Дисертації з теми "Forming and distribution of losses"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Forming and distribution of losses".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Ozel, Kerem. "Losses In Electric Distribution System." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/2/12607916/index.pdf.
Повний текст джерелаBergensund, Andreas, Pontus Eriksson, and Oskar Häger. "District heating in Lyckebo : Investigation of distribution losses." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-253800.
Повний текст джерелаHughes, Roxana Bejarano. "Distribution of a Novel Gram Negative, Capsule-Forming Bacterium." Thesis, University of North Texas, 1997. https://digital.library.unt.edu/ark:/67531/metadc500729/.
Повний текст джерелаCALILI, RODRIGO FLORA. "SYSTEM DEVELOPMENT TO DETECT COMMERCIAL LOSSES IN ELECTRICAL ENERGY DISTRIBUTION NETWORK." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2005. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=7629@1.
Повний текст джерелаOs modelos matemáticos comumente usados na identificação de irregularidades na medição se baseiam na análise da redução percentual do consumo do mês (normalmente de 20% a 30%) em relação aos meses anteriores. Este método tem gerado resultados imprecisos uma vez que considera o valor do consumo como um valor rígido e, portanto, não incorpora o efeito da sazonalidade na tipologia das cargas das unidades consumidoras. Este trabalho tem o intuito de melhorar a identificação de clientes fraudulentos utilizando métodos de inteligência artificial, tais como Redes Neurais e Lógica Fuzzy, implementados a um banco de dados de cadastro da Distribuidora de Energia ELEKTRO e a uma Pesquisa de Posses e Hábitos de Consumo (PPH) feita nesta mesma empresa. Nesta dissertação, o objetivo foi classificar um grupo de consumidores como normal (adimplente), inadimplente e fraudulento. Para tanto, foi feita inicialmente uma clusterização utilizando uma Rede Neural, mais especificamente uma Rede de Kohonen, para o banco de dados de cadastro disponibilizado pela distribuidora. Tomando os grupos desta classificação prévia feita pela Rede identificaram-se quais e quantos destes tiveram PPH´s realizadas. Para se ter a classificação de um grupo quanto a incidência de consumidores normais, inadimplentes e fraudulentos utilizou-se um processo de Análise Fuzzy, o qual identifica os clusters com os consumidores de cada um dos segmentos. É feita uma análise de desempenho do modelo proposto com dados reais fornecidos pela empresa, na qual os resultados apontaram para uma robustez do método.
Mathematical models commonly used to identify irregularities in measurement are based on percentile reduction analysis of the monthly consumption (normally from 20% to 30%) in relation to the previous months. This method tends to generate imprecise results, since it considers the value of the consumption as a rigid value and, therefore, it does not incorporate the seasonal effect in the loads topology of the consumer units. This work has intention to improve the identification of fraudulent customers using artificial intelligence methods, such as Neural Networks and Fuzzy Logic, implemented to a database of consumers of ELEKTRO a distributing utility of São Paulo State, Brazil. It also uses information on appliances ownership obtained via market research in ELEKTRO area, named PPH (Portuguese for this particular type of market research). In this dissertation, the main objective was to classify a group of consumers as solvent, insolvent and fraudulent. In order to achieve this task, a clustering was initially made using a Neural Network framework, more specifically a Kohonen Network, for the database available. It was then checked which of the groups had a minimum number of clients interviewed in the PPH. In order to have the classification of the clients in the three categories it was used Fuzzy Analysis. Selected data is also presented, considering the available database of the Company as well as the research environment, which had been taken from the PPH. Finally, it was checked the performance of the method against real data obtained from the utility and the results were very satisfactory.
He, Wei. "Three essays on the risk and distribution of a portfolio's future losses." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2001. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp05/NQ63706.pdf.
Повний текст джерелаWilliams, Kevin Vaughan Carleton University Dissertation Engineering Mechanical. "The numerical prediction of strain distribution in sheet metal forming operations." Ottawa, 1993.
Знайти повний текст джерелаBournival, Pierre. "Head losses and water distribution in a sandy loam soil with a subirrigation system." Thesis, McGill University, 1988. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=64034.
Повний текст джерелаMa, Chenije [Verfasser]. "A novel evaluation framework for energy losses in low voltage distribution grids / Chenije Ma." Kassel : kassel university press c/o Universität Kassel - Universitätsbibliothek, 2020. http://d-nb.info/1228829284/34.
Повний текст джерелаStrandet, M. L., A. Weiss, J. D. Vieira, Breuck C. de, J. E. Aguirre, M. Aravena, M. L. N. Ashby, et al. "THE REDSHIFT DISTRIBUTION OF DUSTY STAR-FORMING GALAXIES FROM THE SPT SURVEY." IOP PUBLISHING LTD, 2016. http://hdl.handle.net/10150/621235.
Повний текст джерелаJeganathan, Selva. "Improving the Distribution and Retention of Drug Released From In Situ Forming Implants." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1582297937287646.
Повний текст джерелаWallis, Kirsty K. "Investigating the ecology, diversity and distribution of cord-forming fungi in Great Britain." Thesis, University of Oxford, 2014. http://ora.ox.ac.uk/objects/uuid:d7de00b0-74fa-473b-ac6a-c3ae61f6ac27.
Повний текст джерелаHood, L. L., N. C. Richmond, E. Pierazzo, and P. Rochette. "Distribution of crustal magnetic fields on Mars: Shock effects of basin-forming impacts." AMER GEOPHYSICAL UNION, 2003. http://hdl.handle.net/10150/623390.
Повний текст джерелаHan, Xue. "Quantitative Analysis of Distributed Energy Resources in Future Distribution Networks." Thesis, KTH, Industriella informations- och styrsystem, 2012. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-98484.
Повний текст джерелаTrevizan, Rodrigo Daniel. "Detecção e identificação de perdas comerciais em sistemas de distribuição : metodologia baseada em floresta de caminhos ótimos." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/118824.
Повний текст джерелаThe Brazilian electric power system has about 15% of losses. About a half of this amount is due to the so called commercial losses. The commercial losses are the sum of the unbilled energy less the technical losses. The commercial losses are mainly caused by electricity theft, frauds in electricity meters and electricity meter failure. The financial costs caused by these losses are included in the electricity bill, paid by the regular consumers. New regulations approved by the Brazilian regulatory agency for the electric system create a limit for this, which stimulates the investments in commercial loss mitigation by distribution companies. Among the methods used to mitigate commercial losses, those based on pattern recognition of irregular consumers within electric companies’ clients’ databases are some of the most promising. In this work, a system for commercial losses mitigation based on the supervised classifier Optimum-Path Forest (OPF) is studied and developed. Categorical data and data normalization are proposed as methods for improving classifier performance. In order to check the system performance, tests are conducted on a database derived from residential consumer data found in the literature, differently from other works which proposed data classification for commercial and industrial consumers only. The results show that using categorical data and normalization may improve OPF performance. Comparing this method with other classifiers confirms OPF’s efficiency but contests some results shown in the literature.
SANCHEZ, VICTOR DANIEL ARMAULIA. "METHOD TO ESTIMATE THE ELECTRIC LOSSES BASED ON THE LOAD PARAMETER ALLOCATION IN MEDIUM VOLTAGE DISTRIBUTION SYSTEMS." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 2015. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=25711@1.
Повний текст джерелаCOORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
PROGRAMA DE EXCELENCIA ACADEMICA
Em sistemas de distribuição de energia elétrica, um dos maiores desafios para as distribuidoras é a estimação das perdas técnicas. De acordo com a bibliografia, as perdas elétricas nas redes de distribuição em diferentes países podem variar aproximadamente de 3 porcento e 25 porcento da energia fornecida à rede, o que pode significar grandes impactos nos custos do sistema. Especificamente no Brasil, a adequada avaliação das perdas elétricas fornece informação importante para que o regulador estabeleça as tarifas de distribuição de energia elétrica. Na literatura há diversos métodos para a estimação das perdas técnicas de energia, mas devido à dificuldade na modelagem dos equipamentos do sistema, assim como a falta de informação da energia consumida pelas cargas, as estimações podem acarretar em grandes erros. Para tratar este problema, esta dissertação propõe um novo método baseado em um modelo de carga polinomial modificado para estimar as perdas elétricas, considerando medições de tensão e potência na subestação e, quando disponíveis, medições de tensão e potência demandadas pelas cargas. A contribuição principal do método proposto é o uso da informação da topologia da rede e a correlação entre a potência consumida pelas cargas e as grandezas medidas na subestação. Para detalhar e analisar o desempenho do método proposto são utilizados três sistemas elétricos. Os resultados das estimações são comparados com os resultados obtidos por outros métodos de referência encontradas na literatura e em aplicações práticas.
In electrical distribution systems, one of the greatest challenges for utilities is the estimation of technical losses. According to the literature, energy losses throughout the world s electric distribution networks may vary from country to country approximately between 3 percent and 25 percent of the electricity provided, which may cause great impacts on the electrical system costs. Specifically in Brazil, the appropriate evaluation of the energy losses provides valuable information for the regulator to establish the energy distribution tariffs. In literature, there are different ways for estimating energy losses, but due to the difficulty for modeling precisely the equipment of the system, as well as the lack of information regarding the energy consumed of each load, the energy losses estimation may lead to huge errors. To deal with this problem, it is proposed a new method based on a modified load model, taking into account the measurements of voltages and power at the substation and, when available, the measurements of voltages and power demanded by loads with meters installed. The main contribution of the proposed method is the use of the network information and the correlation between the power consumed by the loads and the voltage and power supplied by the substation. In order to detail and analyze the performance of the proposed method, three electric systems are used. The results of the estimations given by the proposed method are compared to those obtained with other methods found in literature and in practical applications.
Holmqvist, Claes. "Mechanical modelling of blade forming and drainage of flocculated suspensions." Doctoral thesis, Stockholm, 2005. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-141.
Повний текст джерелаAinah, Priye. "Coordinated active power reduction strategy for voltage rise mitigation in LV distribution network." Thesis, University of Cape Town, 2018. http://hdl.handle.net/11427/28351.
Повний текст джерелаCalance, Marius Alexandru. "Energy Losses Study on District Cooling Pipes : Steady-state Modeling and Simulation." Thesis, Högskolan i Gävle, Avdelningen för bygg- energi- och miljöteknik, 2014. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-18490.
Повний текст джерелаDistribution losses are a very important factor in district energy systems. By optimizing the losses in such a system, both economical and environmental aspects can be fulfilled. Unfortunately, there is few information regarding losses for district cooling systems. This study focuses on losses in district cooling networks by using both R-network and FEM simulation models. A R-network model composed of thermal conductances has been developed through analytical equations and simulations have been performed for validation. Afterwards, an in-progress construction project of a district cooling network from the city of Gävle, Sweden, is analyzed. The assessment consists of 15 pipe diameters in three configurations (two symmetric cases and one asymmetric), at three ground laying depths (0.8, 2 and 4 meters) for a duration of 7 months (April to October). A particular case in which the main distribution pipes from and to the plant are submerged in the city’s river for a distance of 1 km is investigated in order to estimate the temperature increase of the supply water. A maximum cooling loss below 2% of the total delivered energy during the season for any network configuration resulted from the calculation. Finally, the mixed pipes array seems to be a feasible investment both economically and technically but it cannot be used for the entire network spread since a part of the network has been already built with the non-insulated plastic pipes. The R-network model proved to be effective and reliable in the analysis which provides confidence that it can serve as a solid foundation for a calculation tool - primarily for design purposes and also for estimating energy loss.
Shrestha, Pratigya. "Inverter-based Control to Enhance the Resiliency of a Distribution System." Thesis, Virginia Tech, 2019. http://hdl.handle.net/10919/93764.
Повний текст джерелаMaster of Science
With the increase in the renewable energy sources in the present grid, the established methods for the operation of the grid needs to be updated due to the changes that the large amount of renewable energy sources bring to the system. Due to the While the conventional resources in the power system was mainly synchronous generators that had an inherent characteristic for frequency support and regulation due to the inertia this characteristic can be lacking in many of the renewable energy sources that are usually inverter-based. At present, the commonly adapted function for the inverters is to follow the grid which is suitable in case of normal operation of the power system. However, during emergency scenarios when the utility is disconnected and a part of the system has to operate independently the inverters need to be able to regulate both the voltage and frequency on their own. In this project the inverter-based control, termed as the virtual synchronous generator, has been studied such that it mimics the well-established controls for the conventional generators so that the inverter-based renewable resource appears similar to the conventional generator from the point of view of the grid in terms of the electrical quantities. The utilization of this type of control for operation of a part of the feeder with each inverter-based resource controlling its output in a decentralized manner is studied. The controls try to mimic the established controls for conventional synchronous machine and use it for maintain operation of the system with inverters.
Freitas, Luiz Eduardo MagalhÃes de. "Operational risks - an application of the method of distribution of aggregate losses: a study of case in financial institution." Universidade Federal do CearÃ, 2005. http://www.teses.ufc.br/tde_busca/arquivo.php?codArquivo=1830.
Повний текст джерелаThis paper demonstrates the application of stochastic process Aggregate Loss Distribution Approach for measure of operational risk in a financial institution in according with the minimal requirement of Basel New Adequacy Capital Framework. The mesure uses the historical behaviour of specific operational losses wich happened in the period from 2001,jan to 2004, dec, caused by frauds in and out the company. The process involves the probability distributions fit to frequency and severity historic loss data, the adjustment validation through the application statistical tests and the compound of frequency and severity distributions for production of aggregate yearly loss distribution using Monte Carlo simulation. It approaches either a backtest model for result validation and the stress scenarios development for impacts verification in the capital allocation. This paper clarifies the application of Aggregate Loss Distribution Approach to mesure operational risks, with objective features of validation at every process stages as well as its use as a tool of evaluation from the extreme risk efects and focus in risks mitigation actions through the development scenarios for stresstesting.
Esta dissertaÃÃo demonstra a aplicaÃÃo do processo estocÃstico MÃtodo de DistribuiÃÃo de Perdas Agregadas para mensuraÃÃo de riscos operacionais em uma instituiÃÃo financeira, segundo os requisitos mÃnimos do Novo Acordo de Capital da BasilÃia. A mensuraÃÃo tem por objeto o comportamento histÃrico de perdas operacionais especÃficas, ocorridas no perÃodo de jan/2001 a dez/2004 e decorrentes de fraudes de origem interna e externa à empresa. O processo envolve o ajuste de distribuiÃÃes de probabilidade aos dados de perdas histÃricas, freqÃÃncia e severidade, a validaÃÃo do ajuste mediante a aplicaÃÃo de testes estatÃsticos e a composiÃÃo de distribuiÃÃes de freqÃÃncia e severidade para geraÃÃo da distribuiÃÃo das perdas anuais agregadas, atravÃs de simulaÃÃo de Monte Carlo. Aborda, ainda, um modelo de backtest para validaÃÃo dos resultados e o desenvolvimento de cenÃrios de stress para verificaÃÃo de impactos na alocaÃÃo de capital. Evidencia-se, nesse trabalho, a aplicabilidade do MÃtodo de DistribuiÃÃo de Perdas Agregadas na mensuraÃÃo de riscos operacionais, com caracterÃsticas objetivas de validaÃÃo em todas as etapas do processo, e a sua utilizaÃÃo como instrumento de avaliaÃÃo dos efeitos de riscos extremos e de direcionamento de aÃÃes mitigadoras de riscos â atravÃs do desenvolvimento de cenÃrios para teste de stress.
Andersson, Oscar. "Influence of primary precipitate shape, size volume fraction and distribution in PM tool steels on galling resistance." Thesis, Karlstads universitet, Institutionen för ingenjörsvetenskap och fysik, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kau:diva-37813.
Повний текст джерелаJensen, Maria Louise Strandet [Verfasser]. "The redshift distribution and dust properties of dustz star-forming galaxies at high redshift / Maria Louise Strandet Jensen." Bonn : Universitäts- und Landesbibliothek Bonn, 2018. http://d-nb.info/1160594287/34.
Повний текст джерелаMéffe, André. "Metodologia para cálculo de perdas técnicas por segmento do sistema de distribuição." Universidade de São Paulo, 2001. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-19032002-131948/.
Повний текст джерелаThis work focuses on the development of a new methodology for calculating technical losses within the different segments of the electric distribution system. In order to evaluate technical losses the electrical system was divided into eight segments: energy meter, customer connections, secondary feeder, distribution transformer, primary feeder, distribution substation, high voltage system and another segment that represents other technical losses. The latter comprises losses in equipment such as capacitors and voltage regulators as well as losses in electric connections, isolators, etc. A computational system was developed and it comprises two modules. The first one is intended to calculate technical losses in specific networks. The calculation is made in a hierarchical manner. If a distribution substation is selected for the calculation, the losses in that substation and the losses in all components downstream are calculated. The technical losses, in terms of energy and demand, are obtained by utilizing network topological data, consumed energy data and typical load curves per customer class and activity type. An energy losses index, calculated as a percentage of the supplied energy, is obtained for each segment by applying this module to the entire utilitys power system or in a representative part of it. These values are transferred to the second module, which has the objective of determining the overall energy balance. Technical and non-technical losses, in terms of energy, in each segment are obtained by utilizing the total amount of energy supplied to the system, energy consumed and energy losses indices per segment. This work shows the results obtained by applying the computational tool to a real distribution system. Such results are compared with the ones obtained by using other methodologies, and the main advan ages of this new methodology are outlined.
Pfunder, Monika. "Genetic variation, spatial distribution, and reproductive biology of pseudoflower-forming rust fungi (Uromyces pisi and relatives) on Euphorbia cyparissias /." [S.l.] : [s.n.], 1999. http://e-collection.ethbib.ethz.ch/show?type=diss&nr=13331.
Повний текст джерелаJones, Mackenzie L., Ryan C. Hickox, Christine S. Black, Kevin N. Hainline, Michael A. DiPompeo, and Andy D. Goulding. "THE INTRINSIC EDDINGTON RATIO DISTRIBUTION OF ACTIVE GALACTIC NUCLEI IN STAR-FORMING GALAXIES FROM THE SLOAN DIGITAL SKY SURVEY." IOP PUBLISHING LTD, 2016. http://hdl.handle.net/10150/621376.
Повний текст джерелаShane, William T. "Persistence of Spore Forming Bacteria on Drinking Water Biofilm and Evaluation of Decontamination Methods." University of Cincinnati / OhioLINK, 2008. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1205164893.
Повний текст джерелаPenin, Carlos Alexandre de Sousa. "Combate, prevenção e otimização das perdas comerciais de energia elétrica." Universidade de São Paulo, 2008. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-14082008-092248/.
Повний текст джерелаThe electric power losses due to thefts and frauds, also called Non technical Losses (NTL), have been priority matter for concessionary companies of electric power distribution, as well as for government regulatory agencies, not only due to rapid growth over the past years but also due to its impact on Brazilian electrical system. There is a wide range of possible types and methods of frauds, causing enormous difficulties to licensed companies. The objective of this work is to study the problem of NTL using a wide approach, analyze the experience of dealerships in Brazil and abroad, discuss the best practices for mitigation of those losses and propose improvements in the combat and prevention processes, and the legal procedures for recovery of incomes, leaning on a careful regulatory context. This study draws attention to Brazil\'s socioeconomic diversity, comparing it to various international examples, and intends to identify the most relevant aspects that must be considered on the theme, discussing procedures and methodologies for the equation of the amount of resources to be applied by distributing companies to achieve the appropriate reduction of NTL. A large part of the commercial losses has its origin in issues of social stamp. The State owes and can establish policies to solve such issues, making possible the access to electric power supply for all consumers. It was not part of this research to discuss if these instruments are enough, but to analyze the issue of the commercial losses thoroughly based in the regulatory policies that push dealerships to reduce NTL objecting reasonable regular consumers\' tariff.
Zavadzkis, Lukas. "Skirstomųjų tinklų galios nuostolių skaičiavimo metodų palyginimas." Master's thesis, Lithuanian Academic Libraries Network (LABT), 2005. http://vddb.library.lt/obj/LT-eLABa-0001:E.02~2005~D_20050614_162126-59320.
Повний текст джерелаDresch, Rodolfo de Freitas Valle. "Análise do efeito da modelagem da carga nas estimativas de perdas elétricas em sistemas de distribuição." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2014. http://hdl.handle.net/10183/103754.
Повний текст джерелаElectrical losses, which in Brazil are around 14.4%, are harmful to the technical and financial performance of electric utilities, especially in a scenario of an imminent energy crisis and high regulation. Mitigation of electrical losses is directly related to its correct estimation. To operate an electric power system, it is of fundamental importance to define the correct model of the system elements. The methodologies for estimating energy losses, for the existing distribution systems, do not take into account possible errors in the correct model of connected loads. Thus, this study aims to examine the influence caused by the use of different load models, in the estimation of electrical losses in distribution systems. This analysis covers the backward-forward sweep load flow methodologies by the sum of current, by the sum of power and Newton-Raphson. The energy loss is calculated by the difference between the energy injected into the system, minus the energy delivered. The case study is performed on the IEEE 13 Node Test Feeder. In the proposed case, calculations of energy losses in the distribution system are performed considering different load models. Therefore, the study has estimated the difference in the calculation of energy loss for each type of load model, for the losses calculated with the original pattern of loads. Another point discussed is the performance of load flow methodologies, related to the change of load models. The results have shown that the change in load models influence the estimation of electrical losses in distribution systems and in the performance of load flows.
Holmqvist, Claes. "Modelling of the pressure distributions in twin-wire blade formers." Licentiate thesis, KTH, Mechanics, 2002. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-1490.
Повний текст джерелаDuring papermaking, the internal structure of the fibrenetwork constituting the paper is to a dominating extentdetermined in the forming zone of the paper machine. Thisthesis is aimed at studying the pressure distribution in bladeforming sections, which is commonly considered to be a keyquantity of the process.
Previous work has provided insight into the physics ofdifferent devices employed in blade forming. However, there hasbeen a lack of models enabling studies of the effects of theinteraction between different components on the pressuredistribution. In the thesis, a model is presented for a genericblade forming section consisting of three blades. The positionsof two of the blades are fix, and in between them is located asuction box. The third blade is applied by a prescribed forceto the opposing wire, in a position facing the suction box. Themodel admits the study of the interaction between the pulsesfrom the different blades in the blade/counterbladeconfiguration, and between the pulses and one-sidedsuction.
The wires are modelled as tensioned and perfectly flexibleEuler-Bernoulli beams of negligible mass. The suspension istreated like an inviscid fluid. Consideration is taken to theinfluence of fibre deposition on the permeability of thefabrics. By assuming the ratio between the length scales in thethickness direction and the machine direction to be small, aquasi one-dimensional model is obtained.
For maximum flexibility, the model domain is divided intomodules. Each module is solved individually using a finitedifference based discretisation. The solutions for thedifferent modules are matched with each other iteratively.
A comparison with published results for a single bladeindicates that the model can be used to obtain qualitativelycorrect predictions of the pressure distribution. New resultsinclude a series of calculations showing the non-trivialinteraction between the pressure pulses when the blades arepositioned successively closer together, the effects of suctionon the pressure pulse generated by a blade applied to theopposing wire, and how blades of modest curvature do notnecessarily stay in contact with the fabric along their fullwidth and the implication of this on the pressure gradient.
Descriptors:fluid mechanics, blade forming, pressuredistribution, suction, interaction, permeable fabric,modules
Bazzi, Ali, and Andreas Angelou. "Simulation of the anisotropic material properties in polymers obtained in thermal forming process." Thesis, Tekniska Högskolan, Högskolan i Jönköping, JTH, Produktutveckling, 2018. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-40792.
Повний текст джерелаLucini, Filipe Rissieri. "Método para identificação de quedas de consumo atípicas em unidades consumidoras de energia elétrica." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2010. http://hdl.handle.net/10183/26533.
Повний текст джерелаThis study aims to enhance the main business of distribution companies regarding to the efforts to avoid non-technical losses, that means, field inspections at the consumer units (CUs). For that, the proposition of an algorithm to identify atypical consumption falls within the universe of PAs billing of an electric facility is made. The proposal is based on the analysis of historical records of consumption, so that the data which are considered atypical can be indicated and the CUs ranked according to their priority for inspections in the field. Combined techniques of demand forecasting and statistics robust are proposed. The validity of the algorithm was verified through a case study in an electric power distribution facility in southern Brazil. Through the case study, it was concluded that the algorithm is able to identify atypical consumption falls, and satisfactorily 89.38% of the cases was identified. At the end of this paper, suggestions for further studies in order to improve the performance of the algorithm are presented.
Blasi, Bronson Richard. "DC microgrids: review and applications." Kansas State University, 2013. http://hdl.handle.net/2097/16823.
Повний текст джерелаDepartment of Architectural Engineering and Construction Science
Fred Hasler
This paper discusses a brief history of electricity, specifically alternating current (AC) and direct current (DC), and how the current standard of AC distribution has been reached. DC power was first produced in 1800, but the shift to AC occurred in the 1880’s with the advent of the transformer. Because the decisions for distribution were made over 100 years ago, it could be time to rethink the standards of power distribution. Compared to traditional AC distribution, DC microgrids are significantly more energy efficient when implemented with distributed generation. Distributed generation, or on-site generation from photovoltaic panels, wind turbines, fuel cells, or microturbines, is more efficient when the power is transmitted by DC. DC generation, paired with the growing DC load profile, increases energy savings by utilizing DC architecture and eliminating wasteful conversions. Energy savings would result from a lower grid strain and more efficient utilization of the utility grid. DC distribution results in a more reliable electrical service due to short transmission distances, high service reliability when paired with on-site generation, and efficient storage. Occupant safety is a perceived concern with DC microgrids due to the lack of knowledge and familiarity in regards to these systems. However, with proper regulation and design standards, building occupants never encounter voltage higher than 24VDC, which is significantly safer than existing 120VAC in the United States. DC Microgrids have several disadvantages such as higher initial cost due, in part, to unfamiliarity of the system as well as a general lack of code recognition and efficiency metric recognition leading to difficult certification and code compliance. Case studies are cited in this paper to demonstrate energy reduction possibilities due to the lack of modeling ability in current energy analysis programs and demonstrated energy savings of approximately 20%. It was concluded that continued advancement in code development will come from pressure to increase energy efficiency. This pressure, paired with the standardization of a 24VDC plug and socket, will cause substantial increases in DC microgrid usage in the next 10 years.
Palo, Paulo Rogério. "Avaliação da eficácia de modelos de simulação hidráulica na obtenção de informações para diagnóstico de perdas de água." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/3/3147/tde-27092010-104217/.
Повний текст джерелаCurrently water losses evaluation in distribution systems, is based on empirical equations using information, grouped and totaled, covering whole area. Thus, becomes necessary to subdivide the area into smaller and smaller fractions, searching for the most critical part. This study presents, the effectiveness evaluation of the hydraulic simulation models, use to obtain the information necessary in elaboration diagnosis of water losses, with a practical methodology for using models for this purpose. Shows a pipe classification in three categories A, B and C, its began possible analyses with pareto graphics and thematic maps. Demonstrates that hydraulic simulation adoption is an effective tool in the study of water loss in supply systems. It will allow companies an operational management improvement, ensuring the sustainability of the business and economics of human, financial, and especially, water resources.
Silva, Cleyton Oliveira da. "Modelagem de rede de distribuição de água com ênfase no controle de perdas." Universidade Federal da Paraíba, 2014. http://tede.biblioteca.ufpb.br:8080/handle/tede/5527.
Повний текст джерелаCoordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
The present study aims dissertative modeling and calibration of a real distribution system water, with emphasis on the identification of water losses. The case study was the supply system of Juatama community in Quixadá, located in the central region of the state of Ceará. The distribution network under study was recently installed and is operating with stability, which enabled the development of a model that successfully describes the real system. The calibration process was carried out through LenhsCalibra application, which uses an optimization algorithm based on the technique of genetic algorithms. The program allowed multivariate calibration, including how to search the demand variables and the roughness of pipes, whose values were adjusted using simulations from the actual flow levels and pressures. The calibrated model system showed satisfactory results, and identify the record of discharges used for cleaning of the network and network points higher than those with demands effectively, are consumed by customers.
O presente estudo dissertativo tem por objetivo a modelagem e calibração de um sistema de distribuição de água real, com ênfase na identificação das perdas de água. O estudo de caso foi o sistema de abastecimento da comunidade de Juatama, em Quixadá, localizada na região central do Estado do Ceará. A rede de distribuição em estudo foi instalada recentemente e vem operando com estabilidade, o que possibilitou o desenvolvimento de um modelo que descreve satisfatoriamente o sistema real. O processo de calibração foi realizado por meio do aplicativo LenhsCalibra, que utiliza um algoritmo de otimização baseado na técnica de algoritmos genéticos. O programa possibilitou a calibração multivariada, incluindo como variáveis de busca a demanda e a rugosidade das tubulações, cujos valores foram ajustados através de simulações a partir dos níveis de vazão e pressões reais. O modelo calibrado do sistema apresentou resultados satisfatórios, além de identificar o registro de descargas utilizadas para limpeza da rede e pontos na rede com demandas superiores às que, efetivamente, são consumidas pelos clientes.
Петровський, Михайло Васильович, Михаил Васильевич Петровский, Mykhailo Vasylovych Petrovskyi та М. О. Сокольнікова. "Формування моделі для розрахунку втрат електроенергії на базі програмного комплексу АСКОЕ". Thesis, Сумський державний університет, 2018. http://essuir.sumdu.edu.ua/handle/123456789/67907.
Повний текст джерелаMužila, Martin. "Náhrada parovodu horkovodem v systému centrálního zásobování teplem teplárny Martinská teplárenská, a.s." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2014. http://www.nusl.cz/ntk/nusl-231255.
Повний текст джерелаІваніцький, Сергій Борисович. "Моделювання режиму роботи розподільної електричної мережі з джерелами розосередженої генерації". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2019. https://ela.kpi.ua/handle/123456789/28482.
Повний текст джерелаThesis consists of an explanatory note and graphical part. Explanatory note made 74 pages of A4, which includes 33 figures, 13 tables and 16 sources of literature. The graphical part contains 3 sheets of A1 technical drawings.The paper is dedicated to the exploring of the effects of distributed generation on the network parameters. The problems of functioning of distributed electric networks with distributed generation sources are also considered. A method has been developed to determine the optimal location for connecting sources of distributed generation to the electrical network and to determine the optimal generation power. Modes electrical network designed software environment in «PowerFactory», using a modified Newton-Raphson method for calculating the steady performance
Dahmen, Volker [Verfasser], George [Akademischer Betreuer] Iliakis, and Jürgen [Akademischer Betreuer] Thomale. "I-125-labeled Triplex-Forming-oligonucleotides : Studies on intracellular distribution, cytotoxicity and on gene expression alterations of target genes / Volker Dahmen. Gutachter: Jürgen Thomale. Betreuer: George Iliakis." Duisburg, 2013. http://d-nb.info/1042899649/34.
Повний текст джерелаVanet, Emmanuelle. "Distribution de l'intelligence et approche hétérarchique des marchés de l'énergie distribués dans les Smart Grids." Thesis, Université Grenoble Alpes (ComUE), 2016. http://www.theses.fr/2016GREAT112/document.
Повний текст джерелаIn close relationship with the European project DREAM, this doctoral thesis focus on operational evolutions in tomorrow’s distribution networks wich will integrate a larger amount of distributed renewable resources. A centralized control of all the entities (from controllable loads to embedded generators) is overall optimal but complex and not so reliable. This study addresses the feasibility of a distributed control, autonomous, self-learning and real time operation of local resources and network’s components. The main concern to explore will be the creation of ad-hoc federations of agents that will flexibly adjust their hierarchy to current needs. These collaborative structures will use different coordination strategies ranging from market-based transactions, to balancing optimization market (ancillary services) and to local control (frequency control and self-healing)
Fiala, Martin. "Elektrické sítě využívající stejnosměrné napětí do 1000 V." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2016. http://www.nusl.cz/ntk/nusl-241980.
Повний текст джерелаGladkikh, Egor. "Optimisation de l'architecture des réseaux de distribution d'énergie électrique." Thesis, Université Grenoble Alpes (ComUE), 2015. http://www.theses.fr/2015GREAT055/document.
Повний текст джерелаTo cope with the changes in the energy landscape, electrical distribution networks are submitted to operational requirements in order to guarantee reliability indices. In the coming years, big investments are planned for the construction of flexible, consistent and effective electrical networks, based on the new architectures, innovative technical solutions and in response to the development of renewable energy. Taking into account the industrial needs of the development of future distribution networks, we propose in this thesis an approach based on the graph theory and combinatorial optimization for the design of new architectures for distribution networks. Our approach is to study the general problem of finding an optimal architecture which respects a set of topological (redundancy) and electrical (maximum current, voltage plan) constraints according to precise optimization criteria: minimization of operating cost (OPEX) and minimization of investment (CAPEX). Thus, the two families of combinatorial problems (and their relaxations) were explored to propose effective resolutions (exact or approximate) of the distribution network planning problem using an adapted formulation. We are particularly interested in 2-connected graphs and the arborescent flow problem with minimum quadratic losses. The comparative results of tests on the network instances (fictional and real) for the proposed methods were presented
Zamboni, Lucca. "Otimização da topologia de circuitos de distribuição de energia elétrica usando algoritmos inspirados no comportamento de formigas." Universidade Presbiteriana Mackenzie, 2007. http://tede.mackenzie.br/jspui/handle/tede/1452.
Повний текст джерелаAnt colonies can be considered a multi-agent system, where each agent (ant) works independently by simple rules. Algorithms based on the behavior of ant colonies have been used to solve optimization problems, because in the search for food ants tend to create the shortest (optimum) path between the nest and the food source. In this work, ant inspired algorithms are used in the optimization of the topology of electric energy distribution networks. The algorithm performance is investigated in function of its parameter values. Experiments in hypothetical and actual distribution systems are performed.
Colônias de formigas podem ser consideradas um sistema multi-agente, em que cada agente (formiga) opera independentemente por regras simples. Algoritmos baseados no comportamento de colônias de formigas têm sido usados para resolver problemas de otimização, pois, na procura por alimento, as formigas tendem a estabelecer a rota mais curta (ótima) entre o formigueiro e a fonte de alimento. Neste trabalho, usam-se algoritmos inspirados em formigas na otimização da topologia de circuitos de distribuição de energia elétrica. O desempenho do algoritmo é investigado em função dos valores dos seus parâmetros. Realizam-se experimentos em sistemas de distribuição hipotéticos e realistas.
Michel, André Bernardes. "Alocação de bancos de capacitores e reguladores de tensão usando otimização por metas considerando geração distribuída." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2015. http://hdl.handle.net/10183/118829.
Повний текст джерелаPower distribution systems (DS) are susceptible to energy loss and voltage drops, mainly because of the way that they are operated and built. One way to minimize system loss and improve the voltage profile of DS is with the use of capacitor banks and voltage regulators (VRs) along the distribution feeders. In this scenario, the optimal placement of these devices becomes crucial. In this paper, a quadratic multi objective goal programming method is proposed to obtain the optimal placement of these devices, where the goals are energy loss (goal 1) and the total investment cost (goal 2). The model is subject to system operation constraints, such as power flow demands, limits of voltages and currents, number of stages of switched capacitors and the tap control of VRs. The increase of distributed generation penetration brings new challenges for control and operation of DS. The proposed methodology considers the effects of these power sources and their impact on optimal allocations of capacitors and VRs. With the aim of solving the optimization problem in commercial programs, a linear power flow is used. The algorithms were developed with Matlab software and the conversion was made to a General Algebraic Modeling System (GAMS) language and solved in the NEOS (Network Enabled Optimization System) platform.
Яценко, Олексій Валерійович. "Оптимізація процесів розподілу енергії в системах з локальними джерелами генерування та акумулювання". Master's thesis, КПІ ім. Ігоря Сікорського, 2020. https://ela.kpi.ua/handle/123456789/40797.
Повний текст джерелаThe master's thesis is devoted to the development of an algorithm according to which the real-time distribution network will be reconfigured, which includes distributed generation sources in order to reduce active power losses. To make decisions on changing the network topology, an adaptive forecasting model has been developed, which at each step of forecasting selects the model that showed the best accuracy and which takes into account the degree of information security according to the electrical load. The method of selecting the optimal network configuration was developed on the basis of the classical problem of selecting break points, but for the real-time control problem, the availability of distributed generation sources was taken into account. Machine learning methods (for the case of sufficient information security) and the method of fuzzy time series (for the case of insufficient information security) were chosen as forecasting models. As a result, it was investigated that the application of the reconfiguration algorithm has a positive effect on reducing power losses in the network and can be used for control personnel of substations. It is expected that the results of the research will significantly contribute to the further development of the task of managing the modes of distribution networks in real time.
Domes, František. "Výpočet ztrát v závislosti na konfiguraci distribuční sítě." Master's thesis, Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií, 2015. http://www.nusl.cz/ntk/nusl-221206.
Повний текст джерелаFaria, Lucas Teles de [UNESP]. "Estimação espaço-temporal das perdas não técnicas no sistema de distribuição de energia elétrica." Universidade Estadual Paulista (UNESP), 2016. http://hdl.handle.net/11449/137834.
Повний текст джерелаApproved for entry into archive by Juliano Benedito Ferreira (julianoferreira@reitoria.unesp.br) on 2016-04-07T19:51:32Z (GMT) No. of bitstreams: 1 faria_lt_dr_ilha.pdf: 4869615 bytes, checksum: 5cea8811bb7d053c5440e3d6fb5d55cd (MD5)
Made available in DSpace on 2016-04-07T19:51:32Z (GMT). No. of bitstreams: 1 faria_lt_dr_ilha.pdf: 4869615 bytes, checksum: 5cea8811bb7d053c5440e3d6fb5d55cd (MD5) Previous issue date: 2016-02-26
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Neste trabalho o espaço geográfico é incorporado ao estudo das perdas não técnicas. Os trabalhos avaliados em perdas comumente não consideram a localização espacial das mesmas de forma explícita. No entanto, o estudo das características do lugar onde elas ocorrem pode trazer informações imprescindíveis para melhor compreensão do problema. O espaço é incorporado via técnicas de análise espacial de dados geográficos. A saber: análise espacial de padrões de pontos e análise espacial de dados agregados por áreas. A localização das perdas é obtida através de dados de inspeções reais georreferenciados obtidos a partir de uma concessionária de energia elétrica. Os atributos socioeconômicos do censo demográfico e da rede de distribuição de energia do lugar onde ocorrem as perdas são considerados via técnicas de regressões espaciais. São elas: modelo aditivo generalizado (GAM) e regressão geograficamente ponderada (GWR). Esses atributos são as variáveis independentes das regressões espaciais e auxiliam na explicação da disposição das perdas no espaço geográfico do município em estudo. Essas regressões são combinadas com as cadeias de Markov para produção de mapas de probabilidades de perdas. Esses mapas indicam as subáreas do município que são mais vulneráveis às perdas em termos probabilísticos. Por meio deles, estima-se a evolução das perdas não técnicas no espaço geográfico do município ao longo do tempo. Os mapas de probabilidade de perdas são uma ferramenta gráfica, de fácil interpretação e que auxiliam no planejamento de uma série de ações de prevenção e combate às perdas. Este estudo foi realizado em um município de porte médio do interior paulista com aproximadamente 81 mil unidades consumidoras, sendo que os resultados das simulações foram comparados com dados reais de inspeções em campo. A taxa de acerto para estimação das áreas vulneráveis às perdas via modelo aditivo generalizado (GAM) e cadeias e Markov foi superior a 80%.
In this work the geographic space is incorporated into the study of non-technical losses. Studies on non-technical losses do not often consider the spatial location of them explicitly. However, the study of the characteristics of the place where they occur can provide essential information to better understanding of the problem. The space is incorporated via spatial analysis techniques of geographical data; to know: spatial analysis of point patterns and spatial analysis of data aggregated by areas. The location of the losses is determined via georeferenced inspections data obtained from an electrical power utility. Socioeconomic attributes of the census and the distribution network of energy of the place where the losses occur are considered using the spatial regressions techniques; namely: generalized additive model (GAM) and geographically weighted regression (GWR). These attributes are the independent variables of spatial regressions and assist in the provision of the explanation of the losses in the geographical space of the city under study. These regressions are combined with Markov chains to produce the loss probability maps. These maps show the city subareas that are more vulnerable to losses in probabilistic terms. Through them, the evolution of non-technical losses in the geographical area of the city over the time is estimated. The loss probability maps are a graphical tool, easy to interpret and to assist in planning a series of actions to prevent and combat to losses. This study was conducted in a medium-sized city of São Paulo with about 81,000 consumer units, and the simulation results were compared with real data obtained in field inspections. The hit rate for the estimation of areas vulnerable to losses via generalized additive model (GAM) and Markov chains surpasses 80%.
Bueno, Edilson Aparecido. "Redução de perdas tecnicas atraves de reconfigurações de redes de distribuição de energia eletrica sob demandas variaveis." [s.n.], 2005. http://repositorio.unicamp.br/jspui/handle/REPOSIP/261734.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Eletrica e de Computação
Made available in DSpace on 2018-08-07T20:13:55Z (GMT). No. of bitstreams: 1 Bueno_EdilsonAparecido_M.pdf: 1593593 bytes, checksum: ff2749c689002cc1c4de48ee0899defc (MD5) Previous issue date: 2005
Resumo: Este trabalho apresenta uma nova visão para o problema de redução das perdas técnicas em sistemas de distribuição de energia elétrica, através de reconfiguração de redes. A principal inovação consiste em abordar o problema com a consideração explícita das variações de demandas, mas impondo-se a restrição de que as configurações devem permanecer fixas ao longo do período de planejamento. Esta característica abre a perspectiva de que a metodologia venha a ser usada na operação diária dos sistemas de distribuição. No entanto, leva a um problema de otimização bem mais complexo do que o caracterizado pela visão tradicional. Formulações para demandas fixas e variáveis são desenvolvidas. Duas metodologias distintas para abordagem do novo problema são elaboradas. A primeira utiliza a metodologia denominada Busca Menor Energia, inspirada na técnica de Abertura Seqüencial de Chaves. A segunda técnica, denominada Árvore de Aproximação, faz uso das idéias de árvore geradora de custo mínimo. Ambas são combinadas com uma busca local, denominada Troca de Ramos Generalizada, baseada na técnica de Troca de Ramos. Explora-se também uma extensão da metodologia Árvore de Aproximação caracterizada por associação com conceitos do método GRASP (Greedy Randomized Adaptive Search Procedure). Estudos de casos ilustram a aplicação das metodologias em redes de cidades brasileiras
Abstract: This work presents a new point of view for the technical losses reduction problem in electric power distribution systems, through network reconfigurations. The main innovation is the explicit consideration of demand variations and the use of a fixed configuration during the planning period. This last characteristic makes the methodology able to be used in the daily operation of distribution systems. However, it leads to an optimization problem more complex than approaches without demand variations. Formulations for fixed and variable demands are created. Two distinct methodologies for the resolution of the new problem are elaborated. The first one uses the Minimum Energy Losses methodology, inspired by the ¿Sequential Switch Opening¿ technique. The last one, called Approximation Tree, is based on algorithms for the minimum spanning tree problem. Both of them are combined with a local search procedure, called Branch Exchange by Energy, based on the ¿Branch Exchange¿ technique. An extension of the Approximation Tree methodology is proposed by using concepts of the well-known GRASP method (Greedy Randomized Adaptive Search Procedure). Case Studies demonstrate the application of the methodologies in Brazilian cities¿ networks
Mestrado
Automação
Doutor em Engenharia Elétrica
Cambraia, Mario Sergio. "Automação da redução de perdas técnicas nos sistemas reticulados de distribuição utilizando redes neurais artificiais em redes inteligentes (smart grid)." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/3/3143/tde-05032018-102829/.
Повний текст джерелаThis work presents the methodology, development and testing of an independent automation system, based on Artificial Neural Networks, to reduce technical losses in reticulated underground distribution networks by means of the optimal control of the capacitor banks present in the network. The proposed methodology includes typical functionalities of Intelligent Networks, including practical solutions for the positioning of current sensors in underground networks, collection of field measurements and transmission to the Distribution Operation Center and real-time control of field equipment (capacitors banks). Therefore, this work consists in the implementation of the solution through a low cost of investment in the mitigation of the control of the power factor in the points of delivery to the consumer, and with this there are improvements in the indicators of quality and reliability taking into account the regulatory and contractual requirements of supply of the distributors. The energy concessionaire AES Eletropaulo had great participation in this research project, providing the necessary data of the Reticulated Underground Distribution Network of the city center of São Paulo. The steps of the proposed methodology and the main aspects of system development are also described, as well as the tests performed to prove the results and validate the system.
Бондар, Р. В., та В. В. Ленько. "Організаційно-технічні заходи зниження витрат електроенергії в розподільних електричних мережах АТ "Чернігівобленерго"". Thesis, Чернігів, 2021. http://ir.stu.cn.ua/123456789/25274.
Повний текст джерелаОб'єкт – електричні мережі 10/0,4 кВ АТ «Чернігівобленерго». Мета – знизити обсяг втрат електричної енергії на її розподіл в мережах АТ «Чернігівобленерго» шляхом впровадження відповідних заходів. У дипломному проекті проведено аналіз електроенергетичного балансу АТ «Чернігівобленерго», наведено проблематику рівня втрат електричної енергії на її розподіл мережами та цільову динаміку втрат відповідно до вимог чинного законодавства в сфері електроенергетики. Здійснено опис наявних засобів безоблікового споживання електричної енергії, та заходи боротьби з ними. Наведено приклади заходів по зниженню втрат електричної енергії на її розподіл мережами. Здійснено розрахунок економічного ефекту від впровадження даних заходів. Розглянуті питання охорони праці під час виконання робіт з боротьби з безобліковим споживанням електричної енергії. РОЗПОДІЛ
The object is 10/0.4 kV networks of JSC "CHERNIHIVOBLENERGO". The purpose is to reduce the amount of electricity losses for its distribution in the networks of JSC "CHERNIGIVOBLENERGO" by implementing appropriate measures. The diploma project analyzes the electricity balance of JSC "CHERNIHIVOBLENERGO", presents the issue of the level of electricity losses for its distribution through networks and the target dynamics of losses in accordance with the requirements of current legislation in the electricity sector. A description of the available means of unaccounted electricity consumption and measures to combat them. Examples of measures to reduce electricity losses for its distribution by networks are given. The calculation of the economic effect of the implementation of these measures. The issues of labor protection during the work on combating unaccounted consumption of electricity are considered.