Готові списки джерел за темами / Graphene silver nanocomposite films

Добірка наукової літератури з теми "Graphene silver nanocomposite films"

Автор: Grafiati
Опубліковано: 6 вересня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Graphene silver nanocomposite films".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Graphene silver nanocomposite films"

1

Balakrishnan, Dhivyabharathi, and Cheng-I. Lee. "Surface Functionalization of Bamboo with Silver-Reduced Graphene Oxide Nanosheets to Improve Hydrophobicity and Mold Resistance." Coatings 12, no. 7 (July 11, 2022): 980. http://dx.doi.org/10.3390/coatings12070980.

Повний текст джерела
Анотація:
A natural polyphenolic compound was used to assemble nanocomposites. Owing to its stable bioactive properties, bamboo has earned significant attention in material science. Its high nutrient content and hydrophilicity makes bamboo more vulnerable to mold attacks and shortened shelf lives. To produce efficient, multipurpose, long-life bamboo products, a novel technique involving an immersion dry hydrothermal process was applied to impregnate the bamboo with polyphenol-assisted silver-reduced graphene oxide nanosheets. Curcumin (Cur), a natural polyphenol found in the rhizome of Curcuma longa, was used in the preparation of curcumin-enhanced silver-reduced graphene oxide nanosheets (Cur-AgrGONSs). The nanocomposites and nanocomposite-impregnated bamboo materials were examined by field emission scanning electron microscopy, X-ray diffraction and Fourier transform infrared spectroscopy. At the same time, a phytopathogen was isolated from infected bamboo products and identified by internal transcribed spacer (ITS) sequences. The nanocomposites effectively inhibited the growth of the isolated fungus. The mold resistance and moisture content of both the treated and untreated bamboo timbers were also examined to determine the efficiency of the prepared nanocomposite. The antifungal activity and hydrophobicity of the bamboo materials were significantly enhanced after the incorporation of curcumin-enriched silver-loaded reduced graphene oxide nanosheets (B@Cur-AgrGONSs). This research outcome confirms that the nanocomposite is a well-organized antimicrobial material for different advanced domains.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Cobos, Mónica, Iker De-La-Pinta, Guillermo Quindós, María Jesús Fernández, and María Dolores Fernández. "Synthesis, Physical, Mechanical and Antibacterial Properties of Nanocomposites Based on Poly(vinyl alcohol)/Graphene Oxide–Silver Nanoparticles." Polymers 12, no. 3 (March 24, 2020): 723. http://dx.doi.org/10.3390/polym12030723.

Повний текст джерела
Анотація:
The design of new materials with antimicrobial properties has emerged in response to the need for preventing and controlling the growth of pathogenic microorganisms without the use of antibiotics. In this study, partially reduced graphene oxide decorated with silver nanoparticles (GO–AgNPs) was incorporated as a reinforcing filler with antibacterial properties to poly(vinyl alcohol) (PVA) for preparation of poly(vinyl alcohol)/graphene oxide-silver nanoparticles nanocomposites (PVA/GO–AgNPs). AgNPs, spherical in shape and with an average size of 3.1 nm, were uniformly anchored on the partially reduced GO surface. PVA/GO–AgNPs nanocomposites showed exfoliated structures with improved thermal stability, tensile properties and water resistance compared to neat PVA. The glass transition and crystallization temperatures of the polymer matrix increased with the incorporation of the hybrid. The nanocomposites displayed antibacterial activity against Staphylococcus aureus and Escherichia coli in a filler content- and time-dependent manner. S. aureus showed higher susceptibility to PVA/GO–AgNPs films than E. coli. Inhibitory activity was higher when bacterial cells were in contact with nanocomposite films than when in contact with leachates coming out of the films. GO–AgNPs based PVA nanocomposites could find application as wound dressings for wound healing and infection prevention.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Селиверстова, Е. В., Н. Х. Ибраев та А. Ж. Жумабеков. "Влияние наночастиц серебра на фотодетектирующие свойства нанокомпозита TiO-=SUB=-2-=/SUB=-/оксид графена". Журнал технической физики 128, № 9 (2020): 1337. http://dx.doi.org/10.21883/os.2020.09.49875.135-20.

Повний текст джерела
Анотація:
The effect of silver nanoparticles on the optoelectronic and photoelectric properties of a nanocomposite material based on graphene oxide (GO) and TiO2 was studied. The data of electron microscopy and Raman spectroscopy have shown that, the formation of a TiO2-GO nanocomposite material occurs during hydrothermal synthesis. The absorption spectrum of the nanocomposite is shifted to the long-wavelength region relative to the absorption of TiO2. The current–voltage characteristics of photodetector based on TiO2-GO nanocomposite films were increased by 2 and 7.5 times relative to pure titanium dioxide without and with the addition of Ag nanoparticles, respectively. The optoelectronic parameters of the devices were also increased, which is associated with growth in the mobility of charge carriers in nanocomposite films.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Serikov, T. M., P. A. Zhanbirbayeva, A. S. Baltabekov, and A. B. Kuanyshbekova. "Photocatalytic activity of the TIO2/Ag/rGO nanocomposite." Bulletin of the Karaganda University. "Physics" Series 108, no. 4 (December 30, 2022): 14–21. http://dx.doi.org/10.31489/2022ph4/14-21.

Повний текст джерела
Анотація:
The paper presents the results of a study of the photocatalytic activity of films formed by titanium dioxide nanorods doped with silver nanoparticles and reduced graphene oxide. The obtained nanocomposite materials were studied by optical spectroscopy, scanning electron microscopy, X-ray diffractometry, and Raman spectroscopy. The photocatalytic activity of the samples was evaluated by generating a photocurrent when the surface was illuminated by a modulated light source of a xenon lamp. In addition, the photocatalytic activity of the samples was evaluated by the degradation of the methylene blue dye, which is a model. It was found that the introduction of silver nanoparticles and reduced graphene oxide into the pores of films made of titanium dioxide nanorods leads to an increase in the spectral sensitivity of the sample in the region of 400-500 nm. The increased sensitivity of the sample to visible light leads to an increase in photocurrent generation and is 2.3 times higher than that of the original sample. Degradation of the methylene blue dye after 100 minutes of irradiation in the presence of a TiO2/Ag/rGO sample was 19 %. This is 3 times higher than in TiO2 nanorods films and 2.3 times higher than TiO2/Ag films. The results of the conducted studies have shown that the improvement of photocatalytic activity is associated with a decrease in film resistance, an expansion of spectral sensitivity and an increase in the surface area of the nanorods.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Jiang, Yu, Davide Carboni, Luca Malfatti, and Plinio Innocenzi. "Graphene Oxide-Silver Nanoparticles in Molecularly-Imprinted Hybrid Films Enabling SERS Selective Sensing." Materials 11, no. 9 (September 10, 2018): 1674. http://dx.doi.org/10.3390/ma11091674.

Повний текст джерела
Анотація:
A highly sensitive and selective Raman sensor has been developed by combining molecularly imprinted cavities, silver nanoparticles, and graphene oxide into a hybrid organic-inorganic film. The molecular imprinted nanocomposite material is an advanced platform that exhibits Graphene-mediated Surface-Enhanced Raman Scattering. The sensing layers have been prepared via sol-gel process and imprinted with rhodamine 6G to obtain selective dye recognition. Graphene oxide sheets decorated with silver nanoparticles have been incorporated into the matrix to enhance the Raman scattering signal. The template molecule can be easily removed from the films by ultrasonication in ethanol. A 712-fold Raman enhancement has been observed, which corresponds to a 2.15 × 1013 count·μmol−1 signal enhancement per molecular cavity. Besides Raman enhancement, the sensing platform has shown an excellent selectivity toward the test molecule with respect to similar dyes. In addition, the material can be reused at least 10 times without any loss of performance.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sahu, Ganeswar, Mamata Das, Mithilesh Yadav, Bibhu Prasad Sahoo, and Jasaswini Tripathy. "Dielectric Relaxation Behavior of Silver Nanoparticles and Graphene Oxide Embedded Poly(vinyl alcohol) Nanocomposite Film: An Effect of Ionic Liquid and Temperature." Polymers 12, no. 2 (February 7, 2020): 374. http://dx.doi.org/10.3390/polym12020374.

Повний текст джерела
Анотація:
This paper presents the dielectric characteristics of nanocomposite films of poly(vinyl alcohol) (PVA) embedded with silver (Ag) nanoparticles and graphene oxide(GO). The nanocomposite films were fabricated by using the solvent casting approach. The morphological analysis was carried out through scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The dielectric relaxation behavior of nanocomposite films was analyzed in the frequency range of 101 to 106 Hz, by varying GO loading. The temperature effect was investigated over the temperature range of 40 to 150 °C. The effect of ionic liquid (IL) was also explored by comparing the dielectric behavior of films fabricated without using ionic liquid. The conductive filler loading variation showed a significant effect on dielectric permittivity(ε′), complex impedance (Z*) and electric conductivity (σac). The obtained results revealed that the dielectric permittivity (ε′) increased by incorporating Ag nanoparticles and increasing GO loading in PVA matrix. An incremental trend in dielectric permittivity was observed on increasing the temperature, which is attributed to tunneling and hopping mechanism. With an increase in nanofiller loading, the real part of impedance (Z′) and imaginary part of impedance (Z″) were found to decrease. Further, the semicircular nature of Nyquist plot indicated the decrease in bulk resistivity on increasing GO loading, temperature and incorporating ionic liquid. On the basis of above findings, the obtained GO-Ag-PVA nanocomposite films can find promising applications in charge storage devices.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Liu, Mingyang, Yanjun Chen, Chaoran Qin, Zheng Zhang, Shuai Ma, Xiuru Cai, Xueqian Li, and Yifeng Wang. "Electrodeposition of reduced graphene oxide with chitosan based on the coordination deposition method." Beilstein Journal of Nanotechnology 9 (April 17, 2018): 1200–1210. http://dx.doi.org/10.3762/bjnano.9.111.

Повний текст джерела
Анотація:
The electrodeposition of graphene has drawn considerable attention due to its appealing applications for sensors, supercapacitors and lithium-ion batteries. However, there are still some limitations in the current electrodeposition methods for graphene. Here, we present a novel electrodeposition method for the direct deposition of reduced graphene oxide (rGO) with chitosan. In this method, a 2-hydroxypropyltrimethylammonium chloride-based chitosan-modified rGO material was prepared. This material disperses homogenously in the chitosan solution, forming a deposition solution with good dispersion stability. Subsequently, the modified rGO material was deposited on an electrode through codeposition with chitosan, based on the coordination deposition method. After electrodeposition, the homogeneous, deposited rGO/chitosan films can be generated on copper or silver electrodes or substrates. The electrodeposition method allows for the convenient and controlled creation of rGO/chitosan nanocomposite coatings and films of different shapes and thickness. It also introduces a new method of creating films, as they can be peeled completely from the electrodes. Moreover, this method allows for a rGO/chitosan film to be deposited directly onto an electrode, which can then be used for electrochemical detection.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Sun, Haibin, Guixian Ge, Jiejun Zhu, Hailong Yan, Yang Lu, Yaozheng Wu, Jianguo Wan, Min Han, and Yongsong Luo. "High electrical conductivity of graphene-based transparent conductive films with silver nanocomposites." RSC Advances 5, no. 130 (2015): 108044–49. http://dx.doi.org/10.1039/c5ra24650d.

Повний текст джерела
Анотація:
Polycrystalline graphene films grown by chemical vapor deposition (CVD) possess outstanding electrical and optical properties, which make them alternative materials for applications in transparent conductive films (TCF).
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Sharma, Neha, Sathish Panneer Selvam, and Kyusik Yun. "Electrochemical detection of amikacin sulphate using reduced graphene oxide and silver nanoparticles nanocomposite." Applied Surface Science 512 (May 2020): 145742. http://dx.doi.org/10.1016/j.apsusc.2020.145742.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Carreño, N. L. V., A. M. Barbosa, V. C. Duarte, C. F. Correa, C. Ferrúa, F. Nedel, S. Peralta, et al. "Metal-Carbon Interactions on Reduced Graphene Oxide under Facile Thermal Treatment: Microbiological and Cell Assay." Journal of Nanomaterials 2017 (2017): 1–10. http://dx.doi.org/10.1155/2017/6059540.

Повний текст джерела
Анотація:
Silver-functionalized reduced graphene oxide (Ag-rGO) nanosheets were prepared by single chemical and thermal processes, with very low concentration of silver. The resulting carbon framework consists of reduced graphene oxide (rGO) sheets or 3D networks, decorated with anchored silver nanoparticles. The Ag-rGO nanosheets were dispersed into a polymer matrix and the composites evaluated for use as biological scaffolds. The rGO material in poly(dimethylsiloxane) (PDMS) has been tested for antimicrobial activity against Gram-positiveStaphylococcus aureus(S. Aureus) bacteria, after exposure times of 24 and 120 hours, as well as in the determination of cell viability on cultures of fibroblast cells (NIH/3T3). Using 1 mL of Ag-rGO in PDMS the antibacterial effectiveness againstStaphylococcus aureuswas limited, showing an increased amount of Colony Forming Units (CFU), after 24 hours of contact. In the cell viability assay, after 48 hours of contact, the group of 1 mL of Ag-rGO with PDMS was the only group that increased cell viability when compared to the control group. In this context, it is believed these behaviors are due to the increase in cell adhesion capacity promoted by the rGO. Thus, the Ag-rGO/PDMS hybrid nanocomposite films can be used as scaffolds for tissue engineering, as they limit antimicrobial activity.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Graphene silver nanocomposite films"

1

Stone, D'Arcy S. "Tribological investigation of nanocomposite thin films of transitional metal nitrides with silver inclusions." OpenSIUC, 2011. https://opensiuc.lib.siu.edu/theses/768.

Повний текст джерела
Анотація:
In this tribological study, a temperature dependent inquiry of the changes in chemistry and crystal structure of two selected double metal oxides is undertaken. It is known that chameleon coatings of Mo2N/Ag/MoS2 produce a friction coefficient of 0.1 from wear testing at 600 °C for 300,000 cycles. The low friction is attributed to the formation of silver molybdates layers, a lubricious double-metal oxide, in the coating. Double-metal oxides consisting of a group 6 transitional metal and silver (silver molybdate (Ag2Mo2O7) and silver tungstate (Ag2WO4)) were used for this investigation. Thin films and powders were investigated using high temperature x-ray diffraction, high-temperature Raman spectroscopy and differential scanning calorimetry in tandem with sliding tests from 25 to 600 °C. Our results were compared to external ab-initio molecular dynamic simulations performed elsewhere to qualify experimental results. The layered atomic structure of silver molybdate facilitates sliding, resulting in a low coefficient of friction (<0.2) from 300-500 °C. Unlike Ag2Mo2O7, however, Ag2WO4 does not possess a layered atomic structure and produced coefficients of friction (>0.4) in all temperature ranges between room temperature and 500 °C. Applying the knowledge gained from prior studies of the intrinsic properties of double metal oxides of group 6, chameleon coatings consisting of group 5 transitional metal nitrides (vanadium nitride, niobium nitride, and tantalum nitride) with silver inclusions were created using unbalanced magnetron sputtering to investigate their potential application as adaptive, friction reducing coatings. The coatings were tribotested against a Si3N4 counterface in the 22 to 1000 °C temperature range. In-situ Raman Spectroscopy measurements were taken during heating and wear testing at 700 °C to identify the evolution of phases in the coatings' surfaces and in the wear track. The chemical and structural properties of the coatings were also characterized before and after wear testing using x-ray diffraction. At higher temperatures, oxygen, silver and the transition metals react on the surface to form potentially lubricious double oxide phases (silver vanadate, silver niobate and silver tantalate). All coatings performed similarly up to 750 °C. The VN/Ag coating, however, had a lower coefficient of friction at 750 °C comparatively to TaN/Ag and NbN/Ag, likely due to its reported lower melting temperature (450 °C) and its layered crystal structure.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Abelard, Joshua Erold Robert. "Silver-Polyimide Nanocomposite Films: Single-Stage Synthesis and Analysis of Metalized Partially-Fluorinated Polyimide BTDA/4-BDAF Prepared from Silver(I) Complexes." W&M ScholarWorks, 2010. https://scholarworks.wm.edu/etd/1539626900.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Sass, Danielle. "Nano silver-Iron-reduced graphene oxide modified titanium dioxide photocatalyst for the remediation of Organic dye in water systems." University of the Western Cape, 2018. http://hdl.handle.net/11394/6274.

Повний текст джерела
Анотація:
Magister Scientiae - MSc (Chemistry)
Drinking water with high concentrations of inorganic and organic contaminants can cause adverse health defects. Specifically methyl orange dye is an organic water contaminant that has been known (along with others like methyl blue etc.) to have an increase in our water systems over the past few years due to increasing demand in industrial processes. It is therefore of utmost importance to remediate organic contaminants and ultimately enable prevention. The contaminants can be removed by photocatalysis. Anatase TiO2 is known for its photocatalytic degradation of environmental pollutants and photoelectro-chemical conversion of solar energy. However its application is limited since it is a wide band gap semiconductor, (Eg = 3.2 eV). The following study deals with the enhancement of the photocatalytic properties of TiO2 for remediation of organic water contaminants. The study was carried out to produce the two nanocomposites AgFe-TiO2 and AgFe-TiO2-rGO photocatalyst which purpose is to be cheap and easy to apply, with improved (fast and effective) photocatalytic degradation of methyl orange. The main objective was to decrease the band gap and to introduce intra-band gap states to absorb visible light. Modification of the TiO2 with small bandgap semiconductor, graphene and Ag- Fe nanoalloy reduced the bandgap energy for visible light absorption and photocatalytic degradation of methyl orange dye. The two composites were synthesised using sonication and chemical synthesis methods. A photocatalytic study (degradation of methyl orange dye) was carried out using a system incorporating an UV lamp source to determine the degradation of methyl orange catalysed by the synthesised photocatalysts AgFe-TiO2-rGO and AgFe-TiO2 along with UV-vis Spectroscopy. Morphological studies were carried out using HRSEM and HRTEM which determined the spherical agglomerated nature of AgFe-TiO2 and the sheet-like nature of AgFe-TiO2-rGO containing spherical agglomerants but that also contained pockets formed by the sheets of the rGO. XRD served as confirmation of the phase of TiO2 in both composites to be anatase. Analysis confirmed the formation and elemental determination of both composites. It was observed that the Band gap of TiO2 degussa decreased from 2.94 eV to 2.77 eV in the composite AgFe-TiO2. The photocatalytic reactivity of AgFe- TiO2 was an improvement from TiO2 and AgFe-TiO2-rGO based on the photocatalytic study. Therefore concluding that AgFe-TiO2 was the best catalyst to convert the dye (Orange II) into free radicals and ultimately remove the contaminant from the water compared to AgFe-TiO2-rGO.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Kaouk, Ali [Verfasser]. "Plasma Enhanced Chemical Vapour Deposition of Graphene-Hematite Nanocomposite Films as Photoanodes in Water-Splitting Reactions / Ali Kaouk." München : Verlag Dr. Hut, 2016. http://d-nb.info/1100967753/34.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Sass, Danielle Thandi. "Nano silver-iron-reduced graphene oxide modified titanium dioxide photocatalyst for the remediation of organic dye in water systems." University of the Western Cape, 2018. http://hdl.handle.net/11394/6410.

Повний текст джерела
Анотація:
Magister Scientiae - MSc (Chemistry)
Drinking water with high concentrations of inorganic and organic contaminants can cause adverse health defects. Specifically methyl orange dye is an organic water contaminant that has been known (along with others like methyl blue etc.) to have an increase in our water systems over the past few years due to increasing demand in industrial processes. It is therefore of utmost importance to remediate organic contaminants and ultimately enable prevention. The contaminants can be removed by photocatalysis. Anatase TiO2 is known for its photocatalytic degradation of environmental pollutants and photoelectro-chemical conversion of solar energy. However its application is limited since it is a wide band gap semiconductor, (Eg = 3.2 eV). The following study deals with the enhancement of the photocatalytic properties of TiO2 for remediation of organic water contaminants.
2021-12-31
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Pugliara, Alessandro. "Elaboration of nanocomposites based on Ag nanoparticles embedded in dielectrics for controlled bactericide properties." Thesis, Toulouse 3, 2016. http://www.theses.fr/2016TOU30324/document.

Повний текст джерела
Анотація:
Les nanoparticules (NPs) d'Ag sont très utilisées dans le secteur de la santé, dans l'industrie alimentaire et dans les produits de consommation pour leurs propriétés antimicrobiennes. Le grand rapport surface sur volume des NPs d'Ag permet une augmentation importante du relargage d'Ag comparé au matériau massif et donc une toxicité accrue vis à vis des micro-organismes sensibles à cet élément. Ce travail de thèse présente une évaluation des propriétés antimicrobiennes de petites NPs d'Ag (<20 nm) enrobées dans des matrices de silice sur la photosynthèse d'algues vertes. Deux techniques d'élaboration par voie physique ont été utilisées pour fabriquer ces nanocomposites: (i) l'implantation ionique à basse énergie et (ii) la pulvérisation d'Ag couplée avec la polymérisation plasma. Les propriétés structurales et optiques de ces nanostructures ont été étudiées par microscopie électronique à transmission, réflectivité et ellipsométrie. Cette dernière technique, couplée à un modèle basé sur l'approximation quasi-statique de type Maxwell-Garnett, a permis la détection de petites variations dans la taille et la densité des NPs d'Ag. Le relargage d'argent de ces NPs d'Ag enrobées dans des diélectriques a été mesuré par spectrométrie de masse après immersion dans de l'eau tamponnée. La toxicité à court terme de l'Ag sur la photosynthèse d'algues vertes, Chlamydomonas reinhardtii, a été évaluée par fluorométrie. L'enrobage des nanoparticules dans un diélectrique réduit leur interaction avec l'environnement, et les protège d'une oxydation rapide. La libération d'Ag bio-disponible (impactant sur la photosynthèse des algues) est contrôlée par la profondeur à laquelle se trouvent les NPs d'Ag dans la matrice hôte de silice. Cette étude permet d'envisager le design de revêtements à effet biocide contrôlé. En couplant les propriétés antimicrobiennes de ces NPs d'Ag enrobées à leur qualité d'antenne plasmonique, ces nanocomposites peuvent être utilisés pour détecter et prévenir les premières étapes de la formation de biofilms sur des surfaces. Ainsi, une dernière partie de ce travail est dédiée à l'étude de la stabilité et de l'adsorption de protéines fluorescentes Discosoma rouges recombinantes (DsRed) sur ces surfaces diélectriques avec la perspective du développement de dispositifs SERS
Silver nanoparticles (AgNPs) because of their strong biocide activity are widely used in health-care sector, food industry and various consumer products. Their huge surface-volume ratio enhances the silver release compared to the bulk material, leading to an increased toxicity for microorganisms sensitive to this element. This work presents an assessment of the biocide properties on algal photosynthesis of small (<20 nm) AgNPs embedded in silica layers. Two physical approaches were used to elaborate these nanocomposites: (i) low energy ion beam synthesis and (ii) combined silver sputtering and plasma polymerization. These techniques allow elaboration of a single layer of AgNPs embedded in silica films at defined nanometer distances (from 0 to 7 nm) beneath the free surface. The structural and optical properties of the nanocomposites were studied by transmission electron microscopy, reflectance spectroscopy and ellipsometry. This last technique, coupled to modelling based on the quasi-static approximation of the classical Maxwell-Garnett formalism, allowed detection of small variations over the size and density of the embedded AgNPs. The silver release from the nanostructures after immersion in buffered water was measured by inductively coupled plasma mass spectrometry. The short-term toxicity of Ag to the photosynthesis of green algae, Chlamydomonas reinhardtii, was assessed by fluorometry. Embedding AgNPs reduces their interactions with the buffered water, protecting the AgNPs from fast oxidation. The release of bio-available silver (impacting on the algal photosynthesis) is controlled by the depth at which AgNPs are located for the given host silica matrix. This provides a procedure to tailor the biocide effect of nanocomposites containing AgNPs. By coupling the controlled antimicrobial properties of the embedded AgNPs and their quality as plasmonic antenna, these coatings can be used to detect and prevent the first stages of biofilm formation. Hence, the last part of this work is dedicated to a study of the structural stability and adsorption properties of Discosoma recombinant red (DsRed) fluorescent proteins deposited on these dielectric surfaces with perspectives of development of SERS devices
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Ly, Kally Chein Sheng 1992. "Fabricação e caracterização de filme fino regenerável hidrofóbico." [s.n.], 2017. http://repositorio.unicamp.br/jspui/handle/REPOSIP/330349.

Повний текст джерела
Анотація:
Orientador: Antonio Riul Júnior
Dissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Física Gleb Wataghin
Made available in DSpace on 2018-09-02T14:50:41Z (GMT). No. of bitstreams: 1 Ly_KallyCheinSheng_M.pdf: 2442128 bytes, checksum: 86716c6c19fa3a9db425b32c36463141 (MD5) Previous issue date: 2017
Resumo: Materiais biomiméticos são inspirados em estruturas biológicas para a obtenção de propriedades e funcionalidades específicas. Dentre os materiais biomiméticos, os que são capazes de se regenerar (self-healing) despertaram grande interesse pelo potencial de aplicação em diversas áreas. Para ilustrar, alguns materiais autorregeneráveis poliméricos apresentam regeneração múltipla, necessitando apenas de água para que a regeneração ocorra em alguns minutos, aumentando consideravelmente a proteção mecânica da superfície contra desgastes, danos mecânicos entre outros. Entretanto, múltiplas imersões em água ou em meios aquosos pode degradar o material e neste contexto este projeto visa incorporar a hidrofobicidade a um sistema regenerável. Desta forma, o material regenerável hidrofóbico, durante sua regeneração imersa em água, poderá diminuir a interação da superfície não danificada com a água, reduzindo corrosões e degradações devido a meios aquosos. Estudamos a nanoestruturação de materiais através da técnica de automontagem por adsorção física (LbL, do inglês Layer-by-Layer) utilizando os polieletrólitos poli(etileno imina) (PEI) e poli(ácido acrílico) (PAA), a fim de produzir revestimentos capazes de se regenerar a danos mecânicos micrométricos. Adicionalmente, foram incorporados a estes dois materiais nanofolhas de óxido de grafeno reduzido (rGO) funcionalizados com poli(cloridrato de alilamina) (GPAH) e poli(estireno-sulfonato de sódio) (GPSS), com o intuito de verificarmos um aumento de resistência a abrasão do material e alterações nas propriedades elétricas na nanoestrutura formada para aumentar o potencial de aplicação em eletrônica flexível. A arquitetura molecular (GPAH-PEI/GPSS-PAA)60 foi caracterizada com espectroscopia Raman, medidas de ângulo de contato, microscopia de força atômica, medidas elétricas e nanoindentação. Foi observada boa regeneração do material após 15 minutos de imersão em água a temperatura ambiente em um dano mecânico da ordem de 10 micrômetros. Também observamos boa hidrofobicidade do filme LbL (GPAH-PEI/GPSS-PAA)60 ( teta = 136º), e medidas de microscopia de força atômica e perfilometria indicaram, respectivamente, rugosidade superficial de 55 nm em uma área de (2 ?m x 2 ?m) e espessura de filme de 30 ?m. A análise Raman apontou para uma forte interação das nanofolhas de rGO com os polímeros, corroborando o tem caráter elétrico isolante do filme (GPAH-PEI/GPSS-PAA)60, que apresentou função trabalho ~ 5,2 eV e condutividade elétrica da ordem de 10-7 S/cm, que acreditamos resultar das fortes interações das nanofolhas com os polímeros. Por fim, medidas de nanoindentação indicaram que a incorporação de nanofolhas de GPSS e GPAH aumentou em 10 vezes a dureza do nanocompósito formado, sem comprometer a regeneração
Abstract: Biomimetic materials are inspired in biological structures to obtain specific properties and functionalities and among them, those capable of self-healing brought great interest due to high potential of application in different areas. To illustrate, some polymeric self-healing materials present multiple regeneration in the presence of water, with the regeneration occurring within a few minutes, increasing considerably the mechanical protection of a surface against wear and mechanical damage among others. Nevertheless, multiple immersions in water or in aqueous media can degrade the material and in this context this project aims the incorporation of hydrophobicity to a self-healing system. In this way, the self-healing, hydrophobic material during its immersion in water may decrease the interaction of the damaged surface with water, reducing corrosion and degradation due to aqueous media. We study the nanostructuration f materials through the layer-by-layer (LbL) technique using poly(ethylene imine) (PEI) and poly(acrylic acid) (PAA) in order to produce self-healing coatings from micrometric mechanical damages. In addition, we also incorporate to these materials reduced graphene oxide (rGO) functionalized with poly(allylamine hydrochloride) (GPAH) and poly(styrene-sodium sulfonate) (GPSS), with the purpose of verifying an increase in the mechanical abrasion resistance of the material and changes in the electrical properties of the nanostructures formed to increase the potential application in flexible electronics. The molecular architecture (GPAH-PEI/GPSS-PAA)60 was characterized by Raman spectroscopy, contact angle measurements, atomic force microscopy, electrical measurements and nanoindentation. It was observed good self-healing capacity after 15 min f immersion in water at room temperature in a mechanical scratch of the order of 10 micrometers. It was also observed good hydrophobicity in the (GPAH-PEI/GPSS-PAA)60 LbL film ( teta = 136º) and atomic force microscopy and perfilometer indicate, respectively, surface roughness of 55 nm in a (2 ?m x 2 ?m) area and film thickness of 30 ?m. Raman analysis pointed out to a strong physical interaction between the rGO nanoplatelets with the polymeric materials, corroborating the strong insulating nature of (GPAH-PEI/GPSS-PAA)60 film that displayed a work function of 5.2 eV and electrical conductivity of 10-7 S/cm, which we believe results from the strong interactions of the nanosheets with the polymers. Finally, nanoindentation measurements indicated that the incorporation of GPAH and GPSS nanoplatelets increased hardness by 10 times, without compromising the regeneration
Mestrado
Física
Mestra em Física
1543078/2015
CAPES
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Cheviron, Perrine. "Nanostructuration de films nanocomposites amidon / argent et amidon / argent / montmorillonites par procédé de « chimie verte » : influence des voies de génération des nanoparticules métalliques sur la structure et les propriétés de transport." Thesis, Lyon 1, 2015. http://www.theses.fr/2015LYO10047/document.

Повний текст джерела
Анотація:
Des films nanocomposites amidon / argent ont été préparés par deux voies de génération vertes de nanoparticules d'argent. La première voie, dite ex situ, consiste à préparer tout d'abord une solution colloïdale d'argent qui est ensuite redispersée dans une matrice amidon plastifiée glycérol. Les nanoparticules d'argent colloïdales sont synthétisées en solution aqueuse par réduction du nitrate d'argent par du glucose en présence d'amidon stabilisant. La seconde voie, dite in situ, consiste à disperser le nitrate d'argent dans le film amidon plastifié et le réduire directement dans le film par traitement thermique en présence ou non de réducteur. L'influence du taux de glucose réducteur, du temps de synthèse et de la température a été étudiée en termes de taille, distribution de taille et dispersion des nanoparticules d'argent dans les films nanocomposites ex situ et in situ. Tout en gardant des paramètres de procédé comparables, les deux voies de nanostructuration des films amidon/argent ont également été comparées en termes de structure, de propriétés thermiques et de transport. Enfin, l'incorporation de charges montmorillonites a également été étudiée dans les deux voies de génération des nanoparticules métalliques. L'ensemble des travaux a permis de valider les deux voies de génération vertes menant à des nanoparticules d'argent dispersées de manière homogène et de tailles moyennes inférieures à 30 nm. La voie in situ à 85°C se distingue par des nanoparticules d'argent cristallines et de très petites tailles (inférieures à 10 nm) avec une interface amidon/argent cohésive particulière qui permettent d'améliorer les propriétés barrières aux gaz et à l'eau avec une diminution de perméabilité observée jusqu'à 90%
The present work reports a strategy involving the preparation of silver nanoparticles in a biodegradable polymer stemming from either an ex situ or an in situ method, using in both cases a completely green chemistry process. The influence of the reducing agent concentration and the silver nanoparticles generation route is investigated on the structure, the morphology and the properties of the nanocomposite films. In both routes, silver nanoparticles with a diameter below 30 nm were highlighted in the nanocomposite films. For all nanocomposite films, no modification on the crystalline structure of the starch matrix is observed in the presence of silver. The in situ generation route allowed to obtain the smallest silver nanoparticles with a diameter below 10 nm. Crystalline silver nanoparticles were obtained only from the in situ generation route at the temperature of 85°C. The introduction of montmorillonites in both generation routes was also studied. The decrease of the water sorption and the improvement of water and oxygen barrier properties were found to be not dependent on the reducing agent concentration but mainly on the presence of the crystalline structure of the silver nanoparticles. Thus, significant enhancement of the barrier properties were finally obtained for the in situ nanocomposite films thanks to an efficient interaction between the crystalline silver nanoparticles and the starch matrix
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Neella, Nagarjuna. "Development of Graphene Metal Nanocomposite Resistive Films for Flexible Sensors and Body Warmer Applications." Thesis, 2018. http://etd.iisc.ac.in/handle/2005/4263.

Повний текст джерела
Анотація:
Mankind’s desire is to replicate the nature’s creation provided an impetus and inspiration to the rapid advancements, especially progress made in the sensors and other devices for next generation technologies from nanoscience and engineering. Generally, human being has five basic sensory organs, which helps to perform routine tasks in normal life. This clearly signify the importance of basic sensory organs in a human life. In a similar way, sensors and other devices are very important for most of the scientific and engineering applications. The aim of the present thesis work is to explore the application possibilities of graphene and its derivative based films deposited on a flexible substrate for the development of sensors and other devices. Different types of flexible/rigid substrates such as Kapton, Cotton Cloth and Stainless Steel were chosen for different applications. Drop casting and Dip coating techniques were adopted for the deposition of graphene and its derivative based films onto the above-mentioned substrates. The necessary process parameters were optimized to achieve good quality films. To explore the applications in sensors and other devices have been developed by utilizing the direct transformation of graphene and its derivative nanomaterial-based films deposited on flexible/rigid substrates by above mentioned techniques. These devices include temperature sensor for measurement of environmental parameters, heating element devices on cotton cloth for wearable body warmer (in clod places). On the other hand, using piezoresistive effect of graphene and its derivative nanomaterial film strain gauges for force sensor have also been developed. This includes, a film nanomaterial of graphene and its derivatives was used for tensile test of force sensor/device, which work as a load cell. The present thesis work is divided into the following six chapters.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Zhang, Kai Chun, and 張凱鈞. "Fabrication and Characterization of Graphene/Epoxy Nanocomposite Films." Thesis, 2016. http://ndltd.ncl.edu.tw/handle/14076032421550644071.

Повний текст джерела
Анотація:
碩士
元智大學
機械工程學系
104
Graphene nanoplatelets (GNP) with excellent mechanical and thermal properties have been considered as ideal reinforcements. In this investigation, various contents of graphene nanoplatelets (MWCNT) ranging from 0.3 % ~1.0 % wt. were added to the epoxy to fabricate the nanocomposites. Nanocomposite films with thickness of 0.3 mm were deposited on the aluminum substrate using the spin coating. The Young’s modulus of the nanocomposite film was determined by the three-point bending test and nanoindentation test. The stress distribution and load carrying capability of the nanocomposite film subjected to tensile and bending loads were derived basing on the shear lag model and Bernoulli beam theory. Three-point and four-point bending tests were conducted to determine the interfacial fracture toughness of mode I and II, respectively. Experimental test results show that the Young’s modulus, load carrying capability and fracture toughness of the nanocomposite film are increasing with the increase of the content of GNPs In the case of nanocomposite film with 1.0 % wt. GNPs, the Young’s modulus, load carrying capability and fracture toughness are increased by 39%, 34% and 44% compared with neat epoxy, respectively. In addition, the dispersion of GNPs in the epoxy based matrix was examined using the scanning electronic microscope (SEM). The SEM images depict that GNPs are well dispersed resulting in the enhancement of the mechanical properties of the nanocomposite films.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Graphene silver nanocomposite films"

1

Functional Materials: Fundamental Research and Industrial Application. Trans Tech Publications, Limited, 2021.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Graphene silver nanocomposite films"

1

Khenfouch, Mohammed, Mimouna Baitoul, and Malik Maaza. "Graphene for the Elaboration of Nanocomposite Films for Optoelectronic Applications." In Graphene Optoelectronics, 41–62. Weinheim, Germany: Wiley-VCH Verlag GmbH & Co. KGaA, 2014. http://dx.doi.org/10.1002/9783527677788.ch3.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Iyer, K. Swaminathan, Jeff Moreland, Igor Luzinov, Sergiy Malynych, and George Chumanov. "Block Copolymer Nanocomposite Films Containing Silver Nanoparticles." In ACS Symposium Series, 149–66. Washington, DC: American Chemical Society, 2006. http://dx.doi.org/10.1021/bk-2006-0941.ch011.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Badilescu, Simona, Jai Prakash, and Muthukumaran Packirisamy. "Surface Gold and Silver-Polymer Nanocomposite Self-Standing Films." In Handbook of Polymer and Ceramic Nanotechnology, 1–20. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-10614-0_11-1.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Badilescu, Simona, Jai Prakash, and Muthukumaran Packirisamy. "Surface Gold and Silver-Polymer Nanocomposite Self-Standing Films." In Handbook of Polymer and Ceramic Nanotechnology, 199–217. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-40513-7_11.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zou, Qingqing, Congjun Cao, Huayang Zhu, and Chengmin Hou. "Preparation of Low Temperature Sintered Graphene/Silver Nanocomposite-Based Conductive Ink." In Advances in Graphic Communication, Printing and Packaging, 751–58. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-13-3663-8_101.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Das, Mamata, Ganeswar Sahu, and Jasaswini Tripathy. "Fabrication of Chitosan–Carboxymethyl Cellulose Silver Nanocomposite Films as Antimicrobial Materials." In Lecture Notes in Mechanical Engineering, 351–59. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-7779-6_30.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Cuong, N. V., P. N. N. Han, N. K. Hoang, and N. N. L. Giang. "Preparation, Characterization and Antibacterial Curcumin Encapsulated Chitosan-PAA Silver Nanocomposite Films." In IFMBE Proceedings, 58–61. Cham: Springer International Publishing, 2015. http://dx.doi.org/10.1007/978-3-319-11776-8_15.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Allahbakhsh, Ahmad. "High barrier graphene/polymer nanocomposite films." In Food Packaging, 699–737. Elsevier, 2017. http://dx.doi.org/10.1016/b978-0-12-804302-8.00020-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Gwizdała, Wojciech, Roman Czapla, and Wojciech Nawalaniec. "Modeling, simulations, and properties of thin films near graphene and its derivatives." In 2D and Quasi-2D Composite and Nanocomposite Materials, 269–94. Elsevier, 2020. http://dx.doi.org/10.1016/b978-0-12-818819-4.00018-0.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

"Silver–polyimide nanocomposite films: A single-stage thermally-induced metallization of aromatic fluorinated polyimides yielding highly reflective films." In Polyimides and Other High Temperature Polymers: Synthesis, Characterization and Applications, Volume 4, 269–94. CRC Press, 2007. http://dx.doi.org/10.1201/b12204-13.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Graphene silver nanocomposite films"

1

Neella, Nagarjuna, Venkateswarlu Gaddam, K. Rajanna, and M. M. Nayak. "Negative temperature coefficient behavior of graphene-silver nanocomposite films for temperature sensor applications." In 2016 IEEE 11th Annual International Conference on Nano/Micro Engineered and Molecular Systems (NEMS). IEEE, 2016. http://dx.doi.org/10.1109/nems.2016.7758260.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Mukhtar, Wan Maisarah, Razman Mohd Halim, Karsono Ahmad Dasuki, Affa Rozana Abdul Rashid, and Nur Athirah Mohd Taib. "Silver-Graphene Oxide Nanocomposite Film-based SPR Sensor for Detection of Pb2+ Ions." In 2018 IEEE International Conference on Semiconductor Electronics (ICSE). IEEE, 2018. http://dx.doi.org/10.1109/smelec.2018.8481315.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Devlin, Christie L. H., Robert L. Ewing, and Elena A. Guliants. "Resistivity comparison of graphene oxide and graphene oxide-silver nanocomposite paper." In NAECON 2014 - IEEE National Aerospace and Electronics Conference. IEEE, 2014. http://dx.doi.org/10.1109/naecon.2014.7045836.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zin, Farah Amanina Mohd, An’amt Mohamed Noor, Setia Budi, Muhammad Khairul Azhar Abdul Razab, Lee Seong Wei, Nor Hakimim Abdullah, and Mohd Hafiz Jamaludin. "Graphene oxide silver alginate and graphene oxide silver cellulose nanofibril nanocomposite: Comparison of antibacterial activity." In INTERNATIONAL CONFERENCE ON BIOENGINEERING AND TECHNOLOGY (IConBET2021). AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0079408.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ganesh, S., Arockiadoss, and S. Ramaprabhu. "Synthesis Of Graphene/Chitosan Nanocomposite Thin Films." In SOLID STATE PHYSICS, PROCEEDINGS OF THE 55TH DAE SOLID STATE PHYSICS SYMPOSIUM 2010. American Institute of Physics, 2010. http://dx.doi.org/10.1063/1.3504291.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Neella, Nagarjuna, Venkateswarlu Gaddam, K. Rajanna, M. M. Nayak, and T. Srinivas. "Highly flexible and sensitive graphene-silver nanocomposite strain sensor." In 2015 IEEE Sensors. IEEE, 2015. http://dx.doi.org/10.1109/icsens.2015.7370612.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Haldorai, Yuvaraj, Van Hoa Nguyen, and Jae-Jin Shim. "Silver Nanoparticles Decorated Graphene and Graphene Oxide Nanocomposite in Supercritical CO2: Antibacterial Activity." In 14th Asia Pacific Confederation of Chemical Engineering Congress. Singapore: Research Publishing Services, 2012. http://dx.doi.org/10.3850/978-981-07-1445-1_494.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Noor, An’amt Mohamed, Farah Amanina Mohd Zin, Ahmad Muhsin Mohammad Fatin, Setia Budi, Muhammad Hafiz Abu Bakar, Mohd Shaiful Sajab, Mohamad Faiz Mohd Amin, and Sahid Mehmood. "Preparation and optimization of antibacterial activity of graphene oxide silver nanocomposite." In INTERNATIONAL CONFERENCE ON BIOENGINEERING AND TECHNOLOGY (IConBET2021). AIP Publishing, 2022. http://dx.doi.org/10.1063/5.0079406.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Zin, Farah Amanina Mohd, An’amt Mohamed Noor, Mohammad Khairul Azhar Abd Razab, Nor Hakimin Abdullah, and Lee Seong Wei. "Synthesis of silver graphene oxide nanocomposite reinforced with kenaf cellulose nanofibril aerogel." In MATERIALS CHARACTERIZATION USING X-RAYS AND RELATED TECHNIQUES. Author(s), 2019. http://dx.doi.org/10.1063/1.5089344.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Wang, Pengpeng, Zhijun Wei, Minhua Shen, Hui Pan, Jun Fu, and Lesheng Chen. "In-situ synthesized silver-graphene nanocomposite with enhanced electrical and mechanical properties." In 2017 IEEE Holm Conference on Electrical Contacts. IEEE, 2017. http://dx.doi.org/10.1109/holm.2017.8088091.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Graphene silver nanocomposite films" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії