Статті в журналах з теми "Green Cutting Fluid"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Green Cutting Fluid".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Li, Yun Chao, Yu Hua Zhang, and Bo Sun. "High Speed Dry Cutting Technology Applications in Production." Applied Mechanics and Materials 190-191 (July 2012): 93–96. http://dx.doi.org/10.4028/www.scientific.net/amm.190-191.93.
Повний текст джерелаJiang, Zhi Gang, Hua Zhang, and Xiao Luo. "Study on the Cutting Technology Based on Green Manufacturing." Key Engineering Materials 375-376 (March 2008): 158–62. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.158.
Повний текст джерела., Jagadish. "GREEN CUTTING FLUID SELECTION USING MOOSRA METHOD." International Journal of Research in Engineering and Technology 03, no. 15 (May 25, 2014): 559–63. http://dx.doi.org/10.15623/ijret.2014.0315105.
Повний текст джерелаWu, C., and Xiao Ming Jia. "Study on Preparation and Properties of Environment-Friendly Cutting Fluid." Key Engineering Materials 392-394 (October 2008): 172–76. http://dx.doi.org/10.4028/www.scientific.net/kem.392-394.172.
Повний текст джерелаWu, Chao, Xiu Ling Zhang, and Xiao Ming Jia. "Study on Green Design and Biodegradability of B-Containing Water-Based Cutting Fluid." Key Engineering Materials 407-408 (February 2009): 309–12. http://dx.doi.org/10.4028/www.scientific.net/kem.407-408.309.
Повний текст джерелаZhang, Ju Lie, and P. N. Rao. "Green/Sustainable Manufacturing — Evaluation of a Soybean-Based Metal Cutting Fluid in Turning Operation." Applied Mechanics and Materials 392 (September 2013): 925–30. http://dx.doi.org/10.4028/www.scientific.net/amm.392.925.
Повний текст джерелаZhong, Wei Wu, Dong Biao Zhao, Xi Wang, and Hui Yu. "Adaptive Fuzzy Control of Cutting Temperature Based on Cutting Fluid in High-Speed Machining." Advanced Materials Research 97-101 (March 2010): 2381–86. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.2381.
Повний текст джерелаKatna, Rahul, Kanwarjeet Singh, Narayan Agrawal, and Swati Jain. "Green manufacturing—performance of a biodegradable cutting fluid." Materials and Manufacturing Processes 32, no. 13 (May 10, 2017): 1522–27. http://dx.doi.org/10.1080/10426914.2017.1328119.
Повний текст джерелаNi, Jing, Kai Feng, Lihua He, Xiaofan Liu, and Zhen Meng. "Assessment of water-based cutting fluids with green additives in broaching." Friction 8, no. 6 (October 2, 2019): 1051–62. http://dx.doi.org/10.1007/s40544-019-0318-y.
Повний текст джерелаLee, T. S., C. F. How, Y. J. Lin, and T. O. Ting. "An investigation of organic mixed coolant (Palm Olein) for green machining." Industrial Lubrication and Tribology 66, no. 2 (March 4, 2014): 194–201. http://dx.doi.org/10.1108/ilt-11-2011-0088.
Повний текст джерелаGhuge, Nilesh C., and Dattaraya D. Palande. "The Emergence of MQL with vegetable oil as a green manufacturing technique: A Review." SAMRIDDHI : A Journal of Physical Sciences, Engineering and Technology 14, no. 01 (March 25, 2022): 66–71. http://dx.doi.org/10.18090/samriddhi.v14i01.11.
Повний текст джерелаGandhi, Mohd Asif I. "Review on Performance Evaluation of Machining Characteristics using Vegetable-based Cutting Fluids – An approach towards Green Manufacturing." Psychology and Education Journal 58, no. 2 (February 20, 2021): 6358–65. http://dx.doi.org/10.17762/pae.v58i2.3160.
Повний текст джерелаGajrani, Kishor Kumar, P. S. Suvin, Satish Vasu Kailas, and Mamilla Ravi Sankar. "Hard machining performance of indigenously developed green cutting fluid using flood cooling and minimum quantity cutting fluid." Journal of Cleaner Production 206 (January 2019): 108–23. http://dx.doi.org/10.1016/j.jclepro.2018.09.178.
Повний текст джерелаS. Ghosh, M. C. Mandal, K. Das, N. Mondal, and A. Ray. "Optimization of Cutting parameters of AISI 1018 Low Carbon Mild steel in turning using green cutting fluid by Taguchi Method." Journal of Mechanical Engineering: Prakash 01, no. 01 (2022): 62–67. http://dx.doi.org/10.56697/jmep.2022.1108.
Повний текст джерелаLee, T. S., and H. B. Choong. "An Investigation on Green Machining: Cutting Process Characteristics of Organic Metalworking Fluid." Advanced Materials Research 230-232 (May 2011): 809–13. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.809.
Повний текст джерелаJagadish and A. Ray. "Green Cutting Fluid Selection using Multi-attribute Decision Making Approach." Journal of The Institution of Engineers (India): Series C 96, no. 1 (July 23, 2014): 35–39. http://dx.doi.org/10.1007/s40032-014-0126-0.
Повний текст джерелаSingh, Aswani K., and Varun Sharma. "Thermo-physical and tribological characteristics of ionic liquid-based rice bran oil as green cutting fluid." Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology 236, no. 6 (October 21, 2021): 1091–112. http://dx.doi.org/10.1177/13506501211046154.
Повний текст джерелаWang, Lin, Da Zhi Wang, and Sheng Han. "Application Research of Biodegradable Base Oil in the Green Metal Cutting Fluid." Advanced Materials Research 641-642 (January 2013): 619–24. http://dx.doi.org/10.4028/www.scientific.net/amr.641-642.619.
Повний текст джерелаTriyono, Dedi Priadi, Eddy S. Siradj, and Winarto. "Surface Modification of SKD 61 by Electrical Discharge Coating (EDM/EDC) with Multilayer Rectangular Cross-Section Electrode and Jatropha curcas as Dielectric Fluid." Advanced Materials Research 1083 (January 2015): 69–74. http://dx.doi.org/10.4028/www.scientific.net/amr.1083.69.
Повний текст джерелаWu, Shenghong, Li Yu, and Chenlei Zhao. "Effect of Cooling Parameters on Cutting Vibration of Milling GH4169." Academic Journal of Science and Technology 3, no. 3 (November 21, 2022): 171–74. http://dx.doi.org/10.54097/ajst.v3i3.2931.
Повний текст джерелаGuan, Jiju, Chao Gao, Zhengya Xu, Lanyu Yang, and Shuiquan Huang. "Lubrication Mechanisms of a Nanocutting Fluid with Carbon Nanotubes and Sulfurized Isobutylene (CNTs@T321) Composites as Additives." Lubricants 10, no. 8 (August 19, 2022): 189. http://dx.doi.org/10.3390/lubricants10080189.
Повний текст джерелаWang, Hui, Rong Di Han, and Yang Wang. "Tool Wear Investigation on Dry Electrostatic Cooling in Turning Titanium Alloy Ti6Al4V." Advanced Materials Research 97-101 (March 2010): 2058–61. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.2058.
Повний текст джерелаChandrakant, Sheth Pushpak, and Bhaveshkumar K. Patel. "A Review on the Effect of Minimum Quantity Lubrication on Different Machining Parameters Emphasizing Vegetable Oil-Based Lubricants for Sustainable Manufacturing." Advanced Materials Research 1175 (February 20, 2023): 107–22. http://dx.doi.org/10.4028/p-325298.
Повний текст джерелаSamykano, Mahendran, J. Kananathan, K. Kadirgama, A. K. Amirruddin, D. Ramasamy, and L. Samylingam. "Characterisation, Performance and Optimisation of Nanocellulose Metalworking Fluid (MWF) for Green Machining Process." International Journal of Automotive and Mechanical Engineering 18, no. 4 (December 21, 2021): 9188–207. http://dx.doi.org/10.15282/ijame.18.4.2021.04.0707.
Повний текст джерелаGupta, Munish Kumar, and PK Sood. "Machining comparison of aerospace materials considering minimum quantity cutting fluid: A clean and green approach." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 8 (December 13, 2016): 1445–64. http://dx.doi.org/10.1177/0954406216684158.
Повний текст джерелаPei, Hong Jie, Y. J. Shen, Chun Gen Shen, and Gui Cheng Wang. "Application of Castor Oil-Based Cutting Fluids in Precision Turning." Applied Mechanics and Materials 130-134 (October 2011): 3830–34. http://dx.doi.org/10.4028/www.scientific.net/amm.130-134.3830.
Повний текст джерелаHan, R. D., Jun Yan Liu, Y. Zhang, and L. Zhang. "Experimental Study on Green Cutting with Water Vapor as Coolant and Lubricant." Key Engineering Materials 315-316 (July 2006): 45–50. http://dx.doi.org/10.4028/www.scientific.net/kem.315-316.45.
Повний текст джерелаHan, Rong Di, Yue Zhang, Yang Wang, Guo Fan Cao, and Jie Liu. "The Effect of Superheated Water Vapor as Coolant and Lubricant on Chip Formation of Difficult-to-Cut Materials in Green Cutting." Key Engineering Materials 375-376 (March 2008): 172–76. http://dx.doi.org/10.4028/www.scientific.net/kem.375-376.172.
Повний текст джерелаFarooqi, Awais, and Nukman bin Yusoff. "Green Manufacturing - Textured Novel Cutting Tool for Sustainable Machining: A Review." Applied Mechanics and Materials 899 (June 2020): 135–43. http://dx.doi.org/10.4028/www.scientific.net/amm.899.135.
Повний текст джерелаKatna, Rahul, M. Suhaib, Narayan Agrawal, Kanwarjeet Singh, Swati Jain, and S. Maji. "Green Machining: Studying the impact of viscosity of Green Cutting fluid on surface quality in straight turning." Journal of Physics: Conference Series 1276 (August 2019): 012036. http://dx.doi.org/10.1088/1742-6596/1276/1/012036.
Повний текст джерелаBag, Sayan, and Avash Kumar Saha. "A review on environmental friendly cutting fluids and coolant delivery techniques in grinding." Proceeding International Conference on Religion, Science and Education 1 (February 22, 2022): 627–32. http://dx.doi.org/10.14421/icrse.v1.2022.846.
Повний текст джерелаLiu, Wei. "Influence of Nano-Cutting Fluid in New Cutting and Forming Processes on Heat Transfer Performance of Mechanical Engineering." International Journal of Analytical Chemistry 2022 (June 30, 2022): 1–7. http://dx.doi.org/10.1155/2022/5603355.
Повний текст джерелаChen, Xing Yun, and Jing Zi Wei. "Research of Machinery Production Technique Based on Green Manufacturing." Applied Mechanics and Materials 484-485 (January 2014): 235–38. http://dx.doi.org/10.4028/www.scientific.net/amm.484-485.235.
Повний текст джерелаGajrani, Kishor Kumar, P. S. Suvin, Satish Vasu Kailas, K. P. Rajurkar, and Mamilla Ravi Sankar. "Machining of hard materials using textured tool with minimum quantity nano-green cutting fluid." CIRP Journal of Manufacturing Science and Technology 35 (November 2021): 410–21. http://dx.doi.org/10.1016/j.cirpj.2021.06.018.
Повний текст джерелаABIYARI, HOOMAN, and MOHAMMAD MAHDI ABOOTORABI. "THE EFFECTS OF NOZZLE NUMBER AND OUTLET GEOMETRY ON GRINDING PROCESS WITH MINIMUM QUANTITY COOLING (MQC) BY NANOFLUID." Surface Review and Letters 28, no. 07 (April 28, 2021): 2150058. http://dx.doi.org/10.1142/s0218625x2150058x.
Повний текст джерелаMakhesana, Mayurkumar Ashwinbhai, and Kaushik M. Patel. "Investigation to study the applicability of solid lubricants in machining for clean and green manufacturing." Industrial Lubrication and Tribology 68, no. 5 (August 8, 2016): 591–96. http://dx.doi.org/10.1108/ilt-03-2015-0037.
Повний текст джерелаTazehkandi, Ahmadreza Hosseini, Mohammadreza Shabgard, Farid Pilehvarian, and Nakisa Farshfroush. "Experimental investigations of cutting parameters’ influence on cutting forces and surface roughness in turning of Inconel alloy X-750 with biodegradable vegetable oil." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 231, no. 9 (September 3, 2015): 1516–27. http://dx.doi.org/10.1177/0954405415599914.
Повний текст джерелаLi, Chang He, Ya Li Hou, Shi Chao Xiu, and Guang Qi Cai. "Application of Lubrication Theory to Near-Dry Green Grinding – Feasibility Analysis." Advanced Materials Research 44-46 (June 2008): 135–42. http://dx.doi.org/10.4028/www.scientific.net/amr.44-46.135.
Повний текст джерелаSankaranarayanan, R., N. Rajesh Jesudoss Hynes, J. Senthil Kumar, and J. Angela Jennifa Sujana. "Random decision forest based sustainable green machining using Citrullus lanatus extract as bio-cutting fluid." Journal of Manufacturing Processes 68 (August 2021): 1814–23. http://dx.doi.org/10.1016/j.jmapro.2021.07.014.
Повний текст джерелаSomarajan, Suvin Parayantayyathu, and Satish Vasu Kailas. "Study and Comparison of Lubricity of Green and Commercial Cutting Fluid Using Tool-Chip Tribometer." Tribology Online 13, no. 6 (December 31, 2018): 340–50. http://dx.doi.org/10.2474/trol.13.340.
Повний текст джерелаZhao, H. B., and Y. F. Nan. "Experimental Research on the System Performance in Near-Dry Deep Hole Drilling." Key Engineering Materials 455 (December 2010): 98–102. http://dx.doi.org/10.4028/www.scientific.net/kem.455.98.
Повний текст джерелаZhang, Ming Xing, Hai Yan Chen, and Cui Ping Yan. "Technical Parameter Research of High Purity Green SiC from Cutting Waste Mortar of Solar Silicon Wafer." Advanced Materials Research 129-131 (August 2010): 1043–48. http://dx.doi.org/10.4028/www.scientific.net/amr.129-131.1043.
Повний текст джерелаTan, X. C., F. Liu, H. J. Cao, and H. Zhang. "A decision-making framework model of cutting fluid selection for green manufacturing and a case study." Journal of Materials Processing Technology 129, no. 1-3 (October 2002): 467–70. http://dx.doi.org/10.1016/s0924-0136(02)00614-3.
Повний текст джерелаLiu, Jun Yan, Rong Di Han, and Yang Wang. "The Investigations of Tool Wear and Wear Mechanism with Water Vapor as Coolants and Lubricants in Green Cutting." Applied Mechanics and Materials 10-12 (December 2007): 913–17. http://dx.doi.org/10.4028/www.scientific.net/amm.10-12.913.
Повний текст джерелаDong, Pham Quang, Tran Minh Duc, Ngo Minh Tuan, Tran The Long, Dang Van Thanh, and Nguyen Van Truong. "Improvement in the Hard Milling of AISI D2 Steel under the MQCL Condition Using Emulsion-Dispersed MoS2 Nanosheets." Lubricants 8, no. 6 (June 5, 2020): 62. http://dx.doi.org/10.3390/lubricants8060062.
Повний текст джерелаWajiha Tasnim Urmi, Md Mustafizur Rahman, Wahaizad Safiei, Kumaran Kadirgama, and Md Abdul Maleque. "Effects of Minimum Quantity Lubrication Technique in Different Machining Processes - A Comprehensive Review." Journal of Advanced Research in Fluid Mechanics and Thermal Sciences 90, no. 2 (January 18, 2022): 135–59. http://dx.doi.org/10.37934/arfmts.90.2.135159.
Повний текст джерелаShan, Hou. "Modification and performance evaluation of Konjac gum in drilling fluid." Journal of Physics: Conference Series 2430, no. 1 (February 1, 2023): 012014. http://dx.doi.org/10.1088/1742-6596/2430/1/012014.
Повний текст джерелаSingh, Aswani Kumar, and Varun Sharma. "A comparative appraisal of sustainable strategy in Ultrasonic Assisted Grinding of Nimonic 80A using novel green atomized cutting fluid." Sustainable Materials and Technologies 32 (July 2022): e00423. http://dx.doi.org/10.1016/j.susmat.2022.e00423.
Повний текст джерелаPaturi, Uma Maheshwera Reddy, G. Naveen Kumar, and V. S. Vamshi. "Silver nanoparticle-based Tween 80 green cutting fluid (AgNP-GCF) assisted MQL machining - An attempt towards eco-friendly machining." Cleaner Engineering and Technology 1 (December 2020): 100025. http://dx.doi.org/10.1016/j.clet.2020.100025.
Повний текст джерелаZhao, Chenyu, Shengjie Wu, and Min Lai. "Ultra-precision machining of cerium-lanthanum alloy with atmosphere control in an auxiliary device." Nanotechnology and Precision Engineering 5, no. 3 (September 1, 2022): 033004. http://dx.doi.org/10.1063/10.0013777.
Повний текст джерела