Добірка наукової літератури з теми "Geometrical influences"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Geometrical influences".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Geometrical influences"
Javed, Saira, F. H. H. Al Mukahal, and S. B. A. El Sayed. "Geometrical Influences on the Vibration of Layered Plates." Shock and Vibration 2021 (January 15, 2021): 1–17. http://dx.doi.org/10.1155/2021/8843358.
Повний текст джерелаEdwardson, S. P., E. Abed, K. Bartkowiak, G. Dearden, and K. G. Watkins. "Geometrical influences on multi-pass laser forming." Journal of Physics D: Applied Physics 39, no. 2 (January 6, 2006): 382–89. http://dx.doi.org/10.1088/0022-3727/39/2/021.
Повний текст джерелаKruger, S. E., C. C. Hegna, and J. D. Callen. "Geometrical influences on neoclassical magnetohydrodynamic tearing modes." Physics of Plasmas 5, no. 2 (February 1998): 455–60. http://dx.doi.org/10.1063/1.872738.
Повний текст джерелаKorolev, Albert V., Andrei F. Balayev, and Boris M. Iznairov. "Relaxation of Residual Stresses in Bearing Rings Based on the Optimal Geometric Setup of Equipment for Centerless Running." Materials Science Forum 973 (November 2019): 183–88. http://dx.doi.org/10.4028/www.scientific.net/msf.973.183.
Повний текст джерелаRuf, A., P. Berger, F. Dausinger, and H. Hügel. "Analytical investigations on geometrical influences on laser drilling." Journal of Physics D: Applied Physics 34, no. 18 (September 5, 2001): 2918–25. http://dx.doi.org/10.1088/0022-3727/34/18/327.
Повний текст джерелаJiang, Yong Jun. "Statistical Tolerance Analysis Based on Constraint Satisfaction Problems and Monte Carlo Simulation." Advanced Materials Research 433-440 (January 2012): 6616–21. http://dx.doi.org/10.4028/www.scientific.net/amr.433-440.6616.
Повний текст джерелаFan, Yu Feng, Yong Jian Zhu, and Shao Hui Yin. "Optimum Geometrical Arrangement of Workpiece in the Ultrasonic Vibration Shoe Centerless Grinding." Advanced Materials Research 97-101 (March 2010): 4100–4105. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.4100.
Повний текст джерелаNoh, Sam Young, and Sang Yun Lee. "Structural Behaviour Evaluation of Natural Draught Cooling Towers under the Consideration of Shell-Geometric Parameters." Applied Mechanics and Materials 284-287 (January 2013): 1396–400. http://dx.doi.org/10.4028/www.scientific.net/amm.284-287.1396.
Повний текст джерелаdu Plessis, J. P. "Geometrical Models for Porous Membrane Morphologies." Water Science and Technology 25, no. 10 (May 1, 1992): 363–72. http://dx.doi.org/10.2166/wst.1992.0262.
Повний текст джерелаLiu, Xueshu, Yuxing Yang, Li Huang, Ping Zhang, and Hang Gao. "Numerical Analysis of the Influences of Geometrical Deviation on Delamination in Composite Laminates around the Countersunk Hole." International Journal of Aerospace Engineering 2018 (2018): 1–11. http://dx.doi.org/10.1155/2018/5061948.
Повний текст джерелаДисертації з теми "Geometrical influences"
Seroto, Ngwako. "Exploration of geometrical concepts involved in the traditional circular buildings and their relationship to classroom learning." Thesis, University of Limpopo (Turfloop Campus), 2006. http://hdl.handle.net/10386/1035.
Повний текст джерелаTraditionally, mathematics has been perceived as objective, abstract, absolute and universal subject that is devoid of social and cultural influences. However, the new perspective has led to the perceptions that mathematics is a human endeavour, and therefore it is culture-bound and context-bound. Mathematics is viewed as a human activity and therefore fallible. This research was set out to explore geometrical concepts involved in the traditional circular buildings in Mopani district of Limpopo Province and relate them to the classroom learning in grade 11 classes. The study was conducted in a very remote place and a sample of two traditional circular houses from Xitsonga and Sepedi cultures was chosen for comparison purposes because of their cultural diversity. The questions that guided my exploration were: • Which geometrical concepts are involved in the design of the traditional circular buildings and mural decorations in Mopani district of the Limpopo Province? • How do the geometrical concepts in the traditional circular buildings relate to the learning of circle geometry in grade 11 class? The data were gathered through my observations and the learners’ observations, my interviews with the builders and with the learners, and the grade 11 learners’ interaction with their parents or builders about the construction and decorations of the traditional circular houses. I used narrative configurations to analyse the collected data. Inductive analysis, discovery and interim analysis in the field were employed during data analysis. From my own analysis and interpretations, I found that there are many geometrical concepts such as circle, diameter, semi-circle, radius, centre of the circle etc. that are involved in the design of the traditional circular buildings. In the construction of these houses, these concepts are involved from the foundation of the building to the roof level. All these geometrical concepts can be used by both educators and learners to enhance the teaching and learning of circle geometry. Further evidence emerged that teaching with meaning and by relating abstract world to the real world makes mathematics more relevant and more useful.
Escrig, Josep. "Influence of geometrical parameters on gas-liquid intermittent flows." Thesis, University of Nottingham, 2017. http://eprints.nottingham.ac.uk/47085/.
Повний текст джерелаZemánek, Miroslav. "Influence of Geometrical Parameters on Rupture Risk of Abdominal Aortic Aneurysm." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2010. http://www.nusl.cz/ntk/nusl-233934.
Повний текст джерелаTeh, Lay Seong. "Library of geometric influences for stress intensity factor weight functions." Thesis, University College London (University of London), 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.566060.
Повний текст джерелаRichards, Lynn Valerie. "Children's production of locative expressions in English : the influence of geometric and extra-geometric factors." Thesis, University of Plymouth, 2001. http://hdl.handle.net/10026.1/456.
Повний текст джерелаSouza, Walter Rauen de. "Subsolador : a influencia de parametros geometricos na distribuição das forças." [s.n.], 1989. http://repositorio.unicamp.br/jspui/handle/REPOSIP/257347.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Agricola
Made available in DSpace on 2018-07-14T03:54:29Z (GMT). No. of bitstreams: 1 Souza_WalterRauende_M.pdf: 4375688 bytes, checksum: e555ee265d29321f62bbc5d8fc94132c (MD5) Previous issue date: 1989
Mestrado
Mestre em Engenharia Agrícola
Hörberg, Thomas. "Influences of Form and Function on Spatial Relations : Establishing functional and geometric influences on projective prepositions in Swedish." Thesis, Stockholm University, Department of Linguistics, 2006. http://urn.kb.se/resolve?urn=urn:nbn:se:su:diva-6867.
Повний текст джерелаThe present work is concerned with projective prepositions, which express the relation between two objects by referring to a direction in three-dimensional space. The projective prepositions have been regarded as expressing simple schematic relations of a geometric nature. A theory of the apprehension of projective relations can account for their meanings when they express strictly geometric relations. However, many studies have shown that the appropriateness of the prepositions also depends on the functional relation between the objects and that a number of functional factors influence the comprehension of English prepositions. This experimental study investigates if the acceptability of the Swedish prepositions över, under, ovanför and nedanför are influenced by functional factors as well, and whether acceptability judgments about över and under are more sensitive to functional influences than judgments about ovanför and nedanför, as has been shown for the corresponding English prepositions over and under, and above and below, respectively. It also investigates how the shapes and the parts of the related objects influence their functional interaction, and how the acceptability of the prepositions is in consequence influenced by the shapes of the objects. It was found that the theory of apprehension can indeed account for the acceptability of the prepositions when the relation between the objects is strictly geometric. It was further found that acceptability judgments about them are influenced by functional factors in a similar manner to the corresponding English prepositions when the objects are functionally related, although judgments about under and nedanför are not differentially influenced by these factors. Furthermore, the shapes and the parts of both of the related objects influence acceptability judgments about the prepositions in predictable manners. An extension of the theory of apprehension is suggested which can account for the functional influences indicated in the present study.
Ebermann, Marko. "Influence of geometric form deviations on operating parameters in hydrodynamic bearings." Technische Universität Chemnitz, 2018. https://monarch.qucosa.de/id/qucosa%3A21225.
Повний текст джерелаWeidle, William Scott. "Influence of Trimaran Geometric Parameters on Intact and Damaged Ship Stability." Thesis, Virginia Tech, 2017. http://hdl.handle.net/10919/81101.
Повний текст джерелаMaster of Science
FILHO, GERALDO GURGEL. "INFLUENCE OF GEOMETRICAL PARAMETERS IN THE PERFORMANCE OF A CARDANICALLY SUSPENDED GYROSCOPE WITH TWO DEGREES OF FREEDOM." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1999. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=18972@1.
Повний текст джерелаThis paper evaluates the dynamic performance of a Two Axes Cardanic Gyroscope, based on the development of its equation of motion, considering possible manufacturing imprecisions or geometric variations on the expected geometry. Simulation results of a real guided vehicle system are used to compare with those obtained from the analytical model, in order to determine the origin of discrepancies. The simulation will allow the specification of manufacturing tolerances based on the needed precision of the dynamic behavior to keep small the overall cost. Special attention is dedicated to the influence of geometric parameters in the measurement accuracy of a two axes cardanic gyroscope, such as the eccentricity of the center of gravity of its rotor, when located inside a guided vehicle that experiences a high longitudinal acceleration and performs afterwards a specific manoeuvre. Two hypothesis for the analytical description will be explored, one considering the gyro rotor free in space and the other including the inner gimbals inertia and friction influences, while all components are considered rigid. This will show the need for a more precise model. An implementation Is presented, testing some geometric parameters, with the purpose of showing the results properly, in order to allow the mathematical model validation.
Книги з теми "Geometrical influences"
Psycho-geometrics: How to use geometric psychology to influence people. Englewood Cliffs, N.J: Prentice Hall, 1989.
Знайти повний текст джерелаTimo Nasseri. Die Gestalten Verlag, 2012.
Знайти повний текст джерелаMee, Nicholas. Celestial Tapestry. Oxford University Press, 2020. http://dx.doi.org/10.1093/oso/9780198851950.001.0001.
Повний текст джерелаMenahem Max Schiffer Selected Papers. Birkhauser Boston Inc, 2013.
Знайти повний текст джерелаLaunay, Jean-Pierre, and Michel Verdaguer. Basic concepts. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198814597.003.0001.
Повний текст джерелаMcMorran, Ciaran. Joyce and Geometry. University Press of Florida, 2020. http://dx.doi.org/10.5744/florida/9780813066288.001.0001.
Повний текст джерелаZydroń, Tymoteusz. Wpływ systemów korzeniowych wybranych gatunków drzew na przyrost wytrzymałości gruntu na ścinanie. Publishing House of the University of Agriculture in Krakow, 2019. http://dx.doi.org/10.15576/978-83-66602-46-5.
Повний текст джерелаЧастини книг з теми "Geometrical influences"
Fazeli Nahrekhalaji, A. R., M. Sohrabi, and S. M. Izadi. "Investigation of Influences of Wheel Speed on Root Geometrical Dimension of Gas Turbine Blade." In Proceedings of the 36th International MATADOR Conference, 101–4. London: Springer London, 2010. http://dx.doi.org/10.1007/978-1-84996-432-6_23.
Повний текст джерелаThao, Nguyen Thi Phuong, and Thieu Quang Tuan. "Influences of Geometrical and Structural Configurations on Beach and Sea-Dike Toe Scour During Storms." In APAC 2019, 401–6. Singapore: Springer Singapore, 2019. http://dx.doi.org/10.1007/978-981-15-0291-0_56.
Повний текст джерелаZago, Marco, Ilaria Cristofolini, and Sasan Amirabdollahian. "Designing Powder Metallurgy Process - The Influence of High Sintering Temperature on Dimensional and Geometrical Precision." In Lecture Notes in Mechanical Engineering, 3–8. Cham: Springer International Publishing, 2021. http://dx.doi.org/10.1007/978-3-030-70566-4_2.
Повний текст джерелаFournarakis, Philippos, and Jean Christianidis. "On Archimedes’ Pursuit Concerning Geometrical Analysis." In The Genius of Archimedes -- 23 Centuries of Influence on Mathematics, Science and Engineering, 69–81. Dordrecht: Springer Netherlands, 2010. http://dx.doi.org/10.1007/978-90-481-9091-1_6.
Повний текст джерелаVenkatesh, B., and T. Thyagaraj. "Influence of Footing Size on Reinforcement Geometrical Parameters." In Lecture Notes in Civil Engineering, 677–84. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-1831-4_60.
Повний текст джерелаShapses, Sue A., and Deeptha Sukumar. "The Hormonal Milieu in Obesity and Influences on the Trabecular, Cortical, and Geometric Properties of Bone." In Nutritional Influences on Bone Health, 43–60. London: Springer London, 2013. http://dx.doi.org/10.1007/978-1-4471-2769-7_4.
Повний текст джерелаChevalier, Margarita, Lorena Chanes, Eduardo Guibelalde, María-Ester Brandan, and Tatiana Alieva. "Influence of Geometrical Factors on Phase Contrast Fiber Images." In Digital Mammography, 334–41. Berlin, Heidelberg: Springer Berlin Heidelberg, 2010. http://dx.doi.org/10.1007/978-3-642-13666-5_45.
Повний текст джерелаZamponi, Laurent, Emmanuel Mermoz, Jean-Marc Linares, and Jean-Michel Sprauel. "Influence of Geometric Defects on Service Life." In Product Lifecycle Management, 259–72. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2013. http://dx.doi.org/10.1002/9781118557921.ch14.
Повний текст джерелаSigmund, O., T. Buhl, and C. B. W. Pedersen. "On The Influence of Geometrical Non-Linearities in Topology Optimization." In Topology Optimization of Structures and Composite Continua, 61–73. Dordrecht: Springer Netherlands, 2000. http://dx.doi.org/10.1007/978-94-010-0910-2_5.
Повний текст джерелаAminova, Asya V., and Dmitri A. Kalinin. "Geometric Quantization Of Kähler Spaces Admitting H-Projective Mappings." In Quantum Field Theory Under the Influence of External Conditions, 237–47. Wiesbaden: Vieweg+Teubner Verlag, 1996. http://dx.doi.org/10.1007/978-3-663-01204-7_43.
Повний текст джерелаТези доповідей конференцій з теми "Geometrical influences"
Ren, Yiru, and Jinwu Xiang. "Influences of Geometrical Factors on the Crashworthiness of Open Shells." In 51st AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference
18th AIAA/ASME/AHS Adaptive Structures Conference
12th. Reston, Virigina: American Institute of Aeronautics and Astronautics, 2010. http://dx.doi.org/10.2514/6.2010-2880.
Barhoumi, El Manaa, Mansour Hajji, and Boujemaa Ben Salah. "Influences analysis of geometrical parameters on propulsive force of LSRM." In 2013 10th International Multi-Conference on Systems, Signals & Devices (SSD). IEEE, 2013. http://dx.doi.org/10.1109/ssd.2013.6564048.
Повний текст джерелаWang, Yufan, Weihao Zhang*, Zhengping Zou, Shoumin Jiang, Zhenzhe Na, and Yun Chen. "Influences of Squealer Tip Geometrical Characteristics on Tip-leakage Flow in Turbine Rotor." In GPPS Xi'an21. GPPS, 2022. http://dx.doi.org/10.33737/gpps21-tc-312.
Повний текст джерелаMellmann, M., B. Ankay, E. Perras, and C. Zhang. "Influences of the geometrical nonlinearity on the complex band structures of periodic lattice frame structures." In 8th European Congress on Computational Methods in Applied Sciences and Engineering. CIMNE, 2022. http://dx.doi.org/10.23967/eccomas.2022.148.
Повний текст джерелаNeidig, Norbert, Quentin Werner, and Martin Doppelbauer. "Geometrical deviation influences of variable reluctance resolver on the inverter losses of an electrified drivetrain." In 2017 19th European Conference on Power Electronics and Applications (EPE'17 ECCE Europe). IEEE, 2017. http://dx.doi.org/10.23919/epe17ecceeurope.2017.8099190.
Повний текст джерелаZhang, Zhigang, Guanghua He, Xiaoqun Ju, and Dong Yu. "Study on Influence of Geometrical Dimensions of Floating Bodies on Cloaking Phenomenon." In ASME 2016 35th International Conference on Ocean, Offshore and Arctic Engineering. American Society of Mechanical Engineers, 2016. http://dx.doi.org/10.1115/omae2016-54783.
Повний текст джерелаNagasaka, Imao, Jun Liu, Yukio Ishida, and Kouta Katou. "Forced Vibrations of Continuous Rotor With Strong Geometrical Nonlinearity." In ASME 2003 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. ASMEDC, 2003. http://dx.doi.org/10.1115/detc2003/vib-48403.
Повний текст джерелаvon Plehwe, Felix C., Benedikt Brox, Corina Schwitzke, and Hans-Jörg Bauer. "Experimental Investigation of the Influence of Chamber Geometry on Bearing Chamber Oil Leakage." In ASME Turbo Expo 2017: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/gt2017-63561.
Повний текст джерелаWu, D. C., D. W. Cameron, and D. W. Hoeppner. "Observations of Microstructural and Geometrical Influences on Fatigue Crack Growth in Single Crystal and Polycrystal Nickel-Base Alloys." In Superalloys. TMS, 1988. http://dx.doi.org/10.7449/1988/superalloys_1988_605_614.
Повний текст джерелаSAITO, SATOKO, YASUHIRO KAKINUMA, TOJIRO AOYAMA, KATSUTOSHI TANAKA, and HIDENOBU ANZAI. "THE INFLUENCES OF THE MATERIAL AND GEOMETRICAL PROPERTIES OF SLIDING PLATE ON ER EFFECT OF GEL-STRUCTURED ERF." In Proceedings of the 10th International Conference on ERMR 2006. WORLD SCIENTIFIC, 2007. http://dx.doi.org/10.1142/9789812771209_0002.
Повний текст джерелаЗвіти організацій з теми "Geometrical influences"
Kruger, S. E., C. C. Hegna, and J. D. Callen. Geometrical influences on neoclassical magnetohydrodynamic tearing modes. Office of Scientific and Technical Information (OSTI), July 1997. http://dx.doi.org/10.2172/532612.
Повний текст джерелаLittle, Charles, and David Biedenharn. Technical assessment of the Old, Mississippi, Atchafalaya, and Red (OMAR) Rivers : channel geometry analysis. Engineer Research and Development Center (U.S.), August 2022. http://dx.doi.org/10.21079/11681/45147.
Повний текст джерелаWilson, D., Matthew Kamrath, Caitlin Haedrich, Daniel Breton, and Carl Hart. Urban noise distributions and the influence of geometric spreading on skewness. Engineer Research and Development Center (U.S.), November 2021. http://dx.doi.org/10.21079/11681/42483.
Повний текст джерелаUkkusuri, Satish, Lu Ling, Tho V. Le, and Wenbo Zhang. Performance of Right-Turn Lane Designs at Intersections. Purdue University, 2021. http://dx.doi.org/10.5703/1288284317277.
Повний текст джерелаGantzer, Clark J., Shmuel Assouline, and Stephen H. Anderson. Synchrotron CMT-measured soil physical properties influenced by soil compaction. United States Department of Agriculture, February 2006. http://dx.doi.org/10.32747/2006.7587242.bard.
Повний текст джерелаShen, Yanfei, Rolando Chacon, Itsaso Arrayago, and Esther Real. ON THE INFLUENCE OF INITIAL GEOMETRIC IMPERFECTIONS AND SECOND ORDER EFFECTS ON THE STRUCTURAL BEHAVIOR OF AUSTENITIC STAINLESS STEEL FRAMES. The Hong Kong Institute of Steel Construction, December 2018. http://dx.doi.org/10.18057/icass2018.p.070.
Повний текст джерелаPulugurtha, Srinivas S., Sarvani Duvvuri, and Sonu Mathew. Risk Factors Associated with Crash Injury Severity Involving Trucks. Mineta Transportation Institute, June 2022. http://dx.doi.org/10.31979/mti.2022.2117.
Повний текст джерелаIMPERFECTION SENSITIVITY OF NON-TRIANGULATED CYLINDRICAL SHELL CONFIGURATIONS. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.280.
Повний текст джерелаINFLUENCE OF RANDOM GEOMETRICAL IMPERFECTION ON THE STABILITY OF SINGLE-LAYER RETICULATED DOMES WITH SEMI-RIGID CONNECTION. The Hong Kong Institute of Steel Construction, March 2019. http://dx.doi.org/10.18057/ijasc.2019.15.1.12.
Повний текст джерелаSTUDY ON THE STATIC BEHAVIOR OF COLD-FORMED STEEL FABRICATED BEAM-COLUMN JOINT. The Hong Kong Institute of Steel Construction, August 2022. http://dx.doi.org/10.18057/icass2020.p.310.
Повний текст джерела