Дисертації з теми "Finite element analysis"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Finite element analysis".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Margetts, Lee. "Parallel finite element analysis." Thesis, University of Manchester, 2002. http://www.manchester.ac.uk/escholar/uk-ac-man-scw:70784.
Повний текст джерелаLarsson, Jesper. "Spring Element Evaluation Using Finite Element Analysis." Thesis, Högskolan i Jönköping, Tekniska Högskolan, 2019. http://urn.kb.se/resolve?urn=urn:nbn:se:hj:diva-45837.
Повний текст джерелаWong, S.-W. "Element-by-element methods in transient analysis." Thesis, University of Manchester, 1987. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.383902.
Повний текст джерелаBakhtiari, Siamak. "Stochastic finite element slope stability analysis." Thesis, University of Manchester, 2011. https://www.research.manchester.ac.uk/portal/en/theses/stochastic-finite-element-slope-stability-analysis(c1b451d9-8bf6-43ff-9c10-7b5209fb45c1).html.
Повний текст джерелаMonaghan, Dermot James. "Automatically coupling elements of dissimilar dimension in finite element analysis." Thesis, Queen's University Belfast, 2000. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.326293.
Повний текст джерелаBerger, Stephanie 1981. "Experimental and finite element analysis of high pressure packer elements." Thesis, Massachusetts Institute of Technology, 2004. http://hdl.handle.net/1721.1/28879.
Повний текст джерелаIncludes bibliographical references (leaf 30).
Packer elements are traditionally rubber seals that can operate under specified downhole conditions and provide a seal for either a short-term, retrievable, or a long-term, permanent, completion. In this case a retrievable 19.7cm (7-3/4") packer element for a high-pressure high-temperature (HPHT) environment was designed and tested. The element created a seal between the mandrel, or tubing, and the casing. At high temperature and pressure rubber needs to be contained so that it will create and maintain an energized seal. In this study only Aflas rubber was tested. Various backup systems were examined; some more traditional designs such as the carbon steel foldback ring were compared to more experimental ideas. Results of theoretical simulations were compared to actual test results in order to gain a greater understanding of element behavior. Experiments were also performed to study the process of element setting, which is difficult to observe due to the high pressures and temperatures required. In a related study alternative materials to rubber such as annealed high-conductivity oxygen-free copper were tested to determine if the properties could be applied for packer element applications. The most successful design was the foldback ring with an anti-extrusion PEEK ring under the gage ring. This design passed a liquid test at 134 MPa (19.5k psi) differential pressure and a gas test at 87.6 MPa (12.7k psi) differential pressure. New designs such as the split ring with mesh and the garter spring with mesh did not pass fixture tests but could be successful with further modifications. FEA was used as an analytical tool to create simulations of the element after a setting force is applied. The modeling was shown to correlate to the actual test results and therefore it would be a good tool to use in future studies.
by Stephanie Berger.
S.M.
Xiao, Dong Wen. "Efficiency analysis on element decomposition method for stochastic finite element analysis." Thesis, University of Macau, 2000. http://umaclib3.umac.mo/record=b1636334.
Повний текст джерелаIrfanoglu, Bulent. "Boundary Element-finite Element Acoustic Analysis Of Coupled Domains." Phd thesis, METU, 2004. http://etd.lib.metu.edu.tr/upload/12605360/index.pdf.
Повний текст джерелаJacobs, Ralf Theo. "Finite element-boundary element analysis of conformal microstrip antennas." Thesis, Heriot-Watt University, 2001. http://hdl.handle.net/10399/531.
Повний текст джерелаElofsson, Johan, and Per Martinsson. "Welding simulation with Finite Element Analysis." Thesis, University West, Department of Technology, Mathematics and Computer Science, 2004. http://urn.kb.se/resolve?urn=urn:nbn:se:hv:diva-827.
Повний текст джерелаJohannessen, Kjetil André. "An adaptive isogeometric finite element analysis." Thesis, Norwegian University of Science and Technology, Department of Mathematical Sciences, 2009. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-9936.
Повний текст джерелаIn this thesis we will explore the possibilities of making a finite element solver for partial differential equations using the isogeometric framework established by Hughes et al. Whereas general B-splines and NURBS only allow for tensor product refinement, a new technology called T-splines will open for true local refinement. We will give an introduction into T-splines along with B-splines and NURBS on which they are built, presenting as well a refinement algorithm which will preserve the exact geometry of the T-spline and allow for more control points in the mesh. For the solver we will apply a residual-based a posteriori error estimator to identify elements which contribute the most to the error, which in turn allows for a fully automatic adaptive refinement scheme. The performance of the T-splines is shown to be superior on problems which contains singularities when compared with more traditional splines. Moreover the T-splines along with a posteriori error estimators are shown to have a very positive effect on badly parametrized models, as it seem to make the solution grid independent of the original parametrization.
Risa, Adrian Opheim. "Finite element analysis of marine umbilical." Thesis, Norges teknisk-naturvitenskapelige universitet, Institutt for marin teknikk, 2011. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-15368.
Повний текст джерелаWitte, Holger. "Magnet design using finite element analysis." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.491607.
Повний текст джерелаWagner, Roy E. "Finite element analysis of wire coating." Thesis, University of Ottawa (Canada), 1987. http://hdl.handle.net/10393/5236.
Повний текст джерелаWanstreet, Pinar. "Finite element analysis of slope stability." Morgantown, W. Va. : [West Virginia University Libraries], 2007. https://eidr.wvu.edu/etd/documentdata.eTD?documentid=5480.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains xii, 86 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 80-82).
Perry, William H. "Finite element analysis of polymer flows." Ohio : Ohio University, 1985. http://www.ohiolink.edu/etd/view.cgi?ohiou1184072781.
Повний текст джерелаMousa, A. I. "Finite element analysis of shell structure." Thesis, Cardiff University, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.532180.
Повний текст джерелаLee, J. S. "Finite element analysis of structured media." Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.637869.
Повний текст джерелаWilkerson, Lucas T. "FINITE ELEMENT ANALYSIS OF CANCELLOUS BONE." UKnowledge, 2012. http://uknowledge.uky.edu/me_etds/17.
Повний текст джерелаEl-Erris, Hazim Faysal. "Finite element analysis of shell structures." Thesis, Cardiff University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.329658.
Повний текст джерелаBegg, Michael Colin. "Finite element analysis of induction motors." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/37942.
Повний текст джерелаBehroozi, Mohammad H. "Finite element analysis of aircraft tyres." Thesis, University of Birmingham, 2014. http://etheses.bham.ac.uk//id/eprint/5390/.
Повний текст джерелаHsiao, Yung-Chin. "Finite element analysis of laser forming." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/17440.
Повний текст джерелаIncludes bibliographical references (leaves 158-161).
by Yung-Chin Hsiao.
M.S.
Noelting, Swen Erik 1960. "FINITE ELEMENT ANALYSIS OF SHELL STRUCTURES." Thesis, The University of Arizona, 1986. http://hdl.handle.net/10150/275502.
Повний текст джерелаXia, Jianjun. "Finite Element Analysis of Ship Collisions." Thesis, Virginia Tech, 2001. http://hdl.handle.net/10919/34133.
Повний текст джерелаMaster of Science
Bentler, David J. "Finite Element Analysis of Deep Excavations." Diss., Virginia Tech, 1998. http://hdl.handle.net/10919/30767.
Повний текст джерелаPh. D.
Wilson, Kelly A. "Finite Element Analysis of Breast Implants." Thesis, Virginia Tech, 1999. http://hdl.handle.net/10919/32972.
Повний текст джерелаMaster of Science
Seay, Patricia Anne. "Finite Element Analysis of Geotextile Tubes." Thesis, Virginia Tech, 1998. http://hdl.handle.net/10919/36592.
Повний текст джерелаMaster of Science
Perry, William H. Jr. "Finite element analysis of polymer flows." Ohio University / OhioLINK, 1985. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1184072781.
Повний текст джерелаMahomed, N. "Finite element analysis of groundwater contamination." Master's thesis, University of Cape Town, 1990. http://hdl.handle.net/11427/8294.
Повний текст джерелаThe purpose of this study was to develop a computational Finite Element model, validated by experimentation, to assist in the understanding of groundwater contamination problems. It was mainly aimed at studying the extent and manner of travel of contaminants in the saturated soil of unconfined aquifers which may be pumped by of wells.
Zheng, Yi. "Finite Element Analysis for Fixture Stiffness." Link to electronic thesis, 2005. http://www.wpi.edu/Pubs/ETD/Available/etd-050505-130954/.
Повний текст джерелаNava, JoseÌ Manuel Franco. "Finite element versus boundary element analysis of finite strain elastic and elastoplastic fracture mechanics." Thesis, Cranfield University, 2004. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.401612.
Повний текст джерелаLai, Zhi Cheng. "Finite element analysis of electrostatic coupled systems using geometrically nonlinear mixed assumed stress finite elements." Diss., Pretoria : [s.n.], 2007. http://upetd.up.ac.za/thesis/available/etd-05052008-101337/.
Повний текст джерелаTseng, Gordon Bae-Ji. "Investigation of tetrahedron elements using automatic meshing in finite element analysis /." Online version of thesis, 1992. http://hdl.handle.net/1850/10699.
Повний текст джерелаSvensson, Daniel, and Tomas Walander. "Evaluation of an Interphase Element using Explicit Finite Element Analysis." Thesis, University of Skövde, School of Technology and Society, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:his:diva-3895.
Повний текст джерелаA research group at University of Skövde has developed an interphase element for implementation in the commercial FE-software Abaqus. The element is using the Tvergaard & Hutchinson cohesive law and is implemented in Abaqus Explicit version 6.7 using the VUEL subroutine. This bachelor degree project is referring to evaluate the interphase element and also highlight problems with the element.
The behavior of the interphase element is evaluated in mode I using Double Cantilever Beam (DCB)-specimens and in mode II using End Notch Flexure (ENF)-specimens. The results from the simulations are compared and validated to an analytical solution.
FE-simulations performed with the interphase element show very good agreement with theory when using DCB- or ENF-specimens. The only exception is when an ENF-specimen has distorted elements.
When using explicit finite element software the critical time step is of great importance for the results of the analyses. If a too long time step is used, the simulation will fail to complete or complete with errors. A feasible equation for predicting the critical time step for the interphase element has been developed by the research group and the reliability of this equation is evaluated.
The result from simulations shows an excellent agreement with the equation when the interphase element governs the critical time step. However when the adherends governs the critical time step the equation gives a time step that is too large. A modification of this equation is suggested.
Galuta, Ezeedin M. "Combined boundary element and finite element analysis of composite bridges." Thesis, University of Ottawa (Canada), 1994. http://hdl.handle.net/10393/6814.
Повний текст джерелаAbou, Ghadir Mohamed Mohamed Moustafa. "Combined finite strip and finite element methods in structural analysis." Thesis, University of Leeds, 2005. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.446434.
Повний текст джерелаVarghese, Julian. "Hierarchical strategy for rapid finite element analysis." Thesis, Texas A&M University, 2003. http://hdl.handle.net/1969.1/232.
Повний текст джерелаLi, Jingang. "Isogeometric Finite Element Analysis Using T-Splines." Diss., CLICK HERE for online access, 2009. http://contentdm.lib.byu.edu/ETD/image/etd3159.pdf.
Повний текст джерелаBodur, Mehmet Ata. "Finite Element Analysis Of Discontinuous Contact Problems." Master's thesis, METU, 2006. http://etd.lib.metu.edu.tr/upload/12606964/index.pdf.
Повний текст джерелаnamely plane stress, plane strain and axi-symmetric formulations is aimed. The problem is solved numerically, with Finite Element Method, and an Object Oriented computer program in C++ for this purpose is written, and the results are verified with some basic analytic solutions and ABAQUS package program. It is not aimed in this thesis work to give a new solution in the area of solution of contact problems, but instead, it is aimed to form a strong basis, and computational library, which is extendible for further development of the subject to include friction, plasticity, and different material modeling in this advanced field of mechanics.
Zhang, Lin. "Generalized finite element method for multiscale analysis." Diss., Texas A&M University, 2003. http://hdl.handle.net/1969.1/1141.
Повний текст джерелаGanendra, Dennis. "Finite element analysis of laterally loaded piles." Thesis, Imperial College London, 1993. http://hdl.handle.net/10044/1/7304.
Повний текст джерелаChen, Yuan Liang. "Finite element analysis of reinforced concrete members." Thesis, University of Ottawa (Canada), 1985. http://hdl.handle.net/10393/4842.
Повний текст джерелаNelson, Gregory Scott. "Finite element analysis of the interventricular septum." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape8/PQDD_0033/NQ38494.pdf.
Повний текст джерелаNandula, Ramgopal. "Finite element analysis of eccentrically loaded angles." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0013/MQ52474.pdf.
Повний текст джерелаBucci, Filippo. "Finite element analysis of repaired concrete structures." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1998. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape11/PQDD_0003/MQ40918.pdf.
Повний текст джерелаValentin, Rodolfo V. "Finite element analysis of adhesively bonded joints." Thesis, Georgia Institute of Technology, 1997. http://hdl.handle.net/1853/17575.
Повний текст джерелаGray, Hans. "Finite element analysis of the human tibia." Thesis, University of Oxford, 2007. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.442458.
Повний текст джерелаGislason, Magnus Kjartan. "Finite element analysis of the wrist joint." Thesis, University of Strathclyde, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.501701.
Повний текст джерелаPaw, G. F. "Parallel processing procedures for finite element analysis." Thesis, Swansea University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.638432.
Повний текст джерела