). IEEE, 2017. http://dx.doi.org/10.1109/mlsd.2017.8109608.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Song, Yuexin, Xingong Cheng, and Yongfeng Zhang. "Energy Management optimization Strategy for Industrial Enterprises Based on Demand Response." In 2019 Chinese Automation Congress (CAC). IEEE, 2019. http://dx.doi.org/10.1109/cac48633.2019.8996931.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Borodin, Vitaly, Oleg Protalinskiy, and Igor Protalinskiy. "Decision Support System for Repair Management at Industrial Enterprises." In 2019 1st International Conference on Control Systems, Mathematical Modelling, Automation and Energy Efficiency (SUMMA). IEEE, 2019. http://dx.doi.org/10.1109/summa48161.2019.8947615.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Du, Rui-yang, Qing Li, Jian Zhou, and Ung Jo. "Industrial Automation System Integration Assessment of Large-Scale Steel Enterprises in China." In 2013 Fourth International Conference on Digital Manufacturing & Automation (ICDMA). IEEE, 2013. http://dx.doi.org/10.1109/icdma.2013.163.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Petrova, Aigul K., and Alexander M. Sinitca. "Application of Neural Networks in the Tasks of Automation at Industrial Enterprises." In 2021 IEEE Conference of Russian Young Researchers in Electrical and Electronic Engineering (ElConRus). IEEE, 2021. http://dx.doi.org/10.1109/elconrus51938.2021.9396114.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Gracheva, Elena, Alexey Gorlov, and Alsu Alimova. "Features of Structure of Electric Supply Systems of Industrial Enterprises." In 2020 2nd International Conference on Control Systems, Mathematical Modeling, Automation and Energy Efficiency (SUMMA). IEEE, 2020. http://dx.doi.org/10.1109/summa50634.2020.9280798.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ivanova, V. R., I. Yu Ivanov, and N. V. Rozhentsova. "Stand for Studying the Bases of Automation of Technological Processes of Industrial Enterprises." In 2020 International Multi-Conference on Industrial Engineering and Modern Technologies (FarEastCon). IEEE, 2020. http://dx.doi.org/10.1109/fareastcon50210.2020.9271420.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Babenko, Vitalina, Oleg Boichenko, and Yelyzaveta Koniaieva. "Efficiency of Human Resource Management in Industrial Automation Enterprises with Prospects of Innovative Susceptibility." In Proceedings of the 6th International Conference on Strategies, Models and Technologies of Economic Systems Management (SMTESM 2019). Paris, France: Atlantis Press, 2019. http://dx.doi.org/10.2991/smtesm-19.2019.24.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Рудник, Сергей Николаевич, Артем Иванович Смирнов, and Кристина Васильевна Матрохина. "MACHINE TO MACHINE PROTOCOLS IN INDUSTRIAL INTERNET OF THINGS." In Высокие технологии и инновации в науке: сборник избранных статей Международной научной конференции (Санкт-Петербург, Ноябрь 2020). Crossref, 2020. http://dx.doi.org/10.37539/vt188.2020.37.97.021.

Повний текст джерела
Анотація:
В статье рассматриваются наиболее часто используемые стандарты и протоколы интеллектуальных сетей для приложений, начиная от предприятий и центров управления до глобального мониторинга, автоматизации подстанций, распределенной генерации, реагирования на спрос, измерения. This article discusses the most commonly used smart grid standards and protocols for applications ranging from enterprises and control centers to global monitoring, substation automation, distributed generation, demand response, metering.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zongchun, Fu, Liu Zhicheng, and Tan Chuanwu. "Research on Carrier Communication Technology by Railway Train Catenary in Industrial and Mining Enterprises." In 2018 International Conference on Smart Grid and Electrical Automation (ICSGEA). IEEE, 2018. http://dx.doi.org/10.1109/icsgea.2018.00092.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Industrial automation enterprises" для конкретних типів джерел:
Статті в журналах Книги
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії