Дисертації з теми "Hip joint"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Hip joint".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Apatsidis, Dimitrios P. "The hip joint capsule : mechanical properties and contribution to joint stability in total hip replacement." Thesis, University of Strathclyde, 2002. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21186.
Повний текст джерелаAslan, Nuri. "A polymeric composite hip joint prosthesis." Thesis, University of Ulster, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.385672.
Повний текст джерелаStroud, Nicholas James. "Advancements of a servohydraulic human hip joint motion simulator for experimental investigation of hip joint impingement/dislocation." Thesis, University of Iowa, 2010. https://ir.uiowa.edu/etd/746.
Повний текст джерелаChen, Shuenn-muh. "Kinematic and passive resistive properties of human shoulder hip and elbow complexes /." The Ohio State University, 1986. http://rave.ohiolink.edu/etdc/view?acc_num=osu1487266691095932.
Повний текст джерелаWalter, William Lindsay School of Biomechanics UNSW. "Severe biomechanical conditions in total hip replacement." Awarded by:University of New South Wales. School of Biomechanics, 2006. http://handle.unsw.edu.au/1959.4/25968.
Повний текст джерелаWatters, Eamon Patrick John. "Wear properties of artificial hip joint materials." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.321968.
Повний текст джерелаSchumacher, Brian. "An analysis of the femoral head/stem taper lock for orthopaedic prostheses." Thesis, Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/18927.
Повний текст джерелаGood, Victoria Diane. "The tribological significance of the joint fluid analog in a hip joint simulator." Thesis, University of Strathclyde, 2001. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21422.
Повний текст джерелаRunser, Alicia M. "Global Joint Registry: Analysis of Revision Hip Arthroplasty Data." Wright State University / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=wright1610382916575377.
Повний текст джерелаWeinrauch, Patrick Connor Lachlan. "Techniques for the Surgical Management of Adult Hip Joint Disorders." Thesis, Griffith University, 2017. http://hdl.handle.net/10072/366442.
Повний текст джерелаThesis (PhD Doctorate)
Doctor of Philosophy by Publication (PhD)
School of Medical Science
Griffith Health
Full Text
Stansfield, Benedict William. "Hip joint forces : hip joint forces of 40 to 60 year old normal and total hip replacement subjects during walking and stair, ramp and camber negotiation." Thesis, University of Strathclyde, 2000. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21141.
Повний текст джерелаSmith, Simon Lawrence. "Design, development and applications of hip joint simulators." Thesis, Durham University, 1999. http://etheses.dur.ac.uk/1132/.
Повний текст джерелаMiles, Brad. "Reducing the risk of peri-prosthetic femoral fracture : prothesis, patient or procedure?" Phd thesis, Faculty of Engineering and Information Technologies, 2012. http://hdl.handle.net/2123/9987.
Повний текст джерелаIWATA, HISASHI, SEIKI IWASADA, KOUICHI KAWAMOTO, TOSHIKI IWASE, and YUKIHARU HASEGAWA. "MACROMOTION OF THE FEMORAL COMPONENT IN ARTIFICIAL HIP JOINT." Nagoya University School of Medicine, 1996. http://hdl.handle.net/2237/16103.
Повний текст джерелаSadeghi-Mehr, Mohsen. "Investigation of rolling element bearings for hip joint prostheses." Thesis, Imperial College London, 1998. http://hdl.handle.net/10044/1/8491.
Повний текст джерелаRamjee, Shatish. "Numerical analysis of lubrication in an artificial hip joint." Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-09152008-133304/.
Повний текст джерелаFitzsimmons, Anna. "Hip joint forces in hip replacement patients and normal subjects during activities of daily living." Thesis, University of Strathclyde, 1995. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21386.
Повний текст джерелаHoang, Hoa. "Calibrated EMG-Informed Neuromusculoskeletal Modelling to Estimate Physiologically Plausible Hip Joint Contact Forces in People with Hip Osteoarthritis." Thesis, Griffith University, 2017. http://hdl.handle.net/10072/371909.
Повний текст джерелаThesis (PhD Doctorate)
Doctor of Philosophy (PhD)
School Allied Health Sciences
Griffith Health
Full Text
Opperman, Tertius. "Tribological evaluation of joint fluid and the development of a synthetic lubricant for use in hip joint simulators." Pretoria : [s.n.], 2004. http://upetd.up.ac.za/thesis/available/etd-07282005-083909.
Повний текст джерелаWillson, John D. "Hip strength and lower extremity mechanics in females with and without patellofemoral pain." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 191 p, 2007. http://proquest.umi.com/pqdweb?did=1397905251&sid=14&Fmt=2&clientId=8331&RQT=309&VName=PQD.
Повний текст джерелаWan, Ka-ming Bettina, and 尹家明. "Validation of the Nottingham hip fracture score in a Hong Kong population." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 2014. http://hdl.handle.net/10722/206951.
Повний текст джерелаpublished_or_final_version
Public Health
Master
Master of Public Health
Philipp, Henry Peter. "Größere Köpfe kompensieren erhöhte HTEP-Luxationsgefahr bei Hochrisikopatienten: Eine Fallserie mit Literaturüberblick." Doctoral thesis, Universitätsbibliothek Leipzig, 2016. http://nbn-resolving.de/urn:nbn:de:bsz:15-qucosa-211040.
Повний текст джерелаTimoney, Patrick Eugene Mark. "The role of vibration arthrometry in the diagnosis of human joint pathology." Thesis, Queen's University Belfast, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.263489.
Повний текст джерелаDwyer, Maureen Kelly. "THE ROLE OF THE HIP ABDUCTOR MUSCLE COMPLEX IN THE FUNCTION OF THE PATHOLOGICAL HIP JOINT." UKnowledge, 2009. http://uknowledge.uky.edu/gradschool_diss/700.
Повний текст джерелаLanglotz, Ulrich. "Computer assisted reconstruction and replacement of the human hip joint /." Bern, 2002. http://www.stub.unibe.ch/html/haupt/datenbanken/diss/bestell.html.
Повний текст джерелаGiven, Laura Elizabeth. "Effect of cam-type femoroacetabular impingement on hip joint kinematics." Thesis, University of British Columbia, 2010. http://hdl.handle.net/2429/27309.
Повний текст джерелаHarun, Muhamad Noor. "Computational wear simulation for metal-on-metal hip joint replacement." Thesis, University of Leeds, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.444062.
Повний текст джерелаLyons, Percie Jewell. "Effects of Hip Osteoarthritis on Lower Extremity Joint Contact Forces." Thesis, Virginia Tech, 2021. http://hdl.handle.net/10919/104968.
Повний текст джерелаMaster of Science
People with osteoarthritis suffer from joint degeneration and pain as well as difficulty performing daily activities, like walking. It is important to understand the forces and loading within individual joints. Musculoskeletal modeling is one way that researchers can estimate these joint contact forces (JCF) without needing a joint replacement implant that can measure these forces. When it comes to modeling simulations, there is a wide variety of results. Therefore, the first purpose of this study was to develop and validate a musculoskeletal model in which JCFs were calculated at the hip, knee, and ankle in 10 participants with hip osteoarthritis and 10 healthy adults. Validation of the model was completed through a comparison between computed results and published data of similar participant samples during level walking. The computed results were similar to the overall trends of published JCF results, however the numerical values themselves were larger than those in published studies. The computed JCFs were then used in the second portion of this study to determine how the two groups and limbs differ during level walking. There was a significant difference in the knee and ankle JCF during the first half of the stance phase and in all joints during the second half of stance when comparing the two groups. The hip osteoarthritis participants also experience an earlier peak hip JCF during the second half of stance phase on their affected limb. This finding suggests that hip osteoarthritis participants may change the way they take a step as a strategy to decrease or limit pain and loading on the affected limb. Knowledge of potential JCF differences, such as timing of the peaks in either portion of the stance phase, could provide useful insight to clinicians and therapists to make decisions on how to proceed with treatment or rehabilitation programs.
Modenese, Luca. "Biomechanics, musculoskeletal modelling, hip joint loads prediction, muscle force estimation." Thesis, Imperial College London, 2012. http://hdl.handle.net/10044/1/39476.
Повний текст джерелаSun, Dan. "Abrasion-corrosion of cast CoCrMo in simulated hip joint environments." Thesis, University of Southampton, 2009. https://eprints.soton.ac.uk/67337/.
Повний текст джерелаAhzi, Zhor. "Durability improvement of total hip joint prosthesis by diamond coating." Strasbourg, 2011. http://www.theses.fr/2011STRA6197.
Повний текст джерелаOrthopaedic implants have improved the quality of life for millions of people over the last quarter of a cenlllly. The chnical objective is 10 rclieve pain and increase case ofmovement in the joint. In this work. We focus on hipjoint replacements. The biomaterial used is Titanium alloys (Ti6AI4 V). Coating Ti6AI4 V with diamond makes it one of the promising strategies 10 improve the alloy wear behavior, The main goal of this study is to obtain such coating with high qualily. Unstressed, conti nuous and well-adhered diamond film on Ti6Al4 V using a new process named time modulated CVD (Tr. . 1CVD). This technique is able to produce ultra-hard, smoolh. And good quality diamond films. Nonetheless, satisfactory adherence of diamond coating tilms to Ti6AI4V will be attainable by the use of an interlayer. In order 10 compensale the large interfacial thermal expansion mismatch between the cOining and substrate material. For thi s, we have used OLC (diamond like carbon) as an inlcrlayer material between diamond coatings and Ti6AI4 V substrate. The residual stresses in the diamond lilm were characterized for the cases with and withou! the OLC intcrlayer using scanning cleClron microscopy (SEM), Raman speclroscopy and X-ray diffraction. Lower values of the rcsidual stresses \Vere obtained for the case \Vith DLC interlayer. Finally, a numcri cal simulation \Vas conduclcd to estimate the thermal residual stresses that dcvelop in the diamond film and in the substratc. Ln this. We simulatcd the cooling process from the deposition temperalurc of diamond (600 10 900 oC) 10 room tcmpcralurc The obtaincd results show that the predicted rcsidunl Stresses are of the sarne order as those measurcd experimcntally
Ranuša, Matúš. "VOLUMETRIC WEAR ANALYSIS OF HIP JOINT IMPLANTS BY OPTICAL METHODS." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2019. http://www.nusl.cz/ntk/nusl-391868.
Повний текст джерелаSelvey, David M. "Traumatic posterior fracture-dislocation of the hip joint in adults." Master's thesis, University of Cape Town, 2000. http://hdl.handle.net/11427/26636.
Повний текст джерелаWang, Allan W. "Femoral bone remodelling following cemented hip arthroplasty in a sheep model /." Title page, contents and abstract only, 1998. http://web4.library.adelaide.edu.au/theses/09PH/09phw2462.pdf.
Повний текст джерелаAl-Haifi, Nawaf. "Design and manufacture of a universal mechanical human joint simulator." Thesis, Brunel University, 2011. http://bura.brunel.ac.uk/handle/2438/9603.
Повний текст джерелаWoodley, Stephanie Jane, and n/a. "Lateral hip pain : an anatomical and clinical study." University of Otago. Department of Anatomy & Structural Biology, 2006. http://adt.otago.ac.nz./public/adt-NZDU20061206.162321.
Повний текст джерелаBicknell, Louise Susan, and n/a. "Genetic contributors to congenital joint dislocation." University of Otago. Dunedin School of Medicine, 2007. http://adt.otago.ac.nz./public/adt-NZDU20080211.151359.
Повний текст джерелаParry, Jenna Marie. "Canine Hip Dysplasia: a Comprehensive Analysis." Kent State University Honors College / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ksuhonors1544365851905296.
Повний текст джерелаDierks, Tracy Allan. "Kinematics and joint coupling in runners with patellofemoral pain during a prolonged run." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file 8.83 Mb., 176 p, 2006. http://gateway.proquest.com/openurl?url_ver=Z39.88-2004&res_dat=xri:pqdiss&rft_val_fmt=info:ofi/fmt:kev:mtx:dissertation&rft_dat=xri:pqdiss:3200532.
Повний текст джерелаNg, Kwan-Ching Geoffrey. "The Effects of Cam Femoroacetabular Impingement on Mechanical Hip Joint Loading." Thesis, Université d'Ottawa / University of Ottawa, 2017. http://hdl.handle.net/10393/35918.
Повний текст джерелаUpadhyaya, Swati. "Decreasing Error in Functional Hip Joint Center Calculation using Ultrasound Imaging." Thèse, Université d'Ottawa / University of Ottawa, 2013. http://hdl.handle.net/10393/26125.
Повний текст джерелаRufaqua, Risha. "THE BIOCHEMICAL PROCESS OF LUBRICANT FILM FORMATION INSIDE HIP JOINT REPLACEMENT." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2021. http://www.nusl.cz/ntk/nusl-446792.
Повний текст джерелаTownsend, Kevin Charles. "Validation and applications of discrete element analysis in the hip joint." Thesis, University of Iowa, 2015. https://ir.uiowa.edu/etd/1777.
Повний текст джерелаKlippel, Nathan John. "The effects of hip angle manipulation on submaximal oxygen consumption in collegiate cyclists." Thesis, Montana State University, 2004. http://etd.lib.montana.edu/etd/2004/klippel/KlippelN1204.pdf.
Повний текст джерелаMcGee, Margaret Ann. "Health care outcomes evaluation of total hip arthroplasty patients : comparison of patient and doctor derived data /." Title page, contents and abstract only, 1999. http://web4.library.adelaide.edu.au/theses/09MPM/09mpmm145.pdf.
Повний текст джерелаGoto, Shiho. "The effect of Patellofemoral pain syndrome on the hip and knee neuromuscular control on dynamic postural control task /." Connect to full text in OhioLINK ETD Center, 2009. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=toledo1254078175.
Повний текст джерелаTypescript. "Submitted as partial fulfillment of the requirements for The Master of Science degree in Exercise Science." "A thesis entitled"--at head of title. Bibliography: leaves 57-61.
Thompson, Mark S. "The design of a novel hip resurfacing prosthesis." Thesis, Queen Mary, University of London, 2001. http://qmro.qmul.ac.uk/xmlui/handle/123456789/28944.
Повний текст джерелаDavidson, James A. "Evaluation of in-vivo frictional heating from articulation in the reconstructed hip joint." Thesis, University of Strathclyde, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.258356.
Повний текст джерелаWu, Jun Jie. "The integrity of moulded ultra-high molecular weight polyethylene for joint replacement prostheses." Thesis, University of Oxford, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.325574.
Повний текст джерелаRubin, Pascal. "Hip joint replacement biomechanics and morphometric aspects of the bone-implant system /." Lausanne : EPFL, 1992. http://library.epfl.ch/theses/?nr=1066.
Повний текст джерела