Дисертації з теми "Fibre reinforced epoxy composites"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Fibre reinforced epoxy composites".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Liu, Yan. "Nano-reinforced epoxy resin for carbon fibre fabric composites." Thesis, University of Manchester, 2016. https://www.research.manchester.ac.uk/portal/en/theses/nanoreinforced-epoxy-resin-for-carbon-fibre-fabric-composites(284f8361-2530-4fc8-8abe-759ff2e57891).html.
Повний текст джерелаMahmood, Amjed Saleh. "Processing-performance relationships for fibre-reinforced composites." Thesis, University of Plymouth, 2016. http://hdl.handle.net/10026.1/4181.
Повний текст джерелаKretsis, George. "Mechanical characterisation of hybrid glass/carbon fibre-reinforced plastics." Thesis, Imperial College London, 1987. http://hdl.handle.net/10044/1/46982.
Повний текст джерелаBerg, Jolyon. "The role of fibre coatings on interphase formation in glass fibre epoxy resin composites." Thesis, University of Sheffield, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.245546.
Повний текст джерелаHsieh, Feng-Hsu. "Nanofiber reinforced epoxy composite." Ohio : Ohio University, 2006. http://www.ohiolink.edu/etd/view.cgi?ohiou1146149557.
Повний текст джерелаXiao, Keqin. "Fracture behaviour of rubber-modified epoxies and their carbon fibre-reinforced composites." Thesis, The University of Sydney, 2000. https://hdl.handle.net/2123/27762.
Повний текст джерелаPrickett, Andrew C. "Intralaminar cracking of fibre reinforced composites : a fracture mechanics and ToF-SIMS study." Thesis, University of Surrey, 2001. http://epubs.surrey.ac.uk/798035/.
Повний текст джерелаSirivedin, Suparerk. "Micromechanics of progressive failure in carbon fibre-reinforced composites using finite element method." Thesis, King's College London (University of London), 2001. https://kclpure.kcl.ac.uk/portal/en/theses/micromechanics-of-progressive-failure-in-carbon-fibrereinforced-composites-using-finite-element-method(825de9c4-f644-4b2f-b6d1-95569f46c0a5).html.
Повний текст джерелаGhazali, Habibah. "Dual-Capsule Based Self-Healing of Epoxy and Carbon-Epoxy Laminated Composite." Thesis, The University of Sydney, 2016. http://hdl.handle.net/2123/15387.
Повний текст джерелаMagrini, Michael A. "Fiber reinforced thermoplastics for ballistic impact." Birmingham, Ala. : University of Alabama at Birmingham, 2010. https://www.mhsl.uab.edu/dt/2010m/magrini.pdf.
Повний текст джерелаZhou, Gang. "Preparation, structure, and properties of advanced polymer composites with long fibers and nanoparticles." Columbus, Ohio : Ohio State University, 2007. http://rave.ohiolink.edu/etdc/view?acc%5Fnum=osu1173287075.
Повний текст джерелаGreen, Keith Jamahl. "Multiscale fiber reinforced composites using a carbon nanofiber/epoxy nanophased matrix processing, properties, and thermochemical behavior /." Birmingham, Ala. : University of Alabama at Birmingham, 2007. https://www.mhsl.uab.edu/dt/2007m/green.pdf.
Повний текст джерелаThiagarajan, C. "Smart characterisation of damage in carbon fibre reinforced composites under static and fatigue loading condition by means of electrical resistivity measurements." Thesis, Cranfield University, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.309660.
Повний текст джерелаBozkurt, Emrah Tanoğlu Metin. "Mechanical and thermal properties of non-crimp glass fiber reinforced composites with silicate nanoparticule modified epoxy matrix/." [s.l.]: [s.n.], 2006. http://library.iyte.edu.tr/tezler/master/makinamuh/T000517.pdf.
Повний текст джерелаKeywords: polymer composites, Nanoparticles, glass fiber, mechanical properties, thermal properties. Includes bibliographical references (leaves 75-79).
Bettelli, Mercedes Amelia. "Effect of Induction-Heat Post-Curing on Residual Stresses in Fast-Curing Carbon Fibre Reinforced Composites." Thesis, Luleå tekniska universitet, Institutionen för teknikvetenskap och matematik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:ltu:diva-80527.
Повний текст джерелаZhang, Mei. "The effects of contamination on the mechanical properties of carbon fibre reinforced epoxy composite materials." Thesis, University of Portsmouth, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.299084.
Повний текст джерелаAbessalam, Qutaiba. "Investigation into the modes of damage and failure in natural fibre reinforced epoxy composite materials." Thesis, University of East London, 2011. http://roar.uel.ac.uk/2632/.
Повний текст джерелаParker, Melanie A. "Flexural Response of Masonry Elements Strengthened with Epoxy-Bonded Elastomeric Fiber Reinforced Films." Thesis, Georgia Institute of Technology, 2006. http://hdl.handle.net/1853/19836.
Повний текст джерелаCormier, Daniel. "Repair of Conductive Layer on Carbon Fibre Reinforced Polymer Composite with Cold Gas Dynamic Spray." Thesis, Université d'Ottawa / University of Ottawa, 2015. http://hdl.handle.net/10393/33160.
Повний текст джерелаKhasawneh, Firas Abdallah. "Characterization of drillability of sandwich structure of carbon fiber reinforced epoxy composite over titanium alloy." Diss., Columbia, Mo. : University of Missouri-Columbia, 2006. http://hdl.handle.net/10355/5871.
Повний текст джерелаThe entire dissertation/thesis text is included in the research.pdf file; the official abstract appears in the short.pdf file (which also appears in the research.pdf); a non-technical general description, or public abstract, appears in the public.pdf file. Title from title screen of research.pdf file (viewed on September 13, 2007). Vita. Includes bibliographical references.
Turmel, J.-P. "Effect of phase separation in Epoxy/PEI matrix on the mixed - mode I/II delamination behaviour of unidirectional glass fibre reinforced composites." Thesis, Cranfield University, 1995. http://dspace.lib.cranfield.ac.uk/handle/1826/11335.
Повний текст джерелаTurmel, Denis Jean-Pierre. "Effect of phase separation in epoxy/PEI matrix on the mixed-mode I/II delamination behaviour of unidirectional glass fibre reinforced composites." Thesis, Cranfield University, 1995. http://dspace.lib.cranfield.ac.uk/handle/1826/11335.
Повний текст джерелаChan, Kathleen Joyce. "Investigation of Processing Conditions and Viscoelastic Properties on Frictional Sliding Behavior of Unidirectional Carbon Fiber Epoxy Prepreg." Thesis, Virginia Tech, 2018. http://hdl.handle.net/10919/86444.
Повний текст джерелаMaster of Science
The quality of composite parts and structures depends strongly on the friction present during the composite forming process. One of the major challenges in the forming process is the occurrence of wrinkling and shape distortions of the fabric caused by the surface differences between the forming tool and material. The presence of these defects can compromise the final material property and lead to failure when in use. Frictional measurements of composites can vary widely depending on processing parameters, measurement technique, and instruments used. The extent of interaction between the tool and surface of the material depends on the tooling height, and by extension, contact area, which cannot easily be monitored with traditional test designs. A commercial rheometer was used in this study to evaluate tool-ply friction of unidirectional carbon fiber epoxy prepreg at various contact pressures, temperatures, and sliding velocities. Gap height and torque were monitored to provide information on the frictional dependence of processing parameters. In addition, surface-imaging results were coupled with rheological results to examine the relationship between friction and fiber distortions. The understanding of changes in material property with respect to the tooling process is the key to optimizing the composite forming process.
チェン, フオン ウェン, and Nguyen Tien Phong. "Study on the effects of green micro/nano fiber addition on mechanical properties of carbon fiber reinforced epoxy composites." Thesis, https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12614789/?lang=0, 2013. https://doors.doshisha.ac.jp/opac/opac_link/bibid/BB12614789/?lang=0.
Повний текст джерелаRahman, Md Arifur. "Fabrication and Mechanical Characterization of Novel Hybrid Carbon-Fiber/Epoxy Composites Reinforced with Toughening/Self-Repairing Nanofibers at Interfaces." Thesis, North Dakota State University, 2012. https://hdl.handle.net/10365/26735.
Повний текст джерелаSeghini, Maria Carolina. "Mechanical Analysis and Fibre/Matrix Interface Optimization for Next Generation of Basalt-Plant Fibre Hybrid Composites." Electronic Thesis or Diss., Chasseneuil-du-Poitou, Ecole nationale supérieure de mécanique et d'aérotechnique, 2020. http://www.theses.fr/2020ESMA0003.
Повний текст джерелаGlobal awareness of environmental issues has resulted in the emergence of “green” composites, in which natural fibres are used to replace synthetic ones. However, in semi-or structural applications, it can be inconvenient to use composites based on natural fibres. A possible solution to this problem is the development of hybrid composite materials, combining together plies of natural and synthetic fibres. In this framework, the aim of this research project was to develop basalt-flax fibre hybrid composites with a view to obtaining more environmentally friendly composites for semi-structural applications. Hybrid composites were produced through vacuum infusion molding with epoxy matrix.For comparison purposes, 100% flax fibre composites and 100% basalt fibre composites were also manufactured. A quasi-static and dynamic mechanical characterization showed that the hybridization allows the production of a composite with intermediate mechanical performances compared to those possessed by flax and basalt composites. However, the damage analysis has revealed the need to optimize the fibre/matrix interface adhesion quality, in order to increase the mechanical properties of the resulting hybrid composites. For this reason, different surface modification treatments have been specifically designed and investigated for flax and basalt fibres. Flax and basalt fibres were treated by the physical process of Plasma Enhanced Chemical Vapor Deposition. Flax fibres were also subjected to two chemical treatments using enzymatic species and supercritical CO2. The effects of the surface modification treatments on the thermal stability, morphology and mechanical properties of flax and basalt fibres have been investigated. The degree and extent of fibre/matrix adhesion were analyzed by micromechanical fragmentation tests on monofilament composites. The adhesion quality between fibres and both epoxy and vinylester matrices has been assessed in terms of critical fragment length, debonding length and interfacial shear strength. High-resolution μ-CT has been used to support the analysis of the damage mechanisms during fragmentation tests. For both flax and basalt fibres, the best results were obtained after the plasma polymer deposition process. This process was able to produce a homogeneous tetravinylsilane coating on the surface of basalt and flax fibres, which resulted in a significant increase in the fibre/matrix adhesion, thus paving the way for the next generation of more environmentally friendly hybrid composites for semi-structural applications
Subagio, Bambang Sugeng. "Contribution à la modélisation de l'endommagement de fatigue en flexion dans les matériaux composites unidirectionnels." Ecully, Ecole centrale de Lyon, 1987. http://www.theses.fr/1987ECDLA008.
Повний текст джерелаLIU, ZENG-GANG. "Comportement et modelisation des materiaux composites carbone/epoxyde en cisaillement a grande vitesse." Nantes, 1987. http://www.theses.fr/1987NANT2011.
Повний текст джерелаPonsot, Bernard. "Influence de la matrice sur le comportement a long terme de composites carbone-epoxyde." Paris, ENMP, 1987. http://www.theses.fr/1987ENMP0058.
Повний текст джерелаCuynet, Amélie. "Etude du comportement mécanique à l’impact et en post impact de matériaux composites à fibres végétales." Thesis, Université Grenoble Alpes (ComUE), 2018. http://www.theses.fr/2018GREAA017/document.
Повний текст джерелаThe purpose of this PhD project is to study and analyze the mechanical behavior during the impact and post-impact of plant-fiber based composite materials. The conduct of this thesis requires: The manufacturing and characterization of the materials involved in the study : The materials are composed of plant-fiber fabrics (flax and/or hemp) impregnated with thermosetting resin (epoxy type) or thermoplastic resin (PP or PLA). These are manufactured using the vacuum infusion process or using thermocompression, depending on the resin. The materials are plate-shaped. The mechanical characterization will be performed using static mechanical testing and impact testing with a drop tower (over several energy levels). This will be first conducted on unmodified specimens (unimpacted and unaged, with and without fiber reinforcement) then on degraded specimens (impacted with a known energy and/or aged in humidity and temperature). The characterization of damage: It will, from the analysis of the images associated to the techniques of the acoustic emission, locate and identify the various damage mechanisms that intervene in these materials during different stresses. This study will lead to define the degree of harmfulness of such damage while associating to the approach the influence of microstructural parameters such as the nature of the fiber reinforcement and the components (resin and fibers). The identification of behavioral patterns: It consists in suggesting a method to identify the material parameters of behavioral patterns while taking into account the damage level of the material's microstructure (resin and fiber strands). This study will lead to the implementation of a finite element model updating-like method using experimental databases such as kinematic field measurements. The ultimate purpose is to have reliable and predictive models in order to calculate the structures of such materials in the industry
Brunel, Jean-Evrard. "Influence de l'endommagement sur la rupture de plaques composites en présence de surcontraintes." Paris 13, 1989. http://www.theses.fr/1989PA132008.
Повний текст джерелаNesa, Daniel. "Etude de la fissuration d'un composite unidirectionnel verre-résine." Paris, ENMP, 1987. http://www.theses.fr/1987ENMP0093.
Повний текст джерелаNguyen, Thanh Hai. "Contribution à l'étude du comportement thermomécanique à très haute température des matériaux composites pour la réparation et/ou le renforcement des structures de Génie Civil." Thesis, Lyon 1, 2015. http://www.theses.fr/2015LYO10244/document.
Повний текст джерелаIn the area of the strengthening and/or the reparation of reinforced concrete structures with composites by means of the external bonding method using an epoxy adhesive, one of the preoccupation of the scientific community is the structural integrity of this system in the event of fire in which the high temperature is the essential feature et can reach up to 1200°C. This research focuses on the thermo-mechanical behavior of composite materials [carbon/epoxy adhesive composite (or carbon fiber reinforced polymer (CFRP), textile/cementitious mortar composite (or textile reinforced concrete (TRC)] and an epoxy-based adhesive. The evolution of mechanical properties and other mechanical aspects of these materials with the temperature has been characterized. A new experimental procedure concerning the measurement of sample strain by the laser sensor is developed and validated. An experimental and numerical study has been realized in order to mainly determine the temperature at the failure of "composite/adhesive/composite" joints under thermal and mechanical loadings. The effectiveness of the thermal protection of two insulators [PROMASPRAY®T (a commercial product of the PROMAT company and the insulator A (product developed by the LGCIE site Tuset)] has also been investigated in this PhD thesis. Finally, a numerical approach, using ANSYS software, is used to determine, in the preliminary and approximate way, at material scale, thermal properties of the materials [the textile reinforced concrete (TRC) and the insulator A]
Renault, Michel. "Tolerance a l'endommagement de composites carbone-resine et stratifies t300-914." Paris, ENMP, 1988. http://www.theses.fr/1988ENMP0109.
Повний текст джерелаBisanda, Elifis T. N. "Sisal fibre reinforced composites." Thesis, University of Bath, 1991. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.278675.
Повний текст джерелаRice, Kolten Dewayne. "Bending Behavior of Concrete Beams with Fiber/Epoxy Composite Rebar." BYU ScholarsArchive, 2019. https://scholarsarchive.byu.edu/etd/9062.
Повний текст джерелаShawkataly, Abdul Khalil H. P. "Acetylated plant fibre reinforced composites." Thesis, Bangor University, 1999. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.267327.
Повний текст джерелаLavadiya, Dayakar Naik. "Effective Properties of Randomly Oriented Kenaf Short Fiber Reinforced Epoxy Composite." DigitalCommons@USU, 2015. http://digitalcommons.usu.edu/etd/4600.
Повний текст джерелаL, Dayakar Naik. "Effective Properties of Randomly Oriented Kenaf Short Fiber Reinforced Epoxy Composite." DigitalCommons@USU, 2015. https://digitalcommons.usu.edu/etd/4587.
Повний текст джерелаTreiber, Johannes W. G. "Performance of tufted carbin fibre/epoxy composites." Thesis, Cranfield University, 2011. http://dspace.lib.cranfield.ac.uk/handle/1826/5531.
Повний текст джерелаHo, Christopher Sui-keung. "Mesostructure quantification of fibre-reinforced composites." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 2000. http://www.collectionscanada.ca/obj/s4/f2/dsk1/tape3/PQDD_0017/MQ49722.pdf.
Повний текст джерелаDyer, S. J. R. "Elastic anisotropy in fibre reinforced composites." Thesis, University of Leeds, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.373548.
Повний текст джерелаWooldridge, Andrew. "Fibre reinforced composites via coaxial electrospinning." Thesis, University of Warwick, 2016. http://wrap.warwick.ac.uk/95272/.
Повний текст джерелаJia, Weiwei. "Polylactic acid fibre reinforced biodegradable composites." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/polylactic-acid-fibre-reinforced-biodegradable-composites(732904c8-584b-4fbb-b68a-3cf14dc84e9f).html.
Повний текст джерелаTriantafyllidis, Zafeirios. "Structural enhancements with fibre-reinforced epoxy intumescent coatings." Thesis, University of Edinburgh, 2017. http://hdl.handle.net/1842/29514.
Повний текст джерелаEmbrey, Leslie. "Three-Dimensional Graphene Foam Reinforced Epoxy Composites." FIU Digital Commons, 2017. http://digitalcommons.fiu.edu/etd/3128.
Повний текст джерелаDhillon, Jagminder. "Coated fibre composites using rubbery and ductile fibre/matrix interlayers." Thesis, Loughborough University, 1991. https://dspace.lboro.ac.uk/2134/33043.
Повний текст джерелаGu, Xiaohong. "Micromechanics of model carbon-fibre/epoxy-resin composites." Thesis, University of Manchester, 1995. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.488261.
Повний текст джерелаCantwell, W. J. "Impact damage in carbon fibre composites." Thesis, Imperial College London, 1986. http://hdl.handle.net/10044/1/7834.
Повний текст джерелаMcCombe, Greg. "Fibre Reinforced Composites with Integrated Electromagnetic Functionality." Thesis, University of Bristol, 2010. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.525467.
Повний текст джерела