Добірка наукової літератури з теми "Fibrous clay"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fibrous clay".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Fibrous clay"
Alcântara, Ana C. S., Margarita Darder, Pilar Aranda, and Eduardo Ruiz-Hitzky. "Polysaccharide–fibrous clay bionanocomposites." Applied Clay Science 96 (July 2014): 2–8. http://dx.doi.org/10.1016/j.clay.2014.02.018.
Повний текст джерелаEstu Yulianto, Faisal, Fuad Harwadi, and Rusdiansyahi. "Characteristics of Palangkaraya fibrous peat." MATEC Web of Conferences 276 (2019): 05008. http://dx.doi.org/10.1051/matecconf/201927605008.
Повний текст джерелаTARASENKO, NATALIA, VIKTORIIA PLAVAN, YURII BUDASH та INNA TKACHENKO. "ДОСЛІДЖЕННЯ СОРБЦІЙНИХ ВЛАСТИВОСТЕЙ ВОЛОКНИСТИХ МАТЕРІАЛІВ, МОДИФІКОВАНИХ ГЛИНИСТИМИ МІНЕРАЛАМИ". Technologies and Engineering, № 3 (4 січня 2022): 70–78. http://dx.doi.org/10.30857/2786-5371.2021.3.7.
Повний текст джерелаHurst, A. "Textural and geochemical micro-analysis in the interpretation of clay mineral characteristics: lessons from sandstone hydrocarbon reservoirs." Clay Minerals 34, no. 1 (March 1999): 137–49. http://dx.doi.org/10.1180/000985599545993.
Повний текст джерелаCruz Magalhães, Xavier Katiane, Santos Maria do Socorro Ferreira, Maria Rita de Morais Chaves Santos, Luz Adão Benvindo, Brasileiro Luzana Leite, Carvalho Maria Wilma Nunes Cordeiro, and Edson Cavalcanti Silva Filho. "Thermal Activation of Palygorskite at Different Temperatures." Materials Science Forum 775-776 (January 2014): 47–51. http://dx.doi.org/10.4028/www.scientific.net/msf.775-776.47.
Повний текст джерела., Naoto Yoshida, Tadahumi Naka ., and Kazuyoshi Ohta . "Mutagenesis of Bacteria by Fibrous or Clay Minerals." Journal of Biological Sciences 4, no. 4 (June 15, 2004): 532–36. http://dx.doi.org/10.3923/jbs.2004.532.536.
Повний текст джерелаPozo, Manuel, and José Calvo. "An Overview of Authigenic Magnesian Clays." Minerals 8, no. 11 (November 9, 2018): 520. http://dx.doi.org/10.3390/min8110520.
Повний текст джерелаHelios-Rybicka, E. "Sorption of Ni, Zn and Cd on Sepiolite." Clay Minerals 20, no. 4 (December 1985): 525–27. http://dx.doi.org/10.1180/claymin.1985.020.4.09.
Повний текст джерелаMiranda, Maicon Oliveira, Francisca Pereira de Araújo, Josy Anteveli Osajima, and Edson Cavalcanti Silva Filho. "Incorporation of Zirconium Oxide on the Surface of Palygorskite Clay for Photodegradation of Industrial Dye." Materials Science Forum 869 (August 2016): 768–72. http://dx.doi.org/10.4028/www.scientific.net/msf.869.768.
Повний текст джерелаLa Noce, Michele, Alessandro Lo Faro, and Gaetano Sciuto. "Clay-Based Products Sustainable Development: Some Applications." Sustainability 13, no. 3 (January 28, 2021): 1364. http://dx.doi.org/10.3390/su13031364.
Повний текст джерелаДисертації з теми "Fibrous clay"
Shah, Apoorva P. "Moisture diffusion through vinyl ester/clay nanocomposites." Morgantown, W. Va. : [West Virginia University Libraries], 2001. http://etd.wvu.edu/templates/showETD.cfm?recnum=2189.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains xii, 147 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 97-100).
Qureshi, Muhammad Asif Mahmood. "Glass-fiber reinforced polymer-clay nanocomposites in structural applications." Morgantown, W. Va. : [West Virginia University Libraries], 2009. http://hdl.handle.net/10450/10557.
Повний текст джерелаTitle from document title page. Document formatted into pages; contains xi, 71 p. : ill. (some col.). Includes abstract. Includes bibliographical references (p. 69-71).
Faria, Luiz Affonso Souza [UNESP]. "Síntese, caracterização e estudo do processo de adsorção de filmes de nanocompósitos de PVDF/argila." Universidade Estadual Paulista (UNESP), 2015. http://hdl.handle.net/11449/139493.
Повний текст джерелаApproved for entry into archive by Ana Paula Grisoto (grisotoana@reitoria.unesp.br) on 2016-06-21T16:45:54Z (GMT) No. of bitstreams: 1 faria_las_me_ilha.pdf: 3123195 bytes, checksum: 16931777d473b94f7e8908c291644f6a (MD5)
Made available in DSpace on 2016-06-21T16:45:54Z (GMT). No. of bitstreams: 1 faria_las_me_ilha.pdf: 3123195 bytes, checksum: 16931777d473b94f7e8908c291644f6a (MD5) Previous issue date: 2015-12-18
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Este trabalho consiste na preparação de filmes por meio de soluções contendo poli(fluoreto de vinilideno) – PVDF dissolvido em N, N Dimetilformamida (DMF) e material cerâmico como argila montmorilonita (K10), pelo método de Fiação por Sopro em Solução (FSS). As partículas de argila foram introduzidas como um aditivo para filmes de PVDF. Os filmes obtidos foram caracterizados por Microscopia Eletrônica de Varredura (MEV), que mostrou que a introdução da argila ao PDVF não afetou a sua morfologia, as mesmas se apresentaram aleatoriamente dispersas, homogêneas, e sem uma direção preferencial. Os resultados obtidos por Difratometria de Raio – X (DRX) mostrou pico mais intenso em 2θ = 20,8o característico da fase β polar e um ombro em 2θ = 18,8o característico da fase cristalina α do PVDF, porém para argila K10 apresenta um pico em 2θ = 8,9o correspondendo a um espaçamento basal de 9,9 Ǻ e outros picos correspondentes ao mineral muscovita e também referente ao quartzo. Análises termogravimétricas (TGA) revelaram que o PVDF possui um comportamento estável até próximo de 420°C, para argila a perda ocorre abaixo de 120°C devido às moléculas de água e também a desidroxilação argilomineral. A determinação do pHPCZ é o ponto onde a curva experimental de pHfinal x pHinicial encontra a reta correspondente ao pHfinal = pHinicial, assim o ponto obtido foi de 6,57, pois neste ponto a carga da superfície do material é zero. A Espectrometria de Absorção Atômica de Alta Resolução com fonte contínua (HR – CS AAS - do inglês: High - resolution Continuum Source Atomic Absorption Spectrometry) foi utilizada para determinar a concentração dos íons metálicos de Pb e Cu nos estudos de adsorção. As concentrações das soluções em contato com o material PVDF/Argila k10 foram medidas para a determinação da capacidade de adsorção através de isotermas com diferentes concentrações molares dos íons metálicos. No estudo de adsorção de Pb e Cu, ambos apresentaram capacidade máxima de adsorção pelo adsorvente (Nfmáx) foram satisfatórios, no qual os valores Nfmáx (teórico) estiveram próximos do Nf (experimental) de 0,1804 x 10-5 para o Cu e de 0,2416 x 10-5 para o Pb e que o tempo necessário para que o equilíbrio fosse atingido é de 10h. O estudo cinético revelou que os dados experimentais no meio aquoso e seus respectivos íons metálicos podem ser descrito pelo modelo pseudo - segunda - ordem com um coeficiente de determinação (R²) de 0,9992 para o Pb e 0,9994 para o Cu.
This work is the preparation of films by means of solutions containing poly (vinylidene fluoride) - PVDF dissolved in N, N-dimethyl formamide (DMF) and ceramic material such as montmorillonite clay (K10), the wiring method Blow solution (FSS). The clay particles were introduced as an additive to PVDF films. The films were characterized by scanning electron microscopy (MEV), which showed that the introduction of the clay PDVF did not affect their morphology, they performed randomly dispersed, homogeneous, and without a preferred direction. The results obtained by diffraction of ray - X (XRD) showed the most intense peak at 2θ = 20,8o characteristic of β-polar phase and one shoulder at 2θ = 18,8o characteristic of the α crystal phase of PVDF, but to present a K10 clay peak at 2θ = 8,9o corresponding to a basal spacing of 9.9 Ǻ and other peaks corresponding to the mineral muscovite and also related to quartz. Thermogravimetric Analysis (TGA) revealed that the PVDF has a stable performance up to near 420°C to clay loss occurs below 120°C due to water molecules and also clay mineral dehydroxylation. The determination of pHPCZ is the point where the experimental curve pHend x pHearly finds the line corresponding to the pHend = pHearly therefore the point obtained was 6.57 because at this point the material surface charge is zero. The High - resolution Continuum Source Atomic Absorption Spectrometry (HR - CS ASS) it was used to determine the concentration of metallic Pb and Cu ion in the adsorption studies. The concentrations of the solutions in contact with the PVDF/K10 clay material were measured to determine the adsorption capacity through isotherms with different molar concentrations of metal ions. In the study of Pb and Cu adsorption, both showed adsorption capacity of the adsorbent (Nf máx) were satisfactory in which values Nf máx (theoretical) were close to Nf (experimental) from 0.1804 x 10-5 to Cu and from 0.2416 x 10-5 to Pb and the time required for equilibrium to be reached is 10h. The kinetic study showed that the experimental data in the aqueous medium and the respective metal ions can be described by the model pseudo - second - order with a coefficient of determination (R²) from 0.9992 for Pb and 0.9994 for Cu.
Faria, Luiz Affonso Souza. "Síntese, caracterização e estudo do processo de adsorção de filmes de nanocompósitos de PVDF/argila /." Ilha Solteira, 2015. http://hdl.handle.net/11449/139493.
Повний текст джерелаResumo: Este trabalho consiste na preparação de filmes por meio de soluções contendo poli(fluoreto de vinilideno) – PVDF dissolvido em N, N Dimetilformamida (DMF) e material cerâmico como argila montmorilonita (K10), pelo método de Fiação por Sopro em Solução (FSS). As partículas de argila foram introduzidas como um aditivo para filmes de PVDF. Os filmes obtidos foram caracterizados por Microscopia Eletrônica de Varredura (MEV), que mostrou que a introdução da argila ao PDVF não afetou a sua morfologia, as mesmas se apresentaram aleatoriamente dispersas, homogêneas, e sem uma direção preferencial. Os resultados obtidos por Difratometria de Raio – X (DRX) mostrou pico mais intenso em 2θ = 20,8o característico da fase β polar e um ombro em 2θ = 18,8o característico da fase cristalina α do PVDF, porém para argila K10 apresenta um pico em 2θ = 8,9o correspondendo a um espaçamento basal de 9,9 Ǻ e outros picos correspondentes ao mineral muscovita e também referente ao quartzo. Análises termogravimétricas (TGA) revelaram que o PVDF possui um comportamento estável até próximo de 420°C, para argila a perda ocorre abaixo de 120°C devido às moléculas de água e também a desidroxilação argilomineral. A determinação do pHPCZ é o ponto onde a curva experimental de pHfinal x pHinicial encontra a reta correspondente ao pHfinal = pHinicial, assim o ponto obtido foi de 6,57, pois neste ponto a carga da superfície do material é zero. A Espectrometria de Absorção Atômica de Alta Resolução com fonte con... (Resumo completo, clicar acesso eletrônico abaixo)
Abstract: This work is the preparation of films by means of solutions containing poly (vinylidene fluoride) - PVDF dissolved in N, N-dimethyl formamide (DMF) and ceramic material such as montmorillonite clay (K10), the wiring method Blow solution (FSS). The clay particles were introduced as an additive to PVDF films. The films were characterized by scanning electron microscopy (MEV), which showed that the introduction of the clay PDVF did not affect their morphology, they performed randomly dispersed, homogeneous, and without a preferred direction. The results obtained by diffraction of ray - X (XRD) showed the most intense peak at 2θ = 20,8o characteristic of β-polar phase and one shoulder at 2θ = 18,8o characteristic of the α crystal phase of PVDF, but to present a K10 clay peak at 2θ = 8,9o corresponding to a basal spacing of 9.9 Ǻ and other peaks corresponding to the mineral muscovite and also related to quartz. Thermogravimetric Analysis (TGA) revealed that the PVDF has a stable performance up to near 420°C to clay loss occurs below 120°C due to water molecules and also clay mineral dehydroxylation. The determination of pHPCZ is the point where the experimental curve pHend x pHearly finds the line corresponding to the pHend = pHearly therefore the point obtained was 6.57 because at this point the material surface charge is zero. The High - resolution Continuum Source Atomic Absorption Spectrometry (HR - CS ASS) it was used to determine the concentration of metallic Pb and Cu ion i... (Complete abstract click electronic access below)
Mestre
Mirzababaei, M. "Reinforcement of clay soils using waste carpet fibres." Thesis, University of Bolton, 2012. http://ubir.bolton.ac.uk/809/.
Повний текст джерелаChegenizadeh, Amin. "Experimental approach to investigate reinforced clay." Thesis, Curtin University, 2012. http://hdl.handle.net/20.500.11937/2288.
Повний текст джерелаDo, Thi Vi Vi. "Matériaux composites à fibres naturelles / polymère biodégradables ou non." Thesis, Grenoble, 2011. http://www.theses.fr/2011GRENA012/document.
Повний текст джерелаNatural fibers have recently attracted the attention of scientists because of their properties of low-cost, low density, renewable, biodegradable and nonabrasive. In this study, three types of bamboo fibers are prepared. Chemical modification of fibers by alkali is used to remove hemicellulose and lignin. Then, fiber surface is modified by acetylation and silane before processing composite materials with polypropylene. As expected, the mechanical properties of the composites increase with the average fibre diameter. Tensile strength and Young's modulus increase when using a coupling agent. Starch/PVA blends are also prepared with glycerol and water as plasticizer. The composite prepared by citric acid crosslinking has excellent mechanical properties. Tensile strength and elongation at break of starch/ PVA composite increase with the content of PVA. The presence of clay and fiber are both found to have considerable effect on the mechanical properties of the composites
Gomes, Leila Veronica da Rocha. "Preparação e caracterização de nanocompósitos de polipropileno reforçados com argila verde lodo e fibra da castanha-do-brasil." Universidade de São Paulo, 2015. http://www.teses.usp.br/teses/disponiveis/3/3133/tde-13072016-145704/.
Повний текст джерелаThe incorporation of vegetable and mineral nanofillers in polymer matrix has been studied mainly in order to improve the mechanical performance properties of polymers for various industrial applications. The organoclays and vegetable fibers are among the materials that stand out as fillers added to polymer for the formation of nanocomposites. This study has also attracted interest owing to achieve improvements in various properties when compared to other traditional composite materials. This study aims to investigate the effects of adding organophilic clay and brazilian nut fibers on the some physical, chemical and mechanical properties of polypropylene nanocomposite. Initially, The component materials were characterized by tests, such as X-ray diffraction, particle size, infrared, scanning electron microscopy, thermal degradation, as well as specific assays for measuring individual characteristics and properties of the clay, for example, viscosity Fann, Foster swelling, plasticity limit, X-ray fluorescence, among others. In the second step, the graftizado polypropylene with maleic anhydride (PP-g-MA) was incorporated into the pure PP, extruded in proportions of 5 weight%, 10 weight% and 20 weight% and injected the samples for tensile and impact tests. From the results of mechanical properties was defined using 5 weight% of PP-g-Ma for the incorporation into pure PP. Finally, samples were prepared containing only polymer, graftizado polymer/clay, graftizado polymer/clay/ fiber. The addition of clay was 5 weight% and the fiber was added to 5 weight%, 10 weight% and 15% by weight, respectively. The nanocomposites were prepared double-screw extruder and the samples injection molded, then, they were characterized by X-ray diffraction, scanning electron microscope (SEM), thermal analysis (TG/DSC), infrared spectroscopy and mechanical strength, flexural and impact test. All the nanocomposites increased mechanical properties as compared to polymer without clay and fibers.
Arrelucé, Montenegro Sebastian, and Larrauri Grecia Luciana Solís. "Incorporación de fibras de polipropileno como método de reforzamiento de suelos arcillosos en Palian - Huancayo." Bachelor's thesis, Universidad Peruana de Ciencias Aplicadas (UPC), 2021. http://hdl.handle.net/10757/656164.
Повний текст джерелаThis thesis aims to evaluate a reinforcement method based on the incorporation of polypropylene fibers to increase the strength and improve the mechanical characteristics of Palian- Huancayo’s clay soil. Clay is a cohesive soil consisting of fine particles, these characteristics determine the capacity of deformation and compression, as well as low resistance to cutting and loads. Therefore, it seeks to strengthen and improve the mechanical behavior of clay through physical and chemical methods. This research proposes the addition of polypropylene fibers as reinforcement method for which the soil under study was analyzed with different percentages of fibers added 0.1, 0.2, 0.3, 0.4 and a fiber length of 10 millimeters. Physical characterization tests were carried out to identify the natural soil: granulometry by sedimentation, limits of consistency and specific gravity of the solids. The natural soil and the mixtures with different percentages of fibers were subjected to the following mechanical characterization tests to determine the variations in behavior: Standard compaction test, unconfined compression test, and shear direct test. The values obtained through the tests demonstrated the improvement of the mechanical characteristics of the soil being the mixture of 0.4% of polypropylene fibers the one that provides a better result compared to the mixtures of a lower proportion.
Tesis
Benoit, Aurélien. "Sources laser fibrées hybrides de haute puissance : Amplification et conversion de fréquences." Thesis, Limoges, 2015. http://www.theses.fr/2015LIMO0024/document.
Повний текст джерелаHigh-power fiber lasers adress an increasing number of applications since ten years. In the frame of a CIFRE contract between the company Eolite Systems and Xlim (joint laboratory between CNRS and the University of Limoges), the goal of this PhD project was to develop the technological blocs to achieve all-fibre high-power lasers emiting out of the conventional spectral band covered by existing lasers.Modal instabilities in large mode area (LMA) fibers are currently the main limitation of the fiber lasers power scaling. We have experimentally demonstrated the relevance of inner cladding aperiodic structures to efficiently delocalize higher order modes outside the gain region. A systematic study of passive fibers based on such structures has shown the single propagation of the fundamental mode over a wide wavelength range from 1 to 2 µm for dimension of core up to 85 µm. This effective mode delocalization even extends up to a core dimension of 140 µm at a 2 µm wavelength.The combination of high power picosecond fiber laser with an average power of 22.7 W and a hydrogen-filled inhibited coupling Kagome fiber allowed us to generate two Raman combs over five frequency octaves from 321 nm to 12.5 µm. These two combs are controlled by the laser pump polarization and generated an average power of 10.1 W displayed over 70 laser lines for circular pump polarization and 8.6 W over 30 lines for linear polarization. Some laser lines within these combs have been generated for the first time from high-power fiber source in the mid-infrared range. We have also demonstrated the generation of high-power line by optimizing the first vibrational Stokes at 1.8 µm with an average power of 9.3 W and a quantum efficiency of the frequency conversion stage close to 80%
Книги з теми "Fibrous clay"
Pam, Robson, ed. Art from sand and earth: With projects using clay, plaster, and natural fibres. Austin, Tex: Raintree Steck-Vaughn, 1997.
Знайти повний текст джерелаCashmere, mohair and other luxury animal fibres for the breeder andspinner. White Rose II, 1987.
Знайти повний текст джерелаЧастини книг з теми "Fibrous clay"
Ruiz-Hitzky, Eduardo, Margarita Darder, Ana C. S. Alcântara, Bernd Wicklein, and Pilar Aranda. "Recent Advances on Fibrous Clay-Based Nanocomposites." In Organic-Inorganic Hybrid Nanomaterials, 39–86. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/12_2014_283.
Повний текст джерелаKaboré, A., and C. Ouellet-Plamondon. "Characterization of the Clay and Fibres for Hygrothermal Modelling." In Lecture Notes in Civil Engineering, 345–56. Singapore: Springer Nature Singapore, 2022. http://dx.doi.org/10.1007/978-981-19-1004-3_29.
Повний текст джерелаAthira, T., and T. Sini. "Effect of Palm Fibres on Lime Blended Sandy Clay." In Lecture Notes in Civil Engineering, 89–95. Singapore: Springer Singapore, 2021. http://dx.doi.org/10.1007/978-981-16-3383-6_9.
Повний текст джерелаRuiz-Hitzky, E., P. Aranda, M. Darder, and F. M. Fernandes. "Fibrous Clay Mineral–Polymer Nanocomposites." In Developments in Clay Science, 721–41. Elsevier, 2013. http://dx.doi.org/10.1016/b978-0-08-098258-8.00023-7.
Повний текст джерелаLópez-Galindo, Alberto, César Viseras, Carola Aguzzi, and Pilar Cerezo. "Pharmaceutical and Cosmetic Uses of Fibrous Clays." In Developments in Clay Science, 299–324. Elsevier, 2011. http://dx.doi.org/10.1016/b978-0-444-53607-5.00013-x.
Повний текст джерелаRamesh, M. "Polysaccharide-Fibrous Clay Bionanocomposites and their Applications." In Advanced Applications of Micro and Nano Clay, 1–26. Materials Research Forum LLC, 2022. http://dx.doi.org/10.21741/9781644901915-1.
Повний текст джерелаDias, M. I., and F. Rocha. "Fibrous clay minerals as lithostratigraphic markers in a Tertiary continental deposit (Malpica do Tejo, Portugal)." In 2001. A Clay Odyssey, 71–78. Elsevier, 2003. http://dx.doi.org/10.1016/b978-044450945-1/50098-1.
Повний текст джерелаSkinner, H. Catherine W., Malcolm Ross, and Clifford Frondel. "What Is an Inorganic Fiber?" In Asbestos and Other Fibrous Materials. Oxford University Press, 1989. http://dx.doi.org/10.1093/oso/9780195039672.003.0004.
Повний текст джерелаUrabe, Kazuo, Sei-ichiro Iida, and Yusuke Izumi. "Ni-Exchanged Sepiolite as a Fibrous Clay Catalyst for Selective Dehydration of n-Butyl Alcolol to Dibutyl Ether." In Zeolites and Microporous Crystals, Proceedings of the International Symposium on Zeolites and Microporous Crystals, 453–60. Elsevier, 1994. http://dx.doi.org/10.1016/s0167-2991(08)63287-5.
Повний текст джерелаDritsas, Ioannis, Tong Sun, and Ken Gratt. "Global Optimization of Conventional and Holey Double-Clad Fibres by Stochastic Search." In Stochastic Optimization - Seeing the Optimal for the Uncertain. InTech, 2011. http://dx.doi.org/10.5772/15508.
Повний текст джерелаТези доповідей конференцій з теми "Fibrous clay"
Elmoselhy, Salah A., Badr S. Azzam, and Sayed M. Metwalli. "Experimental Analysis of Laminated Fibrous Micro-Composite E-Springs for Vehicle Suspension Systems." In ASME 2005 International Mechanical Engineering Congress and Exposition. ASMEDC, 2005. http://dx.doi.org/10.1115/imece2005-80780.
Повний текст джерелаSadooni, Fadhil N., Hamad Al-Saad Al-Kuwari, Ahmad Sakhaee-Pour, Wael S. Matter, and Indra Gunawan. "Lithologic Characterization and Micropore Structures of Gas Shale Strata: An example from the Midra Shale of Western Qatar." In Qatar University Annual Research Forum & Exhibition. Qatar University Press, 2021. http://dx.doi.org/10.29117/quarfe.2021.0024.
Повний текст джерелаSuffri, N., M. Jeludin, and S. Rahim. "Consolidation behaviour of soft clay reinforced with crushed coir fibres." In 7th Brunei International Conference on Engineering and Technology 2018 (BICET 2018). Institution of Engineering and Technology, 2018. http://dx.doi.org/10.1049/cp.2018.1602.
Повний текст джерелаKoška, Pavel, Pavel Peterka, Valérie Doya, Jan Aubrecht, Ivan Kasik, and Ondřej Podrazký. "Enhancement of pump absorption efficiency by bending and twisting of double clad rare earth doped fibers (Conference Presentation)." In Micro-structured and Specialty Optical Fibres, edited by Pavel Peterka, Kyriacos Kalli, Jiri Kanka, and Alexis Mendez. SPIE, 2017. http://dx.doi.org/10.1117/12.2268305.
Повний текст джерелаJasim, Ali, Ondřej Podrazký, Pavel Peterka, Filip Todorov, and Pavel Honzátko. "Experimental investigation and characterization of fabrication shaped clad optical fiber by thermally polishing optical fiber preforms with CO2 laser." In Micro-structured and Specialty Optical Fibres, edited by Pavel Peterka, Kyriacos Kalli, and Alexis Mendez. SPIE, 2019. http://dx.doi.org/10.1117/12.2520995.
Повний текст джерелаGrábner, Martin, Kanagaraj Nithyanandan, Pavel Peterka, Pavel Koška, Pavel Honzátko, and Ali A. Jasim. "Numerical modelling of pump absorption in coiled and twisted double-clad fiber: a prospect for tandem pumped fiber laser." In Micro-Structured and Specialty Optical Fibres VI, edited by Christian-Alexander Bunge, Kyriacos Kalli, and Pavel Peterka. SPIE, 2020. http://dx.doi.org/10.1117/12.2557230.
Повний текст джерелаRenner-Erny, Ruth, Loredana Di Labio, Valerio Romano, Willy Lüthy, and T. Feurer. "Silica-based air-clad fibres: evaluation of drawing parameters." In Photonics Europe, edited by Ali Adibi, Shawn-Yu Lin, and Axel Scherer. SPIE, 2006. http://dx.doi.org/10.1117/12.662388.
Повний текст джерелаKochanowicz, Marcin, and Dominik Dorosz. "The manufacturing and properties of double-clad optical fibres." In SPIE Proceedings, edited by Ryszard S. Romaniuk. SPIE, 2007. http://dx.doi.org/10.1117/12.784685.
Повний текст джерелаGambell, Adam, Nikita Simakov, Alexander Hemming, and Adrian Carter. "Brillouin measurements of double clad, metal coated optical fibres." In Fiber Lasers XIX: Technology and Systems, edited by César Jáuregui-Misas and V. R. Supradeepa. SPIE, 2022. http://dx.doi.org/10.1117/12.2614974.
Повний текст джерелаPeterka, P. "Novel coupling element for end-pumping of double-clad fibres." In 31st European Conference on Optical Communications (ECOC 2005). IEE, 2005. http://dx.doi.org/10.1049/cp:20050706.
Повний текст джерела