Дисертації з теми "HEAT VENTILATION AIR CONDITIONING"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "HEAT VENTILATION AIR CONDITIONING".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Gillott, Mark C. "A novel mechanical ventilation heat recovery/heat pump system." Thesis, University of Nottingham, 2000. http://eprints.nottingham.ac.uk/12148/.
Повний текст джерелаRolston, R. M. "The transfer of heat to a ground-source heat pump." Thesis, Queen's University Belfast, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373542.
Повний текст джерелаBöttcher, Christof. "An automotive carbon dioxide air-conditioning system with heat pump." Thesis, Port Elizabeth Technikon, 2003. http://hdl.handle.net/10948/206.
Повний текст джерелаTough, M. C. "A heat transfer model of forced convection, cross flow heat exchangers used in space heating." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.259171.
Повний текст джерелаPERONE, CLAUDIO. "Controlled mechanical ventilation to reduce primary energy consumption in air conditioning of greenhouses." Doctoral thesis, Università degli studi del Molise, 2018. http://hdl.handle.net/11695/83654.
Повний текст джерелаIn order to ensure optimal growing conditions inside greenhouse it becomes necessary a very close control of the internal climate conditions. In the first section, the available conditioning plant solutions are described. However, these systems generally require high investment costs. In addition, also high operational costs are required for an efficient solution without reducing yield crop or quality. Therefore, the winter conditioning of the internal air of a greenhouse occurs by means of fossil fuels. The use of a mechanical ventilation system contributes to a proper control of temperature, relative humidity and CO2 rate. However, the literature about the application of mechanical ventilation with heat recovery applied in greenhouses conditioning is very poor. For this purpose a research is being carried out. In section 2 a prototype of a mechanical ventilation unit and two climate rooms, for the reproduction of external and internal (built in laboratory) conditions, are described. The recovery unit is equipped with a heat pump and is able to increase the thermal energy recovered by the flow of exhaust air and through a high efficiency heat exchanger. A first study was carried on to evaluate the energy performances of the system during the control of temperature in winter season. Tests reported in section 3 were performed at different temperature values of simulated outdoor air TO (-5 °C, 0 °C, 5 °C and 10 °C) and a fixed (reference) internal simulated greenhouse temperature (20 °C). Each trial was performed with a ventilation flow rate of 535 m3/h. The resulting Coefficient Of Performance of the overall system (COPs) is 9.50 at 0 °C, 8.86 at 5 °C and 6.62 at 10 °C respectively. It has to be highlighted that during the trials carried out at -5°C the compressor behaved as an on-off type. This is due to a safety mechanism for the defrost of the evaporator. In addition, the ventilation flow rate was reduced to avoid a too low value of the supply air temperature. For the other trials (TO = 0 °C or 5 °C), the overall COPs decreases when the external temperature increases, due to a lower difference between external and indoor air enthalpy. To study a real case the mechanical ventilation unit was also installed at service of a greenhouse at Vivaio Verde Molise, Termoli – Italy. The experimental apparatus, described in detail in section 4, consists of the mechanical ventilation system, a perforated duct for air distribution, a fog system to adjust humidity and a supervision system to acquire the field data. Another dedicated supervision system allows measuring and collecting all the parameters of the prototype, such as thermophysical parameters of the airflow, thermophysical parameters of the refrigerant circuit of the heat pump, status and alarms of the unit. First tests, carried out on temperature control in winter season, are analysed in section 5. They show that the indoor air temperature (set at 27 °C) is suitable regulated by driving the unit with the reference probe installed on the recovery side. Only an offset of few Celsius degree is observed due to duct heat loss and the recovery grid placed on one side. Moreover, the mechanical ventilation system had also shown notable energy performance: COPs (mean value) of 5.4 and 5.7 at outdoor air temperature of 18.0 °C and 15.7 °C respectively. Finally, section 6 displays the main conclusions of the present work.
Ahmad, Mardiana Idayu. "Novel heat recovery systems for building applications." Thesis, University of Nottingham, 2011. http://eprints.nottingham.ac.uk/13852/.
Повний текст джерелаLiu, Shuli. "A novel heat recovery/desiccant cooling system." Thesis, University of Nottingham, 2008. http://eprints.nottingham.ac.uk/11602/.
Повний текст джерелаChen, Xiangjie. "Investigations of heat powered ejector cooling systems." Thesis, University of Nottingham, 2013. http://eprints.nottingham.ac.uk/29721/.
Повний текст джерелаChen, Jiu Fa. "Optimization of vapour compression air conditioner/heat pumps using refrigerant mixtures." Thesis, University of Leeds, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.343629.
Повний текст джерелаBoswell, Michael John. "Gas engines for domestic engine-driven heat pumps." Thesis, Oxford Brookes University, 1992. http://radar.brookes.ac.uk/radar/items/37f7ed18-4b86-6ab3-8ba6-1c27947fb1ce/1.
Повний текст джерелаWard, Jack. "Conventional and modular design of domestic heat pumps." Thesis, Sheffield Hallam University, 1999. http://shura.shu.ac.uk/20498/.
Повний текст джерелаAhmad, S. "Heat exchanger networks : Cost tradeoffs in energy and capital." Thesis, University of Manchester, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.376511.
Повний текст джерелаHouston, Stephen Douglas. "Tube-side flow and heat transfer in package boilers." Thesis, Heriot-Watt University, 1992. http://hdl.handle.net/10399/804.
Повний текст джерелаJames, K. A. "Dynamic mathematical modelling of refrigeration systems and heat pumps." Thesis, London South Bank University, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383651.
Повний текст джерелаMcGurn, Sean J. T. "Application of heat transfer models to boiler fouling monitoring." Thesis, Queen's University Belfast, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.282256.
Повний текст джерелаMohammad, W. S. "Space air-conditioning of mechanically-ventilated rooms : computation of flow and heat transfer." Thesis, Cranfield University, 1986. http://hdl.handle.net/1826/4022.
Повний текст джерелаMempouo, B. "Investigations of novel heat pump systems for low carbon homes." Thesis, University of Nottingham, 2011. http://eprints.nottingham.ac.uk/12043/.
Повний текст джерелаZhao, Xudong. "Investigation of a novel heat pipe solar collector/CHP system." Thesis, University of Nottingham, 2003. http://eprints.nottingham.ac.uk/11255/.
Повний текст джерелаEl-Hawat, Salem M. "Numerical modelling of flow and heat transfer for high-performance surfaces." Thesis, University of Brighton, 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.251804.
Повний текст джерелаTomski, Thomas. "The design of shell-and-tube heat exchangers using expert systems." Thesis, University of Brighton, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.314803.
Повний текст джерелаWhite, Peter. "On the application of artificial intelligence techniques to heat exchanger design." Thesis, University of Ulster, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.281354.
Повний текст джерелаAl-Dadah, Raya Khalil. "Electrohydrodynamic boiling heat transfer enhancement at the evaporator of refrigeration plants." Thesis, London South Bank University, 1994. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.386293.
Повний текст джерелаBabus'Haq, Ramiz F. "Optimal heat transfer design for district-heating and cooling pipelines in air-filled cavities." Thesis, Cranfield University, 1986. http://hdl.handle.net/1826/4214.
Повний текст джерелаFu, Yu. "Investigation of solar assisted heat pump system integrated with high-rise residential buildings." Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14582/.
Повний текст джерелаYik, Frances Wai Hung. "Methodologies for simulating heat and moisture transfer in air-conditioned buildings in sub-tropical climates." Thesis, Northumbria University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.357106.
Повний текст джерелаByerley, Aaron R. "Heat transfer near the entrance to a film cooling hole in a gas turbine blade." Thesis, University of Oxford, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329915.
Повний текст джерелаWorall, Mark. "An investigation of a jet-pump thermal (ice) storage system powered by low-grade heat." Thesis, University of Nottingham, 2001. http://eprints.nottingham.ac.uk/11111/.
Повний текст джерелаGrbál, Jakub. "Analýza větrání banky." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2020. http://www.nusl.cz/ntk/nusl-409864.
Повний текст джерелаTanton, D. M. "Some aspects of the use of water-filled heat stores in gas-fired central-heating systems." Thesis, Cranfield University, 1986. http://hdl.handle.net/1826/4186.
Повний текст джерелаChauvet, L. P. J. "Theoretical and experimental evaluations of the convective and conductive heat transfers in a domestic hot-water store." Thesis, Cranfield University, 1991. http://hdl.handle.net/1826/4209.
Повний текст джерелаAmer, Omar. "A heat pipe and porous ceramic based sub wet-bulb temperature evaporative cooler : a theoretical and experimental study." Thesis, University of Nottingham, 2017. http://eprints.nottingham.ac.uk/43343/.
Повний текст джерелаDavies, Gareth N. L. "Heat driven adsorption cooling utilising enhanced effective thermal conductivity monolithic adsorbent generators for refrigeration and ice production in developing countries." Thesis, University of Warwick, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364596.
Повний текст джерелаKamal, Rajeev. "Optimization and Performance Study of Select Heating Ventilation and Air Conditioning Technologies for Commercial Buildings." Scholar Commons, 2017. http://scholarcommons.usf.edu/etd/6656.
Повний текст джерелаMaghera-Entwistle, R. I. "Intermittently operated chemical heat pump : Slurried absorption systems and an investigation into the performance characteristics of methanolated potassium hydroxide in powdered form using methanol as the working fluid." Thesis, Cranfield University, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374001.
Повний текст джерелаDuarte, Marta. "Heat recovery units in ventilation : Investigation of the heat recovery system for LB20 and LB21 in Building 99, University of Gävle." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-21825.
Повний текст джерелаKlučáková, Markéta. "Zpětné získávání tepla ve vzduchotechnice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-372032.
Повний текст джерелаHancerli, Mustafa Yilmaz. "Appropriate Passive Cooling Strategies For Hot And Humid Climates: A Case Study In Cyprus." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609401/index.pdf.
Повний текст джерелаČerník, Václav. "Návrh vzduchotechniky a vytápění pro výrobní podnik." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-230487.
Повний текст джерелаSnopek, Milan. "Řešení vybraných aspektů chlazení jatek." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-226848.
Повний текст джерелаBergr, Josef. "Návrh a optimalizace provozu tepelného čerpadla." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2015. http://www.nusl.cz/ntk/nusl-227156.
Повний текст джерелаBareš, Josef. "Návrh větrání a chlazení v rodinném domě." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417131.
Повний текст джерелаBelock, Keith Allan. "An energy audit manual for small manufacturing companies with a case study of Maugus Manufacturing Company." Ohio : Ohio University, 1995. http://www.ohiolink.edu/etd/view.cgi?ohiou1179851925.
Повний текст джерелаTenora, Tomáš. "Solární zisky v budovách." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226020.
Повний текст джерелаHavlátová, Kristýna. "Větrání stravovacích provozů." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2018. http://www.nusl.cz/ntk/nusl-371911.
Повний текст джерелаФрановський, Ігор Олександрович, та Ihor Franovskyi. "Дослідження автоматизованої системи управління мікрокліматом приміщень". Master's thesis, Тернопільський національний технічний університет ім. І. Пулюя, Факультет прикладних інформаційних технологій та електроінженерії, Кафедра автоматизації технологічних процесів і виробництв, 2019. http://elartu.tntu.edu.ua/handle/lib/29822.
Повний текст джерелаУ кваліфікаційній роботі розроблено універсальний восьмиканальний мікропроцесорний регулятор-вимірювач регулятор на базі однокристальної мікроЕОМ MSC51 призначений для побудови автоматичних систем контролю і регулювання системи мікроклімату та канального опалення, вентиляційних установок загально-обмінного типу, припливно-витяжної вентиляції канального типу. Прилад виконує наступні основні функції: – дозволяє робити конфігурування функціональної схеми й установку програмованих робочих параметрів за допомогою вбудованої клавіатури керування; – робить вимір фізичних параметрів контрольованих вхідними первинними перетворювачами з урахуванням нелінійності їх «НСХ»; здійснює цифрову фільтрацію вимірюваних параметрів від промислових імпульсних перешкод; – дозволяє робити корекцію вимірюваних параметрів для усунення погрішностей первинних перетворювачів; – здійснює відображення результатів вимірів на вбудованому світлодіодному чотирьохрозрядному цифровому індикаторі; – формує аварійний сигнал при виявленні несправності первинних перетворювачів з відображенням його причини на цифровому індикаторі і при необхідності виводить його на зовнішню сигналізацію; – формує сигнали керування зовнішніми виконавчими механізмами і пристроями відповідно до заданого користувачем законами і параметрами регулювання; – здійснює відображення на вбудованому світлодіодному цифровому індикаторі заданих параметрів регулювання; – формує команди ручного керування виконавчими механізмами і пристроями з клавіатури приладу; – здійснює передачу комп'ютеру інформації про значення контрольованих давачами величин і встановлених робочих параметрів, а також приймає від нього дані на зміну цих параметрів.
The diploma thesis developed a universal eight-channel microprocessor controller-meter controller based on single-crystal microcomputer MSC51 designed for the construction of automatic systems for control and regulation of the system of microclimate and duct heating, ventilation units of general-exchange type, inflow-exhaust ventilation. The device performs the following basic functions: - allows you to configure the functional diagram and to set programmable operating parameters using the built-in control keyboard; - makes measurement of physical parameters controlled by input primary converters taking into account the nonlinearity of their "NSH"; - performs digital filtering of measured parameters from industrial impulse interference; - allows to make correction of measured parameters for elimination of errors of primary converters; - displays the measurement results on the built-in LED four-digit digital indicator; - generates an alarm when a primary converter malfunction is detected by displaying its cause on a digital display and, if necessary, outputs it to an external alarm; - generates control signals for external actuators and devices in accordance with user-defined laws and control parameters; - displays the set control parameters on the built-in LED digital indicator; - generates commands for manual control of actuators and devices from the instrument keyboard; - transmits to the computer information about the values of encoder-controlled values and set operating parameters, and also accepts data from him to change these parameters.
Анотація 3 Зміст 4 Вступ 7 1 Огляд літератури 10 1.1 Вентиляція 10 1.2 Вентиляція з механічним збудженням 10 1.3 Визначення потреби свіжого повітря. 12 1.4 Вимоги до сучасних систем вентиляції. 15 1.5 Кондиціонування повітря 16 1.6 Температура й вологість, швидкість повітря в приміщенні 16 1.7 Великі системи вентиляції 20 2 Науково-методична частина 29 2.1 Моделювання параметрів мікроклімату приміщень 29 2.2 Реалізація математичних моделей для розрахунку параметрів мікроклімату 38 2.3 Визначення ступеню комфортності параметрів мікроклімату. 45 3 Технологічна частина 48 3.1 Технології та методи розподілу повітря в системах управління мікрокліматом 48 3.2.1 Вентиляція перемішуванням 49 3.2.2 Вентиляція витисненням. 50 3.2 Автоматичне керування системою кондиціонування повітря 51 3.3 Залежність енергозбереження, експлуатаційних витрат від технологій систем вентиляції і кондиціонування. 52 4 Конструкторська частина 57 4.1 Призначення пристрою 58 4.2 Умови експлуатації: 59 4.3 Технічні характеристики 59 4.3 Пристрій та функціонування приладу 62 4.3.1. Схема функційна 62 4.3.2 Складові частини схеми 65 4.3.3 Вимірювання вхідних параметрів 68 4.3.4 Опитування давачів 68 4.3.5 Вимір поточних значень вхідних параметрів 69 4.3.6 Цифрова фільтрація вимірів 71 4.3.7 Корекція вимірів 73 4.3.8 Обчислення математичних величин 76 4.3.9 Індикація вимірюваних параметрів 77 4.3.10 Вихідні пристрої 79 4.4 Конструкція приладу 83 4.5 Монтаж приладу на об'єкті 85 4.6 Монтаж зовнішніх зв'язків 86 4.6.1 Загальні вимоги 86 4.6.2 Вказівки по монтажу 87 4.6.3 Підключення приладу 88 4.7 Загальне компонування системи автоматизованого управління параметрами 89 5 Спеціальна частина 91 5.1 Розробка алгоритмів роботи системи 91 5.2 Реалізація алгоритму ШІМ 93 5.3 Розробка основного алгоритму програми управління 95 6 Обгрунтування економчіної ефективності 99 6.1 Оцінка ефективності розробки і впровадження універсальної системи керування мікрокліматичними процесами на базі мікро-ЕОМ MSC 51 99 6.2 Вибір об'єкта для порівняння 99 6.3 Розрахунок капітальних витрат 100 6.4 Розрахунок і порівняння експлуатаційних витрат 100 6.5 Розрахунок амортизаційних відрахувань 100 6.6 Витрати на споживану електроенергію 102 6.7 Витрати на поточний ремонт 103 6.8 Розрахунок інших витрат 106 6.9 Розрахунок ефективності проектованої системи 106 6.10 Розрахунок економічного ефекту від виготовлення та експлуатації системи за розрахунковий період 107 7 Охорона праці та безпека в надзвичайних ситуаціях 110 7.1 Охорона праці 110 7.1.1 Визначення оптимальних умов праці інженера-оператора системи мікроклімату 110 7.1.2 Розрахунок освітленості робочого місця 114 7.2 Безпека в надзвичайних ситуаціях 118 7.2.1 Основні вражаючі фактори ядерних вибухів, їхні параметри і наслідки впливу на людей 118 7.2.2 Методи захисту та безпека підприємств промисловості, відновлення інженерно-технічного комплексу цеху (заводу) 121 7.2.3 Висновки розділу 122 8 Екологія 125 8.1 Актуальність охорони навколишнього середовища 125 8.2 Забруднення довкілля викликані реалізацією дипломного проекту та заходи по їх уникненню 125 8.3 Заходи по зменшенню шкідливих впливів і забруднень 131 Висновок 135 Перелік посилань. 138 Додатки 147
Kuegler, Kurt W. "Heating, ventilation and air conditioning engineering and design /." Online version of thesis, 1990. http://hdl.handle.net/1850/10982.
Повний текст джерелаEftekhari, M. M. "Optimal operation of an air-conditioning plant." Thesis, University of Oxford, 1988. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.234946.
Повний текст джерелаLeung, Wai-yip, and 梁偉業. "Indoor air quality and heating, ventilation & air conditioning systemsin office buildings." Thesis, The University of Hong Kong (Pokfulam, Hong Kong), 1997. http://hub.hku.hk/bib/B31253787.
Повний текст джерелаWan, Man Pun. "Comparison of underfloor ventilation systems and ceiling based ventilation system in thermal comfort and indoor air quality aspects /." View Abstract or Full-Text, 2002. http://library.ust.hk/cgi/db/thesis.pl?MECH%202002%20WAN.
Повний текст джерелаIncludes bibliographical references (leaves 61-63). Also available in electronic version. Access restricted to campus users.
Tang, Dechao. "Modelling of heating and air-conditioning system." Thesis, University of Strathclyde, 1985. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=21451.
Повний текст джерела