Добірка наукової літератури з теми "Hybrid Injection Molding"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Hybrid Injection Molding".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Hybrid Injection Molding"
TOMARI, Kiyotaka. "Hybrid Injection Molding Process." Kobunshi 47, no. 9 (1998): 665–68. http://dx.doi.org/10.1295/kobunshi.47.665.
Повний текст джерелаAsanuma, Nobuyuki. "Applying Direct Injection Molding Process and Hybrid Molding System to CFRP Molding." Seikei-Kakou 27, no. 3 (February 20, 2015): 89–93. http://dx.doi.org/10.4325/seikeikakou.27.89.
Повний текст джерелаChen, Wei, Xian Hong Han, Xiong Hui Zhou, and Xue Wei Ge. "Hybrid Optimization Approach for Gas-Assisted Injection Molding Based on Metamodeling and Particle Swarm Algorithm." Advanced Materials Research 97-101 (March 2010): 3353–56. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.3353.
Повний текст джерелаFrick, Achim, and Marcel Spadaro. "Injection Molded Aluminum-Polymer-Composites - Integral Lightweight Structures with Potential." Key Engineering Materials 742 (July 2017): 381–88. http://dx.doi.org/10.4028/www.scientific.net/kem.742.381.
Повний текст джерелаHirsch, Patrick, Marianne John, Daniel Leipold, André Henkel, Sylvia Gipser, Ralf Schlimper, and Matthias Zscheyge. "Numerical Simulation and Experimental Validation of Hybrid Injection Molded Short and Continuous Fiber-Reinforced Thermoplastic Composites." Polymers 13, no. 21 (November 7, 2021): 3846. http://dx.doi.org/10.3390/polym13213846.
Повний текст джерелаLing, Wei. "PID Control of Hybrid Injection Molding Machine Temperature." Advanced Materials Research 753-755 (August 2013): 2607–11. http://dx.doi.org/10.4028/www.scientific.net/amr.753-755.2607.
Повний текст джерелаLiao, Xiao Ping, Ting Ruan, Wei Xia, Jun Yan Ma, and Liu Lin Li. "Multi-Objective Optimization by Gaussian Genetic Algorithm and its Application in Injection Modeling." Advanced Materials Research 399-401 (November 2011): 1672–76. http://dx.doi.org/10.4028/www.scientific.net/amr.399-401.1672.
Повний текст джерелаNishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." Materials Science Forum 534-536 (January 2007): 381–84. http://dx.doi.org/10.4028/www.scientific.net/msf.534-536.381.
Повний текст джерелаTomioka, Masao, Takeshi Ishikawa, Akira Inoue, and Tatsuya Tanaka. "Influence of Molding Conditions in Hybrid Injection Molding on Interfacial Adhesion between Inserted and Injection-molded Materials." Seikei-Kakou 30, no. 4 (March 20, 2018): 170–77. http://dx.doi.org/10.4325/seikeikakou.30.170.
Повний текст джерелаPetrova, Tatiana, and David Kazmer. "Hybrid neural models for pressure control in injection molding." Advances in Polymer Technology 18, no. 1 (1999): 19–31. http://dx.doi.org/10.1002/(sici)1098-2329(199921)18:1<19::aid-adv3>3.0.co;2-u.
Повний текст джерелаДисертації з теми "Hybrid Injection Molding"
Shelesh-Nezhad, Karim. "Developing a hybrid expert system program to aid in the design of plastic injection molding process." Thesis, Queensland University of Technology, 1997. https://eprints.qut.edu.au/36048/7/36048_Digitised_Thesis.pdf.
Повний текст джерелаNugay, Isik Isil. "POLYURETHANES in RIGID and FLEXIBLE ELECTRONICSNOVEL HYBRID PROCESSING TECHNIQUES and REAL-TIME MONITORING OF MATERIAL PROPERTIES." University of Akron / OhioLINK, 2014. http://rave.ohiolink.edu/etdc/view?acc_num=akron1406633847.
Повний текст джерелаRohne, Clemens, Michael Schreiter, Jens Sumpf, Klaus Nendel, and Lothar Kroll. "Hybrid Conveyor Chains – Calculation, Design and Manufacturing." Universitätsbibliothek Chemnitz, 2017. http://nbn-resolving.de/urn:nbn:de:bsz:ch1-qucosa-231781.
Повний текст джерелаIn der folgenden Abhandlung wird die Entwicklung einer Multiflex-Kette in Hybridbauweise erläutert. Mit dieser neuartigen Kettenvariante soll eine Steifigkeits- und Festigkeitssteigerung gegenüber den konventionellen Kunststoffgleitketten erzielt werden. Als Ausgangsbasis für die Entwicklung der hybriden Förderkette dient eine zweiteilig ausgeführte Multiflex-Kette mit der Teilung von 33,5 mm und einer Baubreite von 83 mm. Die hybride Förderkette soll in bestehende Layouts von Kettenförderern integriert werden können. Unter Beachtung konstruktiver, fertigungstechnischer und betrieblicher Aspekte wird die lasttragende Struktur der einzelnen Kettenglieder im Metalldruckgussprozess gefertigt und anschließend mit einem, für Multiflex-Ketten üblichen Kunststoff im Spritzgießprozess ummantelt. Die Evaluierung der Steifigkeits- bzw. Festigkeitssteigerung erfolgt im Rahmen umfangreicher Versuchsreihen
Ghoreishi, Rima, and Fatmehsari Mehdi Ehsani. "Mechanical and Thermal Characterizations of Biobased Thermoset Resins from Soybean Oil Reinforced with Natural Fiber Using Vacuum Injection Moulding Technique." Thesis, Högskolan i Borås, Institutionen Ingenjörshögskolan, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:hb:diva-20223.
Повний текст джерелаVastesson, Alexander. "Thiol-ene and Thiol-ene-epoxy Based Polymers for Biomedical Microdevices." Doctoral thesis, KTH, Mikro- och nanosystemteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-215110.
Повний текст джерелаQC 20171003
Imaddahen, Amine. "Étude expérimentale multi-échelle et modélisation hybride prédictive du comportement, de l'endommagement et de la durée de vie en fatigue d’un matériau composite polypropylène / fibres de verre." Thesis, Paris, HESAM, 2020. http://www.theses.fr/2020HESAE063.
Повний текст джерелаThe main objective of this work, is to provide a numerical tool, capable of predicting the damage and fatigue life of thermoplastic matrix composites materials and structures. To do this, a multi-scale experimental study of the PPGF40 material (polypropylene loaded with 40% by mass of glass fiber) is carried out. A qualitative, but also a quantitative analysis of the various damage mechanisms occurring during mechanical loading was carried out through in-situ three-points SEM bending tests, interrupted fatigue tests and observations of fracture faces in monotonic and cyclic loading. In the light of these tests, we concluded that the decohesion of the fiber-matrix interface, and the propagation of cracks through the interfaces, appears to be, the predominant damage phenomenon leading to the fracture of the material and that, regardless of the orientation of the fibers and the loading mode. The proposed hybrid approach is based on a micromechanical / phenomenological model taking into account the damage at the fiber / matrix interface and the plasticity of the matrix. To do this, a local statistical criterion of damage at the fiber-matrix interface is introduced into a Mori and Tanaka model, and the linearization of the plastic behavior of the matrix is done step by step, using the mean field approach with a secant formulation. The micromechanical model used then, makes it possible to predict the behavior of the material under monotonic loading, and in particular the first stiffness loss during the fatigue. Analysis of the experimental results shows that the latter is directly related to the fatigue life of the material. Thus, a predictive methodology of the fatigue life is proposed and validated for various microstructural configurations. A fatigue failure criterion is proposed according to the number of cycles
Wang, Chih-hao, and 王志豪. "Research on Hybrid Optical Elements by Vibratile Injection Compression Molding." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/77563941492623190496.
Повний текст джерела國立臺灣科技大學
機械工程系
98
This research is to develop Vibratile Injection Compression Molding (V-ICM) and integrate the Varithermo Mold Temperature (VMT) technology for increasing the Groove Filling Ratio (GFR) and reduce aspheric form errors of hybrid optical elements. PMMA and COP 480R have been used to investigate the difference in processing, and to understand the residual stress, chromatic aberration (CA) and the Modulation Transfer Function (MTF) graph for comparison. Groove filling ratio (GFR), aspheric form error and the distribution of residual stress have been studied and discussed. Results have shown that the V-ICM can enhance the GFR effectively. In addition, the fixed mold temperature and different trigger time points affect the GFR significantly under the same aspheric form errors. The GFR can achieve nearly 98.09% and aspheric form error is about 7.26μm with high mold temperature in the COP 480R processing with V-ICM and VMT technology. The results of this study can effectively enhance the accuracy of multi-scale hybrid optical elements. In the future, this technology can apply to produce the high accuracy and also have the aspheric form with different multi-scale sizes, or freeform optical elements.
Lee, Feng-Chi, and 李豐吉. "Research on Multi-Scale Hybrid Optical Elements by Injection Molding." Thesis, 2009. http://ndltd.ncl.edu.tw/handle/60630087523422359384.
Повний текст джерела國立臺灣科技大學
機械工程系
97
This research is to develop and integrate the in-mold micro compression (IMMC) and varithermo mold temperature (VMT) method in injection molding process for investigating the multi-scale hybrid optical elements including the aspheric form error (Rt) and the replication or groove filling ratio (GFR) of Fresnel diffraction structure. The data acquisition system is used to integrate these two processes. In the IMMC method, piezoelectric actuator and pressure sensor are used to test with different percentages of peak filling pressure. The VMT method is to switch on the compression air to achieve quick mold cooling after sensing the packing phase signal from the injection molding machine. It is to investigate the effect of different cooling setting temperature (CST) on the quality of molded parts. The Rt can be achieved as 1.29 μm when the mold temperature is set as 100 ℃ in the traditional injection molding. Then experimental results show that the Rt can be achieved as 3.32 μm and the GFR as 96.95% when the mold temperature is set as 120 ℃, the CST of varithermo mold temperature as 80 ℃, and the IMMC method with trigger point as 50% of peak filling pressure. Further research focuses on the replication of hybrid lens array optical elements with micro structures to increase the optical performances.
Lin, Shian-Ming, та 林先明. "Research on μ-Injection Compression Molding of Hybrid Optical Elements". Thesis, 2008. http://ndltd.ncl.edu.tw/handle/54326041383935224691.
Повний текст джерела國立臺灣科技大學
機械工程系
96
This research conducted a novel micro injection compression molding (μ-ICM) process for fabrication of hybrid optical elements (HOEs). The micro compression motion is triggered by the percentage of peak filling pressure obtained by the data acquisition (DAQ) system. Experiments were implemented with different percentages of peak fill pressure, and the relationship between the trigger time and transfer ratio of the groove (TRG) were investigated. The Moldflow MPI software (Moldflow Co., USA) is used to simulate the filling and packing stages of HOEs. Comparison of short shot is preceded by simulation and experimentation. Results show that (1) the HOEs are fabricated successfully by the μ-ICM with a closed-loop pressure control, (2) the comparison of short shot is similar in simulation and experiment, (3) the TRG has been achieved as 99% when the trigger pressure is 15% of peak filling pressure with mold temperature 90°C and melt temperature 250°C, (4) the comparison of different mold insert materials show that the STAVAX with electroless plated Nickel (ELNi ) has better TRG than that of the oxygen-free copper (OFC) due to higher hardness of ELNi. Further research focuses on the μ-ICM of optical elements with micro structures to increase the optical performances.
Chen, Pi-Kai, and 陳必凱. "Research on Closed-Loop Micro Injection Compression Molding of Hybrid Optical Elements." Thesis, 2010. http://ndltd.ncl.edu.tw/handle/43370630576400291339.
Повний текст джерела國立臺灣科技大學
自動化及控制研究所
98
This research is to develop a novel Closed-Loop micro injection compression molding (CLMICM) process for fabricating the multi-scale hybrid optical elements with Fresnel diffraction structure. The research adopts the LabVIEW and PC-Based control system to construct a controller developing platform. In this Study performance analysis, controller design, simulation, and system application have been completed and tested on this platform. The cavity pressure controller uses a mold-based PI controller for closed-loop control scheme. Experimental results have demonstrated the feasibility of the proposed system. Results show that the HOEs can be fabricated successfully by the CLMICM. The cavity pressure response is similar as show in simulation and experiment. Moreover, the groove filling ratio (GFR) has been achieved as 98.27% by CLMICM with mold temperature 100°C. Further research focuses on the CLMICM for optical elements with micro structures and aspheric surface to increase the optical performances.
Частини книг з теми "Hybrid Injection Molding"
Nishiyabu, Kazuaki, Kenichi Kakishita, and Shigeo Tanaka. "Micro Metal Injection Molding Using Hybrid Micro/Nano Powders." In Progress in Powder Metallurgy, 381–84. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-419-7.381.
Повний текст джерелаJie, Zhu, Luo Hao, Weng Ting, Li Zhi, Zong Wei, and Zeng Keli. "Characterization of Fine Metal Powders Produced by Hybrid by Water–Gas Atomization for Metal Injection Molding." In Frontiers in Materials Processing, Applications, Research and Technology, 391–97. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-4819-7_34.
Повний текст джерелаТези доповідей конференцій з теми "Hybrid Injection Molding"
Wang, T. James. "Numerical Simulation of Injection/Compression Molding." In ASME 1997 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1997. http://dx.doi.org/10.1115/imece1997-0621.
Повний текст джерелаTanaka, K., Y. Fujita, and T. Katayama. "Press and injection hybrid molding of glass fiber reinforced thermoplastics." In MATERIALS CHARACTERISATION 2015. Southampton, UK: WIT Press, 2015. http://dx.doi.org/10.2495/mc150201.
Повний текст джерелаMorii, Tohru, Nobuyuki Jumonji, Tomoko Ohta, Asami Nakai, and Hiroyuki Hamada. "Prediction of Tensile Properties of Glass/Jute Hybrid Injection Moldings." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-10914.
Повний текст джерелаXiaomin, Cheng, and Shen Naiyu. "The Research of Thin-Walled Parts Collaborative Development Based on Injection Molding Simulation." In 2008 Third International Conference on Convergence and Hybrid Information Technology (ICCIT). IEEE, 2008. http://dx.doi.org/10.1109/iccit.2008.204.
Повний текст джерелаYoon, Sung-Hwan, Prabhu Palanisamy, Purushotham Padmanabha, Joey L. Mead, and Carol M. F. Barry. "Comparison of Tooling Materials in Injection Molding of Microscale Features." In ASME 2009 International Mechanical Engineering Congress and Exposition. ASMEDC, 2009. http://dx.doi.org/10.1115/imece2009-13346.
Повний текст джерелаTsuei, Kuang-Yih, and Shu-Fen Kuo. "Washers to Reduce Vibration and Noise From the Injection Molding Process." In ASME 8th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2006. http://dx.doi.org/10.1115/esda2006-95428.
Повний текст джерелаZhou, Yong, Tianhao Yang, and Hao Wu. "Simulation and Implementation of Servo Control System for Electro-hydraulic Hybrid Injection Molding Machine." In 2019 International Conference on Sensing, Diagnostics, Prognostics, and Control (SDPC). IEEE, 2019. http://dx.doi.org/10.1109/sdpc.2019.00073.
Повний текст джерелаSin, Hyeseong, Daehwan Ahn, Youngsam Kwon, and Dongsik Kim. "Hybrid manufacturing of stainless steel and zirconia micro components using laser micromachining and powder injection molding." In 2015 11th Conference on Lasers and Electro-Optics Pacific Rim (CLEO-PR). IEEE, 2015. http://dx.doi.org/10.1109/cleopr.2015.7376420.
Повний текст джерелаYan, Xiaofei, Putinun Uawongsuwan, Masuo Murakami, Akihiko Imajo, Yuqiu Yang, and Hiroyuki Hamada. "Tensile Properties of Glass Fiber/Carbon Fiber Reinforced Polypropylene Hybrid Composites Fabricated by Direct Fiber Feeding Injection Molding Process." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-66270.
Повний текст джерелаLandgrebe, Dirk, Roland Müller, Rico Haase, Peter Scholz, Matthias Riemer, Andre Albert, Raik Grützner, and Frank Schieck. "Efficient Manufacturing Methods for Hybrid Metal-Polymer Components." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65621.
Повний текст джерела