Добірка наукової літератури з теми "Grinding -Alloys"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Grinding -Alloys".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Grinding -Alloys"
Niu, Qiu Lin, Guo Giang Guo, Xiao Jiang Cai, Zhi Qiang Liu, and Ming Chen. "Analysis of Specific Energy of TC18 and TA19 Titanium Alloys in Surface Grinding." Advanced Materials Research 325 (August 2011): 147–52. http://dx.doi.org/10.4028/www.scientific.net/amr.325.147.
Повний текст джерелаZhang, Hong Xia, Wu Yi Chen, Xiu Zhuo Fu, and Li Xia Huang. "Grinding Characteristics and Mechanism of Ceramic Alumina Wheels on Aeronautical Alloys." Advanced Materials Research 591-593 (November 2012): 373–76. http://dx.doi.org/10.4028/www.scientific.net/amr.591-593.373.
Повний текст джерелаЛосев, Е., E. Losev, В. Попов, V. Popov, Д. Лобанов, D. Lobanov, П. Архипов, P. Arkhipov, А. Янюшкин, and A. Yanyushkin. "Surface quality of tungstenfree hard alloys after diamond machining." Science intensive technologies in mechanical engineering 1, no. 1 (January 31, 2016): 20–24. http://dx.doi.org/10.12737/17318.
Повний текст джерелаNosenko, Vladimir A., S. V. Nosenko, and V. E. Puzirkova. "Grinding of Titanium Alloys." Key Engineering Materials 887 (May 2021): 287–93. http://dx.doi.org/10.4028/www.scientific.net/kem.887.287.
Повний текст джерелаTakahashi, Masatoshi, Masafumi Kikuchi, and Yukyo Takada. "Grindability of Ti−Nb−Cu Alloys for Dental Machining Applications." Metals 12, no. 5 (May 18, 2022): 861. http://dx.doi.org/10.3390/met12050861.
Повний текст джерелаShi, Zhong De, and Helmi Attia. "Feasibility Study on Grinding of Titanium Alloys with Electroplated CBN Wheels." Advanced Materials Research 797 (September 2013): 73–78. http://dx.doi.org/10.4028/www.scientific.net/amr.797.73.
Повний текст джерелаSyreyshchikova, Nelli Vladimirovna, Viktor Ivanovich Guzeev, Dmitrii Valerievich Ardashev, Danil Yurievich Pimenov, Karali Patra, Wojciech Kapłonek, and Krzysztof Nadolny. "A Study on the Machinability of Steels and Alloys to Develop Recommendations for Setting Tool Performance Characteristics and Belt Grinding Modes." Materials 13, no. 18 (September 8, 2020): 3978. http://dx.doi.org/10.3390/ma13183978.
Повний текст джерелаOkuyama, Shigeki, Akinori Yui, and Takayuki Kitajima. "Grinding Performance of a Grain-Arranged Diamond Wheel against Aluminum Alloys and Ti6Al4V." Advanced Materials Research 126-128 (August 2010): 107–12. http://dx.doi.org/10.4028/www.scientific.net/amr.126-128.107.
Повний текст джерелаSyreyshchikova, Nelli Vladimirovna, Danil Yurievich Pimenov, Munish Kumar Gupta, Krzysztof Nadolny, Khaled Giasin, and Shubham Sharma. "Establishing the Relationship between Cutting Speed and Output Parameters in Belt Grinding on Steels, Aluminum and Nickel Alloys: Development of Recommendations." Materials 14, no. 8 (April 15, 2021): 1974. http://dx.doi.org/10.3390/ma14081974.
Повний текст джерелаTao, Yi Yi, Jiu Hua Xu, and Wen Feng Ding. "A Study on Grinding Performance of Porous NiTi Shape Memory Alloy." Key Engineering Materials 359-360 (November 2007): 143–47. http://dx.doi.org/10.4028/www.scientific.net/kem.359-360.143.
Повний текст джерелаДисертації з теми "Grinding -Alloys"
Wang, S. H. "Investigation into the grinding of titanium alloys." Thesis, Cranfield University, 2000. http://dspace.lib.cranfield.ac.uk/handle/1826/10569.
Повний текст джерелаSetti, Dinesh. "Performance improvement in grinding of Ti-6Al-4V alloy and modeling of surface roughness." Thesis, IIT Delhi, 2016. http://localhost:8080/iit/handle/2074/7069.
Повний текст джерелаShiue, Ren-Kae. "Active braze alloys for metal single layer grinding technology." Thesis, Massachusetts Institute of Technology, 1996. http://hdl.handle.net/1721.1/86277.
Повний текст джерелаVita. Cataloged from PDF version of thesis.
Includes bibliographical references (pages 144-153).
Components made of high-performance ceramics or superalloys are subject to strict requirements with regard to their geometric and dimensional accuracy. The surface finish and edge zone characteristics have a large effect on the component's performance. These requirements can not be met directly by the sintering process used in the manufacture of ceramic materials or traditional casting of superalloys. Grinding is both technically and economically the number one choice when one has to consider machining these materials. Metal Single Layer (MSL) grinding technology provides an alternative way to make use of the superabrasives, diamond and CBN, in grinding these materials. One of the primary challenges in MSL grinding technology is to develop suitable active braze alloy(s) which can bond the superabrasive grits. Ticusil (Ag-Cu eutectic+4.5 wt% Ti) and 70Cu-21Sn- 9Ti (wt%) are two of the currently used active braze alloys. The primary failure mode of these two MSL wheels in the grinding test is transverse fracture and debonding of the diamond grits. The high applied load is responsible for transverse fracture of the diamond grit, and the intermetallic phase existing at the interface between the diamond and the braze alloy is one of the causes of the debonding of the diamond grits. Also, a finite element analysis shows that most of the residual thermal stresses and the thermal mismatch strains are localized at the diamond/braze alloy interface. This results in potential weakness of this area. Moreover, the inherent defects, such as voids, and the brittle intermetallics in the interface can cause crack initiation and propagation. Both deteriorate the life of the grinding wheel. The failure of the braze alloy can be divided into two categories. If the grinding process is very abrasive, such as green concrete grinding, the wear resistance of the braze dominates the fracture of the braze alloy. On the other hand, failure of the braze alloy can also result from cracks at the interface. In such a case, the fatigue resistance of the braze alloy plays an important role in determining the wheel's life. The wear resistance of the braze alloy can be improved by introducing suitable hard particles. It was found that a braze alloy of 77Cu-23Sn-12.5Ti-7.5Zr-10TiC-0.2C (by weight) exhibits excellent performance in a wear test (a ten fold improvement), which is further confirmed in the grinding test (a two fold increase in life). The fatigue resistance of the active braze alloy can be modified by either reducing the volume fraction of the brittle intermetallic phase in the braze and/or enhancing the ductility of the braze alloy matrix. A ductile active braze alloy can be achieved by combining the two-layer structure and two step brazing process. To aid dissolution and diffusion of the Cu atoms into the Cu/Sn/Ti braze alloy, a lower volume fraction of the intermetallic phase and higher ductile matrix of the braze can be achieved. Both have beneficial effects in modifying the ductility of the active braze alloy, and make removal of the braze alloy from the substrate by acid etching easier.
by Ren-Kae Shiue.
Ph. D.
Fursdon, P. M. T. "The continuous dress creep feed form grinding of titanium alloys." Thesis, University of Bristol, 1989. http://hdl.handle.net/1983/5e6c03d3-5847-415b-9967-65eac98f156e.
Повний текст джерелаDzebo, Sead. "Investigation of methods to improve process performance in centerless grinding of Inconel 718 and Ti-6Al-4V superalloys." Thesis, Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/37113.
Повний текст джерелаBhaduri, Debajyoti. "Ultrasonic assisted creep feed grinding and dressing of advanced aerospace alloys." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5415/.
Повний текст джерелаRayner, Joshua Lee. "A finite element simulation of thermal profiles in grinding of titanium aluminide." Thesis, Georgia Institute of Technology, 2000. http://hdl.handle.net/1853/18967.
Повний текст джерелаWojtewicz, Michał. "Research on the influence of grinding wheel impregnation with anti-adhesive substances on the efficiency of nickel based alloys grinding process : PhD thesis summary." Rozprawa doktorska, [s.n.], 2017. http://dlibra.tu.koszalin.pl/Content/1049.
Повний текст джерелаShajari, S., and R. Sarraf-Mamoory. "The Effect of Raw Materials Molar Ratio in Mechanochemical Synthesis of Amorphous Fe-B Alloy Nanoparticles." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34897.
Повний текст джерелаZhao, Zhijun. "Role of surface active layers on localized breakdown of aluminum alloy 7075." Columbus, Ohio : Ohio State University, 2006. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1160670830.
Повний текст джерелаКниги з теми "Grinding -Alloys"
Isaacson, A. E. Effect of sulfide minerals on ferrous alloy grinding media corrosion. Washington, D.C: U.S. Dept. of the Interior, Bureau of Mines, 1989.
Знайти повний текст джерелаIsaacson, A. E. Effect of sulfide minerals on ferrous alloy grinding media corrosion. Washington, DC: Dept. of the Interior, 1989.
Знайти повний текст джерелаRedden, L. D. Hydrometallurgical recovery of critical metals from hardface alloy grinding waste: A laboratory study. Washington, DC: Dept. of the Interior, 1988.
Знайти повний текст джерелаRedden, L. D. Hydrometallurgical recovery of critical metals from hardface alloy grinding waste: A laboratory study. Pittsburgh, PA: U.S. Dept. of the Interior, Bureau of Mines, 1988.
Знайти повний текст джерелаRakhit, A. K. Heat Treatment of Gears. ASM International, 2000. http://dx.doi.org/10.31399/asm.tb.htgpge.9781627083478.
Повний текст джерелаParrish, Geoffrey. Carburizing. ASM International, 1999. http://dx.doi.org/10.31399/asm.tb.cmp.9781627083379.
Повний текст джерелаЧастини книг з теми "Grinding -Alloys"
Jackson, Mark J., Micheal D. Whitfield, Grant M. Robinson, Rodney G. Handy, and Jonathan S. Morrell. "Grinding of Uranium and Uranium Alloys." In Uranium Processing and Properties, 95–121. New York, NY: Springer New York, 2013. http://dx.doi.org/10.1007/978-1-4614-7591-0_4.
Повний текст джерелаRudnev, Aleksandr, Yuriy Gutsalenko, Elena Sevidova, Larisa Pupan, and Oksana Titarenko. "Diamond Spark Grinding of Hard Alloys Using Solid Lubricants." In Lecture Notes in Mechanical Engineering, 114–22. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-77719-7_12.
Повний текст джерелаIbrahim, Elsiddig Eldaw, Heisum Ewad, Xun Chen, and Andre D. L. Batako. "Grinding of Titanium Alloys (Ti-6Al-4V) Using Vibration Assisted Machining." In Advances in Manufacturing Processes, Intelligent Methods and Systems in Production Engineering, 86–94. Cham: Springer International Publishing, 2022. http://dx.doi.org/10.1007/978-3-030-90532-3_7.
Повний текст джерелаKunimine, Takahiro, Motoko Yamada, Hisashi Sato, and Yoshimi Watanabe. "Fabrication of Aluminum Alloy-Based Diamond Grinding Wheel by the Centrifugal Mixed-Powder Method for Novel Machining Technology of CFRP." In ICAA13: 13th International Conference on Aluminum Alloys, 189–94. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118495292.ch29.
Повний текст джерелаPhi, Hung Trong, Got Van Hoang, Tam Ngoc Bui, Trung Kien Nguyen, and Son Hoanh Truong. "The Effect of Microstructure on the Cutting Forces and Microhardness in the Surface Grinding of Titanium Alloys." In Proceedings of the 2nd Annual International Conference on Material, Machines and Methods for Sustainable Development (MMMS2020), 525–33. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-69610-8_72.
Повний текст джерелаKunitsyn, Maksym, Anatoly Usov, and Yulia Sikirash. "Impact of the Heterogeneous Structure of Magnetic Hard Alloys on the Quality Characteristics of the Surface Layer During Grinding Processing." In Lecture Notes in Mechanical Engineering, 405–14. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-91327-4_40.
Повний текст джерелаYang, Chang Yong, Jiu Hua Xu, Wen Feng Ding, and Sheng Ting Tong. "Grinding Titanium Alloy with Brazed Monolayer CBN Wheels." In Advances in Grinding and Abrasive Technology XIV, 33–37. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.33.
Повний текст джерелаTao, Yi Yi, Jiu Hua Xu, and Wen Feng Ding. "A Study on Grinding Performance of Porous NiTi Shape Memory Alloy." In Advances in Grinding and Abrasive Technology XIV, 143–47. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.143.
Повний текст джерелаYang, Zhi Bo, Jiu Hua Xu, Yu Can Fu, and Hong Jun Xu. "Laser Brazing of Diamond Grits with a Ni-Based Brazing Alloy." In Advances in Grinding and Abrasive Technology XIV, 43–47. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-459-6.43.
Повний текст джерелаHuang, Yun, Z. Huang, Q. S. Xu, and W. Zhou. "The Grinding Force Measure and Analysis on the Abrasive Belt Grinding to Magnesium Alloy." In Key Engineering Materials, 726–29. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-456-1.726.
Повний текст джерелаТези доповідей конференцій з теми "Grinding -Alloys"
Pavel, Radu, Xiqun Wang, and Anil K. Srivastava. "Multi-Constraint Optimization for Grinding Nickel-Based Alloys." In ASME 2013 International Manufacturing Science and Engineering Conference collocated with the 41st North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/msec2013-1205.
Повний текст джерелаDias Monteiro, Felipe, Carlos Ventura, Armando Ítalo Sette Antonialli, and Edson Bruno Lara Rosa. "Grinding customized carbides for thread turning of titanium alloys." In 26th International Congress of Mechanical Engineering. ABCM, 2021. http://dx.doi.org/10.26678/abcm.cobem2021.cob2021-1692.
Повний текст джерелаJackson, Mark J., and Xun Chen. "Reducing Wear of Abrasive Wheels Grinding Aerospace Alloys by Laser Assisted Cleaning." In World Tribology Congress III. ASMEDC, 2005. http://dx.doi.org/10.1115/wtc2005-63923.
Повний текст джерелаStoimenov, Nikolay, Dimitar Karastoyanov, Milena Groueva, Bogomil Popov, and Nikola Sabotinkov. "Robotized High-Temperature Technology Producing Materials and Alloys for Grinding Media." In 2018 5th International Conference on Mathematics and Computers in Sciences and Industry (MCSI). IEEE, 2018. http://dx.doi.org/10.1109/mcsi.2018.00018.
Повний текст джерелаYoussef, Sawsen, Olivier Calonne, and Hédi Hamdi. "Influence of Hand Disc Grinding on Surface Integrity of Nickel-Based Alloys: Numerical Approach." In ASME 2013 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/pvp2013-97974.
Повний текст джерелаShen, Nanyan, Yakai Jia, and Jing Li. "Surface roughness of titanium alloys TA2 and TC4 in high-speed cylindrical grinding." In 2013 International Conference on Advanced Materials and Information Technology Processing. Southampton, UK: WIT Press, 2014. http://dx.doi.org/10.2495/amitp130261.
Повний текст джерелаPavel, Radu, and Anil K. Srivastava. "Investigations for Safe Grinding of Ti-6Al-4V Parts Produced by Direct Metal Laser Sintering (DMLS) Technology." In ASME 2014 International Manufacturing Science and Engineering Conference collocated with the JSME 2014 International Conference on Materials and Processing and the 42nd North American Manufacturing Research Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/msec2014-4130.
Повний текст джерелаМакаренко, Константин, Konstantin Makarenko, Сергей Кузовов, Sergey Kuzovov, Александр Никитин, and Alexander Nikitin. "Visualization of the Phase Volume Distribution in Alloys." In 29th International Conference on Computer Graphics, Image Processing and Computer Vision, Visualization Systems and the Virtual Environment GraphiCon'2019. Bryansk State Technical University, 2019. http://dx.doi.org/10.30987/graphicon-2019-2-236-239.
Повний текст джерелаChuri, N. J., Z. C. Li, Z. J. Pei, and C. Treadwell. "Rotary Ultrasonic Machining of Titanium Alloy: A Feasibility Study." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80254.
Повний текст джерелаScruggs, D. M. "The Tribology of Amorphous Surfaces Formed by Wear of Thermal Spray Coatings." In ITSC 1998, edited by Christian Coddet. ASM International, 1998. http://dx.doi.org/10.31399/asm.cp.itsc1998p0249.
Повний текст джерела