Добірка наукової літератури з теми "Fused salts Thermal properties"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fused salts Thermal properties".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Fused salts Thermal properties"
Wang, Jiayi, Tamar L. Greaves, Danielle F. Kennedy, Asoka Weerawardena, Gonghua Song, and Calum J. Drummond. "Amino Acid-derived Protic Ionic Liquids: Physicochemical Properties and Behaviour as Amphiphile Self-assembly Media." Australian Journal of Chemistry 64, no. 2 (2011): 180. http://dx.doi.org/10.1071/ch10314.
Повний текст джерелаPozzo, Jean-Luc, André Samat, Robert Guglielmetti, Vladimir Lokshin, and Vladimir Minkin. "Furo-fused 2H-chromenes: synthesis and photochromic properties." Canadian Journal of Chemistry 74, no. 9 (September 1, 1996): 1649–59. http://dx.doi.org/10.1139/v96-182.
Повний текст джерелаWeingärtner, Hermann. "Corresponding states for electrolyte solutions." Pure and Applied Chemistry 73, no. 11 (January 1, 2001): 1733–48. http://dx.doi.org/10.1351/pac200173111733.
Повний текст джерелаCao, Wenli, Jian Qin, Jianguo Zhang, and Valery P. Sinditskii. "4,5-Dicyano-1,2,3-Triazole—A Promising Precursor for a New Family of Energetic Compounds and Its Nitrogen-Rich Derivatives: Synthesis and Crystal Structures." Molecules 26, no. 21 (November 7, 2021): 6735. http://dx.doi.org/10.3390/molecules26216735.
Повний текст джерелаSoós, T., Gy Hajós, and A. Messmer. "Novel Thermal Rearrangement of Fused Diaryl-v-Triazolium Salts to Neutral Indazole Derivatives. Fused Azolium Salts. 16†." Journal of Organic Chemistry 62, no. 4 (February 1997): 1136–38. http://dx.doi.org/10.1021/jo961749o.
Повний текст джерелаNagahora, Noriyoshi, Kana Kitahara, Yoshiyuki Mizuhata, Norihiro Tokitoh, Kosei Shioji, and Kentaro Okuma. "Synthesis and Properties of Thiophene-Fused Thiopyrylium Salts." Journal of Organic Chemistry 85, no. 12 (May 25, 2020): 7748–56. http://dx.doi.org/10.1021/acs.joc.0c00364.
Повний текст джерелаSOOS, T., GY HAJOS та A. MESSMER. "ChemInform Abstract: Novel Thermal Rearrangement of Fused Diaryl-υ-triazolium Salts to Neutral Indazole Derivatives. Fused Azolium Salts. Part 16." ChemInform 28, № 26 (4 серпня 2010): no. http://dx.doi.org/10.1002/chin.199726060.
Повний текст джерелаNOMURA, Masato, and Yoshihito FUJIHARA. "Studies on the thermal decomposition of terpenes in mixed fused salts. VI. Thermal decomposition reaction of monocyclic and bicyclic monoterpene oxides in mixed fused salts." NIPPON KAGAKU KAISHI, no. 3 (1988): 321–25. http://dx.doi.org/10.1246/nikkashi.1988.321.
Повний текст джерелаPilania, Meenakshi, Mostofa Ataur Rohman, V. Arun, Manish Kumar Mehra, Sivaprasad Mitra, and Dalip Kumar. "An efficient synthesis of triazolium ion based NHC precursors using diaryliodonium salts and their photophysical properties." Organic & Biomolecular Chemistry 16, no. 40 (2018): 7340–45. http://dx.doi.org/10.1039/c8ob01818a.
Повний текст джерелаSalleh, Zulzamri, Md Mainul Islam, and Jayantha Ananda Epaarachchi. "Thermal Expansion Properties of Fused Borosilicate Syntactic Foams." Nano Hybrids and Composites 23 (December 2018): 39–45. http://dx.doi.org/10.4028/www.scientific.net/nhc.23.39.
Повний текст джерелаДисертації з теми "Fused salts Thermal properties"
DiGuilio, Ralph Michael. "The thermal conductivity of molten salts and concentrated aqueous salt solutions." Diss., Georgia Institute of Technology, 1991. http://hdl.handle.net/1853/11847.
Повний текст джерелаAmanuma, Kazushi. "Dielectric properties of PFN-PFT solid solution synthesized by the molten salt method." Master's thesis, This resource online, 1991. http://scholar.lib.vt.edu/theses/available/etd-01202010-020152/.
Повний текст джерелаAlawode, Olajide E. "Part 1: Mechanistic insights into the photochemistry of tetrazolethiones Part 2: Synthesis of phenanthridine-fused quinazoliniminium and computational investigation of their optoelectronic properties." Diss., Kansas State University, 2012. http://hdl.handle.net/2097/13652.
Повний текст джерелаDepartment of Chemistry
Sundeep Rayat
Research in our laboratory has focused on designing photoactivated DNA cleaving agents based on tetrazolethione scaffolds. The key step in the activation of these involves conversion of tetrazolethione moiety to carbodiimides upon irradiation. However, the mechanism of this reaction was not previously reported. Therefore, we undertook a study to elucidate the mechanism of photodecomposition of tetrazolethione as to identify reactive intermediates involved, that may interfere or aid with the activity of our synthesized DNA cleaving agents under physiological conditions. In Part 1 of this dissertation, we present mechanistic studies on this photodecomposition. Our results indicate the clean photoconversion of tetrazolethiones I to their respective carbodiimides IV via the expulsion of sulfur and dinitrogen. Photoirradiation in the presence of trapping agent (e.g. 1,4-cyclohexadiene) resulted into the formation of their corresponding thioureas. Thus, providing strong evidence for the intermediacy of a 1,3-biradical III, which is believed to be in its triplet spin multiplicity. Further investigations (triplet sensitization and quenching experiments) to determine the precursor of the biradical argued against the involvement of a triplet excited state (T[subscript]1). We believe that the mechanistic pathway that leads to the formation of a 1,3-triplet biradical III is a diradicaloid species II-II" generated directly from the singlet excited state of tetrazolethiones (S[subscript]1) after the expulsion of dinitrogen. Once formed, this diradicaloid species could be envisioned to undergo intersystem crossing to generate the 1,3 triplet biradical III which then undergoes desulfurization to form carbodiimides IV (Chapter 2). Bridgehead-nitrogen containing fused heterocycles are regarded as “privileged structure” in biology and have found widespread applications in pharmaceutical industry. These heterocycles have also been evaluated in electroluminescent devices and organic dyes. Part II of the dissertation present new, concise and low cost strategies to a unique class of bridgehead nitrogen-containing fused heterocyclic scaffolds which involves two sequential intramolecular cyclizations from heteroenyne-allenes in the presence of Lewis acids such as SnCl[subscript]4 and BF[subscript]3.OEt[subscript]2, and trace water. The starting heteroenyne-allenes VI can be prepared from commercially available substrates V in 4 – 5 steps following standard protocols (Chapter 3). Furthermore, we employed density functional theory to gain insights into the optoelectronic properties of select derivatives of phenanthridine-fused quinazoliniminiums (PNQs) VII and their free base in order to evaluate their scope in OLED technology. Our results show that the energies of the Highest Occupied Molecular Orbital (HOMO), Lowest Unoccupied Molecular Orbital (LUMO), the HOMO-LUMO energy gaps, the ionization potentials, electron affinities and the reorganization energies can be finely tuned by varying the substituents on these chromophores. In addition, we found that the introduction of an electron donating group (NMe[subscript]2) on the PNQs and their free base increases the energies of the HOMOs and decreases the ionization potentials, relative to its unsubstituted derivative, whereas substitution by an electron withdrawing group (NO[subscript]2) decreases the energies of the LUMOs and increases the electron affinities which in turn suggests an improvement in their hole and electron creating abilities, respectively (Chapter 4).
Goldblatt, Nicholas Zalmon. "The characterisation of manganese (IV) compounds and the study of the thermal decomposition of potassium chlorate alone and with Mn(IV) and other oxides and salts." Thesis, Brunel University, 1998. http://bura.brunel.ac.uk/handle/2438/5260.
Повний текст джерелаEngkvist, Gustav. "Investigation of microstructure and mechanical properties of 3D printed Nylon." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2017. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-66304.
Повний текст джерелаÅkerlund, Elin. "Development of polymer based composite filaments for 3D printing." Thesis, Uppsala universitet, Tillämpad materialvetenskap, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-388554.
Повний текст джерелаTing, Tsai,Shu, and 蔡淑婷. "Effect of Salts on the Thermal Behaviors and Rheological Properties of Rice Starch During Gelatinization and Retrogradation." Thesis, 1996. http://ndltd.ncl.edu.tw/handle/89359007362495882995.
Повний текст джерелаAttoye, Samuel Osekafore. "A Study of Fused Deposition Modeling (FDM) 3-D Printing Using Mechanical Testing and Thermography." Thesis, 2018. http://hdl.handle.net/1805/17670.
Повний текст джерелаFused deposition modeling (FDM) represents one of the most common techniques for rapid proto-typing in additive manufacturing (AM). This work applies image based thermography to monitor the FDM process in-situ. The nozzle temperature, print speed and print orientation were adjusted during the fabrication process of each specimen. Experimental and numerical analysis were performed on the fabricated specimens. The combination of the layer wise temperature profile plot and temporal plot provide insights for specimens fabricated in x, y and z-axis orientation. For the x-axis orientation build possessing 35 layers, Specimens B16 and B7 printed with nozzle temperature of 225 C and 235 C respectively, and at printing speed of 60 mm/s and 100 mm/s respectively with the former possessing the highest modulus, yield strength, and ultimate tensile strength. For the y-axis orientation build possessing 59 layers, Specimens B23, B14 and B8 printed with nozzle temperature of 215 C, 225 C and 235 C respectively, and at printing speed of 80 mm/s, 80 mm/s and 60 mm/s respectively with the former possessing the highest modulus and yield strength, while the latter the highest ultimate tensile strength. For the z-axis orientation build possessing 1256 layers, Specimens B6, B24 and B9 printed with nozzle temperature of 235 C, 235 C and 235 ➦C respectively, and at printing speed of 80 mm/s, 80 mm/s and 60 mm/s respectively with the former possessing the highest modulus and ultimate tensile strength, while B24 had the highest yield strength and B9 the lowest modulus, yield strength and ultimate tensile strength. The results show that the prints oriented in the y-axis orientation perform relatively better than prints in the x-axis and z-axis orientation.
Yu-WeiKuo and 郭又瑋. "Synthesis, investigation of crystal structures, thermal and magnetic properties of imidazolium and pyridinium salts of cobalt(Ⅱ) and manganese(Ⅱ)." Thesis, 2012. http://ndltd.ncl.edu.tw/handle/20604766857951594423.
Повний текст джерела國立成功大學
化學系碩博士班
100
It has been reported that the molten salts with dicationic system have higher magnetic susceptibility than monocationic counterion. It is an interesting discovery. However, the application of these kinds of molten salts are restricted because of their high melting point. In this study, we try to improve this drawback by increasing the carbon chain linked to two monocations of the molten salts. Besides, we also discuss the relationship between the carbon chain and magnetic susceptibility of these compounds. The salts consisting of dicationic (imidazolium, pyridinium) and transition metal-based anion (Co, Mn) are synthesized. The first type of dicationic salt, which contains [CoCl4]2-、[MnCl4]2- anions, is thermal stable and can soluble in polar solvents. The melting point of these compounds with long carbon chain linked to two monocations are lower than the reported examples. All compounds exhibit antiferromagnetic interactions, and the carbon chain does not affect their magnetic susceptibility. The second type of dicationic salt, which contains [CoBrxCl(4-x)]2-、[MnBryCl(4-y)]2- anions, is thermal stable and can soluble in high polar solvents such as methanol and water. Magnetic measurements indicate these compounds are antiferromagnetic. Because of special structure, it is hard to judge whether magnetic susceptibility is affected by carbon chain or not.
(5931008), Samuel Attoye. "A Study of Fused Deposition Modeling (FDM) 3-D Printing using Mechanical Testing and Thermography." Thesis, 2019.
Знайти повний текст джерелаКниги з теми "Fused salts Thermal properties"
Singh, Gurdip. Recent researches on thermolysis of energetic materials. New York: Nova Science Publishers, 2008.
Знайти повний текст джерелаJanz, George J. Thermodynamic and transport properties for molten salts: Correlation equations for critically evaluated density, surface tension, electrical conductance, and viscosity data. Washington, D.C: published by the American Chemical Society and the American Institute of Physics for the National Bureau of Standards, 1988.
Знайти повний текст джерелаHigh Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions. CRC, 2000.
Знайти повний текст джерелаStern, K. H. High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions. Taylor & Francis Group, 2010.
Знайти повний текст джерелаStern, Kurt H. High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions. Taylor & Francis Group, 2000.
Знайти повний текст джерелаStern, Kurt H. High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions. Taylor & Francis Group, 2000.
Знайти повний текст джерелаЧастини книг з теми "Fused salts Thermal properties"
Song, W. Q., and S. H. Masood. "Dynamic Mechanical Thermal Properties of a New Metal/Polymer Composite for Fused Deposition Modelling Process." In Materials Science Forum, 795–98. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-462-6.795.
Повний текст джерелаEngh, Thorvald Abel, Geoffrey K. Sigworth, and Anne Kvithyld. "Thermodynamics and Transport Properties." In Principles of Metal Refining and Recycling, 72–181. Oxford University Press, 2021. http://dx.doi.org/10.1093/oso/9780198811923.003.0002.
Повний текст джерела"Oxysalts of Chlorine." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 209–40. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-10.
Повний текст джерела"Oxysalts of Bromine." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 241–56. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-11.
Повний текст джерела"Oxysalts of Iodine." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 257–85. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-12.
Повний текст джерела"Introduction." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 21–34. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-4.
Повний текст джерела"Carbonates." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 35–72. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-5.
Повний текст джерела"Sulfites." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 73–78. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-6.
Повний текст джерела"Sulfates." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 79–154. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-7.
Повний текст джерела"Nitrites and Nitrates." In High Temperature Properties and Thermal Decomposition of Inorganic Salts with Oxyanions, 155–204. CRC Press, 2000. http://dx.doi.org/10.1201/9781420042344-8.
Повний текст джерелаТези доповідей конференцій з теми "Fused salts Thermal properties"
Myers, Philip D., Abhinav Bhardwaj, D. Yogi Goswami, and Elias Stefanakos. "Chloride Salt Systems for High Temperature Thermal Energy Storage: Properties and Applications." In ASME 2015 9th International Conference on Energy Sustainability collocated with the ASME 2015 Power Conference, the ASME 2015 13th International Conference on Fuel Cell Science, Engineering and Technology, and the ASME 2015 Nuclear Forum. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/es2015-49460.
Повний текст джерелаHamdy, Esraa, Shaker Ebrahim, Fuad Abulfotuh, and Moataz Soliman. "Effect of multi-walled carbon nanotubes on thermal properties of nitrate molten salts." In 2016 International Renewable and Sustainable Energy Conference (IRSEC). IEEE, 2016. http://dx.doi.org/10.1109/irsec.2016.7983997.
Повний текст джерелаIverson, Brian D., Joseph G. Cordaro, and Alan M. Kruizenga. "Thermal Property Testing of Nitrate Thermal Storage Salts in the Solid-Phase." In ASME 2011 5th International Conference on Energy Sustainability. ASMEDC, 2011. http://dx.doi.org/10.1115/es2011-54159.
Повний текст джерелаPodsiadły, Bartłomiej J., Andrzej Skalski, and Marcin Słoma. "Mechanical and thermal properties of ABS/iron composite for fused deposition modeling." In Photonics Applications in Astronomy, Communications, Industry, and High-Energy Physics Experiments 2019, edited by Ryszard S. Romaniuk and Maciej Linczuk. SPIE, 2019. http://dx.doi.org/10.1117/12.2536837.
Повний текст джерелаLiang, Yannan, Jiemin Zhou, Ying Yang, Ye Wu, and Yanyan He. "The Experimental Research and Numerical Simulation on Thermal Properties of Molten Salt at Melting Point." In ASME 2009 Second International Conference on Micro/Nanoscale Heat and Mass Transfer. ASMEDC, 2009. http://dx.doi.org/10.1115/mnhmt2009-18084.
Повний текст джерелаYang, Bing-Chwen, Shr-Hau Huang, and Hsiang-Hui Lin. "Experimental Study of Thermal Energy Storage System." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1348.
Повний текст джерелаRizvi, Syed Muhammad Mujtaba, Yousof Nayfeh, Baha El Far, and Donghyun Shin. "Use of Silica Coated Zinc Nanoparticles for Enhancement in Thermal Properties of Carbonate Eutectic Salt for Concentrated Solar Power Plants." In ASME 2020 14th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/es2020-1710.
Повний текст джерелаPohanka, Michal, Keith A. Woodbury, and Jonathan Woolley. "Obtaining Temperature-Dependent Thermal Properties of Investment Casting Mold." In ASME 2002 International Mechanical Engineering Congress and Exposition. ASMEDC, 2002. http://dx.doi.org/10.1115/imece2002-32433.
Повний текст джерелаWang, Kai, Edgar Molina, Ghazal Dehghani, Ben Xu, Peiwen Li, Qing Hao, Pierre Lucas, Mohamad H. Kassaee, Sheldon M. Jeter, and Amyn S. Teja. "Experimental Investigation to the Properties of Eutectic Salts by NaCl-KCl-ZnCl2 for Application as High Temperature Heat Transfer Fluids." In ASME 2014 8th International Conference on Energy Sustainability collocated with the ASME 2014 12th International Conference on Fuel Cell Science, Engineering and Technology. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/es2014-6578.
Повний текст джерелаMoukannaa, Samira, Ali Nazari, Ali Bagheri, Mohamed Loutou, and Rachid Hakkou. "Thermal resistance of alkaline fused phosphate sludge-based geopolymer mortar." In The 13th international scientific conference “Modern Building Materials, Structures and Techniques”. Vilnius Gediminas Technical University, 2019. http://dx.doi.org/10.3846/mbmst.2019.073.
Повний текст джерела