Добірка наукової літератури з теми "Gene copy stability"

We have compared clones of Syrian hamster cells selected for the first amplification of the CAD gene with clones selected for further amplification. The large domain amplified initially was not reamplified as an intact unit. Instead, subregions were reamplified preferentially, and parts of the initial array were often lost. These events reduced the average amount of coamplified DNA accompanying each copy of the selected gene. The degree of amplification was small in the first step (about three extra copies of CAD per cell), but second-step amplifications to a high copy number (up to 60 extra copies per cell) occurred frequently. After several separate steps of amplification, highly condensed arrays that brought many CAD genes close together were formed. In striking contrast to the stability of these highly amplified arrays, the low-copy chromosomal arrays formed early were quite unstable and were often lost completely within 1 or 2 months of growth without selection. The results suggest that different mechanisms may be involved in the first step of amplification and in the later evolution of an already amplified array.

We have compared clones of Syrian hamster cells selected for the first amplification of the CAD gene with clones selected for further amplification. The large domain amplified initially was not reamplified as an intact unit. Instead, subregions were reamplified preferentially, and parts of the initial array were often lost. These events reduced the average amount of coamplified DNA accompanying each copy of the selected gene. The degree of amplification was small in the first step (about three extra copies of CAD per cell), but second-step amplifications to a high copy number (up to 60 extra copies per cell) occurred frequently. After several separate steps of amplification, highly condensed arrays that brought many CAD genes close together were formed. In striking contrast to the stability of these highly amplified arrays, the low-copy chromosomal arrays formed early were quite unstable and were often lost completely within 1 or 2 months of growth without selection. The results suggest that different mechanisms may be involved in the first step of amplification and in the later evolution of an already amplified array.

In the current study, we screened a collection of coagulase-negative staphylococci (CoNS) isolates for orthologues of staphylococcal enterotoxins (SEs) involved in S. aureus-related staphylococcal food poisoning (SFP). The amplicons corresponding to SEs were detected in S. chromogenes, S. epidermidis, S. haemolyticus, S. borealis, S. pasteuri, S. saprophyticus, S. vitulinus, S. warneri, and S. xylosus. All amplicons were sequenced and identified as parts of known S. aureus or S. epidermidis SE genes. Quantitative real-time PCR allowed determining the relative copy number of each SE amplicon. A significant portion of the amplicons of the sea, seb, sec, and seh genes occurred at low copy numbers. Only the amplicons of the sec gene identified in three isolates of S. epidermidis displayed relative copy numbers comparable to sec in the reference enterotoxigenic S. aureus and S. epidermidis strains. Consecutive passages in microbiological media of selected CoNS isolates carrying low copy numbers of sea, seb, sec, and seh genes resulted in a decrease of gene copy number. S. epidermidis isolates harbored a high copy number of sec, which remained stable over the passages. We demonstrated that enterotoxin genes may occur at highly variable copy numbers in CoNS. However, we could identify enterotoxin genes only in whole-genome sequences of CoNS carrying them in a stable form at high copy numbers. Only those enterotoxins were expressed at the protein level. Our results indicate that PCR-based detection of enterotoxin genes in CoNS should always require an additional control, like analysis of their presence in the bacterial genome. We also demonstrate S. epidermidis as a CoNS species harboring SE genes in a stable form at a specific chromosome site and expressing them as a protein.

ABSTRACT Heterologous protein production can be doubled by increasing the copy number of the corresponding heterologous gene. We constructed a host-vector system in the yeast Kluyveromyces lactis that was able to induce copy number amplification of pKD1 plasmid-based vectors upon expression of an integrated copy of the plasmid recombinase gene. We increased the production and secretion of two heterologous proteins, glucoamylase from the yeast Arxula adeninivorans and mammalian interleukin-1β, following gene dosage amplification when the heterologous genes were carried by pKD1-based vectors. The choice of the promoters for expression of the integrated recombinase gene and of the episomal heterologous genes are critical for the mitotic stability of the host-vector system.

ABSTRACT A major limitation to improving small-molecule pharmaceutical production in streptomycetes is the inability of high-copy-number plasmids to tolerate large biosynthetic gene cluster inserts. A recent finding has overcome this barrier. In 2003, Hu et al. discovered a stable, high-copy-number, 81-kb plasmid that significantly elevated production of the polyketide precursor to the antibiotic erythromycin in a heterologous Streptomyces host (J. Ind. Microbiol. Biotechnol. 30:516-522, 2003). Here, we have identified mechanisms by which this SCP2*-derived plasmid achieves increased levels of metabolite production and examined how the 45-bp deletion mutation in the plasmid replication origin increased plasmid copy number. A plasmid intramycelial transfer gene, spd, and a partition gene, parAB, enhance metabolite production by increasing the stable inheritance of large plasmids containing biosynthetic genes. Additionally, high product titers required both activator (actII-ORF4) and biosynthetic genes (eryA) at high copy numbers. DNA gel shift experiments revealed that the 45-bp deletion abolished replication protein (RepI) binding to a plasmid site which, in part, supports an iteron model for plasmid replication and copy number control. Using the new information, we constructed a large high-copy-number plasmid capable of overproducing the polyketide 6-deoxyerythronolide B. However, this plasmid was unstable over multiple culture generations, suggesting that other SCP2* genes may be required for long-term, stable plasmid inheritance.

SummaryWe constructed a cloning vector (pMT603) based on the low copy number plasmid SCP2*. pMT6O3 is unstable because it lacks the SCP2* stability region and carries the selectable marker thiostrepton-resistance and a tyrosinase gene which results in melanin production. This allows easy testing of plasmid stability and we demonstrated its usefulness by cloning a plasmid stability function.

g10evo-epsps is a novel glyphosate herbicide-resistant gene that has been transferred to various crops such as soybean, corn, cotton, and rice. Here, we developed a gene-specific digital Polymerase Chain Reaction (dPCR) detection method for absolute quantitative analysis of g10evo-epsps, and characterized g10evo-epsps certified reference materials (CRM) using ZUTS-33 soybean powder as the candidate material. Stability tests of matrix CRMs demonstrate that these CRMs can be stored stably for 6 months and transported for 10 days at room temperature and withstand summer high temperatures (below 60 °C). CRM characterization is based on the copy number ratio of g10evo-epsps to lectin. Eight qualified laboratories independently validated the CRM using dPCR method, with a measurement of 0.98 (copy/copy) and an extended uncertainty of 0.08 (copy/copy). The g10evo-epsps matrix CRM described here may be used for qualitative and quantitative testing, method evaluation, laboratory quality control, and other related fields.

Development of potato cultivars with high levels of broad spectrum resistance is a key long-term management strategy against late blight disease caused by Phytophthora infestans. Six progeny lines of hybridization between transgenic potato Katahdin SP951 with non-transgenic Granola and Atlantic were selected based on agronomical characteristics and resistance to late blight disease. The study aimed to analyze the number of insertions and stability of inserted RB gene in the transgenic potato lines. The research was carried out through plant DNA extraction, southern blot analysis and polymerase chain reaction (PCR). Southern blot analysis was used to detect the number of inserts integrated into potato genome, while PCR analysis was used to detect stability of RB gene from generation to generation. The results showed that the progenies obtained from hybridization between Atlantic and transgenic Katahdin SP951 (lines No. 20 and 27) and between Granola and transgenic Katahdin SP951 (line No. 69) contained one copy number of RB gene, according to the probing of nptII. The result is similar to that of inserted RB gene found in the parental transgenic Katahdin SP951. The presence of RB gene in four different generations (G0, G1, G2 and G3) showed stable integration of the gene into the plant genome. The single copy number of RB gene will repress the occurrence of silencing gene expression. The stability analysis of RB gene can determine that the gene is still present in plant genome after several generations.

Development of potato cultivars with high levels of broad spectrum resistance is a key long-term management strategy against late blight disease caused by Phytophthora infestans. Six progeny lines of hybridization between transgenic potato Katahdin SP951 with non-transgenic Granola and Atlantic were selected based on agronomical characteristics and resistance to late blight disease. The study aimed to analyze the number of insertions and stability of inserted RB gene in the transgenic potato lines. The research was carried out through plant DNA extraction, southern blot analysis and polymerase chain reaction (PCR). Southern blot analysis was used to detect the number of inserts integrated into potato genome, while PCR analysis was used to detect stability of RB gene from generation to generation. The results showed that the progenies obtained from hybridization between Atlantic and transgenic Katahdin SP951 (lines No. 20 and 27) and between Granola and transgenic Katahdin SP951 (line No. 69) contained one copy number of RB gene, according to the probing of nptII. The result is similar to that of inserted RB gene found in the parental transgenic Katahdin SP951. The presence of RB gene in four different generations (G0, G1, G2 and G3) showed stable integration of the gene into the plant genome. The single copy number of RB gene will repress the occurrence of silencing gene expression. The stability analysis of RB gene can determine that the gene is still present in plant genome after several generations.

Transgene expression in stably transgenic organisms is affected by many factors, including the copy number of the transgene in the genome and by interactions between the transgene and flanking DNA sequences. Very high transgene copy number has also been shown to affect genetic stability in transgenic plants and animals. Two commonly used methods for transfecting cells prior to their use in nuclear transfer (NT) are liposome-mediated transfection and electroporation. Little is known about the transgene copy number or variability of the copy number with these techniques. The objective of this study was to determine transgene copy number after liposome-mediated transfection and electroporation. The mean transgene copy number and variability between individual integration events have been determined. Q-PCR conditions were optimized for primer annealing temperature and concentration when amplifying a region of a plasmid expressing green fluorescent protein (GFP) under the control of the human elongation factor (hEF) promoter (hEFGFP) used for transfection. The quantitative nature of the Q-PCR reaction was confirmed by amplifying 10-fold dilutions of the plasmid and plotting the threshold cycle (CT) value against the log of the plasmid concentration. A correlation coefficient of 1.00 and a calculated PCR efficiency of 93.3% were obtained from this analysis. Caprine fibroblasts were transfected by electroporation with 20 μg of DNA or FuGENE® HD (Roche, Nutley, NJ, USA) reagent with 6 μg of DNA using either a circular or linearized hEFGFP plasmid. Transformed cells were plated at low density in medium containing Geneticin® (Gibco, Grand Island, NY USA). After 10 days of culture, single-cell colonies were isolated and expanded. When cultures reached 1 to 2 million cells, genomic DNA was isolated. Transgene copy number was determined by amplifying genomic DNA from individual clones representing 1 × 105 cells with Q-PCR. Transgene copy number was calculated from a standard curve of the transgene plasmid. The mean transgene copy number for electroporation circular was 2.7 ± 0.75 (n = 32 colonies) and 1.3 ± 0.65 (n = 19) when using a linear DNA construct. FuGENE HD using a circular plasmid construct generated a mean gene copy number of 0.5 ± 0.11 (n = 14) and 0.64 ± 0.13 (n = 16) for the linear plasmid construct. One-way ANOVA followed by multiple pair-wise comparisons using Tukey’s method showed significant differences when comparing electroporation circular to all other treatments. However, there were no differences when comparing electroporation linear, FuGENE HD circular, and FuGENE HD linear to each other. Because the calculated mean copy number for transfection with FuGENE HD was consistently less than 1, it is assumed that these colonies consisted predominantly of single-copy integrations. Our results indicate that the transfection method can affect gene copy number. Electroporation resulted in multiple but few copies whereas Fugene HD resulted in predominantly single-copy integrations. The probability of transgene mutation with single-copy integration suggests that electroporation is preferable forproducing transgenic animals by NT.

DNA microarray has become a powerful tool in genetics, molecular biology, and biomedical research. DNA microarray can be used for measuring the genotypes, structural changes, and gene expressions of human genomes. Detection and characterization of multilevel, high-throughput microarray genomic data pose new challenges to statistical pattern recognition and machine learning research. In this dissertation, we propose novel computational methods for analyzing DNA copy number changes and learning the trees of phenotypes using DNA microarray data. DNA copy number change is an important form of structural variations in human genomes. The copy number signals measured by high-density DNA microarrays usually have low signal-to-noise ratios and complex patterns due to inhomogeneous composition of tissue samples. We propose a robust detection method for extracting copy number changes in a single signal profile and consensus copy number changes in the signal profiles of a population. We adapt a solution-path algorithm to efficiently solve the optimization problems associated with the proposed method. We tested the proposed method on both simulation and real CGH and SNP microarray datasets, and observed competitively improved performance as compared to several widely-adopted copy number change detection methods. We also propose a chromosome instability measure to summarize the extracted copy number changes for assessing chromosomal instabilities of tumor genomes. The proposed measure demonstrates distinct patterns between different subtypes of ovarian serous carcinomas and normal samples. Among active research on complex human diseases using genomic data, little effort and progress have been made in discovering the relational structural information embedded in the molecular data. We propose two stability analysis based methods to learn stable and highly resolved trees of phenotypes using microarray gene expression data of heterogeneous diseases. In the first method, we use a hierarchical, divisive visualization approach to explore the tree of phenotypes and a leave-one-out cross validation to select stable tree structures. In the second method, we propose a node bandwidth constraint to construct stable trees that can balance the descriptive power and reproducibility of tree structures. Using a top-down merging procedure, we modify the binary tree structures learned by hierarchical group clustering methods to achieve a given node bandwidth. We use a bootstrap based stability analysis to select stable tree structures under different node bandwidth constraints. The experimental results on two microarray gene expression datasets of human diseases show that the proposed methods can discover stable trees of phenotypes that reveal the relationships between multiple diseases with biological plausibility.
Ph. D.

Hordeum glaucum Steud. is a major grass weed in South Australia in crops and pastures across the agricultural region. Control of this grass species has become a problem in recent decades as a consequence of the evolution of herbicide-resistance to several of the herbicides frequently used. Glyphosate is used for non-selective control of Hordeum species in non-cropped situations, such as fence lines and crop margins, and is also used effectively for pre-sowing knockdown control or spray-topping to stop seed set of Hordeum species in pastures. The repeated use of glyphosate has resulted in the evolution of resistance to glyphosate in this species. Glyphosate resistant H. glaucum populations were found along fence lines and around stockyards after more than a decade of repeated herbicide application. This study was undertaken to characterise resistance in these populations and investigate the mechanisms responsible for glyphosate resistance. Better understanding of the evolution of resistance to glyphosate in H. glaucum will improve resistance management strategies to delay or prevent resistance evolution in this species. Glyphosate resistant H. glaucum populations were collected from non-cropped areas along fence lines and stockyards in the years 2016, 2017 respectively with a subsequent collection in 2019 from the same farm. In a series of dose-response experiments the resistance level of the suspected resistant populations (YP-16, YP-17 and YP-19) and susceptible populations (RW, TW and YN) were investigated. These confirmed glyphosate resistance in these populations with resistance level of 2.8 to 6.6- fold higher than the susceptible populations as determined by ratio of their LD50 values. Screening of these populations for mechanisms conferring resistance showed no differences in glyphosate absorption and translocation that could account for resistance and no mutation in the EPSPS gene. However, 9-12 fold increase in EPSPS gene copy number in the resistant populations compared to the susceptible was observed, which is likely to be the basis of resistance in these resistant populations. The mechanism of gene amplification is known to be influenced by selection pressure and therefore unstable. A study was conducted to determine whether glyphosate selection could alter copy number in H. glaucum populations and in their subsequent progenies. Clones were generated from individual plants by splitting plants into two and applying glyphosate on one of the clones of each plant. Results showed that progenies of H. glaucum clones exposed to one cycle of glyphosate selection had higher EPSPS gene copies and increased resistance to glyphosate compared the untreated clones. LD50 values of treated clones increased by 75% to 79% compared to the untreated clones. Similarly, gene copy numbers of the treated clones increased from 1.5 to 4- fold that of the untreated clones. This suggests that this species responds rapidly to glyphosate selection pressure through increased EPSPS copy number and continued application of glyphosate will increase the level of resistance. A study into the inheritance pattern of glyphosate resistance in H. glaucum found no evidence of a single-gene Mendelian inheritance pattern. F2 individuals had gene copy numbers ranging from the same as the susceptible parent to more than the resistant parent with no obvious pattern. Elevated EPSPS gene copies were observed in F2 individuals following glyphosate treatment which may likely influence spread and persistence of resistance. Results from this study confirm EPSPS gene amplification is the molecular basis of resistance in glyphosate resistant H. glaucum. Amplified gene copies in H. glaucum are unstable and increases with glyphosate selection and resistance inheritance is complex and non-Mendelian.
Thesis (Ph.D.) -- University of Adelaide, School of Agriculture, Food and Wine, 2021

AbstractRice is a staple food for more than half of the global population. With the increasing population, the yield of rice must correspondingly increase to fulfill the requirement. Rice is cultivated worldwide in four different types of ecosystems, which are limited by the availability of irrigation water. However, water-limiting conditions negatively affect rice production; therefore, to enhance productivity under changing climatic conditions, improved cultivation practices and drought-tolerant cultivars/varieties are required. There are two basic approaches to cultivation: (1) plant based and (2) soil and irrigation based, which can be targeted for improving rice production. Crop plants primarily follow three mechanisms: drought escape, avoidance, and tolerance. Based on these mechanisms, different strategies are followed, which include cultivar selection based on yield stability under drought. Similarly, soil- and irrigation-based strategies consist of decreasing non-beneficial water depletions and water outflows, aerobic rice development, alternate wetting and drying, saturated soil culture, system of rice intensification, and sprinkler irrigation. Further strategies involve developing drought-tolerant cultivars through marker-assisted selection/pyramiding, genomic selection, QTL mapping, and other breeding and cultivation practices such as early planting to follow escape strategies and decreasing stand density to minimize competition with weeds. Similarly, the identification of drought-responsive genes and their manipulation will provide a technological solution to overcome drought stress. However, it was the Green Revolution that increased crop production. To maintain the balance, there is a need for another revolution to cope with the increasing demand.