Статті в журналах: "FpDBS"

1

Bertaso, Anna, Daniela Sorio, Anthula Vandoros, Elio F. De Palo, Federica Bortolotti, and Franco Tagliaro. "Use of finger-prick dried blood spots (fpDBS) and capillary electrophoresis for carbohydrate deficient transferrin (CDT) screening in forensic toxicology." ELECTROPHORESIS 37, no. 21 (June 7, 2016): 2867–74. http://dx.doi.org/10.1002/elps.201500588.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Modi, Ritesh, Shivani Kohli, K. Rajeshwari, and Shekhar Bhatia. "A three-dimension finite element analysis to evaluate the stress distribution in tooth supported 5-unit intermediate abutment prosthesis with rigid and nonrigid connector." European Journal of Dentistry 09, no. 02 (April 2015): 255–61. http://dx.doi.org/10.4103/1305-7456.156847.

Повний текст джерела

Анотація:

ABSTRACT Objective: The aim of the study is to evaluate the stress distribution in tooth supported 5-unit fixed partial denture (FPD) having tooth as pier abutment using rigid and nonrigid connectors respectively, under simultaneous and progressive loading. Material and Methods: The three-dimensional (3D) finite element program (ANSYS software) was used to construct the mathematical model. Two 5-unit FPD'S were simulated, one with rigid connector and another one with nonrigid connector. For analysis, each of these models were subjected to axial and oblique forces under progressive loading (180, 180, 120, 120, 80 N force on first and second molars, premolars and canine respectively) and simultaneous loading (100, 100, 100, 100, 100 N force on first and second molars, premolars and canine respectively). Results: The rigid and nonrigid connector design have effect on stress distribution in 5-unit FPDs with pier abutments. Conclusion: Oblique forces produce more stresses than vertical forces. Nonrigid connector resulted in decrease in stress at the level of prosthesis and increase in stress at the level of alveolar crest.

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Liu, Kang, Yan Li, Wu Zhao, and Wen Qiang Li. "Research of Ontology Based FPBS Design Model." Applied Mechanics and Materials 275-277 (January 2013): 2595–600. http://dx.doi.org/10.4028/www.scientific.net/amm.275-277.2595.

Повний текст джерела

Анотація:

The conceptual design model for mechanical product and its computer aided design are the important and focus problems. A mechanical product design process of FPBS model, function-principle-behavior-structure model, was put forward and discussed. The semantic relationships between the elements of FPBS model were studied to make foundation for the application of FPBS model. The operational demand of knowledge system for FPBS model was analyzed, and indicates the ontology can be applied effectively to knowledge system operation of FPBS model. Then, an ontology based FPBS model was established and a FPBS ontology model system was constructed. The experimental results indicate the model can be used in computer aided conceptual design for mechanical product effectively.

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Abdulaziz, O., I. Hashim, and A. Saif. "Series Solutions of Time-Fractional PDEs by Homotopy Analysis Method." Differential Equations and Nonlinear Mechanics 2008 (2008): 1–16. http://dx.doi.org/10.1155/2008/686512.

Повний текст джерела

Анотація:

The homotopy analysis method (HAM) is applied to solve linear and nonlinear fractional partial differential equations (fPDEs). The fractional derivatives are described by Caputo's sense. Series solutions of the fPDEs are obtained. A convergence theorem for the series solution is also given. The test examples, which include a variable coefficient, inhomogeneous and hyperbolic-type equations, demonstrate the capability of HAM for nonlinear fPDEs.

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Cristea, Ioana, Doriana Agop-Forna, Maria-Alexandra Martu, Cristina Dascălu, Claudiu Topoliceanu, Roland Török, Bianca Török, Dimitrios Bardis, Panagiota Moulavasili Bardi, and Norina Forna. "Oral and Periodontal Risk Factors of Prosthetic Success for 3-Unit Natural Tooth-Supported Bridges versus Implant-Supported Fixed Dental Prostheses." Diagnostics 13, no. 5 (February 23, 2023): 852. http://dx.doi.org/10.3390/diagnostics13050852.

Повний текст джерела

Анотація:

The goals of this research are: (1) to compare the survival and prosthetic success of metal-ceramic 3-unit tooth- versus implant-supported fixed dental prostheses; (2) to evaluate the influence of several risk factors on the prosthetic success of tooth- and implant-supported fixed dental prostheses (FPDs). A total of 68 patients with posterior short edentulous spaces (mean age 61.00 ± 1.325 years), were divided into two groups: 3-unit tooth-supported FPDs (40 patients; 52 FPD; mean follow-up 10.27 ± 0.496 years) and 3-unit implant-supported FPDs (28 patients; 32 FPD; mean follow-up 8.656 ± 0.718 years). Pearson-chi tests were used to highlight the risk factors for the prosthetic success of tooth- and implant-supported FPDs and multivariate analysis was used to determine significant risk predictors for the prosthetic success of the tooth-supported FPDs. The survival rates of 3-unit tooth- versus implant-supported FPDs were 100% and 87.5%, respectively, while the prosthetic success was 69.25% and 68.75%, respectively. The prosthetic success of tooth-supported FPDs was significantly higher for patients older than 60 years (83.3%) vs. 40–60 years old (57.1%) (p = 0.041). Periodontal disease history decreased the prosthetic success of tooth- versus implant-supported FPDs when compared with the absence of periodontal history (45.5% vs. 86.7%, p = 0.001; 33.3% vs. 90%, p = 0.002). The prosthetic success of 3-unit tooth- vs. implant-supported FPDs was not significantly influenced by gender, location, smoking, or oral hygiene in our study. In conclusion, similar rates of prosthetic success were recorded for both types of FPDs. In our study, prosthetic success of tooth- versus implant-supported FPDs was not significantly influenced by gender, location, smoking, or oral hygiene; however, history of periodontal disease is a significant negative predictor of success in both groups when compared with patients without periodontal history.

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Piovesan, Edno Moacir, Flávio Fernando Demarco, and Evandro Piva. "Fiber-reinforced fixed partial dentures: a preliminary retrospective clinical study." Journal of Applied Oral Science 14, no. 2 (April 2006): 100–104. http://dx.doi.org/10.1590/s1678-77572006000200007.

Повний текст джерела

Анотація:

The aim of this study was to evaluate the clinical performance (retention rate) of fiber-reinforced composite fixed partial dentures (FPDs). Polyethylene fiber (Ribbond®) was used combined with restorative composite during FPDs fabrication. FPDs were placed in thirteen patients in a private clinic. Nineteen FPDs were evaluated. The prosthetic space was filled with only one pontic using extracted teeth (2 cases), acrylic resin teeth (11 cases), or with composite resin (6 cases), combined with Polyethylene fiber. The clinical criterion used was based on retention rate of FPDs. If FPDs were in function in the mouth at the time of examination without previous repair they were classified as Complete Survival (CS) restorations. A classification of Survival with Rebonding (SR) was assigned in the event of an adhesive failure, but after rebonding the FPD still remained under evaluation. Treatment was classified as a Failure (F) if the FPD restoration was lost. The time of evaluation was 41.15 months (±15.13). The FPDs evaluated were retained (CS=94.75%), and no failure was found except for in one situation which required rebonding (SR=5.25%). According to the survival estimation method of Kaplan-Meyer the mean survival time was 42.3 months. At the time of evaluation investigated, polyethylene-reinforced FPDs showed a favorable retention rate in preliminary data.

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Kim, Jeongah, Bo-Young Kim, Seong Dae Park, Ji-Hun Seo, Chan-Jae Lee, Myong Jae Yoo, and Youngmin Kim. "Mechanical Durability of Flexible Printed Circuit Boards Containing Thin Coverlays Fabricated with Poly(Amide-Imide-Urethane)/Epoxy Interpenetrating Networks." Micromachines 12, no. 8 (August 10, 2021): 943. http://dx.doi.org/10.3390/mi12080943.

Повний текст джерела

Анотація:

Because electronics are becoming flexible, the demand for techniques to manufacture thin flexible printed circuit boards (FPCBs) has increased. Conventional FPCBs are fabricated by attaching a coverlay film (41 μm) onto copper patterns/polyimide (PI) film to produce the structure of coverlay/Cu patterns/PI film. Given that the conventional coverlay consists of two layers of polyimide film and adhesive, its thickness must be reduced to generate thinner FPCBs. In this study, we fabricated 25-μm-thick poly(amide-imide-urethane)/epoxy interpenetrating networks (IPNs) to replace the thick conventional coverlay. Poly(amide-imide-urethane) (PAIU) was synthesized by reacting isocyanate-capped polyurethane with trimellitic anhydride and then mixed with epoxy resin to produce PAIU/epoxy IPNs after curing. Thanks to the soft segments of polyurethane, the elongation of PAIU/epoxy IPNs increased with increasing PAIU content and reached over 200%. After confirming the excellent thermal stability and chemical resistance of the PAIU/epoxy IPNs, we fabricated FPCBs by equipping them as coverlays. The mechanical durability of the FPCBs was evaluated through an MIT folding test, and the FPCB fabricated with PAIU/ep-2 was stable up to 164 folding cycles because of the balanced mechanical properties.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Zhao, Jingjun, Jingyu Xiao, and Yang Xu. "Stability and Convergence of an Effective Finite Element Method for Multiterm Fractional Partial Differential Equations." Abstract and Applied Analysis 2013 (2013): 1–10. http://dx.doi.org/10.1155/2013/857205.

Повний текст джерела

Анотація:

A finite element method (FEM) for multiterm fractional partial differential equations (MT-FPDEs) is studied for obtaining a numerical solution effectively. The weak formulation for MT-FPDEs and the existence and uniqueness of the weak solutions are obtained by the well-known Lax-Milgram theorem. The Diethelm fractional backward difference method (DFBDM), based on quadrature for the time discretization, and FEM for the spatial discretization have been applied to MT-FPDEs. The stability and convergence for numerical methods are discussed. The numerical examples are given to match well with the main conclusions.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

De Angelis, Paolo, Giulio Gasparini, Francesca Camodeca, Silvio De Angelis, Margherita Giorgia Liguori, Edoardo Rella, Francesca Cannata, Antonio D’Addona, and Paolo Francesco Manicone. "Technical and Biological Complications of Screw-Retained (CAD/CAM) Monolithic and Partial Veneer Zirconia for Fixed Dental Prostheses on Posterior Implants Using a Digital Workflow: A 3-Year Cross-Sectional Retrospective Study." BioMed Research International 2021 (July 6, 2021): 1–9. http://dx.doi.org/10.1155/2021/5581435.

Повний текст джерела

Анотація:

Objective. The introduction of CAD/CAM and the development of zirconia-based restorations have allowed clinicians to use less expensive materials and faster manufacturing procedures. The purpose of the study was to analyze the differences, in terms of mechanical and biological complication, in multiunit zirconia fixed dental prosthesis (FPDs) on posterior implants produced using a digital workflow. Method and Materials. This study was a retrospective investigation, and patients treated with screw-retained monolithic or partial veneer FPDs on dental implants were selected. Periapical radiographs were taken at baseline and at the 3-year follow-up. Complications were recorded and classified as technical and biological ones. Results. The study population included 25 patients. The occlusal and interproximal corrections were not clinically significant. In the study sample, the survival rate and success rate of the FPDs after 3 years were 100% and 96%, respectively. One implant failed immediately after placement. Conclusion. Monolithic zirconia FPDs and partial veneer FPDs showed a 100% survival rate, presenting an interesting alternative to metal ceramic restorations. The partial veneer FPDs had a higher technical complication rate than the monolithic FPDs; however, no statistically significant difference was found.

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Arruda, Luciano, Cristiano Coimbra, and João Marco Andolfatto. "Direct and Indirect Strain Measurement of Flexible Printed Circuit Boards - fPCBs." Advanced Materials Research 655-657 (January 2013): 88–93. http://dx.doi.org/10.4028/www.scientific.net/amr.655-657.88.

Повний текст джерела

Анотація:

This work is related to reliability of strain measurement in flexible printed circuit boards (fPCBs) made with polyimide substrate. It was observed that the fPCBs are very sensitive to strain mounting stiffness. The indirect measurement method will be done employing High Speed Camera (HSP). The direct method will be formulated in two ways: 1) conventional strain gauge glued in an fPCBs; 2) printed strain gauge in a polyimide substrate. This paper will point out mistakes and show advantages when using different method to extract the deformation field of the selected area in a flexible thin film.

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Zhenying, Wang, Shi Yanming, Xu Huibo, Zhang Lijun, Zhou Shiqing, Gao Chunyan, and Huang Yu. "Development of Fuel Product Barrier Monitoring System Based on State Functions in State-Oriented Emergency Operating Procedure." Science and Technology of Nuclear Installations 2021 (May 10, 2021): 1–9. http://dx.doi.org/10.1155/2021/5596804.

Повний текст джерела

Анотація:

For pressurized water reactor nuclear power plants, in order to prevent the release of radioactive substances into environment, fission product barriers (FPBs) are constructed based on the concept of defense-in-depth, including fuel clad, reactor coolant system (RCS), and containment; the status of these FPBs is then acting as an important dimension to decision-making of emergency action levels (EALs). For CPR1000 nuclear power plants, state functions defined in state-oriented emergency operating procedure (SOP) are used to characterize postaccident physical conditions; their degradation substantially represents the challenges on fundamental safety functions and then on the integrity of FPBs in like manner, so degradation of these state functions is referred to as determining initial conditions of each FPB, by which the link between SOP and EALs is established. Then, an intelligent FPB monitoring system (FPBMS) aiming to automatically monitor states of FPBs is developed, verified, and validated. The pioneering work, by building bridges between state functions and initial conditions of FPBs and then computerizing them innovatively, proves that dynamical monitoring of states of FPBs during accident evolvement and real-time indication of loss or potential loss of FPBs can be achieved, which is most helpful in decision-making of EALs.

Стилі APA, Harvard, Vancouver, ISO та ін.

12

Krusius, J. P., D. P. Seraphim, R. G. Greene, D. S. Skinner, and B. Yost. "Approaches toward ultralarge FPDs." Proceedings of the IEEE 90, no. 4 (April 2002): 559–80. http://dx.doi.org/10.1109/jproc.2002.1002527.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Kim, David H., Sang Jo Kim, Jiabin Liu, Jonathan Beathe, and Stavros G. Memtsoudis. "Fascial plane blocks: a narrative review of the literature." Regional Anesthesia & Pain Medicine 46, no. 7 (June 18, 2021): 600–617. http://dx.doi.org/10.1136/rapm-2020-101909.

Повний текст джерела

Анотація:

Fascial plane blocks (FPBs) are increasingly numerous and are often touted as effective solutions to many perioperative challenges facing anesthesiologists. As ‘new’ FPBs are being described, questions regarding their effectiveness remain unanswered as appropriate studies are lacking and publications are often limited to case discussions or technical reports. It is often unclear if newly named FPBs truly represent a novel intervention with new indications, or if these new publications describe mere ultrasound facilitated modifications of existing techniques. Here, we present broad concepts and potential mechanisms of FPB. In addition, we discuss major FPBs of (1) the extremities (2) the posterior torso and (3) the anterior torso. The characteristics, indications and a brief summary of the literature on these blocks is included. Finally, we provide an estimate of the overall level of evidence currently supporting individual approaches as FPBs continue to rapidly evolve.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Hinz, Sebastian, Tobias Bensel, Wolfgang Bömicke, Anders Henningsen, Judith Rudolph, and Arne F. Boeckler. "Impact of the Veneering Technique and Framework Material on the Failure Loads of All-Ceramic Computer-Aided Design/Computer-Aided Manufacturing Fixed Partial Dentures." Materials 15, no. 3 (January 19, 2022): 756. http://dx.doi.org/10.3390/ma15030756.

Повний текст джерела

Анотація:

Objectives: Zirconia (Y-TZP) ceramics are considered as posterior fixed partial denture (FPD) materials; however, their applications are limited due to chipping. The use of monolithic lithium disilicate (LiDi) glass ceramics in posterior FPDs can be advantageous. This in vitro study aims to compare the loads until failure of posterior Y-TZP-FPDs and LiDi-FPDs before and after aging.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Juan-Juan, Ji, Guo Ye-Cai, Zhang Lan-Fang, and Zhang Chao-Long. "A Table Lookup Method for Exact Analytical Solutions of Nonlinear Fractional Partial Differential Equations." Mathematical Problems in Engineering 2017 (2017): 1–14. http://dx.doi.org/10.1155/2017/6328438.

Повний текст джерела

Анотація:

A table lookup method for solving nonlinear fractional partial differential equations (fPDEs) is proposed in this paper. Looking up the corresponding tables, we can quickly obtain the exact analytical solutions of fPDEs by using this method. To illustrate the validity of the method, we apply it to construct the exact analytical solutions of four nonlinear fPDEs, namely, the time fractional simplified MCH equation, the space-time fractional combined KdV-mKdV equation, the (2+1)-dimensional time fractional Zoomeron equation, and the space-time fractional ZKBBM equation. As a result, many new types of exact analytical solutions are obtained including triangular periodic solution, hyperbolic function solution, singular solution, multiple solitary wave solution, and Jacobi elliptic function solution.

Стилі APA, Harvard, Vancouver, ISO та ін.

16

GU, Y. T., P. ZHUANG, and Q. LIU. "AN ADVANCED MESHLESS METHOD FOR TIME FRACTIONAL DIFFUSION EQUATION." International Journal of Computational Methods 08, no. 04 (November 20, 2011): 653–65. http://dx.doi.org/10.1142/s0219876211002745.

Повний текст джерела

Анотація:

Recently, because of the new developments in sustainable engineering and renewable energy, which are usually governed by a series of fractional partial differential equations (FPDEs), the numerical modeling and simulation for fractional calculus are attracting more and more attention from researchers. The current dominant numerical method for modeling FPDE is finite difference method (FDM), which is based on a pre-defined grid leading to inherited issues or shortcomings including difficulty in simulation of problems with the complex problem domain and in using irregularly distributed nodes. Because of its distinguished advantages, the meshless method has good potential in simulation of FPDEs. This paper aims to develop an implicit meshless collocation technique for FPDE. The discrete system of FPDEs is obtained by using the meshless shape functions and the meshless collocation formulation. The stability and convergence of this meshless approach are investigated theoretically and numerically. The numerical examples with regular and irregular nodal distributions are used to validate and investigate accuracy and efficiency of the newly developed meshless formulation. It is concluded that the present meshless formulation is very effective for the modeling and simulation of FPDEs.

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Rosentritt, Martin, Michael Behr, Carola Kolbeck, and Gerhard Handel. "Marginal Integrity of CAD/CAM Fixed Partial Dentures." European Journal of Dentistry 01, no. 01 (January 2007): 025–30. http://dx.doi.org/10.1055/s-0039-1698308.

Повний текст джерела

Анотація:

ABSTRACTObjectives: Computer-aided design (CAD) and manufacturing (CAM) allows the milling of high strength zirconia fixed partial dentures (FPD), however bonding to an inert ZrO2 ceramic surface may effect the marginal integrity of the FPDs. The aim of this investigation was to evaluate the marginal adaptation of zirconia FPDs at the interfaces between zirconia, cement, and tooth.Methods: Methods: 32 3-unit FPDs were fabricated of the CAD/CAM Y-TZP zirconia (Lava, 3M Espe, Germany) according to the manufacturers’ instructions. Resin cements with corresponding primer and bonding systems were used to lute the FPDs: Compolute/EBS multi (3M Espe, Germany), Panavia F/ED (Kuraray, Japan), Variolink 2/Syntac classic (Ivoclar-Vivadent, FL) and RelyX Unicem/without treatment (3M Espe, Germany). Au-alloy FPDs (BioPontostar, Bego, Germany) were cemented with RelyX Unicem and Harvard (Harvard, Germany) as the control. Marginal adaptation was evaluated with scanning electron microscopy using replica specimen before and after artificial aging. After aging, microleakage tests were performed with fuchsine solution. The interfaces between cement-tooth and cement-FPD were examined.Results: At the interfaces (cement-tooth and cement-FPD), the systems showed a 95% or higher perfect margin before and after aging. Only Variolink2/Syntac had a marginal adaptation, lower than a 70% perfect margin. Generally, the fuchsine penetration was below 20%, only BioPontstar/Harvard and Lava/Variolink2 showed penetration results between 80% and 100%.Conclusion: The success of the adhesive cementation of zirconia FPDs depends on the cement system. Under the conditions of this study, zirconia FPDs showed good to sufficient marginal integrity in combination with Panavia/ED, Compolute/EBS and RelyX Unicem. (Eur J Dent 2007;1:25-30)

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Xia, Chang, Da Bao Fu, Bin Huang, and Li Ying Liu. "Dynamic Characteristic Analysis of Mega-Sub Controlled Structure with Friction Pendulum Bearings." Advanced Materials Research 926-930 (May 2014): 550–56. http://dx.doi.org/10.4028/www.scientific.net/amr.926-930.550.

Повний текст джерела

Анотація:

A novelty configuration of tall building structure, so-called mega-sub controlled structure (MSCS) with friction pendulum bearings (FPBs), which is featured by the FPBs at the bottom of sub-structures, is studied. The seismic responses of the MSCS with FPBs are carried out. The effects of the radius of the sliding surface and friction coefficient on structural dynamic characteristic indices, i.e. energy, acceleration, story displacement, story shear force, are analyzed. A performance comparison is made with the conventional MSCS. The results show that the MSCS with FPBs exhibits a better vibration-control effect than conventional MSCS. The controlling effectiveness of structure with radius of 500mm and 1500mm is better than that with radius of 1000mm and 2000mm. As the friction coefficient increase, the dynamic behaviors of structure tend to increase.

Стилі APA, Harvard, Vancouver, ISO та ін.

19

Maru, Johsias A., Nicole D. Carvajal, Alejandra G. de Alba Campomanes, Neeti Parikh, Davin C. Ashraf, Robert C. Kersten, Bryan J. Winn, M. Reza Vagefi, and Seanna R. Grob. "Perceived Barriers to Increasing Diversity within Oculofacial Plastic Surgery." Journal of Academic Ophthalmology 14, no. 02 (July 2022): e271-e278. http://dx.doi.org/10.1055/s-0042-1758561.

Повний текст джерела

Анотація:

Abstract Purpose Physician diversity is limited in ophthalmology and oculofacial plastic surgery. Determination of barriers within the application process for oculofacial plastic surgery may help target efforts to improve the recruitment of underrepresented groups. This study aimed to illuminate perceived barriers to increasing diversity in oculofacial plastic surgery trainees, according to the American Society of Ophthalmic Plastic and Reconstructive Surgery (ASOPRS) fellows and fellowship program directors (FPDs). Methods During the month of February 2021, we sent surveys out to 54 current oculofacial plastic surgery fellows and 56 FPDs at 56 oculofacial plastic surgery programs recognized by the ASOPRS nationwide using a 15-question Qualtrics survey. Results Sixty-three individuals (57%) responded to the survey: 34 fellows (63%) and 29 FPDs (52%). Eighty-eight percent of fellows and 68% of FPDs identified as non-underrepresented in medicine (UiM). Forty-four percent of fellows and 25% of FPDs identified as men. FPDs most commonly noted, “Not enough minorities applying to our program” and “The objective data (Ophthalmic Knowledge Assessment Program score, United States Medical Licensing Examination Step scores, clinical honors, Alpha Omega Alpha status, letter of recommendation) for minority applicants often do not meet the threshold required to offer an interview or to be ranked to match” as barriers. Among fellows, the lowest-rated considerations when applying to oculofacial plastic surgery were “Racially/ethnically diverse faculty” and “Perceptions of minority candidates by fellowship programs,” whereas “Likelihood of matching in program of choice” was ranked highest in considerations. Fellows identifying as men indicated greater concern for “Financial factors related to fellowship (e.g., loans, salary, cost of living, or cost of interviewing)” compared to fellows identifying as women who noted greater concern for “Program or preceptor acceptance of starting or having a family during fellowship.” Conclusion Responses from FPDs suggest that efforts focused on recruiting and supporting diverse students to medicine and ophthalmology, mentoring applicants interested in oculofacial plastic surgery, and restructuring the application process to decrease bias, may improve diversity within the subspecialty. The lack of UiM representation in this study, 6% fellows and 7.4% FPDs identified as UiM, shows both the stark underrepresentation and the need for further research into this topic.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Chaiyasut, Chaiyavat, Netnapa Makhamrueang, Sartjin Peerajan, and Bhagavathi Sundaram Sivamaruthi. "ASSESSMENT OF ORGANIC ACID CONTENT, AND BRIX VALUE OF REPRESENTATIVE INDIGENOUS FERMENTED PLANT BEVERAGES OF THAILAND." Asian Journal of Pharmaceutical and Clinical Research 10, no. 1 (January 1, 2016): 350. http://dx.doi.org/10.22159/ajpcr.2017.v10i1.15455.

Повний текст джерела

Анотація:

ABSTRACTObjective: In Thailand, people believe that the fermented plant beverages (FPBs) have the pharmaceutical effects and consumption of FPBs cure thediseases. This study was conducted to detect and quantify the organic acids, pH, and Brix value of the commonly using FPBs of Thailand.Methods: The samples were collected from all the region of Thailand. The total acidity, pH, and organic acid content were measured by titration, pHmeter, and high-performance liquid chromatography methods, respectively. The sugar content of the sample was assessed by Brix value determinationusing a refractometer.Results: All the tested FPBs showed the pH value of 2-4 except sample no. 64 (pH 6.49) and 65 (pH 5.72). The acidity of the samples showed a rangeof ~0.1-2.5% of lactic acid equivalent. The acidity of sample no. 64 and 65 was not in detectable level. As per the Thai Community Product Standard(TCPS) - No. 481/2004, all the samples were qualified for the human consumption except sample no. 64 and 65. About 34, 17, 58, 53, 8, 6, 12, and1 samples were detected with 0.018-0.241, 0.015-0.389, 0.028-1.244, 0.052-0.550, 0.024-0.267, 0.049-0.373, 0.025-0.980, and 0.31 mg/mL of as tartaric,malic, lactic, acetic, citric, sorbic, fumaric, and propionic acids, respectively. The sugar content of the sample no. 9 and 49 was >55 % of Brix value, whileother tested samples were <50%.Conclusion: All the tested FPBs were harmless to human regarding organic acid content, pH, and Brix value except sample no. 64 and 65 as per theTCPS. Further studies are mandatory to explore the microbial and pharmaceutical nature of traditional FPBs and other fermented foods of Thailand.Keywords: Brix value, Fermented plant beverages, Morinda, Organic acids, pH.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Gurefe, Yusuf. "The generalized Kudryashov method for the nonlinear fractional partial differential equations with the beta-derivative." Revista Mexicana de Física 66, no. 6 Nov-Dec (November 5, 2020): 771. http://dx.doi.org/10.31349/revmexfis.66.771.

Повний текст джерела

Анотація:

In this article, we consider the exact solutions of the Hunter-Saxton and Schrödinger equations defined by Atangana's comformable derivative using the general Kudryashov method. Firstly, Atangana's comformable fractional derivative and its properties are included. Then, by introducing the generalized Kudryashov method, exact solutions of nonlinear fractional partial differential equations (FPDEs), which can be expressed with the comformable derivative of Atangana, are classified. Looking at the results obtained, it is understood that the generalized Kudryashov method can yield important results in obtaining the exact solutions of FPDEs containing beta-derivatives.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Qazza, Ahmad, Aliaa Burqan, Rania Saadeh, and Raed Khalil. "Applications on Double ARA–Sumudu Transform in Solving Fractional Partial Differential Equations." Symmetry 14, no. 9 (September 1, 2022): 1817. http://dx.doi.org/10.3390/sym14091817.

Повний текст джерела

Анотація:

In this article, we apply the double ARA–Sumudu transformation (DARA-ST) to the nonlocal fractional Caputo derivative operator. We achieve interesting results and implement them to solve certain classes of fractional partial differential equations (FPDEs). Several physical applications are discussed and analyzed, such as telegraph, Klein–Gordon and Fokker–Planck equations. The new technique with DARA-ST is efficient and accurate in examining exact solutions of FPDEs. In order to show the applicability of the presented method, some numerical examples and figures are illustrated. A symmetry analysis is used to verify the results.

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Javeed, Shumaila, Dumitru Baleanu, Asif Waheed, Mansoor Shaukat Khan, and Hira Affan. "Analysis of Homotopy Perturbation Method for Solving Fractional Order Differential Equations." Mathematics 7, no. 1 (January 3, 2019): 40. http://dx.doi.org/10.3390/math7010040.

Повний текст джерела

Анотація:

The analysis of Homotopy Perturbation Method (HPM) for the solution of fractional partial differential equations (FPDEs) is presented. A unified convergence theorem is given. In order to validate the theory, the solution of fractional-order Burger-Poisson (FBP) equation is obtained. Furthermore, this work presents the method to find the solution of FPDEs, while the same partial differential equation (PDE) with ordinary derivative i.e., for α = 1 , is not defined in the given domain. Moreover, HPM is applied to a complicated obstacle boundary value problem (BVP) of fractional order.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Bachman, Sarah A., Johan Lundberg, and Michael Herrick. "Avoid suboptimal perioperative analgesia during major surgery by enhancing thoracic epidural catheter placement and hemodynamic performance." Regional Anesthesia & Pain Medicine 46, no. 6 (March 2, 2021): 532–34. http://dx.doi.org/10.1136/rapm-2020-102352.

Повний текст джерела

Анотація:

Thoracic epidural analgesia (TEA) is an established gold standard for postoperative pain control especially following laparotomy and thoracotomy. The safety and efficacy of TEA is well known when the attention to patient selection is upheld. Recently, the use of fascial plane blocks (FPBs) has evolved as an alternative to TEA most likely because these blocks avoid problems such as neurological comorbidity, coagulation disorders, epidural catheter failure and hypotension due to sympathetic denervation. However, if an FPB is performed, postoperative monitoring and adjuvant treatments are still necessary. Also, the true efficacy of FPBs is questioned. Thus, should we prioritize less efficient analgesic regimens with FPBs when preventive treatment strategies for epidural catheter failure and hypotension exist for TEA? It is time to promote and underscore the benefits of TEA provided to patients undergoing major open surgical procedures. In our mind, FPBs and landmark-guided techniques should be limited to less extensive surgery and when either neuraxial blockade is contraindicated or resources for optimal epidural catheter placement and maintenance are not available.

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Dong, Gaoya, Weimin Wang, and Yuanan Liu. "Compact filtering power dividers with wide upper stopband." International Journal of Microwave and Wireless Technologies 11, no. 08 (July 11, 2019): 765–73. http://dx.doi.org/10.1017/s1759078719000655.

Повний текст джерела

Анотація:

AbstractA series of compact filtering power dividers (FPDs) with simple layouts are proposed based on coupling topology. The structure of the presented FPD1 is composed of three resonators and one isolating resistor. These FPDs can be designed based on coupling matrix filter theory. A half-wave transmission line is employed in FPD2 to introduce a transmission zero (TZ) locating at 1.27f0. The FPD3 is designed by replacing quarter-wave transmission lines in FPD2 with quarter-wave coupled lines, which will produce a TZ locating at 1.96 f0 and extend upper stopband bandwidth. For verification, three FPDs centered at 2.45 GHz are fabricated and measured. All measured results are in good agreement with the full-wave simulation results.

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Agustín-Panadero, R., B. Serra-Pastor, A. Fons-Font, and MF Solá-Ruíz. "Prospective Clinical Study of Zirconia Full-coverage Restorations on Teeth Prepared With Biologically Oriented Preparation Technique on Gingival Health: Results After Two-year Follow-up." Operative Dentistry 43, no. 5 (September 1, 2018): 482–87. http://dx.doi.org/10.2341/17-124-c.

Повний текст джерела

Анотація:

SUMMARY Objectives: To evaluate the clinical behavior of one-piece complete-coverage crowns and fixed partial dentures (FPDs) on teeth with vertical preparation without finish line biologically oriented preparation technique (BOPT). Methods and Materials: This prospective study included 52 patients requiring treatment with restorations in the esthetic region: 74 crowns and 27 FPDs. The sample included a total of 149 teeth that were prepared vertically without finish line. The sample was divided into two groups: one-piece crowns and FPDs, all with zirconia cores, feldspathic ceramic veneer, and a 0.5-mm prosthetic finish line of zirconia. All procedures were carried out at the University of Valencia from 2013 to 2014. The following parameters were evaluated over a two-year follow-up: oral hygiene, periodontal state, gingival thickening, gingival margin stability, the presence of complications, and restoration survival rate. Patient satisfaction with treatment was assessed by means of a visual analogue scale (VAS). Results: Two years after treatment, 80.5% of treated teeth remained free of gingival inflammation and bleeding. Mean gingival thickening was 0.41 ± 0.28 mm for one-piece crowns and 0.38 ± 0.36 mm for FPDs. Gingival margin stability was 100%, but 2% of the sample presented biological complications. The VAS patient satisfaction scores were eight out of a maximum score of 10. Conclusions: Two years after treatment, vertical preparation without finish line produces gingival thickening, margin stability, and optimal esthetics. Neither crowns nor FPDs presented any mechanical complications.

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Alderremy, Aisha Abdullah, Hassan Khan, Qasim Khan, Poom Kumam, Shaban Aly, Said Ahmad, and Kanokwan Sitthithakerngkiet. "The solutions of nonlinear fractional partial differential equations by using a novel technique." Open Physics 20, no. 1 (January 1, 2022): 750–63. http://dx.doi.org/10.1515/phys-2022-0069.

Повний текст джерела

Анотація:

Abstract In this article, the solutions of higher nonlinear partial differential equations (PDEs) with the Caputo operator are presented. The fractional PDEs are modern tools to model various phenomena more accurately. The residual power series method (RPSM) is used for the solution analysis of fractional partial differential equations (FPDEs), which has direct implementation for the solutions of fractional partial differential equations. In this work, the solutions to a few nonlinear FPDEs are handled by the proposed technique. The general and particular schemes of RPSM are constructed and implemented successfully. The fractional solutions of PDEs have provided many useful dynamics of the targeted problems. The RPSM results for both integer and fractional-order FPDEs are further explained and elaborated by using graphs and tables. It is observed that the higher accuracy of RPSM is achieved with fewer calculations. Graphs and tables for fractional-order solutions are presented, which confirm the convergence phenomena of fractional solutions toward integer order solutions of each problem. The suggested method can be extended to the solutions of other nonlinear fractional partial differential equations.

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Woo, Seungmin, Jaehyeok Choi, Kwangjong Choi, Bokyeong Kang, Hwasun Park, and Youngoo Yang. "Analysis of Microstrip Line With Asymmetric Arch Type Cross-Sectional Structure Using Micro Pattern Transfer Printing Method." Sensors 22, no. 15 (July 27, 2022): 5613. http://dx.doi.org/10.3390/s22155613.

Повний текст джерела

Анотація:

This paper presents the manufacturing procedure and electrical properties of a microstrip line on flexible printed circuit boards (FPCBs) fabricated using the micro pattern transfer printing (MPTP) method for millimeter wave band application. The MPTP method presented herein is compared to the conventional FPCB process based on the degree of insertion loss as it pertains to the cross-sectional shape of the formed microstrip line. Electromagnetic field simulations were performed to confirm that the cross-sectional arch shape fabricated by the MPTP process reduces insertion loss in the high-frequency band. Based on the simulation, the microstrip transmission line was optimized to a width of 217 µm and a length of 30 cm, fabricated on a 50 µm thick poly-cyclohexylene dimethylene terephthalate (PCT) substrate to measure the insertion loss. The insertion loss fabricated using the MPTP method is measured as 0.37 dB/cm at 10 GHz, while the conventional FPCB is measured as 0.66 dB/cm. Through the analysis, it was confirmed that the FPCBs manufactured by the MPTP process show lower insertion loss compared to the conventional FPCBs.

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Lu, Zheng, Mingdi Wang, Pengcheng Zhang, and Chuanzhu Li. "Femtosecond Laser Machining of Flexible Printed Circuit Boards." Journal of Physics: Conference Series 2185, no. 1 (January 1, 2022): 012082. http://dx.doi.org/10.1088/1742-6596/2185/1/012082.

Повний текст джерела

Анотація:

Abstract As the demand grows for high-density electronic components and highly integrated printed circuit boards, femtosecond laser micromachining provides unique opportunities for creating fine conductive tracks and patterns on flexible printed circuit boards (FPCBs) without the use of a mask. Here, the effects of femtosecond laser power and pulse frequency on micromachining depth, surface roughness and copper content of the machined zone were investigated, and optimum laser parameters, i.e., laser power 280 mW and pulse repetition frequency 39.5 kHz, were achieved with the help of a 3D optical profilometer and energy dispersive spectroscopy (EDS). On this basis, a single conductive track with varying widths and two parallel conductive tracks with different widths/spacings were micromachined on FPCBs without noticeable substrate damage. The results indicate that a single conductive line with a feature width as small as 25 µm can be achieved, and two parallel copper tracks can be created with no evidence of the presence of copper residues between the tracks when the pre-defined spacing is no less than 45 µm . In order to achieve high micromachining accuracy, look-up tables that correlate measured widths/spacing of conductive tracks with the pre-defined ones were built.besides, machining conductive tracks with 135 degree corner is possible and by selecting optimized processing parameters. Finally, a driving circuit for a display panel was micromachined on FPCBs using femtosecond laser, and an average micromachining accuracy of 0.67 μm was achieved. This work will be quite useful for creating high density and precision patterns on FPCBs using femtosecond laser.

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Yin, Fukang, Junqiang Song, Yongwen Wu, and Lilun Zhang. "Numerical Solution of the Fractional Partial Differential Equations by the Two-Dimensional Fractional-Order Legendre Functions." Abstract and Applied Analysis 2013 (2013): 1–13. http://dx.doi.org/10.1155/2013/562140.

Повний текст джерела

Анотація:

A numerical method is presented to obtain the approximate solutions of the fractional partial differential equations (FPDEs). The basic idea of this method is to achieve the approximate solutions in a generalized expansion form of two-dimensional fractional-order Legendre functions (2D-FLFs). The operational matrices of integration and derivative for 2D-FLFs are first derived. Then, by these matrices, a system of algebraic equations is obtained from FPDEs. Hence, by solving this system, the unknown 2D-FLFs coefficients can be computed. Three examples are discussed to demonstrate the validity and applicability of the proposed method.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

KOU, W., and G. SJÖGREN. "Fracture behaviour of zirconia FPDs substructures." Journal of Oral Rehabilitation 37, no. 4 (April 2010): 292–99. http://dx.doi.org/10.1111/j.1365-2842.2009.02057.x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Bando, Yuki. "Current concept of cantilever bridge FPDs." Annals of Japan Prosthodontic Society 15, no. 1 (2023): 43–49. http://dx.doi.org/10.2186/ajps.15.43.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Vafaee, Fariborz, Amirarsalan Hooshyarfard, Armaghan Shahbazi, Farnoush Fotovat, Masoumeh Khoshhal, and Shamsodin Heydari. "Fracture Resistance of Aged Full-Coverage All-Ceramic Zirconia and Metal-Ceramic Restorations of Implant-Supported Fixed Partial Dentures." Open Access Macedonian Journal of Medical Sciences 8, no. D (October 4, 2020): 198–202. http://dx.doi.org/10.3889/oamjms.2020.4919.

Повний текст джерела

Анотація:

BACKGROUND: Metal-ceramics restorations were considered a preferable option for fabrication fixed partial dentures (FPDs) that have an acceptable durability, but they are not able to provide the same beauty as the entire ceramic material. Full-contour zirconia, such as Zolid, does not have problems with chipping of layered zirconia, along with translucency and staining capabilities. AIM: This study aimed to assess the fatigue fracture strength of three-unit implant-supported full-contour zirconia and metal-ceramics posterior FPDs. MATERIALS AND METHODS: In this in vitro study, 24 posterior three-unit implant-supported FPDs were fabricated of full-contour zirconia and metal-ceramics and were cemented on implant abutments. To simulate the oral environment, FPDs were subjected to 10,000 thermal cycles between 5 and 55°C for 30 s and were then transferred to a chewing simulator (100,000 cycles, 50 N, 0.5 Hz). Afterward, fatigue fracture strength was measured using a universal testing machine. Data were analyzed using an independent sample t-test. RESULTS: The obtained results showed that the mean and standard deviation of fatigue fracture strength was higher for the metal-ceramics group (2567.8 ± 689.7 N) compared to those for the full-coverage zirconia group (2108.6 ± 455.2 N). However, the difference was not statistically significant (p ˃ 0.05). CONCLUSIONS: Fracture resistance due to fatigue in the metal-ceramics group was not significantly different from full-coverage zirconia group. Full-coverage zirconia seems promising as a metal-ceramics material for the fabrication of posterior three-unit FPDs.

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Strasser, Thomas, Alois Schmid, Christina Huber, and Martin Rosentritt. "4-Unit Molar Fixed Partial Dentures Made from Highly Translucent and Multilayer Zirconia Materials: An In Vitro Investigation." Ceramics 5, no. 1 (February 8, 2022): 99–107. http://dx.doi.org/10.3390/ceramics5010009.

Повний текст джерела

Анотація:

Background: Modern zirconia blanks for the fabrication of dental CAD/CAM restorations provide a layer structure with color and strength transitions. Variation in the yttria content has a particular effect on the characteristics of the materials. The properties of dental restorations may vary depending on the milling position within the blank. Especially for wide-span fixed partial dentures (FPDs), relevant effects on clinical performance might result. This study investigated if the application of high-translucent zirconia and positioning within multilayer zirconia blanks affect the in vitro performance of 4-unit FPDs. Methods: 4-unit FPDs were fabricated from monolayer 3Y-TZP-A, 3Y-TZP, 4Y-TZP, 5Y-TZP, 4Y/5Y-TZP, and different positions within multilayer zirconia blanks (3Y-TZP/5Y-TZP). The FPDs were adhesively luted to resin abutment teeth, divided into groups (n = 8 each): “baseline” (24 h water-storage)/“TCML” (chewing simulation by means of thermalcycling and mechanical loading), and loaded to fracture. The statistics included mean and standard deviation, one-way ANOVA, Bonferroni post hoc test, and Pearson correlation (α = 0.05). Results: The mean fracture force values varied between 803.8 ± 171.7 N (5Y) and 1474.1 ± 193.0 N (3Y) (baseline) and 713.5 ± 190.9 N (5Y) and 1337.4 ± 205.6 N (3Y) (TCML). Significantly different (p = 0.000) results between the groups and individual significant differences (p ≤ 0.039) were found. Conclusions: Positioning within multilayer blanks affected the fracture force only slightly. Multilayer, 3Y-TZP-A, 3Y-TZP, and 4Y-TZP seem appropriate for the clinical application with 4-unit molar FPDs. Application of 5Y-TZP is critical.

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Walls, Angus W. G. "Cantilever FPDs Have Lower Success Rates Than End Abutted FPDs After 10-Years of Follow-up." Journal of Evidence Based Dental Practice 10, no. 1 (March 2010): 41–43. http://dx.doi.org/10.1016/j.jebdp.2009.11.020.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

Seok, Seonho, HyungDal Park, Yong-Jun Kim, and Jinseok Kim. "Mechanical Characterization and Analysis of Different-Type Polyimide Feedthroughs Based on Tensile Test and FEM Simulation for an Implantable Package." Micromachines 13, no. 8 (August 11, 2022): 1295. http://dx.doi.org/10.3390/mi13081295.

Повний текст джерела

Анотація:

This paper presents the mechanical behaviors of different types of polyimide feedthroughs that are frequently used for implantable polymer encapsulation. Implantable packages of electronic devices often comprise circuits mounted on printed circuit boards (PCBs) encapsulated in a biocompatible polymer material, with input/output feedthroughs for electrical interconnections. The feedthroughs are regarded as essential elements of the reliability of the package since they create inevitable interfaces with the encapsulation materials. Flexible materials are frequently used for feedthroughs owing to their ease of manufacturing; thus, their mechanical properties are crucial as they directly interact with parts of the human body, such as the brain and neurons. For this purpose, tensile tests were performed to characterize the mechanical properties of flexible PCBs (FPCBs) and photosensitive polyimides (PSPIs). Commercial FPCBs and homemade PSPIs of two different thicknesses were subjected to tensile tests for mechanical characterization. The FPCBs showed typical stress–strain curves, while the PSPIs showed brittleness or strain hardening depending on the thickness. The material properties extracted from the tensile tests were used for explicit modeling using the finite element method (FEM) and simulations to assess mechanical behaviors, such as necking and strain hardening.

Стилі APA, Harvard, Vancouver, ISO та ін.

37

MANDAL, HEMANTA, and B. BIRA. "EXACT SOLUTION AND CONSERVATION LAWS OF FRACTIONAL COUPLED WAVE INTERACTION EQUATION." Fractals 27, no. 02 (March 2019): 1950019. http://dx.doi.org/10.1142/s0218348x19500191.

Повний текст джерела

Анотація:

In this paper, we consider a time-fractional coupled KdV equations describing the interaction of equatorial and midlatitude Rossby waves. From the application of Lie group analysis, the governing system of fractional partial differential equations (FPDEs) is reduced to a system of fractional ordinary differential equations (FODEs). Further, we construct the group-invariant solution as well as the power series solution for the given coupled equations. Next, the evolutionary behavior of the waves under the influence of the fractional order derivative [Formula: see text] is studied graphically through the group-invariant solution. Finally, the conservation laws for the given system of FPDEs are obtained.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Ahmad, Muhammad Zaini, Ibtisam Kamil Hanan, and Fadhel Subhi Fadhel. "Stability of fractional order parabolic partial differential equations using discretised backstepping method." Malaysian Journal of Fundamental and Applied Sciences 13, no. 4 (December 26, 2017): 612–18. http://dx.doi.org/10.11113/mjfas.v0n0.725.

Повний текст джерела

Анотація:

This paper focuses on the application of backstepping control scheme for fractional order partial differential equations (FPDEs) of order with . Therefore to obtain highly accurate approximations for this derivative is of great importance. Here the discretised approach for the space variable is used to transform the FPDEs into a system of differential equations. These approximations arise mainly from the Caputo definition and the Grünwald-Letnikov definition. A Lyapunov function is defined at each stage and the negativity of an overall Lyapunov function is ensured by proper selection of the control law. Illustrative example is given to demonstrate the effectiveness of the proposed control scheme.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Debbi, Latifa. "Explicit solutions of some fractional partial differential equations via stable subordinators." Journal of Applied Mathematics and Stochastic Analysis 2006 (February 26, 2006): 1–18. http://dx.doi.org/10.1155/jamsa/2006/93502.

Повний текст джерела

Анотація:

The aim of this work is to represent the solutions of one-dimensional fractional partial differential equations (FPDEs) of order (α∈ℝ+\ℕ) in both quasi-probabilistic and probabilistic ways. The canonical processes used are generalizations of stable Lévy processes. The fundamental solutions of the fractional equations are given as functionals of stable subordinators. The functions used generalize the functions given by the Airy integral of Sirovich (1971). As a consequence of this representation, an explicit form is given to the density of the 3/2-stable law and to the density of escaping island vicinity in vortex medium. Other connected FPDEs are also considered.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Lai, Chuan-Chi, Yu-De Lin, and Chuan-Ming Liu. "Frequent-Pattern-Based Broadcast Scheduling for Conflict Avoidance in Multichannel Data Dissemination Systems." Wireless Communications and Mobile Computing 2021 (December 14, 2021): 1–19. http://dx.doi.org/10.1155/2021/1863590.

Повний текст джерела

Анотація:

With the popularity of mobile devices, using the traditional client-server model to handle a large number of requests is very challenging. Wireless data broadcasting can be used to provide services to many users at the same time, so reducing the average access time has become a popular research topic. For example, some location-based services (LBS) consider using multiple channels to disseminate information to reduce access time. However, data conflicts may occur when multiple channels are used, where multiple data items associated with the request are broadcasted at about the same time. In this article, we consider the channel switching time and identify the data conflict issue in an on-demand multichannel dissemination system. We model the considered problem as a data broadcast with conflict avoidance (DBCA) problem and prove it is NP-complete. We hence propose the frequent-pattern-based broadcast scheduling (FPBS), which provides a new variant of the frequent pattern tree, FP ∗ -tree, to schedule the requested data. Using FPBS, the system can avoid data conflicts when assigning data items to time slots in the channels. In the simulation, we discussed two modes of FPBS: online and offline. The results show that, compared with the existing heuristic methods, FPBS can shorten the average access time by 30%.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

Wang, Shiang-Jung, Yi-Lin Sung, Cho-Yen Yang, Wang-Chuen Lin, and Chung-Han Yu. "Control Performances of Friction Pendulum and Sloped Rolling-Type Bearings Designed with Single Parameters." Applied Sciences 10, no. 20 (October 15, 2020): 7200. http://dx.doi.org/10.3390/app10207200.

Повний текст джерела

Анотація:

Owing to quite different features and hysteretic behavior of friction pendulum bearings (FPBs) and sloped rolling-type bearings (SRBs), their control performances might not be readily compared without some rules. In this study, first, on the premise of retaining the same horizontal acceleration control performance, the effects arising from different sloping angles and damping forces on the horizontal maximum and residual displacement responses of SRBs are numerically examined. For objective comparison of passive control performances of FPBs and SRBs, then, some criteria are considered to design FPBs with the same horizontal acceleration control performance by referring to the designed damping force and the maximum horizontal displacement response of SRBs under a given seismic demand. Based on the considered criteria, the passive control performances of FPBs and SRBs under a large number of far-field and pulse-like near-fault ground motions are quantitatively compared. The numerical comparison results indicate that the FPB models might potentially have better horizontal acceleration and isolation displacement control performances than the SRB models regardless of whether they are subjected to far-field or near-fault ground motions, while the opposite tendency is observed for their self-centering performances, especially when the SRB model designed with a larger sloping angle or a smaller damping force.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Karbalaie, Abdolamir, Hamed Hamid Muhammed, and Bjorn-Erik Erlandsson. "Using Homo-Separation of Variables for Solving Systems of Nonlinear Fractional Partial Differential Equations." International Journal of Mathematics and Mathematical Sciences 2013 (2013): 1–8. http://dx.doi.org/10.1155/2013/421378.

Повний текст джерела

Анотація:

A new method proposed and coined by the authors as the homo-separation of variables method is utilized to solve systems of linear and nonlinear fractional partial differential equations (FPDEs). The new method is a combination of two well-established mathematical methods, namely, the homotopy perturbation method (HPM) and the separation of variables method. When compared to existing analytical and numerical methods, the method resulting from our approach shows that it is capable of simplifying the target problem at hand and reducing the computational load that is required to solve it, considerably. The efficiency and usefulness of this new general-purpose method is verified by several examples, where different systems of linear and nonlinear FPDEs are solved.

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Rafique, Aamir, Saira Khalid, Asif Ali Shah, Naureen Sarwar, Muhammad Azeem, and Hammad Hassan. "Comparitive Evaluation of Inlay Retained and Surface Retained Resin Bonded Fixed Partial Dentures." Pakistan Journal of Medical and Health Sciences 15, no. 12 (December 30, 2021): 3601–7. http://dx.doi.org/10.53350/pjmhs2115123601.

Повний текст джерела

Анотація:

Objective: The objective of the study was to evaluate and compare the clinical success rate of inlay and surface retained RB-FPDs fabricated with fiber reinforced composite. Material and Methods: This study was performed in Prosthodontic department de`Montmorency college of dentistry. 172 RB-FPDs were completed with two preparation designs having 86 cases in each design (inlay retained and surface retained). Restorations were done on patients for single missing molar surrounded by sound, healthy and well aligned abutments. RB-FPDs were fabricated in zirconium silicate based indirect composite (ceramage) with incorporation of glass fibers (Everstick C&B). Follow up was done after every six months till 18 months. Complications (fracture, debonding, and dislodgment or abutment tooth caries) developed during follow up were recorded and analyzed through SPSS version 17. Results: Overall success rate of 76.9% was observed in both designs of RB-FPDs. P value of 0.190 showed insignificant statistical differences in success rate of two designs however there was a trend towards better performance of inlay retained RBFPDs. Fracture of the framework was most prevalent mode of failure followed by debonding of the restoration. Conclusion: The fiber reinforced RB-FPD is a viable treatment option for replacement of single missing posterior tooth. Keywords: Maryland Bridge, Resin bonded bridges, Resin bonded fixed partial dentures (RBFPDs), Minimum preparation bridges

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Aminah, Siti, Jamil Suprihatiningrum, and Astri Hanjarwati. "PRODADISA “Program Pemberdayaan Difabel Daksa” menuju Percontohan BKD (Balai Kerja Difabel) untuk Meningkatkan Kemandirian dan Life Skill Difabel." INKLUSI 2, no. 2 (December 1, 2015): 299. http://dx.doi.org/10.14421/ijds.2209.

Повний текст джерела

Анотація:

Jumlah difabel daksa di kabupaten Bantul termasuk dalam kategori tinggi dibandingkan daerah lain, terutama pascagempa tahun 2006. Meskipun pemerintah telah memperhatikan keberlanjutan hidup yang layak bagi difabel, namun sampai saat ini, program pemberdayaan yang dilakukan pemerintah belum memberikan dampak yang signifikan bagi kemandirian dan life skills bagi para difabel daksa. Salah satu lembaga difabel yang berperan dalam program pemberdayaan ini adalah Paguyuban Bangkit Bersama (PBB). Forum ini merupakan wadah dari perwakilan DPO seluruh (17) kecamatan di Kabupaten Bantul. FPDB sudah memiliki berbagai macam kegiatan pemberdayaan, diantaranya pembuatan dan reparasi sepatu roda, kerajinan anyaman bambu, dan pembuatan meja kursi untuk cafe. Sayangnya, FPDB belum memiliki manajemen SDM yang bagus dan tertata rapi, di samping hasil produk dari program pemberdayaan yang sebenarnya sudah layak jual, namun proses pemasaran yang kurang dapat menarik pasar. Oleh karenaitu, melalui Kegiatan Pengabdian kepada Masyarakat ini akan diusulkan PRODADISA (Program Pemberdayaan Difabel Daksa) yang meliputi kegiatan assessment, kelanjutan program yang diselenggarakan PBB, dan evaluasi program pemberdayaan difabel yang selama ini telah dilakukan oleh PBB bersama pemda kabupaten Bantul. Tujuan PRODADISA adalah untuk: meningkatkan kemampuan difabel daksa anggota PBB dalam hal manajemen SDM; membentuk masyarakat difabel yang mandiri dalam berwirausaha; memberikan pelatihan teknologi informasi kepada anggota FPDB dalam mendukung usahanya; memberikan pelatihan menjahit dan pengembangan produk jahit yang marketable. Tujuan akhir dari kegiatan ini adalah FPDB menjadi percontohan Balai Kerja Difabel (BKD), sehingga sustainability kegiatan dapat terus terjaga.

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Fan, Cheng, and Li Chi Han. "Numerical Modeling of the Fracture Process of a Three-Unit All-Ceramic Fixed Partial Denture." Advanced Materials Research 97-101 (March 2010): 1569–72. http://dx.doi.org/10.4028/www.scientific.net/amr.97-101.1569.

Повний текст джерела

Анотація:

Fracture of dental all-ceramic restoration is often observed in clinic. And the fracture mechanisms and processes of three-unit all-ceramic fixed partial dentures (FPDs) are still not clear. In this paper, the fracture mechanism and process of a three unit zirconia ceramic FPDs framework under simulated mechanical loading are calculated by using a self-developed numerical modeling code, the RFPA2D code. Acoustic emission showed that the fracture mechanism was tensile failure and the crack started at the lower boundary of the framework. The result revealed that the framework fracture pattern obtained by using the numerical simulation agreed with that observed in a previous laboratory test. The fracture process could be followed both in step-by-step and step-in-step. The RFPA2D code is suitable for the use as a complement to other tests and clinical observations in studying stress distribution, fracture mechanism and fracture process in ceramic FPDs framework.

Стилі APA, Harvard, Vancouver, ISO та ін.

46

Concezzi, Moreno, and Renato Spigler. "An ADI Method for the Numerical Solution of 3D Fractional Reaction-Diffusion Equations." Fractal and Fractional 4, no. 4 (December 14, 2020): 57. http://dx.doi.org/10.3390/fractalfract4040057.

Повний текст джерела

Анотація:

A numerical method for solving fractional partial differential equations (fPDEs) of the diffusion and reaction–diffusion type, subject to Dirichlet boundary data, in three dimensions is developed. Such fPDEs may describe fluid flows through porous media better than classical diffusion equations. This is a new, fractional version of the Alternating Direction Implicit (ADI) method, where the source term is balanced, in that its effect is split in the three space directions, and it may be relevant, especially in the case of anisotropy. The method is unconditionally stable, second-order in space, and third-order in time. A strategy is devised in order to improve its speed of convergence by means of an extrapolation method that is coupled to the PageRank algorithm. Some numerical examples are given.

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Im, James S., and Anne Chiang. "Materials for Flat-Panel Displays." MRS Bulletin 21, no. 3 (March 1996): 27–29. http://dx.doi.org/10.1557/s0883769400036095.

Повний текст джерела

Анотація:

Flat-panel displays (FPDs) will soon become ubiquitous products in our homes, workplaces, and a number of places in between. Familiar display applications pioneered by the venerable cathode-ray tube (CRT) will progressively utilize a number of different FPDs. Flat-panel displays will also initiate and pioneer new applications, as was the case with notebook computers and personal digital assistants.The future proliferation of FPDs can no longer be doubted for two simple reasons. First, such devices help us cope with this already information-saturated society. Second, the technological momentum and financial commitment needed for FPDs to take hold are already irreversibly set in place. It is the insatiable current and near-future demand that are pulling the field, and that are fueling a flurry of research and development activities. The display market has grown in size from tens of millions of dollars only a decade ago to a nearly ten-billion-dollar industry. This market growth is expected to continue at a brisk pace during the next decade.This of course is in no way bad news for materials scientists and engineers. We nearly always benefit from development of new and complex products. It is in regard to these rather incipient but advanced manufacturing technologies where we often encounter challenging, relevant, and interesting materials problems. The better we address these obstacles during these early and therefore critical times, the more successful the FPD technology will be in fulfilling the potential opportunities that lie ahead.

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Al Deeb, Laila, Khold Al Ahdal, Ghaith Alotaibi, Abdullah Alshehri, Bader Alotaibi, Faris Alabdulwahab, Modhi Al Deeb, Yasser F. AlFawaz, Fahim Vohra, and Tariq Abduljabbar. "Marginal Integrity, Internal Adaptation and Compressive Strength of 3D Printed, Computer Aided Design and Computer Aided Manufacture and Conventional Interim Fixed Partial Dentures." Journal of Biomaterials and Tissue Engineering 9, no. 12 (December 1, 2019): 1745–50. http://dx.doi.org/10.1166/jbt.2019.2196.

Повний текст джерела

Анотація:

The aim was to investigate the marginal fit, internal adaptation and compressive strength of SLA provisionals (SLA) in comparison to CAD-CAM and conventional (CONV) interim fixed partial dentures (FPDs). Thirty interim FPDs were fabricated using CAD-CAM technology (CAD-CAM blocks Ceramill TEMP, PMMA), conventional molding technique (CONV) (TrimPlus, PMMA) and Stereolithography (SLA) method (Form 2, Formlabs, PMMA) (n = 10). Internal adaptation (occlusal, coronal, middle and cervical) and marginal integrity (inner and outer edge) was assessed using micro-computerized tomography (Micro-CT). The failure and compressive strength was assessed by application of a static load at a crosshead speed of 1 mm/min until fracture. Data was analysed using ANOVA and multiple comparisons test. The maximum and minimum marginal mis-fit was for CONV (283.3± 98.6 nm) and CAD-CAM (68.2± 18.1 m) groups. CAD-CAM (68.2± 18.1 m) and SLA (84.7± 27.5 m) provisionals showed comparable marginal mis-fit (p > 0.05). The mean failure load was significantly higher (p < 0.05) in CAD-CAM (687.86± 46.72 N), compared to SLA (534.8± 46.1 N) and CONV (492.7± 61.8 N) samples. Compressive strength for CAD-CAM (2.44± 0.27 MPa) samples was significantly higher (p < 0.05) than SLA (1.80± 0.15 MPa) and CONV (1.65± 0.20 MPa) groups. Marginal fit and internal adaptation of SLA printed FPDs was comparable to CAD-CAM interims. Compressive strength of the SLA interims FPDs can withstand intra-oral loads.

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Eser, A., H. Renan, L. Chao, B. Jiang, and S. Heintze. "Simulation of development of internal stresses within zirconia FPD's." Dental Materials 33 (2017): e28. http://dx.doi.org/10.1016/j.dental.2017.08.055.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Firman, Edi, and Fathurrahman Imran. "THE EFFECTIVENESS OF MIND-MAPPING TOWARDS STUDENTS' WRITING SKILL." Jo-ELT (Journal of English Language Teaching) Fakultas Pendidikan Bahasa & Seni Prodi Pendidikan Bahasa Inggris IKIP 4, no. 1 (February 28, 2020): 10. http://dx.doi.org/10.33394/jo-elt.v4i1.2437.

Повний текст джерела

Анотація:

This research was intended to analyze the effect of mind mapping towards students writing skill at the second semester students of FPBS IKIP Mataram in academic year 2015/2016. This study was quasi experimental research, where the sample was cluster randomly selected with the total number of sample was 65 students which were divided into 2 classes; 29 students were in the control group and there were 36 students belong to experimental group. In order to collect the research data, the writer used writing test to comprehend the students’ ability in managing text based on mind mapping concept. After the data was obtained, then it was analyzed by applying descriptive statistical analysis and inferential analysis. Regarding to the data analysis it was found that the students’ ability before treatment was 69.72 in the significant level 95%. On post-test data analysis, the students mean writing ability increased into 77.22. The inferential analysis or hypothesis testing also proved that the t-test was higher than t-table in the significant level 95% (α =0.05) and degree of freedom 63 (4.158 > 2.000) with ρ value (sig.) 0.00 < 0.05. It was clearly claimed that the alternative hypothesis (Ha) which stated that mind-mapping was effective towards students writing at second semester students of FPBS IKIP Mataram in academic year 2015/2016 was accepted and the null hypothesis (Ho) that said main-mapping is not effective toward students writing at second semester students of FPBS IKIP Mataram in academic year 2015/2016 was rejected. Those data evidently proved that mind mapping was effective towards students writing especially at second semester students of FPBS IKIP Mataram in academic year 2015/2016.

Стилі APA, Harvard, Vancouver, ISO та ін.

Статті в журналах з теми "FpDBS"

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями