Дисертації з теми "Film souple"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Film souple".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
PERRIN, GERALDINE. "Elaboration par pvd et caracterisation de couches minces ferromagnetiques sur film souple pour des applications hyperfrequence." Université Joseph Fourier (Grenoble), 1996. http://www.theses.fr/1996GRE10199.
Повний текст джерелаAuvray, Loïc. "Mise en évidence de structures bicontinues et aléatoires dans les microémulsions de Winsor à film interfacial souple : relations structure-courbure du film-basses tensions interfaciales." Paris 11, 1985. http://www.theses.fr/1985PA112060.
Повний текст джерелаWe have studied by small angle scattering of X-rays and neutrons the structure of concentrated Winsor micro emulsions, which contain comparable proportions of oil and water and are associated to very law interfacial tensions. We have obtained four essential experimental results: i) the Winsor micro emulsions are colloidal dispersed systems. A surfactant interfacial film, evidenced by the asymptotic behaviors of the scattered intensity, separates oils from water at microscopic scales. Ii) The structure of these micro emulsions is random. The film mean radius of curvature is proportional to the product of the oil and water volume fraction and inversely proportional to the surfactant concentration, as predicted the theories of random micro emulsions proposed by Talmon-Prager and de GennesJouffroy-Levinson. Iii) These micro emulsions are bicontinuous: the film average mean curvature, deduced from contrast variations experiments, varies continuously with the oil volume fraction and vanishes when the micro emulsion contains as much ail as water. Iv) The water (or oil) correlations at large scale are excluded volume like correlations. They are well interpreted by the existence in the micro emulsion of elementary correlated volumes of oil and water, whose size is well defined and fixed by the film stiffness. We theoretically relate the structure of the interface between a micro emulsion and an oil (or water) phase in excess and the variations of the interfacial tensions with salinity to the effects of the surfactant interfacial film spontaneous curvature
Thérien, Francis. "Conception et calibration de capteurs de mouvement à film diélectrique pour robots souples multi-degrés de liberté." Mémoire, Université de Sherbrooke, 2015. http://hdl.handle.net/11143/8388.
Повний текст джерелаRuellan, Alexandre. "Conception raisonnée à l’aide de la formulation et du procédé d’un film souple biosourcé et biodégradable pour l’emballage alimentaire." Electronic Thesis or Diss., Paris, AgroParisTech, 2015. http://www.theses.fr/2015AGPT0032.
Повний текст джерелаThe use of renewable resources and the production of biodegradable materials are appropriate solutions to reduce the environmental impact of the sector of plastics. There is thus a demand for eco-friendly products on the market provided they obtain performance equal or superior to synthetic materials currently used. One possibility, widely used in the food sector, to achieve efficient packaging film is the creation of multilayer structures by combining advantageous properties of different plastics. In this case, recycling of materials is difficult and the biodegradability of the packaging becomes relevant. This study proposes designing biobased and biodegradable films for food packaging from polylactide and co- products of the oil mill industry as additives, in particular the deodorization condensates. Among these lasts, the partial solubility of their molecules and the synergetic effect of the liquid and solid fat components at room temperature, depending on their alkyl chain length and unsaturation ratio, have both been observed to be responsible for the ductility increase, while the higher than room temperature glass transition of PLA and its interesting rigidity were retained. Addition of PHBV to the formulated PLA with oil by-products has also been studied, mainly leading to a significant improvement in the thermomechanical resistance of the material. Scaled-up trials comprising the production of formulated pellets, cast extruded films and their printing using industrial devices were performed. Finally, with the help of the “Laboratoire National de Métrologie et d’Essais” (LNE), the compliance with requirements of Food Contact Material regulation of a formulated film of PLA, as well as its biodegradability according to the EN 13432 standard, have both been proved
Tricot, Fanny. "Films réinscriptibles sur supports souples." Thesis, Lyon, 2016. http://www.theses.fr/2016LYSES007/document.
Повний текст джерелаPrevious research conducted at laboratory Hubert Curien led to the development of photosensitive Ag: TiO2 films on glass as support for updatable or permanent patterns. An adaptation of this work to plastic and paper substrates is proposed here to broaden the possible application areas such as goods secure labeling, for example. Fabrication techniques of Ag: TiO2 films compatible with flexible substrates have been developed, using two different paths. The first uses the combination of Sol-Gel chemistry with the EISA method. Deposition processes such as spin coating, inkjet or flexographic printing are used to form a mesoporous film of TiO2 on substrates. Treatments based on solvent extraction or infrared annealing have been devised to release the porosity of the film without damaging the supports. Silver salt is either introduced into the titania pores by soaking the films into a silver salt solution or added to the sol before its coating. The second developed option proposes formulating an aqueous ink jet ink made of TiO2 nanoparticles and silver ions by adapting the composition of a commercial suspension of TiO2 with the requirements of the ink jet process. After printing, the ink is dried by infrared annealing. The photochromic behavior under UV and visible light exposures of fabricated films allows to get coloring and bleaching reversibly. Sol-Gel films coated on plastic can also be a support for permanent colored patterns realized by irradiation with a visible light of certain intensity
Mackay, Jem. "www.swarmtv.net : non-hierarchy through open source approaches to distributed filmmaking." Thesis, University of the Arts London, 2015. http://ualresearchonline.arts.ac.uk/8756/.
Повний текст джерелаTomlinson, Andrew Simon. "Windows and souls : contrary imaginations in film." Thesis, University of Ulster, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.268547.
Повний текст джерелаGregori, Damia. "Revêtements photocatalytiques pour substrats organiques souples." Thesis, Lyon 1, 2014. http://www.theses.fr/2014LYO10060/document.
Повний текст джерелаHeterogeneous photocatalysis was widely developed these last years for water and air depollution. Applications on organic and flexible substrates, like textiles, induce many challenges. The coating must be photoactive without damaging the media. With the use of TiO2 as photocatalyst, a good fixation of the particles is essential to prevent their release into the environment. The material structuration is also an important point. Film porosity promotes pollutants/photocatalysts interactions but must be obtained at low temperatures to avoid textiles degradation. In this context, we chose to synthesize composite coatings inserting commercial TiO2 particles into a silica matrix used as binder and protective layer. The matrix is prepared by the sol-gel process that allows adding organic groups into the silicate network. Such modification of the structure provides flexibility to maintain the mechanical properties of the supports. Our study is devoted to the development and optimization of these systems. The first part was conducted on inorganic substrates to define models behavior before transferring the technology on textiles. Film efficiency was evaluated in gas and aqueous phase degrading formic acid, methylene blue and toluene. The UV stability of the media and the film was followed by several analytical techniques (SEM, XPS, ToF-SIMS, NMR, contact angle, IR, colorimetry) accelerating the photoaging of the materials. Various mechanical characterizations came to complete our study
Ivana, Maraš. "Percepcija i imaginacija urbanog pejzaža u XX i XXI veku: kinematografske projekcije grada." Phd thesis, Univerzitet u Novom Sadu, Fakultet tehničkih nauka u Novom Sadu, 2019. https://www.cris.uns.ac.rs/record.jsf?recordId=110272&source=NDLTD&language=en.
Повний текст джерелаThe thesis explores numerous and different relations between the city andfilm medium. It has been considered how cinematic images of urbanlandscape have become their integral, inseparable part, and how thisinfluences changes in the perception of architectural spaces and the urbanenvironment, as well as changes in the way in which people interact withthem. By examining the representation of cities in films, urban developmenttrends have been studied and socio-spatial changes taking place in largeEuropean and North American cities from the beginning of the 20th centuryto the present day have been analyzed and interpreted.
Beam, Brooke W. "Lights, Cameras, and Agricultural Documentaries: Understanding viewers’ interpretation of source credibility in food documentary films." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1500448684766755.
Повний текст джерелаMartinot, Emmanuelle. "Indentation de films élastiques complexes par des sondes souples." Phd thesis, Université Paris Sud - Paris XI, 2012. http://tel.archives-ouvertes.fr/tel-00786422.
Повний текст джерелаAldelaijan, Saad. "Reference dosimetry of HDR Ir-192 brachytherapy source using radiochromic film." Thesis, McGill University, 2010. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=95205.
Повний текст джерелаUn protocole d'établir film radiochromique dosimétrie de référence en fonction de débit de dose élevé source Ir-192 curiethérapie été évalués et décrits. Une comparaison entre les courbes d'étalonnage créé dans l'eau et Solid WaterTM sont fournis. Solid WaterTM s'est révélée être une alternative viable à l'eau dans l'établissement de la courbe d'étalonnage pour les Ir-192 faisceau de rayonnement. Un facteur de correction de Monte Carlo a été calculé pour convertir la dose à l'eau en dose à Solid WaterTM et les méthodes expérimentales que nous avons réalisé d'accord avec les résultats de Monte Carlo où le ratio (DSW/DW)Ir-192 a été trouvé à 0.9808 ± 0.14% (1σ). EBT-2 modèle GAFCHROMICTM film a également été étudiée pour les propriétés d'absorption et jugé être un moins sensible que son prédécesseur (EBT-1) en termes de variation nette de l'absorbance, mais cela n'a pas d'incidence sur la valeur dosimétrique que ce film possède. Une méthode d'évaluation des doses d'erreur a été décrit pour le modèle EBT-2 film (et est applicable à d'autres types ainsi) qui permet d'établir les contraintes de temps d'erreur sur le post-irradiation temps de balayage, qui va encore donner une erreur de dose acceptable pour des applications cliniques, si le protocole emploie le plus court post-irradiation de numérisation temps est mis en uvre dans la clinique. Nous montrons que pour deux post-irradiation de numérisation fois de 30 minutes et 24 heures, la dose d'erreur de 1% peut être accordée si la fenêtre de temps de balayage est inférieure à ± 5 minutes et de ± 2 heures, respectivement. Performance de la EBT-2 modèle a également été évaluée dans l'eau et il a été conclu un protocole de correction proposé est nécessaire pour que les temps d'immersion supérieure à 2 heures. Cette correction a été testé avec la courbe de calibration créée à partir d'installation de l'eau et ont été jugés effic
Black, Matthew R. "Suggestion Box." Digital Commons at Loyola Marymount University and Loyola Law School, 2018. http://www.kaltura.com/tiny/02n6c.
Повний текст джерелаKiani, Ahmed. "Analysis of metal oxide thin film transistors with high-k dielectrics and source/drain contact metals." Thesis, University of Cambridge, 2014. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.648586.
Повний текст джерелаBickenbach, Anke. "Der funktionelle Gebrauch von Source-Music als autonome Musik in einer Auswahl von Wim-Wenders-Filmen." [Köln] : [Univ.- und Stadtbibliothek], 2008. http://d-nb.info/99073661X/34.
Повний текст джерелаSporea, Radu. "Polysilicon thin-film source-gated transistors for mixed signal large area electronics." Thesis, University of Surrey, 2010. http://epubs.surrey.ac.uk/782735/.
Повний текст джерелаGold, Jeffrey Stephen. "Characterization of a novel methyl radical source and related thin film growth studies." Morgantown, W. Va. : [West Virginia University Libraries], 2000. http://etd.wvu.edu/templates/showETD.cfm?recnum=1787.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains xi, 108 p. : ill. (some col.) + appendix; 37 p. : ill. Includes abstract. Includes bibliographical references (p. 103-108; p. A-37).
Weber, Sofie Aimee. "Contaminant transport and mass transfer to runoff including infiltration." Thesis, The University of Arizona, 1997. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu_etd_hy0151_sip1_w.pdf&type=application/pdf.
Повний текст джерелаSemkiv, O. "Blockbuster films as an effecnive source of environmental information." Thesis, Вид-во СумДУ, 2005. http://essuir.sumdu.edu.ua/handle/123456789/13557.
Повний текст джерелаRodgers, Joseph J. "Radiochromic film dosimetry system for endovascular brachytherapy source calibration : a method and its uncertainties." Thesis, Georgia Institute of Technology, 1996. http://hdl.handle.net/1853/16468.
Повний текст джерелаBeach, Andrew. "Design and Control of an Atmospheric Pressure Theta-Pinch Imploding Thin-Film Plasma Source." Thesis, Southern Illinois University at Edwardsville, 2016. http://pqdtopen.proquest.com/#viewpdf?dispub=1606630.
Повний текст джерелаAn atmospheric pressure Theta-pinch imploding thin-film device has been developed for use as a plasma source in conjunction with established emission devices for direct atomic spectroscopy. With high energy breakdown capabilities Theta-pinch sources show promise in the breakdown of highly sturdy samples, such as ore and refractory samples. In order to control the large electrical discharge the Theta-pinch requires, a TTL logic circuit was implemented. This allows for temporal control, and along with physical measures, increased safety in operation.
Tebby, Zoé. "Cellules solaires hybrides organiques-inorganiques sur support souple." Thesis, Bordeaux 1, 2008. http://www.theses.fr/2008BOR13639/document.
Повний текст джерелаThis work aimed to develop dye-sensitized solar cells on plastic substrates. In this context, a new low-temperature method to make nanoporous oxide layers based on ultraviolet irradiation under air was studied. First of all, titanium dioxide layers were prepared with this method; the films obtained were composed of a mesoporous network of interconnected anatase titanium dioxide nanoparticles as evidenced by scanning electron microscopy, X-ray diffraction, nitrogen sorption and mercury porosimetries, and thermogravimetric analysis. After sensitizing the films with a ruthenium polypyridyl complex, the photovoltaic cells based on the films in contact with a liquid electrolyte gave conversion efficiencies between 1.6 and 2.5% depending on the nature of the particles used. This low-temperature method based on ultraviolet irradiation was then expanded to other oxides, such as zinc oxide and tin dioxide, as well as to core-shell structures. The conversion efficiencies obtained with tin dioxide were very high, i.e. 1.5 to 1.8%, compared to those usually reported in the literature for films sintered at high temperatures. The higher efficiencies obtained for the UV-treated films were related to higher open circuit potentials and higher fill factors. Therefore, the physical phenomena involved were investigated with various techniques; in particular, electrochemical impedance spectroscopy and open circuit voltage decay. Finally, the electrochromic performances of the low-temperature UV-processed nanoparticulate titanium dioxide films were studied on glass and plastic substrates with an ionic liquid. The coloration efficiencies were found to be comparable to those of high-temperature processed layers
Boubrik, Brahim. "Contribution à l'étude vibratoire des textiles linéaires souples." Mulhouse, 1992. http://www.theses.fr/1992MULH0217.
Повний текст джерелаDinh, Thi hong nhung. "Etudes technologiques de composants PDMS pour applications biomédicales : développement de capteurs souples de pression par transfert de film." Thesis, Université Paris-Saclay (ComUE), 2015. http://www.theses.fr/2015SACLS127/document.
Повний текст джерелаThis thesis focuses on the development of methodologies dedicated to the development of PDMS-based devices, which are required in medical applications. Two objective applications are considered in this work: i) the development of wearable flexible micro-sensors arrays for measuring pressure fields on human body and ii) the development of a reversible bonding technique of PDMS components dedicated to microfluidic chips. In this work, the mechanical properties of PDMS are determined using experiments and computations; they allow identifying the essential elements of the design of capacitive micro-sensors. The manufacturing process is reliable and reproducible, and different types of flexible pressure sensor have been fabricated by a film transfer process. Electromechanical characterizations show that the fabricated sensors are fully operational and suitable for the intended applications. Normal pressure sensors have a capacitance change ranging from 3 to 17% under a 10 N - 300 kPa - load, which is suitable for dental applications. Fabricated triaxial sensor arrays have a spatial resolution of 25 mm2, and a sensitivity of 4% under 3 N load in compression, and 1.4% / N under shear. These features are suitable for plantar pressure measurements required in gait analyses or for the detection of over-pressures. Besides, two different process methods for the reversible bonding of PDMS devices are developed. The microfluidic devices fabrcitated with these methods can be used within up to 5 “bonding & peeling off” cycles, and can be working at high microfluidic flows (500 µL / min, corresponding to a pressure of 148 kPa). The methodologies developed in these works open the way to the design and fabrication of PDMS-based devices suitable for demanding biomedical applications
Ben, Cheikh Ilhem. "Etude expérimentale et investigation numérique de la multi-fissuration des films minces déposés sur un substrat souple." Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAI006/document.
Повний текст джерелаSemiconductor coatings deposited on flexible substrates are used in various high-tech applications, for example flexible micro-electronic components or flexible sollar cells.When submitted to large tensile strains, these coatings undergo damage characterized by the appearance of multiple cracks on their surface with or without delamination at the film/substrate interface.At the end of the multi-cracking process, a characteristic distance between cracks can be measured.This distance depends mainly on the thickness of the film and the mechanical behavior of the substrate.In this project, an experimental study on oxide layers and oxide and silver multilayers of different thicknesses deposited on two polymer substrates was carried out.Were able to determine the mechanical behavior of each substrate and to identify the stages of the three stades of multi-cracking of thin layers.A first stade of random appearance of cracks, a second stade of regular cracking and a last stade of saturation of the network of cracks were identified.The influence of the thickness of the silver layer has also been studied.We have developed a 2D based mechanical model using cohesive zones to simulate the initiation and propagation of cracks in the film.Using this model, we successfully simulate the three stages of the multi-cracking of oxide monolayers deposited on polymer as observed experimentally.We then reduced the model to a representative cell allowing only the last two stages of multi-cracking to be modeled. This cell allowed us to identify the influence of the geometric and mechanical properties of the thin layers and their substrate on the distance between cracks to saturation.The influence of interfacial delamination has also been studied
CALDIROLA, STEFANO. "Characterization of a supersonic plasma source for nanostructured thin films deposition." Doctoral thesis, Università degli Studi di Milano-Bicocca, 2015. http://hdl.handle.net/10281/94564.
Повний текст джерелаScarcella, Meredith Lyn. "Verification of TLD/MCNP depth-dose distribution of a ¹²³Pd IVBT source using radiochromic film." Thesis, Georgia Institute of Technology, 2001. http://hdl.handle.net/1853/17937.
Повний текст джерелаLey, Paul J. "An in-vitro comparison of working length determination between a digital system and conventional film when source-film/sensor distance and exposure time are modified." Connect to resource online, 2009. http://hdl.handle.net/1805/1928.
Повний текст джерелаTitle from PDF t.p. (viewed Aug. 11, 2009) Advisors: Mychel Vail, Chair of the Research Committee, Susan Zunt, Ted Parks, Kenneth Sponik, Joseph Legan. Curriculum vitae. Includes abstract. Includes bibliographical references (leaves 103-119).
Bergeron, Cyril. "Optimisation conjointe source/canal d'une transmission vidéo H. 264/AVC sur lien sans fil." Paris, ENST, 2007. https://pastel.hal.science/pastel-00004234.
Повний текст джерелаWilkie, Sonia. "The effect of audio cues and sound source stimuli on looming perception." Thesis, Queen Mary, University of London, 2015. http://qmro.qmul.ac.uk/xmlui/handle/123456789/8974.
Повний текст джерелаSojoudi, Hossein. "The synthesis, doping, and characterization of graphene films." Diss., Georgia Institute of Technology, 2012. http://hdl.handle.net/1853/50125.
Повний текст джерелаMoore, Keara Bevin. "Nitrate source history for Livermore, California using environmental isotopes, noble-gases, and major ions." Thesis, The University of Arizona, 2004. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu_etd_hy0118_sip1_w.pdf&type=application/pdf.
Повний текст джерелаPearce, Amber Marie. "Synthesis and characterisation of metal chalcogenide thin films." Thesis, University of Manchester, 2014. https://www.research.manchester.ac.uk/portal/en/theses/synthesis-and-characterisation-of-metal-chalcogenide-thin-films(7a22c662-639c-4aaf-a4cc-f2ae655115c0).html.
Повний текст джерелаパスクワ, ロメーロ カミール フェイス, and Camille Faith Pascua Romero. "Development of an electron cyclotron resonance plasma source with an internal antenna for carbon film deposition." Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13071665/?lang=0, 2018. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB13071665/?lang=0.
Повний текст джерела博士(工学)
Doctor of Philosophy in Engineering
同志社大学
Doshisha University
Rubiano, Rodrigo R. (Rubiano Ray). "Low temperature deposition of metal carbide films from single source precursors." Thesis, Massachusetts Institute of Technology, 1994. http://hdl.handle.net/1721.1/34692.
Повний текст джерелаIncludes bibliographical references (leaves 71-73).
by Rodrigo R. Rubiano.
B.S.
M.S.
Srđan, Radaković. "Анимирани филмови произведени у „Неопланта филму“ (1966-1985)". Phd thesis, Univerzitet u Novom Sadu, Akademija umetnosti u Novom Sadu, 2015. http://www.cris.uns.ac.rs/record.jsf?recordId=94952&source=NDLTD&language=en.
Повний текст джерелаThis study elaborates the overall animated filmproduction of Neoplanta Film in Novi Sad, Serbiabetween 1966 and 1985.
Eernstman, Natalia. "Art as a source of learning for sustainable development : making meaning, multiple knowledges and navigating open-endedness." Thesis, University of the Arts London, 2016. http://ualresearchonline.arts.ac.uk/9197/.
Повний текст джерелаLe, Druillennec Marie. "Etude des mécanismes d'endommagement de films minces métalliques déposés sur substrats souples pour l'électronique flexible." Thesis, Université Grenoble Alpes (ComUE), 2017. http://www.theses.fr/2017GREAI108/document.
Повний текст джерелаOver the past 20 years, new improvements in materials and processes led to the development of printed flexible electronics. Flexible electronics devices subjected to bending, twisting, or stretching during their lifetime, the development of device with high reliability is therefore of great importance for the efficiency of electrical connection. This work investigates the mechanical reliability of inkjet or screen-printed Ag thin films on polyimide substrates dedicated to the electrical interconnection of active components. Expected mechanical failure modes are film cracking and buckling delamination.First of all, in order to characterized the two mechanisms, tensile tests are performed under an optical microscope to follow cracks and under an optical interferometer to follow buckles. In order to obtain crack spacing evolution during deformation, an image processing is realized. Two types of cracks are observed: long and straight cracking for thick films and small and zigzag shape cracking for thin films. The evolution of buckles shape with imposed tensile deformation is characterized.In a second time, in order to understand experimental observations, mechanical failure modes are analysed with finite elements models. The origin of the two types of cracking are explained by a geometrical effect of film thickness. A elastoplastic shear lag bidimensional model gives upper and lower bonds of crack spacing during deformation. A three-dimensional model allows identification of cohesive zone model parameters at film/substrate interface, from experimental buckle shape. An adhesion energy of 2 J.m-2 , a critical strength of 20 MPa and a mode mixity parameter of 0.4 are determined. These values are in good agreement with literature
Burton-Taylor, Sarah. "The management of firm specific resources as a source of competitive advantage." Thesis, Cranfield University, 2004. http://hdl.handle.net/1826/123.
Повний текст джерелаCross, Warren Bradley. "Chemical vapour deposition of tunsten oxide thin films from single-source precursors." Thesis, University College London (University of London), 2003. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.406141.
Повний текст джерелаAl-Dulaimi, Naktal. "Rhenium disulfide and rhenium-doped MoS2 thin films from single source precursors." Thesis, University of Manchester, 2018. https://www.research.manchester.ac.uk/portal/en/theses/rhenium-disulfide-and-rheniumdoped-mos2-thin-films-from-single-source-precursors(16f715f7-392a-43f5-b201-64106517d319).html.
Повний текст джерелаBarra-Pantoja, Luis Fernando. "APPLICATIONS OF THE RE-OS ISOTOPIC SYSTEM IN THE STUDY OF MINERAL DEPOSITS: GEOCHRONOLOGY AND SOURCE OF METALS." Diss., Tucson, Arizona : University of Arizona, 2005. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu%5Fetd%5F1055%5F1%5Fm.pdf&type=application/pdf.
Повний текст джерелаKing, Adam. "Constructing a low-cost, open-source, VoiceXML." Thesis, Rhodes University, 2007. http://hdl.handle.net/10962/d1004735.
Повний текст джерелаKMBT_363
Adobe Acrobat 9.55 Paper Capture Plug-in
Steinlein, Almut. "Une esthétique de l'authentique : les films de la Nouvelle Vague." Paris 3, 2005. http://www.theses.fr/2005PA030146.
Повний текст джерелаThe question of authenticity is essential to the self-conception of the New Wave that emerged at the end of the 1950s in France and announced the modern age of cinema. Authenticity is the central notion of modern literature as a means of individual expression. Since the 19th century, a literary work of art founded its legitimisation no more in an external authority, but in its aesthetic originality and autonomy in opposition to classical norms and rhetorical conventions. Instituting the director as the filmic author, the discursive strategy of New Wave's Politique des auteurs must be considered as an attempt to qualify cinema as a modern art by setting the prerequisites for an authentic writing in film. Following Pierre Bourdieu's field theory, the emerging of the New Wave is described as the birth of a field of pure production, modelled on the autonomisation of the literary field in the 19th century. The second part of the study questions the realisation of the authenticity postulate by analysing the first features of Rohmer, Chabrol, Truffaut, Godard and Rivette. If the pretension of authenticity is common to all of the young film makers, they use different authentication strategies in their films, creating in that way both the coherence and the diversity of the New Wave
Fox, Brandy R. 1981. "Investigations into the Oxidative Desulfurization Activity in a Film-Shear Reactor, the Source of Enhanced Reactivity, and Other Potential Applications." Thesis, University of Oregon, 2011. http://hdl.handle.net/1794/11529.
Повний текст джерелаFuel purification is an extremely active area of research in today's green world. Specifically, desulfurization of fuels is an important area of research for two reasons. First, any sulfur present in fuels generates SOx pollutants that are hazardous to human health and also contribute to acid rain. Secondly, even trace sulfur contaminants prohibit the use of fuel streams in fuel cells. However, achieving near-zero sulfur levels with existing technology is impractical. The work in this thesis investigates a new process for the removal of sulfur from fuel streams using a film-shear reactor (based on a process known as oxidative desulfurization), and goes on to investigate the mode of activation for the process within the reactor through a study of the reactor conditions. Additionally, other applications of the film-shear reactor, including mechanical activation of molecules and controlled nanoparticle synthesis are explored. Chapter I outlines the current status of oxidative desulfurization research, highlighting the strengths of the method, innovative approaches and drawbacks to the various approaches. Chapters II and III go on to discuss the enhancement of the process in the film-shear reactor using model fuels and a variety of substrates. This method was found to significantly enhance the oxidative desulfurization process, reducing both the time and temperature required to achieve considerable sulfur removal. Levels of desulfurization that require hours at elevated temperatures by conventional stirring methods were obtainable on the scale of seconds at or below room temperature. Chapter IV offers investigations into the conditions within the film-shear reactor, and also presents studies of the ability of the high shear rates obtained in the reactor to mechanically activate molecules. Chapter V extends the applicability of the film-shear reactor to nanoparticle synthesis through investigation of two titania synthesis methods utilizing the film-shear reactor. Appendices A and B offer supplementary information to enhance the studies presented in Chapters II and III, while Appendices C, D, and E highlight work done investigating the ability of platinum complexes to hydrate nitriles and cyanohydrins. This dissertation includes previously published and unpublished co-authored material.
Committee in charge: Victoria J. DeRose, Chairperson; David R. Tyler, Advisor; Kenneth M. Doxsee, Member; Catherine J. Page, Member; Mark H. Reed, Outside Member
Hill, Matthew Roland Chemistry Faculty of Science UNSW. "The single source chemical vapour deposition of alkaline earth metal oxide thin films." Awarded by:University of New South Wales. School of Chemistry, 2006. http://handle.unsw.edu.au/1959.4/32903.
Повний текст джерелаWohlgezogen, Franz. "The Ivory Tower and the Bazaar Knowledge sharing and knowledge creation in higher education through open source communities /." St. Gallen, 2006. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/04609103001/$FILE/04609103001.pdf.
Повний текст джерелаRussi, Cornel. "Consumer Generated Advertising Risiken und Potentiale dieser innovativen Werbemethode /." St. Gallen, 2008. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/05603535001/$FILE/05603535001.pdf.
Повний текст джерелаHitchcock, Jonathan. "Decorating Asterisk : experiments in service creation for a multi-protocol telephony environment using open source tools." Thesis, Rhodes University, 2006. http://hdl.handle.net/10962/d1006539.
Повний текст джерелаMatthies, Holger. "Übertragung von Elementen der Open-Source-Softwareentwicklung auf Outside-In-Innovationen." St. Gallen, 2004. http://www.biblio.unisg.ch/org/biblio/edoc.nsf/wwwDisplayIdentifier/01652379001/$FILE/01652379001.pdf.
Повний текст джерела