Дисертації з теми "Finite State Airload Theory"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-36 дисертацій для дослідження на тему "Finite State Airload Theory".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Merryman, William Patrick. "Animating the conversion of nondeterministic finite state automata to deterministic finite state automata." Thesis, Montana State University, 2007. http://etd.lib.montana.edu/etd/2007/merryman/MerrymanW0507.pdf.
Повний текст джерелаYap, Ngee Thai. "Modeling syllable theory with finite-state transducers." Access to citation, abstract and download form provided by ProQuest Information and Learning Company; downloadable PDF file, 279 p, 2006. http://proquest.umi.com/pqdweb?did=1179954391&sid=4&Fmt=2&clientId=8331&RQT=309&VName=PQD.
Повний текст джерелаLiu, Jiuling. "A finite state machine synthesizer." PDXScholar, 1989. https://pdxscholar.library.pdx.edu/open_access_etds/3912.
Повний текст джерелаZhao, William Yue. "A new approach to state minimization of finite state machines." PDXScholar, 1989. https://pdxscholar.library.pdx.edu/open_access_etds/3951.
Повний текст джерелаKshatriya, Jagannath Rajini Singh. "Visualizing the minimization of a deterministic finite state automaton." Thesis, Montana State University, 2007. http://etd.lib.montana.edu/etd/2007/kshatriyajagannath/KshatriyaJagannathR1207.pdf.
Повний текст джерелаHayashi, Masahito. "Asymptotic estimation theory for a finite dimensional pure state model." 京都大学 (Kyoto University), 1999. http://hdl.handle.net/2433/181932.
Повний текст джерелаWang, Suning. "Classical and logic based control theory for finite state machines." Thesis, McGill University, 1991. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=70243.
Повний текст джерелаMason, Kahn. "Notes on the parallel decomposition theory of finite state machines." Thesis, University of Canterbury. Computer Science, 1998. http://hdl.handle.net/10092/8419.
Повний текст джерелаCazalis, Daniel S. "Algebraic Theory of Minimal Nondeterministic Finite Automata with Applications." FIU Digital Commons, 2007. http://digitalcommons.fiu.edu/etd/8.
Повний текст джерелаMogliacci, Sylvain [Verfasser]. "Probing the finite density equation of state of QCD via resummed perturbation theory / Sylvain Mogliacci." Bielefeld : Universitätsbibliothek Bielefeld, 2014. http://d-nb.info/1053467508/34.
Повний текст джерелаKhemuka, Atul Ravi. "Workflow Modeling Using Finite Automata." [Tampa, Fla.] : University of South Florida, 2003. http://purl.fcla.edu/fcla/etd/SFE0000172.
Повний текст джерелаMarwah, Gaurav. "Algorithms for stochastic finite memory control of partially observable systems." Master's thesis, Mississippi State : Mississippi State University, 2005. http://library.msstate.edu/etd/show.asp?etd=etd-07082005-132056.
Повний текст джерелаShin, Dong-Ryeol. "Optimal control of a finite state markov process under counting observation and applications to integrated networks." Diss., Georgia Institute of Technology, 1992. http://hdl.handle.net/1853/13081.
Повний текст джерелаDruma, Calin. "Formulation of steady-state and transient potential problems using boundary elements." Ohio : Ohio University, 1999. http://www.ohiolink.edu/etd/view.cgi?ohiou1175886094.
Повний текст джерелаPelino, Guglielmo. "Topics in finite state mean field games and non-Markovian interacting spin systems." Doctoral thesis, Università degli studi di Padova, 2019. http://hdl.handle.net/11577/3422695.
Повний текст джерелаCalzolari, Francesco. "Second quantization theory for many-particles stochastic dynamics on finite transport and storage capacity network." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2017. http://amslaurea.unibo.it/13553/.
Повний текст джерелаWu, Zhibo. "Equation of state for polytetrafluoroethylene (PTFE) and mixtures with PTFE." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/29696.
Повний текст джерелаCommittee Chair: Hanagud,Sathya; Committee Member: Apetre, Nicoleta; Committee Member: Kardomateas, George; Committee Member: McDowell, David L.; Committee Member: Ruzzene, Massimo. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Adedoyin, Adetokunbo Adelana. "Determination of best practice guidelines for performing large eddy simulation of flows in configurations of engineering interest." Master's thesis, Mississippi State : Mississippi State University, 2007. http://library.msstate.edu/etd/show.asp?etd=etd-06222007-140721.
Повний текст джерелаNikolic, Aleksandar. "The physics of multilayer topological insulator heterostructures using low-energy models." Thesis, University of Cambridge, 2018. https://www.repository.cam.ac.uk/handle/1810/283001.
Повний текст джерелаMüller, Tobias [Verfasser]. "A new perspective to strongly-interacting lattice fermions in the framework of density functional theory : from ground-state correlations to spin-charge separation at finite temperatures / Tobias Müller." Kassel : Universitätsbibliothek Kassel, 2021. http://d-nb.info/123338113X/34.
Повний текст джерелаSaers, Markus. "Translation as Linear Transduction : Models and Algorithms for Efficient Learning in Statistical Machine Translation." Doctoral thesis, Uppsala universitet, Institutionen för lingvistik och filologi, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-135704.
Повний текст джерелаAngus, Simon Douglas Economics Australian School of Business UNSW. "Economic networks: communication, cooperation & complexity." Awarded by:University of New South Wales. Economics, 2007. http://handle.unsw.edu.au/1959.4/27005.
Повний текст джерелаChalla, Subhash. "Nonlinear state estimation and filtering with applications to target tracking problems." Thesis, Queensland University of Technology, 1998.
Знайти повний текст джерелаNewhouse, Jack. "Explorations of the Aldous Order on Representations of the Symmetric Group." Scholarship @ Claremont, 2012. https://scholarship.claremont.edu/hmc_theses/35.
Повний текст джерелаGabriel, Naveen. "Automatic Speech Recognition in Somali." Thesis, Linköpings universitet, Statistik och maskininlärning, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-166216.
Повний текст джерелаБондаренко, Марина Олександрівна. "Забезпечення міцності тонкостінних конструкцій шляхом обґрунтування параметрів із використанням апроксимацій поверхонь відгуку". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37533.
Повний текст джерелаThe thesis in qualification for a scientific degree of Candidate of Technical Science in speciality 05.02.09 ‒ dynamics and strength of machines, National Technical University "Kharkiv Polytechnical Institute", Kharkiv, 2018. The dissertation deals with the development of approach and models for providing of structural strength of complicated thin-walled machine-building structures, which operate in the conditions of geometric and physical nonlinearities using design solution validation. The developed approach is based on the use of mathematical model for stress-strain state taking into account geometric and physical nonlinearities and methods of approximation for constructing functions describing the evaluated characteristics of the object under study. The various factors behind the search for design solutions (including characteristics of strength, rigidity, technological and economic factors), are being added into this function. During searching for design solutions it is proposed to successively use approximation models of various accuracy degrees. The developed algorithm for rational parameters search, which takes into account the peculiarities of the response surface shape observed in solving applied problems, is applied to them. In this case, the solution is sought over the whole range of parameter changes. Thus, in the search process, global trends of changes in design decisions are taken into account, and not local ones, as in other approaches. This allows obtain a rational solution that is stable to changes in parameters, which are possible in course of design work and production conditions. The developed algorithms and models are used for solving test and applied problems. In particular, recommendations for the body framing of the bus, freight car, the frame of the tractor cabin, the BTR-80 and MT-L hulls are developed. Computational and experimental verification of developed finite-element models was carried out. The research was carried out at three objects: on the upper part of BTR-80 armored personnel carrier mock-up, and on the prototypes of BTR-3E hull and covered railcar. During frequency characteristics studies, the oscillations excitation of the hull mock-up was effected by rubberized drummer influence at certain points of structure. With use of verified finite element models, the BTR-3E hull prototype was investigated. The experimental research technique provided impulsive action on the hull at a number of points, and fixation of time distributions of accelerations at these points by accelerometers. The results difference is in range of 8-12% for frequencies of free oscillations and for damping logarithmic decrement. Computational studies, and then full-scale tests are also subject to the covered railcar prototype made with recommended settings. Average difference for displacement and stress is 15%.
Бондаренко, Марина Олександрівна. "Забезпечення міцності тонкостінних конструкцій шляхом обґрунтування параметрів із використанням апроксимацій поверхонь відгуку". Thesis, НТУ "ХПІ", 2018. http://repository.kpi.kharkov.ua/handle/KhPI-Press/37536.
Повний текст джерелаThe thesis in qualification for a scientific degree of Candidate of Technical Science in speciality 05.02.09 ‒ dynamics and strength of machines, National Technical University "Kharkiv Polytechnical Institute", Kharkiv, 2018. The dissertation deals with the development of approach and models for providing of structural strength of complicated thin-walled machine-building structures, which operate in the conditions of geometric and physical nonlinearities using design solution validation. The developed approach is based on the use of mathematical model for stress-strain state taking into account geometric and physical nonlinearities and methods of approximation for constructing functions describing the evaluated characteristics of the object under study. The various factors behind the search for design solutions (including characteristics of strength, rigidity, technological and economic factors), are being added into this function. During searching for design solutions it is proposed to successively use approximation models of various accuracy degrees. The developed algorithm for rational parameters search, which takes into account the peculiarities of the response surface shape observed in solving applied problems, is applied to them. In this case, the solution is sought over the whole range of parameter changes. Thus, in the search process, global trends of changes in design decisions are taken into account, and not local ones, as in other approaches. This allows obtain a rational solution that is stable to changes in parameters, which are possible in course of design work and production conditions. The developed algorithms and models are used for solving test and applied problems. In particular, recommendations for the body framing of the bus, freight car, the frame of the tractor cabin, the BTR-80 and MT-L hulls are developed. Computational and experimental verification of developed finite-element models was carried out. The research was carried out at three objects: on the upper part of BTR-80 armored personnel carrier mock-up, and on the prototypes of BTR-3E hull and covered railcar. During frequency characteristics studies, the oscillations excitation of the hull mock-up was effected by rubberized drummer influence at certain points of structure. With use of verified finite element models, the BTR-3E hull prototype was investigated. The experimental research technique provided impulsive action on the hull at a number of points, and fixation of time distributions of accelerations at these points by accelerometers. The results difference is in range of 8-12% for frequencies of free oscillations and for damping logarithmic decrement. Computational studies, and then full-scale tests are also subject to the covered railcar prototype made with recommended settings. Average difference for displacement and stress is 15%.
Атрошенко, Александр Александрович. "Анализ конструкционной прочности составных тонкостенных конструкций с болтовым соединением элементов". Thesis, НТУ "ХПИ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21814.
Повний текст джерелаThesis for the degree of Candidate of technical Sciences in specialty 05.02.09 – dynamics and strength of machines. National technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2016. The thesis is devoted to the development of approaches, methods and models to study structural strength of composite thin-walled engineering structures with bolted elements. This work is solves the problem of analysis of the stress-strain state of composite thin-walled engineering structures with bolted elements, as well as its implementation and determination of the distribution of deflections, displacements and longitudinal efforts. Also in this formulation the following important factors were taken into account: the gap in bolted joints, friction force between the contacting surfaces, the pre-tightening of bolted connections, the presence of polymeric materials, as well as consideration of the corrugated shape of panels used. On the basis of mathematical models of the stress-strain state of the shell, the rod and plate structures, a mathematical model that takes into consideration the influence of axial forces and geometric nonlinearity in general on stress-strain state of composed thin-walled structures was elaborated in this thesis. The results of solving some applied problems were obtained. The regularities of changes of stress-strain state of thin-walled engineering structures at variation of design and process parameters were defined.
Атрошенко, Олександр Олександрович. "Аналіз конструкційної міцності складених тонкостінних конструкцій з болтовим з'єднанням елементів". Thesis, НТУ "ХПІ", 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/21789.
Повний текст джерелаThesis for the degree of Candidate of technical Sciences in specialty 05.02.09 – dynamics and strength of machines. National technical University "Kharkiv Polytechnic Institute", Ministry of Education and Science of Ukraine, Kharkiv, 2016. The thesis is devoted to the development of approaches, methods and models to study structural strength of composite thin-walled engineering structures with bolted elements. This work is solves the problem of analysis of the stress-strain state of composite thin-walled engineering structures with bolted elements, as well as its implementation and determination of the distribution of deflections, displacements and longitudinal efforts. Also in this formulation the following important factors were taken into account: the gap in bolted joints, friction force between the contacting surfaces, the pre-tightening of bolted connections, the presence of polymeric materials, as well as consideration of the corrugated shape of panels used. On the basis of mathematical models of the stress-strain state of the shell, the rod and plate structures, a mathematical model that takes into consideration the influence of axial forces and geometric nonlinearity in general on stress-strain state of composed thin-walled structures was elaborated in this thesis. The results of solving some applied problems were obtained. The regularities of changes of stress-strain state of thin-walled engineering structures at variation of design and process parameters were defined.
Скрипченко, Наталья Борисовна. "Контактное взаимодействие сложнопрофильных деталей машиностроительных конструкций с учетом локальной податливости поверхностного слоя". Thesis, НТУ "ХПИ", 2015. http://repository.kpi.kharkov.ua/handle/KhPI-Press/19908.
Повний текст джерелаThe thesis in qualification for a scientific degree of Candidate of Technical Science in speciality 05.02.09 - dynamics and strength of machines, National Technical University "Kharkiv Polytechnical Institute", Kharkiv, 2016. The thesis is devoted to development of approaches, methods and models for analysis of stress-strain state of complex-shaped bodies with account for their contact over rough surfaces. In the present work the contact problem is solved for complex-shaped elements of engineering structures with local compliance of the surface layer. For this purpose a variation to the boundary integral equations method extended with a Winkler-type model of elastic layer is proposed. The resulting approach combines in a unified formulation the "local" and "global" compliance characteristics of the contacting rough bodies. The numerical implementation of the boundary element method is included in a software-and-model complex for analysis of contact interaction of complex-shaped bodies. A number of applied contact problems is solved. Namely, the influence of the gap and rough layer compliance on the contact pressure distribution is studied for the following cases: contact of a rectangular round-end stamp with a flat surface, junction of a rolling bearing and a modified double-radius roller, normal traction between spherical pistons and treadmills of a tank transmission. Numerical results of the research are compared to experimental data. Accuracy and reliability of the proposed methods and models, as well as special-purpose software-andmodel complex are confirmed.
Скріпченко, Наталія Борисівна. "Контактна взаємодія складнопрофільних деталей машинобудівних конструкцій з урахуванням локальної податливості поверхневого шару". Thesis, ФО-П Дуюнова Т. В, 2016. http://repository.kpi.kharkov.ua/handle/KhPI-Press/19907.
Повний текст джерелаThe thesis in qualification for a scientific degree of Candidate of Technical Science in speciality 05.02.09 - dynamics and strength of machines, National Technical University "Kharkiv Polytechnical Institute", Kharkiv, 2016. The thesis is devoted to development of approaches, methods and models for analysis of stress-strain state of complex-shaped bodies with account for their contact over rough surfaces. In the present work the contact problem is solved for complex-shaped elements of engineering structures with local compliance of the surface layer. For this purpose a variation to the boundary integral equations method extended with a Winkler-type model of elastic layer is proposed. The resulting approach combines in a unified formulation the "local" and "global" compliance characteristics of the contacting rough bodies. The numerical implementation of the boundary element method is included in a software-and-model complex for analysis of contact interaction of complex-shaped bodies. A number of applied contact problems is solved. Namely, the influence of the gap and rough layer compliance on the contact pressure distribution is studied for the following cases: contact of a rectangular round-end stamp with a flat surface, junction of a rolling bearing and a modified double-radius roller, normal traction between spherical pistons and treadmills of a tank transmission. Numerical results of the research are compared to experimental data. Accuracy and reliability of the proposed methods and models, as well as special-purpose software-andmodel complex are confirmed.
"Parental finite state vector quantizer and vector wavelet transform-linear predictive coding." 1998. http://library.cuhk.edu.hk/record=b5889548.
Повний текст джерелаThesis submitted in: December 1997.
Thesis (M.Phil.)--Chinese University of Hong Kong, 1998.
Includes bibliographical references (leaves 89-91).
Abstract also in Chinese.
Chapter Chapter 1 --- Introduction to Data Compression and Image Coding --- p.1
Chapter 1.1 --- Introduction --- p.1
Chapter 1.2 --- Fundamental Principle of Data Compression --- p.2
Chapter 1.3 --- Some Data Compression Algorithms --- p.3
Chapter 1.4 --- Image Coding Overview --- p.4
Chapter 1.5 --- Image Transformation --- p.5
Chapter 1.6 --- Quantization --- p.7
Chapter 1.7 --- Lossless Coding --- p.8
Chapter Chapter 2 --- Subband Coding and Wavelet Transform --- p.9
Chapter 2.1 --- Subband Coding Principle --- p.9
Chapter 2.2 --- Perfect Reconstruction --- p.11
Chapter 2.3 --- Multi-Channel System --- p.13
Chapter 2.4 --- Discrete Wavelet Transform --- p.13
Chapter Chapter 3 --- Vector Quantization (VQ) --- p.16
Chapter 3.1 --- Introduction --- p.16
Chapter 3.2 --- Basic Vector Quantization Procedure --- p.17
Chapter 3.3 --- Codebook Searching and the LBG Algorithm --- p.18
Chapter 3.3.1 --- Codebook --- p.18
Chapter 3.3.2 --- LBG Algorithm --- p.19
Chapter 3.4 --- Problem of VQ and Variations of VQ --- p.21
Chapter 3.4.1 --- Classified VQ (CVQ) --- p.22
Chapter 3.4.2 --- Finite State VQ (FSVQ) --- p.23
Chapter 3.5 --- Vector Quantization on Wavelet Coefficients --- p.24
Chapter Chapter 4 --- Vector Wavelet Transform-Linear Predictor Coding --- p.26
Chapter 4.1 --- Image Coding Using Wavelet Transform with Vector Quantization --- p.26
Chapter 4.1.1 --- Future Standard --- p.26
Chapter 4.1.2 --- Drawback of DCT --- p.27
Chapter 4.1.3 --- "Wavelet Coding and VQ, the Future Trend" --- p.28
Chapter 4.2 --- Mismatch between Scalar Transformation and VQ --- p.29
Chapter 4.3 --- Vector Wavelet Transform (VWT) --- p.30
Chapter 4.4 --- Example of Vector Wavelet Transform --- p.34
Chapter 4.5 --- Vector Wavelet Transform - Linear Predictive Coding (VWT-LPC) --- p.36
Chapter 4.6 --- An Example of VWT-LPC --- p.38
Chapter Chapter 5 --- Vector Quantizaton with Inter-band Bit Allocation (IBBA) --- p.40
Chapter 5.1 --- Bit Allocation Problem --- p.40
Chapter 5.2 --- Bit Allocation for Wavelet Subband Vector Quantizer --- p.42
Chapter 5.2.1 --- Multiple Codebooks --- p.42
Chapter 5.2.2 --- Inter-band Bit Allocation (IBBA) --- p.42
Chapter Chapter 6 --- Parental Finite State Vector Quantizers (PFSVQ) --- p.45
Chapter 6.1 --- Introduction --- p.45
Chapter 6.2 --- Parent-Child Relationship Between Subbands --- p.46
Chapter 6.3 --- Wavelet Subband Vector Structures for VQ --- p.48
Chapter 6.3.1 --- VQ on Separate Bands --- p.48
Chapter 6.3.2 --- InterBand Information for Intraband Vectors --- p.49
Chapter 6.3.3 --- Cross band Vector Methods --- p.50
Chapter 6.4 --- Parental Finite State Vector Quantization Algorithms --- p.52
Chapter 6.4.1 --- Scheme I: Parental Finite State VQ with Parent Index Equals Child Class Number --- p.52
Chapter 6.4.2 --- Scheme II: Parental Finite State VQ with Parent Index Larger than Child Class Number --- p.55
Chapter Chapter 7 --- Simulation Result --- p.58
Chapter 7.1 --- Introduction --- p.58
Chapter 7.2 --- Simulation Result of Vector Wavelet Transform (VWT) --- p.59
Chapter 7.3 --- Simulation Result of Vector Wavelet Transform - Linear Predictive Coding (VWT-LPC) --- p.61
Chapter 7.3.1 --- First Test --- p.61
Chapter 7.3.2 --- Second Test --- p.61
Chapter 7.3.3 --- Third Test --- p.61
Chapter 7.4 --- Simulation Result of Vector Quantization Using Inter-band Bit Allocation (IBBA) --- p.62
Chapter 7.5 --- Simulation Result of Parental Finite State Vector Quantizers (PFSVQ) --- p.63
Chapter Chapter 8 --- Conclusion --- p.86
REFERENCE --- p.89
Malik, Tuhin. "Equation of state for dense matter from finite nuclei to neutron star mergers." Doctoral thesis, 2019. http://hdl.handle.net/10316/94981.
Повний текст джерелаEquation of state (EOS) of dense matter has been constrained from the experimental data available on the properties of finite nuclei and neutron stars. Towards this purpose, a diverse set of nuclear energy density functionals based on relativistic and non-relativistic mean field models have been employed. These EOSs are so chosen that they are consistent with the bulk properties of the finite nuclei. The values of various nuclear matter parameters which predominantly govern the behaviour of the EOS are determined through their correlations with the properties of the neutron stars such as radii, tidal deformability and maximum mass of the neutron stars. The nuclear matter parameters considered are incompressibility, symmetry energy and their density derivatives which appear in the expansion of the EOS around the saturation density. The radii and tidal deformability of the neutron star with the canonical mass display strong correlations with the linear combinations of slopes of the incompressibility and symmetry energy coefficients. Similar correlations with the curvature of the symmetry energy coefficient are also obsvered indicating that the properties of the neutron stars are sensitive to the high density behaviour of the symmetry energy. It is also shown that the giant resonances in nuclei are instrumental in limiting the tidal deformability parameter and the radius of a neutron star in somewhat narrower bounds. The outcomes of the present thesis is important in view of the fact that the accurate values of the various neutron star observables as considered are expected to be available in near future.
"Finite-state methods and natural language processing : 6th International Workshop, FSMNLP 2007 Potsdam, Germany, september 14 - 16 ; revised papers." Universität Potsdam, 2008. http://opus.kobv.de/ubp/volltexte/2008/2381/.
Повний текст джерелаTagungsband mit den Beiträgen der FSMNLP (Finite-state Methods and Natural Language Processing) 2007 in Potsdam
Balasubramanian, Bharath. "Fault tolerance in distributed systems : a coding-theoretic approach." Thesis, 2012. http://hdl.handle.net/2152/ETD-UT-2012-08-5980.
Повний текст джерелаtext
Ang, Thomas. "Problems Related to Shortest Strings in Formal Languages." Thesis, 2010. http://hdl.handle.net/10012/5162.
Повний текст джерела