Дисертації з теми "Gravimetrics"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Gravimetrics".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Purpurovič, Janina. "Antrosios klasės gravimetrinių matavimų analizė." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2012. http://vddb.laba.lt/obj/LT-eLABa-0001:E.02~2012~D_20120723_102357-23012.
Повний текст джерелаThesis carried out in Lithuania and Poland, the gravimetric analysis of the network.Reviewed in IGSN 71gravity system of transmission methods, examined the accuracy of gravimetric networks. The information on the latest automatic gravimeter Scintrex CG-5, made second-class Lithuanian gravimetric network of methodology on a detailed analysis. Done gravimetric measurement database that can be used for gravimetric measurement data analysis. Using a second-class gravimeters gravimetric network Scintrex CG-5 data, perform, acceleration of gravity accuracy dependence on the number of measurements point out. We obtain the results can be used to improve measurement gravimeters Scintrex CG -5 methodology. The work consists of six parts: introduction, four sections, conclusions and the list of literature. Working volume - 98 pages, 56 drawings, 25 tables. The list of literature includes 28 bibliographical sources.
Cavalheiro, Mara Lia Dias. "Levantamento gravimétrico na Jazida Carbonífera Morungava-Chico Lomã, RS." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2016. http://hdl.handle.net/10183/150209.
Повний текст джерелаThe present dissertation was developed according to standard 103 of the Graduate Program in Geosciences of the Federal University of Rio Grande do Sul, which provides for the submission of the dissertation in the form of article, predates by state of the art proposed theme. In the southeastern region of the Paraná Basin are located economically important coal deposits in the states of Parana, Santa Catarina and Rio Grande do Sul. These deposits are often much altered by volcanic intrusions. The objective of this study is to map the igneous intrusions affecting the thermal change of level of coal (rank) of the coal deposit Morungava-Chico Lomã in RS. The coal deposit Morungava-Chico Lomã was discovered in the last century and has never been mining. It is characterized by organic rocks of the Permian, coal and bituminous shale, in the southern portion of the Paraná Basin. The gravimetric acquisition was carried in área of the deposit Morungava and in the area of the deposit Chico-Lomã. For both areas the choice of acquisition locations was based on previously conducted drilling holes. With data from the holes drilling were prepared these thematic maps: depth of the first occurrence of coal; cumulative thickness of coal; depth of the first occurrence of diabase; cumulative thickness of diabase; cumulative thickness of diabase in Irati Formation and cumulative thickness of the diabase in Rio Bonito Formation. In the elaboration of article submitted the overriding of the isolines of cumulative thickness of coal and diabase in the filtered Bouguer anomaly maps was performed. These overrides presented correlations and assisted in the interpretation of gravity data. The predominant preferential orientation of the anomalies was NE-SW and a subsidiary orientation NW-SE direction, suggesting a structural control on the occurrence of dikes and/or sills, on gravimetric high. In Chico Lomã the occurrence of an extensive positive Bouguer anomaly forming a trend of NE-SW orientation was correlated with geological units of Rio Grande do Sul Coastal Plain: gravimetric characterized the high Barrier I and low gravimetric, Systems Lagunar I and II. The gravimetric method proved efficient for the characterization of the deposit through the correlation of positive gravity anomalies with occurrences of diabase.
Bergamaschi, Jonathan Melo. "Ataque acido a argamassa de cimento comum e com escoria : um estudo cinetico e gravimetrico de degradação." [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/250454.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica
Made available in DSpace on 2018-08-08T20:35:59Z (GMT). No. of bitstreams: 1 Bergamaschi_JonathanMelo_M.pdf: 1286873 bytes, checksum: d69d1c5af13c8dd142484b9abdf4423f (MD5) Previous issue date: 2007
Resumo: Este trabalho descreve o comportamento degradativo de ataque ácido em argamassas preparadas com dois tipos de cimento com escória (compostos) e um sem escória (comum) analisado via gravimetria e pela velocidade de ataque. Os fatores como período de cura, concentração do ácido e tipo (ácido clorídrico, HCl, sulfúrico, H2SO4, e ácido acético, HAc) foram controlados. Nos ensaios de ataque ácido analisados por gravimetria, o ácido sulfúrico se comportou o mais agressivo em todos os tipos de cimento estudados. Porém em ensaios com corpos de prova de CP-III, nas primeiras semanas de imersão neste ácido, houve um aumento de massa. Após esse período a perda de massa foi intensa, devido o agravante do ataque por íons sulfatos. A velocidade de degradação da argamassa é influenciada fortemente pela natureza do ácido. O ácido orgânico é o consumido mais rapidamente. Contudo, para argamassa de cimento composto, a velocidade de consumo de ácido é menor em baixa concentração. HCl ataca mais rapidamente argamassa curada por 28 dias do que H2SO4 em concentração 0,010 mol L. O efeito do tempo de cura mostra diferença de velocidade ao ataque ácido entre HCl e H2SO4; com corpos de prova curados por 7 dias, HCl é mais rapidamente consumido, mas em corpos de prova curados por 91 dias, H2SO4 é consumido mais rápido. A análise de imagens superficiais dos corpos de prova em ensaios utilizando soluções de mesmo pH confirma a proporcionalidade direta entre a força do ácido e a agressividade. Diferente comportamento é também observado para argamassa preparada com diferentes cimentos. Para períodos curtos de cura, cimento composto apresenta baixa velocidade de ataque. No entanto, quando imersos em ácido acético, argamassa de cimento tipo CP-V apresenta baixa velocidade de ataque em períodos longos de cura, quando comparado com cimento com escória. Estes resultados mostram que muitos fatores estudados influenciam na velocidade do ataque ácido e estes restringem as generalizações sobre a resistência dos cimentos.
Abstract: This work describes the degradative behaves of acid attack in mortars prepared with two slag containing cements and one without slag analyzed by gravimetria and kinetic. Conditioning factors as curing period, acid concentration and type (hydrochloric acid, HCl, sulfuric acid, H2SO4, and acetic acid, HAc) were controlled. In experiments of acid attack analyzed by gravimetria, sulfuric acid behaved the most aggressive in all studied types of cement. However in experiments with CP-III specimens, in the first weeks of immersion in sulfuric acid, it had a mass increase. After this period, the loss of mass was intense, due the aggravating of the attack for sulfate. The nature of the acid influences strongly mortar degradation rates. The organic acid is the quickest consumed. However, for slag-mortars, the rate of acid consumption is lower in less concentrated solutions. HCl attacks faster all 28-days cured mortars than H2SO4 in 0.10 mol L solutions. The effect of curing time shows differences among HCl and H2SO4 attack rate; with 7-day cured specimens, HCl is more rapidly consumed, but with 91-day cured specimens, H2SO4 is the fastest consumed. The analysis of superficial images of specimens in experiments using same pH solutions confirms the direct proportionality between the force of acid and its aggressiveness. Different behavior is also observed for mortars prepared with different cements. For short curing times, slag-cement mortars show lower rate of attack. However, when immersed in acetic acid (HAc), type III cement mortars show lower rates of attack at longer curing times, when compared to slag-cement mortars. These results show that every factor studied influenced the rate of acid attack and this restrains cement resistance generalizations.
Mestrado
Físico-Química
Mestre em Química
Brandão, Sirlaine Diniz Ferreira. "Influência da funcionalização com grupos contendo oxigênio na dispersão de nanotubos de carbono de parede única em solventes do tipo amida." CNEN - Centro de Desenvolvimento da Tecnologia Nuclear, Belo Horizonte, 2010. http://www.bdtd.cdtn.br//tde_busca/arquivo.php?codArquivo=256.
Повний текст джерелаDesde que as singulares propriedades mecânicas e condutoras dos nanotubos de carbono (NCs) estão associadas a tubos individuais isolados, a dispersão e estabilização de seus feixes em diferentes líquidos são de extrema importância em estudos fundamentais e aplicados. Solventes do tipo amida são atualmente considerados os melhores candidatos, dentre os solventes orgânicos, à dispersão quantitativa dos feixes de nanotubos, sendo que a funcionalização das paredes dos tubos favorece essa dispersão em determinados meios. Amostras brutas de nanotubos de carbono são compostas por feixes contendo até centenas de tubos com distribuição em diâmetro, comprimento, quiralidade e caráter eletrônico, unidos por interações de van der Waals. Para a dispersão desses feixes, o potencial atrativo entre os tubos deve ser balanceado por um potencial repulsivo. Assim, o custo energético das interações nanotubosolvente, que depende fortemente da composição química da superfície dos tubos e das propriedades dielétricas do meio, precisa ser entendido. Teorias de solubilidade têm sido recentemente aplicadas no entendimento dos sistemas nanotubo-solvente. Nelas, a dispersão é favorecida quando os parâmetros de solubilidade do soluto e do solvente têm valores próximos. Nos parâmetros de Hansen, contribuições de energias dispersivas (dd), dipolares (dp) e de ligação de hidrogênio (dh) são consideradas nas interações intermoleculares. O parâmetro de Flory-Huggins (χ) estima a diferença de interação entre o soluto e o solvente, podendo ser expresso em termos dos parâmetros de Hansen. Neste trabalho, apresentamos um estudo sistemático da dispersão de nanotubos de carbono de parede única, como preparados e funcionalizados com grupos ácidos contendo oxigênio, em solventes do tipo amida. As interações nanotubos-solvente foram analisadas em termos dos parâmetros de solubilidade de Hansen e de Flory-Huggins. Por refluxo em solução de HNO3 diluída, quantidades similares (~ 0,3 mmol/g C) de grupos ácidos carboxílicos e hidroxílicos foram covalentemente introduzidos à superfície dos tubos, sem criar defeitos adicionais ou destruir tubos de diâmetros menores. Os materiais de partida e funcionalizado foram amplamente caracterizados por termogravimetria, microscopia eletrônica de varredura e transmissão, titulação potenciométrica e espectroscopias por dispersão de energia, Raman, na região do infravermelho e de fotoelétrons excitados por raios X. As dispersões obtidas por sonificação/centrifugação dos NCs, antes e após funcionalização, em N-metilpirrolidona (NMP), N,N-dimetilformamida (DMF), N,N-dimetilacetamida (DMA), Ndodecilpirrolidona (N12P) e ciclohexilpirrolidona (CHP) foram caracterizadas por espectroscopia de absorção óptica na região do ultravioleta-visível (UV-Vis). Em estudo de absorbância em função da concentração, foram estimados os limites de dispersão e os coeficientes de absorção dos nanotubos de carbono em cada solvente. A presença dos grupos funcionais aumentou a dispersabilidade dos tubos em NMP, DMF e DMA, mas diminuiu em N12P e CHP. Os coeficientes de absorção, entretanto, diminuíram para todos os solventes após oxidação, refletindo a diminuição da probabilidade da transição p-p* com a funcionalização e a interação com o solvente. Os parâmetros de solubilidade de Hansen e de interação de Flory-Huggins foram calculados para as amostras antes e após funcionalização, permitindo uma análise termodinamicamente quantitativa das interações intermoleculares nos sistemas estudados. Os valores dos parâmetros de Hansen obtidos para a amostra bruta foram dD = 18,0 MPa1/2, dP = 7,4 MPa1/2 e dH = 6,8 MPa1/2, enquanto aqueles para a amostra funcionalizada foram dD = 17,4 MPa1/2, dP = 12,0 MPa1/2 e dH = 9,2 MPa1/2. Em comparação com valores tabelados para os solventes, o parâmetro de energia dispersiva mostrou-se dominante na dispersão dos tubos não-funcionalizados, enquanto interações dipolares e ligações de hidrogênio exerceram uma maior influência na dispersão dos tubos funcionalizados com grupos oxigenados ácidos. Os parâmetros de interação de Flory-Huggins estimados mostraram que os sistemas com maior afinidade foram a amostra bruta dispersa no solvente CHP e a amostra funcionalizada dispersa nos solventes NMP, DMA e DMF.
Cunha, Ildenize B. S. "Manipulação gravimetrica automatica de soluções." [s.n.], 1994. http://repositorio.unicamp.br/jspui/handle/REPOSIP/249959.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Instituto de Quimica
Made available in DSpace on 2018-07-19T09:32:16Z (GMT). No. of bitstreams: 1 Cunha_IldenizeB.S_D.pdf: 5906129 bytes, checksum: 0f1152ff9ea91e411c561d088124cbfb (MD5) Previous issue date: 1994
Doutorado
Conti, Alberto. "Revamping di macchina dosatore gravimetrico." Bachelor's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/5019/.
Повний текст джерелаStenvold, Torkjell. "Offshore Gravimetric and Subsidence Monitoring." Doctoral thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for petroleumsteknologi og anvendt geofysikk, 2008. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-5269.
Повний текст джерелаGellerstedt, Jennifer, and Simon Westman. "Sambandet mellan radarsignaler och fukthalt i en lättbetongkonstruktion." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-24203.
Повний текст джерелаMoisture in buildings is common and can lead to damage. The moisture can cause moldand rot, which is not good for human health. The moisture can also affect different properties of the building materials such as strength, thermal insulation and dimensional changes. Because high moisture levels can have a major impact on the materials, it is important to detect and fix the problem at an early stage. The purpose and aim of this report is to see if there is a correlation between radar and moisture content and determine whether radar technology is a useful method of measuring moisture contentin a building element. In this work, literature studies, measurements and analyzes have been made. The material used is lightweight concrete that is built up to four walls in two different thicknesses, two large and two small walls. The large test-walls were used for radar measurements and the small ones as sample-walls for the gravimetric method. The walls were built in a tent where relative humidity (RF) and temperature could be controlled. At the beginning of the experiment, the RF in the tent was set to 98-99 % and the temperature of 22 °C, which was then regulated to dry out the walls. Measurements have been made with radar and the gravimetric method in parallel, where the latter was made by weighing the sample-walls light concrete blocks at the same time as the radar measurements. The blocks of the sample walls were then dried in an oven at 105 °C to determine drydensity. The collected data from the radar measurements have been processed by the Radarbolaget’s personnel. The results for the different methods have then been analyzed and compared to see if there is a relationship. The results from the study show that there is a connection between moisture content and the signals from the radar measurements. The moisture content can be determined on a light concrete wall with a margin of error of ± 4 kgH20/m3material, which corresponds to about 4 %. It is possible to get a good result with radar measurement. However, the method is complicated, but there may be value for further studies on multilayered structures to determine whether the technology can be useful for existing building constructions.
Waskow, Régis Pereira. "ASTM D5231 aplicada à caracterização da composição gravimétrica dos resíduos sólidos urbanos : estudo de caso : Novo Hamburgo, RS." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/115271.
Повний текст джерелаThe purpose of this paper is evaluate the gravimetric composition of Municipal Solid Waste (MSW) of Novo Hamburgo - RS. Ten samples were collected in different areas between March to April 2014 according to ASTM D5231/2008. Simultaneously were evaluated the MSW density and the materials collection after sorting followed the ASTM D5231/2008. The gravimetric composition of MSW consists in 57,13% of organic matter; 14,82% of plastic; 12,69% of paper; 4,34% of textile; 1,62% of ferrous metals; 0,69% of rubber; 0,49% of noun ferrous metals; 0,40% of leather; 0,35% of wood and 3,86% of others. The MSW density were 173 kg/m³. Some residues as electronics, batteries, oil contaminated packaging and some industrial solid waste should not be disposed as MSW. A larger fraction of organic matter was expected as shown in the most Brazilian analyzed papers since that behavior is known about the gravimetric average composition of MSW in Brazil. The results demonstrate the potential implementation of the composting process considering the amount of organics, requiring further analysis to ensure the quality and applicability of the produced compounds. The inappropriate disposal of organic matter and recyclables together turn unfeasible the recycling. The gravimetric composition of material after sorting consists in: 81,60% of organic matter; 8,63% of plastic; 2,89% of paper; 1,66 of textile; 0,58% of rubber; 0,52% of ferrous metals; 0,37% of non ferrous metals; 0,35% of wood; 0,23% of leather e 1,81% of others. Amounts of recyclables was identified after sorting and based on this evidence actions were proposed to increase the sorting process efficiency and improve the recycling. Public policies were recommended to enhance the MSW management. The results are representative considering this measuring period, which could change if realized in another periods.
Rossi, Tatiana. "indagine gravimetrica su antica strada romana." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2019.
Знайти повний текст джерелаMöhringer, Sandra [Verfasser]. "Decorrelation of Gravimetric Data / Sandra Möhringer." München : Verlag Dr. Hut, 2014. http://d-nb.info/1052375421/34.
Повний текст джерелаBell, Stephanie A. "Validation of the NPL gravimetric hygrometer." Thesis, City University London, 1995. http://openaccess.city.ac.uk/7703/.
Повний текст джерелаMohamoud, Mohamoud Abdirahman. "Gravimetric and viscoelastic investigation of electroactive films." Thesis, University of Leicester, 2007. http://hdl.handle.net/2381/9941.
Повний текст джерелаDanila, Uliana. "Mold2012 : a new gravimetric quasigeoid model over Moldova." Licentiate thesis, KTH, Geodesi och geoinformatik, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-105755.
Повний текст джерелаQC 20121127
French, Heidi Marie. "Gravimetric and optical studies of electroactive film dynamics." Thesis, University of Leicester, 2002. http://hdl.handle.net/2381/30065.
Повний текст джерелаVajda, Peter. "The truncated geoid and the gravimetric inverse problem." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1995. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/NQ46304.pdf.
Повний текст джерелаAbrehdary, Majid. "Recovering Moho parameters using gravimetric and seismic data." Doctoral thesis, KTH, Geodesi och satellitpositionering, 2016. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-183577.
Повний текст джерелаQC 20160317
Pessoa, Luciano Montenegro da Cunha. "Geoide gravimetrico local em area da Bacia do Parana." reponame:Repositório Institucional da UFPR, 1997. http://hdl.handle.net/1884/49683.
Повний текст джерелаDissertação (mestrado) - Universidade Federal do Paraná
Resumo: O presente trabalho apresenta um modelo geoidal de âmbito local para a região definida geograficamente pelos paralelos - 24° 30' e - 26° 30' e meridianos - 50° 30' e - 52° 30' inserida na bacia sedimentar do Paraná, resultante da combinação de dados gravimétricos com o modelo do geopotencial OSU91A e de um modelo topográfico de alta resolução. A formulação matemática utilizada para a obtenção das ondulações geoidais foi a integral de Stokes, através da técnica remove-restore com modificação da função S(y/) para a aproximação plana. Esta técnica possibilita explorar a alta correlação existente entre as anomalias ar-livre e a topografia, bem como a baixa correlação entre as anomalias Bouguer com esta mesma topografia. A existência de um modelo topográfico de alta resolução para área trabalhada foi condição necessária para a aplicação da técnica, tendo este sido gerado a partir da digitalização contínua das curvas de nível das cartas topográficas existentes nas escalas de 1: 100.000 (14 folhas) e 1: 50.000 (8 folhas). Na combinação dos elementos acima, o modelo OSU91A, truncado em grau e ordem 180, foi responsável pela quantificação da componente dè longo comprimento de onda da representação espectral do campo gravífico, enquanto coube às anomalias gravimétricas e ao modelo topográfico digital quantificarem respectivamente os efeitos de médio e curto comprimentos de onda do campo sobre as ondulações geoidais. Foram considerados os efeitos indiretos sobre o potencial gravífico resultantes das reduções efetuadas, bem como as influências do relevo nas medidas gravimétricas nas zonas próxima e distante das 5.125 estações gravimétricas. Foi analisada e quantificada a correlação entre as anomalias Bouguer e a topografia na área de trabalho, e, seguindo modelo proposto Pick (1973), apresentado um modelo de densidades para a área. As ondulações geoidais resultantes foram comparadas com os correspondentes valores obtidos a partir do posicionamento GPS de um conjunto de 31 RRNN da rede altimétrica fundamental brasileira, às quais foram interligadas à Rede Nacional GPS. O modelo resultante apresentou uma componente sistemática de 0,38 m tendo como referências a diferença entre as alturas elipsoidais fornecidas por Pereira (1993) e as altitudes ortométricas das RRNN, enquanto que a propagação relativa apresentou diferenças da ordem de 3,5 ppm. Nas avaliações absolutas e relativas foi utilizada a metodologia proposta por Pessoa (1994).
Abstract: This paper presents a local geoidal model for a geographicaly defined region between paralels - 24° 30' and - 26° 30' and meridians - 50° 30' e - 52° 30', inserted in the Paraná sedimentary basin, resulting from a combination of gravimetric data, a geopotenctial model OSU91A and a high resolution topographic model. The Stokes integral was utilized as mathematical formulation to obtain geoidal undulation through remove-restore technique, using a modified S(y/) function in its plane aproach. This technique allows to explore high correlation existing between free-air anomalies and topography, as well the low correlation between Bouguer anomalies with topography. As necessary condition for use this aproach, a high resolution topographic model for that area was generated from digitizing all level lines of existing topographical maps in 1: 100.000 (14 sheets) and 1: 50.000 (8 sheets). In such combination of elements, the OSU91A model, truncated in degree and order 180, was responsible for quantifying spectral representation field long wavelenght component, while gravimetric anomalies and topographic model were responsable for quantifying medium and short wavelenght effects over geoidal undulations. Resulting indirects effects over potential were also considered as well topographic effects on observations in near and distant zones for 5.125 gravimetric stations. Correlation between Bouguer anomalies and topography was quantified for the area and, using model sugested by Pick (1973), to compute a density model. Resulting geoidal undulations were compared with corresponding values obtained from GPS positioning over 31 benchmarks of the fundamental height brazilian network, whose were tied to Rede Nacional GPS. Resulting model presented a sistematic component of 0,38 m refered to differences between elipsoidal heights from Pereira (1993) and orthometric heights of benchmarks, while relative propagation showed differences of about 3,5 ppm. In absolute and relative evaluation a methodology proposed by Pessoa (1994) was used.
Olsen, Adam Paul Flagan Richard C. Kornfield Julia A. "Scanning activity gravimetric analysis (SAGA) of aqueous polyethylene oxide /." Diss., Pasadena, Calif. : Caltech, 2006. http://resolver.caltech.edu/CaltechETD:etd-05262006-133416.
Повний текст джерелаGoyal, Ropesh. "Towards a Gravimetric Geoid Model for the Mainland India." Thesis, Curtin University, 2022. http://hdl.handle.net/20.500.11937/89060.
Повний текст джерелаGagg, Gilberto. "Auscultação gravimetrica na região da barragem Bento Munhoz da Rocha." reponame:Repositório Institucional da UFPR, 1997. http://hdl.handle.net/1884/36636.
Повний текст джерелаDissertação(mestrado) - Universidade Federal do Paraná
Resumo: Na região da Barragem de Bento Munhoz da Rocha - PR, foram realizadas medidas gravimétricas antes e apos o enchimento do reservatório, visando-se detectar variações de g que possam ser indícios de subsidência. Foram empregados testes estatísticos para a interpretação dos resultados, pois a variação da gravidade foi da mesma ordem de grandeza que os erros observacionais. Os resultados foram confrontados com dados anteriormente disponíveis de nivelamento geométrico também efetuado na região.
Abstract: At the region of the "Bento Munhoz da Rocha - PR"’ dam, was developed gravimetric measurements before and after the reservoir filling, in order to detect gravity variations that could be indication of subsidence. Statistical tests were used to interpret the results, because the gravity variation was of the same magnitude as the observational errors. The results was compared with others results of geometric levelling previously available that also was developed at the region.
Amarante, Rogério Rodrigues 1972. "Sistematização do processamento de dados gravimétricos aplicados a determinação do modelo geoidal." [s.n.], 2012. http://repositorio.unicamp.br/jspui/handle/REPOSIP/258364.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Civil, Arquitetura e Urbanismo
Made available in DSpace on 2018-08-21T16:53:48Z (GMT). No. of bitstreams: 1 Amarante_RogerioRodrigues_D.pdf: 8479306 bytes, checksum: c6760b22f8c1f110ad1b61e48c59508b (MD5) Previous issue date: 2012
Resumo: Com o uso de métodos adequados, receptores GNSS podem determinar coordenadas com acurácia suficiente para aplicação em projetos de engenharia. Porém a altitude elipsoidal obtida não utiliza o mesmo sistema de referência da engenharia de transportes. A altitude elipsoidal pode ser transformada em ortométrica com a utilização de modelos geoidais que são gerados a partir de dados gravimétricos. Neste trabalho são apresentados alguns conceitos introdutórios sobre a geração de modelo geoidais. Em seguida mostra o desenvolvimento de uma nova sistematização do tratamento de dados gravimétricos com objetivo de facilitar a detecção de erros, aumentar a produtividade e melhorar a organização de resultados obtidos. Dentro deste desenvolvimento, são revisadas as teorias utilizadas para transformar medições feitas com gravímetros diferenciais em aceleração da gravidade. Apresenta também técnicas de ajustamento de observações com intuito tratar erros aleatórios. A nova abordagem sugerida foi utilizada para o desenvolvimento de um software objetivando validar as idéias propostas, permitir a comparação com outras soluções existentes e também servir como uma contribuição tecnológica. Dados gravimétricos reais foram testados dentro da abordagem proposta tendo sido observados mais organização, ganho de produtividade e principalmente a detecção de erros grosseiros e aleatórios. Com a revisão do cálculo da correção da maré, percebeu-se que programas e equipamentos atualmente em uso não possuem configuração do fator gravimétrico, fato que pode influenciar em até 0; 007mGals no processamento das observações
Abstract: With the use of appropriate methods, GNSS receivers can determine coordinates with sufficient accuracy for use in projects. The ellipsoidal height obtained, however, does not use the same reference system as the one used in transportation engineering. The ellipsoidal height can be transformed to orthometric height using geoid models that are generated from gravimetric data. In this work some introductory concepts on the generation of geoid model are presented. Then it shows the development of a new approach in systematization of gravimetric data processing aiming to facilitate the detection of errors, increase productivity and improve the organization of the results obtained in the gravimetric surveys. Within this development, the theories used to convert measurements of the differences in gravity acceleration are revised. It also features adjustment techniques of observations in order to deal with random errors. The new suggested approach was used to develop software in order to validate the proposed ideas, allow comparison with other existing solutions, and also serves as a technological contribution. Gravimetric data were tested within the suggested approach. It was observed better organization, productivity gains and mainly detection of gross errors and random. With the review of the tide correction calculation, it was realized that programs and equipments now widely used have no gravimetric factor setting, a fact that can influence up to 0; 007mGals in processing the readings
Doutorado
Transportes
Doutor em Engenharia Civil
Wan, Mohd Akib Wan Abdul Aziz. "A preliminary determination of a gravimetric geoid in Peninsular Malaysia." Thesis, University College London (University of London), 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.283665.
Повний текст джерелаNyamangunda, Patrick. "Towards a 10cm local gravimetric geoid for Zimbabwe using FFT." Thesis, University College London (University of London), 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.301119.
Повний текст джерелаFehrenbach, Antonia, Heinz Fehrenbach, Thorsten Wittwer, Matthias Ochs, Thorsten Wahlers, and Joachim Richter. "Evaluation of Pulmonary Edema: Stereological versus Gravimetrical Analysis." Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2014. http://nbn-resolving.de/urn:nbn:de:bsz:14-qucosa-132491.
Повний текст джерелаDieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich
Fehrenbach, Antonia, Heinz Fehrenbach, Thorsten Wittwer, Matthias Ochs, Thorsten Wahlers, and Joachim Richter. "Evaluation of Pulmonary Edema: Stereological versus Gravimetrical Analysis." Karger, 2001. https://tud.qucosa.de/id/qucosa%3A27457.
Повний текст джерелаDieser Beitrag ist mit Zustimmung des Rechteinhabers aufgrund einer (DFG-geförderten) Allianz- bzw. Nationallizenz frei zugänglich.
Bitalová, Katarína. "Gravimetrická měření a opakovaná nivelace na polygonu Tetčice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2014. http://www.nusl.cz/ntk/nusl-227127.
Повний текст джерелаZajíčková, Katarína. "Gravimetrická měření a opakovaná nivelace na polygonu Tetčice." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2017. http://www.nusl.cz/ntk/nusl-390234.
Повний текст джерелаSchwab, Silvia Helena Soares 1957. "Mares gravimetricas, influencias ambientais e calibração instrumental : estudos na estação Curitiba." reponame:Repositório Institucional da UFPR, 1999. http://hdl.handle.net/1884/43830.
Повний текст джерелаCo-orientador: Wladimir Shukowsky
Tese (doutorado) - Universidade Federal do Paraná
Resumo: A aquisição de dados de maré gravimétrica consiste em colocar o instrumento em aquisição de dados em uma estação, onde interferem algumas variáveis físicas tais como a resposta local a variação dos parâmetros de ambiente e o efeito indireto dos oceanos. Dentre as possíveis abordagens do problema, propõe-se a determinação das admitâncias e função de transferência entre as grandezas físicas envolvidas no processo. Para isto, e necessário que os dados resultantes da analise de maré sejam concordantes com os parâmetros de maré historicamente conhecidos para a estação. A sua adequação pode ser feita mediante uma calibração dinâmica do gravimetro, em relação aos valores de referencia. Este processo de calibração, assim como a determinação das admiâancias entre os parâmetros de ambiente e o efeito do carregamento oceânico em relação as maré gravimétricas, são fundamentais para a melhor aplicação dos gravimetros de mola, em vista da resolução exigida na atualidade na observação de mares. A metodologia de estudo aqui proposta, aplicada a dados obtidos pelo gravimetro GEO 783 na estação fundamental de Curitiba, Brasil (ICET-7305), pode também ser estendido para as operações normais de observação das mares gravimétricas em novas estações, possibilitando o refinamento das analises gravimétricas, desde que amostrados adequadamente os parâmetros do ambiente de aquisição. Cada influencia e considerada como um canal, de maneira a estudar as suas admitâncias com o canal gravimétrico, de forma independente. Desta forma, o estudo visa discriminar, em caráter local, a parcela de contribuição de cada um dos canais, através do seu modelamento, do estudo das suas correlações no domínio do tempo e principalmente através da construção das suas funções de transferência, em amplitude e fase, no domínio das frequências via analise espectral. Os experimentos realizados foram baseados em dados-minuto gravimétricos obtidos durante sete meses no ano de 1995, aliados a dados de pressão, temperatura e umidade do ar obtidos através de captores, com a mesma taxa de amostragem, devidamente calibrados com a utilização de instrumentos-padrão. Para a avaliação da adequação das correções instrumentais adotadas para o GEO 783, foi realizada uma comparação com os valores de referencia dos parâmetros de maré na estação, que indicou a necessidade de realizar a calibração dinâmica. Nesta, a partir do nível dos resíduos obtidos após a analise de maré, foram considerados como elemento discriminador para a avaliação da calibração, os valores de carregamento oceânico calculados para a estação, pela utilização do modelo de Schwiderski tradicionalmente adotado, e dos novos modelos introduzidos a partir de 1992, via altimetria por satélite TOPEX/POSEIDON. Com este procedimento, os valores resultantes da serie foram adequados para posterior estudos de influencias entre os canais. Com este fim, foram então estudadas as correlações entre os canais de pressão, temperatura e umidade com o sinal gravimétrico observado, nos dois domínios, do tempo e das frequências. Uma vez caracterizadas as admitâncias entre os canais, evidenciou-se uma forte correlação entre o sinal gravimétrico e a pressão atmosférica, que permitiu mediar valores para as funções de transferência entre estes canais, nas diversas bandas de frequências do espectro de mares.
Abstract: The acquisition of gravimetric tide data consists of placing the instrument on a station under the influence of some physical variables, such as the local response to environmental parameters and the indirect effects of oceans. Among the many possible methods to treat this kind of problem, it is proposed the determination of the admittances and transfer functions among the variables involved in the process. With that purpose, it is necessary that resulting analysed data be in accordance with the historically known tidal parameters of the station. Its adequacy can be verified through a dynamic calibration as function of reference values. This calibration process, as well as the determination of admittances between the environmental parameters and ocean loading related with gravimetric tides, are fundamental for a better use of spring gravity meters, taking into account the required resolution for Earth tides observation. The proposed methodology of study, was applied to data obtained by GE0783 at the Curitiba Fundamental Station (ICET-7305), Brazil. It can be extended to common gravimetric tide observations, performed in new stations. It also allows the improvement of the tidal analysis, because the environmental parameters can be adequately sampled. Each influence is considered as an independent channel, as a way to study their admittances with the gravimetric channel. Thus, the study aims to discriminate, with a local character, the contribution of each channel independently, through its modeling, its correlation in time domain, and mainly, the construction of its transfer functions in both frequency, in magnitude and phase, in frequency domain through spectral analysis. Experiments were carried out using gravimetric minute-sampled data, obtained at Curitiba Station during seven months, in 1995, together with air pressure, temperature and air humidity data, sampled at the same rate, and adequately calibrated to usual units of physics through the use of standard instruments. To estimate the adopted instrumental corrections for GEO 783, the results of tidal anlysis were compared with the reference values of tidal parameters at the station, which indicated the necessity to perform the dynamic calibration. In this last procedure, the discrimination element of the results of the calibration, was considered as being the calculated values for local ocean loading, by means the traditional Schwidersky method, and the news models established by satellite althimetriy, via TOPEX-POSEIDON. Then, the 1995' series was adequated to the influences analysis proposed in this work. The correlation coefficients between the air pressure, temperature and air humidity channels and the observed channel, in two domains, time and frequency were studied. The admittance between the channels was characterized, a significant correlation between the observed signal and air pressure was evident, allowing to focus on their transfer functions in the different frequency bands of the earth tide spectrum.
Mahed, Gaathier. "Analysis of temporal and spatial variations in water storage by means of gravimetric and hydrologic methods in the region around the South African gravimetric observation station." Thesis, Nelson Mandela Metropolitan University, 2013. http://hdl.handle.net/10948/6714.
Повний текст джерелаMoura, Denise Silva de. "Gravimetric and magnetic modelling of the Ceará Plateau, Brazilian Equatorial Margin." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/21/21136/tde-15012019-162208/.
Повний текст джерелаA Margem Equatorial Brasileira é uma margem passiva transformante com longas zonas de fratura e diversos montes submarinos, incluindo o Platô do Ceará, o maior deles. Essa é uma área muito complexa e pouco conhecida, com poucos dados disponíveis. A abordagem geofísica foi utilizada para alcançar uma melhor compreensão da área e para guiar próximas pesquisas. Dados gravimétricos e magnéticos do Projeto Equant I, linhas sísmicas publicadas e estudos prévios foram aplicados para desenvolver os modelos e as análises. A fonte das anomalias gravimétricas e magnéticas pareceram ser as mesmas, relacionadas a um embasamento mais denso e magnetizado. É estimada a superfície do embasamento entre 800 e 6000 m e a descontinuidade de Mohorovičić, aproximadamente a 22-23 km abaixo do Platô do Ceará. Foi também apresentada e discutida a posição do limite crosta continental-oceânica, aproximadamente a 40 km da plataforma continental, colocando o platô na crosta oceânica. A área da crosta transicional, com uma extensão de 40-50 km, demarca uma crosta continental mais alterada, formada durante a fase rifte, anterior à abertura do Oceano Atlântico. A falta de dados limitou as análises, e certamente implicou em diversas incertezas nos resultados, que são discutidas durante esta dissertação.
Lattach, Youssef. "Development and characterization of sensing layers based on molecularly imprinted conducting polymers for the electrochemical and gravimetrical detection of small organic molecules." Phd thesis, Conservatoire national des arts et metiers - CNAM, 2011. http://tel.archives-ouvertes.fr/tel-00699628.
Повний текст джерелаFrancis, Laurent A. "Thin film acoustic waveguides and resonators for gravimetric sensing applications in liquid." Université catholique de Louvain, 2006. http://edoc.bib.ucl.ac.be:81/ETD-db/collection/available/BelnUcetd-01272006-113333/.
Повний текст джерелаNahavandchi, Hossein. "Precise gravimetric-GPS geoid determination with improved topographic corrections applied over Sweden." Doctoral thesis, KTH, Geodesy and Photogrammetry, 1998. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-2726.
Повний текст джерелаBayraktar, Ekrem. "Design And Implementation Of A Mems Based Gravimetric Detector For Cytometry Applications." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612482/index.pdf.
Повний текст джерелаto enable in-flow analysis and to perform closed loop operation that does not require any additional processing or equipment. A novel MEMS based resonator with in-flow capabilities is proposed for detection of agents inside micro channels. High resolution of mass detection inside micro channels is planned to be succeeded with lateral motion in the micro channel floor. The idea embedding lateral resonators emerges from decreasing squeeze film damping during the motion of the resonator. Lateral motion is supported by hydrophobic parylene coating to decrease the damping. Theory and design of the gravimetric resonators are explained and the fabrication flow is constructed and performed successfully by combining SOI, SOG and polymer micro fabrication techniques. Problems during the fabrication are overcome and optimized flow is presented. The devices have a foot print area of 1.5 x 0.5 cm2 which is mainly composed of reservoirs for fluidic connections. Ten types of devices are designed according to their mass sensitivities and compliances. Trade offs between frequency, injected current, and compliance are analyzed successfully by taking also the performance parameters of the interface electronics in to account. Test results reveal that single latex bead with 3 µ
m diameter and 14.127 pg mass can be sensed successfully and mass sensitivity is measured to be 5.91 fg/Hz for this type of device.
Inerbayeva, (Shoganbekova) Daniya. "Determination of a gravimetric geoid model of Kazakhstan using the KTH-method." Thesis, KTH, Geoinformatik och Geodesi, 2010. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-52284.
Повний текст джерелаHsu, Jui-lin. "A study of ink trapping comparing gravimetric and desitometric methods of measurement /." Online version of thesis, 1989. http://hdl.handle.net/1850/11333.
Повний текст джерелаFeatherstone, William Edward. "A G.P.S. controlled gravimetric determination of the geoid of the British Isles." Thesis, University of Oxford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306204.
Повний текст джерелаAbdalla, Ahmed. "Determination of a gravimetric geoid model of Sudan using the KTH method." Thesis, KTH, Geodesi och satellitpositionering, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-199670.
Повний текст джерелаYürekli, Yılmaz Alsoy Altınkaya. "Measurement of transport properties of polyacrylic systems using a gravimetric sorption method/." [s.l.]: [s.n.], 2003. http://library.iyte.edu.tr/tezler/master/kimyamuh/T000274.pdf.
Повний текст джерелаAkhtar, Nahid. "A multiscale harmonic spline interpolation method for the inverse spheroidal gravimetric problem." Aachen Shaker, 2009. http://d-nb.info/1000335380/04.
Повний текст джерелаVičkutė, Asta. "Paprastojo kiečio (Artemisia vulgaris l.) biologinių savybių priklausomybė nuo augavietės edafinių ir klimatinių ypatumų." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2009. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2009~D_20090615_114532-97883.
Повний текст джерелаTopic of the diploma (Master degree in Ecology) was evaluation of Artemisia vulgaris L.) physiological-biochemical parameters depending on site edaphic and climatic factors. Research object - Artemisia vulgaris L. Purpose of the work – evaluation of various morphophysiological-biochemical parameters of Artemisia vulgaris L. in respect of the distance from the nitrogen fertilizer factory, ommiting ammonia also in respect of heavy metal concentrations in the soil. Methods. Analyses were performed at the laboratory of Environment of University of Agriculture of Lithuania. Concentration of nitrogen was determined by Kjeldal method. For the determination of the heavy metal concentration the samples of the soil were burned by „Multiwave 3000 Synthos 3000“ and obtained extracts were analysed following protocol for the soil quality (LST ISO 11047), using method of flame and electrothermal atomic absorbtion spectrometry. The amount of epiphytic microorganisms was determined bacteria on soya agar and fungi on Salsbur medium. Data were analysed using Excel and SPSS statistical packages. Results and discussion. Concentration of the nitrogen in the soil and leaves of Artemisia vulgaris, falls in the following order: site, located in 2 km distance from the factory < site located besides the factory < Kačerginė site located in 45 km distance from the factory (as a control, „relatively clean“ site). In the sampling sites of Artemisia vulgaris concentrations of heavy metal (Pb, Cr, Ni... [to full text]
Daras, IIias. "Determination of a gravimetric geoid model of Greece using the method of KTH." Thesis, KTH, Geodesi och satellitpositionering, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-199682.
Повний текст джерелаMuralidas, Pooja. "Thermo-gravimetric Analysis of Corrosion Kinetics of Ti and Zr Coated P91 Steel." OpenSIUC, 2016. https://opensiuc.lib.siu.edu/theses/2057.
Повний текст джерелаJacob, Thomas. "APPORT DE LA GRAVIMETRIE ET DE L'INCLINOMETRIE A L'HYDROLOGIE KARSTIQUE." Phd thesis, Université Montpellier II - Sciences et Techniques du Languedoc, 2009. http://tel.archives-ouvertes.fr/tel-00404851.
Повний текст джерелаKratochvíl, Richard. "Určení průběhu kvazigeoidu na profilu Velká Bíteš - Uherské Hradiště." Master's thesis, Vysoké učení technické v Brně. Fakulta stavební, 2013. http://www.nusl.cz/ntk/nusl-226472.
Повний текст джерелаWong, Simon Chi-hon. "The effects of locus of control on the computer-assisted learning of gravimetric stoichiometry." Thesis, University of British Columbia, 1986. http://hdl.handle.net/2429/26631.
Повний текст джерелаEducation, Faculty of
Educational and Counselling Psychology, and Special Education (ECPS), Department of
Graduate
Jackson, Angela. "Electrochemical quartz crystal microbalance studies of electroactive polymer films in gravimetric and viscoelastic regimes." Thesis, University of Leicester, 2001. http://hdl.handle.net/2381/30059.
Повний текст джерелаAkhtar, Nahid [Verfasser]. "A Multiscale Harmonic Spline Interpolation Method for the Inverse Spheroidal Gravimetric Problem / Nahid Akhtar." Aachen : Shaker, 2010. http://d-nb.info/1124365478/34.
Повний текст джерелаSsengendo, Ronald. "A height datum for Uganda based on a gravimetric quasigeoid model and GNSS/levelling." Doctoral thesis, KTH, Geodesi och satellitpositionering, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172547.
Повний текст джерелаQC 20150831