Добірка наукової літератури з теми "Hardware field simulator"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Hardware field simulator".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Hardware field simulator"
Ihrens, Jana, Stefan Möws, Lennard Wilkening, Thorsten A. Kern, and Christian Becker. "The Impact of Time Delays for Power Hardware-in-the-Loop Investigations." Energies 14, no. 11 (May 28, 2021): 3154. http://dx.doi.org/10.3390/en14113154.
Повний текст джерелаKozlova, A., Z. Li, J. R. Natvig, S. Watanabe, Y. Zhou, K. Bratvedt, and S. H. Lee. "A Real-Field Multiscale Black-Oil Reservoir Simulator." SPE Journal 21, no. 06 (October 25, 2016): 2049–61. http://dx.doi.org/10.2118/173226-pa.
Повний текст джерелаQueiroz, Janailson, Sarah Carvalho, Camila Barros, Luciano Barros, and Daniel Barbosa. "Embedding an Electrical System Real-Time Simulator with Floating-Point Arithmetic in a Field Programmable Gate Array." Energies 14, no. 24 (December 13, 2021): 8404. http://dx.doi.org/10.3390/en14248404.
Повний текст джерелаNayak, B. Sathish, Sidharth Bhonge, K. Krishna Naik, Odelu Ojjela, and Surendra Pal. "Multi GNSS IRNSS L5 IRNSS S1 and GPS L1 Hybrid Simulator A Reconfigurable Low cost Solution for Research and Defence Applications." Defence Science Journal 72, no. 4 (August 26, 2022): 581–91. http://dx.doi.org/10.14429/dsj.72.17873.
Повний текст джерелаVela-Garcia, L., J. Vázquez Castillo, R. Parra-Michel, and Matthias Pätzold. "An Accurate Hardware Sum-of-Cisoids Fading Channel Simulator for Isotropic and Non-Isotropic Mobile Radio Environments." Modelling and Simulation in Engineering 2012 (2012): 1–12. http://dx.doi.org/10.1155/2012/542198.
Повний текст джерелаCasolino, Giovanni, Mario Russo, Pietro Varilone, and Daniele Pescosolido. "Hardware-in-the-Loop Validation of Energy Management Systems for Microgrids: A Short Overview and a Case Study." Energies 11, no. 11 (November 1, 2018): 2978. http://dx.doi.org/10.3390/en11112978.
Повний текст джерелаSriram, Vinay, and David Kearney. "Towards A Multi-FPGA Infrared Simulator." Journal of Defense Modeling and Simulation: Applications, Methodology, Technology 4, no. 4 (October 2007): 343–55. http://dx.doi.org/10.1177/154851290700400404.
Повний текст джерелаJin, Shuo, Hao Yu, Xiaopeng Fu, Zhiying Wang, Kai Yuan, and Peng Li. "A Universal Design of FPGA-Based Real-Time Simulator for Active Distribution Networks Based on Reconfigurable Computing." Energies 12, no. 11 (May 31, 2019): 2086. http://dx.doi.org/10.3390/en12112086.
Повний текст джерелаChung, Yi, and Yee-Pien Yang. "Hardware-in-the-Loop Simulation of Self-Driving Electric Vehicles by Dynamic Path Planning and Model Predictive Control." Electronics 10, no. 19 (October 8, 2021): 2447. http://dx.doi.org/10.3390/electronics10192447.
Повний текст джерелаMuñoz-Quijada, Maria, Luis Sanz, and Hipolito Guzman-Miranda. "A Virtual Device for Simulation-Based Fault Injection." Electronics 9, no. 12 (November 24, 2020): 1989. http://dx.doi.org/10.3390/electronics9121989.
Повний текст джерелаДисертації з теми "Hardware field simulator"
Massi, Pavan Alessandro. "A hardware field simulator for photovoltaic materials applications." Doctoral thesis, Università degli studi di Trieste, 2008. http://hdl.handle.net/10077/2757.
Повний текст джерелаIl presente lavoro riguarda la descrizione di un simulatore di campo fotovoltaico (in seguito simulatore). Il simulatore è un convertitore elettronico di potenza che, alimentato dalla rete elettrica, riproduce la caratteristica tensione corrente di un campo fotovoltaico (insieme di moduli fotovoltaici connessi in serie e in parallelo) operante in condizioni climatiche di temperatura e irraggiamento arbitrarie. Il nuovo dispositivo verrà impiegato nell’ambito del laboratorio fotovoltaico cui fa riferimento l’impianto in via di realizzazione sul tetto dell’edificio che ospita il Dipartimento dei Materiali e delle Risorse Naturali dell’Università di Trieste. Il simulatore viene proposto come utile strumento per i progettisti di dispositivi solari funzionanti in sistemi fotovoltaici connessi in rete. In particolare, il simulatore permetterà di prevedere il funzionamento di nuovi moduli fotovoltaici operanti in condizioni di ombreggiamento arbitrario e inseriti in un sistema fotovoltaico reale. L’uso del simulatore sarà particolarmente efficace nel caso di simulazioni di tecnologie in film sottile come, ad esempio, il silicio amorfo, il tellururo di cadmio, ecc. Il simulatore sarà anche necessario per testare i componenti che fanno parte di un sistema fotovoltaico connesso in rete, con particolare riferimento ai sistemi di condizionamento della potenza (detti anche inverter). Tali sistemi, oltre a convertire la tensione continua prodotta dai moduli fotovoltaici in una tensione compatibile e sincronizzata con quella della rete, devono garantire istante per istante l’inseguimento del punto di massima potenza estraibile dal campo fotovoltaico cui sono connessi. Il lavoro è stato suddiviso in cinque capitoli. Il primo capitolo fornisce una breve descrizione dello stato dell’arte e di alcune aspetti economici relativi alla tecnologia fotovoltaica. Nel secondo capitolo vengono richiamati il modello classico di una cella solare e le definizioni riguardo le sue caratteristiche principali (punto di massima potenza, efficienza, fill factor, ecc.). Nello stesso capitolo un’overview sui materiali e sulle tecnologie utilizzate nella realizzazione dei dispositivi fotovoltaici divide, come suggerito da Martin Green, le celle solari in tre diverse generazioni: la prima comprende i dispositivi realizzati in silicio cristallino (mono e policrisallino), la seconda quelli in film sottile (in silicio amorfo, tellururo di cadmio CdTe, diseleniuro di rame e indio CIS, diseleniuro di rame, indio e gallio CIGS, diseleniuro di rame, indio, gallio e zolfo CIGSS) e le celle di Graetzel, e la terza le celle multigiunzione, a banda intermedia e quelle organiche. Nel capitolo tre viene fornita una descrizione dei componenti costituenti un sistema fotovoltaico connesso in rete e viene proposto un nuovo metodo per la determinazione delle caratteristiche corrente tensione e potenza tensione prodotte da dispositivi fotovoltaici. Il metodo risulta efficace in quanto non necessita di misure sperimentali da effetture sui diversi dispositivi. I dati forniti nei comuni data sheet che vengono forniti a corredo dei moduli fotovoltaici sono sufficienti a determinarne il comportamento al variare della temperatura di funzionamento e del livello di radiazione solare. L’efficienza di un sistema fotovoltaico (Balance Of the System, BOS) viene calcolata nel capitolo quattro. Particolare enfasi viene data all’effetto di mismatching che è tanto più importante quanto più è elevato il livello di ombreggiamento presente sul piano dei moduli fotovoltaici costituenti l’impianto. Infine, l’ultimo capitolo riguarda la descrizione del simulatore e delle sue applicazioni.
The subject of this work is a power electronic device, hereafter named photovoltaic field simulator, which converts the grid voltage into a current voltage characteristic. This characteristic replicates the behavior of a real photovoltaic field working in arbitrary conditions of irradiance and temperature. After building, the photovoltaic field simulator will be used in the photovoltaic laboratory which is connected to the experimental photovoltaic plant which will be installed on the roof top of the Materials and Natural Resources Department of Trieste University. The photovoltaic field simulator will be used for photovoltaic module parameters design with particular reference to its behavior when inserted in a photovoltaic field operating under shaded conditions. The use of the simulator will be particularly effective when simulating thin-film technologies as, for example, amorphous silicon, cadmium telluride, and etc. The photovoltaic field simulator will also be used for testing the components of grid connected photovoltaic systems with particular reference to the power conditioning units (also named inverters). These systems, which convert the direct current produced by the photovoltaic modules into a utility grade current (typically alternate and sinusoidal at a frequency of 50-60Hz), must extract maximum power from the photovoltaic field. The work is divided into five chapters. In the first a brief description of photovoltaic technology and its economic aspects is given. Chapter two is on classic solar cell modelling basics and on the definition of the parameters of photovoltaic technology (maximum power point, efficiency, fill factor, and etc.). In the same chapter a materials and technologies overview splits, as suggested by Martin Green, solar cells in three different generations: the first comprises crystalline silicon (mono and polycrystalline) devices, the second thin-film devices (amorphous silicon, cadmium telluride CdTe, copper indium diselenide CIS, copper indium gallium diselenide CIGS, copper indium gallium sulphur diselenide CIGSS), and the Graetzel cells, while the third multi-junction, intermediate band and organic photovoltaic devices. The third chapter briefly describes photovoltaic grid connected system components. In particular a new model for plotting photovoltaic current voltage and power voltage characteristics is provided. The method is original because only module data sheet parameters are used and experimental measurements are not needed in order to determine the photovoltaic modules behavior with reference to irradiance and working temperatures changes. In chapter four the Balance of a photovoltaic System (BOS) is calculated. In particular the importance of the mismatching effect of photovoltaic modules due to shaded conditions is shown. The last chapter is on simulator description and its applications.
XX Ciclo
1975
Sedaghat, Maman Reza. "Fault emulation reconfigurable hardware based fault simulation using logic emulation systems with optimized mapping /." [S.l. : s.n.], 1999. http://deposit.ddb.de/cgi-bin/dokserv?idn=95853893X.
Повний текст джерелаMekala, Priyanka. "Field Programmable Gate Array Based Target Detection and Gesture Recognition." FIU Digital Commons, 2012. http://digitalcommons.fiu.edu/etd/723.
Повний текст джерелаCemin, Paulo Roberto. "Plataforma de medição de consumo para comparação entre software e hardware em projetos energeticamente eficientes." Universidade Tecnológica Federal do Paraná, 2015. http://repositorio.utfpr.edu.br/jspui/handle/1/1310.
Повний текст джерелаThe large number of mobile devices increased the interest in low-power designs. Tools that allow the evaluation of alternative implementations give the designer actionable information to create energy-efficient designs. This paper presents a new power measurement platform able to compare the energy consumption of different algorithms implemented in software and in hardware. The proposed platform is able to measure the energy consumption of a specific process running in a general-purpose CPU with a standard operating system, and to compare the results with equivalent algorithms running in an FPGA. This allows the designer to choose the most energy-efficient software vs. hardware partitioning for a given application. Compared with the current state-of-the-art, the presented platform has four distinguishing features: (i) support for both software and hardware power measurements, (ii) measurement of individual code sections in the CPU, (iii) support for dynamic clock frequencies, and (iv) improvement of measurement precision. We also demonstrate how the developed platform has been used to analyze the energy consumption of network intrusion detection algorithms aimed at detecting probing attacks.
Palm, Johan. "High Performance FPGA-Based Computation and Simulation for MIMO Measurement and Control Systems." Thesis, Mälardalen University, School of Innovation, Design and Engineering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:mdh:diva-7477.
Повний текст джерелаThe Stressometer system is a measurement and control system used in cold rolling to improve the flatness of a metal strip. In order to achieve this goal the system employs a multiple input multiple output (MIMO) control system that has a considerable number of sensors and actuators. As a consequence the computational load on the Stressometer control system becomes very high if too advance functions are used. Simultaneously advances in rolling mill mechanical design makes it necessary to implement more complex functions in order for the Stressometer system to stay competitive. Most industrial players in this market considers improved computational power, for measurement, control and modeling applications, to be a key competitive factor. Accordingly there is a need to improve the computational power of the Stressometer system. Several different approaches towards this objective have been identified, e.g. exploiting hardware parallelism in modern general purpose and graphics processors.
Another approach is to implement different applications in FPGA-based hardware, either tailored to a specific problem or as a part of hardware/software co-design. Through the use of a hardware/software co-design approach the efficiency of the Stressometer system can be increased, lowering overall demand for processing power since the available resources can be exploited more fully. Hardware accelerated platforms can be used to increase the computational power of the Stressometer control system without the need for major changes in the existing hardware. Thus hardware upgrades can be as simple as connecting a cable to an accelerator platform while hardware/software co-design is used to find a suitable hardware/software partition, moving applications between software and hardware.
In order to determine whether this hardware/software co-design approach is realistic or not, the feasibility of implementing simulator, computational and control applications in FPGAbased hardware needs to be determined. This is accomplished by selecting two specific applications for a closer study, determining the feasibility of implementing a Stressometer measuring roll simulator and a parallel Cholesky algorithm in FPGA-based hardware.
Based on these studies this work has determined that the FPGA device technology is perfectly suitable for implementing both simulator and computational applications. The Stressometer measuring roll simulator was able to approximate the force and pulse signals of the Stressometer measuring roll at a relative modest resource consumption, only consuming 1747 slices and eight DSP slices. This while the parallel FPGA-based Cholesky component is able to provide performance in the range of GFLOP/s, exceeding the performance of the personal computer used for comparison in several simulations, although at a very high resource consumption. The result of this thesis, based on the two feasibility studies, indicates that it is possible to increase the processing power of the Stressometer control system using the FPGA device technology.
Shirai, Alysson Hikaru. "Estudo e implementação de sistemas de localização em hardware de lógica programável para utilização em rede de sensores sem fio." Universidade Tecnológica Federal do Paraná, 2013. http://repositorio.utfpr.edu.br/jspui/handle/1/511.
Повний текст джерелаRedes de sensores sem fio (RSSF) têm sido tema central de diversos estudos na atualidade. Em certas aplicações, como, por exemplo, as que necessitam saber de onde os dados estão sendo enviados ou em casos em que o próprio nó sensor precisa saber sua posição para executar alguma ação, mecanismos de localização se tornam imprescindíveis. Porém, a execução deste tipo de algoritmo é custosa para os nós sensores. Concomitantemente, o advento das low power FPGAs têm viabilizado a aplicação de dispositivos programáveis em RSSFs e aplicações envolvendo reconfiguração dinâmica de FPGA em nós sensores têm aumentado o uso destes dispositivos nestas redes. Unindo-se estas demandas, o objetivo desta dissertação é estudar e implementar sistemas de localização em hardware de lógica programável, visando atender aplicações voltadas a RSSF. Utilizando-se no nó sensor um bloco de hardware dedicado para realizar os cálculos de posição minimiza a utilização de seu CPU, podendo este hardware, inclusive, ser apenas uma parte de um sistema maior implementado na FPGA. O processo de localização baseia-se na utilização das distâncias entre o nó de posição desconhecida e os nós de referência, determinadas através de medição de RSSI, e o uso de algoritmos específicos que calculam a posição desejada. As principais etapas foram: revisão da literatura, modelagem do comportamento das medições de RSSI, análise do desempenho dos algoritmos e projeto de hardware. Através das simulações realizadas pôde-se desenvolver metodologias e ferramentas para a geração otimizada do hardware de localização. O desenvolvimento deste trabalho possibilitou analisar a aplicabilidade do ponto flutuante e ponto fixo, definir a arquitetura adequada para o hardware e o dimensionamento adequado da quantidade de bits necessária nas implementações.
Wireless sensor networks (WSN) have been the central theme of many researches in actuality. In certain applications, like, for example, the ones that need to know from where the data is being sent or in cases which the sensor node need to know its own position to perform some action, location mechanism is indispensable. However, the execution of these algorithms is costly for the sensor nodes. Concomitantly, the advent of low power FPGAs made feasible the application of programmable devices in WSNs and applications involving dynamic reconfiguration of FPGA in sensor nodes increased the use of these devices in WSNs. Joining these demands, the goal of this master thesis is to study and implement locating systems in programmable logic hardware, aiming at meeting applications in WSN. Employing a dedicated hardware block in sensor node to compute the position minimizes its CPU usage, and this hardware can even be just a part of a larger system implemented in FPGA. The localization process is based on the use of distances, measured between the sensor node with unknown position and the reference nodes, determined from RSSI measurements, and the use of specific algorithms that calculate the desired position. The main steps were: review of the literature, modeling the behavior of the RSSI measurements, performance analysis of the algorithms and hardware design. Through the performed simulations it was possible to develop methodologies and tools to generate optimized locating hardware. The development of this work allowed to evaluate the feasibility of the floating point and fixed point, to set the appropriate architecture for the hardware and to find the proper dimension of the number of bits required in the implementations.
Santos, Vitor Alexandre. "Caso de estudo de sistema de emulação em hardware para aplicação com controlador lógico programável." Universidade Tecnológica Federal do Paraná, 2016. http://repositorio.utfpr.edu.br/jspui/handle/1/2720.
Повний текст джерелаThis work is a case study of an industrial plant emulator implemented in FPGA (Field Programmable Gate Array), to simulate systems together with a PLC (Programmable Logic Controller). Based in manufacturing industry, practical results of an industrial process prototype are confronted with the results of an applied model in FPGA. The objective is to assist in testing application validation levels in development, approximation of factory floor conditions, optimization of control process and training in industrial automation based on PLC. As a proposal for the models, the research use characteristics of a closed loop speed control system and from this, a discrete system process, which uses as a basis a manufacturing process. Initially the bibliographic review presents works around simulation of systems and emulators based on reconfigurable hardware. Also are reviewed topics related to the manufacturing industry with the application of PLC, beside the GRAFCET modeling technique. Next, questions will set out questions about reconfigurable logic around FPGA devices. Following the explanation of the theme, we describe the used prototypes and the developed models developed in FPGA for the emulator. Finally the obtained data are compared. With the presentation of the results is possible to verify the similarity between the two systems, physical and modeling in the FPGA. The small differences detected in the results obtained, in some points of the simulation, are discussed at the end of the work.
Assef, Amauri Amorin. "Arquitetura de hardware multicanal reconfigurável com excitação multinível para desenvolvimento e testes de novos métodos de geração de imagens por ultrassom." Universidade Tecnológica Federal do Paraná, 2013. http://repositorio.utfpr.edu.br/jspui/handle/1/889.
Повний текст джерелаOs sistemas de diagnóstico por imagem de ultrassom (US) figuram entre os mais sofisticados equipamentos de processamento de sinais na atualidade. Apesar da alta tecnologia envolvida, a maioria dos sistemas comerciais de imagem possui arquitetura típica “fechada”, não atendendo às exigências de flexibilidade e acesso aos dados de radiofrequência (RF) para desenvolvimento e teste de novas modalidades e técnicas do US. Este trabalho apresenta uma nova arquitetura modular de hardware (front-end), baseada em dispositivos FPGA (Field Programmable Gated Array), e software (back-end), baseada em PC ou DSP, totalmente programável, aberta e flexível, para pesquisa e investigação de técnicas inovadoras para geração de imagens médicas por US. A plataforma desenvolvida ULTRA-ORS (do inglês Ultrasound Open Research System) permite conexão com transdutores multielementos dos tipos lineares, convexos e phased array com frequência central entre 500 kHz e 20 MHz, e capacidade de expansão para operação com transdutores de até 1024 elementos multiplexados. O módulo eletrônico lógico para formação do feixe (beamformer transmitter) possibilita excitação simultaneamente, através de sinais PWM, de 128 canais com formas de ondas arbitrárias, abertura programável, e tensão de excitação de até 200 Vpp, permitindo controle individual de habilitação, amplitude de apodização com até 256 níveis, ângulo de fase e atraso temporal de disparo adequado para focalização na transmissão. O módulo de recepção (beamformer receiver) realiza a aquisição simultânea de 128 canais com taxa de amostragem programável até 50 MHz e resolução de 12 bits. Como item imprescindível deste trabalho, a plataforma proposta possibilita acesso e transferência dos dados de RF digitalizados para um computador através de interfaces seriais ou para kits de DSP para processamento das imagens. Como resultado do projeto de pesquisa, é apresentado um novo sistema digital de US que pode ser utilizado para avaliações das imagens geradas pela técnica beamforming, utilizando como referência a ferramenta de simulação Field II e comparações com as imagens geradas por equipamentos comerciais em phantom mimetizador de tecidos biológicos de US.
Medical ultrasound (US) scanners are amongst the most sophisticated signal processing machines in use today. Even with the recent advances in electronic technology, their typical architecture is often “closed” and does not fit the requirements of flexibility and RF data access to the development and test of new modalities and US techniques. This work presents the development of a novel modular hardware architecture (front-end), FPGA-based (Field Programmable Gated Array) and software (back-end), PC-based or DSP-based, fully programmable, open and flexible, for research and investigation of new techniques for medical US imaging. The proposed platform, ULTRA-ORS (Ultrasound Open Research System), allows connection to linear, convex and phased array transducers with center frequency between 500 kHz and 20 MHz, and expansion capability for operation with transducers up to 1024 multiplexed elements. The transmitter beamformer can excite simultaneously, using PWM signals, 128-channel with arbitrary waveform, programmable aperture, and 200 Vpp excitation voltage, allowing individual enable control, amplitude apodization up to 256 levels, phase angle and proper time delay for focusing on transmission. The receiver beamformer can handle simultaneous 128-channels acquisition with programmable sampling rate up to 50 MHz and 12-bit resolution. As essential item of this work, the platform enables access to the raw RF signals to be transferred to a computer through serial ports or DSP kits for imaging processing. As a result of the research project, we present a new digital US system that can be used for evaluation of images generated by the beamforming technique, using as reference the Field II simulation tool and comparisons with commercial equipment using US tissue-mimicking phantom.
5000
Oliveira, Alisson Antônio de. "Estudo e implementação de operações em ponto fixo em FPGA com VHDL 2008: aplicação em controle de sistemas em tempo discreto." Universidade Tecnológica Federal do Paraná, 2012. http://repositorio.utfpr.edu.br/jspui/handle/1/473.
Повний текст джерелаThere are machines that need large processing speed for its correct working, these machines have a critical time response processing. When it is considered that aspect coupled with the need for control of static and dynamic behavior of a system arrives at the controller with strong demands on runtime. This dissertation compares discrete controllers implemented in fixed point with different accuracies, using for both the simulation of the behavior of controllers manufactured in Matlab command language and VHDL 2008. VHDL 2008 still in development and standardization by the IEEE. The VHDL language is used in FPGAs that are high speed devices with parallel processing capability. The main objective of this work is the study and implementation of discrete controllers in FPGA with the help of the VHDL 2008 language, determining its strengths and limitations, particularly in regard to the structure of programming, error analysis and demand for resources. Results show that accuracy still need some improvements a standard to the VHDL 4.0, known as VHDL 2008, is delivered to the market a stable standard. However, knowing it limitations, it is possible implementations and use in conversion of analog signals to discrete, such as control and dynamic systems simulation like servomechanisms.
Lin, Heng-An, and 林恆安. "The magnetic field simulation instrument for the hardware-in-the-loop testing of Satellite attitude control." Thesis, 2018. http://ndltd.ncl.edu.tw/handle/4ktg59.
Повний текст джерела國立中央大學
機械工程學系
106
This study is to develop a programmable, high-resolution dynamic magnetic field simulator by the Helmholtz Coil, which uses feed-forward control and feedback control to offset the external magnetic field disturbance to make a highly accurate dynamic magnetic field to supply Magnetic systems perform hardware-in-the-loop testing. The magnetic field is planned to have two modes: static magnetic field and dynamic magnetic field. The magnetic field range is +100000nT~-100000nT. The dynamic magnetic field can set the satellite orbit and initial attitude, simulate the magnetic field history of the satellite running in the orbit, and accept the satellite force feedback to calculate the attitude history, provide magnetic actuation attitude control system verification, and hardware-in-the-loop testing. Static magnetic fields can provide magnetic sensor for calibration and hardware-in-the-loop testing.
Книги з теми "Hardware field simulator"
Cangelosi, Angelo, and Minoru Asada, eds. Cognitive Robotics. The MIT Press, 2022. http://dx.doi.org/10.7551/mitpress/13780.001.0001.
Повний текст джерелаЧастини книг з теми "Hardware field simulator"
Dalton, Damian, Vivian Bessler, Jeffery Griffiths, Andrew McCarthy, Abhay Vadher, Rory O’Kane, Rob Quigley, and Declan O’Connor. "APPLES: A Full Gate-Timing FPGA-Based Hardware Simulator." In Field Programmable Logic and Application, 1162–65. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-45234-8_144.
Повний текст джерелаParreira, A., J. P. Teixeira, A. Pantelimon, M. B. Santos, and J. T. de Sousa. "Fault Simulation Using Partially Reconfigurable Hardware." In Field Programmable Logic and Application, 839–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2003. http://dx.doi.org/10.1007/978-3-540-45234-8_81.
Повний текст джерелаLyu, Zhi feng, Li guo Xu, Xiao hu Fan, Jian yong Wang, and Ning Liu. "Geomagnetic Field Simulation in Hardware-in-the-Loop Simulation System for Geomagnetic Navigation." In Advances in Intelligent Systems and Computing, 173–80. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1843-7_22.
Повний текст джерелаXing, Zhaodong. "Multi-tracking Channels’ Hardware Simulation for GNSS Integrity Receiver Design in Transport Field." In Proceedings of the 2013 International Conference on Electrical and Information Technologies for Rail Transportation (EITRT2013)-Volume I, 403–12. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-642-53778-3_39.
Повний текст джерелаWang, Liang, and Jianxin Zhao. "Performance Accelerators." In Architecture of Advanced Numerical Analysis Systems, 191–213. Berkeley, CA: Apress, 2022. http://dx.doi.org/10.1007/978-1-4842-8853-5_7.
Повний текст джерелаBorgeest, Kai, and Daniel Kern. "Safe Development Environments for Radiation Tracing Robots." In Handbook of Research on Advanced Mechatronic Systems and Intelligent Robotics, 126–38. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-0137-5.ch006.
Повний текст джерелаRyan, Conor, Michael Tetteh, Jack McEllin, Douglas Mota-Dias, Richard Conway, and Enrique Naredo. "ADDC: Automatic Design of Digital Circuit." In Genetic Algorithms [Working Title]. IntechOpen, 2022. http://dx.doi.org/10.5772/intechopen.104410.
Повний текст джерелаGazzano, Julio Daniel Dondo, Fernando Rincon Calle, Julian Caba, David de la Fuente, and Jesus Barba Romero. "Dynamic Reconfiguration for Internal Monitoring Services." In Field-Programmable Gate Array (FPGA) Technologies for High Performance Instrumentation, 124–36. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-5225-0299-9.ch006.
Повний текст джерелаTarver, Emily. "Virtual Simulation." In Emerging Advancements for Virtual and Augmented Reality in Healthcare, 65–81. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-8371-5.ch005.
Повний текст джерелаMahmoud, Imbaby Ismail, and Mohamed S. El Tokhy. "Development of Algorithms and Their Hardware Implementation for Gamma Radiation Spectrometry." In Field-Programmable Gate Array (FPGA) Technologies for High Performance Instrumentation, 17–41. IGI Global, 2016. http://dx.doi.org/10.4018/978-1-5225-0299-9.ch002.
Повний текст джерелаТези доповідей конференцій з теми "Hardware field simulator"
Karkee, Manoj, Madhu Monga, Brian L. Steward, Joseph Zambreno, and Atul G. Kelkar. "Real-Time Simulation and Visualization Architecture With Field Programmable Gate Array (FPGA) Simulator." In ASME 2010 World Conference on Innovative Virtual Reality. ASMEDC, 2010. http://dx.doi.org/10.1115/winvr2010-3772.
Повний текст джерелаCulic, Ioana, Alexandru Radovici, and Calin Dumitru. "HARDWARE SIMULATOR FOR TEACHING INTERNET OF THINGS." In eLSE 2020. University Publishing House, 2020. http://dx.doi.org/10.12753/2066-026x-20-098.
Повний текст джерелаMartins Mothé, João Elias, and Cedric Cordeiro. "Nanosats’ behavior hardware in the loop simulator under earth’s low orbit magnetic field, LEO." In 24th ABCM International Congress of Mechanical Engineering. ABCM, 2017. http://dx.doi.org/10.26678/abcm.cobem2017.cob17-2175.
Повний текст джерелаÖzdemirci, Sahir Deniz, and Filip Škultéty. "Upgrade of the BITD to an online multirole simulator." In Práce a štúdie. University of Žilina, 2021. http://dx.doi.org/10.26552/pas.z.2021.1.19.
Повний текст джерелаPavan, A. Massi, S. Castellan, and G. Sulligoi. "An innovative photovoltaic field simulator for hardware-in-the-loop test of power conditioning units." In 2009 International Conference on Clean Electrical Power (ICCEP). IEEE, 2009. http://dx.doi.org/10.1109/iccep.2009.5212086.
Повний текст джерелаHöhn, Patrick, Roger Aragall, Michael Koppe, and Joachim Oppelt. "Modeling, Simulation and Validation of the Fluid Temperature of a Physical Drilling Simulator for Experimental Planning." In ASME 2018 37th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2018. http://dx.doi.org/10.1115/omae2018-77275.
Повний текст джерелаGalindo-Garci´a, Iva´n F., Antonio Tavira-Mondrago´n, and Sau´l Rodri´guez-Lozano. "A Hydroelectric Plant Simulation Model to Test the Performance of Actual Governor Control Systems." In ASME 2008 Power Conference. ASMEDC, 2008. http://dx.doi.org/10.1115/power2008-60152.
Повний текст джерелаMiddya, Usuf, Abdulrahman Manea, Maitham Alhubail, Todd Ferguson, Thomas Byer, and Ali Dogru. "A Massively Parallel Reservoir Simulator on the GPU Architecture." In SPE Reservoir Simulation Conference. SPE, 2021. http://dx.doi.org/10.2118/203918-ms.
Повний текст джерелаKim, Sung-Soo, Wan Hee Jeong, and Seonghoon Kim. "Compliance Effect Consideration for Real-Time Multibody Vehicle Dynamics Using Quasi-Static Analysis." In ASME 2007 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2007. http://dx.doi.org/10.1115/detc2007-34739.
Повний текст джерелаGhabcheloo, Reza, Mika Hyvo¨nen, Jarno Uusisalo, Otso Karhu, Juha Ja¨ra¨, and Kalevi Huhtala. "Autonomous Motion Control of a Wheel Loader." In ASME 2009 Dynamic Systems and Control Conference. ASMEDC, 2009. http://dx.doi.org/10.1115/dscc2009-2653.
Повний текст джерела