Дисертації з теми "High Voltage Application"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "High Voltage Application".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Wikström, Mats Olof Tobias. "MOS-controlled switches for high-voltage application /." Zürich, 2001. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=14025.
Повний текст джерелаMwaniki, Fredrick Mukundi. "High voltage boost DC-Dc converter suitable for variable voltage sources and high power photovoltaic application." Diss., University of Pretoria, 2013. http://hdl.handle.net/2263/37320.
Повний текст джерелаDissertation (MEng)--University of Pretoria, 2013.
gm2014
Electrical, Electronic and Computer Engineering
Unrestricted
Dettmer, Hartmut. "MOS controlled power devices for high voltage application /." [S.l.] : [s.n.], 1994. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=10825.
Повний текст джерелаZhou, Yao. "High voltage DC/DC converter for offshore wind application." Thesis, University of Edinburgh, 2015. http://hdl.handle.net/1842/18749.
Повний текст джерелаLoh, Chee Keong Richard Marcus. "Phase shifted bridge converter for a high voltage application." Thesis, University of Edinburgh, 2003. http://hdl.handle.net/1842/12459.
Повний текст джерелаMohamad, Azwadi. "Surface fluorinated epoxy resin for high voltage DC application." Thesis, University of Southampton, 2015. https://eprints.soton.ac.uk/410354/.
Повний текст джерелаWerelius, Peter. "Development and application of high voltage dielectric spectroscopy for diagnosis of medium voltage XLPE cables." Doctoral thesis, KTH, Electrical Systems, 2001. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-3278.
Повний текст джерелаWhen polymer power cables were introduced into mediumvoltage applications in the late 1960s, the degradationphenomenon later referred to aswater treeingwas still unknown. However, this changedwithin a relatively short space of time. Just 5-10 years afterthese first polymer applications, faults began to appear thatcould be attributed to the new phenomenon-water treeing. Sincethen, cable manufacturers have been improving their designsgradually, and cables produced today are assumed to have muchlower susceptibility to water trees. However, water treeing isstill assumed to be the most important degradation process inthese applications.
There are huge amounts of polymer cable installations thatare degraded by water trees. Since many of these cables areinstalled in the same grid nets, one cable fault oftengenerates another. If two or more cables fail at the same time,the consequences can be extensive. A non-destructive diagnosticmethod makes it possible to assess cables and take action priorto failures.
This thesis presents the results of research work on thedevelopment of a measurement technique and diagnostic methodfor the assessment of medium voltage XLPE cables in the field.The method used is called high voltage dielectric spectroscopy,and involves the measurement of capacitance and loss as afunction of frequency at high voltages. The method is used in ashort frequency range of approximately one decade in thelow-frequency region (normally from 1 down to 0.1 Hz). Thevoltage levels used initially are all below the service-voltagelevel. If the cable is assessed to be free from water trees, aslightly increased voltage can be used.
Based on dielectric-spectroscopy measurements, specificwater-tree analysis and breakdown tests, a set of measurementprocedures and criteria that take into account differences incable designs has been proposed for the assessment of mediumvoltage XLPE cables. The characteristic responses of XLPEcables (in both non and water-tree-deteriorated cases) make itpossible to separate the cable response from the influence ofaccessories. Field experience shows thatwater-tree-deteriorated cables with relatively low breakdownstrengths can remain in service for many years.
Keywords:dielectric spectroscopy, high voltage,variable frequency, diagnostics, non-destructive diagnostics,cables, medium voltage, polymer, XLPE, water trees, watertreeing
Motto, Kevin. "Application of High-Power Snubberless Semiconductor Switches in High-Frequency PWM Converters." Thesis, Virginia Tech, 2000. http://hdl.handle.net/10919/35778.
Повний текст джерелаMaster of Science
Bashour, Rami. "High voltage optical fibre sensor for use in wire relay electrical protection systems." Thesis, University of Derby, 2016. http://hdl.handle.net/10545/621343.
Повний текст джерелаAsgarifar, Hajarossadat. "Application of high voltage, high frequency pulsed electromagnetic field on cortical bone tissue." Thesis, Queensland University of Technology, 2012. https://eprints.qut.edu.au/53105/1/Hajarossadat_Asgarifar_Thesis.pdf.
Повний текст джерелаGean, Richard T. "Comparison of PWM and resonant technologies in a high voltage DC application." Thesis, Virginia Tech, 1990. http://hdl.handle.net/10919/42080.
Повний текст джерелаHigh voltage transformers inherently contain undesirable parasitic reactances. A resonant circuit formed by the leakage inductance and parasitic reflected capacitance, makes various resonant technologies practical for high voltage dc applications. The components of a typical high voltage power stage will be investigated in order to identify these parasitics and determine their influence on converter operation. Proto-type high voltage converters will be designed and built using PWM and quasi-resonant techniques and experimental results will be given.
Dc analysis will be performed for the PWM and the quasi-resonant designs in order to obtain insight into the actual operation of the two converters. The design of the two proto-type converters will be reviewed and design guidelines will be established.
Master of Science
Ivanenko, Yevhen. "Estimation of electromagnetic material properties with application to high-voltage power cables." Licentiate thesis, Linnéuniversitetet, Institutionen för fysik och elektroteknik (IFE), 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:lnu:diva-64265.
Повний текст джерелаJoorabian, M. "Application of artificial intelligence for accurate fault location on transmission systems." Thesis, University of Bath, 1996. https://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336234.
Повний текст джерелаYe, Hanyu [Verfasser]. "Application of Non-Linear Microvaristor-Filled Materials in High-Voltage Devices and Algorithmic Optimization of High-Voltage Simulations Based on Surrogate Models / Hanyu Ye." Wuppertal : Universitätsbibliothek Wuppertal, 2015. http://d-nb.info/1071414860/34.
Повний текст джерелаFice, Martyn John. "The application of high-voltage electron lithography to the fabrication of semiconductor lasers." Thesis, University of Cambridge, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.293002.
Повний текст джерелаMohd, Noor Mohd Junaizee. "Application of knowledge-based fuzzy inference system on high voltage transmission line maintenance." Thesis, Queensland University of Technology, 2004. https://eprints.qut.edu.au/16050/1/Mohd_Junaizee_Mohd_Noor_Thesis.pdf.
Повний текст джерелаMohd, Noor Mohd Junaizee. "Application of knowledge-based fuzzy inference system on high voltage transmission line maintenance." Queensland University of Technology, 2004. http://eprints.qut.edu.au/16050/.
Повний текст джерелаKawano, Kayoko. "Application of the ultra high resolution, low voltage scanning electron microscopy in the materials science." Thesis, University of Manchester, 2012. https://www.research.manchester.ac.uk/portal/en/theses/application-of-the-ultra-high-resolution-low-voltage-scanning-electron-microscopy-in-the-materials-science(341c7955-1da7-49be-9dd3-a3f3248bae05).html.
Повний текст джерелаLee-Davey, Jon. "Application of machine olfaction principles for the detection of high voltage transformer oil degradation." Thesis, Cranfield University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.405216.
Повний текст джерелаZhang, Lanhua. "Derivation of Parabolic Current Control with High Precision, Fast Convergence and Extended Voltage Control Application." Diss., Virginia Tech, 2016. http://hdl.handle.net/10919/73319.
Повний текст джерелаPh. D.
van, der Wielen Klaas Peter. "Application of high voltage breakage to a range of rock types of varying physical properties." Thesis, University of Exeter, 2013. http://hdl.handle.net/10871/14522.
Повний текст джерелаDavari, Pooya. "High frequency high power converters for industrial applications." Thesis, Queensland University of Technology, 2013. https://eprints.qut.edu.au/62896/1/Pooya_Davari_Thesis.pdf.
Повний текст джерелаYeh, Chih-Shen. "Synchronous-Conduction-Mode Tapped-Inductor Buck Converter for Low-Power, High-Density Application." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/81722.
Повний текст джерелаMaster of Science
General-purpose step-down converter is essential in electronic system for processing energy from high-voltage rail to low-voltage circuits. The applications can be found at the auxiliary supplies in automobile, industrial and communication systems. Typically, the ultimate goals of general-purpose step-down converter are versatility, high efficiency and compact size. Recently, tapped-inductor (TI) buck converter is studied since it could overcome the drawback of commonly used buck converter under high step-down conversion. Therefore, the potential of TI buck converter as a general-purpose step-down converter candidate is explored in this thesis, including control method, hardware design, etc. The thesis verifies that TI buck converter could have compact size while remaining efficient and adaptable.
Reynes, Hugo. "Conception d'un module électronique de puissance pour application haute tension." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSEI035.
Повний текст джерелаThe supply of carbon-free energy is possible with renewable energy. However, windfarms and solar power plants are geographically away from the distribution points. Transporting the energy using the HVDC (High Voltage Direct Current) technology allow for a better yield along the distance and result in a cost effective approach compared to HVAC (High Voltage Alternative Current) lines. Thus, there is a need of high voltage power converters using power electronics. Recent development on wide bandgap semiconductors, especially silicon carbide (SiC) allow a higher blocking voltage (around 10 kV) that would simplify the design of such power electronic converters. On the other hand, the development on packaging technologies needs to follow this trend. In this thesis, an exploration of technological and normative limitation has been done for a high voltage power module design. The main hot spot are clearly identified and innovative solutions are studied to provide a proper response with a low impact on parasitic parameters. Partial Discharges (PD) on ceramic substrates is analyzed and a solution of a high Partial Discharge Inception Voltage (PDIV) is given based on geometrical parameters. The XHP-3 like power modules are studied and a solution allowing a use under 10 kV at a high pollution degree (PD3) is given
Ackermann, Roland. "Propagation of terawatt-femtosecond laser pulses and its application to the triggering and guiding of high-voltage discharges." Phd thesis, Université Claude Bernard - Lyon I, 2006. http://tel.archives-ouvertes.fr/tel-00133125.
Повний текст джерелаEn collaberation avec des installations haute-tension, nous avons déterminé la durée de vie du plasma du filament et la longueur sur laquelle il est possible de guider des décharges électriques. Nous avons pu augmenter l'efficacité de déclenchement avec une configuration à double impulsion. Enfin, nous avons montré que le déclenchement et le guidage sont possibles sous une pluie artificielle.
Ces résultats se sont révélés très encourageants en vue d'expériences LIDAR à lumière blanche et du contrôle de la foudre.
Basar, Joseph James. "Improvement of Ground-Fault Relaying Selectivity through the Application of Directional Relays to High-Voltage Longwall Mining Systems." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/9888.
Повний текст джерелаMaster of Science
El-Gamal, Mourad. "Generalized log-domain integrator structure & its application to the synthesis of high-frequency and low-voltage log-domain filters." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0006/NQ44420.pdf.
Повний текст джерелаMessali, Amir. "Contribution to Rotor Position and Speed Estimation for Synchronous Machine Drive Using High Frequency Voltage Injection : Application to EV/HEV Powertrains." Thesis, Ecole centrale de Nantes, 2019. http://www.theses.fr/2019ECDN0048.
Повний текст джерелаThis thesis is part of the Renault / Centrale Nantes Chair on improving the performance of electric vehicles (EV / HEV). It is dedicated to the problem of estimating the position / speed of self-sensing permanent magnet synchronous motors (PMSM) without mechanical sensors, using high frequency (HF) signal injection techniques over the full speed range of PMSM. In this context, several contributions have been proposed in the demodulation / signal processing and tracking algorithms parts of HF injection techniques, in order to improve the estimation of the position / speed of the MSAP compared to the existing methods. In the demodulation / signal processing part of the HF injection techniques, the contributions consisted of proposing original solutions making it possible to reduce the filtering effects in the estimation chain and to make the latter independent of the electrical machine parameters. In the tracking part, the contributions mainly concern the use of the function sign of the position error (instead of the position error) as measurement information, to estimate the position, the speed and the acceleration of self-sensing PMSM with firstorder sliding mode observers (conventional, step-by-step and adaptive). The contributions proposed in both parts have the advantages of robustifying the estimation chain by making it independent of electrical and mechanical parameters on the one hand. On the other hand, they allow improving the accuracy and performance of the estimation chain, and therefore the control of self-sensing PMSM, in transient and steady-state phases with an easy tuning method. The estimation methods developed were tested in simulation and experimentation on a test bench of electrical machines. The results obtained made it possible to highlight the performances of these methods in terms of trajectory tracking and robustness over the entire operating range of PMSM self-sensing control
Bonkarev, Maxim [Verfasser], and Harald [Akademischer Betreuer] Schwarz. "Concept analysis for High-Voltage Direct-Current circuit breakers for application in a network of HVDC transmission / Maxim Bonkarev ; Betreuer: Harald Schwarz." Cottbus : BTU Cottbus - Senftenberg, 2015. http://d-nb.info/1114283959/34.
Повний текст джерелаGALLESI, FEDERICO. "Investigation, Experimental Development, and Field Application of Non-Invasive Sensors for Partial Discharge Measurement." Doctoral thesis, Università degli studi di Genova, 2022. http://hdl.handle.net/11567/1082296.
Повний текст джерелаMoreau, Nicolas. "Decharge nanoseconde dans l'air et en melange air / propane. Application au declenchement de combustion." Phd thesis, Université Paris Sud - Paris XI, 2011. http://tel.archives-ouvertes.fr/tel-00633260.
Повний текст джерелаTse, Jonathan Michael. "High-Voltage Signal Generator for Biomedical Applications." Thesis, University of Canterbury. Electrical and Computer, 2011. http://hdl.handle.net/10092/7326.
Повний текст джерелаGiraneza, Martial. "High voltage direct current (HVDC) in applications for distributed independent power providers (IPP)." Thesis, Cape Peninsula University of Technology, 2013. http://hdl.handle.net/20.500.11838/1077.
Повний текст джерелаThe development of power electronics did remove most of technical limitations that high voltage direct current (HVDC) used to have. HVDC, now, is mostly used for the transmission of bulk power over long distances and for the interconnection of asynchronous grid. Along with the development of the HVDC, the growth of power demand also increased beyond the utilities capacities. Besides the on-going increasing of power demand, the reforms in electricity market have led to the liberalization and the incorporation of Independent power providers in power system operation. Regulations and rules have been established by regulating authority for grid integration of Independent power providers. With the expected increase of penetration level of those new independent power providers, result of economic reason and actual green energy trend, best method of integration of those new power plants are required. In this research HVDC technology, namely VSC-HVDC is used as interface for connecting independent power providers units to the grid. VSC-HVDC has various advantages such as short-circuit contribution and independent control of active and reactive power. VSC-HVDC advantages are used for a safe integration of IPPs and make them participate to grid stabilization. MATLAB/Simulink simulations of different grid connected, through VSC-HVDC system, IPPs technologies models are performed. For each IPP technology model, system model performances are studied and dynamics responses during the disturbance are analyzed in MATLAB/ Simulink program. The simulation results show that the model satisfy the standard imposed by the regulating authority in terms of power quality and grid support. Also the results show the effect of the VSC-HVDC in preventing faults propagation from grid to integrated IPPs units.
Rodriguez, John Israel 1972. "Distributing switch circuits for high voltage pulse applications." Thesis, Massachusetts Institute of Technology, 1999. http://hdl.handle.net/1721.1/80609.
Повний текст джерелаIncludes bibliographical references (p. 145).
by John Israel Rodriguez.
M.Eng.
Ghasemi, Zarir. "Stacking of IGBT devices for fast high-voltage high-current applications." Thesis, University of Strathclyde, 2007. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21731.
Повний текст джерелаChristou, Ilias. "Optimisation of high voltage electrical systems for aerospace applications." Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/optimisation-of-high-voltage-electrical-systems-for-aerospace-applications(9b8c70c0-7c82-4191-9199-bb05360f1b40).html.
Повний текст джерелаHolmgren, Jens. "Investigation of alternative current measurements in high-voltage applications." Thesis, Linköping University, Department of Science and Technology, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-8149.
Повний текст джерелаABB:s MACH2 system uses a number of currents to ignite thyristors for AC/DC-trassfformation and they are measured for control and protection. The measurement methods used today has major drawbacks. Two alternative techniques are investigated, one based on the Hall-Effect (HED) and the other based on Anisotropic Magnetoreistanse (AMR), both techniques sensing the magnetic field produced by currents in a conductor. The HED hawe low sensitivity so some kind of flux concentrators is needed. This adds volume, costs and complexity to the device. The AMR technique is much more sensitive than the HED. Unfortunately AMR are also much more sensitive for high over currents that may damage the devise, and they are not as common on te market. By testing linearity, step response and frequency dependency for some components, my conclusion is that HED components with toroidal flux concentrators utilizing magnetic feedback (Closed Loop, CL) may be used in this particular application. A drawback with CL are that they, when measuring sharp edged step signals, suffer from overshoots at the output that might activate the over current protection.
Zhang, Yi. "Modelling of photoconductive switches in high voltage power applications." Thesis, University of Brighton, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.239720.
Повний текст джерелаRogers, Michael. "High-speed low-voltage line driver for SerDes applications." Thesis, Oxford Brookes University, 2009. https://radar.brookes.ac.uk/radar/items/d7f9d856-ae6d-4eab-bb7d-aa54376560d6/1/.
Повний текст джерелаGithiari, Anthony Njoroge. "The design of semiconductor switches for high voltage applications." Thesis, University of Cambridge, 1996. https://www.repository.cam.ac.uk/handle/1810/272513.
Повний текст джерелаKhanna, Puneet. "High voltage conversion for MEMS applications using micromachined capacitors." [Tampa, Fla.] : University of South Florida, 2004. http://purl.fcla.edu/fcla/etd/SFE0000551.
Повний текст джерелаZabihi, Sasan. "Flexible high voltage pulsed power supply for plasma applications." Thesis, Queensland University of Technology, 2011. https://eprints.qut.edu.au/48137/1/Sasan_Zabihi_Sheykhrajeh_Thesis.pdf.
Повний текст джерелаMarzoughi, Alinaghi. "Investigating Impact of Emerging Medium-Voltage SiC MOSFETs on Medium-Voltage High-Power Applications." Diss., Virginia Tech, 2018. http://hdl.handle.net/10919/81822.
Повний текст джерелаPh. D.
Almohammed, Fouad. "Application des électrotechnologies pour une valorisation optimisée de la betterave à sucre dans un concept de bioraffinerie." Thesis, Compiègne, 2017. http://www.theses.fr/2017COMP2328/document.
Повний текст джерелаThis work discusses the use of electrotechnologies for an optimized valorization of sugar beet according to the concept of biorefinery. The applied electrotechnologies are pulsed electric fields (PEF) and high-voltage electrical discharges (HVED). The study firstly aims at optimizing an alternative method for sugar extraction by PEF assisted cold alkaline pressing. On the other hand, it proposes new ways for valorizing two by-products of sugar beet industry, which are sugar beet tails and pulps. In the first part, PEF treatment combined with liming leads to a better disintegration of beet tissue. It permits accelerating of pressing kinetics, improvement of juice yield and quality, and reduction of subsequent purification procedure. A parametric optimization study identified the best application itinerary of the proposed extraction process. Fresh sugar beet cossettes are pretreated by PEF at 600 V/cm for 10 ms (Q = 2.7 Wh/kg). The electroporated cossettes are then pressed to extract 75% of intracellular juice. Compressed cossettes are subjected to an alkaline pressing with 10% lime milk. In order to extract the residual sucrose in the obtained press-cake, two additional steps of pressing with an intermediate hydration are required. This optimized process allows well exhausting the sugar cossettes (sugar loss of 0.23% and pulp dry matter of 39%) for a short extraction (30 min) and with low draft (108%) compared to diffusion method. Thus, it allows substantial saving in materials and energy especially for juice extraction and pulp drying. Compared to the conventional method, the energy saving amounted to 91.96 × 106 kWh for a sugar beet factory treating 10 000 tons per day for a campaign of 110 days. In addition, the proposed method simplifies the purification procedure of raw juice and reduces the used amount of lime from 50 to 60%. In the second part of this study, two processing methods were proposed and optimized at lab-scale for valorization of sugar beet tails and pulps. Sugar beet tails were used to produce bioethanol. Raw juice of beet tails was extracted by PEF assisted cold pressing. Bioethanol production was then done by alcoholic fermentation. Pretreatment of beet tails with PEF (450 V/cm, 10 ms) permits accelerating the pressing kinetics, increasing the yield of solutes (79.85% vs. 16.8%), and leads to a more concentrated juice (10% vs. 5.2%). The optimized process permits the production of about 41.75 L of bioethanol per ton of beet tails when PEF pretreatment is applied against only 8.2 L of bioethanol without PEF confirming the potential of this new valorization scheme. Dried beet pulp having a dry matter of 92.8% was used for pectin recovery. The present study showed that the application of HVED pretreatment leads to intensify pectin extraction. The relative gain of pectin yield is 25.3% with an energy consumption of 76.2 kJ/kg. The proposed biorefinery scheme could protect the sugar beet industry in France after the suppression of the sugar quota system in the European Union, which will take effect on 1st October 2017
Kopeček, Pavel. "Analýza, vlastnosti a aplikace komerčně dostupných napěťových násobiček." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2011. http://www.nusl.cz/ntk/nusl-219161.
Повний текст джерелаRong, Hua. "Development of 4H-SiC power MOSFETs for high voltage applications." Thesis, University of Warwick, 2015. http://wrap.warwick.ac.uk/79426/.
Повний текст джерелаFisher, Craig A. "Development of 4H-SiC PiN diodes for high voltage applications." Thesis, University of Warwick, 2014. http://wrap.warwick.ac.uk/62126/.
Повний текст джерелаEfthymiou, Loizos. "GaN-on-silicon HEMTs and Schottky diodes for high voltage applications." Thesis, University of Cambridge, 2017. https://www.repository.cam.ac.uk/handle/1810/274912.
Повний текст джерелаOsgood, Karina, Andy Moysenko, Amy Webb, Dennis Schneider, Ronald Colangelo, Kenneth McMullen, Robert Wert, and Peter Muller. "A TRANSMITTER CHIP SET FOR WIRELESS TELEMETRY APPLICATIONS." International Foundation for Telemetering, 2001. http://hdl.handle.net/10150/606411.
Повний текст джерелаM/A-COM, Inc. has developed a highly integrated transmitter chip set for wireless telemetry applications under a U.S. Army Development Contract. The chip set is comprised of a voltage controlled oscillator (VCO), a silicon synthesizer/phase locked loop (PLL), and a family of power amplifiers (PA's). The chip-set is designed to operate over the military L and S Band frequencies as well as the lower commercial ISM band. Using these components, M/A-COM has produced IRIG compliant transmitter modules for ballistic telemetry applications. These modules have been successfully flight tested by the Army Research Laboratory at Aberdeen Proving Ground, Maryland. This paper reviews the transmitter system architecture and presents test data for the transmitter module and individual components.
Amankwah, Emmanuel K. "A parallel hybrid modular multilevel converter for high voltage DC applications." Thesis, University of Nottingham, 2013. http://eprints.nottingham.ac.uk/13845/.
Повний текст джерела