Готові списки джерел за темами / FIPS 140-3

Добірка наукової літератури з теми "FIPS 140-3"

Автор: Grafiati
Опубліковано: 30 травня 2022
Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Зміст

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "FIPS 140-3".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "FIPS 140-3"

1

STAMMERS, M. "144 pp., 143 figs, including colourH. Menzel, Smakken, Kuffen, Galioten Dm 68, Ernst Kabel Verlag GmbH, London (1997) ISBN 3-8225-0413-0." International Journal of Nautical Archaeology 27, no. 4 (November 1998): 366–67. http://dx.doi.org/10.1016/s1057-2414(98)80012-5.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Dizlek, Hulya, Mehmet Karagoz, Farid Faraji, and Ibrahim Cakmak. "Mites in dried figs of Turkey: diversity, species composition and density." Systematic and Applied Acarology 24, no. 6 (June 19, 2019): 992–97. http://dx.doi.org/10.11158/saa.24.6.4.

Повний текст джерела
Анотація:
This study was conducted to determine mite species in dried figs in Aydin, Turkey between August 2014 and November 2016. A total of 141 dried fig samples were taken from producers’ storage, commercial storages and fig processing factories in Buharkent, Germencik, Incirliova, Kocarli, Kosk, Kuyucak, Merkez, Nazilli, Sultanhisar and Yenipazar districts. In addition, 24 dried fig samples were kept in storage for 8 months and the changes in mite species composition and their densities in stored figs were determined. As a result, 8 mite species belonging to 3 orders and 5 families were identified from the dried figs. Acarus siro L., Carpoglyphus lactis (L.), Glycyphagus destructor (Schrank), G. domesticus (De Geer) and Tyrophagus putrescentiae (Schrank) as pest species, and Blattisocius tarsalis (Berlese), B. mali (Oudemans) and Cheyletus eruditus (Schrank) as predatory mite species were found. Out of 141 samples, 133 were infested with mites and the infestation ratio was 94.3%. Tyrophagus putrescentiae was the most common pest species with an infestation rate of 72.3%, followed by C. lactis with 34.8%, A. siro, G. destructor and G. domesticus with 0.7% contamination, respectively. Carpoglyphus lactis was found to have the highest density with 10,488 individuals/kg in contaminated fig samples. Blattisocius tarsalis was the most common predatory mite species with an infestation rate of 77.3%. Blattisocius mali and C. eruditus were found in 9.2% and 4.3% of dried figs, respectively. This study showed that the dried fig samples kept in storage were always vulnerable to contamination with mites. Mite species composition and their densities also fluctuated over time.
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Barragán, O., D. Gandolfi, F. Dai, J. Livingston, C. M. Persson, T. Hirano, N. Narita, et al. "K2-141 b." Astronomy & Astrophysics 612 (April 2018): A95. http://dx.doi.org/10.1051/0004-6361/201732217.

Повний текст джерела
Анотація:
We report on the discovery of K2-141 b (EPIC 246393474 b), an ultra-short-period super-Earth on a 6.7 h orbit transiting an active K7 V star based on data from K2 campaign 12. We confirmed the planet’s existence and measured its mass with a series of follow-up observations: seeing-limited MuSCAT imaging, NESSI high-resolution speckle observations, and FIES and HARPS high-precision radial-velocity monitoring. K2-141 b has a mass of 5.31 ± 0.46 M⊕ and radius of 1.54−0.09+0.10 R⊕, yielding a mean density of 8.00−1.45+1.83 g cm−3 and suggesting a rocky-iron composition. Models indicate that iron cannot exceed ~70% of the total mass. With an orbital period of only 6.7 h, K2-141 b is the shortest-period planet known to date with a precisely determined mass.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Spasov, Victor. "West Moesian uplifted hydrogeological system." Engineering Geology and Hydrogeology 34, no. 1 (2020): 29–44. http://dx.doi.org/10.52321/igh.34.1.29.

Повний текст джерела
Анотація:
A comprehensive analysis of the hydrogeological conditions in the westernmost part of the Bulgarian Danube Plain is presented. During the Neogene and Quaternary period this area is subjected to continuous uplift. As a result, river valleys are deeply incised into the terrain and all shallow aquifers are well drained in the hydrological network. This process determines the specific regime and dynamics of the groundwater, characteristic of the identified West Moesian uplifted hydrogeological system. The Quaternary aquifer is the most abundant in the system. It is formed in four riparian lowlands – two along the Timok River (Bregovska and Baley-Kudelin) and two along the Danube River (Novoselska and Vidin Lowlands) (Figs 1, 7, 8). The hydraulic properties of the aquifer are very good: Transmissivity T = 800-1000 m2/d and hydraulic conductivity K = 60-80 m/d. Several Ranney water collector wells extracting up to 140 L/s have been built in the Vidin lowland. Potential groundwater resources in this lowland are estimated at about 14 m3/s, with 13 m3/s being infiltrated from the Danube River. Second in importance in the hydrogeological system is the Sarmatian aquifer. It consists of two layers: upper – limestone and lower – sandy limestone (Figs 2 and 3). The waters are used for local water supply by capturing karst springs. The results of monitoring observations on the chemical composition of groundwater during the period 1980-1991 are presented in diagrams (Figs 4, 5, 6, 9, 11, 12, 13). Groundwater, being the only water source in the area, must be carefully protected from industrial and agricultural pollution.
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Fan, Lingye, Chunyan Wang, Ping Zhan, and Yaofang Liu. "miR-141-3p is Poorly Expressed in Polycystic Ovary Syndrome and Correlates with Glucose and Lipid Metabolism." International Journal of Endocrinology 2021 (October 8, 2021): 1–9. http://dx.doi.org/10.1155/2021/2022938.

Повний текст джерела
Анотація:
Polycystic ovary syndrome (PCOS) is a common endocrinopathy with high prevalence. miR-141-3p downregulation was reported in PCOS rats. This study intended to investigate miR-141-3p expression in serum of PCOS patients and its correlation with glucose and lipid metabolism. A total of 100 PCOS patients and 100 healthy controls were enrolled in this study. Clinical parameters and glucose and lipid indexes were analyzed. A 3-month fat reduction intervention was conducted to PCOS-obese patients. Expressions of miR-141-3p and PTEN were detected. WHR and levels of TG, HDL-C, FBG, FINS, HOMA-β, and HOMA-IR showed significant differences in PCOS patients. miR-141-3p was downregulated in PCOS patients. Area under ROC curve of miR-141-3p diagnosing PCOS-obese patients was 0.985 with specificity 95.35% and flexibility 93.33%. Levels of glucose and lipid metabolism indexes were increased while HDL-C level was decreased in miR-141-3p low expression group. Indexes of PCOS-obese patients were improved and miR-141-3p was upregulated after fat reduction intervention. PTEN was upregulated in PCOS patients and negatively correlated with miR-141-3p. In conclusion, miR-141-3p was downregulated in PCOS patients and had higher diagnostic value on PCOS and associated with glucose and lipid metabolism. miR-141-3p might play a role in glucose and lipid metabolism in PCOS-obese patients by targeting PTEN.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Wen, Shanshan. "ELITES IN CAMPANIA - (W.) Pietruszka The Municipal Elites of Campania during the Antonine-Severan Period. (Philippika 140.) Pp. x + 487, figs, map. Wiesbaden: Harrassowitz, 2020. Cased, €98. ISBN: 978-3-447-11452-3." Classical Review 71, no. 2 (August 2, 2021): 510–12. http://dx.doi.org/10.1017/s0009840x21002080.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Bilgi, Önder. "İkiztepe in the Late Iron Age." Anatolian Studies 49 (December 1999): 27–54. http://dx.doi.org/10.2307/3643060.

Повний текст джерела
Анотація:
Following a three year survey in the Samsun region between 1971 and 1973, excavations started at İkiztepe, situated on the outskirts of İkiztepe village near Bafra town, in 1974. The results obtained from the excavations since 1993 demonstrate that the Bafra region was also settled during the Late Iron Age (Bilgi 1995: 142; 1996: 157; 1997: 145).Intensive survey and subsequent excavations located no settlements at İkiztepe after the first quarter of the second millennium BC. A monumental tomb from the Hellenistic period, however, was found at Tepe I (fig 1. Alkım et al 1988: 85-7). In addition to this tomb, comprising a dromos and two chambers built of cut stone blocks, traces of a settlement with pottery (figs 23, 27:3-6, 27:13-14) and small metal objects (figs 2-4) were found during excavations on the northern slope of Tepe I (Bilgi 1985: 55-6, pls 12-15).
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Abbood, Sahar A., and Bengt Ake Sunden. "Numerical study of turbulent forced convection in a finned tube with and without CuO nano fluid." International Journal of Numerical Methods for Heat & Fluid Flow 26, no. 7 (September 5, 2016): 2252–70. http://dx.doi.org/10.1108/hff-04-2015-0146.

Повний текст джерела
Анотація:
Purpose The purpose of this paper is to carry out a numerical investigation to study forced convection for a tube with fins on the inner and outer surfaces with water as the base fluid and adding particles of CuO to have a nanofluid. Design/methodology/approach Three geometries are designed by using Solid Works and the number of inside fins is 20 with height 6 mm and thickness 1 mm. The number of outside fins is 20 with height 12 mm and thickness 1 mm. The length of the tube is 1,000 mm and the inner and outer diameter is 26 and 28 mm, respectively. The annular diameter is 60 mm. The geometries are imported to Gambit where the mesh is chosen and the boundary conditions are specified. The commercial software package Fluent version 14.0 has been used to numerically solve the governing equations for the three cases. Findings The temperature contours for the three models at different air velocities, i.e., 5, 7.5 and 10 m/s and water velocities 0.8, 1 and 3 m/s have been investigated. The enhancement of heat transfer by using CuO nanoparticles has been investigated at different nanofluid concentrations. Originality/value In this paper, a numerical study is presented to analyze internal and external longitudinal finned tubes with water inside and air outside, with and without nano CuO particles.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

St. Jean, Joseph. "Lectotype designation for Stromatoporella subvesiculosum (Lecompte, 1951) (Stromatoporoidea)." Journal of Paleontology 63, no. 6 (November 1989): 957. http://dx.doi.org/10.1017/s0022336000036738.

Повний текст джерела
Анотація:
Based on the lectotype specimen herein selected, Clathrodictyon amygdaloides subvesiculosum Lecompte is raised to species status and assigned to Stromatoporella. In Clathrodictyon amygdaloides subvesiculosum (1951, p. 143, PL 18, figs. 3, 3a, 3b), Lecompte thought that he had a specimen replicated by heteromorphic coenosteal lenses (“Les lentilles hétéromorphes”). Examination of his original slides in the collections of the Institute Royal des Sciences Naturelles de Belgique reveals that the specimen consists of overgrowths of several laminar coenostea demarcated by eroded coenosteal surfaces and, in places, intercalated matrix sediment (vertical sections). The coenostea belong to two different genera: Actinostroma, as indicated by its Y-shaped pillars and laminae composed of a transversely fibrous microfabric, and Stromatoporella, as demonstrated by the presence of ring-pillars and ordinocellular laminae.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Benítez de Lugo Enrich, Luis. "De Caso Bernal, Mercedes (2020): Las relaciones comerciales marítimas entre Andalucía occidental y el Mediterráneo central en el II milenio a.C. Oxford. Archaeopress Access Archaeology Publishing LTD. 140 pp., 30 figs. (27 pgs. en color), ISBN 978-1-78969 511-3 (impreso); 978-1-78969-512-0 (e-Pdf)." SPAL. Revista de Prehistoria y Arqueología de la Universidad de Sevilla 2, no. 29 (2020): 283–86. http://dx.doi.org/10.12795/spal.2020.i29.27.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "FIPS 140-3"

1

Коптєва, М. В., та Т. О. Гріненко. "Методики тестування квантових генераторів випадкових чисел". Thesis, ВА ЗС АР; НТУ "ХПІ"; НАУ, ДП "ПДПРОНДІАВІАПРОМ"; УмЖ, 2021. https://openarchive.nure.ua/handle/document/15761.

Повний текст джерела
Анотація:
Метою доповіді є проведення порівняльного аналізу сучасних методик тестування квантових генераторів випадкових чисел з використанням пакетів статистичних тестів NIST STS, Diehard, а також серії тестів FIPS 140-3. В доповіді надані результати тестування випадкової послідовності, що була отримана з використанням КГВЧ, методиками NIST STS, Diehard, та FIPS 140-3.
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "FIPS 140-3"

1

Teresa Papa Nabão, Maria. "Lembranças que tecem diferentes fios de uma mesma história." In Assentamentos rurais e cidadania: a construção de novos espaços de vida, 67–104. Faculdade de Filosofia e Ciências, 2011. http://dx.doi.org/10.36311/2011.978-85-7983-142-3.p67-104.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

"O. Lordkipanidze, Phasis: The River and City in Colchis, Geographica Historica 15, Franz Steiner Verlag, Stuttgart 2000; 146 pp., 16 figs. Paperback. ISBN 3-515-07271-3." In Ancient West & East, 491–96. BRILL, 2002. http://dx.doi.org/10.1163/9789004494206_021.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "FIPS 140-3"

1

Brakmann, Robin, Lingling Chen, Bernhard Weigand, and Michael Crawford. "Experimental and Numerical Heat Transfer Investigation of an Impinging Jet Array on a Target Plate Roughened by Cubic Micro Pin Fins." In ASME Turbo Expo 2015: Turbine Technical Conference and Exposition. American Society of Mechanical Engineers, 2015. http://dx.doi.org/10.1115/gt2015-42149.

Повний текст джерела
Анотація:
A generic impingement cooling system for turbomachinery application is modeled experimentally and numerically to investigate heat transfer and pressure loss characteristics. The experimental setup consists of an array of 9 by 9 jets impinging on a target plate with cubic micro pin fins. The cubic micro pin fins have an edge length of 0.22 D and enlarge the target area by 150%. Experimentally heat transfer is measured by the transient liquid crystal (TLC) method. The transient method used requires a heated jet impinging on a cold target plate. As reference temperature for the heat transfer coefficient we use the total jet inlet temperature which is measured via thermocouples in the jet center. The CFD model was realized within the software package ANSYS CFX. This model uses a steady state - 3D - RANS approach and the shear stress transport (SST) turbulence model. Boundary conditions are chosen to mimic the experiments as close as possible. The effects of different jet-to-plate spacing (H/D = 3–5), crossflow schemes and jet Reynolds number (15,000–35,000) are investigated experimentally and numerically. The results include local Nusselt numbers as well as area and line averaged values. Numerical simulations allow a detailed insight into the fluid mechanics of the problem and complement experimental measurements. A good overall agreement of experimental and numerical behavior for all investigated cases could be reached. Depending on the crossflow scheme the cubic micro pin fin setup increases the heat flux to about 134%–142% compared to a flat target plate. At the same time the Nusselt number slightly decreases. The micro pin fins increase the pressure loss by not more than 14%. The results show that the numerical model predicts the heat transfer characteristics of the cubic micro pin fins in a satisfactory way.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Fitnawan, Eko Awan, Bjørn Holien, and Harald Nevøy. "Successful Installations and Predictable Performance of Solid Expandable Drilling Liner in Greater Ekofisk Field, Offshore North Sea." In SPE/IADC International Drilling Conference and Exhibition. SPE, 2021. http://dx.doi.org/10.2118/204018-ms.

Повний текст джерела
Анотація:
Abstract Drilling the lower overburden section in specific parts of the Greater Ekofisk Area (GEA) fields can be very troublesome. Wells in these parts may intersect shales with high gas content in the upper section (requiring high mud weight) and unstable zones with massive lost circulation risk (requiring low mud weight) near the base of the interval. These challenges have raised the need for a contingency drilling liner to "split" the section in two parts. Rather than changing the basic well design, the operator fronted the development of an 8-5/8″ expandable drilling liner with high collapse resistance for this purpose. This string provides 8.514″ post-expansion drift ID that accommodate an 8 ½″ bit size for the reservoir section, which is critical for GEA well design strategy. In the past five years, the operator has successfully installed 31 800 ft of 8-5/8″ expandable liner in 27 different wellbores with near perfect track record. The average liner length installed is 1 140 ft per wellbore, with an average installation time of 2.8 rig days. The solid expandable tubular (SET) drilling liner has been utilized both as part of the planned well design and as contingency liner. It has, on occasions, been worked down with parameters outside the stated specifications and still been successfully expanded afterwards. The 8-5/8″ expandable liner is now a proven system and has been one of the key enablers to achieve well objectives by maintaining hole size in a predictable manner. It provides a better drilling window for reservoir drilling and reservoir liner cementing compared to a conventional 7-3/4″ liner alternative. It also enables further contingency solutions in case other difficulties arise in the reservoir section. This technical paper describes how the operator in the overcame a significant geological challenge by working with an expandable pipe supplier to develop a unique size and strength of expandable liner that fits with the base case GEA well design. The paper also reviews the installation experiences, associated risks, performance, and key learnings with expandable liners.
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "FIPS 140-3"

1

Schaffer, Kim. FIPS 140-3 derived test requirements (DTR):. Gaithersburg, MD: National Institute of Standards and Technology, March 2020. http://dx.doi.org/10.6028/nist.sp.800-140.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "FIPS 140-3" для конкретних типів джерел:
Статті в журналах
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії