Книги з теми "Girders"

Mohamed Nazri, Fadzli, Mohd Azrulfitri Mohd Yusof, and Moustafa Kassem. Precast Segmental Box Girders. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-11984-3.

Lawson, R. M. Design of stub girders. Ascot: Steel Construction Institute, 1993.

Shahrooz, Bahram M., Richard A. Miller, Kent A. Harries, Qiang Yu, and Henry G. Russell. Strand Debonding for Pretensioned Girders. Washington, D.C.: Transportation Research Board, 2017. http://dx.doi.org/10.17226/24813.

Vance, Mary A. Beams and girders: Recent references. Monticello, Ill., USA: Vance Bibliographies, 1988.

American Association of State Highway and Transportation Officials. G13.1 guidelines for steel girder bridge analysis. Washington, D.C: American Association of State Highway and Transportation Officials, 2011.

Adamson, Daniel Edward Joseph. Fatigue tests of riveted bridge girders. Edmonton, Canada: University of Alberta, Dept. of Civil Engineering, 1995.

W, Hyer M., Bowles David E, and Langley Research Center. Applied Materials Branch., eds. The influence of time-dependent material behavior on the response of sandwich beams. Blacksburg, Va: College of Engineering, Virginia Polytechnic Institute and State University, 1991.

Li, K. L. Cable-stayed girders with reverse tension systems. Manchester: UMIST, 1997.

Zaunders, Bo. Gargoyles, girders, & glass houses: Magnificent master builders. New York: Dutton Children's Books, 2004.

Girders and cranes: A skyscraper is built. Mort Grove, Ill: A. Whitman, 1991.

ill, Munro Roxie, ed. Gargoyles, girders, & glass houses: Magnificent master builders. New York: Dutton Children's Books, 2004.

Szczęśniak, Wacław. Inercyjne obciążenia ruchome na belkach. Warszawa: Wydawnictwa Politechniki Warszawskiej, 1990.

Kuczma, Mieczysław Sylwester. Problem jednostronnego kontaktu belek i płyt na podłożu lepkosprężystym. Poznań: Wydawn. Politechniki Poznańskiej, 1991.

John F. Kennedy Space Center., ed. Determination of the effects of wind-induced vibration on cylindrical beams. [Kennedy Space Center, Fla.]: John F. Kennedy Space Center, NASA, 1991.

Craig, L. D. A case study of analysis methods for large deflections of a cantilever beam. [Marshall Space Flight Center, Ala.]: National Aeronautics and Space Administration, George C. Marshall Space Flight Center, 1994.

D, Ziemian Ronald, ed. Guide to stability design criteria for metal structures. 6th ed. Hoboken, N.J: John Wiley & Sons, 2010.

Nonclassical vibrations of arches and beams: Eigenvalues and eigenfunctions. New York, NY: McGraw-Hill, 2004.

I, Lebed Olga, ed. Free vibrations of beams and frames: Eigenvalues and eigenfunctions. New York: McGraw-Hill, 2004.

1929-, Galambos T. V., ed. Guide to stability design criteria for metal structures. 5th ed. New York: Wiley, 1998.

Oesterle, R. G. Design of precast, prestressed bridge girders made continuous. Washington, D.C: Transportation Research Board, National Research Council, 1989.

Itani, Rafik Y. Design of prestressed concrete girders without end blocks. [Olympia?]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division, 1986.

Russell, H. G. Optimized sections for high-strength concrete bridge girders. McLean, VA: U.S. Dept. of Transportation, Federal Highway Administration, Research and Development, Turner-Fairbank Highway Research Center, 1997.

1932-, Breen J. E., American Association of State Highway and Transportation Officials., and United States. Federal Highway Administration., eds. Anchorage zone reinforcement for post-tensioned concrete girders. Washington, D.C: Transportation Research Board, National Research Council, 1994.

Castrodale, Reid W. Extending span ranges of precast prestressed concrete girders. Washington, D.C: Transportation Research Board, 2004.

Fraser, Robert E. K. Behaviour of distortion-induced fatigue cracks in bridge girders. Edmonton, Alta., Canada: Dept. of Civil and Environmental Engineering, University of Alberta, 2000.

Litewka, Przemysław. Kontakt mie̜dzy belkami. Poznań: Wydawn. Politechniki Poznańskiej, 2007.

D'Andrea, Mark. Behaviour and rehabilitation of distortion-induced fatigue cracks in bridge girders. Edmonton: Dept. of Civil and Environmental Engineering, University of Alberta, 2001.

Deflection of beams for all spans and cross sections. New York: McGraw-Hill, 1985.

Myher, Ross P. Topological and shape optimization of beams. [Downsview, Ont.]: University of Toronto, Institute for Aerospace Studies, 2002.

Gauvreau, Paul. Load tests of concrete girders prestresses with unbonded tendons. Basel: Birkhäuser, 1992.

Miller, Richard A., P.E., National Cooperative Highway Research Program., National Research Council (U.S.). Transportation Research Board., and American Association of State Highway and Transportation Officials., eds. Connection of simple-span precast concrete girders for continuity. Washington, D.C: Transportation Research Board, 2004.

Sprague, E. T. E. Handling and erection of steel joists and joist girders. Myrtle Beach, S.C: Steel Joist Institute, 1987.

Giżejowski, Marian. Nośność sprężysto-plastycznych belek ciągłych o przekrojach otwartych. Warszawa: Państwowe Wydawn. Nauk., 1986.

Fares, Nabil. Practical approximate analysis of beams and flanges. Reston: American Society of Civil Engineers, 2012.

Green, Deborah L. Design of web-flange beam or girder splices. Edmonton, Alta: Dept. of Civil Engineering, University of Alberta, 1987.

Gaetano, Giunta, and Petrolo Marco, eds. Beam structures: Classical and advanced theories. Hoboken, N. J: Wiley, 2011.

I, Olʹkov I͡A. Optimalʹnoe proektirovanie metallicheskikh predvaritelʹno napri͡azhennykh ferm. Moskva: Stroĭizdat, 1985.

A, Soltis Lawrence, and Forest Products Laboratory (U.S.), eds. Experimental shear strength of glued-laminated beams. [Madison, WI]: U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory, 1994.

Kuchma, Daniel, Ashraf Ayoub, Amir Mirmiran, Sang-Wook Bae, Abdeldjelil Belarbi, and Ayman Okeil. Design of FRP Systems for Strengthening Concrete Girders in Shear. Washington, D.C.: National Academies Press, 2011. http://dx.doi.org/10.17226/14465.

High Girders. Orion Publishing Group, Limited, 2021.

Marr, John. Girders in the Sand. Exile, 2000.

Lawson, R. M., and R. McConnel. Design of Stub Girders. Steel Construction Institute,The, 1992.

Branston, John William, and C. R. Whitter. Girders for Electric Overhead Cranes. Creative Media Partners, LLC, 2018.

Branston, John William, and C. R. Whitter. Girders for Electric Overhead Cranes. Creative Media Partners, LLC, 2018.

Wardill, Devin. Fatigue analysis of bridge girders. 1994.

Coppa & Avery Consultants. Beams & Girders: A Bibliographical Overview of Design, Testing & Failure in Steel & Concrete Beams & Girders. Vance Bibliographies, 1986.

Galbraith, Ronald L. Prestressed concrete girders without end blocks. 1985.

The influence of time-dependent material behavior on the response of sandwich beams. Blacksburg, Va: College of Engineering, Virginia Polytechnic Institute and State University, 1991.

Gan, Buntara S. Isogeometric Approach to Beam Structures: Bridging the Classical to Modern Technique. Springer International Publishing AG, 2018.

Gan, Buntara S. Isogeometric Approach to Beam Structures: Bridging the Classical to Modern Technique. Springer International Publishing AG, 2017.