Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Higher educational technical establishments.
Книги з теми "Higher educational technical establishments"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 книг для дослідження на тему "Higher educational technical establishments".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте книги для різних дисциплін та оформлюйте правильно вашу бібліографію.
1
National Conference on Educational Technology for Higher Technical Education and Training (1991 Maulana Azad College of Technology, Bhopal). Educational technology for higher technical education and training: Proceedings of the National Conference on Educational Technology for Higher Technical Education and Training. Edited by Tokhi V. K and Maulana Azad College of Technology. New Delhi: Tata McGraw-Hill Pub. Co., 1991.
Знайти повний текст джерела
2
Fox, Jim. The suitability of the TeX text formatter for thesis preparation by technical and non-technical degree candidates. [Seattle]: University of Washington, 1987.
Знайти повний текст джерела
3
United States. Congress. House. Committee on Education and the Workforce. Higher Education Technical Amendments of 2000: Report together with additional and dissenting views (to accompany H.R. 4504) (including cost estimate of the Congressional Budget Office). [Washington D.C: U.S. G.P.O., 2000.
Знайти повний текст джерела
4
Long, Michael. Participation in education and training: 1980-1994. Camberwell, Vic: Australian Council for Educational Research, 1999.
Знайти повний текст джерела
5
Dively, Dwight. Evaluation of the Washington Educational Telecommunications System. Seattle, Wash: The Board, 1985.
Знайти повний текст джерела
6
Dively, Dwight. Evaluation of the Washington Educational Telecommunications System: Report. Seattle, Wash. (2101 Fourth Avenue, Suite 250, Seattle, WA 98121): The Board, 1985.
Знайти повний текст джерела
7
Media Kyōiku Kaihatsu Sentā (Japan). Kokusai Shinpojūmu. Kōtō kyōiku ni okeru e-rāningu no shitsu hoshō: Media Kyōiku Kaihatsu Sentā Kokusai Shinpojūmu 2005 hōkokusho. Chiba-shi: Media Kyōiku Kaihatsu Sentā, 2006.
Знайти повний текст джерела
8
Luk'yanov, Anatoliy. Technical mechanics. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1078230.
Повний текст джерелаАнотація:
The textbook outlines the theoretical foundations and methods of calculations for the strength, rigidity and stability of structural elements of railway transport. Concepts, definitions and background information are given to the extent necessary to prepare students for work on course assignments. Along with the classical methods of strength assessment, the basic concepts of fracture mechanics are given. It is characterized by a thorough presentation of theoretical material and a detailed solution of examples.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
It is intended for full-time and part-time students receiving education in specialties related to railway transport.
9
Kanke, Viktor. Philosophy for technical specialties. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/967358.
Повний текст джерелаАнотація:
The textbook is a sequential course in philosophy. The questions of the philosophy of science and the history of philosophy, ontology, epistemology, ethics and aesthetics are presented. The course is based on the achievements of analytical philosophy, phenomenology, hermeneutics, post-structuralism and other major philosophical trends of our time. The theory of conceptual transduction is used. Special attention is paid to the connection of philosophy with the technical sciences. The course is carefully verified in didactic terms. Each paragraph ends with conclusions. The textbook includes questions and tasks, tests, references, and recommendations to students. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students of higher educational institutions, especially future technical specialists. It is of interest to a wide range of readers.
10
Gagarina, Larisa, and Filipp Zolotuhin. Technical means of informatization. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1083293.
Повний текст джерелаАнотація:
The systematization of the main structural elements of computers and computer equipment is given, the principles of their operation and the features of their functioning are described. The methods of modernization and debugging are considered. The issues of compatibility, configuration and rational use of equipment are analyzed.
Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation.
For students, postgraduates, researchers, teachers of higher and secondary vocational educational institutions, as well as for everyone interested in the device of a personal computer.
11
Man'kovskaya, Zoya. English language for technical colleges. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1033835.
Повний текст джерелаАнотація:
The textbook is designed to develop students ' skills of analytical, viewing and search reading of General scientific texts, retelling texts based on reference signals, as well as to form grammatical and lexical competencies, the ability to participate in a dialogue on the topic studied, extract information to discuss issues related to the history and current state of physics, biology, computer science, innovation and other areas of knowledge necessary for a modern specialist. It includes a basic course, a grammar workshop, lesson tests, and final tests. Current scientific and technical problems that are widely discussed in the world information space are revealed, which allows the student to maintain a dialogue on current topics of modern science and technology.
Meets the requirements of the Federal state educational standards of higher education of the latest generation.
For first-and second-year students of technical universities of any orientation.
12
Sidorenko, Oleg, and Ekaterina Zhukova. Technical Microbiology of animal products. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1071400.
Повний текст джерелаАнотація:
The textbook examines the role of microorganisms in shaping the quality of animal products, describes the microorganisms that affect the quality of food and processes caused by technically and technologically important microflora. The basic principles of microbiological control of milk and meat processing products production are described. The second edition focuses on the quality and safety of food products of animal origin. The material has been reworked and supplemented with the results of recent research, which can be used in the training program for microbiologists in food technology. Meets the requirements of Federal state educational standards of higher education of the latest generation. For students studying in biological specialties, agricultural technologists in the profile "Technology of production, storage and processing of animal products" and in the areas of training 35.03.07 "Technology of production and processing of agricultural products", 19.03.03, 19.04.03 "food of animal origin".
13
Education in Nigeria: From the beginning to the future. Ikeja, Lagos State, Nigeria: Foremost Educational Services Ltd., 2012.
Знайти повний текст джерела
14
Eroshenko, Gennadiy, Nadezhda Kondrat'eva, and Sergey Bakirov. Fundamentals of technical operation of electrical and electromechanical equipment. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1058537.
Повний текст джерелаАнотація:
The textbook summarizes the main provisions of the operation of electrical equipment in agriculture. At the same time, along with the generally accepted provisions for the operation of electrical equipment, the electrical equipment used by agricultural enterprises, as well as the theoretical foundations of the operation of electrical equipment, the technology of major repairs of electrical equipment and the design of the energy service of an agricultural enterprise are considered in more detail.
Examples are given and the solution of problems on the topics outlined in the textbook is proposed.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students of higher education organizations studying in the field of training 35.03.06 "Agroengineering", as well as anyone interested in the problems of operation of electrical equipment in agriculture.
15
Kuznecova, Irina, and Mihail Prohorov. Educational research project in physics based on open data. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1242226.
Повний текст джерелаАнотація:
One of the forms of teaching physics in high schools with a natural science specialization and in the junior courses of universities can be an educational research project. The use of modern open scientific data makes it possible to make the project interesting, modern, relevant and multidisciplinary. The implementation of such a project allows the student to understand some areas of modern scientific research and the relationship between various natural sciences. Direct comparison of the project results with published fundamental research and discussion of the differences obtained are possible. As the first example of a training project, the determination of the frequency of asteroids and large meteorites (of the Tunguska and Chelyabinsk class) falling to Earth by counting craters on the surface of the Moon and Mercury is considered.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students of higher educational institutions studying in natural science specialties: physics, astronomy, geography, geology, soil science, biology, etc—, and students of engineering and technical specialties of full-time and distance learning.
16
Kravchenko, Igor. Technological processes in the technical service of machinery and equipment. ru: INFRA-M Academic Publishing LLC., 2017. http://dx.doi.org/10.12737/25226.
Повний текст джерелаАнотація:
Described in the textbook theoretical bases, organizational aspects of technical service of machinery and equipment, and the use of resource-saving technologies of recovery and strengthening. Methods are described for the deposition of coatings of various functional purposes, equipment and materials. Summarizes the results of theoretical and experimental studies of domestic and foreign researchers. Reviewed test methods and properties of the coatings, and given the scope of their effective use at the enterprises of technical service.
Meets the requirements of Federal state educational standard of higher education of the last generation.
Addressed to students of undergraduate and graduate students by specialty "Agroengineering" and technical workers agricultural, engineering, power, metallurgical and other industries.
17
Marwick, KPMG Peat. South Carolina education performance audit final report. [Columbia, S.C: South Carolina Performance Audit Steering Committee, Office of the Lieutenant Governor, 1998.
Знайти повний текст джерела
18
Xian dai xing jing yu zhong de Zhongguo jiao yu chuan tong. Beijing: Hua ling chu ban she, 2006.
Знайти повний текст джерела
19
Panteleev, Andrey. Speech portrait of the hero of Mikhail Zoshchenko's stories. ru: Publishing Center RIOR, 2021. http://dx.doi.org/10.29039/02081-4.
Повний текст джерелаАнотація:
This monograph is dedicated to the study of functioning of multilevel language means that contribute to creating a speech portrait of a “little man’”, who plays a crucial role in M.M. Zoschenko’s short stories.
Specifics of a speech portrait of the satirical novels’ hero can be observed on all the language levels – from phonetics to syntax. The character’s speech is the quintessence of the most vivid and characteristic language means typical of the early Soviet epoch’s representatives.
The book is intended for students of philological departments, masters, postgraduates, teachers of higher educational establishments and for all those interested in the Russian language.
20
Panteleev, Andrey, and Anastasija Inos. The Language of Advertising: Graphic, Grammar and Pragmatic Aspects. ru: Publishing Center RIOR, 2021. http://dx.doi.org/10.29039/02043-2.
Повний текст джерелаАнотація:
This monograph deals with the problem of functioning peculiarities of graphic expressive means and grammar means in the language of modern Russian advertising. This research work treats the advertising discourse as a composite indirect speech act. Active use of adverbial modifiers of manner — deverbatives, elliptical and indefinite personal one-member sentences is characteristic of modern advertising texts. A most distinguishing feature of a modern advertising text is a mixture of Cyrillic and Latin fonts that contributes to the manifestation of an expressive potential of the application.
The monograph is aimed at students of Philology, students major in Management and Marketing, masters, postgraduates, staff of higher educational establishments and all those who are interested in the Russian language.
21
Seslavin, Andrey. Theory of automatic control. Linear, continuous systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1014654.
Повний текст джерелаАнотація:
The textbook presents the basics of the classical theory of automatic control, based on mathematical models of real systems, given in the form of systems of linear differential equations with constant coefficients. Methods based on Laplace and Fourier transforms, stability, controllability, and observability theory, as well as directed graph theory and linear algebra are used. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students of higher educational institutions studying in the areas of training and specialties 15.00.00 "Mechanical Engineering", 27.00.00 "Management in technical systems".
22
Polovinkin, Evgeniy. Theory of functions of a complex variable. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1845987.
Повний текст джерелаАнотація:
The textbook outlines the basics of the theory of functions of a complex variable. The geometric principles of analytic (regular) functions, on the basis of which the geometric theory of conformal maps is constructed, are also considered. Some applied aspects of the functions of a complex variable are given.
Recommended by the Educational and Methodological Council of Higher Educational Institutions of the Russian Federation for Education in the field of applied mathematics and physics as a textbook for students of higher educational institutions studying in the field of Applied Mathematics and Physics and related fields and specialties.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students and teachers of technical and physical-mathematical universities.
23
Ishkov, Aleksandr, Mihail Vikulov, and Yuriy Bochkarev. Operation of mining and transport vehicles in the quarries of the North. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1077325.
Повний текст джерелаАнотація:
The textbook discusses the features of the operation of mining and transport machines in open-pit mining in a cold climate zone, highlights previously unexplored problems of operation of this type of equipment, and describes methods for determining the operational reliability of equipment.
The proposed methods of operation are based on the analysis of a significant amount of statistical material on failures of equipment operating at large mining enterprises of the Republic of Sakha (Yakutia). The influence of low temperatures on the reliability indicators and technical and economic results of the operation of mining and transport machines was determined quantitatively and qualitatively.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
It is intended for students of higher educational institutions studying in the specialty 21.05.04 "Mining", it can also be useful for graduate students, researchers and practitioners specializing in the technical operation of mining and transport machines.
24
Ivshin, Valeriy, and Marat Peruhin. Modern automation in process control systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1216659.
Повний текст джерелаАнотація:
The textbook describes the basics of the theory, schemes, designs and technical characteristics of intelligent measuring instruments. The principles of operation of control and measuring devices, automatic regulators and control devices are considered. Numerous examples of automation schemes are given.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students of technological universities.
25
Dorogova, Ekaterina, and Larisa Gagarina. Basics of C programming. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1035562.
Повний текст джерелаАнотація:
The textbook is an initial course of programming in the C language. The basics of programming, techniques and methods in the style of modular programming are considered. It can be used as a guide to the C language, contains numerous examples tested on a computer. The laboratory workshop will help readers practically master the programming techniques and technical capabilities of classical C, described in this manual. Meets the requirements of the federal state educational standards of higher education of the latest generation. It is recommended for students studying the disciplines "Fundamentals of Programming", "High-level languages", "Computer Science", as well as for teachers of these courses in higher educational institutions.
26
Gagarina, Larisa, Grigoriy Kuznecov, Evgeniy Portnov, and Anna Doronina. Introduction to information and communication technologies. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1189946.
Повний текст джерелаАнотація:
The textbook examines the main milestones in the history of the development of information technologies, computing and computer technology abroad and in Russia. Special attention is paid to the methodology of scientific research in the field of infocommunications. The current sections of the development of telecommunications technologies in the field of multimedia networks and network operating systems are presented. In order to develop practical skills, a laboratory workshop is given.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For senior students of technical specialties, postgraduates, researchers, teachers of higher educational institutions, students of advanced training institutes.
27
Chursin, Vyacheslav, and Vladislav Haustov. Modern technological equipment for leather production. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1039915.
Повний текст джерелаАнотація:
The tutorial shows the design, basic and kinematic diagrams of technological equipment used in the leather industry. Comparative technical characteristics of modern machines and units produced by various companies are presented. Defects that occur during improper operation or malfunction of individual components of technological equipment are considered. Meets the requirements of the Federal state educational standards of higher education of the latest generation. For undergraduate and graduate students of the 29.03.01 and 29.04.01 "technology of light industry products", studying the disciplines "Design, technical re-equipment and reconstruction of light industry enterprises", "fundamentals of machine science in the production of leather and fur", "Modern technological equipment for leather and fur production".
28
Bolarev, Boris. Standardization, Metrology, conformity assessment. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1047211.
Повний текст джерелаАнотація:
Study guide corresponds to the program discipline "Standardization, Metrology, confirmation of conformity" and contains the material for all learning units. The emphasis is on contemporary and topical issues of technical regulation and metrological support. Educational materials are supported by numerous examples.
Meets the requirements of Federal state educational standards of higher education of the last generation.
Designed for students in a direction "trading business", as well as for specialists in food technology, may be used by the specialists of the technical regulation, traders, marketers, merchandisers, experts of bodies of Rospotrebnadzor specialists of certification bodies and testing laboratories, centers of standardization and Metrology, the employees of the Customs Union, as well as economists and managers of enterprises, organizations, etc. Recommended for continuing training of employees in trade, food technology senior and middle managers.
29
Fedotova, Elena. Computer science. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1200564.
Повний текст джерелаАнотація:
The basic concepts in the field of computer science are given, the main categories of computer hardware and software, the principles of building the architecture of computer systems are described. The structural organization of data and the basics of algorithmization, types of software, classification of information technologies and systems, modern document management and office management automation systems, the basics of building artificial intelligence systems, geoinformation systems, virtual reality systems, as well as the basics of information security are considered.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
It is intended for students of higher technical educational institutions studying the discipline "Computer Science", for teachers and specialists working in this field, as well as for those who study this subject area independently.
30
Bartashevich, Aleksandr, Vladimir Onegin, Sergey Trofimov, and Sergey Gayduk. Design furniture. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1025973.
Повний текст джерелаАнотація:
Reviewed all types of furniture and the basic requirements to it, the history of its development, structural and style features modern furniture, basics of design engineering design. A General characteristic properties of production materials and normative-reference data necessary for the development of interiors and furniture. In detail the questions of automation of designing of furniture. Considered furniture in the interior and analyzed all aspects of engineering products for various purposes for premises of residential and public buildings.
For students of higher educational institutions trained on specialities "Technology of logging and wood processing industries" and "Design". Will be useful to students of colleges, higher and secondary vocational and technical schools woodworking profile. Can serve as a reference book for architects, designers, and all production workers in the furniture industry.
31
Bolarev, Boris. Standardization, Metrology, conformity assessment. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1078037.
Повний текст джерелаАнотація:
The textbook reveals the problems of technical regulation, standardization and metrological support, and considers their use in practice. For the first time, the methodology of metrological support of a commercial enterprise is proposed, and the possibilities of organizing activities in a commercial object are determined. It meets the requirements of the Federal state educational standards of higher education of the latest generation and the approximate work programs of the disciplines "Standardization, Metrology, conformity assessment" and"Metrology, standardization, certification". For students of higher and secondary professional educational institutions studying in the direction of "trade" (bachelor) of the subject "commodity science", specialization "Commerce", "trade logistics", as well as for bachelors of food technology studying the discipline "Metrology, standardization, certification", for undergraduates, it can be used in the system of professional development of trade and public catering workers of the highest, middle level, as well as for a wide range of entrepreneurs and specialists.
32
Lukanin, Aleksandr. Environmental Engineering: Processes and gas emissions purification devices. ru: INFRA-M Academic Publishing LLC., 2017. http://dx.doi.org/10.12737/24376.
Повний текст джерелаАнотація:
The tutorial adequately considered the currently existing methods of protection of the air basin from industrial waste gases of chemical, petrochemical, microbiological, pharmaceutical and related industries.
The material is based on a thorough analysis of the treatment methods commonly used, the most dangerous substances that enter the Earth´s atmosphere with the exhaust gases of large enterprises, also provides guidance on the use of gas-cleaning equipment
emissions in the industry.
Compliant with the Federal state educational standard of the latest generation of higher education.
The book is intended for students of technical colleges enrolled
in areas of training "Technosphere Safety" and "Environmental Engineering" (training profiles: "Environmental Engineering localities", "Engineering protection of the environment of industrial enterprises" and "Protection of the environment and resources"), as well as for engineering technical staff, graduate students and professors.
33
Maznev, Aleksandr, and Oleg Shatnev. Electric apparatus and circuits of rolling stock. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1014641.
Повний текст джерелаАнотація:
Provides information about technical data and design of electrical apparatus of control, monitoring and protection of traction motors of electric rolling stock (EPS), the principles of speed control of locomotives and trains with contactor-resistor and semiconductor converters based on modern element base, a circuit diagram of various types of EPS with manifold and induction motors in modes of traction and braking.
For students of institutions of secondary professional education. It may be useful to students of higher educational institutions, courses of improvement of qualification, the railway workers related to the maintenance and repair of rolling stock.
34
Evstaf'ev, Andrey, Aleksandr Maznev, Dmitriy Pegov, Anton Sychugov, and Vitaliy Vasil'ev. Structures and electrical equipment for high-speed ground transport. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1012744.
Повний текст джерелаАнотація:
The issues of the history of the development of high-speed transport, the principles of operation and the device of mechanical and electrical equipment, the features of maintenance and operation of modern high-speed trains are considered.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
It is intended for students of railway transport universities studying in the specialty "Rolling Stock of railways" and the direction "Electric power and electrical Engineering", and can also be useful for engineering and technical workers associated with the operation and maintenance of high-speed trains.
35
Serov, Viktor. Planning of production and economic activities of construction organizations. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1093074.
Повний текст джерелаАнотація:
The textbook discusses the subject, methodology and methods of intra-company planning in the management system of production and economic activities of construction and installation organizations. The role, functions, subject, goals, tasks and principles of intra-company business planning, methods of planning the production program and the sale of construction products, labor and wages, material and technical support for the construction of facilities, construction production costs and the cost of construction products, economic results of production and economic activity, taking into account possible risks, are described. The issues of the organization of intra-company planning, budgeting and economic evaluation of the plans of production and economic activity of construction organizations are considered.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students of higher educational institutions (bachelor's degree) studying in the areas of training 38.03.01 " Economics "(profile" Economics of enterprises and organizations") and 38.03.02" Management "(profile" Production management"), as well as for practical workers of construction and installation organizations.
36
Shevcov, Vyacheslav. Auxiliary historical disciplines: historical Metrology of Russia. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1048877.
Повний текст джерелаАнотація:
The textbook sets out the basics of historical Metrology, presents the historiography of the discipline, and describes its sources, methods, and research approaches. The features of the formation and development of the main Russian measures and their application are considered in the General context of the economic and cultural history of the Russian state and society, the development of scientific and technical knowledge. The appendices contain the program of lectures on historical Metrology, control questions on the course, topics of possible abstracts, a list of sources, textbooks and literature, the main Russian dometric measures of length, area, volume and weight. For students of historical faculties of higher educational institutions.
37
Gadzhiev, Nazirhan, Magomed Gazimagomedov, Andrey Doronin, Natal'ya Ivlicheva, Sergey Konovalenko, Sergey Lebedev, Nikolay Pilyugin, et al. Economic security. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1048684.
Повний текст джерелаАнотація:
The textbook contains 15 topics that reveal the specifics of the discipline Economic security". The systems of quantitative and qualitative indicators for assessing economic security are considered; the methodological principles of assessing financial and monetary policy as a sphere of economic security are studied; the conceptual foundations of the regional economic security program are formed; the theoretical foundations of economic security of enterprises are considered. The main problems of economic security are described in the light of national security issues. Security aspects such as the role of the financial system, foreign economic aspects, social security, and the impact of scientific and technical security on economic security are considered. Special attention is paid to the role of law enforcement agencies in ensuring economic security. Methods of ensuring economic security are described that allow combining the analysis of theoretical positions with real practice and providing a higher level of material assimilation by cadets and students. Meets the requirements of the Federal state educational standard of higher education of the latest generation in the specialty 38.05.01 "Economic security (specialty level)".
38
Lebedev, Vladimir. Technology of repair works of buildings and their engineering systems. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/943589.
Повний текст джерелаАнотація:
The textbook describes the modern technology of repair and construction production, based on the use of technical means, effective materials, products and structures, scientific organization of labor; highlights the issues of improving efficiency and quality, safety and labor protection in the production of repair and construction works. The main stages of repair and construction work are analyzed in detail: disassembly of buildings and structures, repair and strengthening of foundations, foundations, walls and ceilings, technology for repairing floors, windows, doors, etc.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For master's students studying in the field of training "Construction", as well as for graduate students and university teachers.
39
Dmitrieva, Ol'ga. Accounting, analysis and audit of operations with securities. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1048787.
Повний текст джерелаАнотація:
The textbook describes the procedure of maintenance of accounting and tax accounting transactions with underlying securities (shares, bonds, bills of exchange) to organizations that are not professional participants of the securities market. Describes the methodology and fundamental analysis of the stock and methods used to estimate their fair value. It considers the basic tools of technical analysis of the securities market. Disclosed method of analysis of debt securities. The method of audit of operations with securities.
Meets the requirements of Federal state educational standards of higher education of the last generation.
For students studying in field of study 38.03.01 "Economics", practitioners in the field of accounting and analysis, as well as individuals interested in the analysis of debt and equity financial tools to create a personal investment portfolio.
40
Vlasov, Vladimir, Veniamin Bogumil, and Ali Baytulaev. Digital infrastructure and telematics systems for monitoring the maintenance of roads. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1014643.
Повний текст джерелаАнотація:
The textbook gives the concept of digital infrastructure, shows its role as the technological basis of modern telematics systems for monitoring the maintenance of roads. The issues of creating and using elements of digital infrastructure in the road sector, as well as technological processes of automated control of maintenance of roads, streets, and highways are considered. The requirements for the main functions and characteristics of the telematics equipment of road vehicles and mechanisms are given.
The material of the manual is based on the results of theoretical research and practical work on the creation and implementation of automated control systems for the maintenance of roads.
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For students studying in technical areas of training and specialties.
41
SetkovSerbin, Evgeniy. Building structures. Calculation and design. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1030129.
Повний текст джерелаАнотація:
The textbook outlines the basics of designing and calculating the simplest and most widely used load-bearing structures in construction practice. Meets the requirements of the federal state educational standards of secondary vocational education of the latest generation. It is intended for students and teachers of construction colleges and technical schools, as well as other secondary vocational educational institutions that train specialists in construction specialties, primarily in the specialty 08.02.01 "Construction and operation of buildings and structures" with all its specializations of the basic level. It may be of interest to students of higher education, where the discipline "Building structures" is included in the curriculum, but is not a profile. It can be useful for construction technicians engaged in production activities or design work in the field of new construction or reconstruction in the housing and communal complex, especially in small businesses.
42
Grigor'ev, Anatoliy, Evgeniy Isaev, and Pavel Tarasov. Transfer, storage and processing of large volumes of scientific data. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1073525.
Повний текст джерелаАнотація:
The textbook examines large scientific projects and the amount of data generated by them, and provides an overview of scientific computer networks that allow high-speed transmission of large amounts of data for these projects. The article considers the computing systems offered by the leading manufacturers of computer equipment for processing large amounts of data and providing both the possibilities of storing large amounts of data, including distributed data, and the means of analytics and parallel data processing in real time. Special attention is paid to the security of the transmitted scientific information. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students of technical specialties of bachelor's degree, master's degree, specialty, studying in the areas of "Applied Mathematics and Computer Science", "Business Computer Science" and "Computer Science and Computer Engineering".
43
SAVEL'EVA, Ekaterina. Economy and real estate management. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/945341.
Повний текст джерелаАнотація:
The textbook examines the legal and financial aspects of the economy and real estate management, market analysis, real estate, investing (including project financing) and mortgage lending; the essence of development; principles and approaches to effective management of modern real estate, and also questions of technical exploitation and safety of buildings; current issues of taxation of real estate; methods of valuation of real estate.
Meets the requirements of Federal state educational standards of higher education of the last generation.
Designed for undergraduate students enrolled in fields of study 38.03.01 "Economics" (profile "Economics and management of real estate and investments", "Economy and property management") and 38.03.02 "Management" (specialization "Management of real estate"), as well as for students of other specialties, post-graduate students, teachers, beginners appraisers, analysts, specialists in consulting and a wide range of readers interested in the status and development prospects of the real estate market.
44
Andreychikov, Aleksandr, and Ol'ga Andreychikova. Intelligent information systems and artificial intelligence methods. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1009595.
Повний текст джерелаАнотація:
The textbook discusses the methods of artificial intelligence and their application to solve problems from various subject areas. Methods of acquisition, representation and processing of knowledge in intelligent systems, as well as technologies for designing and implementing intelligent systems, are described. Special attention is paid to the application of intelligent systems for the selection of collective solutions, the design of complex systems( objects), the analysis and forecasting of the enterprise. Meets the requirements of the federal state educational standards of higher education of the latest generation. For students enrolled in groups of training master's degree program "Management in technical systems", "Computer and information science", "computer science", "engineering and technology land transport", "engineering and construction technology", "Photonics, instrumentation, optical and biotechnical systems and technology", "aerospace engineering", "engineering and technologies of shipbuilding and water transport", and also in the areas of "automation of technological processes and productions", "mechatronics and robotics".
45
Mosesov, Marat. Fundamentals of metal science and welding. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1085480.
Повний текст джерелаАнотація:
The textbook discusses the properties of metals used in construction, methods of their production and processing, as well as methods and technical means of performing welded joints.
The presented material meets the requirements of the federal state educational standards of higher education of the latest generation and the programs of the courses "Technology of structural materials" and "Metal Science and Welding", taught to students of the faculties "Industrial and Civil Engineering", "Hydraulic Engineering", "Heat and Gas Supply and Ventilation", "Construction of unique buildings and structures", as well as to first-year students of the Faculty" Mechanization, Automation and Electrification of Construction " and undergraduates studying the course of metal structures and technologies of structural materials.
It will be useful for students in mastering the lecture material, conducting laboratory work and completing diploma projects, as well as for students of advanced training courses and retraining of construction specialists.
46
Kovalenko, Vladimir. Design of information systems. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/987869.
Повний текст джерелаАнотація:
The tutorial discusses the design features of information systems (is) involved in the implementation of CALS technologies: MRP/MRPII/ERP systems, e-Commerce systems (B2B), supply chain management (SCM), customer relationship management (CRM), and decision support systems (OLAP). The issues of choosing the design technology, software tools for project development, building functional and information models in the environment of Business Studio, MS Visio, Elma, AllFusion Modeling Suite and Oracle Designer 10g, as well as the development of technical and operational documentation are highlighted. The characteristics of CASE technologies and their implementation in the Oracle Designer 10g environment are considered. A comparative analysis of the standards of the organization of the life cycle of creating and using IP, practical recommendations for the development of standard profiles, examples of the development of an IP project based on a cascading model of the life cycle, including using a process approach in the management and automation of processes. The models of the client — server architecture and the structure of cloud computing are considered. Modern approaches to the selection of ready-made is and their implementation in automated enterprises are studied in detail.
Meets the requirements of the Federal state educational standards of higher education of the latest generation.
It is intended for students (bachelors and specialists) and masters of higher educational institutions studying in the direction of "Applied Informatics". It is also recommended for teachers and specialists working in the field of information technology.
47
Bratko, Aleksandr. Automated control systems and communications: fundamentals of telecommunications. ru: INFRA-M Academic Publishing LLC., 2020. http://dx.doi.org/10.12737/1013017.
Повний текст джерелаАнотація:
The textbook provides a definition of communication, discusses the types and types of telecommunications, and the requirements for communication. It describes telecommunication signals, their parameters, and methods for converting, encoding, and transmitting various types of messages. The principles of construction of multi-channel transmission systems, their main characteristics, the device of terminal subscriber terminals, operational dispatch communication systems, manual and automatic telephone exchanges are described.
The principles of building radio communication facilities and rules for conducting radio exchange are considered. The technical characteristics of radio stations used in the EMERCOM and SBS of Russia are given. The basics of radio-relay, satellite, cellular and trunking communications are described.
Meets the requirements of the Federal state educational standard of higher education of the latest generation in the discipline "Automated control systems and communications".
It is intended for students of secondary professional educational institutions studying in the specialties 20.02.02 "protection in emergency situations" and 20.02.04 "Fire safety".
48
Adaskin, Anatoliy, Aleksandr Krasnovskiy, and Tat'yana Tarasova. Materials science and technology of metallic, non-metallic and composite materials:the technology of manufacturing blanks and parts. Book 2. ru: INFRA-M Academic Publishing LLC., 2021. http://dx.doi.org/10.12737/1143897.
Повний текст джерелаАнотація:
Book 2 presents the technologies for manufacturing blanks and parts from metal materials: casting, welding, pressure treatment and cutting. The basics of electroplating technology are given. The technologies of manufacturing parts from non-metallic materials are considered: plastics, rubber, glass, as well as composite materials. The technologies combining the production of composite materials and parts from them are shown.
The textbook is supplemented with two chapters reflecting the trends in the development of technology and technology (chapter 28 " Nanostructured materials. Features. Technologies for obtaining. Areas of application", chapter 29 "Additive manufacturing").
Meets the requirements of the federal state educational standards of higher education of the latest generation.
For bachelors and undergraduates studying in enlarged groups of training areas 15.00.00 "Mechanical Engineering" and 22.00.00 "Materials Technologies". It can be used for training graduate students of machine-building specialties, as well as for advanced training of engineering and technical workers of machine-building enterprises.
49
Savel'eva, Ekaterina. Digital labor platforms: new forms of labor organization and regulation. ru: INFRA-M Academic Publishing LLC., 2022. http://dx.doi.org/10.12737/1818511.
Повний текст джерелаАнотація:
The monograph presents an extensive study of new forms of labor organization in the context of the development of technical, technological, financial, economic and socio-cultural factors. The distinctive features of digital labor platforms, their classification, as well as the strategies of key players in the global and Russian-speaking distance labor markets are given. Based on the analysis of current international analytical reviews, foreign and domestic scientific publications, current legislation and court decisions, the author gives approaches and methods of regulatory regulation of platform labor.
The author does not ignore such controversial issues as: direct and indirect methods of state influence on the activities of digital labor platforms, problems of social responsibility, as well as prospects for the development of platform cooperativism in the world and Russia as an alternative to labor platforms focused on the global level.
It is of interest to researchers, government authorities, teachers of higher educational institutions, graduate students and students studying these problems.
50
Myeyeryakova, Vyera, and Viktor Starodubov. CNC Metal-cutting Machines. ru: INFRA-M Academic Publishing LLC., 2015. http://dx.doi.org/10.12737/5721.
Повний текст джерелаАнотація:
In the manual various ways of control of metal-cutting machines are considered, the principles of construction and possibility of systems of ChPU are given. Features of configurations and designs of machines with ChPU are presented,
ways of expansion of their technological capabilities, increases of productivity, accuracy and reliability.
The tasks solved during the training of managing directors of programs, feature of technological preparation, mathematical calculations and control unitary enterprise are considered. Programming bases for machines about ChPU, methods of adjusting are given,
features of technological service and repair. It is intended for students of the higher educational institutions which are trained in the directions 151900 "Design-technology ensuring machine-building productions" (qualification — the bachelor) and 151000
"Technological machines and the equipment" (qualification — the bachelor) on a preparation profile "Metal-cutting machines and complexes", and also for preparation in lyceums, technical schools, on special courses of CNC operators, members of repair crews, technologists-programmers.