Добірка наукової літератури з теми "Fractional Slot winding SyR"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fractional Slot winding SyR".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Fractional Slot winding SyR"
Wang, Xiu Ping, Chun Yu Qu, Rui Guo, and Jun You Zhao. "Performance Analysis of Novel Fractional-Slot Concentrated-Winding Permanent Magnet Machine with Different Pole and Slot Matching." Applied Mechanics and Materials 668-669 (October 2014): 625–28. http://dx.doi.org/10.4028/www.scientific.net/amm.668-669.625.
Повний текст джерелаWu, Chuan Guo, Jian Zhong Zhang, Yu Ting Chen, and Ming Cheng. "Comparison Study of Tubular Linear Surface-Mounted Permanent Magnet Actuator with Different Fractional Slot Winding." Applied Mechanics and Materials 416-417 (September 2013): 281–86. http://dx.doi.org/10.4028/www.scientific.net/amm.416-417.281.
Повний текст джерелаWang, Xiu Ping, and Chun Yu Qu. "On the Possibility of Fractional-Slot Concentrated-Winding Permanent Magnet Machine for Wind Power Generation." Advanced Materials Research 945-949 (June 2014): 2858–62. http://dx.doi.org/10.4028/www.scientific.net/amr.945-949.2858.
Повний текст джерелаWang, Xiu Ping, Chun Yu Qu, Xiao Feng Xu, and Dong Rui Wang. "Design and Analysis of Fractional-Slot Concentrated-Winding Permanent Magnet Machine for Wind Power Generation." Applied Mechanics and Materials 668-669 (October 2014): 611–14. http://dx.doi.org/10.4028/www.scientific.net/amm.668-669.611.
Повний текст джерелаLiu, Guang Qi. "Investigation on Slot/Pole Number Combinations for PMSM with Concentrated Fractional Slot Winding." Advanced Engineering Forum 2-3 (December 2011): 512–18. http://dx.doi.org/10.4028/www.scientific.net/aef.2-3.512.
Повний текст джерелаVialcev, Georgy B., Dmitriy M. Toporkov, and Olga E. Gubareva. "Investigation of Winding Circuit Effect on Characteristics of Permanent Magnet Synchronous Machines with Fractional Slot Concentrated Winding." Applied Mechanics and Materials 698 (December 2014): 30–34. http://dx.doi.org/10.4028/www.scientific.net/amm.698.30.
Повний текст джерелаYokoi, Yuichi, Tsuyoshi Higuchi, and Yasuhiro Miyamoto. "General formulation of winding factor for fractional‐slot concentrated winding design." IET Electric Power Applications 10, no. 4 (April 2016): 231–39. http://dx.doi.org/10.1049/iet-epa.2015.0092.
Повний текст джерелаLaksar, Jan, Lukáš Veg, and Roman Pechánek. "Challenges in Winding Design and Thermal Calculations: Physical Model of Permanent Magnet Synchronous Machine." Machines 9, no. 10 (October 13, 2021): 234. http://dx.doi.org/10.3390/machines9100234.
Повний текст джерелаMohd Jamil, Mohd Luqman, Zulfikri Zaki Zolkapli, Auzani Jidin, Raja Nor Firdaus Raja Othman, and Tole Sutikno. "Electromagnetic Performance due to Tooth-tip Design in Fractional-slot PM Brushless Machines." International Journal of Power Electronics and Drive Systems (IJPEDS) 6, no. 4 (December 1, 2015): 860. http://dx.doi.org/10.11591/ijpeds.v6.i4.pp860-868.
Повний текст джерелаBoglietti, Aldo, Marco Cossale, Silvio Vaschetto, and Thiago Dutra. "Thermal Conductivity Evaluation of Fractional-Slot Concentrated-Winding Machines." IEEE Transactions on Industry Applications 53, no. 3 (May 2017): 2059–65. http://dx.doi.org/10.1109/tia.2017.2672518.
Повний текст джерелаДисертації з теми "Fractional Slot winding SyR"
Fei, Wei-Zhong. "Permanent magnet synchronous machines with fractional slot and concentrated winding configurations." Thesis, Cranfield University, 2011. http://dspace.lib.cranfield.ac.uk/handle/1826/6150.
Повний текст джерелаKouevidjin, Modobozi. "Evaluation des performances énergétiques d'une nouvelle génération d'éolienne off-shore." Thesis, Artois, 2015. http://www.theses.fr/2015ARTO0208/document.
Повний текст джерелаThe studied alternator equips a vertical axis offshore wind turbine. It is a 2MW fractional slotconcentrated winding permanent magnet synchronous polyphase machine, directly connected to bladeturbine. The principal purpose of this thesis consists in characterizing the alternator in order toevaluate its performances. The air gap permeance and the magnemotive force analytical modelingleads to study the air gap flux density and its harmonic content, which is particularly rich. Thecharacterization has also concerned the self and mutual inductance determination, which has requiredstalling the model by exploiting experimental measurements done at standstill. The particularity of thestudied machine leads us to consider an equivalent fictitious winding in order to determine the cyclicalinductances, necessary for the single-phase equivalent scheme establishment. Moreover, the machineback to back functioning has been studied and simulated. This functioning allows testing the machineitself and the other conversion chain subsystems, without using a second machine or blades to drivethe prototype rotor. It offers the possibility to test different types of operating points and to estimatethe power that can produce the studied machine: different operating points scenarios have beensimulated and parameters for tests have been defined. The back to back functioning of a classicalsynchronous machine has been also investigated, with an analytical modeling of the electromagneticphenomena and experimental tests
Dai, Pre Michele. "Analysis and design of Fault-Tolerant drives." Doctoral thesis, Università degli studi di Padova, 2008. http://hdl.handle.net/11577/3425500.
Повний текст джерелаAslan, Bassel. "Conception de Machines Polyphasées à Aimants et Bobinage Concentré à Pas Fractionnaire avec Large Plage de Vitesse." Thesis, Paris, ENSAM, 2013. http://www.theses.fr/2013ENAM0039/document.
Повний текст джерелаThe aim of this thesis is to design an electrical machine dedicated for Mild-Hybrid applications. By providing certain functionalities, this machine can reduce fuel consumption in the vehicle and therefore reduce the amount of released gases. The challenges imposed by such application on both torque and power lead us to study the multiphase PM machines with concentrated windings. This windings technology provides efficient machines which are easy to manufacture, repair and recycle, but accompanied with a certain level of parasitic effects. In order to find a compromise between these effects and the ability to provide torque, the thesis concerns the study of winding topologies with different Slots/Poles combinations. An analytical model constituting a tool to compare magnet losses between various combinations is developed. Many configurations are compared in order to make the most appropriate choice which minimizes parasitic effects. The rotor topologies that allow the machine to provide a wide speed range are examined, taking into account their role in magnets protection against MMF harmful harmonics. Finally, the exploitation of freedom degree offered by a 5-phases structure is discussed, showing that the torque can be significantly boosted by modifying the rotor structure. The consistency of all analytical studies presented in the thesis is corroborated by finite element models and a prototype measurement
Le, Luong Huong Thao. "Optimal Design of Modular High Performance Brushless Wound Rotor Synchronous Machine for embedded systems." Thesis, Toulouse, INPT, 2018. http://www.theses.fr/2018INPT0111/document.
Повний текст джерелаThis thesis is dedicated to the design and the optimization of modular brushless wound rotor synchronous machine for embedded systems. This machine is constructed based on POKIPOKITM structure with integrated drive electronics. Finite element analysis based optimization becomes more popular in the field of electrical machine design because analytical equations are not easily formalized for the machines which have complicate structures. Using electromagnetic analysis to comparatively study different modular brushless wound rotor synchronous machines and therefore, to select the structure which offers the best fault tolerant capability and the highest output performances. Firstly, the fundamental winding factor calculated by using the method based on voltage phasors is considered as a significant criterion in order to select the numbers of phases, stator slots and poles. After that, 2D finite element numerical simulations are carried out for a set of 15 machines to analyze their performances. The simulation results are then compared to find an appropriate machine according to torque density, torque ripple and machine efficiency. The 7phase/7-slot/6-pole machine is chosen and compared with a reference design surfacemounted permanent magnet synchronous machine in order to evaluate the interesting performance features of the wound rotor synchronous machine. In the second design stage, this machine is optimized by using derivative-free optimization. The objective is to minimize external volume under electromagnetic, thermal and mechanical constraints. Given that an accurate finite element analysis for machine performance takes a long time. Moreover, considering that the average torque can be obtained by simulating the model with only four rotor positions instead of one electric period, optimization strategy is proposed to reduce computational time and therefore, obtain a fast convergence ability by defining relaxed problems which enable minimizing the external volume of the machine under only several constraints such as average torque, torque ripple and copper losses. By testing relaxed problems, two different optimization methods (NOMAD and fmincon) are compared in order to select an appropriate method for our optimization problem. Using NOMAD method based on Mesh Adaptive Direct Search, we achieve optimal results which satisfy all of the constraints proposed. In the third design stage, all constraints are validated by 3D electromagnetic and thermal simulations using finite element and computational fluid dynamics methods. The 3D results show that the average torque obtained is lower than the desired value. By increasing the length of the machine, a new corrected machine is thus obtained. It can be observed that the iron losses obtained in 3D are higher than that in 2D due to the leakage flux in the end-winding. Then, the machine temperature is analyzed by using ANSYS Fluent. Note that the surface temperature is higher than that calculated in the optimization and the coil temperature is 8.48°C higher than the desired value (105°C). However, some dissipation by the shaft and the bearings of the machine are expected to reduce the machine temperature. Finally, a machine prototype is built and some experimental tests are carried out. The results show that the electromotive force has a similar waveform compared to 3D prediction and the difference of the measured and predicted maximum static torques is small
Fei, W.-Z. "Permanent magnet synchronous machines with fractional slot and concentrated winding configurations." Thesis, 2011. http://dspace.lib.cranfield.ac.uk/handle/1826/6150.
Повний текст джерелаHarke, Markus. "Bruchlochwicklungen mit einem Wickelschritt von zwei Nuten." 2021. https://tubaf.qucosa.de/id/qucosa%3A76004.
Повний текст джерелаThis paper presents two layer fractional slot windings with a winding step of two slots as a possible compromise which enables less ohmic loss than classic distributed windings would have and less hysteresis and eddy loss than fractional slot concentrated windings would have. It discusses properties and design of such windings for three- and six-phase synchronous machines based on selected examples.
Частини книг з теми "Fractional Slot winding SyR"
Farshadnia, Mohammad. "Design of Optimal Winding Layouts for Multiphase Fractional-Slot Concentrated-Wound Permanent Magnet Machines." In Springer Theses, 61–94. Singapore: Springer Singapore, 2018. http://dx.doi.org/10.1007/978-981-10-8708-0_3.
Повний текст джерелаXuanfeng, Shangguan, Zhang Jiaolong, and Zhang Wenli. "Calculation of Winding Factor and Analysis of Armature MMF of a PMSM with Fractional-Slot and 5-Phase Winding." In Electrical, Information Engineering and Mechatronics 2011, 2039–46. London: Springer London, 2012. http://dx.doi.org/10.1007/978-1-4471-2467-2_241.
Повний текст джерелаQi, Ge, Ding Ma, Libing Zhou, and Li Shi. "Analysis of Dual Three-Phase Fractional-Slot PM Brushless AC Motor with Alternate Winding Connections." In Lecture Notes in Electrical Engineering, 793–800. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21747-0_102.
Повний текст джерелаZha, Chencheng, Bo Wang, and Wenhan Xu. "Electromagnetic Thermal Coupled Analysis of a Multiple Three-Phase Fractional Slot Concentrated Winding Fault-Tolerant Motor." In Lecture Notes in Electrical Engineering, 68–79. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-0553-9_9.
Повний текст джерелаEL-Refaie, Ayman M. "Fractional-slot concentrated winding machines and drives." In Modeling, Simulation and Control of Electrical Drives, 637–95. Institution of Engineering and Technology, 2019. http://dx.doi.org/10.1049/pbce118e_ch17.
Повний текст джерелаТези доповідей конференцій з теми "Fractional Slot winding SyR"
Krall, Rudolf, Johann Krenn, and Andreas Schmid. "Fractional slot winding versus distributed winding using winding function method." In 2014 International Conference on Optimization of Electrical and Electronic Equipment (OPTIM). IEEE, 2014. http://dx.doi.org/10.1109/optim.2014.6850900.
Повний текст джерелаKrall, Rudolf, Johann Krenn, and Andreas Schmid. "Comparison of leakage inductance between fractional slot winding and distributed winding." In 2014 16th International Power Electronics and Motion Control Conference (PEMC). IEEE, 2014. http://dx.doi.org/10.1109/epepemc.2014.6980505.
Повний текст джерелаJing Rao, Ronghai Qu, and Yuting Gao. "Un-even winding turns in fractional-slot concentrated-winding PM machines." In 2013 International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2013. http://dx.doi.org/10.1109/icems.2013.6754382.
Повний текст джерелаBoglietti, Aldo, Marco Cossale, Silvio Vaschetto, and Thiago Dutra. "Thermal conductivity evaluation of fractional-slot concentrated winding machines." In 2016 IEEE Energy Conversion Congress and Exposition (ECCE). IEEE, 2016. http://dx.doi.org/10.1109/ecce.2016.7855511.
Повний текст джерелаSchumann, Christian, Tobias Muller, Edgar Stein, and Mario Pacas. "Axial-flux-machine with an ironless fractional slot winding." In IECON 2014 - 40th Annual Conference of the IEEE Industrial Electronics Society. IEEE, 2014. http://dx.doi.org/10.1109/iecon.2014.7048535.
Повний текст джерелаMunteanu, Adrian, Bogdan Virlan, Leonard Livadaru, and Alecsandru Simion. "Five phase permanent magnet synchronous generator distributed winding to fractional slot concentrated winding." In 2017 International Conference on Electromechanical and Power Systems (SIELMEN). IEEE, 2017. http://dx.doi.org/10.1109/sielmen.2017.8123316.
Повний текст джерелаBoglietti, Aldo, Marco Cossale, Silvio Vaschetto, and Thiago Dutra. "Thermal parameters evaluation for stator fractional-slot concentrated winding machines." In 2016 IEEE 25th International Symposium on Industrial Electronics (ISIE). IEEE, 2016. http://dx.doi.org/10.1109/isie.2016.7744894.
Повний текст джерелаJussila, H., P. Salminen, M. Niemela, and J. Pyrhonen. "Guidelines for Designing Concentrated Winding Fractional Slot Permanent Magnet Machines." In 2007 International Conference on Power Engineering, Energy and Electrical Drives. IEEE, 2007. http://dx.doi.org/10.1109/powereng.2007.4380186.
Повний текст джерелаHuilin Kang, Libing Zhou, and Jin Wang. "Harmonic winding factors and MMF analysis for five-phase fractional-slot concentrated winding PMSM." In 2013 International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2013. http://dx.doi.org/10.1109/icems.2013.6713375.
Повний текст джерелаMiyamoto, Yasuhiro, Tsuyoshi Higuchi, Takashi Abe, and Yuichi Yokoi. "Fractional slot winding design method of Permanent-Magnet Synchronous Machines using Slot Star Diagram." In 2013 International Conference on Electrical Machines and Systems (ICEMS). IEEE, 2013. http://dx.doi.org/10.1109/icems.2013.6713354.
Повний текст джерела