Статті в журналах з теми "Hybrid Injection Molding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Hybrid Injection Molding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
TOMARI, Kiyotaka. "Hybrid Injection Molding Process." Kobunshi 47, no. 9 (1998): 665–68. http://dx.doi.org/10.1295/kobunshi.47.665.
Повний текст джерелаAsanuma, Nobuyuki. "Applying Direct Injection Molding Process and Hybrid Molding System to CFRP Molding." Seikei-Kakou 27, no. 3 (February 20, 2015): 89–93. http://dx.doi.org/10.4325/seikeikakou.27.89.
Повний текст джерелаChen, Wei, Xian Hong Han, Xiong Hui Zhou, and Xue Wei Ge. "Hybrid Optimization Approach for Gas-Assisted Injection Molding Based on Metamodeling and Particle Swarm Algorithm." Advanced Materials Research 97-101 (March 2010): 3353–56. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3353.
Повний текст джерелаFrick, Achim, and Marcel Spadaro. "Injection Molded Aluminum-Polymer-Composites - Integral Lightweight Structures with Potential." Key Engineering Materials 742 (July 2017): 381–88. http://dx.doi.org/10.4028/www.scientific.net/kem.742.381.
Повний текст джерелаHirsch, Patrick, Marianne John, Daniel Leipold, André Henkel, Sylvia Gipser, Ralf Schlimper, and Matthias Zscheyge. "Numerical Simulation and Experimental Validation of Hybrid Injection Molded Short and Continuous Fiber-Reinforced Thermoplastic Composites." Polymers 13, no. 21 (November 7, 2021): 3846. http://dx.doi.org/10.3390/polym13213846.
Повний текст джерелаLing, Wei. "PID Control of Hybrid Injection Molding Machine Temperature." Advanced Materials Research 753-755 (August 2013): 2607–11. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.2607.
Повний текст джерелаLiao, Xiao Ping, Ting Ruan, Wei Xia, Jun Yan Ma, and Liu Lin Li. "Multi-Objective Optimization by Gaussian Genetic Algorithm and its Application in Injection Modeling." Advanced Materials Research 399-401 (November 2011): 1672–76. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.1672.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." Materials Science Forum 534-536 (January 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.
Повний текст джерелаTomioka, Masao, Takeshi Ishikawa, Akira Inoue, and Tatsuya Tanaka. "Influence of Molding Conditions in Hybrid Injection Molding on Interfacial Adhesion between Inserted and Injection-molded Materials." Seikei-Kakou 30, no. 4 (March 20, 2018): 170–77. http://dx.doi.org/10.4325/seikeikakou.30.170.
Повний текст джерелаPetrova, Tatiana, and David Kazmer. "Hybrid neural models for pressure control in injection molding." Advances in Polymer Technology 18, no. 1 (1999): 19–31. http://dx.doi.org/10.1002/(sici)1098-2329(199921)18:1<19::aid-adv3>3.0.co;2-u.
Повний текст джерелаBurmeister, Frank, Jan Hagen, Joern Denter, Marco Wirth, Alexander Fromm, and Guenter Kleer. "Hybrid Inorganic-Organic Functional Coatings for Injection Molding Applications." Plasma Processes and Polymers 6, S1 (June 2009): S1—S5. http://dx.doi.org/10.1002/ppap.200930102.
Повний текст джерелаKirchheim, Andreas, Yogeshkumar Katrodiya, Livia Zumofen, Frank Ehrig, and Curdin Wick. "Dynamic conformal cooling improves injection molding." International Journal of Advanced Manufacturing Technology 114, no. 1-2 (March 8, 2021): 107–16. http://dx.doi.org/10.1007/s00170-021-06794-0.
Повний текст джерелаSönmez, D., and A. A. Eker. "Numerical Simulation and Process Optimization of a 3D Thin-Walled Polymeric Part Using Injection Compression Molding." International Polymer Processing 36, no. 4 (September 1, 2021): 459–67. http://dx.doi.org/10.1515/ipp-2020-4075.
Повний текст джерелаLlewelyn, Rees, Griffiths, and Jacobi. "A Novel Hybrid Foaming Method for Low-Pressure Microcellular Foam Production of Unfilled and Talc-Filled Copolymer Polypropylenes." Polymers 11, no. 11 (November 17, 2019): 1896. http://dx.doi.org/10.3390/polym11111896.
Повний текст джерелаChen, Tianran, Dana Kazerooni, Lin Ju, David A. Okonski, and Donald G. Baird. "Development of Recyclable and High-Performance In Situ Hybrid TLCP/Glass Fiber Composites." Journal of Composites Science 4, no. 3 (August 24, 2020): 125. http://dx.doi.org/10.3390/jcs4030125.
Повний текст джерелаFurusawa, Tsuyoshi. "Eco-Friendly Injection Molding Machine (Hybrid Type) FVX-III series." Seikei-Kakou 26, no. 12 (November 20, 2014): 572. http://dx.doi.org/10.4325/seikeikakou.26.572.
Повний текст джерелаTurng, L. S., and H. Kharbas. "Development of a Hybrid Solid-Microcellular Co-injection Molding Process." International Polymer Processing 19, no. 1 (March 2004): 77–86. http://dx.doi.org/10.3139/217.1806.
Повний текст джерелаKAKISHITA, Kenichi, Kazuaki NISHIYABU, and Shigeo TANAKA. "2722 Micro Metal Injection Molding Using Hybrid Micro/Nano Powder." Proceedings of the JSME annual meeting 2006.1 (2006): 173–74. http://dx.doi.org/10.1299/jsmemecjo.2006.1.0_173.
Повний текст джерелаLiu, Z. Y., D. Kent, and G. B. Schaffer. "Powder Injection Molding of Al-(Steel and Magnet) Hybrid Components." Metallurgical and Materials Transactions A 40, no. 12 (October 10, 2009): 2785–88. http://dx.doi.org/10.1007/s11661-009-0012-1.
Повний текст джерелаGanesh, G. Dongre, S. Chaitanya Sarang, and M. Jonnalagadda Sai. "Design, Optimization and Validation of Conformal Cooling Technique for Additively Manufactured Mold Insert." Journal of Physics: Conference Series 2070, no. 1 (November 1, 2021): 012225. http://dx.doi.org/10.1088/1742-6596/2070/1/012225.
Повний текст джерелаZhao, Zhongguo, Xin Zhang, Qi Yang, Taotao Ai, Shikui Jia, and Shengtai Zhou. "Crystallization and Microstructure Evolution of Microinjection Molded Isotactic Polypropylene with the Assistance of Poly(Ethylene Terephthalate)." Polymers 12, no. 1 (January 16, 2020): 219. http://dx.doi.org/10.3390/polym12010219.
Повний текст джерелаGebauer, J., M. Fischer, A. F. Lasagni, I. Kühnert, and A. Klotzbach. "Laser structured surfaces for metal-plastic hybrid joined by injection molding." Journal of Laser Applications 30, no. 3 (August 2018): 032021. http://dx.doi.org/10.2351/1.5036803.
Повний текст джерелаSchift, Helmut, Prabitha Urwyler, and Per Magnus Kristiansen. "Surface-patterned micromechanical elements by polymer injection molding with hybrid molds." Journal of Vacuum Science & Technology B, Nanotechnology and Microelectronics: Materials, Processing, Measurement, and Phenomena 31, no. 6 (November 2013): 06FD01. http://dx.doi.org/10.1116/1.4821649.
Повний текст джерелаSerban, Daniiel, Giuseppe Lamanna, and Constantin Gheorghe Opran. "Mixing, Conveying and Injection Molding Hybrid System for Conductive Polymer Composites." Procedia CIRP 81 (2019): 677–82. http://dx.doi.org/10.1016/j.procir.2019.03.175.
Повний текст джерелаRen, Zhigang, Yaodong Li, Zongze Wu, and Shengli Xie. "Deep Learning-Based Predictive Control of Injection Velocity in Injection Molding Machines." Advances in Polymer Technology 2022 (November 15, 2022): 1–14. http://dx.doi.org/10.1155/2022/7662264.
Повний текст джерелаBudiyantoro, Cahyo, Heru S. B. Rochardjo, and Gesang Nugroho. "Overmolding of Hybrid Long and Short Carbon Fiber Polypropylene Composite: Optimizing Processing Parameters." Journal of Manufacturing and Materials Processing 5, no. 4 (December 8, 2021): 132. http://dx.doi.org/10.3390/jmmp5040132.
Повний текст джерелаFernandez, Ellen, Mariya Edeleva, Rudinei Fiorio, Ludwig Cardon, and Dagmar R. D’hooge. "Increasing the Sustainability of the Hybrid Mold Technique through Combined Insert Polymeric Material and Additive Manufacturing Method Design." Sustainability 14, no. 2 (January 13, 2022): 877. http://dx.doi.org/10.3390/su14020877.
Повний текст джерелаTanaka, Kazuto, Akihiro Hirata, and Tsutao Katayama. "Effect of Press Condition on the Mechanical Properties of GFRTP Molded by the Melted Thermoplastic-Resin Transfer Molding." Key Engineering Materials 774 (August 2018): 367–72. http://dx.doi.org/10.4028/www.scientific.net/kem.774.367.
Повний текст джерелаThodsaratpreeyakul, Wiranphat, Putinun Uawongsuwan, Akio Kataoka, Takanori Negoro, and Hiroyuki Hamada. "Mechanical properties and fiber characteristics of glass fiber/carbon fiber reinforced polyethylene terephthalate hybrid composites fabricated by direct fiber feeding injection molding." Journal of Polymer Engineering 38, no. 6 (July 26, 2018): 513–23. http://dx.doi.org/10.1515/polyeng-2017-0193.
Повний текст джерелаLu, Yanjun, Wang Luo, Xiaoyu Wu, Bin Xu, Chunjin Wang, Jiajun Li, and Liejun Li. "Fabrication of Micro-Structured LED Diffusion Plate Using Efficient Micro Injection Molding and Micro-Ground Mold Core." Polymers 12, no. 6 (June 8, 2020): 1307. http://dx.doi.org/10.3390/polym12061307.
Повний текст джерелаFernandez, Angel, and Manuel Muniesa. "Influence of Packing Phase Parameters in the Optimization of Mechanical, Weight Reduction and Dimensional Properties of Microcellular Foaming Injection Molding of Polypropilene." Advanced Materials Research 445 (January 2012): 319–24. http://dx.doi.org/10.4028/www.scientific.net/amr.445.319.
Повний текст джерелаChen, Shia-Chung, Hai-Mei Li, Shyh-Shin Hwang, and Ho-Hsiang Wang. "Passive mold temperature control by a hybrid filming-microcellular injection molding processing." International Communications in Heat and Mass Transfer 35, no. 7 (August 2008): 822–27. http://dx.doi.org/10.1016/j.icheatmasstransfer.2008.03.013.
Повний текст джерелаYu, Jingxian, and Qiyuan Zhang. "Limited Rolling Time Domain-Based Hybrid Tracking Control for Injection Molding Process." IEEE Access 7 (2019): 67446–55. http://dx.doi.org/10.1109/access.2019.2918020.
Повний текст джерелаBakshi, Payal, Asokan Pappu, Ravi Patidar, Manoj Kumar Gupta, and Vijay Kumar Thakur. "Transforming Marble Waste into High-Performance, Water-Resistant, and Thermally Insulative Hybrid Polymer Composites for Environmental Sustainability." Polymers 12, no. 8 (August 9, 2020): 1781. http://dx.doi.org/10.3390/polym12081781.
Повний текст джерелаHummel, Sabine, Katharina Obermeier, Katja Zier, Sandra Krommes, Michael Schemme, and Peter Karlinger. "Analysis of Mechanical Properties Related to Fiber Length of Closed-Loop-Recycled Offcuts of a Thermoplastic Fiber Composites (Organo Sheets)." Materials 15, no. 11 (May 29, 2022): 3872. http://dx.doi.org/10.3390/ma15113872.
Повний текст джерелаAlmeida, Fátima de, Vitor F. C. Sousa, Francisco J. G. Silva, Raúl D. S. G. Campilho, and Luís P. Ferreira. "Development of a Novel Design Strategy for Moving Mechanisms Used in Multi-Material Plastic Injection Molds." Applied Sciences 11, no. 24 (December 12, 2021): 11805. http://dx.doi.org/10.3390/app112411805.
Повний текст джерелаTóth, Csenge, and Norbert Krisztián Kovács. "Development of a Novel Hybrid Manufacturing Technology For Continuous Fiber-Reinforced Thermo-Plastic Composites." Acta Materialia Transylvanica 5, no. 1 (April 1, 2022): 39–44. http://dx.doi.org/10.33924/amt-2022-01-09.
Повний текст джерелаMoritzer, Elmar, and Christopher Budde. "Influence of Material Properties on the Bond Strength of a Hybrid Part Consisting of Composite Sheet and Short-Fiber Thermoplastic." Materials Science Forum 825-826 (July 2015): 409–16. http://dx.doi.org/10.4028/www.scientific.net/msf.825-826.409.
Повний текст джерелаDeringer, Tim, and Dietmar Drummer. "The influence of mold temperature on thermoset in-mold forming." Journal of Polymer Engineering 40, no. 3 (February 25, 2020): 256–66. http://dx.doi.org/10.1515/polyeng-2019-0322.
Повний текст джерелаNISHIMUKAI, Koji, Daiki TANABE, and Kazuaki Daiki. "J0450105 Fabrication of Thermoplastic CFRP Shock Absorber by Hot Pressing-Injection Hybrid Molding." Proceedings of Mechanical Engineering Congress, Japan 2015 (2015): _J0450105——_J0450105—. http://dx.doi.org/10.1299/jsmemecj.2015._j0450105-.
Повний текст джерелаGuo, Gangjian, Joseph C. Chen, and Guan Gong. "Injection molding of polypropylene hybrid composites reinforced with carbon fiber and wood fiber." Polymer Composites 39, no. 9 (March 24, 2017): 3329–35. http://dx.doi.org/10.1002/pc.24350.
Повний текст джерелаChen, Wen Jong, and Jia Ru Lin. "Design of Optimization Parameters with Hybrid Genetic Algorithm Method in Multi-Cavity Injection Molding Process." Advanced Materials Research 463-464 (February 2012): 587–91. http://dx.doi.org/10.4028/www.scientific.net/amr.463-464.587.
Повний текст джерелаMachado, Ricardo, Waldyr Ristow, P. R. Alba, Aloísio Nelmo Klein, Paulo A. P. Wendhausen, and D. Fusão. "Plasma Assisted Debinding and Sintering (PADS) – Metal Injection Molding Application." Materials Science Forum 530-531 (November 2006): 224–29. http://dx.doi.org/10.4028/www.scientific.net/msf.530-531.224.
Повний текст джерелаMehner, Andreas, Ju An Dong, Timo Hoja, Torsten Prenzel, Yildirim Mutlugünes, Ekkard Brinksmeier, Don Lucca, and Fritz Klaiber. "Diamond Machinable Sol-Gel Silica Based Hybrid Coatings for High Precision Optical Molds." Key Engineering Materials 438 (May 2010): 65–72. http://dx.doi.org/10.4028/www.scientific.net/kem.438.65.
Повний текст джерелаHimasekhar, K., J. Lottey, and K. K. Wang. "CAE of Mold Cooling in Injection Molding Using a Three-Dimensional Numerical Simulation." Journal of Engineering for Industry 114, no. 2 (May 1, 1992): 213–21. http://dx.doi.org/10.1115/1.2899774.
Повний текст джерелаMATSUMOTO, Fumiya, Daiki TANABE, and Kazuaki NISHIYABU. "Evaluation method for tensile shear strength of woven CF/PA66 hybrid specimen manufactured by hybrid injection molding." Proceedings of Mechanical Engineering Congress, Japan 2019 (2019): J04410P. http://dx.doi.org/10.1299/jsmemecj.2019.j04410p.
Повний текст джерелаSobhanie, M., and A. I. Isayev. "Viscoelastic Simulation of Flow of Rubber Compounds." Rubber Chemistry and Technology 62, no. 5 (November 1, 1989): 939–56. http://dx.doi.org/10.5254/1.3536285.
Повний текст джерелаLoaldi, Dario, Leonardo Piccolo, Eric Brown, Guido Tosello, Corey Shemelya, and Davide Masato. "Hybrid Process Chain for the Integration of Direct Ink Writing and Polymer Injection Molding." Micromachines 11, no. 5 (May 18, 2020): 509. http://dx.doi.org/10.3390/mi11050509.
Повний текст джерелаHisakura, Yuuki, Keinichi Kitahara, Makoto Sugihara, Akihiko Imajo, and Hiroyuki Hamada. "Mechanical Properties of GF/CF Hybrid ABS Composite by DFFIM." Key Engineering Materials 728 (January 2017): 240–45. http://dx.doi.org/10.4028/www.scientific.net/kem.728.240.
Повний текст джерелаKang, Ji-Heon, Jae-Wook Lee, Jae-Hong Kim, Tae-Min Ahn, and Dae-Cheol Ko. "Design of Center Pillar with Composite Reinforcements Using Hybrid Molding Method." Materials 14, no. 8 (April 20, 2021): 2047. http://dx.doi.org/10.3390/ma14082047.
Повний текст джерела