Добірка наукової літератури з теми "Hyper-compression"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Hyper-compression".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Hyper-compression"
Wenbin, Wu, Yue Wu, and Jintao Li. "The Hyper-spectral Image Compression Based on K-Means Clustering and Parallel Prediction Algorithm*." MATEC Web of Conferences 173 (2018): 03071. http://dx.doi.org/10.1051/matecconf/201817303071.
Повний текст джерелаWu, Wenbin, Yue Wu, and Xu Qiao. "Parallel Compression Based on Prediction Algorithm of Hyper-spectral Imagery." MATEC Web of Conferences 173 (2018): 03070. http://dx.doi.org/10.1051/matecconf/201817303070.
Повний текст джерелаJEŻ, ARTUR, and ANDREAS MALETTI. "HYPER-MINIMIZATION FOR DETERMINISTIC TREE AUTOMATA." International Journal of Foundations of Computer Science 24, no. 06 (September 2013): 815–30. http://dx.doi.org/10.1142/s0129054113400200.
Повний текст джерелаMalachy, Ronan, Nicholas Ward, Robert Sazdov, and Hyunkook Lee. "The Perception of Hyper-Compression by Mastering Engineers." Journal of the Audio Engineering Society 65, no. 7/8 (August 15, 2017): 613–21. http://dx.doi.org/10.17743/jaes.2017.0023.
Повний текст джерелаWen, Jia, Caiwen Ma, and Junsuo Zhao. "FIVQ algorithm for interference hyper-spectral image compression." Optics Communications 322 (July 2014): 97–104. http://dx.doi.org/10.1016/j.optcom.2014.02.016.
Повний текст джерелаSucharitha, B., and Dr K. Anitha Sheela. "Compression of Hyper Spectral Images using Tensor Decomposition Methods." International Journal of Circuits, Systems and Signal Processing 16 (October 7, 2022): 1148–55. http://dx.doi.org/10.46300/9106.2022.16.138.
Повний текст джерелаHu, Yueyu, Wenhan Yang, and Jiaying Liu. "Coarse-to-Fine Hyper-Prior Modeling for Learned Image Compression." Proceedings of the AAAI Conference on Artificial Intelligence 34, no. 07 (April 3, 2020): 11013–20. http://dx.doi.org/10.1609/aaai.v34i07.6736.
Повний текст джерелаLi, Jin, and Zilong Liu. "Compression of hyper-spectral images using an accelerated nonnegative tensor decomposition." Open Physics 15, no. 1 (December 29, 2017): 992–96. http://dx.doi.org/10.1515/phys-2017-0123.
Повний текст джерелаMALETTI, ANDREAS, and DANIEL QUERNHEIM. "UNWEIGHTED AND WEIGHTED HYPER-MINIMIZATION." International Journal of Foundations of Computer Science 23, no. 06 (September 2012): 1207–25. http://dx.doi.org/10.1142/s0129054112400485.
Повний текст джерелаYIN Chuan-li, 尹传历, and 李嘉全 LI Jia-quan. "Embedded Hyper-Spectral Image Compression System Based on Bit-plane." Chinese Journal of Liquid Crystals and Displays 27, no. 2 (2012): 245–49. http://dx.doi.org/10.3788/yjyxs20122702.0245.
Повний текст джерелаДисертації з теми "Hyper-compression"
Aspegren, Emil. "Mastering Engineers, Loudness and Hyper-Compression : A survey about practises, application goals and ideas about how they impact quality." Thesis, Luleå tekniska universitet, Medier ljudteknik och upplevelseproduktion och teater, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-69322.
Повний текст джерелаBonin, Vincent. "Modélisation analytique de la formation du copeau durant le procédé de déroulage du bois de hêtre." Phd thesis, Paris, ENSAM, 2006. http://pastel.archives-ouvertes.fr/pastel-00002062.
Повний текст джерелаTumbajoy, Spinel David. "Caractérisation du comportement mécanique de surfaces hyper-déformées par des phénomènes de contact." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSEM025/document.
Повний текст джерелаThe mechanical surface treatments confer better local mechanical properties against wear or fatigue service conditions. In the case of impact-based treatments, the material is exposed to repeated mechanical loadings, producing a severe plastic deformation in the near-surface. It leads to a local and progressive refinement of the microstructure into the affected zone, commonly known as Tribologically Transformed Surface (TTS). For this project, two mechanical surface treatments are used in a model material (pure α-iron): (i) shot-peening and (ii) micro-percussion.The resulting surfaces are characterized by a mechanical property gradient in-depth as a consequence of the microstructural transformation over a few tens of microns. Nowadays, it is well-known that this rise of local mechanical properties could improve the service lifetime of materials. However, a simple micro-hardness test is not quite enough to quantify precisely the engendered variation of mechanical properties and understand the influence of several microstructural effects. For this purpose, two micro-mechanical tests are considered: (i) nano-indentation and (ii) in situ micro-pillar compression.The main issue of this work is to characterize the mechanically-induced transformed surfaces and correlate the mechanical properties gradients with the local microstructural evolutions. Indeed, three main goals are considered: (i) quantify the mechanical and microstructural gradients induced by the surface treatments (shot-peening and micro-percussion), (ii) correlate the results obtained by the means of both mechanical tests (nano-indentation and micro-pillar compression) and finally (iii) investigate the influence of several microstructural effects related with the graded strengthening of hyper-deformed surfaces
Ju, Minglei. "Contribution à la modélisation du comportement visco-hyper-élastique de mousses de polyuréthane : Validation expérimentale en quasi-statique." Thesis, Mulhouse, 2014. http://www.theses.fr/2014MULH8865/document.
Повний текст джерелаFlexible polyurethane foam is widely used in numerous applications such as acoustic, thermal and building due to its low density and its ability to absorb thermal and acoustic energy. It is also used for the comfort of the seats such as the vehicle, train, plane due to its low stiffness and its ability to absorb deformation energy. In order to optimize the comfort of the car seat, it is necessary to model the behavior of seat system, particularly the flexible component - polyurethane foam. The main objective of this study is to identify and model the quasi-static behavior of polyurethane foam under different test conditions in large deformations. Compression / decompression uniaxial unicycle and multicycle tests were carried out on three types of polyurethane foam at different strain rates, which allows us to understand the behavior of the material. The results of the tests indicate that the polyurethane foams exhibit a hyperelastic behavior and a viscoelastic behavior under large deformations. They also showed that the polyurethane foams have a stress softening phenomenon which is called 'Mullins effect' during the compression / decompression multicycle tests. In other words, the stress in first cycle is lower than the stresses in the subsequent cycles in the same deformation. ‘Mullins effect’ for the polyurethane foam is also an important study in this dissertation. Based on the experimental results and the goal of modeling quasi-static behavior of the polyurethane foam, three visco-hyperelastic models were developed. These models consist in two elements: hyperelastic models, which is normally used for description the behavior of rubber materials, and entire memory model which takes into account the history and describing the viscoelastic behavior. Model parameters were identified using appropriate identification and optimization methods. The results of modeling the mechanical behavior of the foam on the unicycle and multicycle tests were compared with experimental results. The models showed a very good competence to simulate the first cycle and the following cycles during the charge / discharge tests. Our models have proven its ability to model Mullins effect on flexible polyurethane foams. These models have been validated on three types of foam in order to present a comparative study of their effectiveness and their representativeness
Bruno, Agostino Walter. "Étude du comportement hygro- mécanique de la terre crue hyper-compactée pour la construction durable." Thesis, Pau, 2016. http://www.theses.fr/2016PAUU3021/document.
Повний текст джерелаThe present work explores the hygro-mechanical behaviour of a raw earth material and investigates different stabilisation techniques to improve the durability of the material against water erosion. An extensive campaign of laboratory tests was performed on both unstabilised and stabilised materials at two different scales: small cylindrical samples and large bricks. An innovative manufacturing method based on the application of very high compaction pressures (hypercompaction) was proposed. Also, the compaction load was maintained constant for a sufficient period of time to allow soil consolidation. The main objective was to increase material density, thus improving mechanical performance. Samples compacted with the proposed method exhibited a dry density of about 2320 kg/m3, which is the highest value registered in the literature for an unstabilised earthen material. The effect of the compaction pressure on the material fabric was assessed by means of mercury intrusion porosimetry and nitrogen adsorption tests. Results showed that the increase of compaction pressure reduced material porosity with major effects on large inter-aggregate pores. On the contrary, small intra-aggregate pores were not affected by the mechanical compaction. Mechanical tests were then performed to measure stiffness and strength of both unstabilised and stabilised samples. These tests demonstrated that hypercompaction can largely improve the mechanical response of the material over conventional manufacturing methods. Hypercompacted bricks showed a compressive strength comparable with that of traditional building materials, such as stabilised compressed earth and fired bricks. The hygroscopic behaviour of both unstabilised and stabilised samples was investigated. The capacity of the samples to absorb/release water vapour was assessed by measuring their moisture buffering value (MBV). Results showed that unstabilised earth has an excellent capacity to buffer ambient humidity. This capacity was significantly reduced by the different stabilisation techniques tested in the present work. Finally, the durability against water erosion of both unstabilised and stabilised bricks was assessed by performing different tests prescribed by the norm DIN 18945 (2013). Stabilised bricks exhibited a higher resistance against water erosion compared to unstabilised bricks. Still, these materials cannot be adopted for structural applications exposed to natural weathering as indicated by the norm DIN 18945 (2013). Therefore, further investigation is required to identify novel stabilisation methods that can balance the needs of sustainability, durability, moisture buffering and mechanical performance
Shaha, Rony. "Experimental study of axial compressive behavior of a hyper-elastic annular seal constrained in a pipe." 2016. http://hdl.handle.net/1993/31750.
Повний текст джерелаOctober 2016
Taylor, Robert W. "Understanding the excessive use of hyper-compression in music production: a systems based approach to examining innovative change in the field of music production." Thesis, 2018. http://hdl.handle.net/1959.13/1389583.
Повний текст джерелаDescribed by a leading figure as the “destruction of an entire musical heritage” (Lund i/v, 2015), hyper-compression presents one of the most challenging issues facing Western mainstream popular music in the 21st Century. Historically, loudness has been utilised as a mechanism to influence consumer behaviour, taking advantage of the non-linearity of the human hearing mechanism. This process has been described as the “louder is better” paradigm. This paradigm conforms to an underlying belief that listeners consider louder music, both preferred and perceived, as sonically superior to that which is softer. During the so called “Loudness Wars” artists actively sought means to render their recordings as loud as possible, at times exceeding the medium’s limitations. Digital audio technology presented opportunities to significantly increase loudness levels, enabling the average level of an audio signal to be hyper-compressed, resulting in a greater perceived loudness when reproduced. This excessive use of compression, that is hyper-compression, can intercalate a range of undesirable artefacts such as non-linear distortion as various studies have shown. There is now a distinct tension between agent’s notions of loudness as a commercial imperative, its aesthetic intent and the integrity of the audio signal. This thesis attempts to address why hyper-compression is so prevalent in music production despite scientific evidence that denotes deleterious consequences. Its use in the field exhibits little signs of abatement and therefore appears to represent a dominant structural determinant by acting as a prerequisite for recordings to enter the market. Previous focused research has examined many individual causal factors but has failed to adequately explain why hyper-compression continues to be reproduced as a structure within the popular music field. It is argued here that the issue is representative of a multi-factorial set of conditions that are systemic in nature. The origins of these factors are also illustrative of both objective and subjective concerns, and as such, the methodology underpinning this research project reflects a constructionist ontological position, providing, in addition to the objective work on signal analysis confirming the effect of hyper-compression on recordings and audiences, the necessary foundation for a broader socio-cultural investigation. It is argued that there is a profoundly interrelated system of objective conditions that governs possibilities of action by agents operating in the field of Western mainstream popular music. Understanding why agents collectively engage with hyper-compression was the central aim of this study. To facilitate this aim, a framework was devised that accepts a systems perspective, drawing upon the theories of Csikszentmihalyi, Bourdieu and Rogers. The methodology employed reflects the underlying tenet of this framework, utilising a multi-strategy design of signal analysis and ethnography. Interviews were conducted with 29 industry participants in conjunction with the analysis of music recordings and audience reactions to them. Results indicate that despite the potential for loudness normalisation to mediate the immediate effects of the “louder is better” paradigm, there remains a multitude of factors in play that keep hyper-compression in use. All of the factors examined in this research collectively outweigh concerns focused on the quality of audio alone. It is further argued that a gradual and recursive change in the knowledge and symbolic structure of the domain of music production would be required to diminish the role of hyper-compression as a structural determinant, in a similar manner to the way it was instigated. The possibility of this occurring is discussed, with consideration to the multiple factors outlined in this thesis.
Частини книг з теми "Hyper-compression"
Subhash Babu, K., K. K. Thyagharajan, and V. Ramachandran. "Compression of Hyper-Spectral Images and Its Performance Evaluation." In Advances in Intelligent Systems and Computing, 599–609. New Delhi: Springer India, 2015. http://dx.doi.org/10.1007/978-81-322-2695-6_51.
Повний текст джерелаBlair, Peter. "Hyper-compression and the rise of the deep surface." In The Short Story in South Africa, 63–88. London: Routledge, 2022. http://dx.doi.org/10.4324/9781003226840-4.
Повний текст джерелаPrasad, V. B. S. Rajendra, and G. Venkata Rao. "Dynamic Hyper Elastic Behavior of Compression Shock Loaded Vibration Dampers." In Dynamic Behavior of Materials, Volume 1, 237–51. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-41132-3_33.
Повний текст джерелаLiou, N. S., Y. R. Jeng, S. F. Chen, G. W. Ruan, and K. T. Wu. "Developing Hyper-Viscoelastic Constitutive Models of Porcine Meniscus from Unconfined Compression Test Data." In Conference Proceedings of the Society for Experimental Mechanics Series, 111–15. New York, NY: Springer New York, 2011. http://dx.doi.org/10.1007/978-1-4614-0219-0_15.
Повний текст джерелаTeresa, V. V., J. Dhanasekar, V. Gurunathan, and T. Sathiyapriya. "An Efficient Technique for Image Compression and Quality Retrieval in Diagnosis of Brain Tumour Hyper Spectral Image." In Machine Learning and Deep Learning Techniques for Medical Science, 27–44. Boca Raton: CRC Press, 2022. http://dx.doi.org/10.1201/9781003217497-2.
Повний текст джерелаТези доповідей конференцій з теми "Hyper-compression"
Motta, Giovanni, Francesco Rizzo, and James A. Storer. "Compression of hyper/ultraspectral data." In Optics & Photonics 2005, edited by Bormin Huang, Roger W. Heymann, and Charles C. Wang. SPIE, 2005. http://dx.doi.org/10.1117/12.619612.
Повний текст джерела"Hyper Text Transfer Protocol Compression." In International conference on Innovative Engineering Technologies. International Institute of Engineers, 2014. http://dx.doi.org/10.15242/e1214042.
Повний текст джерелаTian, Nannan, Yong Liu, Weiping Wang, and Dan Meng. "Automatic CNN Compression Based on Hyper-parameter Learning." In 2021 International Joint Conference on Neural Networks (IJCNN). IEEE, 2021. http://dx.doi.org/10.1109/ijcnn52387.2021.9533329.
Повний текст джерелаZhang, Wei, Ming Dai, and Chuan-li Yin. "Compression of hyper-spectral images based on quadtree partitioning." In 2009 2nd IEEE International Conference on Computer Science and Information Technology. IEEE, 2009. http://dx.doi.org/10.1109/iccsit.2009.5234533.
Повний текст джерелаPonuma, R., R. Amutha, and B. Haritha. "Compressive Sensing and Hyper-Chaos Based Image Compression-Encryption." In 2018 Fourth International Conference on Advances in Electrical, Electronics, Information, Communication and Bio-Informatics (AEEICB). IEEE, 2018. http://dx.doi.org/10.1109/aeeicb.2018.8480989.
Повний текст джерелаQianwen, Liu, and Hu Bingliang. "The Hyper-Spectral Image Compression System Based on DSP." In 2008 International Workshop on Geoscience and Remote Sensing (ETT and GRS). IEEE, 2008. http://dx.doi.org/10.1109/ettandgrs.2008.270.
Повний текст джерелаYang, You, Gangyi Jiang, Mei Yu, and Dingju Zhu. "Parallel Process of Hyper-Space-Based Multiview Video Compression." In 2006 International Conference on Image Processing. IEEE, 2006. http://dx.doi.org/10.1109/icip.2006.312391.
Повний текст джерелаNallathai, P., S. Jeyakumar, and N. Nithiyanandam. "Hyper spectral image compression based on non-iterative matrix factorization." In 2013 IEEE International Conference on Computational Intelligence and Computing Research (ICCIC). IEEE, 2013. http://dx.doi.org/10.1109/iccic.2013.6724260.
Повний текст джерелаQiu-qiong, Chen, and Zhang Zhen-juan. "New video compression and encryption algorithm based on hyper-chaos." In 2012 9th International Conference on Fuzzy Systems and Knowledge Discovery (FSKD). IEEE, 2012. http://dx.doi.org/10.1109/fskd.2012.6233925.
Повний текст джерелаFeng, Xiaoyu, Jinshan Yue, Zhe Yuan, Huazhong Yang, and Yongpan Liu. "RL Based Network Accelerator Compiler for Joint Compression Hyper-Parameter Search." In 2020 IEEE International Symposium on Circuits and Systems (ISCAS). IEEE, 2020. http://dx.doi.org/10.1109/iscas45731.2020.9181238.
Повний текст джерела