Статті в журналах з теми "Freeformer"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Freeformer".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Fateri, Miranda, João Falcão Carneiro, Constantin Schuler, João Bravo Pinto, Fernando Gomes de Almeida, Udo Grabmeier, Tobias Walcher, and Michael Salinas. "Impact of 3D Printing Technique and TPE Material on the Endurance of Pneumatic Linear Peristaltic Actuators." Micromachines 13, no. 3 (February 28, 2022): 392. http://dx.doi.org/10.3390/mi13030392.
Повний текст джерелаCeskova, Martina, and Petr Lenfeld. "POLYMER CAVITY MADE BY FREEFORMER® 3D PRINTER: AN INFLUENCE ON INJECTION MOULDED PARTS." MM Science Journal 12, no. 2018 (December 12, 2018): 2710–14. http://dx.doi.org/10.17973/mmsj.2018_12_2018125.
Повний текст джерелаGiacoppo, Giuliano A., Julia Hötzel, and Peter P. Pott. "Additively Manufactured Porous Filling Pneumatic Network Actuator." Actuators 12, no. 11 (November 7, 2023): 414. http://dx.doi.org/10.3390/act12110414.
Повний текст джерелаLiu, Junfeng, Yuqian Zhao, Kexian Liu, Linfeng Wang, and Fei Li. "Compensation machining of freeform based on fast tool servo system." PLOS ONE 18, no. 3 (March 16, 2023): e0282752. http://dx.doi.org/10.1371/journal.pone.0282752.
Повний текст джерелаHorii, T., M. Ishikawa, Soshu Kirihara, Yoshinari Miyamoto, and Nobu Yamanaka. "Development of Freeform Fabrication of Metals by Three Diminsional Micro-Welding." Solid State Phenomena 127 (September 2007): 189–94. http://dx.doi.org/10.4028/www.scientific.net/ssp.127.189.
Повний текст джерелаFrank, Samson, Maria Reichenbächer, Michael Seiler, Thomas Arnold, and Jens Bliedtner. "Investigation on Subsurface Damage Patterns in Ultrashort Pulse Laser Machining of Glass using Optical Coherence Tomography." EPJ Web of Conferences 287 (2023): 05024. http://dx.doi.org/10.1051/epjconf/202328705024.
Повний текст джерелаZhu, Z., B. Peng, J. Yuan, and X. Xu. "Design method of double freeform surface lens with diffuse reflection." Lighting Research & Technology 52, no. 2 (February 4, 2019): 247–56. http://dx.doi.org/10.1177/1477153519825875.
Повний текст джерелаWang, Xuchu, Qingshun Bai, Siyu Gao, Liang Zhao, and Kai Cheng. "A Toolpath Planning Method for Optical Freeform Surface Ultra-Precision Turning Based on NURBS Surface Curvature." Machines 11, no. 11 (November 9, 2023): 1017. http://dx.doi.org/10.3390/machines11111017.
Повний текст джерелаKong, Lingbao, Yingao Ma, Mingjun Ren, Min Xu, and Chifai Cheung. "Generation and characterization of ultra-precision compound freeform surfaces." Science Progress 103, no. 1 (October 10, 2019): 003685041988011. http://dx.doi.org/10.1177/0036850419880112.
Повний текст джерелаLi, Hua, Suet To, Ling Bao Kong, Chi Fai Cheung, and Wing Bun Lee. "Inspection Technology for F-Theta Lens: Practices and Discussions." Key Engineering Materials 364-366 (December 2007): 1191–96. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.1191.
Повний текст джерелаZhang, Yilan, Haodong Shi, and Huilin Jiang. "Analysis of polarization characteristics of freeform surface optical system." ITM Web of Conferences 45 (2022): 01053. http://dx.doi.org/10.1051/itmconf/20224501053.
Повний текст джерелаHu, Zhang Fang, Jian Wei Mao, and Yuan Luo. "Research on LED Lighting Secondary Light Distribution by Using a Freeform Lens." Applied Mechanics and Materials 103 (September 2011): 138–41. http://dx.doi.org/10.4028/www.scientific.net/amm.103.138.
Повний текст джерелаLiu, Xinyu, and Jun Zhu. "Design Method of Freeform Off-Axis Multi-Mirror Optical Systems." Photonics 9, no. 8 (July 30, 2022): 534. http://dx.doi.org/10.3390/photonics9080534.
Повний текст джерелаLuo, D., P. Ge, D. Liu, and H. Wang. "A combined lens design for an LED low-beam motorcycle headlight." Lighting Research & Technology 50, no. 3 (March 6, 2017): 456–66. http://dx.doi.org/10.1177/1477153517697370.
Повний текст джерелаBurada, Dali Ramu, Kamal K. Pant, Vinod Mishra, Mohamed Bichra, Gufran Sayeed Khan, Stefan Sinzinger, and Chandra Shakher. "Development of a metrology technique suitable for in situ measurement and corrective manufacturing of freeform optics." Advanced Optical Technologies 8, no. 3-4 (June 26, 2019): 203–15. http://dx.doi.org/10.1515/aot-2018-0072.
Повний текст джерелаSieber, Ingo, Allen Yi, and Ulrich Gengenbach. "Metrology Data-Based Simulation of Freeform Optics." Applied Sciences 8, no. 12 (November 22, 2018): 2338. http://dx.doi.org/10.3390/app8122338.
Повний текст джерелаWang, Su Juan, Su Et To, Xin Chen, and Jian Qun Liu. "Development of Cutting Strategy in Ultra-Precision Raster Milling of Freeform Surface." Applied Mechanics and Materials 633-634 (September 2014): 615–19. http://dx.doi.org/10.4028/www.scientific.net/amm.633-634.615.
Повний текст джерелаLee, Dongyoun, and Junho Hong. "Development of an Adaptive Slicing Algorithm of Laminated Object Manufacturing Based 3D Printing for Freeform Formwork." Buildings 12, no. 9 (August 30, 2022): 1335. http://dx.doi.org/10.3390/buildings12091335.
Повний текст джерелаChen, Xun. "Corrective Abrasive Polishing Processes for Freeform Surface." Key Engineering Materials 404 (January 2009): 103–12. http://dx.doi.org/10.4028/www.scientific.net/kem.404.103.
Повний текст джерелаLee, Hyun, Tae-Sik Jang, Ginam Han, Hae-Won Kim, and Hyun-Do Jung. "Freeform 3D printing of vascularized tissues: Challenges and strategies." Journal of Tissue Engineering 12 (January 2021): 204173142110572. http://dx.doi.org/10.1177/20417314211057236.
Повний текст джерелаNagdeve, Leeladhar, V. K. Jain, and J. Ramkumar. "Nanofinishing of freeform/sculptured surfaces: state-of-the-art." Manufacturing Review 5 (2018): 6. http://dx.doi.org/10.1051/mfreview/2018005.
Повний текст джерелаMishra, Vinod, Dali R. Burada, Vinod Karar, Alakesh Manna, Sunil Jha, and Gufran Sayeed Khan. "Investigations on flexible pad polishing for nano-finishing of freeform optics mold." Journal of Micromanufacturing 3, no. 2 (September 30, 2020): 99–112. http://dx.doi.org/10.1177/2516598420939740.
Повний текст джерелаWang, Su Juan, Chi Fai Cheung, Sandy To, and Wing Bun Lee. "Fabrication of Freeform Optics in Ultra-Precision Raster Milling." Key Engineering Materials 339 (May 2007): 412–16. http://dx.doi.org/10.4028/www.scientific.net/kem.339.412.
Повний текст джерелаHenkel, Sebastian, Christian Schulze, Samson Frank, Christoph Letsch, Jens Bliedtner, Thomas Arnold, Heike Müller, and Edda Rädlein. "Investigations on a novel process chain for manufacturing of freeform surfaces." EPJ Web of Conferences 266 (2022): 03010. http://dx.doi.org/10.1051/epjconf/202226603010.
Повний текст джерелаJiang, W., Bill Tse, Roy Louie, and Frankie Chan. "Diamond Turning Freeform Optics." Key Engineering Materials 364-366 (December 2007): 1–6. http://dx.doi.org/10.4028/www.scientific.net/kem.364-366.1.
Повний текст джерелаLi, H. F., Chi Fai Cheung, Ling Bao Kong, Wing Bun Lee, and Sandy To. "A Study of Measurement Technology for Ultra-Precision Freeform Surfaces." Key Engineering Materials 339 (May 2007): 417–21. http://dx.doi.org/10.4028/www.scientific.net/kem.339.417.
Повний текст джерелаLiu, Qi Tong, Jian Ming Zhan, and Jian Hua Mao. "Study on Profile-Adaptive Tool System for Small Robots in Large Freeform Surface Polishing." Applied Mechanics and Materials 37-38 (November 2010): 1327–31. http://dx.doi.org/10.4028/www.scientific.net/amm.37-38.1327.
Повний текст джерелаZhang, Shen, Jian Jun Wu, and Liang Cai Deng. "Springback Prediction and Compensation for Thick Freeform Surface Parts Forming." Applied Mechanics and Materials 271-272 (December 2012): 498–503. http://dx.doi.org/10.4028/www.scientific.net/amm.271-272.498.
Повний текст джерелаSong, Y., J. S. M. Vergeest, and W. F. Bronsvoort. "Fitting and Manipulating Freeform Shapes Using Templates." Journal of Computing and Information Science in Engineering 5, no. 2 (December 27, 2004): 86–94. http://dx.doi.org/10.1115/1.1875592.
Повний текст джерелаZhu, Jiang, Keisuke Nomura, Tomohisa Tanaka, and Yoshio Saito. "Tool Path Planning Assist System for Freeform Surface Machining." Key Engineering Materials 447-448 (September 2010): 321–25. http://dx.doi.org/10.4028/www.scientific.net/kem.447-448.321.
Повний текст джерелаMeinzer, Nina. "Freeform fabrication." Nature Physics 18, no. 1 (January 2022): 9. http://dx.doi.org/10.1038/s41567-021-01497-5.
Повний текст джерелаPrautzsch, Hartmut. "Freeform splines." Computer Aided Geometric Design 14, no. 3 (April 1997): 201–6. http://dx.doi.org/10.1016/s0167-8396(96)00029-5.
Повний текст джерелаHuang, Ya, Ri Hong Zhu, Jun Ma, and Hua Shen. "Asphericity and Discrete Phase Calculation for Optical Freeform Surface Test with Computer Generated Holograms." Advanced Materials Research 718-720 (July 2013): 1797–803. http://dx.doi.org/10.4028/www.scientific.net/amr.718-720.1797.
Повний текст джерелаKong, Ling Bao, Chi Fai Cheung, Wing Bun Lee, and Sandy To. "A Framework of an Integrated Platform for Modelling and Measurement of Freeform Surface Generation in Ultra-Precision Raster Milling." Key Engineering Materials 339 (May 2007): 422–26. http://dx.doi.org/10.4028/www.scientific.net/kem.339.422.
Повний текст джерелаXiong, Juan, and Li Na Han. "Application of CAD/CAM Technology on the Modeling of Freeform Surface Parts." Applied Mechanics and Materials 121-126 (October 2011): 3160–64. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.3160.
Повний текст джерелаGeyl, Roland, François Houbre, Yan Cornil, Thierry Lepine, and Yvan Sortais. "Optiques freeforms : défis et perspectives." Photoniques, no. 106 (January 2021): 17–21. http://dx.doi.org/10.1051/photon/202110617.
Повний текст джерелаDai, Yi Dan, En Shi Qu, Li Yong Ren, Xin Chao Du, and Hai Juan Ju. "The Design of Freeform Surface Fresnel Lens Used for LED Uniform Illumination." Applied Mechanics and Materials 571-572 (June 2014): 976–79. http://dx.doi.org/10.4028/www.scientific.net/amm.571-572.976.
Повний текст джерелаWang, Tsung-Hsien, Olivia Espinosa Trujillo, Wen-Shao Chang, and Bailin Deng. "Encoding bamboo’s nature for freeform structure design." International Journal of Architectural Computing 15, no. 2 (June 2017): 169–82. http://dx.doi.org/10.1177/1478077117714943.
Повний текст джерелаJi, Shijun, Huijuan Yu, and Ji Zhao. "An Improved Method for Generating Cutter Points Based on Required Form Accuracy of the Machining Surface." Mathematical Problems in Engineering 2015 (2015): 1–8. http://dx.doi.org/10.1155/2015/940643.
Повний текст джерелаLi, Jing Yuan, Ren Ping Xu, Kun Qian Wang, and Rui Bo Hu. "The Development and Innovation of Yunnan Clay Handicraft Base on the FreeForm System." Advanced Materials Research 230-232 (May 2011): 206–11. http://dx.doi.org/10.4028/www.scientific.net/amr.230-232.206.
Повний текст джерелаLai, J., X. Li, and P. Ge. "Designing double freeform surfaces for point source and extended sources using a construction, iteration and optimization process." Lighting Research & Technology 51, no. 7 (October 22, 2018): 1118–27. http://dx.doi.org/10.1177/1477153518807507.
Повний текст джерелаWei, Yi, Peng Zhai, Xiaoyi Chen, and Lei He. "Study on Design and Diamond Turning of Optical Freeform Surface for Progressive Addition Lenses." Mathematical Problems in Engineering 2020 (February 22, 2020): 1–9. http://dx.doi.org/10.1155/2020/2850606.
Повний текст джерелаLangerak, Thomas R. "Local parameterization of freeform shapes using freeform feature recognition." Computer-Aided Design 42, no. 8 (August 2010): 682–92. http://dx.doi.org/10.1016/j.cad.2010.02.004.
Повний текст джерелаDu, Xu, Jie Huang, Li-Min Zhu, and Han Ding. "Third-order chord error estimation for freeform contour in computer-aided manufacturing and computer numerical control systems." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 233, no. 3 (February 21, 2018): 863–74. http://dx.doi.org/10.1177/0954405418757266.
Повний текст джерелаElber, Gershon. "Multiresolution Curve Editing With Linear Constraints*." Journal of Computing and Information Science in Engineering 1, no. 4 (October 1, 2001): 347–55. http://dx.doi.org/10.1115/1.1430679.
Повний текст джерелаXiong, Juan, and Lan Feng Sun. "Three-Dimensional Modeling and Analysis for Runner Blades of Turbine." Applied Mechanics and Materials 121-126 (October 2011): 1521–25. http://dx.doi.org/10.4028/www.scientific.net/amm.121-126.1521.
Повний текст джерелаVan, Quy Hoang, and Tuyen Bui Ngoc. "Effect of Feed Rate, Tool-Path and Step over on Geometric Accuracy of Freeform Surfaces when 3 Axis CNC Milling." Applied Mechanics and Materials 889 (March 2019): 107–14. http://dx.doi.org/10.4028/www.scientific.net/amm.889.107.
Повний текст джерелаKIM, JUNG SU, DONG SOO KIM, MIN CHEOL LEE, and WON HEE LEE. "A METHOD OF 3D FREEFORM FABRICATION USING A CURING OF PHOTOPOLYMER RESIN." International Journal of Modern Physics B 22, no. 09n11 (April 30, 2008): 1839–45. http://dx.doi.org/10.1142/s021797920804750x.
Повний текст джерелаRen, Ming Jun, Chi Fai Cheung, and Ling Bao Kong. "A Study of Fiducial Aided Precision Positioning of Ultra-Precision Freeform Surfaces." Key Engineering Materials 679 (February 2016): 167–71. http://dx.doi.org/10.4028/www.scientific.net/kem.679.167.
Повний текст джерелаGe, Q. J., and M. Sirchia. "Computer Aided Geometric Design of Two-Parameter Freeform Motions." Journal of Mechanical Design 121, no. 4 (December 1, 1999): 502–6. http://dx.doi.org/10.1115/1.2829489.
Повний текст джерела