Дисертації з теми "Film plastic"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Film plastic".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Marsh, Richard. "Plastic film recycling from waste sources." Thesis, Cardiff University, 2005. http://orca.cf.ac.uk/56031/.
Повний текст джерелаStrater, Kurt F. "Countercurrent cooling of blown film." Thesis, McGill University, 1985. http://digitool.Library.McGill.CA:80/R/?func=dbin-jump-full&object_id=66003.
Повний текст джерелаChang, Q. "Colorimetric and fluorimetric plastic film sensors for carbon dioxide." Thesis, Swansea University, 1993. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.636226.
Повний текст джерелаBas, Derek. "Laser Beam Steering with Thin Film GaAs on Plastic." Bowling Green State University / OhioLINK, 2010. http://rave.ohiolink.edu/etdc/view?acc_num=bgsu1277119321.
Повний текст джерелаWentzel, John P. "An investigation into surface effects in thin film plastic scintillators." Master's thesis, University of Cape Town, 1992. http://hdl.handle.net/11427/18348.
Повний текст джерелаLin, Qian. "A Plastic-Based Thick-Film Li-Ion Microbattery for Autonomous Microsensors." Diss., CLICK HERE for online access, 2006. http://contentdm.lib.byu.edu/ETD/image/etd1175.pdf.
Повний текст джерелаHur, Sung-ho. "Model based cross-directional monitoring and control of plastic film thickness." Thesis, University of Strathclyde, 2010. http://oleg.lib.strath.ac.uk:80/R/?func=dbin-jump-full&object_id=25796.
Повний текст джерелаKhatami, Hassan. "Influence of titanium dioxide pigments on the thermal and photochemical oxidation of low density polyethylene film." Thesis, Manchester Metropolitan University, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.283081.
Повний текст джерелаBastarrachea, Gutiérrez Luis Javier. "Biodegradable poly(butylene adipate-co-terephtalate) film incorporated with nisin characterization, effectiveness against Listeria innocua, and nisin release kinetics /." Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Thesis/Spring2010/l_bastarrachea_031010.pdf.
Повний текст джерелаTitle from PDF title page (viewed on June 14, 2010). "Department of Biological Systems Engineering." Includes bibliographical references.
Butterfield, Craig. "A novel laboratory dispersive and distributive minimixer and applications : development of a new minimixer that can duplicate mixing which occurs in a large twin screw extruder." Thesis, University of Bradford, 2009. http://hdl.handle.net/10454/4930.
Повний текст джерелаJabalameli, Morteza. "The Effect of Black Plastic Mulch Alone and in Combination with Various Types of Plastic Row Covers on Production of Sweet Corn." DigitalCommons@USU, 1992. https://digitalcommons.usu.edu/etd/6938.
Повний текст джерелаMohammad, Davoudi Kamyar. "Plastic Behavior of Polycrytalline Thin Films: Discrete Dislocation Study." Thesis, Harvard University, 2014. http://dissertations.umi.com/gsas.harvard:11634.
Повний текст джерелаEngineering and Applied Sciences
Dale, Jon. "Fragmentation in the plastic pulse : the "underground film" of Ken Jacobs and Jack Smith /." Title page, contents and introduction only, 2001. http://web4.library.adelaide.edu.au/theses/09AR/09ard139.pdf.
Повний текст джерелаWu, Chuanbin. "Influence of non-traditional plasticizers and enteric polymers on the physicochemical and mechanical properties of polymeric films and film coated solid substrates /." Digital version accessible at:, 1999. http://wwwlib.umi.com/cr/utexas/main.
Повний текст джерелаТищенко, Костянтин Володимирович, Константин Владимирович Тищенко, Kostiantyn Volodymyrovych Tyshchenko, Ірина Михайлівна Пазуха, Ирина Михайловна Пазуха, Iryna Mykhailivna Pazukha, Наталія Іванівна Шумакова, Наталия Ивановна Шумакова, and Nataliia Ivanivna Shumakova. "Strain Properties of Nanodimentional Film Systems Based on Fe and Pt." Thesis, Sumy State University, 2013. http://essuir.sumdu.edu.ua/handle/123456789/35200.
Повний текст джерелаCrowley, Kathryn Jane. "Effects of colored plastic film on several field grown and greenhouse grown cut flower species." Auburn, Ala., 2007. http://repo.lib.auburn.edu/2007%20Fall%20Theses/Crowley_Kathryn_6.pdf.
Повний текст джерелаOkoronkwo, U. J. "Plasticulture." Thesis, Sumy State University, 2014. http://essuir.sumdu.edu.ua/handle/123456789/36216.
Повний текст джерелаКоротка, Валерія Олександрівна. "Екструзійний агрегат з модернізацією черв‘яка". Bachelor's thesis, КПІ ім. Ігоря Сікорського, 2021. https://ela.kpi.ua/handle/123456789/41797.
Повний текст джерелаThe purpose of development and design is analytical, design calculations using known methods, regulations, computer programs. The design and development of the extrusion unit is performed on the basis of patent research, study of scientific and technical literature, engineering and technical calculations and analytical review. The following was done: -engineered calculations for the design and development of eestruder, in accordance with the terms of reference; - the principle of operation of the extrusion unit for film plastic was studied, technical parameters and characteristics were analyzed; - on the basis of patent research the worm of the extrusion unit is modernized; - developed and designed an extrusion unit with an upgraded worm for film plastic;
Макуха, Зінаїда Миколаївна, Зинаида Николаевна Макуха, Zinaida Mykolaivna Makukha, Юрій Михайлович Шабельник, Юрий Михайлович Шабельник, Yurii Mykhailovych Shabelnyk, Ірина Михайлівна Пазуха, et al. "Strain Properties of Nanodimentional Thin Film Systems Based on Ag and Co." Thesis, Sumy State University, 2012. http://essuir.sumdu.edu.ua/handle/123456789/34874.
Повний текст джерелаBorgemenke, Joshua P. "Development of Efficiently Produced, Renewable Polycarbonates from Fatty Acids, CO2, and Propylene Oxide for Plastic Film Applications." The Ohio State University, 2017. http://rave.ohiolink.edu/etdc/view?acc_num=osu1511785564232497.
Повний текст джерелаAl-Ati, Tareq. "Oxygen permeation of virgin HDPE films versus recycled HDPE films /." Online version of thesis, 1994. http://hdl.handle.net/1850/11875.
Повний текст джерелаMourao, Isabel de Maria Cardoso Gonsalves. "Analysis of broccoli (Brassica oleracea L. var. italica) growth and development in response to microclimate under direct plastic film crop covers." Thesis, University of Reading, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.262637.
Повний текст джерелаPorto, Karina Meschini Batista Geribello. "Efeitos da radiação gama (cobalto-60) nas principais propriedades físicas e químicas de embalagens compostas por papel grau cirúrgico e filme plástico laminado, destinada à esterilização de produtos para saúde." Universidade de São Paulo, 2013. http://www.teses.usp.br/teses/disponiveis/85/85131/tde-26112013-102247/.
Повний текст джерелаGamma radiation is one of the technologies applied for the sterilization of packaging systems containing products for health. During sterilization process it is critical that the properties of packages are maintained. In this study two samples of commercial pouch packaging comprised of surgical grade paper on one side and the other side multilayer plastic film were irradiated with gamma rays. The following doses were applied 25 kGy (1,57 kGy/h) and 50 kGy (1,48 kGy/h). One packaging sample was paper formed by softwood fibers and multilayer plastic film based on poly(ethylene terephthalate) (PET)/polyethylene (PE). The second type of paper sample was made by a mixture of softwood and hardwood fibers and multilayer plastic film based on polyethylene terephthalate (ethylene) (PET)/polypropylene (PP). The effects of radiation on the physical and chemical properties of papers and multilayer plastic films, as well as the properties of the package were studied. The paper was the more radiation sensitive among the studied materials and radiation effects were more pronounced at brightness, pH, tearing resistance, bursting strength and tensile strength. Nonetheless, worst comparatively effects were noted on the sample made by a mixture of softwood and hardwood fibers. The porosity of paper was enhanced by 50 kGy. In the case of plastic films, radiation effects on tensile strength was the most pronounced property for both samples. In the case of the packaging the sealing resistance decreased with radiation. The effects observed for the treatment at 50 kGy were more pronounced when compared to 25 kGy. This last is the dose which is usually applied to sterilize health products. A dosimetry study was performed during irradiation at 25 kGy, 40 kGy and 50 kGy and its importance may be reported by the average dose variation 20 %.
Kim, Namsu. "Fabrication and characterization of thin-film encapsulation for organic electronics." Diss., Atlanta, Ga. : Georgia Institute of Technology, 2009. http://hdl.handle.net/1853/31772.
Повний текст джерелаCommittee Chair: Samuel Graham; Committee Member: Bernard Kippelen; Committee Member: David McDowell; Committee Member: Sankar Nair; Committee Member: Suresh Sitaraman. Part of the SMARTech Electronic Thesis and Dissertation Collection.
Basso, Fernanda Carvalho [UNESP]. "Estabilidade aeróbia de silagens de planta e de grãos úmidos de milho." Universidade Estadual Paulista (UNESP), 2010. http://hdl.handle.net/11449/92406.
Повний текст джерелаConselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)
Objetivou-se avaliar a estabilidade aeróbia de silagens de planta e de grãos úmidos de milho com a utilização de inoculante microbiano, bem como o uso de filme plástico de baixa permeabilidade ao oxigênio associado ao filme convencional. Para tanto foram conduzidos três experimentos. No primeiro e segundo experimentos os objetivos foram avaliar os efeitos de doses de Lactobacillus buchneri (5x104, 1x105, 5x105 e 1x106 UFC/ g) sobre as características fermentativas, a dinâmica microbiológica, a estabilidade aeróbia e o valor nutricional de silagens de planta e de grãos úmidos de milho. No terceiro experimento, objetivou-se avaliar o efeito do filme plástico de baixa permeabilidade ao oxigênio associado ao filme convencional sobre a perdas na armazenagem e a estabilidade aeróbia de silagem de planta de milho, em silo tipo superfície. O L. buchneri é eficiente no controle de leveduras e fungos filamentosos, assim como melhora a estabilidade aeróbia da silagem de planta e de grãos úmidos de milho e não afeta o valor nutricional. O filme de baixa permeabilidade ao oxigênio associado ao filme convencional é eficiente na manutenção das características fermentativas, no controle da população de leveduras e na redução de perdas, principalmente quando a fatia de retirada é menor
Aimed to evaluate the aerobic stability of plant and of high moisture corn silage with the use of microbial inoculant and oxygen barrier film associated with conventional film. Therefore, three experiments were conducted. In the first and second experiments the objectives were to evaluate the effects of Lactobacillus buchneri doses (5x104, 1x105, 5x105 and 1x106 CFU/g) on the fermentation characteristics, microbial dynamics, aerobic stability and nutritional value of plant and of grain moisture corn silage. The third experiment aimed to evaluate the effect of oxygen barrier film associated with conventional film under the storage losses and aerobic stability of plant corn silage in a horizontal silo. The L. buchneri is effective in control of yeasts and molds, and improve the aerobic stability of plant and of high moisture corn silage and do not affect nutritional value. The oxygen barrier film is effective in maintaining the fermentation characteristics, in yeasts population control and loss reduction, mainly when the feedout rate is lower
Basso, Fernanda Carvalho. "Estabilidade aeróbia de silagens de planta e de grãos úmidos de milho /." Jaboticabal : [s.n.], 2010. http://hdl.handle.net/11449/92406.
Повний текст джерелаAbstract: Aimed to evaluate the aerobic stability of plant and of high moisture corn silage with the use of microbial inoculant and oxygen barrier film associated with conventional film. Therefore, three experiments were conducted. In the first and second experiments the objectives were to evaluate the effects of Lactobacillus buchneri doses (5x104, 1x105, 5x105 and 1x106 CFU/g) on the fermentation characteristics, microbial dynamics, aerobic stability and nutritional value of plant and of grain moisture corn silage. The third experiment aimed to evaluate the effect of oxygen barrier film associated with conventional film under the storage losses and aerobic stability of plant corn silage in a horizontal silo. The L. buchneri is effective in control of yeasts and molds, and improve the aerobic stability of plant and of high moisture corn silage and do not affect nutritional value. The oxygen barrier film is effective in maintaining the fermentation characteristics, in yeasts population control and loss reduction, mainly when the feedout rate is lower
Orientador: Ricardo Andrade Reis
Coorientador: Thiago Fernandes Bernardes
Coorientador: Ana Claudia Ruggieri
Banca: Clóves Cabreira Jobim
Banca: Antonio Fernando Bergamaschine
Mestre
Bodalia, Raj. "An investigation of the "walking" behavior in the manufacturing of biaxially oriented polypropylene films /." Online version of thesis, 1988. http://hdl.handle.net/1850/10691.
Повний текст джерелаAw, Cheong Soon (Samuel). "A study to evaluate the permeation characteristics of black tea flavors and linalool in four different plastic films /." Online version of thesis, 1995. http://hdl.handle.net/1850/11853.
Повний текст джерелаNath, Caroline Daiane. "Caracterização microbiológica, fermentativa e estabilidade aeróbia em silagens pré-secadas de capim Tifton 85, com diferentes camadas de filme de polietileno e tempos de armazenamento." Universidade Estadual do Oeste do Paraná, 2016. http://tede.unioeste.br:8080/tede/handle/tede/1585.
Повний текст джерелаConselho Nacional de Desenvolvimento Científico e Tecnológico
This work aimed to evaluate the microbiological and fermentative profile, aerobic stability and variation of the external temperature in silo bags with pre-dried silage of Tifton 85 grass, with different layers of polyethylene film and storage times. The trial design was completely randomized with a split plot in the weather, with 4 replications. In the main plot were allocated the treatments (2 and 3 layers of involvement) and the subplots the sampling times, 3 times (30, 60 and 90 days of storage) for microbiological and fermentative evaluation and water activity (Aw) and 5 times (0, 1, 2, 3 and 4 days of aerobic exposure) for aerobic stability evaluation. For the study of the external temperature variation in silos during storage, the treatment allocated in the plots were constituted by evaluation strata (surface, middle and silo base) and the subplots, the evaluation times (0, 7, 14, 21, 28, 35, 42, 49, 56, 63, 70, 77 and 84 days of storage). Silos of 400 kg have been made, with the use of inoculant in the baling and these ones stored in the weather, and after their opening were placed in a covered shed. In the microbiological profile, after the silage s opening, it was quantified by culturing, the population of Clostridium, Bacillus, enterobacteriaceae, lactic acid bacteria, Listeria sp., Salmonella sp., yeasts and fungi. The aerobic stability was evaluated from its opening to the fourth day of exposure of the silage to the oxygen. The pH and the levels of soluble carbohydrates and ammonia nitrogen (NH3/ N total) were evaluated after the silage s opening. The evaluation of temperature in the silo strata (surface, middle and base) was performed weekly during the silage s storage, with the aid of an infrared thermometer with laser sight. It was found that the storage time and the number of layers of polyethylene film has not reflected in changes in the Clostridium population, lactic acid bacteria and Aw. values. There was a decrease in the population of enterobacteria with the increasing of storage period in both treatments. The Bacillus population was lower in silages made with three layers of involvement (3.63 log CFU g-1), 30 days of opening. There was no growth of Listeria sp. and Salmonella sp. during the silage storage period. The fungus genre of greater occurrence in silage pre-dried of Tifton 85 grass was the Penicillium. There was no breach of aerobic stability during periods of evaluation due to the high temperatures of silage, which are above ambient temperature. The pH was greater than recommended for good silage preservation (4.2) in the opening and during exposure to oxygen. It was found that the content of ammonia nitrogen and soluble carbohydrates in the silages with two layers differ between the storage times. There was alteration in temperature in the different strata of evaluation in silos with two layers of involvement at 0, 7, 14, 21, 28, 35 and 42 days and the silos with three layers of involvement at 0, 7, 14, 21 and 35 days of storage. The temperature at the base and in the middle of the silos with two and three layers of involvement at 0, 7, 14, 21, 28, 35, 42, 49, 63 and 84 days of ensiling exceeded the values of the ambient temperature, characterizing the heating of the silage during storage. The pre-dried silage of Tifton 85 grass wrapped with two and three layers of polyethylene film had their aerobic stability and fermentation profile damaged during storage and shortages of silos, therefore the silage obtained cannot be considered of good quality
O presente trabalho teve como objetivo avaliar o perfil microbiológico, fermentativo, a estabilidade aeróbia e a variação da temperatura externa em silos bags com silagens pré-secadas de capim Tifton 85, com diferentes camadas de filme de polietileno e tempos de armazenamento. O delineamento experimental foi inteiramente casualizado com parcelas subdivididas no tempo, com 4 repetições. Nas parcelas principais foram alocados os tratamentos (2 e 3 camadas de envelopamento) e nas subparcelas os tempos de amostragem, sendo 3 tempos (30, 60 e 90 dias de armazenamento) para avaliação microbiológica, fermentativa e da atividade de água (Aw) e 5 tempos (0, 1, 2, 3 e 4 dias de exposição aeróbia) para avaliação da estabilidade aeróbia. Para estudo da variação de temperatura externa nos silos durante o armazenamento, os tratamentos alocados nas parcelas foram constituídos pelos estratos de avaliação (superfície, meio e base do silo) e as subparcelas, os tempos de avaliação (0, 7, 14, 21, 28, 35, 42, 49, 56, 63, 70, 77 e 84 dias de armazenamento). Foram confeccionados silos de 400 kg cada, com uso de inoculante no enfardamento, e estes armazenados no tempo, sendo após sua abertura, acondicionados em galpão coberto. No perfil microbiológico após abertura da silagem, foi quantificado por meio de cultura a população de Clostridium, Bacillus, enterobactérias, bactérias ácido lácticas, Listeria sp., Salmonella sp., leveduras e fungos. A estabilidade aeróbia foi avaliada da abertura ao quarto dia de exposição da silagem ao oxigênio. O pH e os teores de carboidratos solúveis e nitrogênio amoniacal (NH3/N total), foram avaliados após abertura da silagem. A avaliação da temperatura nos estratos (superfície, meio e base) dos silos foi realizada semanalmente durante o armazenamento da silagem, com auxílio de um termômetro de infravermelho com mira laser. Verificou-se que o tempo de armazenamento e o número de camadas de filme de polietileno não refletiram em alterações na população de Clostridium, bactérias ácido lácticas e nos valores de Aw. Houve uma diminuição na população de enterobactérias com o aumento do período de armazenamento em ambos os tratamentos. A população de Bacillus foi menor em silagens confeccionadas com três camadas de envelopamento (3,63 log UFC g-1), aos 30 dias de abertura. Não houve crescimento de Listeria sp. e Salmonella sp. durante o período de armazenamento das silagens. O gênero de fungo de maior ocorrência em silagens pré-secadas de capim Tifton 85 foi o Penicillium. Não houve quebra de estabilidade aeróbia durante os períodos avaliados, em função das elevadas temperaturas das silagens, sendo estas superiores a temperatura ambiente. O pH ficou superior ao preconizado para uma boa conservação da silagem (4,2) na abertura e durante a exposição ao oxigênio. Verificou-se que os teores de nitrogênio amoniacal e de carboidratos solúveis nas silagens com duas camadas diferiram entre os tempos de armazenamento. Houve alteração da temperatura nos diferentes estratos de avaliação nos silos com duas camadas de envelopamento aos 0, 7, 14, 21, 28, 35 e 42 dias e nos silos com três camadas de envelopamento aos 0, 7, 14, 21 e 35 dias de armazenamento. A temperatura na base e no meio dos silos com duas e três camadas de envelopamento aos 0, 7, 14, 21, 28, 35, 42, 49, 63 e 84 dias de ensilagem superaram os valores da temperatura ambiente, caracterizando o aquecimento da silagem durante o armazenamento. As silagens pré-secadas de capim Tifton 85 envelopadas com duas e três camadas de filme de polietileno tiveram sua estabilidade aeróbia e perfil fermentativo prejudicados durante o armazenamento e desabastecimento dos silos, portanto as silagens obtidas não podem ser consideradas de boa qualidade
Schönström, Linus, Anna Nordh, Anton Strignert, Frida Lemel, Jakob Ekengard, Sofie Wallin, and Zargham Jabri. "A process recipe for bonding a silicone membrane to a plastic substrate." Thesis, Uppsala universitet, Institutionen för teknikvetenskaper, 2013. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-201008.
Повний текст джерелаBreese, David Ryan. "Transitional Fiber/Non-Fibrous Gel Process-Structure-Property Model for Uniaxially Oriented Polymer Films." University of Cincinnati / OhioLINK, 2009. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1240967856.
Повний текст джерелаVainstein, Jimmy. "A study of the conditions and variables that affect the printing of shrink films on waterbased flexography /." Link to online version, 2005. https://ritdml.rit.edu/dspace/handle/1850/1107.
Повний текст джерелаMoran, Matthew T. "Testing the predictability of water-based flexographic inks on plastic substrates /." Online version of thesis, 1993. http://hdl.handle.net/1850/11271.
Повний текст джерелаЛогвинов, А. М. "Тензорезистивні властивості двошарових плівок Fe/Ag". Thesis, Сумський державний університет, 2015. http://essuir.sumdu.edu.ua/handle/123456789/40868.
Повний текст джерелаHartl, Petr. "Mazaní plastových ozubených soukolí." Master's thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2020. http://www.nusl.cz/ntk/nusl-417769.
Повний текст джерелаCaron, Vanessa Cristina. "Conservação refrigerada de lima ácida \"Tahiti\" em combinação com atmosfera modificada, ácido giberélico e permanganato de potássio." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/11/11136/tde-26022010-080246/.
Повний текст джерелаAlthough Brazil is the largest producer and exporter of \'Tahiti\' lime, actually, exports only 5% of total production. This is, in part, because of a lack of quality of these limes, characterized by loss of green skin colour after harvest. The purpose of this research was to evaluate the efficiency of modified atmosphere, gibberellic acid (GA) and potassium permanganate, alone and combined with each, in the maintenance of green skin \'Tahiti\' limes, processed with wax, fungicide and cold storage. For this, three experiments were carried out. At first, the effect of modified atmosphere was evaluated with the films: LDPE (30 µm), LDPE (65 µm), Vegetable Pack (18 µm), Cryovac D-955 (15 µm) and Xtend (18 µm). In the second, the effect of two doses of GA (20 and 100 mg L-1) alone and combined with two plastic films, selected in experiment 1, was assessed. In the third, the effect of potassium permanganate alone and combined with GA and plastic film, selected in experiment 2, was evaluated. In three experiments, the physico-chemical analysis and the gas composition inside the package for 24 days at 10 ± 1ºC, 6 days at 20 ± 1ºC and 75 ± 5% relative humidity were performed. At the end of the first experiment, the films Vegetable Pack and Cryovac D-955 were selected, because it didnt promote the formation of high levels of ethanol and acetaldehyde and promoted low weight loss. There was greater retention of skin color in the fruits under the LDPE films, but these resulted in drastic modification of the atmosphere, with changes in flavor, the pulp colour and high decay incidence. In the second experiment, the dose of 20 mg L-1 GA was enough to keep the skin colour longer than the fruits without GA. Films Vegetable Pack and Cryovac D-955 resulted in fruit with greater hue angle and lower chroma than fruits without film. The film Cryovac D-955 was selected because it is shrinkable and facilitate the packing process in the packing house. In the third experiment, the potassium permanganate reduced ethylene levels inside the package. The combination of the sachet with plastic film resulted in higher levels of chlorophyll and fruits with a greener. The film Cryovac D-955 retained the fruits with 4% more weight, with greater hue angle, brightness lower and higher chlorophyll content than the fruits without packaging. The levels of ascorbic acid and soluble solids were not affected by treatments in either experiment. Fruits packed in LDPE films, in the first experiment, resulted in lower levels of citric acid, because of the drastic change of the internal atmosphere. In conclusion, the use of film Cryovac D-955 is effective in preserving the green colour of the \'Tahiti\' limes treated with wax, fungicide and storage. Ethylene absorbers enhance the preservation of limes when combined with plastic film. The gibberellic acid is effective in preserving the green colour of limes when applied to fruit with olive brilliant colour.
Овруцький, А. С. "Особливості розмірної залежності інтегрального коефіцієнта поздовжньої тензочутливості плівок сплаву Ni[80]Fe[20]". Thesis, Сумський державний університет, 2017. http://essuir.sumdu.edu.ua/handle/123456789/64714.
Повний текст джерелаSwanson, Duane A. "Determination of the thermal properties of thin polymer films /." Online version of thesis, 1991. http://hdl.handle.net/1850/10789.
Повний текст джерелаChapples, J. "Electrochemical and chemical methods of metallizing plastic films." Thesis, Cranfield University, 1991. http://hdl.handle.net/1826/3240.
Повний текст джерелаLöfgren, Max. "Deep learning for measuring radon on plastic films." Thesis, Uppsala universitet, Signaler och system, 2021. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-441986.
Повний текст джерелаZhang, Ci. "ELECTROMECHANICAL DEFORMATION AND FAILURE OF LAYERED POLYMERIC FILMS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=case1600528144785256.
Повний текст джерелаMilton, A. J. "Structural properties of polyaniline films." Thesis, Durham University, 1993. http://etheses.dur.ac.uk/5548/.
Повний текст джерелаUvieghara, Mathias N. "The Effect of Deborah Number and Aspect Ratio on the Film Casting of LLDPE Melts." Fogler Library, University of Maine, 2004. http://www.library.umaine.edu/theses/pdf/UviegharaMN2004.pdf.
Повний текст джерелаHornung, Christian Harald. "The development of microreactors made from plastic microcapillary films." Thesis, University of Cambridge, 2008. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.612155.
Повний текст джерелаPaolizzi, Simone. "Sulla formatura di film plastico in macchine blisteratrici con infrarossi." Master's thesis, Alma Mater Studiorum - Università di Bologna, 2013. http://amslaurea.unibo.it/6031/.
Повний текст джерелаMokwena, Kereilemang Khanah. "Barrier properties of ethylene vinyl alcohol films in thermal processing." Pullman, Wash. : Washington State University, 2010. http://www.dissertations.wsu.edu/Dissertations/Spring2010/k_mokwena_050310.pdf.
Повний текст джерелаSouza, Claudio Roberto Lima de. "STRUCTURE-PROPERTY RELATIONSHIPS IN HIGH BARRIER MULTILAYER FILM/FOAM SYSTEMS." Case Western Reserve University School of Graduate Studies / OhioLINK, 2020. http://rave.ohiolink.edu/etdc/view?acc_num=case1605692744465504.
Повний текст джерелаChang, Tei-Lin, and 張得霖. "Implementation of Plastic-Film Friction-Coefficient Tester." Thesis, 2013. http://ndltd.ncl.edu.tw/handle/79912609265951211553.
Повний текст джерела國立彰化師範大學
電機工程學系
101
This thesis explains the implementation of Plastic-Film Friction-Coefficient Tester to be applied in the static and kinetic coefficients of plastic film and sheet. Since the instrument, imported from foreign makers, is expensive, the manufacturing or purchasing cost is high for small and medium enterprises. Handheld force gauges are often used instead. However, the measurement data by handheld force gauges are unstable and lack of credibility. To reduce the manufacturing or purchasing cost in industry circles, the major purpose of this research is to ensure the reliability of each measurement by well design and tests conforming to ASTM D1894 and calibrated measuring systems. The key introduction of this thesis emphasizes on the design of the friction test platform mechanism, circuit of load cell amplifier and frequency transducer, and the software. This tester can be easily operated with fully automatic measurement. Values will be calculated automatically after test completion, including coefficient and average coefficient of static friction and kinetic frication, and standard deviation. Main features of the software contain test parameter inputs, real-time friction display, and graphics capability of data recording. The experiment tested 5 groups of PVC film with thickness of 0.18 mm, and the test result shows the standard deviation of both static and kinetic friction coefficient is very low, which is 0.034 and 0.004 respectively. It represents a considerable reliability of this test system, which can be applied to the needs of industries. The whole hardware expenditure is only a sixth of a foreign brand, which greatly reducing enterprises’ manufacturing or purchasing costs.
Fathi, Ehsanollah. "Thin Film Solar Cells on Transparent Plastic Foils." Thesis, 2011. http://hdl.handle.net/10012/5952.
Повний текст джерелаTsay, Chong Ru, and 蔡忠儒. "Study on the Starch Based Biodegradable Plastic Film." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/68775712339596112185.
Повний текст джерела中原大學
化學工程研究所
82
The film cast from a small quantity of poly(vinyl alcohol) having strong film forming property and a large quantity of starch or it''s derivatives under the glycerol plasticizer, are rapid effective biodegradability. And these films are impre- ganated with water resistant resin, because of water soluble film. Poly(vinyl alcohol) filled with starch or it''s derivatives , generally will decrease mechanical properties, and starch graft copolymer affact little than starch. When glycerol is added with an increased quantity, the tensile strength will decrease but elongation increase. In the flexible blend polymer formed under the fixed com- position of poly( vinyl alcohol ) and glycerol, less quantity of filler will decrease mechancial properties and the opposite will increase tensile strength but will continue to decrease elongation. In the same large quantity of total starch, increase starch graft copolymer will decrease tensile strength but will increase elongation. Under the same quantity of filler, when high graft percent one is used,the transparency will be lower, and increase filler will decrease transparency more or less. Impregnated water resistant film, in general, will show a higher transparency. Increasing filler in the fixed composition of poly( vinyl alcohol) and glycerol,will increase water absorption,and lower graft percent one, in general, will show a lower. And in the same large quantity of filler, higher graft percent one will show a lower water absorption.