Статті в журналах з теми "Gas manufacture and works By-products"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Gas manufacture and works By-products".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Saparudin, Muhammad Agus, Rizal Justian Setiawan, Eko Budi, Aji Puspito, and Imam Fauzi. "DESIGN AND MANUFACTURE OF BAMBOO HANDICRAFT DRYER MACHINE BASED ON LPG GAS." Tadulako Science and Technology Journal 2, no. 1 (August 12, 2021): 01–09. http://dx.doi.org/10.22487/sciencetech.v2i1.15555.
Повний текст джерелаMagerramova, L. A., Yu A. Nozhnitsky, S. A. Volkov, M. E. Volkov, V. Zh Chepurnov, S. V. Belov, I. S. Verbanov, and S. V. Zaikin. "Prospects of application of additive technologies to develop parts and components of gas turbine engines and ramjets." VESTNIK of Samara University. Aerospace and Mechanical Engineering 18, no. 3 (October 31, 2019): 81–98. http://dx.doi.org/10.18287/2541-7533-2019-18-3-81-98.
Повний текст джерелаSatria, Eko, Melany Febrina, Mitra Djamal, Wahyu Srigutomo, and Martin Liess. "CO2 Thermal Conductivity Detection in Gas Mixture for Concentration Measurement Using Bridge Configuration of Thermopiles." Science and Technology Indonesia 7, no. 4 (October 31, 2022): 443–48. http://dx.doi.org/10.26554/sti.2022.7.4.443-448.
Повний текст джерелаKokoev, M. N., V. T. Fedorov, and G. N. Hadgishalapov. "WIND ENERGY IN THE MANUFACTURE OF PENOSTEKL AND KERAMZIT." Herald of Dagestan State Technical University. Technical Sciences 46, no. 1 (July 16, 2019): 187–94. http://dx.doi.org/10.21822/2073-6185-2019-46-1-187-194.
Повний текст джерелаШоринов, Александр Владимирович. "ПЕРСПЕКТИВЫ ПРИМЕНЕНИЯ ТЕХНОЛОГИИ ХОЛОДНОГО ГАЗОДИНАМИЧЕСКОГО НАПЫЛЕНИЯ ДЛЯ ЗАЩИТЫ И ВОССТАНОВЛЕНИЯ ДЕТАЛЕЙ ИЗ МАГНИЕВЫХ СПЛАВОВ". Aerospace technic and technology, № 2 (26 квітня 2018): 20–27. http://dx.doi.org/10.32620/aktt.2018.2.03.
Повний текст джерелаBiantoro, Agung Wahyudi. "GLEDS (Gas Leakage Early Detection System) PROTOTYPE FOR EARLY DETECTION OF GAS LEAKS BASED ON MICROCONTROLLER ON MOTOR VEHICLES." Jurnal Teknik Mesin 9, no. 1 (July 28, 2020): 1. http://dx.doi.org/10.22441/jtm.v9i1.5990.
Повний текст джерелаDaviend Benaya Nugroho, Tandya, Albert Gunadhi, Evelyn Raguindin, and Hartono Pranjoto. "Tire Pressure and the Availability of Gasoline Monitoring Tools Based on IOT." E3S Web of Conferences 188 (2020): 00024. http://dx.doi.org/10.1051/e3sconf/202018800024.
Повний текст джерелаKubik, John, Grant Shaw, and Melissa Vicario. "Unlocking Gippsland reserves with a minimum kit solution – West Barracouta." APPEA Journal 62, no. 2 (May 13, 2022): S137—S141. http://dx.doi.org/10.1071/aj21143.
Повний текст джерелаAlina, A. A., V. Y. Kulikov, P. V. Kovalev, and A. M. Dostayeva. "Study of thermal resistance of cold mixtures with clay addition." Kompleksnoe ispolʹzovanie mineralʹnogo syrʹâ/Complex Use of Mineral Resources/Mineraldik shikisattardy Keshendi Paidalanu 316, no. 1 (March 15, 2021): 91–97. http://dx.doi.org/10.31643/2021/6445.11.
Повний текст джерелаSych, Oleh, Andrii Kornienko, and Nadiia Yevtushenko. "FORENSIC INVESTIGATION OF OXYGENATES IN MOTOR TYPES OF GASOLINE." Criminalistics and Forensics, no. 67 (August 9, 2022): 396–409. http://dx.doi.org/10.33994/kndise.2022.67.40.
Повний текст джерелаZhang, Jin, and Qiong Xu. "Probing Element Transfer Behavior during the Submerged Arc Welding Process for CaF2-SiO2-Na2O-Cr2O3 Agglomerated Fluxes: A Thermodynamic Approach." Processes 10, no. 10 (September 20, 2022): 1900. http://dx.doi.org/10.3390/pr10101900.
Повний текст джерелаAgarkov, Olexander, Kostyantyn Shevchuk, and Yurii Ivanyna. "APPLICATION OF RANGE EXTENDER BASED ON SOLID OXIDE FUEL CELLS (SOFCS) FOR ELECTRICAL BUSES: EXPERIENCE OF CERES POWER (UNITED KINGDOM) AND WEICHAI POWER (CHINA) COMPANIES." Avtoshliakhovyk Ukrayiny, no. 2 (266) ’ 2021 (June 20, 2021): 22–28. http://dx.doi.org/10.33868/0365-8392-2021-2-266-22-28.
Повний текст джерелаJauregui-Vazquez, Daniel, Paulina Lozano-Sotomayor, Jorge Emmanuel Mejía-Benavides, and Erik Díaz-Cervantes. "Binding Analysis of Functionalized Multimode Optical-Fiber Sandwich-like Structure with Organic Polymer and Its Sensing Application for Humidity and Breath Monitoring." Biosensors 11, no. 9 (September 8, 2021): 324. http://dx.doi.org/10.3390/bios11090324.
Повний текст джерелаПедаш, Алексей Александрович, Владимир Валериевич Клочихин, Тамара Александровна Митина та Валерий Григорьевич Шило. "ВПЛИВ ТЕХНОЛОГІЙ ПІДВЕДЕННЯ ЕНЕРГІЇ ПРИ 3D-ПРИНТИНГУ НА СТРУКТУРУ ТА ВЛАСТИВОСТІ ДЕТАЛЕЙ ЗІ СПЛАВУ Ti-6Al-4V". Aerospace technic and technology, № 8 (25 грудня 2018): 86–90. http://dx.doi.org/10.32620/aktt.2018.8.13.
Повний текст джерелаPanov, V. S., V. Y. Lopatin, O. V. Myakisheva, J. V. Eremeeva, E. V. Ageev, T. M. Aldayarov, and A. I. Lizunov. "A REVIEW OF MODIFYING AGENTS USE TO IMPROVE NUCLEAR FUEL PERFORMANCE IN THE REACTORE CORE." Proceedings of the Southwest State University 21, no. 2 (April 28, 2017): 48–59. http://dx.doi.org/10.21869/2223-1560-2017-21-2-48-59.
Повний текст джерелаKuznetsov, Viktor, Dmitry Bohdan, Yan Beygelzimer, Valeriy Balakin, and Eugene Kuznetsow. "IMPROVING STRENGTH OF HOT-ROLLED PIPES IN OIL AND GAS PIPELINE TRANSPORTATION SYSTEMS AND HEAT SUPPLY SYSTEMS." Metallurgicheskaya i gornorudnaya promyshlennost, no. 1 (March 30, 2020): 3–13. http://dx.doi.org/10.34185/0543-5749.2020-1-3-13.
Повний текст джерелаCeleiro, Lamas, Arcas, and Lores. "Antioxidants Profiling of By-Products from Eucalyptus Greenboards Manufacture." Antioxidants 8, no. 8 (August 1, 2019): 263. http://dx.doi.org/10.3390/antiox8080263.
Повний текст джерелаBeilin, I. L. "Economic assessment of industrial development of the oil and gas region by return on assets of organizations and profitability of products." Russian Journal of Industrial Economics 15, no. 4 (January 2, 2023): 442–52. http://dx.doi.org/10.17073/2072-1633-2022-4-442-452.
Повний текст джерелаZade, Shanti Kiran, Suresh Babu V., and Sai Srinadh K.V. "Effect of nanoclay, glass fiber volume and orientation on tensile strength of epoxy-glass composite and optimization using Taguchi method." World Journal of Engineering 15, no. 2 (April 9, 2018): 312–20. http://dx.doi.org/10.1108/wje-08-2017-0286.
Повний текст джерелаMezulis, A., A. Safronov, J. Guzeyeva, and J. Begens. "Computer Simulation to Optimize the VFA Alpha Prototype with a Hydraulic Piston Compressor and an Integrated Booster." Latvian Journal of Physics and Technical Sciences 57, no. 5 (October 1, 2020): 5–17. http://dx.doi.org/10.2478/lpts-2020-0023.
Повний текст джерелаA, JAWORSKI, JAREMCIO M, LEJDA K, MĄDZIEL M, and WOŚ P. "CHARACTERISTICS OF SELECTED DRIVING CYCLES USED FOR EXHAUST EMISSIONS MEASUREMENT FROM PASSENGER CAR ENGINES." National Transport University Bulletin 1, no. 50 (2021): 67–80. http://dx.doi.org/10.33744/2308-6645-2021-3-50-067-080.
Повний текст джерелаМисюров, Александр, Aleksandr Misyurov, Александр Богданов, Aleksandr Bogdanov, Алексей Соловьев, Aleksey Soloviyev, Игорь Ильичев, et al. "Additive laser techniques of metal powder fritting to manufacture products of aerospace industry." Science intensive technologies in mechanical engineering 1, no. 9 (August 23, 2016): 24–29. http://dx.doi.org/10.12737/21236.
Повний текст джерелаKuts, G. O., and O. I. Teslenko. "Methodical provisions on the distribution of total technological energy resources between separate types of outputs of multi-product manufacture." Problems of General Energy 2020, no. 4 (December 22, 2020): 58–62. http://dx.doi.org/10.15407/pge2020.04.058.
Повний текст джерелаIuvshin, A. M., S. D. Tretyakov, Y. S. Andreev, and I. N. Gibadullin. "Thermoplastic Polymer Composites Production by Automated Fiber Placement Method." Key Engineering Materials 836 (March 2020): 78–83. http://dx.doi.org/10.4028/www.scientific.net/kem.836.78.
Повний текст джерелаCatarino, Mariana Garcez. "Article Modelase by Fajate – Direct Sale and manufacture products directly from industry to consumer." International Journal of Advanced Engineering Research and Science 9, no. 3 (2022): 170–75. http://dx.doi.org/10.22161/ijaers.93.22.
Повний текст джерелаVoskobiynyk, S. P. "FIBRE-REINFORCED POLYMER BARS IN PRECAST SLABS FOR ROADS TO OIL AND GAS EXTRACTION COMPLEXES." ACADEMIC JOURNAL Series: Industrial Machine Building, Civil Engineering 1, no. 48 (March 27, 2017): 121–28. http://dx.doi.org/10.26906/znp.2017.48.785.
Повний текст джерелаPetrov, M. A., Y. L. Bast, P. A. Petrov, and A. A. Sheypak. "Modern methods of hollow metal microsphere manufacture." Izvestiya MGTU MAMI 6, no. 2-2 (March 20, 2012): 144–50. http://dx.doi.org/10.17816/2074-0530-68482.
Повний текст джерелаLei, Hong Jun, Qiao Li Zhang, Chang Jia Li, Bei Dou Xi, and Xun Feng Xia. "Factor Analysis on the Industrial Environmental Efficiency and Energy Utilization Efficiency of China by DEA Method." Applied Mechanics and Materials 209-211 (October 2012): 1620–26. http://dx.doi.org/10.4028/www.scientific.net/amm.209-211.1620.
Повний текст джерелаCui, Xiao Peng, Yong Bing Liu, Zhan Yi Cao, Xiao Hong Yang, and Wei Liang. "Influence of Process Conditions of Thixomolding® on the Microstructure of Magnesium Mobile Phone Housing." Materials Science Forum 488-489 (July 2005): 377–80. http://dx.doi.org/10.4028/www.scientific.net/msf.488-489.377.
Повний текст джерелаPeinador, René I., Oumaima Abba, and José I. Calvo. "Characterization of Commercial Gas Diffusion Layers (GDL) by Liquid Extrusion Porometry (LEP) and Gas Liquid Displacement Porometry (GLDP)." Membranes 12, no. 2 (February 11, 2022): 212. http://dx.doi.org/10.3390/membranes12020212.
Повний текст джерелаTyukhtenko, Nataliya Anatoliivna, Serhii Mykolaiovych Makarenko, and Nataliia Mykolaivna Oliinyk. "INCREASING COMPETITIVENESS OF THE ENTERPRISE BY IMPROVING LOGISTIC STRATEGY OF DISTRIBUTION OF PRODUCTION AND SUPPLY OF RAW MATERIALS." SCIENTIFIC BULLETIN OF POLISSIA 1, no. 2(14) (March 1, 2018): 56–63. http://dx.doi.org/10.25140/2410-9576-2018-2-2(14)-56-63.
Повний текст джерелаZhang, Ke, Ju Ping Ren, Hua Guo, Yu Hou Wu, and Kai Jun Zhao. "Crossbeam Analysis and Structure Optimization of Special-Shaped Stone Combined Machining Center." Advanced Materials Research 102-104 (March 2010): 620–24. http://dx.doi.org/10.4028/www.scientific.net/amr.102-104.620.
Повний текст джерелаNovikova, O. "Qing monochrome porcelain from the Collection of the Bohdan and Varvara Khanenko National Museum of Arts." Research and methodological works of the National Academy of Visual Arts and Architecture, no. 27 (February 27, 2019): 168–77. http://dx.doi.org/10.33838/naoma.27.2018.168-177.
Повний текст джерелаBeale, Sam. "Precision engineering for future propulsion and power systems: a perspective from Rolls-Royce." Philosophical Transactions of the Royal Society A: Mathematical, Physical and Engineering Sciences 370, no. 1973 (August 28, 2012): 4130–53. http://dx.doi.org/10.1098/rsta.2011.0162.
Повний текст джерелаSol-Sánchez, M., F. Moreno-Navarro, M. C. Rubio-Gámez, V. Pérez-Mena, and P. Cabanillas. "Reuse of Zeolite By-Products Derived from Petroleum Refining for Sustainable Roads." Advances in Materials Science and Engineering 2019 (May 2, 2019): 1–10. http://dx.doi.org/10.1155/2019/4256989.
Повний текст джерелаEfremov, Dmitry, Alla Gerasimova, Nikita Kislykh, and Cristina Shaibel. "Additive Technology Methods for Manufacturing Permanent Magnets." MATEC Web of Conferences 346 (2021): 01010. http://dx.doi.org/10.1051/matecconf/202134601010.
Повний текст джерелаSripriyan, K., and M. Ramu. "Analysis of weld bead characteristics on GMAW by changing wire electrode geometry." Journal of Achievements in Materials and Manufacturing Engineering 78, no. 2 (October 3, 2016): 49–58. http://dx.doi.org/10.5604/01.3001.0010.1494.
Повний текст джерелаButt, Javaid, Yasasween Hewavidana, Vahaj Mohaghegh, Shabnam Sadeghi-Esfahlani, and Hassan Shirvani. "Hybrid Manufacturing and Experimental Testing of Glass Fiber Enhanced Thermoplastic Composites." Journal of Manufacturing and Materials Processing 3, no. 4 (December 2, 2019): 96. http://dx.doi.org/10.3390/jmmp3040096.
Повний текст джерелаKovalev, Oleg. "Comparative analysis of performance characteristics of nozzle heads for powder transportation in a laser cladding and direct material deposition." MATEC Web of Conferences 224 (2018): 01041. http://dx.doi.org/10.1051/matecconf/201822401041.
Повний текст джерелаQiao, Zhe, Xue Feng She, Jing Song Wang, and Qing Guo Xue. "Current State of Gas Resource Utilization and Countermeasures of Energy Saving for Integrated Iron and Steel Works in China." Advanced Materials Research 849 (November 2013): 165–69. http://dx.doi.org/10.4028/www.scientific.net/amr.849.165.
Повний текст джерелаKotukh, Volodymyr, Natalia Kaptsova, Dmitry Donskoy, and Kateryna Paleyeva. "ASSESSMENT OF THE IMPACT OF TECHNOLOGICAL HEREDITY ON INDICATORS OF RELIABILITY, DURABILITY AND ENVIRONMENTAL SAFETY OF ELEMENTS OF GAS TRANSMISSION SYSTEMS." Bulletin of the National Technical University "KhPI". Series: Chemistry, Chemical Technology and Ecology, no. 2(6) (December 23, 2021): 60–66. http://dx.doi.org/10.20998/2079-0821.2021.02.08.
Повний текст джерелаSophiana, Intan Clarissa, Tri Partono Adhi, and Yogi Wibisono Budhi. "Simulation of Dry Reforming of Methane to Form Synthesis Gas as Feed Stock for Acetic Acid Production." MATEC Web of Conferences 333 (2021): 06002. http://dx.doi.org/10.1051/matecconf/202133306002.
Повний текст джерелаSophiana, Intan Clarissa, Tri Partono Adhi, and Yogi Wibisono Budhi. "Simulation of Dry Reforming of Methane to Form Synthesis Gas as Feed Stock for Acetic Acid Production." MATEC Web of Conferences 333 (2021): 06002. http://dx.doi.org/10.1051/matecconf/202133306002.
Повний текст джерелаPark, Hyungpil, Baeg-Soon Cha, and Byungohk Rhee. "Experimental and Numerical Investigation of the Effect of Process Conditions on Residual Wall Thickness and Cooling and Surface Characteristics of Water-Assisted Injection Molded Hollow Products." Advances in Materials Science and Engineering 2015 (2015): 1–11. http://dx.doi.org/10.1155/2015/161938.
Повний текст джерелаMokhov, M. A., Yu A. Sazonov, V. V. Mulenko, M. A. Frankov, Kh A. Tumanyan, V. G. Timoshenko, and S. V. Kruglov. "Development of Pumping Equipment for Oil and Gas Production in Complicated Conditions." Journal of Computational and Theoretical Nanoscience 16, no. 11 (November 1, 2019): 4573–78. http://dx.doi.org/10.1166/jctn.2019.8357.
Повний текст джерелаdas Neves, Maurício David Martins, Luzinete Pereira Barbosa, Luís Carlos Elias da Silva, Olandir Vercino Correa, and Isolda Costa. "TIG Welding of Sintered AISI 316 L Stainless Steel." Materials Science Forum 660-661 (October 2010): 454–59. http://dx.doi.org/10.4028/www.scientific.net/msf.660-661.454.
Повний текст джерелаMuhammad Suandi, Mohd Effendi, Mohammad Harith Amlus, Abdul Rahman Hemdi, Shayfull Zamree Abd Rahim, Mohd Fathullah Ghazali, and Nur Liza Rahim. "A Review on Sustainability Characteristics Development for Wooden Furniture Design." Sustainability 14, no. 14 (July 18, 2022): 8748. http://dx.doi.org/10.3390/su14148748.
Повний текст джерелаZhabrev, Leonid, Dmitry Kurushkin, Igor Mushnikov, and Oleg Panchenko. "The Coatings Breakdown Products Influence on the Gas Metal Arc Welding Parameters." Coatings 10, no. 11 (November 4, 2020): 1061. http://dx.doi.org/10.3390/coatings10111061.
Повний текст джерелаHumphrey, Daniel Ibani, Nkoi Barinyima, and Isaac Okwu E. "Effective Maintenance of Gas Turbine Power Plant to Improve Productivity." European Journal of Engineering Research and Science 4, no. 4 (April 8, 2019): 35–42. http://dx.doi.org/10.24018/ejers.2019.4.4.1109.
Повний текст джерелаHumphrey, Daniel Ibani, Nkoi Barinyima, and Isaac Okwu E. "Effective Maintenance of Gas Turbine Power Plant to Improve Productivity." European Journal of Engineering and Technology Research 4, no. 4 (April 8, 2019): 35–42. http://dx.doi.org/10.24018/ejeng.2019.4.4.1109.
Повний текст джерела