Добірка наукової літератури з теми "Fonction d'efficacité de collage"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fonction d'efficacité de collage".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Fonction d'efficacité de collage":
Valleray, Alain. "Structure et efficacité de la fonction marketing." Recherche et Applications en Marketing (French Edition) 3, no. 2 (June 1988): 55–76. http://dx.doi.org/10.1177/076737018800300203.
Boisson, Hélène. "Régulation multidimensionnelle d'un monopole polluant et majorité politique aléatoire." Recherches économiques de Louvain 71, no. 3 (2005): 285–313. http://dx.doi.org/10.1017/s0770451800044535.
Mari, Kōmoto. "Repentirs de Klee. La fonction autocritique du collage dans les oeuvres découpées et recomposées." Histoire de l'art 44, no. 1 (1999): 35–47. http://dx.doi.org/10.3406/hista.1999.2842.
Corbière, Marc, Monique Bordeleau, Geneviève Provost, and Céline Mercier. "Obstacles à l’insertion socioprofessionnelle de personnes ayant des problèmes graves de santé mentale : données empiriques et repères théoriques." Santé mentale au Québec 27, no. 1 (February 12, 2007): 194–217. http://dx.doi.org/10.7202/014547ar.
Julien, Germain. "Les facteurs de façonnement et les conditions d'efficacité des styles de gestion des cadres de la fonction publique du Quebec." Canadian Journal of Administrative Sciences / Revue Canadienne des Sciences de l'Administration 8, no. 4 (April 8, 2009): 267–87. http://dx.doi.org/10.1111/j.1936-4490.1991.tb00571.x.
Guillaumont, Patrick, and Sylviane Guillaumont Jeanneney. "Les financements climat entre ubiquité et exiguïté : enjeux politiques de leur définition." Revue d'économie financière N° 151, no. 3 (November 8, 2023): 225–37. http://dx.doi.org/10.3917/ecofi.151.0225.
Taghiyari, Hamid R., Sadegh Maleki, and Vahid Hassani. "EFFECTS OF NANO-SILANE ON THE PHYSICAL AND MECHANICAL PROPERTIES OF ORIENTED STRAND LUMBER (OSL)." BOIS & FORETS DES TROPIQUES 330, no. 330 (July 21, 2017): 49. http://dx.doi.org/10.19182/bft2016.330.a31318.
Eunock, Anato Lognidé Serge, Dako Sidoine Aude Sèdami, and Tohinnou Houeze Charbel Vivien Gérardy. "Performance Technique des Ménages Producteurs d'Anacarde dans la Commune de Bantè au Bénin." European Scientific Journal, ESJ 19, no. 9 (March 31, 2023): 308. http://dx.doi.org/10.19044/esj.2023.v19n9p308.
Kaminska, Anna. "Nouveaux médicaments antiépileptiques dans les épilepsies de l'enfant: intérêts et limites." Epileptic Disorders 3, SP2 (December 2001). http://dx.doi.org/10.1684/j.1950-6945.2001.tb00420.x.
Buysse, Jeroen, Kamel Elouhichi, Bruno Fernagut, Frédéric Gaspart, Olivier Harmignie, Bruno Henry de Frahan, Ludwig Lauwers, Philippe Polomé, and Guido Van Huylenbroeck. "Numéro 19 - février 2004." Regards économiques, October 12, 2018. http://dx.doi.org/10.14428/regardseco.v1i0.16103.
Дисертації з теми "Fonction d'efficacité de collage":
Aguilar, Boris. "Experimental study and numerical modeling of accretion phenomena of snow particles at the origin of the formation of accretions on aeronautical structures or civil engineering." Electronic Thesis or Diss., Toulouse, ISAE, 2024. http://www.theses.fr/2024ESAE0003.
To ensure safe flight under snowy conditions, aircraft manufacturers must demonstrate that each engine and its air inlet system can operate throughout the flight power range of the engine (including idling) in both falling and blowing snow conditions. This study is part of an effort to develop models for snow accretion.To establish the starting framework of this work on the modeling of snow icing, Chapter 1 is dedicated to a literature review organized in three parts. In the first part, the different processes of snow creation in the atmosphere are detailed in order to define the snow that will be studied here. In a second part, a literature review on the modelling of ice crystals icing is conducted and constitutes the starting point of this work from the modeling point of view. Finally, a third part relates the current experimental means to measure the snow conditions and the associated advantages and disadvantages.In the chapter 2 we study drag models adapted to the case of snowflakes for calculating particle trajectories. As mentioned in the state of the art, the classical models developed for non-spherical particles are proving sufficiently accurate for ice crystals. The aim here is twofold. Firstly, to check that the models valid for ice crystals are still valid for snowflakes, which are in fact aggregates of particles, much larger and of complex geometric shape. Secondly, the drag models proposed must be compatible with the type of input data. For example, at the end of a flight test campaign, particles can only be described using 2D images, a far cry from a complete and detailed 3D description of the snowflake. In light of the level of accuracy of the input data used to describe the particle, the aim of this chapter is to propose drag models based on a simple and limited geometric description of snowflakes.The chapter 3 is the equivalent of Chap. 2 for adapting heat and mass transfer models for snowflakes. The melting process of a snowflake transported by a hot air flow is studied. Once again, the requirement is twofold. Firstly, to check whether the models developed for ice crystals can be easily extended to the case of snowflakes. Secondly, to propose models for which the complexity of the input data is compatible with the level of accuracy of the databases. As a reminder, 3D descriptions of snowflakes are scarce and difficult to obtain. In many cases, a single 2D image of the particle from a flight test campaign is available. In this chapter, particular emphasis is placed on describing the particle's bulk density, and in particular its evolution during the melting process. In fact, bulk density can vary widely, from a few kg/m3 for the dry particle to 997 kg/m3 for the water droplet resulting from the melting process.At the end of the Chapters 2 and 3, models were proposed for the trajectory of the flakes and for monitoring the melting process. It is thus possible to estimate the location of the impact and the amount of water carried by the flakes. The next physical step concerns the accretion of snow particles. Experimental data will be used to validate or improve the ice crystal accretion models. To our knowledge, no database dealing with snow accretion under aeronautical conditions has been made available so far in the literature. It is in this concept that, this chapter deals with the design and the realization of such "snow" accretion tests. A first comparison with the numerical simulations of the ONERA icing code IGLOO2D will also be proposed
Birginie, Jean-Marc. "Etude du comportement de l'interface des collages sur bois (pin maritime) en fonction de l'environnement." Grenoble 2 : ANRT, 1988. http://catalogue.bnf.fr/ark:/12148/cb37611937n.
Abbas, Mahmoud. "Mesures diélectriques et thermiques d'adhésifs en fonction de la température en vue de la modélisation à 2,45 GHz du chauffage micro-ondes : applications àl'assemblage par collage." Bordeaux 1, 1995. http://www.theses.fr/1995BOR10592.
Mejia, Romero Sandra Milena. "Évaluation de la mise en œuvre du programme d'éducation inclusive à Bogota (Colombie) : une analyse des pratiques adaptatives des enseignants en fonction de leurs perceptions à l'égard du programme et de leur sentiment d'efficacité personnelle." Master's thesis, Université Laval, 2020. http://hdl.handle.net/20.500.11794/67072.
UNESCO (2017) affirms that inclusive education allows recognizing education for everyone as a fundamentalprinciple that promotes students’ success in school. In order to achieve it, governments must review theireducation systems and focus on adaptive teaching practices. In this context, the inclusive education programin Bogota, Colombia was launched in 2017 aimed to enable students with special needs to learn with otherstudents, taking in consideration their abilities. This study proposes an evaluation of the implementation of thisprogram based on an analysis of teachers' adaptation practices according to their perceptions of the programand their sense of self-efficacy. For the analysis, 124 teachers applying the inclusive education programresponded to questionnaires that provided a portrait of the teaching adaptation practices put in place, theirsense of self-efficacy with respect to the implementation of these practices, and describe their perceptions ofthe program. The results show that participants have positive perceptions of the program, a high sense of selfefficacy in implementing adaptive practices, and frequently apply them in response to student specific needs.Furthermore, the consideration of the contextual variables of the program application, in particular the diversityof the specific needs of the students in the class, the teacher's perception of the program as well as theirsense of self-efficacy, make possible to predict a 57% variance in the frequency of use of adaptive practices.These results show the potential of the program and the aspects that need to be improved in itsimplementation. Additional studies to investigate the extent to which students with special needs benefit fromthe implementation of the program should however be carried out.
Schittly-Médard, Estelle. "Analyse d'une interface adhérente dentine/titane en fonction de différents matériaux d'assemblage." Thesis, Reims, 2016. http://www.theses.fr/2016REIMO201.
The aim of this work was to study a bonding dentin/titanium interface. The objective was to optimize and simplify the steps of the bonding protocol, improve and know well the performance of the adhesive interface. In this work, all interfaces have been tested in vitro by shearing.This study included three parts :The purpose of the first study was to evaluate an assemblage by glass ionomer cement (GIC), the Fuji plus®, applied in combination with self-etch bonding system on dentin. Three combinations "system self-etching / Fuji Plus®" were applied and the results obtained by test showed significant improvements from 9% to 44% higher than the values obtained on control specimens.The second experimental part was designed to test the compatibility between five self-etch bonding systems (SEBS) and two resin luting cements (RLC). Significant differences of bond strength in shear were observed according to both the curing mode of the RLC and the adhesive. The SEBS1 proved totally incompatible with chemical or dual cured RLC. Conversely, two-steps SEBS were compatible with RLC chemical/dual cured RLC. A positive correlation was found between the pH of the SEBS or the tested resins and the shear data.The latest study was devoted to evaluate the effect of the storage condition on flexural strength (σf) and shear bond strength (SBS) of a dentin/titanium interface assembled by four self-etch adhesive resin (SEARC). This study showed that the storage in water for 60 days has negatively affected the bending resistance of certain materials. The dentin/titanium adherence offered by Rely X® and G-Cem® was significantly higher than that of Maxcem® and SmartCem2®
Gadoury, David. "Distributions d'auto-amorçage exactes ponctuelles des courbes ROC et des courbes de coûts." Thèse, 2009. http://hdl.handle.net/1866/7896.