Добірка наукової літератури з теми "Hygroscopic performance"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Hygroscopic performance".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Hygroscopic performance"
Yu, Shui, Yumeng Cui, Yifei Shao, and Fuhong Han. "Research on the Comprehensive Performance of Hygroscopic Materials in an Office Building Based on EnergyPlus." Energies 12, no. 1 (January 8, 2019): 191. http://dx.doi.org/10.3390/en12010191.
Повний текст джерелаWong, E. H., R. Rajoo, S. W. Koh, and T. B. Lim. "The Mechanics and Impact of Hygroscopic Swelling of Polymeric Materials in Electronic Packaging." Journal of Electronic Packaging 124, no. 2 (May 2, 2002): 122–26. http://dx.doi.org/10.1115/1.1461367.
Повний текст джерелаWang, Feng Xian, Fu Xin Yang, and Xue Mei Liu. "Preparation and Performance Study of Hygroscopic Film." Applied Mechanics and Materials 200 (October 2012): 360–64. http://dx.doi.org/10.4028/www.scientific.net/amm.200.360.
Повний текст джерелаWang, Ying, and Li Ren Fan. "Preparation and Hygroscopic Property of the Polyacrylamide/MgCl2 Hybrid Hydrogel." Advanced Materials Research 550-553 (July 2012): 904–7. http://dx.doi.org/10.4028/www.scientific.net/amr.550-553.904.
Повний текст джерелаCai, Chenyang, and Fanding Zhou. "Sorption Characteristic of Thermally Modified Wood at Varying Relative Humidity." Forests 13, no. 10 (October 14, 2022): 1687. http://dx.doi.org/10.3390/f13101687.
Повний текст джерелаSandberg, H. G. O., T. G. Bäcklund, R. Österbacka, and H. Stubb. "High-Performance All-Polymer Transistor Utilizing a Hygroscopic Insulator." Advanced Materials 16, no. 13 (July 5, 2004): 1112–15. http://dx.doi.org/10.1002/adma.200400030.
Повний текст джерелаCui, Yi, Shuyi Gao, Ruiyun Zhang, Longdi Cheng, and Jianyong Yu. "Study on the Moisture Absorption and Thermal Properties of Hygroscopic Exothermic Fibers and Related Interactions with Water Molecules." Polymers 12, no. 1 (January 4, 2020): 98. http://dx.doi.org/10.3390/polym12010098.
Повний текст джерелаKumari, Pinki, Kuldeep Singh, and Anuj Singal. "Reducing the Hygroscopic Swelling in MEMS Sensor using Different Mold Materials." International Journal of Electrical and Computer Engineering (IJECE) 10, no. 1 (February 1, 2020): 494. http://dx.doi.org/10.11591/ijece.v10i1.pp494-499.
Повний текст джерелаRuivo, C. R., J. J. Costa, and A. R. Figueiredo. "On the behaviour of hygroscopic wheels: Part II – rotor performance." International Journal of Heat and Mass Transfer 50, no. 23-24 (November 2007): 4823–32. http://dx.doi.org/10.1016/j.ijheatmasstransfer.2007.03.004.
Повний текст джерелаBUSS TESSARO, ALESSANDRA, RAFAEL DE AVILA DELUCIS, SANDRO CAMPOS AMICO, DARCI ALBERTO GATTO, and MARGARETE REGINA FREITAS GONÇALVES. "CEMENT COMPOSITES REINFORCED WITH TEOS-TREATED WOOD FIBRES." Cellulose Chemistry and Technology 55, no. 1-2 (February 12, 2021): 141–47. http://dx.doi.org/10.35812/cellulosechemtechnol.2021.55.15.
Повний текст джерелаДисертації з теми "Hygroscopic performance"
RONZINO, AMOS. "Influence of hygroscopic interior finishing on indoor comfort conditions." Doctoral thesis, Politecnico di Torino, 2014. http://hdl.handle.net/11583/2549737.
Повний текст джерелаJain, Dharamdeep. "Humidity Driven Performance of Biological Adhesives." University of Akron / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=akron1510053266807976.
Повний текст джерелаKamble, Sharad R. "Molecular interactions in pharmaceutical preformulation and supramolecular complexes. Structural properties governing drug-plasma protein binding and investigation of amino acids co-crystals." Thesis, University of Bradford, 2018. http://hdl.handle.net/10454/16882.
Повний текст джерелаZhu, Yin. "A Rapid, Small-Scale Method for Improving Fermentation Medium Performance." The University of Waikato, 2007. http://hdl.handle.net/10289/2444.
Повний текст джерелаLabat, Matthieu. "Chaleur - Humidité - Air dans les maisons à ossature bois : Expérimentation et modélisation." Phd thesis, INSA de Lyon, 2012. http://tel.archives-ouvertes.fr/tel-00790809.
Повний текст джерелаChiu, Tsai-Wei, and 邱采薇. "Improvement of PEMFC Performance by Coating Hygroscopic ZnO on the Anodic Catalyst Layer." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/61392048851027272246.
Повний текст джерела國立中興大學
材料科學與工程學系所
98
In the past decade, the awareness of environment preservation and the rapid increase of global oil price have aroused the investigation of new energy resources applied in transportation, portable devices and stationary equipments in the near future. Proton exchange membrane fuel cells (PEMFCs), which employ Nafion® membrane as solid proton conducting membrane, with several advantages such as high energy density, high energy conservation efficiency and near-zero pollutant are recognized as a promising alternative to be widely applied in transportation, residence and portable devices in the near future. However, a severe decrease in proton conductivity of Nafion® membrane is observed when operating temperature increases to 100℃. This phenomenon is attributed to the low hydration level of Nafion® membrane caused by serious water loss at high temperature and, therefore, limits the operation temperature of PEMFCs. Generally, for operating PEMFCs at the temperature higher than 120℃, an external humidifying system used to maintain appropriate hydration level of Nafion® membrane is indispensable. Nevertheless, this excess humidifying system increases the complexity of the PEMFC structure which poses a great obstacle to the commercialization of PEMFCs. Thus, to solve this problem, a versatile membrane electrode assembly (MEA) capable of maintaining optimum hydration level at dehydration conditions without the assistance of external humidifying system is desired This study aims to investigate the feasibility of coating hygroscopic zinc oxide, which used as water adsorbent due to the Lewis acid sites distributed over it surface, on the anodic catalyst layer to main appropriate hydration level at anode under dehydration condition. Different anode humidifier temperatures at 25 ℃, 45 ℃, 55 ℃ and 65 ℃ were designed to investigate the influence of anode humidification conditions on cell performance. The temperature of cell and the cathode humidifier were both fixed at 60 ℃. The polarization measurement was conducted at ambient conditions. It was found that cell with anode catalyst layer coated with 30 seconds zinc oxide revealed the best performance at anode humidifier temperatures ranging from 25 to 65 ℃ due to the smallest negative influence on electronic resistance.
Chao, Wen-Kai, and 趙文愷. "Effect of adding hygroscopic metal and metal oxide particles in the anode catalyst layer on the PEMFC performance by PVD and ultrasonic techniques." Thesis, 2011. http://ndltd.ncl.edu.tw/handle/70576240352246007945.
Повний текст джерела國立中興大學
材料科學與工程學系所
99
An adequate water management system to avoid the drying and flooding phenomena of the membrane electrode assembly (MEA) and an effective CO-tolerant catalyst are still the two main challenges needed to be overcome. Since the CO-poisoning phenomenon is induced by the low operation temperature (<100℃) of PEMFC limited by inappropriate water management, a well-established adequate water management system could solve these two challenges simultaneously. This study aims to investigate the feasibility of fabricating composite anode catalyst layer to increase the wettability of MEA at low humidity condition and then improve the performance of PEMFC. For fabricating composite anode catalyst layer, commercial and homemade ZnO hygroscopic particles were firstly added into the anode catalyst layer by ultrasonic technique. Secondly, island-like TiOx nano-particles were deposited on the surface of anode catalyst layer by direct sputtering for easing the negative effect caused by the inherent high electrical resistance of the hygroscopic metal oxide particles, by reducing the amount of hygroscopic metal oxide particles addition with same wettability improvement. Finally, Ti and Ti-V-Cr alloy were used as water adsorbent to be deposited on the surface of anode catalyst layer by direct sputtering for solving the dilemma caused by the inherent high electrical resistance of the hygroscopic metal oxide particles. To sum up, among all the specimens in which ZnO particles were added to the anode catalyst layer, the MEA with 10% ZnO particles addition exhibits the highest current density at different anode humidifier temperatures ranging from 25 to 65℃. Furthermore, the MEAs with anode sputtered by Ti all revealed better performance improvement than that sputtered with TiOx at low humidifying temperature (25, 45℃) even the TiOx-supttered anode showed better wettability than that of Ti-sputtered. At anode humidifier temperature 25℃ and 45℃, the highest improvement of Ti-V-Cr-sputtered MEAs with 100V bias were 35% and 26%, which are higher than the MEAs added with ZnO, sputtered with Ti and sputtered with TiOx. For the MEAs with transition metal oxide water adsorbent (ZnO and TiOx) at anode, the cell performance is determined by a competition mechanism between wettability and the variation of electrical resistance caused by transition metal oxide water adsorbent addition. Furthermore, for the MEAs with metal adsorbent, the cell performance was mainly determined by a competition mechanism between the positive effect arose from the enhancement of wettability of anodic catalyst layer and the negative effect of flooding induced by the excess hygroscopic metal (Ti and Ti-V-Cr).
Yeh, Yao-Ting, and 葉耀婷. "The performances of silicates hygroscopic materials." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/39337948595900654952.
Повний текст джерела元智大學
化學工程與材料科學學系
97
The purpose of this research is to study the performances of silicates hygroscopic materials(diatomaceous, zeolite powder and meerschaum powder). About the tooling, we use SEM to observe sample external, XRD to analyse contents, MIP to analyse the size of apertures, BET to measure sample superficies. Furthermore we also to control the environment humidity to compare the hygroscopic ability of each sample.
Частини книг з теми "Hygroscopic performance"
Olofinjana, Ayodele, Nicholas Jays, David Young, Jitendra Mata, and Rezwanul Haque. "Hygroscopic Performance of Sulphate-Based MgO Construction Boards." In Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering, 390–401. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-90532-3_30.
Повний текст джерелаRamos, Nuno M. M., and Vasco Peixoto de Freitas. "The Evaluation of Hygroscopic Inertia and Its Importance to the Hygrothermal Performance of Buildings." In Advanced Structured Materials, 25–45. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21966-5_2.
Повний текст джерелаSaxena, Gaurav, and M. K. Gaur. "Case Study on Thermal and Drying Performance Index of Hybrid Solar Dryer with Evacuated Collector." In Solar Thermal Systems: Thermal Analysis and its Application, 301–21. BENTHAM SCIENCE PUBLISHERS, 2022. http://dx.doi.org/10.2174/9789815050950122010015.
Повний текст джерелаТези доповідей конференцій з теми "Hygroscopic performance"
Perier-Muzet, Maxime, Timea Béjat, Monika Woloszyn, Yannick-Ariel Kêdowidé, Catherine Buhé, and Etienne Wurtz. "Evaluation of the Contribution of Highly Hygroscopic And Vapour Permeable Walls to Whole Building Performance." In 2015 Building Simulation Conference. IBPSA, 2015. http://dx.doi.org/10.26868/25222708.2015.2525.
Повний текст джерелаBastien, Diane, and Martin Winther-Gaasvig. ""Hygrothermal Performance of a Hygroscopic and Permeable Wall Assembly: Impact of a Vented Wall Cavity"." In 7th International Building Physics Conference. Syracuse, New York: International Association of Building Physics (IABP), 2018. http://dx.doi.org/10.14305/ibpc.2018.be-9.02.
Повний текст джерелаZhu, Dongsheng, Xuebo Li, Huijun Wu, and Nan Wang. "Performance Analysis of Composite Sorbents in Thermal Energy Storage System." In 2007 First International Conference on Integration and Commercialization of Micro and Nanosystems. ASMEDC, 2007. http://dx.doi.org/10.1115/mnc2007-21588.
Повний текст джерелаMian, Ahsan, and Jesse Law. "Finite Element Analysis of Laser Fabricated Microjoint Performance in Cerebrospinal Fluid." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33900.
Повний текст джерелаRad, Milad Rezvani, André McDonald, Morvarid Mohammadian Bajgiran, and Christian Moreau. "Microstructural and Performance Analyses of Thermally Sprayed Electric Resistance Heating Systems as De-Icing Elements." In ITSC2019, edited by F. Azarmi, K. Balani, H. Koivuluoto, Y. Lau, H. Li, K. Shinoda, F. Toma, J. Veilleux, and C. Widener. ASM International, 2019. http://dx.doi.org/10.31399/asm.cp.itsc2019p0512.
Повний текст джерелаDutra, Thiago Assis, Catarina Costa, João R. Matos, Bruna F. Oliveira, Luís Miguel Oliveira, and Cristiano Pereira Coutinho. "Effects of Printing Parameters on Geometrical and Mechanical Properties of 3D-Printed High-Performance Thermoplastics, Toward the Digitalization of Power Transformers." In 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-91989.
Повний текст джерелаBergero, Stefano, Anna Chiari, and Enrico Nannei. "Vapour Compression and Liquid Desiccant Hybrid System for Air Conditioning." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95541.
Повний текст джерелаRippy, Kerry, Judith Vidal, Shuang Cui, and Sumanjeet Kaur. "Mitigation of Leakage and Water Ingress for a Promising Phase Change Material (PCM) Containing Polyethylene Glycol (PEG)." In ASME 2022 16th International Conference on Energy Sustainability collocated with the ASME 2022 Heat Transfer Summer Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/es2022-85563.
Повний текст джерелаKong, Xujie, Ying Yu, Yuqiu Yang, Jungang Li, Mengyuan Liao, and Manabu Nomura. "Mechanical Property and Degradation in Hot Water of Injection Molded Glass Short Fiber/Wood Powder/Polypropylene Hybrid Composites." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-64475.
Повний текст джерелаBollina, Ravi, Janet Landgraf, Hannes Wagner, Robert Wilhelm, Sven Knippscheer, Gerhard Mitic, and Svetlana Levchuck. "Thermal Reliability and Environmental Testing of Advanced Metal Diamond Composites." In ASME 2007 InterPACK Conference collocated with the ASME/JSME 2007 Thermal Engineering Heat Transfer Summer Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/ipack2007-33028.
Повний текст джерела