Добірка наукової літератури з теми "Gf30"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Gf30".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Gf30"
Arifin, Mohd Khairol A., Nik Mohd Idham Nik Hassan, and Mohd Firdaus Abdullah. "Analysis of MPV Dashboard Using SolidWorks and ABAQUS." Key Engineering Materials 471-472 (February 2011): 634–39. http://dx.doi.org/10.4028/www.scientific.net/kem.471-472.634.
Повний текст джерелаGuamán Rivera, Santiago Alexander, Angela Edith Guerrero-Pincay, Nelson Rene Ortiz-Naveda, and Raúl Lorenzo González-Marcillo. "Prediction of the nutritional values by INRA (2018) feed evaluation system of Megathyrsus maximus subjected to different grazing strategies." Journal of Agriculture and Environment for International Development (JAEID) 117, no. 1 (June 29, 2023): 117–40. http://dx.doi.org/10.36253/jaeid-14203.
Повний текст джерелаDomingo, Rosario, Beatriz de Agustina, and Jorge Ayllón. "Study of Drilled Holes after a Cryogenic Machining in Glass Fiber-Reinforced Composites." Applied Sciences 12, no. 20 (October 12, 2022): 10275. http://dx.doi.org/10.3390/app122010275.
Повний текст джерелаWang, Haipeng, Yang Chen, Zaoyang Guo, and Yingchun Guan. "Porosity Elimination in Modified Direct Laser Joining of Ti6Al4V and Thermoplastics Composites." Applied Sciences 9, no. 3 (January 26, 2019): 411. http://dx.doi.org/10.3390/app9030411.
Повний текст джерелаHirsch, Patrick, Marianne John, Daniel Leipold, André Henkel, Sylvia Gipser, Ralf Schlimper, and Matthias Zscheyge. "Numerical Simulation and Experimental Validation of Hybrid Injection Molded Short and Continuous Fiber-Reinforced Thermoplastic Composites." Polymers 13, no. 21 (November 7, 2021): 3846. http://dx.doi.org/10.3390/polym13213846.
Повний текст джерелаBorges, Catarina S. P., Alireza Akhavan-Safar, Eduardo A. S. Marques, Ricardo J. C. Carbas, Christoph Ueffing, Philipp Weißgraeber, and Lucas F. M. da Silva. "Effect of Water Ingress on the Mechanical and Chemical Properties of Polybutylene Terephthalate Reinforced with Glass Fibers." Materials 14, no. 5 (March 7, 2021): 1261. http://dx.doi.org/10.3390/ma14051261.
Повний текст джерелаBorges, Catarina S. P., Eduardo A. S. Marques, Ricardo J. C. Carbas, Alireza Akhavan-Safar, Christoph Ueffing, Philipp Weißgraeber, and Lucas F. M. da Silva. "Effect of the Interface/Interphase on the Water Ingress Properties of Joints with PBT-GF30 and Aluminum Substrates Using Silicone Adhesive." Polymers 15, no. 4 (February 4, 2023): 788. http://dx.doi.org/10.3390/polym15040788.
Повний текст джерелаWypych, Artur, Piotr Siwak, Daniel Andrzejewski, and Jaroslaw Jakubowicz. "Titanium Plasma-Sprayed Coatings on Polymers for Hard Tissue Applications." Materials 11, no. 12 (December 13, 2018): 2536. http://dx.doi.org/10.3390/ma11122536.
Повний текст джерелаAstrouski, Ilya, Tereza Kudelova, Josef Kalivoda, and Miroslav Raudensky. "Shear Strength of Adhesive Bonding of Plastics Intended for High Temperature Plastic Radiators." Processes 10, no. 5 (April 20, 2022): 806. http://dx.doi.org/10.3390/pr10050806.
Повний текст джерелаMata, Francisco, Pedro Reis, and J. Paulo Davim. "Physical Cutting Model of Polyamide Composites (PA66 GF30)." Materials Science Forum 514-516 (May 2006): 643–47. http://dx.doi.org/10.4028/www.scientific.net/msf.514-516.643.
Повний текст джерелаДисертації з теми "Gf30"
Lapa, Vítor Manuel da Cruz. "Optimização da maquinagem do PEEK e seus compósitos PEEK/CF30 e PEEK/GF30." Doctoral thesis, Universidade de Aveiro, 2007. http://hdl.handle.net/10773/2557.
Повний текст джерелаSendo o PEEK (poli-éter-éter-cetona) um termoplástico de Engenharia de última geração que apresenta excelentes propriedades físicas/mecânicas, tem a possibilidade de ser aplicado simples ou compósito nos mais variados tipos de componentes das indústrias (automóvel, aeronáutica, aeroespacial, nuclear, transportes, petrolífera, médica, biomédica, e outras). Este presente trabalho pretende mostrar a sua aptidão para ser processado através da maquinagem convencional por arranque de apara (torneamento, fresagem e furação). Verificou-se que a maquinagem do PEEK e seus compósitos PEEK/CF30 e PEEK/GF30, obrigou à utilização de ferramentas diamantadas com geometrias especiais e parâmetros de corte apropriados. Na maquinagem em corte ortogonal destes três materiais, em virtude dos diferentes tipos de apara obtidos, pôde ser aplicado o modelo de Merchant. Igualmente, utilizando o corte ortogonal, foi possível desenvolver uma Rede Neuronal Artificial (RNA) que aponta para a modelação eficiente de um conjunto de condições de maquinagem dos materiais compósitos com matriz de PEEK. A aprendizagem supervisionada da RNA baseou-se num Algoritmo Genético (AG) suportado por uma estratégia elitista. Os resultados obtidos mostram que a pesquisa evolucionária é uma boa opção, quando se associa o processo de optimização à aprendizagem supervisionada. Na maquinabilidade dos três materiais, as menores forças de corte ocorrem para o PEEK seguido do PEEK/GF30, sendo mais elevadas para o PEEK/CF30. Quanto às rugosidades nas superfícies obtidas, elas são menores para o PEEK seguidas do PEEK/CF30, enquanto que o PEEK/GF30 apresenta os valores mais elevados. Nas operações de fresagem e furação verificou-se que a utilização de ferramentas com geometrias especiais é um factor importante para se obterem forças de corte optimizadas e superfícies com bom acabamento.
Being PEEK (poli-ether-ether-ketona) a last generation engineering thermoplastic which has excellent physical/mechanical properties, it can be used both simple and composite in several varied sorts of components in automobile, aeronautical, aerospatial, nuclear, transportation, oil, medical, biomedical, and other industries. This present research intends to show its capability for being processed through conventional machining by taking off chip (turning, milling and drilling). It has been observed that the machining of PEEK and its composites PEEK/CF30 and PEEK/GF30, required the use of diamond tools with especial geometries and proper cutting parameters. For the machining in orthogonal cutting of these three types of materials, it was possible to use the Merchant model, due to the different sorts of chips acquired. Likewise, using the orthogonal cutting it was possible to develop an Artificial Neural Network (RNA) which leads to the efficient moulding of a series of machining conditions of composites materials with a PEEK matrix. The supervisioned learning RNA is based on a Genetic Algorithm (AG) supported by an elitist strategy. The results obtained show that, when the optimization process is linked to the supervisioned learning, the evolutionary research is a good option. In the machinability of these three materials, the lowest cutting forces occur for PEEK, then for PEEK/GF30, being the highest values for PEEK/CF30. In what concerns the roughness on the surfaces obtained, PEEK has the lowest values, followed by PEEK/CF30 and while PEEK/GF30 presents the highest values. By milling and drilling, it has been observed that the use of tools with special geometries is an important factor to get optimized cutting forces and a good surface finish.
Ammar, Ahmed. "Simulation numérique du comportement et de l'endommagement d'un matériau composite à fibres courtes : application au PA6/GF30 sous conditions environnementales." Electronic Thesis or Diss., Amiens, 2021. http://www.theses.fr/2021AMIE0080.
Повний текст джерелаThis thesis work aims at developing a powerful numerical tool based on the Discrete Element Method (DEM) to simulate the hygro-thermo-mechanical behaviour of a short glass fibre composite material. The proposed discrete modelling is performed in the case of a Polyamide 6 composite material reinforced with 30% of glass fibres (PA6/GF30). First of all, mechanical properties as well as damage mechanisms of PA6/GF30 are evaluated using experimental campaign. Then, a 3D Discrete Element (DE) model based on an original methodology is developed and validated by comparison with micromechanical approaches and experimental results in terms of elastic behaviour of PA6/GF30. Furthermore, the developed discrete model is exploited to simulate delamination process on mode I, II and mixed mode using a 3D cohesive zone model with a bilinear tractionseparation law. The fibre/matrix interfacial decohesion under mechanical stress,respectively in the case of a single-fibre and multi-fibre composite is also studied. Given the hydrophilic nature of PA6, the introduction of the decohesion model is interesting in order to take into account the interfacial damage due to water absorption at the fibre/matrix interface in the presence of moisture. Therefore, hygro-thermo-mechanical parameters are integrated into the discrete model in order to take into account the hygroscopic swelling and the damage of PA6/GF30 material under a wide range of environmental conditions. Comparisons with the Finite Element Method (FEM) have been established to check out the validity of the proposed DE model
Chekkour, Rabii. "Etude des mécanismes d'endommagement dans un polyamide 66 renforcé par des fibres de verre courtes, soumis à l'effet de vieillissement de l'éthylène glycol et de l'antigel." Electronic Thesis or Diss., Paris, HESAM, 2023. http://www.theses.fr/2023HESAE006.
Повний текст джерелаThe aim of this work is to study the effect of ethylene glycol and coolant aging on the overall behavior and the damage mechanisms of the Polyamide 66 (PA66) and the short glass fiber reinforced polyamide 66 (PA66/GF). To this end, a proper experimental aging setup is designed and presented for conditioning the samples in glycol and coolant at different aging durations. The aging media absorption effect is analyzed through the swelling and the mass variation (uptake). The effect of cooling is also studied by applying two cooling methods. Moreover, monotonic tensile tests are performed to study the aging effect on the PA66 and PA66/GF. SEM (Scanning Electron Microscopy) investigation is then performed to characterize the damage mechanisms and their evolution with the increase of the aging duration. X-ray micro-computed tomography (µCT) observations are also carried out to quantify the damage depending on the aging duration, the material, and the area of interest (AOI).Experimental findings show that the glycol and coolant absorption is more important for the PA66 unreinforced matrix than for the short glass fiber-reinforced PA66 composite. In addition, the stiffness, as well as the material deformability, are found to be significantly affected by aging. In terms of composite degradation, the main damage mechanisms are the damage at the fiber's end and the fiber-matrix interface, and for the high aging durations, cavitation in the polymer matrix is observed. The X-ray µCT investigation has indicated pronounced damage mostly located at the core and surface of the samples, which is due to the well-known shell-core microstructure of injected PA66/GF composites. All these conclusions lead to inferring the significant and irreversible effect of glycol and coolant aging on the bulk mechanical behavior and damage mechanisms of the investigated materials
Raffai, Peter. "Vytvoření a validace výpočtového FEM modelu kliky dveří pro crashové výpočty." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2012. http://www.nusl.cz/ntk/nusl-230249.
Повний текст джерелаCorredori, Paulo César 1966. "Aplicação de polipropileno com 35% de fibra de vidro (PP GF35) em substituição à poliamida com 35% de fibra de vidro (PA6 GF35) na fabricação de coletores de admissão em motores de 03 cilindros Bi-combustível." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265770.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-28T04:10:25Z (GMT). No. of bitstreams: 1 Corredori_PauloCesar_M.pdf: 3624543 bytes, checksum: 7dff308f63100edb2b9d157d780f91b3 (MD5) Previous issue date: 2015
Resumo: Este mundo que vivemos está se tornando extremamente competitivo dia após dia, a apenas cinquenta anos, os motores ciclo Otto permaneciam quase os mesmos quando foram inventados pelo engenheiro alemão Nikolaus August Otto no final do século 19. Foi somente no final da década de 1970 que os antigos motores começaram a ganhar apelos tecnológicos, como injeção eletrônica, ignição eletrônica, controle de emissões e gás carbônico, etc., com isso, todas as montadoras começaram a buscar soluções que fizessem do seu veículo, o melhor ou o mais econômico e menos poluente. Face às novas exigências governamentais ao redor do mundo, todas as montadoras e autopeças estão trabalhando incansavelmente na busca de várias soluções, soluções estas que vão desde a diminuição de emissões evaporativas, redução do consumo de combustível, seja em função de um motor mais econômico quanto a melhorias de aerodinâmica, que resulta em menor fenômeno de arraste e consequente economia de combustível. Sabe-se também que redução de peso impacta diretamente na redução do fenômeno de arraste, portanto, gera um menor consumo de combustível, por isso, estamos vendo o crescente interesse das indústrias automotivas em substituir as antigas e atuais peças em metal que são normalmente pesadas, para peças extremamente mais leves em plásticos de engenharia e com alta resistência térmica, mecânica, etc., e quem nem por isso não mantenham a mesma qualidade funcional das peças em metal. Plásticos de engenharia como a Poliamida 6 com 35% de fibra de vidro (PA6 GF35), já estão sendo aplicados no mercado automotivo a pelo menos quase 20 anos, pois os primeiros coletores de admissão e filtro de ar em plástico nasceram utilizando esta matéria prima, hoje em dia, nesta busca por redução de peso e consequentemente preço, um material plástico chamado Polipropileno com 35% de fibra de vidro (PP GF35), que até não muito tempo atrás era de segunda linha, passa a ser de suma importância para alcançar objetivos que técnicos e monetários que até outro dia, somente era possível com a Poliamida 6 com 35% de fibra de vidro (PA6 GF35). Hoje em dia o polipropileno é um polímero de destaque no setor automotivo, pois ele se destaca pela alta resistência química e solvente, boa estabilidade dimensional, flexibilidade, durabilidade, excelente balanço entre impacto e rigidez. Sendo assim, uma matéria prima que era utilizada na fabricação de fios de tecelagem, embalagens flexíveis, brinquedos, copos plásticos, corpo de eletrodomésticos, está sendo usado em peças de alto valor agregado, alto e com tal desempenho técnico como um coletor de admissão e em quase todas as peças de acabamento interno e externo da maioria das empresas automotiva do Brasil e do mundo
Abstract: Due to strong competition among automotive companies around the world, and also by the incessant search in order to reduce weights in vehicles, reducing fuel consumption and therefore reduce carbonic gas emissions, the automakers are working on several fronts in order to reach the targets already defined through the government¿s laws. Given these several requests, the automotive parts industries, together with the raw materials industry, are working to achieve these goals. Thus, reductions in power cell consequently the numbers of cylinders in the engines are already a reality, for example three cylinders engines are replacing the four cylinder engines, and the most important comment, and they are keeping the same driving force. In addition, we are working so hard in order to replace the current Intake Manifold in Polyamide 6 with 35% glass fiber (PA6 GF35), for Polypropylene with 35% glass fiber (PP GF35), so is being reduced around 15% of weight, changing only the raw material. Polypropylene (PP), who was a second-line raw material in the past at the automotive world, becomes to move of other excellent quality of baseline of importance, as well, as reducing the weight of the piece, how it reduces the price piece value, as also the polypropylene is cheaper around of 15% more than the polyamide 6. This new polypropylene for Intake Manifold needs to be heat stabilizer, but needs not to be flame retardant. Many characteristics had been considered very important in the decision matrix in order to reach a good polymer, as well, mechanical resistance to the tensile and impact, density, water absorption, thermal resistance, chemical resistance regarding fuel, injection process and the availability of mass production. Only twenty years ago, all engines Cycle Otto were manufactured, using Intake Manifold in aluminum material, due to the aluminum caused a chemical reaction in physical contact with the alcohol, it was invented the Intake Manifold in Polyamide 6. Today all the automotive world uses Intake Manifold in Polyamide 6 for Cycle Otto application, but due to the excellent results using the polypropylene raw material, all automakers are moving to this new raw material, which in a not so distant past, was regarded as the second line in the automotive industry
Mestrado
Materiais e Processos de Fabricação
Mestre em Engenharia Mecânica
Bourgogne, Quentin. "Contribution à l’étude du comportement mécanique d’un PPS/GF40 sous différents chargements avec prise en compte des effets de l’environnement de sollicitation : étude expérimentale et modélisation multi-échelle pour application au développement de pièces automobiles." Electronic Thesis or Diss., Université de Lorraine, 2020. http://www.theses.fr/2020LORR0181.
Повний текст джерелаThis thesis presents an experimental and theoretical study conducted on a PPS/GF40 and its matrix. Widely used for under-the-hood applications in the automotive industry, those materials are subjected to high temperatures and aging effects of cooling liquid. Therefore, the understanding of those phenomena is essential to design mechanical parts. Thus, an experimental campaign in the tensile mode has been carried out with different temperatures and glycol proportions in the cooling liquid, for monotonic and cyclic loadings on neat and reinforced PPS. The results of these tests allowed us to highlight some of the main physical phenomena occurring during these solicitations under tough hydro-thermal conditions. Taking into account this analysis, a visco-elasto-pseudo-viscoplastic model is proposed. Moreover, this model allows the consideration of the cooling liquid effects and its constituents by temperature/humidity equivalence. The accuracy of the model was confronted to an artificial intelligence based one, in order to study the maximal accuracy physically reachable. Finally, the evolution of the model parameters has been studied with the adjunction of short glass fibres and for specifics orientation distribution. Starting from the study of the mechanical behavior of the PPS matrix, an analytical homogenization was then performed. Differences between experimental and predicted plastic behaviors were highlighted. Finite element analyses considering inter-phase damage were done at different temperatures and for several fiber orientations so to explain differences arising between analytical approach and experimental results. This work allowed a study of the evolution of the impact of this damage on mechanical properties as a function of temperature and fiber orientation. This work led to highlight a weakening of the fiber/matrix interface for a liquid aged composite and to quantify the decrease of the interface properties. Finally, fatigue behavior of the composite is studied as a function of fiber orientation. The modeling parameters determined from the study of the monotonic behavior of the composite were taken into account to propose a prediction of the Wöhler curves as a function of temperature. The prediction of the Wöhler curves as a function of temperature being possible, a 1D model was then proposed in order to evaluate the increase of temperature due to self-heating phenomenon during fatigue loading, considering ageing consequences
Castro, Daniel Valente. "Projeto de estrutura de base polimérica para a construção civil." Master's thesis, 2015. http://hdl.handle.net/10316/29065.
Повний текст джерелаO presente trabalho estuda a viabilidade de uma estrutura alternativa às utilizadas na construção civil, tanto em termos dos materiais selecionados como em termos de método de construção de habitações unifamiliares. Um dos objetivos estabelecidos é a estrutura ser simples e rápida de montar, ao contrário de alguns tipos de construção já existentes, aliada a um processamento de materiais simples e de baixo custo, de modo a viabilizar a produção em série. Neste contexto, o trabalho explora a utilização de materiais poliméricos reforçados, mais concretamente de uma mistura de politereftalato de butileno com politereftalato de etileno, com a adição de 30% de fibra de vidro. O conceito adotado é baseado na construção modular e envolve componentes de dimensões pré-definidas, mais concretamente três tipos de perfis e quatro dimensões de módulos. O estudo é complementado com a análise do processo de fabrico dos componentes e respetivos custos, resultantes da produção em série de estruturas baseadas no conceito proposto. O estudo é complementado também com a análise de materiais e técnicas que podem ser combinados com a estrutura, de modo a garantir os requisitos de funcionalidade e permitir semelhança estética com a construção convencional. A utilização do programa de CAD da Dassault Systèmes, CATIA® V5 R20, permite planear toda a construção e definir de forma rigorosa a lista de componentes, o que garante a minimização dos desperdícios de material e de derrapagens nos custos.
This work studies the feasibility of an alternative structure to those used currently in construction, both in terms of the materials selected and in terms of construction method for a family house. One of the objectives is that the structure is simple and quick to assemble, unlike some types of existing construction, combined with simple processing, low cost materials, to facilitate the mass production. In this context, the work explores the use of reinforced polymeric material, more specifically a mixture of butylene terephthalate and ethylene terephthalate, with the addition of 30% glass fiber. The concept adopted is based on modular construction and involves the use of components with pre-defined dimensions, more specifically three types of profile and four modules with different dimensions. The study is completed with the analysis of the manufacturing process of the components and their respective costs, resulting from the mass production of structures based on the proposed concept. The study is also complemented with the analysis of materials and techniques that can be combined with the structure, to ensure the functionality requirements and allow aesthetics similar to conventional construction. The use the of CAD program of Dassault Systèmes CATIA® V5 R20, allows the planning of the construction, including the accurate definition of the list of components, which ensures minimization of waste material and cost overruns.
Castagnet, S., C. Nadot-Martin, A. Bernasconi, E. Lainé, E. Conrado, and Philip D. Caton-Rose. "Through process modeling for the fatigue life assessment of notched injection-molded specimens." 2014. http://hdl.handle.net/10454/10610.
Повний текст джерелаThe study is based on a previously proposed methodology for multiaxial fatigue life assessment of injection-molded components (called ‘Through Process Modeling’ (TPM)). The present contribution focuses on stress concentration effects induced in notched samples. Purely macroscopic approaches are unable to capture the different mechanical responses of variably injected parts with the same shape. A high interest of the present method is to take into account the difference of fiber orientation resulting from the process. After briefly reminding the TPM method, it will be shown that good lifetime estimations are obtained for laterally injected samples, from a fatigue criterion identification based on longitudinally injected ones.
Lama, Aelina. "Screening of fungi with potential for producing fructooligosaccharides with enhanced bioactivity." Master's thesis, 2017. http://hdl.handle.net/10198/14398.
Повний текст джерелаFruto-oligossacáridos (FOS) podem ser encontrados em plantas e frutos, embora em concentrações reduzidas e com diferentes proporções relativas de cada FOS individual. Assim, de um ponto de vista industrial, a extração de fruto-oligossacáridosa partir de fontes naturais pode não ser economicamente viável. Recentemente, vários trabalhos foram publicados com o objetivo de estabelecer as melhores condições experimentais para maximizar os rendimentos / síntese de fruto-oligossacáridos. No entanto, embora se saiba que estes compostos podem ter um grande impacto na saúde, também tem sido reportado que os efeitos benéficos para a saúde podem depender da composição relativa de fruto-oligossacáridos. Aparentemente, uma dieta rica em nistose é preferível em comparação com uma preparação rica em questose, exibindo uma maior atividade antioxidante. Assim, neste trabalho, realizou-se um estudo inicial para avaliar a bioatividade de meios fermentativos obtidos usando diferentes fungos (A. aculeatus, A. japonicus, P. corylophilum, P. spinulosum e P. thomii), os quais são conhecidos produtores de FOS. Com base nos resultados preliminares da actividade antioxidante de (atividade de eliminação de radicais livres DPPH e atividade quelante de ferro), o fugo A. aculeatus foi selecionado como sendo aquele que apresentava maior poder antioxidante. Posteriormente, foram realizadas fermentações com o objetivo de estabelecer, com base num desenho experimental, a concentração inicial de sacarose (de 88 a 265 g / L) e a temperatura de fermentação (de 22 a 32ºC), que maximizava o poder antiooxidante dos meios fermentativos. De entre as duas condições experimentais avaliadas, verificou-se que a concentração inicial de sacarose influenciou significativamente o crescimento da biomassa (valor máximo de 16 ± 2 g), embora não tenha afetado significativamente o rendimento de FOS obtido, que variou entre 51 a 59 g de FOS/g de sacarose inicial. Finalmente, os resultados preliminares obtidos não permitiram estabelecer uma correlação direta entre as atividades antioxidantes dos caldos de fermentação e as concentrações de FOS individuais ou totais.
Частини книг з теми "Gf30"
Zhang, Xiaojia, Lei Den, Changyong Lin, and Bo Liu. "Research on Static Viscoelastic and Tribological Properties of PP-EPDM, PP-GF30 and ABS in Automobile." In Lecture Notes in Electrical Engineering, 293–301. Singapore: Springer Singapore, 2017. http://dx.doi.org/10.1007/978-981-10-3527-2_26.
Повний текст джерелаCrean, P. B., T. S. Murty, and J. A. Stronach. "The Fine Grid Model: GF3." In Mathematical Modelling of Tides and Estuarine Circulation, 115–28. Berlin Heidelberg New York: Springer-Verlag, 2013. http://dx.doi.org/10.1002/9781118669167.ch5.
Повний текст джерелаТези доповідей конференцій з теми "Gf30"
Schaaf, A., M. De Monte, C. Hoffmann, M. Vormwald, and M. Quaresimin. "Damage mechanisms in PBT-GF30 under thermo-mechanical cyclic loading." In PROCEEDINGS OF PPS-29: The 29th International Conference of the Polymer Processing Society - Conference Papers. American Institute of Physics, 2014. http://dx.doi.org/10.1063/1.4873852.
Повний текст джерелаJohnson, S., and E. Kerr-Anderson. "Accelerated Tensile-Tensile Fatigue S-N Curve Characterization of PP-GF30 and PA66-GF50 using Block Testing and Cumulative Damage Theory." In CAMX 2023. NA SAMPE, 2023. http://dx.doi.org/10.33599/nasampe/c.23.0132.
Повний текст джерелаHarvey, R., M. Kauphusman, and E. Kerr-Anderson. "Comparing long term multi-temperature flexural creep with DMA TTSP techniques for neat PP and PP-GF30 long fiber thermoplastic." In CAMX 2023. NA SAMPE, 2023. http://dx.doi.org/10.33599/nasampe/c.23.0146.
Повний текст джерелаWang, Qian, Lingyu Sun, Lijun Li, and Le Shen. "Hygrothermal Degradation of GFRP/HSS Interface in Metal-Polymer Hybrid Structures." In ASME 2016 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/imece2016-65779.
Повний текст джерелаYin, Di, Bing Han, Jili Sun, Aiping Chen, Liangbo Zhao, Xinzhe Yuan, Lihua Zhong, and Yuxin Hu. "A TOPSAR Calibration Method For Processing System Of GF3 Next Generation." In 2019 6th Asia-Pacific Conference on Synthetic Aperture Radar (APSAR). IEEE, 2019. http://dx.doi.org/10.1109/apsar46974.2019.9048472.
Повний текст джерелаGuo, Li, Xia Wang, Yizhe Wang, and Mingyu Yue. "A New Approach of Digital Orthorectification Map Generation for GF3 Satellite Data." In 2019 6th Asia-Pacific Conference on Synthetic Aperture Radar (APSAR). IEEE, 2019. http://dx.doi.org/10.1109/apsar46974.2019.9048267.
Повний текст джерелаClarke, S., V. Lock, J. Duddy, JH Newman, and JR Kirwan. "SAT0068 Intra-articular hylan gf20 (synvisc) in the management of patellofemoral osteoarthritis of the knee (poak)." In Annual European Congress of Rheumatology, Annals of the rheumatic diseases ARD July 2001. BMJ Publishing Group Ltd and European League Against Rheumatism, 2001. http://dx.doi.org/10.1136/annrheumdis-2001.443.
Повний текст джерелаFarzaneh, S., A. Kallel, M. Shirinbayan, J. Fitoussi, and A. Tcharkhtchi. "Effect of cryogenic conditions on mechanical properties of polypropylene composite (GF50-PP) produced by thermocompression process." In PROCEEDINGS OF THE 37TH INTERNATIONAL CONFERENCE OF THE POLYMER PROCESSING SOCIETY (PPS-37). AIP Publishing, 2023. http://dx.doi.org/10.1063/5.0169116.
Повний текст джерелаGuo, Li, Xia Wang, and Mingyu Yue. "Improved Digital Orthorectification Map Generation Approach Using the Integrating of ZY3 and GF3 Image." In 2020 IEEE 5th International Conference on Image, Vision and Computing (ICIVC). IEEE, 2020. http://dx.doi.org/10.1109/icivc50857.2020.9177473.
Повний текст джерелаSato, Koji, Shinya Kurokawa, and Toshiyuki Sawa. "Visco-Elastic FEM Stress Analysis of Bolted Flange Connections With PTFE-Blended Gaskets Under Elevated Temperature." In ASME 2012 Pressure Vessels and Piping Conference. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/pvp2012-78395.
Повний текст джерелаЗвіти організацій з теми "Gf30"
พิมพิทักษ์, อุมาพร, ทรงจันทร์ ภู่ทอง, กิตตินันท์ โกมลภิส, นันทิกา คงเจริญพร та อณุมาศ บัวเขียว. การพัฒนาแถบทดสอบสำเร็จรูปสำหรับตรวจติดตามระดับฮอร์โมนโพรเจสเทอโรนในน้ำนมโค. สถาบันวิจัยเทคโนโลยีชีวภาพและวิศวกรรมพันธุศาสตร์ จุฬาลงกรณ์มหาวิทยาลัย, 2015. http://dx.doi.org/10.58837/chula.res.2015.2.
Повний текст джерелаSreedhara, Sindhu, Adam Brandt, and Jingfan Wang. PR-681-18701-R01 Evaluating the Use of Optical Gas Imaging Cameras for Above Ground Facilities. Chantilly, Virginia: Pipeline Research Council International, Inc. (PRCI), December 2020. http://dx.doi.org/10.55274/r0011989.
Повний текст джерела