Книги з теми "Fibre reinforced plastics testing"

John, Summerscales, ed. Non-destructive testing of fibre-reinforced plastics composites. London: Elsevier Applied Science, 1987.

Wachter, Friedrich K. von. Ein Beitrag zur Automatisierung der zerstörungsfreien Ultraschallprüfung von Faserverbundkunststoffen. Aachen: Ch. Shaker, 1992.

Sierakowski, R. L. Dynamic loading and characterization of fiber-reinforced composites. New York: Wiley, 1997.

Perzak, F. J. Fire tests of rigid plastic ventilation ducts. Pittsburgh, Pa: U.S. Dept. of the Interior, Bureau of Mines, 1987.

Kuzik, Marc D. Out-of-plane cyclic behavior of masonry walls reinforced externally with GFRP. Edmonton: Dept. of Civil and Environmental Engineering, University of Alberta, 1999.

Ye, Binshan. Characteristics of glass fiber-reinforced composite materials for use in roadside safety barriers. McLean, Va. (6300 Georgetown Pike, McLean 22101-2296): U.S. Dept. of Transportation, Federal Highway Administration, Research and Development, Turner-Fairbank Highway Research Center, 1994.

Hildebrand, Martin. A comparison of FRP-sandwich penetrating impact test methods. Espoo: VTT, Technical Research Centre of Finland, 1996.

Grace, Nabil F. Environmental/durability evaluation of FRP composite strengthened bridges. Southfield, Mich: Lawrence Technological University, Civil Engineering Dept., 2003.

Egan, Margaret R. Thermal decomposition of ventilation ducting. Washington, DC: Dept. of the Interior, 1990.

Egan, Margaret R. Thermal decomposition of ventilation ducting. Pgh. [i.e. Pittsburgh] PA: United States Dept. of the Interior, Bureau of Mines, 1990.

Ellingwood, Bruce. Load and resistance factor design (LRFD) for structures using fiber-reinforced polymer (FRP) composites. Gaithersburg, Md: U.S. Dept. of Commerce, Technology Administration, National Institute of Standards and Technology, 2000.

FRP setchaku ni yoru kōkōzōbutsu no hoshū, hokyō gijutsu no saisentan. Tōkyō: Doboku Gakkai, 2012.

L, Matthews F., ed. Joining fibre-reinforced plastics. London: Elsevier Applied Science, 1987.

National Research Council (U.S.). Transportation Research Board. Annual Meeting, National Research Council (U.S.). Transportation Research Board. Committee on General Structures, National Research Council (U.S.). Transportation Research Board. Committee on Steel Bridges, National Research Council (U.S.). Transportation Research Board. Committee on Concrete Bridges, National Research Council (U.S.). Transportation Research Board. Committee on Dynamics and Field Testing of Bridges, National Research Council (U.S.). Transportation Research Board. Committee on Seismic Design of Bridges, National Research Council (U.S.). Transportation Research Board. Committee on Culverts and Hydraulic Structures, National Research Council (U.S.). Transportation Research Board. Committee on Structural Fiber-Reinforced Polymers, and National Research Council (U.S.). Transportation Research Board. Committee on Subsurface Soil-Structure Interaction, eds. Design of structures, 2006. Washington, D.C: Transportation Research Board, 2006.

Wipf, Terry J. Evaluation of post-tension strengthened steel girder bridge using FRP bars. Ames, IA: Center for Transportation Research and Education, Iowa State University, 2003.

Davim, J. Paulo, ed. Machinability of Fibre-Reinforced Plastics. Berlin, München, Boston: DE GRUYTER, 2015. http://dx.doi.org/10.1515/9783110292251.

Redvers-Mutton, Tony. Fibre reinforced plastics: The West European perspective. London: Pearson Professional, 1995.

Kanellopoulos, Vasilios Nichalaou. Hygrothermal characteristics of carbon fibre reinforced plastics. Salford: University of Salford, 1985.

Farooq, Muhammad Khawar. Acoustic emission in notched specimens of fibre reinforced plastics. Salford: University of Salford, 1992.

Lanu, Matti. Testing fibre-reinforced concrete in some structural applications. Espoo, Finland: Technical Research Centre of Finland, 1995.

1945-, Reid S. R., and Zhou G, eds. Impact behaviour of fibre-reinforced composite materials. Boca Raton, FL: CRC Press, 2000.

Vares, Sirje. Fibre-reinforced high-strength concrete. Espoo, Finland: Technical Research Centre of Finland, 1993.

J, Burgoyne C., ed. FRPRCS-5: Fibre-reinforced plastics for reinforced concrete structures : proceedings of the Fifth International Conference on Fibre-Reinforced Plastics for Reinforced Concrete Structures, Cambridge, UK, 16-18 July 2001. London: Thomas Telford, 2001.

Rahimi, Hamid. Strengthening of concrete structures with externally bonded fibre-reinforced plastics. Oxford: Oxford Brookes University, 1996.

Rose, David De. The rehabilitation of a concrete structure using fibre reinforced plastics. Ottawa: National Library of Canada = Bibliothèque nationale du Canada, 1999.

Bernd, Lauke, and Mai Y. W. 1946-, eds. Science and engineering of short fibre reinforced polymers composites. Oxford: Woodhead Publishing, 2009.

1936-, Harris Bryan, ed. Fatigue in composites: Science and technology of the fatigue response of fibre-reinforced plastics. Boca Raton: CRC Press, 2003.

Summerscales, John. International dissertations on fibre reinforced polymers: Author index to 2792. Lancaster, Pa: Technomic Pub., 1988.

Hodges, Joanne. Residual thermal stresses in carbon fibre reinforced plastics for aerospace applications. Salford: University of Salford, 1988.

Ingram, Andrew. Environmental effects on the compressive behaviour of carbon fibre reinforced plastics. Birmingham: University of Birmingham, 1989.

Natural fibre reinforced polymer composites: From macro to nanoscale. Paris: Éd. des Archives Contemporaines, 2009.

Bersee, H. E. N. Diaphragm forming of continuous fibre reinforced thermoplastics: Process analysis and development : proefschrift / door Harald Erik Niklaus Bersee. Delft: Delft University Press, 1996.

Scudder, Lawrence Philip. Characterisation and testing of carbon fibre reinforced polymer composites using laser generated ultrasound. [s.l.]: typescript, 1994.

Carr, Debra Julie. The influence of matrix properties on the compressive strength of CFRP [carbon fibre reinforced plastics]. Birmingham: University of Birmingham, 1994.

Allen, David. Technical change, economics of scope and contestable markets: The case of the fibre-reinforced plastics consortium. Edinburgh: University of Edinburgh. Department of Business Studies, 1985.

Mattock, Alan H. Application of fiber reinforced plastic rods as prestrssing [i.e. prestressing] tendons in concrete structures: Final report, Research Project GC 8286, Task 25, fiberglass tendons. [Olympia, Wash.]: Washington State Dept. of Transportation, Planning, Research and Public Transportation Division, in cooperation with the U.S. Dept. of Transportation, Federal Highway Administration, 1989.

RILEM Technical Committee162-TDF, Test and Design Methods for Steel Fibre Reinforced Concrete. Workshop. Test and design methods for steel fibre reinforced concrete: Background and experiences : proceedings of the RILEM TC 162-TDF Workshop, Bochum, Germany, 20-21 March 2003. Bagneux, France: RILEM Publications, 2003.

Nakamura, Kazumasa. Kanchi nōgyō yōsuiro ni okeru FRPM-ban rainingu kōhō no taikyūsei ni kansuru kenkyū: Kyōdō kenkyū hōkokusho. [Ibaraki-ken Tsukuba-shi]: Doboku Kenkyūjo, 2012.

N, Swamy R., International Union of Testing and Research Laboratories for Materials and Structures., and University of Sheffield. Dept. of Mechanical and Processd Engineering., eds. Fibre reinforced cement and concrete: Proceedings of the fourth international symposium held by RILEM (the International Union of Testing and Research Laboratories for Materials and Structures) and organized by the Department of Mechanical and Process Engineering, University of Sheffield, UK, Sheffield, July 20-23, 1992. London: E & FN Spon, 1992.

International Union of Testing and Research Laboratories for Materials and Structures. (4th 1992 Sheffield, U.K.). Fibre reinforced cement and concrete: Proceedings of the fourth International Symposium held by RILEM (The International Union of Testing and Research Laboratories for Materials and Structures) and organized by the Dept. of Mechanical and Process Engineering, University of Sheffield, UK, Sheffield, July 20-23, 1992. London: E & FN Spon, 1992.

International Symposium on Fibre-Reinforced Plastics in Dentistry (1st 1998 Turku, Finland). The first International Symposium on Fibre-Reinforced Plastics in Dentistry: A special symposium of the annual meeting of the European Prosthodontic Association (EPA) on 26-27 August 1998 in Turku, Finland. Edited by Vallittu Pekka K and European Prosthodontic Association. Turku: Department of Prosthetic Dentistry & Biomaterials Project, Institute of Dentistry, University of Turku, 1999.

G, Mamalis Athanasios, ed. Crashworthiness of composite thin-walled structural components. Lancaster, Pa: Technomic Pub. Co., Inc., 1998.

Hodgkinson, John M. Mechanical Testing of Advanced Fibre Composites. CRC, 2000.

John, Summerscales, ed. Non-destructive testing of fibre-reinforced plastics composites. Elsevier Applied Science, 1990.

Tingley, Dan A. The stress-strain relationships in wood and fiber-reinforced plastic laminae of reinforced glued-laminated wood beams. 1996.

Tingley, Dan A. The stress-strain relationships in wood and fiber-reinforced plastic laminae of reinforced glued-laminated wood beams. 1996.

United States. National Aeronautics and Space Administration., ed. Ultrasonic inspection of carbon fiber reinforced plastic by means of sample recognition methods. Washington D.C: National Aeronautics and Space Administration, 1985.

Bridge design and performance and composite materials. Washington, D.C: Transportation Research Board, National Research Council, 1989.

Keizai Sangyōshō kijun ninshō kenkyū kaihatsu jigyō: Senʼi fukugō zairyō no hattengata oyobi kisoteki kyōdo shikenhō no hyōjunka ni okeru "A : hattengata kyōdo shikenhō" ni kansuru chōsa. [Tokyo]: Tanso Senʼi Kyōkai, 2007.

Keizai Sangyōshō kijun ninshō kenkyū kaihatsu jigyō: Senʼi fukugō zairyō no hattengata oyobi kisoteki kyōdo shikenhō no hyōjunka ni okeru "A : hattengata kyōdo shikenhō" ni kansuru chōsa. [Tokyo]: Tanso Senʼi Kyōkai, 2007.