Добірка наукової літератури з теми "Hydromechanical power transfers"

Two-flow hydromechanical transmissions are becoming increasingly common in the construction of modern land transport and traction machines (tractors, automobile and high-speed crawler vehicles). This is mainly due to the desire to increase the efficiency of transmission. In order to select a dual-flow hydromechanical transmission scheme in relation to specific operating conditions, it is necessary to know the advantages and disadvantages of various schemes, their potential capabilities. The evaluation of the operation of each circuit can be made on the basis of their kinematic, power, and energy analysis. The results of the kinematic and force analysis of two-flow hydromechanical gears were previously developed by the authors of this article. In energy analysis, the following estimated parameters were used to compare the performance of the transmission: г|ГМП - efficiency of transmission; РМ - power factor in the mechanical branch of the transmission; РН - power factor on the pump wheel of the torque converter; РТ - the power factor on the turbine wheel of the torque converter. The paper considers 12 schemes of two-flow hydrome-chanical gears with a differential link at the input and output with mixed gear coupling, the results of their energy analysis are given. For each of the schemes considered, analytical dependencies of the estimated parameters on the internal parameters of the hydromechanical transmission were obtained, which were used as the characteristic k of the planetary gear set, the power transfer ratio йгт of the torque converter, and the kinematic gear ratio игмп of the hydromechanical transmission. The results of calculations performed on a computer using the external characteristic of a specific torque converter are obtained and presented in graphical form. The obtained results can be used in developing recommendations for the choice of a two-flow hydromechanical transmission scheme.

The stability and reliability of hydraulic control system have a direct bearing on the overall dynamic performance of the press machine. Hydromechanical analysis on the hydraulic control system is of theoretical and practical significance to improving the transmission performance and structural design of the entire press machine. From a quantitative perspective, this paper firstly analyzes the fluid transmission features of the hydraulic control system for the press machine, and presents the fluid transmission route and design drawings of the hydraulic control system. The next step is the design of the hydraulic control system. The authors specified the steps of design and calculation for the hydraulic control cylinder, and the principles for determining the power of the diesel engine. After that, experiments were carried out to verify the dynamic and static features of the designed system, and prove that our system is scientific and rational.

The use of discrete-pulse energy input (DPEI) mechanisms in various industries has become a reliable tool for the intensification of heat and mass transfer processes in various technological lines and reduction of specific energy consumption. The study of structural transformations in heterogeneous systems under influence of mechanisms of DPEI opens up new possibilities for their use as evidenced by this article. Under certain conditions it is possible to prepare a mushroom suspension with specified characteristics for drying and enhance medicinal properties of the obtained powder product while retaining all valuable components of feedstock. The article presents the results of research of DPEI-processing effect of the shiitake mushroom fruit body on the on physical and mechanical properties and structural characteristics of the mushroom suspension. The influence of hydro module, temperature of the suspension and the layout of the working bodies of the rotor-pulse apparatus (RPA) on its dynamic viscosity was studied and the possibility of reducing viscosity by 2-3 times is shown. An analysis of mushroom suspension microstructure has showed that with a certain layout of the working bodies of the RPA it is possible to control the degree of dispersion of particles and change the spatial structure of the aggregates in the volume of the dispersion medium. It is determined that self-organization of spatial aggregates from individual hyphae in such suspensions occurs over time. Moreover, the smaller the size of hyphae (≤ 25 microns after the RPA of the first version of the arrangement: rotor-stator-rotor) are, the larger the size of the spatial aggregates are formed. After the RPA with the second layout option, the fragments of hyphae had sizes ≥ 50 μm, but the dimensions of the spatial aggregates were three times smaller. It is found that after three times passing of the mushroom suspension through the RPA and its subsequent treatment in the cavitation device, the dynamic viscosity of the suspension is reduced by 20%. Confirmation of the the effectiveness of the DPEI-mechanisms in obtaining mushroom suspension is that due to the hydromechanical destruction of the polysaccharide structures of the chitin-glucan complex of the shiitake mushroom the content of the bioavailable complex of water-soluble oncostatic and immunoregulatory polysaccharides in the powder obtained by drying the mushroom suspension in an experimental spray dryer increased 6 times. References 13, figures 6.

Summary Accounting for poro-mechanical effects in full-field reservoir simulation studies and uncertainty quantification workflows is still limited, mainly because of their high computational cost. We introduce a new approach that couples hydrodynamics and poro-mechanics with dual-porosity flow diagnostics to analyze how poro-mechanics could affect reservoir dynamics in naturally fractured reservoirs without significantly increasing computational overhead. Our new poro-mechanically informed dual-porosity flow diagnostics account for steady-state and single-phase flow conditions in the fractured medium while the fracture-matrix fluid exchange is approximated using a physics-based transfer rate coefficient, which models two-phase flow using an analytical solution for spontaneous imbibition or gravity drainage. The deformation of the system is described by the dual-porosity poro-elastic theory, which is based on mixture theory and micromechanics to compute the effective stresses and strains of the rock matrix and fractures. The solutions to the fluid flow and rock deformation equations are coupled sequentially. The governing equations for fluid flow are discretized using a finite-volume method with two-point flux-approximation while the governing equations for poro-mechanics are discretized using the virtual element method. The solution of the coupled system considers stress-dependent permeabilities for fractures and matrix. Our framework is implemented in the open-source MATLAB Reservoir Simulation Toolbox (MRST). We present a case study using a fractured carbonate reservoir analog to illustrate the integration of poro-mechanics within the dual-porosity flow diagnostics framework. The extended flow diagnostics calculations enable us to quickly screen how the dynamics in fractured reservoirs (e.g., reservoir connectivity, sweep efficiency, and fracture-matrix transfer rates) are affected by the complex interactions between poro-mechanics and fluid flow where changes in pore pressure and effective stress modify petrophysical properties and hence affect reservoir dynamics. Because of the steady-state nature of the calculations and the effective coupling strategy, these calculations do not incur significant computational overheads. They provide an efficient complement to traditional reservoir simulation and uncertainty quantification workflows because they enable us to assess a broader range of reservoir uncertainties (e.g., geological, petrophysical, and hydromechanical uncertainties). The capability of studying a much broader range of uncertainties allows the comparison and ranking from a large ensemble of reservoir models and select individual candidates for more detailed full-physics reservoir simulation studies without compromising on assessing the range of uncertainties inherent to fractured reservoirs.

Представлен краткий обзор существующих в настоящее время подходов к моделированию динамических процессов в силових передачах транспортных машин, содержащих объемные гидропередачи.
brief review of the currently available approaches to the modeling of dynamic processes in the power transmission of transport vehicles containing volumetric hydrotransfers is presented.