Статті в журналах з теми "Grinding -Alloys"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Grinding -Alloys".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Niu, Qiu Lin, Guo Giang Guo, Xiao Jiang Cai, Zhi Qiang Liu, and Ming Chen. "Analysis of Specific Energy of TC18 and TA19 Titanium Alloys in Surface Grinding." Advanced Materials Research 325 (August 2011): 147–52. http://dx.doi.org/10.4028/www.scientific.net/amr.325.147.
Повний текст джерелаZhang, Hong Xia, Wu Yi Chen, Xiu Zhuo Fu, and Li Xia Huang. "Grinding Characteristics and Mechanism of Ceramic Alumina Wheels on Aeronautical Alloys." Advanced Materials Research 591-593 (November 2012): 373–76. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.373.
Повний текст джерелаЛосев, Е., E. Losev, В. Попов, V. Popov, Д. Лобанов, D. Lobanov, П. Архипов, P. Arkhipov, А. Янюшкин, and A. Yanyushkin. "Surface quality of tungstenfree hard alloys after diamond machining." Science intensive technologies in mechanical engineering 1, no. 1 (January 31, 2016): 20–24. http://dx.doi.org/10.12737/17318.
Повний текст джерелаNosenko, Vladimir A., S. V. Nosenko, and V. E. Puzirkova. "Grinding of Titanium Alloys." Key Engineering Materials 887 (May 2021): 287–93. http://dx.doi.org/10.4028/www.scientific.net/kem.887.287.
Повний текст джерелаTakahashi, Masatoshi, Masafumi Kikuchi, and Yukyo Takada. "Grindability of Ti−Nb−Cu Alloys for Dental Machining Applications." Metals 12, no. 5 (May 18, 2022): 861. http://dx.doi.org/10.3390/met12050861.
Повний текст джерелаShi, Zhong De, and Helmi Attia. "Feasibility Study on Grinding of Titanium Alloys with Electroplated CBN Wheels." Advanced Materials Research 797 (September 2013): 73–78. http://dx.doi.org/10.4028/www.scientific.net/amr.797.73.
Повний текст джерелаSyreyshchikova, Nelli Vladimirovna, Viktor Ivanovich Guzeev, Dmitrii Valerievich Ardashev, Danil Yurievich Pimenov, Karali Patra, Wojciech Kapłonek, and Krzysztof Nadolny. "A Study on the Machinability of Steels and Alloys to Develop Recommendations for Setting Tool Performance Characteristics and Belt Grinding Modes." Materials 13, no. 18 (September 8, 2020): 3978. http://dx.doi.org/10.3390/ma13183978.
Повний текст джерелаOkuyama, Shigeki, Akinori Yui, and Takayuki Kitajima. "Grinding Performance of a Grain-Arranged Diamond Wheel against Aluminum Alloys and Ti6Al4V." Advanced Materials Research 126-128 (August 2010): 107–12. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.107.
Повний текст джерелаSyreyshchikova, Nelli Vladimirovna, Danil Yurievich Pimenov, Munish Kumar Gupta, Krzysztof Nadolny, Khaled Giasin, and Shubham Sharma. "Establishing the Relationship between Cutting Speed and Output Parameters in Belt Grinding on Steels, Aluminum and Nickel Alloys: Development of Recommendations." Materials 14, no. 8 (April 15, 2021): 1974. http://dx.doi.org/10.3390/ma14081974.
Повний текст джерелаTao, Yi Yi, Jiu Hua Xu, and Wen Feng Ding. "A Study on Grinding Performance of Porous NiTi Shape Memory Alloy." Key Engineering Materials 359-360 (November 2007): 143–47. http://dx.doi.org/10.4028/www.scientific.net/kem.359-360.143.
Повний текст джерелаMizutani, M., Noriyuki Hisamori, T. Mizuno, A. Ezura, I. Ohuchi, H. Ohmori, K. Fujiwara, K. Doi, and K. Kuramoto. "Corrosion Wear Characteristics of ELID-Ground Co-Cr Alloy with Applying Abrasion by Ultra High Molecular Weight Polyethylene (UHMWPE)." Advanced Materials Research 325 (August 2011): 201–7. http://dx.doi.org/10.4028/www.scientific.net/amr.325.201.
Повний текст джерелаSyreyshchikova, Nelli Vladimirovna, Danil Yurievich Pimenov, Munish Kumar Gupta, Krzysztof Nadolny, Khaled Giasin, Muhammad Aamir, and Shubham Sharma. "Relationship between Pressure and Output Parameters in Belt Grinding of Steels and Nickel Alloy." Materials 14, no. 16 (August 20, 2021): 4704. http://dx.doi.org/10.3390/ma14164704.
Повний текст джерелаYuan, Suo Xian, and Bo Bi. "Experimental Study on the Belt Grinding Mechanism for Aluminum Alloys." Applied Mechanics and Materials 16-19 (October 2009): 60–64. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.60.
Повний текст джерелаJackson, M. J., and V. Ruxton. "Creep-Feed Grinding Wheel Development for Safely Grinding Aerospace Alloys." Journal of Materials Engineering and Performance 30, no. 3 (February 2, 2021): 2220–28. http://dx.doi.org/10.1007/s11665-021-05489-7.
Повний текст джерелаHasuda, Yuichi, Asahi Handa, Yuki Kobori, Shinichi Kinebuchi, Toshiaki Furusawa, and Yasuo Harigaya. "Grinding of Super-Alloys Using Metal-Bonded CBN Wheel." Key Engineering Materials 523-524 (November 2012): 143–48. http://dx.doi.org/10.4028/www.scientific.net/kem.523-524.143.
Повний текст джерелаYang, Chang Yong, Jiu Hua Xu, and Wen Feng Ding. "Grinding Force in Creep Feed Grinding of Titanium Alloy with Monolayer Brazed CBN Wheels." Advanced Materials Research 565 (September 2012): 94–99. http://dx.doi.org/10.4028/www.scientific.net/amr.565.94.
Повний текст джерелаMedvedeva, Olga, Pavel Arkhipov, and Alexander Yanyushkin. "Influence of hard alloys CEDG modes on the size of dissolved layer." MATEC Web of Conferences 224 (2018): 03002. http://dx.doi.org/10.1051/matecconf/201822403002.
Повний текст джерелаBuinovskiy, Aleksander, Vladimir Sofronov, Evgenii Kartashov, and Mikhail Kalaev. "Hydrogenation of Nd-Fe Alloys under Conditions of Different Pressure and Hydrogen Concentration." Key Engineering Materials 683 (February 2016): 44–52. http://dx.doi.org/10.4028/www.scientific.net/kem.683.44.
Повний текст джерелаFu, Yu Can, Hong Jun Xu, and Fang Hong Sun. "Experimental Study on Creep Feed Deep Grinding Titanium Alloy with Slotted CBN Grinding Wheel." Key Engineering Materials 304-305 (February 2006): 166–70. http://dx.doi.org/10.4028/www.scientific.net/kem.304-305.166.
Повний текст джерелаShimada, Keita, Nobuhito Yoshihara, Jiwang Yan, Tsunemoto Kuriyagawa, Yuichiro Sueishi, and Hideshi Tezuka. "Ultrasonic-Assisted Grinding of Ultra-High Purity SUS 316L." International Journal of Automation Technology 5, no. 3 (May 5, 2011): 427–32. http://dx.doi.org/10.20965/ijat.2011.p0427.
Повний текст джерелаIkari, Tatsuki, Takayuki Kitajima, and Akinori Yui. "Effect of Types of Grinding Fluid on Grinding Characteristics of CMSX4." International Journal of Automation Technology 16, no. 1 (January 5, 2022): 43–51. http://dx.doi.org/10.20965/ijat.2022.p0043.
Повний текст джерелаNovák, Martin, Natasa Naprstkova, and Ludek Ruzicka. "New Ways in Aluminium Alloys Grinding." Key Engineering Materials 496 (December 2011): 132–37. http://dx.doi.org/10.4028/www.scientific.net/kem.496.132.
Повний текст джерелаHung, Phi-Trong, Hoang-Tien Dung, Nguyen-Kien Trung, and Truong-Hoanh Son. "The study on surface grinding process of TI–6AL–4V alloy with resinoid cBN grinding wheel." International Journal of Modern Physics B 34, no. 22n24 (August 19, 2020): 2040135. http://dx.doi.org/10.1142/s0217979220401359.
Повний текст джерелаLv, Shenjin, Wei Wei, and Yang Qiao. "Study on the effect of magnetic needle grinding on the surface integrity and service performance of medical Mg-0.8Ca alloy." Journal of Physics: Conference Series 2469, no. 1 (March 1, 2023): 012021. http://dx.doi.org/10.1088/1742-6596/2469/1/012021.
Повний текст джерелаNosenko, Vladimir A., Alexander V. Fetisov, and Nikita D. Serdyukov. "Study of Metal, Silicon Carbide Crystals and Ceramic Bond Transfer to the Surface of Titanium Alloy during Grinding." Solid State Phenomena 316 (April 2021): 515–20. http://dx.doi.org/10.4028/www.scientific.net/ssp.316.515.
Повний текст джерелаMing, Wei Wei, Qing Long An, and Ming Chen. "Analysis on Centerless Grinding of Titanium Alloy." Key Engineering Materials 416 (September 2009): 509–13. http://dx.doi.org/10.4028/www.scientific.net/kem.416.509.
Повний текст джерелаBeranoagirre, A., and L. N. López de Lacalle. "Grinding of Gamma TiAl Intermetallic Alloys." Procedia Engineering 63 (2013): 489–98. http://dx.doi.org/10.1016/j.proeng.2013.08.182.
Повний текст джерелаPackeisen, A., and W. Theisen. "Turning and Grinding of Hard Alloys." Advanced Engineering Materials 1, no. 1 (September 1999): 35–48. http://dx.doi.org/10.1002/(sici)1527-2648(199909)1:1<35::aid-adem35>3.0.co;2-w.
Повний текст джерелаZhang, Xiaodong, Xiaoyang Jiang, Maojun Li, and Pan Gong. "Surface Morphology and Subsurface Microstructure Evolution When Form Grinding 20Cr2Ni4A Alloys." Materials 16, no. 1 (January 2, 2023): 425. http://dx.doi.org/10.3390/ma16010425.
Повний текст джерелаZnamenskii, L. G., A. N. Franchuk, and A. A. Yuzhakova. "Nanostructured Materials in Preparation Casting Alloys." Materials Science Forum 946 (February 2019): 668–72. http://dx.doi.org/10.4028/www.scientific.net/msf.946.668.
Повний текст джерелаHuo, Wen Guo, Jiu Hua Xu, and Yu Can Fu. "Grinding Force and Surface Integrity on Dry Belt Grinding of TA15 Titanium Alloys." Key Engineering Materials 416 (September 2009): 269–73. http://dx.doi.org/10.4028/www.scientific.net/kem.416.269.
Повний текст джерелаJiang, Bin, Yu Can Fu, Zheng Cai Zhao, Bo Ping, Hai Ning Wang, and Wen Feng Ding. "Experimental Study on Profile Machining of Titanium Alloys with Superabrasive Tools." Advanced Materials Research 1136 (January 2016): 60–65. http://dx.doi.org/10.4028/www.scientific.net/amr.1136.60.
Повний текст джерелаDing, Wen Feng, Jiu Hua Xu, J. B. Lu, Yu Can Fu, Bing Xiao, and Hong Jun Xu. "Brazed CBN Grinding Wheel with Ag-Base Filler Alloy." Materials Science Forum 471-472 (December 2004): 11–15. http://dx.doi.org/10.4028/www.scientific.net/msf.471-472.11.
Повний текст джерелаNosenko, V. A., V. E. Puzyrkova, N. D. Serdyukov, and D. S. Sleptsov. "THE INFLUENCE OF THE MEDIUM ON THE INDICATORS OF THE GRINDING OF STEELS AND TITANIUM ALLOYS WITH A TOOL FROM CORUNDUM AND SILICON CARBIDE." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 8(255) (August 31, 2021): 34–37. http://dx.doi.org/10.35211/1990-5297-2021-8-255-34-37.
Повний текст джерелаKartikasari, Ratna, Adi Subardi, and Andy Erwin Wijaya. "Development of Fe-5Al-1C alloys for grinding ball." Eastern-European Journal of Enterprise Technologies 1, no. 12 (109) (February 26, 2021): 29–35. http://dx.doi.org/10.15587/1729-4061.2021.225421.
Повний текст джерелаGolabczak, Andrzej, Marcin Golabczak, Andrzej Konstantynowicz, Robert Swiecik, and Marcin Galant. "Modeling and Experimental Investigations of the Surface Layer Temperature of Titanium Alloys during AEDG Processing." Defect and Diffusion Forum 365 (July 2015): 63–70. http://dx.doi.org/10.4028/www.scientific.net/ddf.365.63.
Повний текст джерелаLiao, Yunn Shiuan, Y. P. Yu, and C. H. Chang. "Effects of Cutting Fluid with Nano Particles on the Grinding of Titanium Alloys." Advanced Materials Research 126-128 (August 2010): 353–58. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.353.
Повний текст джерелаXiao, Guijian, Kangkang Song, Huawei Zhou, Yi He, and Wentao Dai. "A multi-particle abrasive model for investigation of residual stress in belt grinding of titanium alloys." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 235, no. 11 (April 9, 2021): 1739–50. http://dx.doi.org/10.1177/09544054211007985.
Повний текст джерелаHuo, Wen Guo, Jiu Hua Xu, and Yu Can Fu. "The Finite Element Analysis of Surface Temperature on Dry Belt Grinding for Titanium Alloys." Advanced Materials Research 53-54 (July 2008): 219–24. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.219.
Повний текст джерелаQian, Ning, Zhengcai Zhao, Yucan Fu, Jiuhua Xu, and Jiajia Chen. "Numerical Analysis on Temperature Field of Grinding Ti-6Al-4V Titanium Alloy by Oscillating Heat Pipe Grinding Wheel." Metals 10, no. 5 (May 21, 2020): 670. http://dx.doi.org/10.3390/met10050670.
Повний текст джерелаYin, Liu, Gong Ya-dong, Zhang Huan, Sun Yao, and Cai Ming. "Experimental investigations into grinding characteristics of high entropy alloys (HEAs) using micro grinding." International Journal of Advanced Manufacturing Technology 96, no. 9-12 (March 26, 2018): 4477–99. http://dx.doi.org/10.1007/s00170-018-1726-2.
Повний текст джерелаDidyk, R. P., and O. M. Cherkashchenko. "Revivification of the Hard Alloys by Shock Waves." Advanced Engineering Forum 14 (October 2015): 19–22. http://dx.doi.org/10.4028/www.scientific.net/aef.14.19.
Повний текст джерелаAnanda Kumar, Eriki, K. Prahalada Rao, and A. Johnrajan. "LN2 Grinding of Ti 6Al-4V Using Novel Bondless Diamond Grinding Wheel." Applied Mechanics and Materials 754-755 (April 2015): 812–16. http://dx.doi.org/10.4028/www.scientific.net/amm.754-755.812.
Повний текст джерелаChen, Changhao, Bin Chen, Chaoqun Wu, Xinghua Gu, Xuehai Liu, and Feng Guo. "Theoretical Analysis of Grinding Wheel Deflection Angle on Peripheral Grinding Parameters and Grinding Force." Metals 12, no. 7 (July 17, 2022): 1209. http://dx.doi.org/10.3390/met12071209.
Повний текст джерелаKumar, Anil, B. Vinith, Aditya Kumar Choudhary, and Manoj Kumar Chopkar. "Synthesis and Characterization of Novel High Entropy Alloys." Materials Science Forum 978 (February 2020): 167–73. http://dx.doi.org/10.4028/www.scientific.net/msf.978.167.
Повний текст джерелаLajmert, Paweł, Wojciech Stachurski, and Bogdan Kruszyński. "Effects of grinding conditions on the course of plunge grinding process of titanium alloys on cylindrical grinding machine." Mechanik, no. 12 (December 2015): 982/34–982/37. http://dx.doi.org/10.17814/mechanik.2015.12.595.
Повний текст джерелаZhao, Hong, Ke Wen, Tianjian Lei, Yinan Xiao, and Yang Pan. "Automatic Aluminum Alloy Surface Grinding Trajectory Planning of Industrial Robot Based on Weld Seam Recognition and Positioning." Actuators 12, no. 4 (April 12, 2023): 170. http://dx.doi.org/10.3390/act12040170.
Повний текст джерелаRakhimyanov, Kharis, and Valentina Marusina. "Perspectives of the industrial recycling of hard-alloy materials waste by electro-erosive grinding." MATEC Web of Conferences 224 (2018): 01010. http://dx.doi.org/10.1051/matecconf/201822401010.
Повний текст джерелаUrbaniak, Mirosław, Ryszard Dębkowski, Marcin Gołąbczak, and Marcin Skowron. "Device of magnesium alloy grinding using periodic cleaning of the active surface of grinding wheel during machining." Mechanik 91, no. 11 (November 12, 2018): 1023–25. http://dx.doi.org/10.17814/mechanik.2018.11.182.
Повний текст джерелаJiang, Guiyun, Zeyong Zhao, Guijian Xiao, Shaochuan Li, Benqiang Chen, Xiaoqin Zhuo, and Jie Zhang. "Study of Surface Integrity of Titanium Alloy (TC4) by Belt Grinding to Achieve the Same Surface Roughness Range." Micromachines 13, no. 11 (November 11, 2022): 1950. http://dx.doi.org/10.3390/mi13111950.
Повний текст джерела