Добірка наукової літератури з теми "Flexion à trois points"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Flexion à trois points".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Flexion à trois points":
Gaillard, F., and M. Romand. "Traitements de surface des aciers inoxydables, mesures d’adhérence à l’aide d’un test de flexion trois points." Matériaux & Techniques 75, no. 3-4 (1987): 141–46. http://dx.doi.org/10.1051/mattech/198775030141.
de Gouvello, F. "Application du test de flexion trois points à l'étude des phénomènes d'adhérence d'un polymère sur un métal." Revue de Métallurgie 84, no. 2 (February 1987): 127–34. http://dx.doi.org/10.1051/metal/198784020127.
Roudet, Francine, and Suzanne Degallaix. "Effet du matage en fatigue par flexion trois points avec cisaillement prépondérant dans un V/E-UD." Comptes Rendus de l'Académie des Sciences - Series IIB - Mechanics-Physics-Astronomy 327, no. 14 (December 1999): 1363–69. http://dx.doi.org/10.1016/s1287-4620(00)87505-5.
Bidaud, Samuel. "Trois langues d’Asie du Sud-Est et leur première grammaire (vietnamien, thaï, cambodgien)." Studies about Languages, no. 39 (November 27, 2021): 56–70. http://dx.doi.org/10.5755/j01.sal.1.39.28665.
Morel, Jean-Claude, Abalo P'kla, and Hervé di Benedetto. "Essai in situ sur blocs de terre comprimée Interprétation en compression ou traction de l'essai de flexion en trois points ?" Revue française de génie civil 7, no. 2 (February 28, 2003): 221–37. http://dx.doi.org/10.3166/rfgc.7.221-237.
Piat, C., and D. Potage. "La fermeture dans la chirurgie de l’hallux valgus." Médecine et Chirurgie du Pied 37, no. 3 (September 2021): 57–65. http://dx.doi.org/10.3166/mcp-2021-0074.
Le Bozec, Yves. "Trois points de suspension…" L Information Grammaticale 103, no. 1 (2004): 3–6. http://dx.doi.org/10.3406/igram.2004.2542.
Canário, Rui, Agnès van Zanten, and Alan Wagner. "Trois points de vue." Revue internationale d'éducation de Sèvres, no. 40 (December 1, 2005): 137–50. http://dx.doi.org/10.4000/ries.1356.
Mercier, Christophe. "Trois si grands petits points." Commentaire Numéro 183, no. 3 (August 29, 2023): 695–97. http://dx.doi.org/10.3917/comm.183.0695.
Derbal, Wassila, Abdellatif Zerizer, Jean Gérard, and Daniel Guibal. "CARACTÉRISATION D’ABOUTAGES À ENTURES MULTIPLES POUR TROIS ESSENCES D’ALGÉRIE." BOIS & FORETS DES TROPIQUES 325, no. 325 (July 17, 2015): 59. http://dx.doi.org/10.19182/bft2015.325.a31273.
Дисертації з теми "Flexion à trois points":
Régal, Xavier. "Caractérisation du comportement en traction du béton sous fortes sollicitations : essais de flexion trois points aux barres de Hopkinson." Thesis, Orléans, 2016. http://www.theses.fr/2016ORLE2003/document.
The concrete is one of the most widely used constructional materials. However, its tensile behavior in dynamic is yet not perfectly known. In order to design concrete structures and predict their collapse in the case of industrial accidents, it is mandatory to know its tensile strength. This property depends on the different solicitations to which the concrete can be exposed. In order to characterize the tensile strength of a R30A7 concrete and its dependence on the strain rate, three points bending tests are performed in static and dynamic cases. For this purpose, the most recent standards are used in the static tests. The dynamic ones are carried out with the split Hopkinson pressure bars. This device allows to perform dynamic tests with both the speed and effort loading measurements. Moreover a high speed camera is used to record these experiments in order to acquire full-field displacement measurements with the help of the digital image correlation. Tools using these fields are created to detect the apparition of the crack in one hand, and to follow the crack propagation in the other hand. All these experimental devices and the use of different models, some of which take in account the sample damage, make it possible to determinate the evolution of the tensile strength depending on the strain rate. This work brings forward the fact that ignoring the material damage increases the tensile strength obtain from the tests
Roudet, Francine. "Comportement en flexion trois points avec cisaillement prépondérant de composites verre-époxyde unidirectionnels : sous chargements monotone et cyclique." Lille 1, 1998. https://pepite-depot.univ-lille.fr/LIBRE/Th_Num/1998/50376-1998-439.pdf.
Croston, Tania. "Etude expérimentale du comportement d'une poutre en béton armé en flexion trois points réparée par matériaux composites (approche probabiliste)." Phd thesis, Paris, ENSAM, 2006. http://pastel.archives-ouvertes.fr/pastel-00002602.
Bacon, Christophe. "Mesure de la ténacité dynamique de matériaux fragiles en flexion trois points à haute température, utilisation des barres de Hopkinson." Bordeaux 1, 1993. http://www.theses.fr/1993BOR10508.
BOUKHAROUBA, TAOUFIK PLUVINAGE G. "ETUDE DU COMPORTEMENT DES FISSURES DE FORME SEMI-ELLIPTIQUES ; APPLICATION AUX PLAQUES EN FLEXION TROIS POINTS ET AUX TUBES SOUS PRESSION INTERNE /." [S.l.] : [s.n.], 1995. ftp://ftp.scd.univ-metz.fr/pub/Theses/1995/Boukharouba.Taoufik.SMZ9516.pdf.
Feusier, Gilles. "Etude des propriétés mécaniques à haute température des cermets Ti(C,N)-Mo-Co par mesures de frottement intérieur et par essais de flexion trois points /." [S.l.] : [s.n.], 1997. http://library.epfl.ch/theses/?nr=1659.
Charpail, Estelle. "Analyse du comportement mécanique des côtes humaines en dynamique." Phd thesis, Paris, ENSAM, 2006. http://pastel.archives-ouvertes.fr/pastel-00002983.
Van, Hecke Elisabeth. "Contribution à l'étude des propriétés texturales des produits alimentaires alvéolés : mise au point de nouveaux capteurs." Compiègne, 1991. http://www.theses.fr/1991COMPD381.
Diet, Stéphane. "Mécanismes de rupture des côtes et critères de tolérance thoracique en choc automobile." Phd thesis, Ecole nationale supérieure d'arts et métiers - ENSAM, 2005. http://pastel.archives-ouvertes.fr/pastel-00568920.
Yang, Zhengtian. "Étude expérimentale de la fissuration hydrique d’un sol argileux." Electronic Thesis or Diss., Université de Lorraine, 2022. http://www.theses.fr/2022LORR0038.
The main objective of this experimental study is to better understand and characterize the shrinkage phenomenon and the cracking behavior of clay during drying, and to better understand the mechanism of crack initiation and propagation in clay under hydric loading. Kaolin K13, which is a pure kaolinite clay, was considered in our study. The research is devoted to two main parts, one related to drying shrinkage and the other to desiccation cracking.Experimental studies on drying shrinkage are conducted to determine the hydraulic properties and mechanical behavior of the studied material during the drying process. For this purpose, the hydric parameters including water content, void index and degree of saturation of small unsaturated clay samples with different suction levels were measured by the Kerdane tests. The test is based on measuring the solid volume by liquid displacement. The shrinkage curve and the water retention curve of the studied material were established after fitting the Fredlund and Van Genuchten formulas from the experimental results. The shrinkage deformation of the soil was studied by controlled desiccation tests using smooth supports. Controlled desiccation, using the salt solution method, allows samples to be subjected to the same desiccation path. Global and local deformations of are obtained by 2D-DIC and 3D-DIC. Finally, the local water content and the local suction of the sample are estimated from the local volume deformation coupled with the water retention curve and the shrinkage curve of our material.The second part of the study is devoted to the initiation and propagation of cracks under controlled desiccation of an initially saturated clay. In order to study the main factors influencing cracking and to compare with free shrinkage, the semi-rough substrate was used in controlled desiccation tests, so that the cracks produced in the different samples were captured by the DIC. The evolution of the cracks was first quantified by morphological and statistical studies of the cracks via Image-J software. The influence of the drying path and sample support on the water cracking behavior were also studied at the global sample scale by the DIC. The increase in mechanical strain within the sample, produced by the limiting effect of the support on shrinkage deformation, is one of the main causes of cracking. The distribution of local strains, the phenomenon of stress concentration (through the development of local strains), are studied and analyzed. Crack initiation occurs in local stress zones where the tensile limit of the soil is exceeded. The crack propagation behavior is due to the tensile stress zone at the crack tip. The cracking mechanism is defined by studying the principal direction of deformation. The observed cracks developed in the horizontal direction of the samples, with little effect of vertical deformation on their occurrence. The mode of failure is mainly mode I. More complex failure modes, mixed with mode I, also exist. The study of the cracking mechanism, especially the cracks caused by traction (mode I) was further investigated by indirect traction tests on clay beams. Beams with different levels of suction were subjected to three-point bending, which caused tensile cracks in their tensioned lower part. The maximum strength and maximum bending at cracking and the local tensile deformation related to cracking are studied, as well as the effect of suction on the strength of unsaturated clays
Книги з теми "Flexion à trois points":
Cotnoir, Karine. Maman, trois p'tits points. Sainte-Julie, Québec: Éditions JKA, 2011.
Lefebvre, Denis. Fred Zeller, des trois flèches aux trois points. Paris: B. Leprince, 2004.
Hoeffel, Daniel. En trois points et quelques autres--: Entretiens avec Michel Stourm. Strasbourg: Nuée bleue, 1999.
n/a. Maman, trois petits points T.01. ED. MESSAGERS DES ETOILES, 2009.
Brazelton, Terry. Points forts II : De trois à six ans. Stock, 2002.
Taxil, Léo. Révélations Complètes Sur la Franc-Maçonnerie, les Frères Trois-Points. Independently Published, 2019.
Bocquet, Fabrice. L'important c'est les trois points: Les coulisses du management d'un club de foot de ligue 1. AMPHORA, 2022.
Breton, Gilles, Jean-Paul Laurens, and David Bel, eds. L’internationalisation différenciée des universités - Points de vue d’acteurs. Editions des archives contemporaines, 2020. http://dx.doi.org/10.17184/eac.9782813003461.
Payne, Russell A., and Kimberly S. Harbaugh. Median Neuropathy—Pronator Teres Syndrome and Anterior Interosseous Neuropathy. Edited by Meghan E. Lark, Nasa Fujihara, and Kevin C. Chung. Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780190617127.003.0003.
Частини книг з теми "Flexion à trois points":
Deligne, Par P. "Le Groupe Fondamental de la Droite Projective Moins Trois Points." In Mathematical Sciences Research Institute Publications, 79–297. New York, NY: Springer US, 1989. http://dx.doi.org/10.1007/978-1-4613-9649-9_3.
"8.2 Summary and Conclusions of the Flexion and Extension Chains." In Trigger Points and Muscle Chains in Osteopathy, edited by Philipp Richter and Eric Hebgen. Stuttgart: Georg Thieme Verlag, 2009. http://dx.doi.org/10.1055/b-0034-87810.
Garro, Olivier. "Etude comparative de la mondialisation de trois universités de rang moyen." In L’internationalisation différenciée des universités - Points de vue d’acteurs, 21–36. Editions des archives contemporaines, 2020. http://dx.doi.org/10.17184/eac.2476.
HYGOUNENC, Emmanuel. "Conception fonctionnelle et logique." In Ingénierie des systèmes, 155–86. ISTE Group, 2023. http://dx.doi.org/10.51926/iste.9108.ch8.
Bosseboeuf, Alain, Pierre Etienne Allain, Fabien Parrain, Serge Jacob, Alexis Poisat, Nathalie Isac, Sylvain Perrot, and Arnaud Walther. "Système de flexion 4 points de puce semiconductrice pour une station sous pointes cryogénique." In Instrumentation et Interdisciplinarité, 307–14. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1206-6-039.
Bosseboeuf, Alain, Pierre Etienne Allain, Fabien Parrain, Serge Jacob, Alexis Poisat, Nathalie Isac, Sylvain Perrot, and Arnaud Walther. "Système de flexion 4 points de puce semiconductrice pour une station sous pointes cryogénique." In Instrumentation et Interdisciplinarité, 307–14. EDP Sciences, 2020. http://dx.doi.org/10.1051/978-2-7598-1206-6.c039.
Racin, Céline, and Pierre-Justin Chantepie. "Les méthodes projectives : de l’indication à la restitution." In Les méthodes projectives : de l’indication à la restitution, 15–23. In Press, 2023. http://dx.doi.org/10.3917/pres.racin.2023.01.0016.
de Becdelièvre, Pauline, Adrien Laurent, and Pierre Lescoat. "L’expérience de la thèse en management." In L’expérience de la thèse en management, 368–89. EMS Editions, 2023. http://dx.doi.org/10.3917/ems.gaill.2023.01.0368.
Sannou, Ramoudane Orou, Idrissou Bako, Ismaïl Moumouni, Mohamed Nasser Baco, and Adewole Olagoke. "Participatory Management of Tropical Dry Forests in Benin." In Practice, Progress, and Proficiency in Sustainability, 213–32. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-0014-9.ch011.
Sannou, Ramoudane Orou, Idrissou Bako, Ismaïl Moumouni, Mohamed Nasser Baco, and Adewole Olagoke. "Participatory Management of Tropical Dry Forests in Benin." In Research Anthology on Ecosystem Conservation and Preserving Biodiversity, 1734–53. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-6684-5678-1.ch084.
Тези доповідей конференцій з теми "Flexion à trois points":
Sebag, Annabel. "Trois petits points." In SA '11: SIGGRAPH Asia 2011. New York, NY, USA: ACM, 2011. http://dx.doi.org/10.1145/2077356.2425733.
Sebag, Annabel. "Trois Petits Points." In ACM SIGGRAPH 2011 Computer Animation Festival. New York, New York, USA: ACM Press, 2011. http://dx.doi.org/10.1145/2019001.2019080.
Most, Ephrat, Guoan Li, and Harry E. Rubash. "Tibiofemoral Contact After Conventional and High-Flexion Posterior Cruciate-Retaining Total Knee Arthroplasty." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-43827.
"Sensitivity of elbow flexion and extension moment arms relative to the number and location of wrapping points." In Proceedings of the 1997 16 Southern Biomedical Engineering Conference. IEEE, 1997. http://dx.doi.org/10.1109/sbec.1997.583305.
Yazdi, Seyed Kamaleddin Mostafavi, Farzam Farahmand, and Ali Jafari. "Tracking the 3D Configuration of Human Joint Using an MR Image Registration Technique." In ASME 2010 5th Frontiers in Biomedical Devices Conference. American Society of Mechanical Engineers, 2010. http://dx.doi.org/10.1115/biomed2010-32057.
Tse, Chi-Yin, Hamid Nayeb-Hashemi, Ashkan Vaziri, and Paul K. Canavan. "A Subject Specific Kinematic and Kinetic Relationship During a Single-Leg Drop Landing." In ASME 2012 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2012. http://dx.doi.org/10.1115/imece2012-86383.
Thompson, Thomas J., and Erkai Watson. "Speciknee: An Engineering Software Tool for Design of Simple Four-Bar Prosthesis Joints for Above-Knee Amputees." In ASME 2014 International Design Engineering Technical Conferences and Computers and Information in Engineering Conference. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/detc2014-34015.
Ranu, Harcharan Singh. "Development of a New Artificial Knee Joint for an Asian and Middle Eastern Population." In ASME 2013 Conference on Frontiers in Medical Devices: Applications of Computer Modeling and Simulation. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/fmd2013-16008.
Бобринский, А. А. "Covers of Clay Vessels’ Functional Parts (Published in 1991)." In ФОРМЫ ГЛИНЯНЫХ СОСУДОВ КАК ОБЪЕКТ ИЗУЧЕНИЯ. Crossref, 2018. http://dx.doi.org/10.25681/iaras.2018.978-5-94375-254-4.41-59.
Ali, Hussein F. M., Hangyeol Baek, Taesoo Jang, and Youngshik Kim. "Finger-Like Mechanism Using Bending Shape Memory Alloys." In ASME 2020 29th Conference on Information Storage and Processing Systems. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/isps2020-1931.