Статті в журналах з теми "Gf30"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Gf30".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Arifin, Mohd Khairol A., Nik Mohd Idham Nik Hassan, and Mohd Firdaus Abdullah. "Analysis of MPV Dashboard Using SolidWorks and ABAQUS." Key Engineering Materials 471-472 (February 2011): 634–39. http://dx.doi.org/10.4028/www.scientific.net/kem.471-472.634.
Повний текст джерелаGuamán Rivera, Santiago Alexander, Angela Edith Guerrero-Pincay, Nelson Rene Ortiz-Naveda, and Raúl Lorenzo González-Marcillo. "Prediction of the nutritional values by INRA (2018) feed evaluation system of Megathyrsus maximus subjected to different grazing strategies." Journal of Agriculture and Environment for International Development (JAEID) 117, no. 1 (June 29, 2023): 117–40. http://dx.doi.org/10.36253/jaeid-14203.
Повний текст джерелаDomingo, Rosario, Beatriz de Agustina, and Jorge Ayllón. "Study of Drilled Holes after a Cryogenic Machining in Glass Fiber-Reinforced Composites." Applied Sciences 12, no. 20 (October 12, 2022): 10275. http://dx.doi.org/10.3390/app122010275.
Повний текст джерелаWang, Haipeng, Yang Chen, Zaoyang Guo, and Yingchun Guan. "Porosity Elimination in Modified Direct Laser Joining of Ti6Al4V and Thermoplastics Composites." Applied Sciences 9, no. 3 (January 26, 2019): 411. http://dx.doi.org/10.3390/app9030411.
Повний текст джерелаHirsch, Patrick, Marianne John, Daniel Leipold, André Henkel, Sylvia Gipser, Ralf Schlimper, and Matthias Zscheyge. "Numerical Simulation and Experimental Validation of Hybrid Injection Molded Short and Continuous Fiber-Reinforced Thermoplastic Composites." Polymers 13, no. 21 (November 7, 2021): 3846. http://dx.doi.org/10.3390/polym13213846.
Повний текст джерелаBorges, Catarina S. P., Alireza Akhavan-Safar, Eduardo A. S. Marques, Ricardo J. C. Carbas, Christoph Ueffing, Philipp Weißgraeber, and Lucas F. M. da Silva. "Effect of Water Ingress on the Mechanical and Chemical Properties of Polybutylene Terephthalate Reinforced with Glass Fibers." Materials 14, no. 5 (March 7, 2021): 1261. http://dx.doi.org/10.3390/ma14051261.
Повний текст джерелаBorges, Catarina S. P., Eduardo A. S. Marques, Ricardo J. C. Carbas, Alireza Akhavan-Safar, Christoph Ueffing, Philipp Weißgraeber, and Lucas F. M. da Silva. "Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive." Polymers 15, no. 4 (February 4, 2023): 788. http://dx.doi.org/10.3390/polym15040788.
Повний текст джерелаWypych, Artur, Piotr Siwak, Daniel Andrzejewski, and Jaroslaw Jakubowicz. "Titanium Plasma-Sprayed Coatings on Polymers for Hard Tissue Applications." Materials 11, no. 12 (December 13, 2018): 2536. http://dx.doi.org/10.3390/ma11122536.
Повний текст джерелаAstrouski, Ilya, Tereza Kudelova, Josef Kalivoda, and Miroslav Raudensky. "Shear Strength of Adhesive Bonding of Plastics Intended for High Temperature Plastic Radiators." Processes 10, no. 5 (April 20, 2022): 806. http://dx.doi.org/10.3390/pr10050806.
Повний текст джерелаMata, Francisco, Pedro Reis, and J. Paulo Davim. "Physical Cutting Model of Polyamide Composites (PA66 GF30)." Materials Science Forum 514-516 (May 2006): 643–47. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.643.
Повний текст джерелаDomingo, Rosario, Manuel Rodríguez-Martín, Roque Calvo, and Marta María Marín. "Delamination Factor Analysis in Cryogenically Drilled Holes in Fiberglass Reinforced Structures." Key Engineering Materials 957 (October 2, 2023): 107–12. http://dx.doi.org/10.4028/p-jw3lp5.
Повний текст джерелаDomingo, Rosario, Manuel García, Alberto Sánchez, and Rosa Gómez. "A Sustainable Evaluation of Drilling Parameters for PEEK-GF30." Materials 6, no. 12 (December 13, 2013): 5907–22. http://dx.doi.org/10.3390/ma6125907.
Повний текст джерелаKonczal, Natalia, Piotr Czyżewski, and Bartosz Nowinka. "Numerical analysis of chemically foamed thick-walled PA66 GF30 moldings." MATEC Web of Conferences 351 (2021): 01018. http://dx.doi.org/10.1051/matecconf/202135101018.
Повний текст джерелаKlimkeit, B., S. Castagnet, Y. Nadot, A. El Habib, G. Benoit, S. Bergamo, C. Dumas, and S. Achard. "Fatigue damage mechanisms in short fiber reinforced PBT+PET GF30." Materials Science and Engineering: A 528, no. 3 (January 2011): 1577–88. http://dx.doi.org/10.1016/j.msea.2010.10.081.
Повний текст джерелаSilva, Leonardo R., J. Paulo Davim, António Festas, and A. M. Abrão. "Machinability aspects concerning micro-turning of PA66-GF30-reinforced polyamide." International Journal of Advanced Manufacturing Technology 41, no. 9-10 (June 3, 2008): 839–45. http://dx.doi.org/10.1007/s00170-008-1537-y.
Повний текст джерелаDobrotă, Dan, and Sergiu Viorel Lazăr. "Ultrasonic Welding of PBT-GF30 (70% Polybutylene Terephthalate + 30% Fiber Glass) and Expanded Polytetrafluoroethylene (e-PTFE)." Polymers 13, no. 2 (January 19, 2021): 298. http://dx.doi.org/10.3390/polym13020298.
Повний текст джерелаMrzljak, Selim, Alexander Delp, André Schlink, Jan-Christoph Zarges, Daniel Hülsbusch, Hans-Peter Heim, and Frank Walther. "Constant Temperature Approach for the Assessment of Injection Molding Parameter Influence on the Fatigue Behavior of Short Glass Fiber Reinforced Polyamide 6." Polymers 13, no. 10 (May 13, 2021): 1569. http://dx.doi.org/10.3390/polym13101569.
Повний текст джерелаDomingo, Rosario, Manuel Garcia, and Maria Rosa Gomez. "Analysis of Energy Consumption in the Dry Drilling of PEEK GF30." Materials Science Forum 797 (June 2014): 29–34. http://dx.doi.org/10.4028/www.scientific.net/msf.797.29.
Повний текст джерелаPierantoni, M., M. De Monte, D. Papathanassiou, N. De Rossi, and M. Quaresimin. "Viscoelastic material behaviour of PBT-GF30 under thermo-mechanical cyclic loading." Procedia Engineering 10 (2011): 2141–46. http://dx.doi.org/10.1016/j.proeng.2011.04.354.
Повний текст джерелаSchmailzl, Anton, Benjamin Quandt, Michael Schmidt, and Stefan Hierl. "In-Situ process monitoring during laser transmission welding of PA6-GF30." Procedia CIRP 74 (2018): 524–27. http://dx.doi.org/10.1016/j.procir.2018.08.131.
Повний текст джерелаDobrotă, Dan, and Sergiu Viorel Lazăr. "Redesign of the Geometry of Parts Produced from PBT Composite to Improve Their Operational Behavior." Polymers 13, no. 15 (July 31, 2021): 2536. http://dx.doi.org/10.3390/polym13152536.
Повний текст джерелаDomingo, Rosario, Beatriz de Agustina, and Marta María Marín. "Study of Drilling Process by Cooling Compressed Air in Reinforced Polyether-Ether-Ketone." Materials 13, no. 8 (April 22, 2020): 1965. http://dx.doi.org/10.3390/ma13081965.
Повний текст джерелаGaitonde, V. N., S. R. Karnik, L. R. Silva, A. M. Abrão, and J. P. Davim. "Machinability Study in MicroTurning of PA66 GF30 Polyamide with a PCD Tool." Materials and Manufacturing Processes 24, no. 12 (December 21, 2009): 1290–96. http://dx.doi.org/10.1080/10426910903130115.
Повний текст джерелаCofaru, Nicolae, Lucian Roman, Adrian Pascu, and Valentin Oleksik. "Experimental Study Regarding of Bending Behaviour of Stabilizator Link." ACTA Universitatis Cibiniensis 68, no. 1 (December 1, 2016): 12–15. http://dx.doi.org/10.1515/aucts-2016-0003.
Повний текст джерелаArif, M. F., F. Meraghni, Y. Chemisky, N. Despringre, and G. Robert. "In situ damage mechanisms investigation of PA66/GF30 composite: Effect of relative humidity." Composites Part B: Engineering 58 (March 2014): 487–95. http://dx.doi.org/10.1016/j.compositesb.2013.11.001.
Повний текст джерелаPaulo Davim, J., Pedro Reis, Vı́tor Lapa, and C. Conceição António. "Machinability study on polyetheretherketone (PEEK) unreinforced and reinforced (GF30) for applications in structural components." Composite Structures 62, no. 1 (October 2003): 67–73. http://dx.doi.org/10.1016/s0263-8223(03)00085-0.
Повний текст джерелаLee, Chang Soon, Hee Jun Kim, Auezhan Amanov, Jeong Hwan Choo, Yong Kap Kim, and In Sik Cho. "Investigation on very high cycle fatigue of PA66-GF30 GFRP based on fiber orientation." Composites Science and Technology 180 (August 2019): 94–100. http://dx.doi.org/10.1016/j.compscitech.2019.05.021.
Повний текст джерелаDo, Thanh Trung, Tran Minh The Uyen, and Pham Son Minh. "The Feasibility of an Internal Gas-Assisted Heating Method for Improving the Melt Filling Ability of Polyamide 6 Thermoplastic Composites in a Thin Wall Injection Molding Process." Polymers 13, no. 7 (March 24, 2021): 1004. http://dx.doi.org/10.3390/polym13071004.
Повний текст джерелаStachowiak, Tomasz, Dariusz Kwiatkowski, Marcin Chmielarz, and Dominik Grzesiczak. "Analysis of Selected Properties of Polymer Mixtures Derived from Virgin and Re-Granulated PP with Glass Fibers." Materials 17, no. 6 (March 21, 2024): 1433. http://dx.doi.org/10.3390/ma17061433.
Повний текст джерелаSpina, Roberto, and Bruno Cavalcante. "Evaluation of Grinding of Unfilled and Glass Fiber Reinforced Polyamide 6,6." Polymers 12, no. 10 (October 6, 2020): 2288. http://dx.doi.org/10.3390/polym12102288.
Повний текст джерелаZhang, Longhui, David Townsend, Nik Petrinic, and Antonio Pellegrino. "Temperature dependent dynamic compressive response of PA66-GF30 composite under constant strain rate multiaxial loading." Composites Part B: Engineering 234 (April 2022): 109738. http://dx.doi.org/10.1016/j.compositesb.2022.109738.
Повний текст джерелаDomingo, Rosario, Manuel García, and María Rosa Gómez. "Determination of Energy during the Dry Drilling of PEEK GF30 Considering the Effect of Torque." Procedia Engineering 63 (2013): 687–93. http://dx.doi.org/10.1016/j.proeng.2013.08.195.
Повний текст джерелаDomingo, Rosario, and Óscar Castillo. "Design and Implementation of Active Learning Activities Focused on Simulations of Drilling in Composites." Materials Science Forum 853 (April 2016): 19–23. http://dx.doi.org/10.4028/www.scientific.net/msf.853.19.
Повний текст джерелаGaitonde, V. N., S. R. Karnik, Francisco Mata, and J. Paulo Davim. "Modeling and Analysis of Machinability Characteristics in PA6 and PA66 GF30 Polyamides through Artificial Neural Network." Journal of Thermoplastic Composite Materials 23, no. 3 (September 29, 2009): 313–36. http://dx.doi.org/10.1177/0892705709349319.
Повний текст джерелаGaitonde, V. N., S. R. Karnik, Francisco Mata, and J. Paulo Davim. "Machinability study in turning of unreinforced (PA6) and reinforced (PA66 GF30) polyamides with Polycrystalline Diamond (PCD) tools." International Journal of Materials and Product Technology 37, no. 1/2 (2010): 140. http://dx.doi.org/10.1504/ijmpt.2010.029465.
Повний текст джерелаCaputo, Francesco, Giuseppe Lamanna, Alessandro De Luca, and Enrico Armentani. "Thermo‐Mechanical Investigation on an Automotive Engine Encapsulation System Made of Fiberglass Reinforced Polyamide PA6 GF30 Material." Macromolecular Symposia 389, no. 1 (February 2020): 1900100. http://dx.doi.org/10.1002/masy.201900100.
Повний текст джерелаMeyer, Stefan P., Sebastian Fuderer, and Michael F. Zaeh. "A Holistic, Model-Predictive Process Control for Friction Stir Welding Processes Including a 1D FDM Multi-Layer Temperature Distribution Model." Metals 11, no. 3 (March 18, 2021): 502. http://dx.doi.org/10.3390/met11030502.
Повний текст джерелаGutiérrez, Juan Carlos Horta, Juan Carlos Campos Rubio, Paulo Eustáquio de Faria, and João Paulo Davim. "Usinabilidade de materiais compósitos poliméricos para aplicações automotivas." Polímeros 24, no. 6 (December 2014): 711–19. http://dx.doi.org/10.1590/0104-1428.1582.
Повний текст джерелаWitzgall, Christian, Patrick Steck, and Sandro Wartzack. "On the Influence of Fatigue Damage in Short-Fibre Reinforced Thermoplastic PBT GF30 on Its Residual Strength under High Strain Rates: An Approach towards Simulative Prediction." Journal of Composites Science 7, no. 1 (January 10, 2023): 23. http://dx.doi.org/10.3390/jcs7010023.
Повний текст джерелаAmmar, A., W. Leclerc, M. Guessasma, and N. Haddar. "Discrete element approach to simulate debonding process in 3D short glass fibre composite materials: Application to PA6/GF30." Composite Structures 270 (August 2021): 114035. http://dx.doi.org/10.1016/j.compstruct.2021.114035.
Повний текст джерелаMeraghni, F., H. Nouri, N. Bourgeois, C. Czarnota, and P. Lory. "Parameters identification of fatigue damage model for short glass fiber reinforced polyamide (PA6-GF30) using digital image correlation." Procedia Engineering 10 (2011): 2110–16. http://dx.doi.org/10.1016/j.proeng.2011.04.349.
Повний текст джерелаMartono, Yohanes, Lucia Devi Danriani, and Sri Hartini. "PENGARUH FERMENTASI TERHADAP KANDUNGAN PROTEIN DAN ASAM AMINO PADA TEPUNG GAPLEK YANG DIFORTIFIKASI TEPUNG KEDELAI (Glycine max (L))." Jurnal Agritech 36, no. 01 (April 28, 2016): 56. http://dx.doi.org/10.22146/agritech.10684.
Повний текст джерелаBrandão, R., C. S. P. Borges, E. A. S. Marques, R. J. C. Carbas, A. Akhavan-Safar, F. Schmid, C. Ueffing, P. Weißgraeber, and L. F. M. da Silva. "The influence of humidity and immersion temperature on the properties and failure mode of PBT-GF30/silicone bonded joints." Composite Structures 289 (June 2022): 115421. http://dx.doi.org/10.1016/j.compstruct.2022.115421.
Повний текст джерелаMeyer, Stefan P., Maren T. Herold, Jan B. Habedank, and Michael F. Zaeh. "A Study on the Bond Strength of Plastic–Metal Direct Bonds Using Friction Press Joining." Metals 11, no. 4 (April 18, 2021): 660. http://dx.doi.org/10.3390/met11040660.
Повний текст джерелаSykutera, Dariusz, Piotr Czyżewski, and Piotr Szewczykowski. "High-Performance of a Thick-Walled Polyamide Composite Produced by Microcellular Injection Molding." Materials 14, no. 15 (July 27, 2021): 4199. http://dx.doi.org/10.3390/ma14154199.
Повний текст джерелаCosta, André A., Pedro G. Martinho, and Fátima M. Barreiros. "Comparison between the Mechanical Recycling Behaviour of Amorphous and Semicrystalline Polymers: A Case Study." Recycling 8, no. 1 (January 10, 2023): 12. http://dx.doi.org/10.3390/recycling8010012.
Повний текст джерелаSykutera, Dariusz, Piotr Czyżewski, and Piotr Szewczykowski. "The Microcellular Structure of Injection Molded Thick-Walled Parts as Observed by In-Line Monitoring." Materials 13, no. 23 (November 30, 2020): 5464. http://dx.doi.org/10.3390/ma13235464.
Повний текст джерелаKlavzar, A., and R. Renz. "Identification of the critical load for cyclic loading of shortfibre reinforced PA6 GF30 by a quantitative analysis of the thermoelastic response." EPJ Web of Conferences 6 (2010): 11005. http://dx.doi.org/10.1051/epjconf/20100611005.
Повний текст джерелаCampos Rubio, J., T. H. Panzera, A. M. Abrao, Paulo E. Faria, and J. Paulo Davim. "Effects of high speed in the drilling of glass whisker-reinforced polyamide composites (PA66 GF30): statistical analysis of the roughness parameters." Journal of Composite Materials 45, no. 13 (November 12, 2010): 1395–402. http://dx.doi.org/10.1177/0021998310381540.
Повний текст джерелаHenriques, Bruno, Douglas Fabris, Joana Mesquita-Guimarães, Anne C. Sousa, Nathalia Hammes, Júlio C. M. Souza, Filipe S. Silva, and Márcio C. Fredel. "Influence of laser structuring of PEEK, PEEK-GF30 and PEEK-CF30 surfaces on the shear bond strength to a resin cement." Journal of the Mechanical Behavior of Biomedical Materials 84 (August 2018): 225–34. http://dx.doi.org/10.1016/j.jmbbm.2018.05.008.
Повний текст джерела