Добірка наукової літератури з теми "Fabric thermal performance"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Fabric thermal performance".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Fabric thermal performance"
Mandal, Sumit, and Guowen Song. "Characterizing thermal protective fabrics of firefighters’ clothing in hot surface contact." Journal of Industrial Textiles 47, no. 5 (August 31, 2016): 622–39. http://dx.doi.org/10.1177/1528083716667258.
Повний текст джерелаYang, Liu, Jian Zhong Yang, and Long Li. "Research on Thermal Protection Performance of Multilayer Fabrics System of Fire Clothing." Advanced Materials Research 1004-1005 (August 2014): 1432–36. http://dx.doi.org/10.4028/www.scientific.net/amr.1004-1005.1432.
Повний текст джерелаAfzal, Ali, Sheraz Ahmad, Abher Rasheed, Faheem Ahmad, Fatima Iftikhar, and Yasir Nawab. "Influence of Fabric Parameters on Thermal Comfort Performance of Double Layer Knitted Interlock Fabrics." Autex Research Journal 17, no. 1 (March 1, 2017): 20–26. http://dx.doi.org/10.1515/aut-2015-0037.
Повний текст джерелаLuo, Xiao Wen, Zhi Qing Shu, and Jun Li. "Comprehensive Evaluation on Performance of PSA Blended Fabrics." Advanced Materials Research 821-822 (September 2013): 317–20. http://dx.doi.org/10.4028/www.scientific.net/amr.821-822.317.
Повний текст джерелаChen, An, and Qian Liu. "Structural Design and Performance of Woven Electrothermal Fabric Based on Silver-Plated Filament." AATCC Journal of Research 8, no. 2_suppl (December 2021): 78–85. http://dx.doi.org/10.14504/ajr.8.s2.16.
Повний текст джерелаMahbub, Rana Faruq, Lijing Wang, Lyndon Arnold, Sinnappoo Kaneslingam, and Rajiv Padhye. "Thermal comfort properties of Kevlar and Kevlar/wool fabrics." Textile Research Journal 84, no. 19 (May 23, 2014): 2094–102. http://dx.doi.org/10.1177/0040517514532157.
Повний текст джерелаZhang, Hui, Guowen Song, Haitao Ren, and Juan Cao. "The effects of moisture on the thermal protective performance of firefighter protective clothing under medium intensity radiant exposure." Textile Research Journal 88, no. 8 (February 1, 2017): 847–62. http://dx.doi.org/10.1177/0040517517690620.
Повний текст джерелаCui, Xin, Qin Fei Ke, and Guang Ming Cai. "Evaluation of Light Protective Properties of High Performance Aramid Fabrics." Applied Mechanics and Materials 551 (May 2014): 28–31. http://dx.doi.org/10.4028/www.scientific.net/amm.551.28.
Повний текст джерелаYang, Kai, Ming Li Jiao, and Zheng Wang. "Study on the Effect of Cotton Fabric's Weight on its Dynamic Heat and Moisture Comfort Property." Advanced Materials Research 332-334 (September 2011): 763–66. http://dx.doi.org/10.4028/www.scientific.net/amr.332-334.763.
Повний текст джерелаMandal, Sumit, Simon Annaheim, Andre Capt, Jemma Greve, Martin Camenzind, and René M. Rossi. "A categorization tool for fabric systems used in firefighters' clothing based on their thermal protective and thermo-physiological comfort performances." Textile Research Journal 89, no. 16 (October 31, 2018): 3244–59. http://dx.doi.org/10.1177/0040517518809055.
Повний текст джерелаДисертації з теми "Fabric thermal performance"
Jack, Richard. "Building diagnostics : practical measurement of the fabric thermal performance of houses." Thesis, Loughborough University, 2015. https://dspace.lboro.ac.uk/2134/19274.
Повний текст джерелаPrado, Monica Faria de Almeida. "Conforto térmico nos edifícios das indústrias de calçados de Jaú." Universidade de São Paulo, 2012. http://www.teses.usp.br/teses/disponiveis/102/102131/tde-28022013-104203/.
Повний текст джерелаThis paper discusses the thermal performance obtained in industrial buildings in the footwear sector, given the importance of obtaining favorable environmental conditions for the execution of activities through an architecture suited to the climate context. Thus, the objective of this research is to evaluate the thermal comfort conditions provided by the buildings of the footwear industries of Jaú city, an important industrial pole. It is characterized the typologies of building\'s construction regarding its geometry, materials and ventilation system. The passive strategies for achieving thermal comfort in the factory sheds are identified and evaluated using the recommendations present in the NBR 15220. To evaluate the thermal comfort conditions it was measured the environmental variables, and the temperature was examined under conditions of thermal acceptability, as established by ASHRAE 55-2010. In order to estimate the thermal sensation of the users, the PMV and PPD indices were used. Also, a questionnaire was applied in order to check the level of employee satisfaction with the working environment. The results show that most of the buildings presents a typology similar with a rectangular geometry and ventilation obtained through frames at the facades. The absence of different passive strategies results in a building with a low thermal inertia and vulnerable to the external weather conditions, and in hot periods, the internal temperature was above 30°C, and during colder periods it was lower than 15°C. The thermal sensation of users in most of the period of the working shift matches the thermal discomfort to the heat, especially in the afternoon, and the percentage of discontentment exceeds 80%. This way, there is a need to optimize the adoption of passive strategies, to provide better thermal conditions of work. For this purpose, simple solutions that provide improvements to the thermal performance of buildings are given, examples: the use of systems which allows evaporative cooling and expansion of openings areas for the ventilation of the building.
TSAI, CHIA-HUNG, and 蔡家弘. "A Study on the Thermal Performance of Fabric Garden as the Vertical Greenery." Thesis, 2017. http://ndltd.ncl.edu.tw/handle/04461288100524688733.
Повний текст джерела輔英科技大學
環境工程與科學系碩士班
105
The rise in extreme weather events globally in recent years has not only led to drastic rises in summer temperatures in Taiwan, but also higher temperatures in spring and fall. Due to urbanization and dense populations, Taiwan has witnessed a stronger urban heat island effect than neighboring countries. A substantial body of research has shown that the vertical greening system used in modern architectures may be highly beneficial to heat insulation and reduction of indoor temperatures. Other recommendations include increasing urban green areas, reducing urban heat island effect, improving bio-diversity in cities, cleansing air quality and furnishing the façade of a city. Among vertical greening approaches, fabric gardening is a medium with many notable advantages, such as high durability, variety in design, and low maintenance. It is also environmentally friendly as it involves recycled materials. This paper focuses on the potential of fabric gardening to improve heat insulation in vertical greening systems. This study first conducts a simulated experiment to compare the cooling effects of fabric gardening versus other vertical greening systems. Then we conducted an on-site investigation in Chiayi Industry Innovation Center by twice measuring the building’s temperatures, each lasting for a week. Results indicate that the temperature of the indoor wall was on average 0.9℃lower than the atmospheric temperature at the fabric garden. The temperature difference between the atmospheric temperature and indoor wall was 10.5℃and 2.8℃, respectively. Heat transmission was reduced by 73%. This indicates that fabric gardening holds much potential for application in systems aimed at heat insulation and air temperature regulation.
Ding, Dan. "Characterizing the Performance of a Single-layer Fabric System through a Heat and Mass Transfer Model." Master's thesis, 2010. http://hdl.handle.net/10048/906.
Повний текст джерелаSilva, Eva Carolina Ferreira da. "Thermal performance of additive manufacturing materials for hybrid moulds." Master's thesis, 2018. http://hdl.handle.net/1822/65006.
Повний текст джерелаHybrid moulds are an increasingly considered alternative for prototype series or short production runs, where the moulding inserts are produced by Additive Manufacturing (AM) in alternative materials, namely polymers. However, one of the main issues associated with the use of these materials is their thermal behaviour due, mainly, to the low thermal conductivity values. This study aims to evaluate the thermal performance of moulding inserts produced via Rapid Prototyping (RP) and conventional manufacturing techniques as well as the resulting moulded part quality, supported by Computer-Aided Engineering (CAE) simulations results, through Moldex3D software. The first part of this research was centered on the analysis and characterization of eight different materials from three different technologies (Material Jetting, Fused Deposition Modelling (FDM) and Direct Metal Laser Sintering (DMLS)) in order to define the suitable materials to apply in hybrid moulds. Therefore this first investigation permitted to narrow the Additive Manufacturing (AM) materials to just two polymeric materials that were further studied. Three insert materials and technologies were evaluated: Objet500 Connex3 using Digital ABS Thin Walls, Fortus 900mc using PPSF and machining using P20 steel. Dimensional accuracy, temperatures along the cycles, longevity of the moulding inserts, part quality and shrinkage behaviour of Polyoxymethylene (POM) mouldings were recorded. In the end, it was found that PPSF moulding inserts had worse surface finishing than Digital ABS Thin Walls, which originated parts with worse quality. However, Digital ABS Thin Walls was suitable for this application and using spray air as a complement of cooling decreased significantly the cycle time and had not any consequences in the shrinkage of the moulded parts.
Os moldes híbridos são uma alternativa cada vez mais procurada para a produção de protótipos ou séries curtas, onde os insertos moldantes são produzidos por manufatura aditiva, em materiais alternativos, nomeadamente polímeros. No entanto, uma das principais questões associadas ao uso destes materiais é a sua performance térmica, principalmente ao nível da condutividade. Este estudo pretende não só avaliar e comparar a performance térmica de insertos moldantes produzidos por prototipagem rápida e por técnicas de maquinação convencionais, como também a qualidade da peça resultante. Estes resultados foram validados por simulações CAE, através do software Moldex3D. Assim, numa primeira fase, a pesquisa focou-se em analisar e caracterizar oito materiais distintos, de três tecnologias distintas (Material Jetting, FDM e DMLS) para aplicação em moldes híbridos. Estes resultados permitiram selecionar dois materiais poliméricos de manufatura aditiva, que continuaram a ser estudados. Posteriormente, foram avaliadas três tecnologias e materiais: Objet500 Connex3 com Digital ABS Thin Walls, Fortus 900mc com PPSF e maquinação convencional com aço P20, ao nível da precisão dimensional, temperaturas ao longo dos ciclos e longevidade dos insertos moldantes e a qualidade e contração das peças produzidas em POM. No final, observou-se que os insertos moldantes em PPSF tiveram pior acabamento superficial, o que originou peças com pior qualidade do que usando Digital ABS Thin Walls. Contudo, este último mostrou-se uma boa solução para aplicação em moldes híbridos e usar ar comprimido como complemento de arrefecimento diminui significativamente o tempo de ciclo, não trazendo consequências na contração das moldações.
This work was funded by National Funds through FCT - Portuguese Foundation for Science and Technology, Reference UID/CTM/50025/2013 and FEDER funds through the COMPETE 2020 Programme under the project number POCI-01-0145-FEDER-007688 and by the European Structural and Investment Funds in the FEDER component, through the Operational Competitiveness and Internationalization Programme (COMPETE 2020) [Project nº 002814; Funding Reference: POCI-01-0247-FEDER-002814 and Project nº 002797; Funding Reference: POCI-01-0247-FEDER-002797].
Книги з теми "Fabric thermal performance"
ASTM Committee F-18 on Electrical Protective Equipment for Workers., ed. ASTM standards for determining the ignitability and arc thermal performance of clothing for use by workers exposed to thermal hazards of momentary electric arcs. West Conshohocken, Pa: ASTM, 1997.
Знайти повний текст джерелаЧастини книг з теми "Fabric thermal performance"
Su, Yun, Rui Li, Jie Yang, Guowen Song, Chunhui Xiang, and Jun Li. "Effect of Fabric Deformation on Thermal Protective Performance of Clothing in a Cylindrical Configuration." In Symposium on Homeland Security and Public Safety: Research, Applications and Standards, 271–85. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2019. http://dx.doi.org/10.1520/stp161420180059.
Повний текст джерелаMarsden, William H. "Thermal Performance of Wool and Inherently Flame-Retardant Fiber-Blend Fabrics." In ACS Symposium Series, 260–69. Washington, DC: American Chemical Society, 1991. http://dx.doi.org/10.1021/bk-1991-0457.ch016.
Повний текст джерелаPierce, John D., Stephen S. Hirsch, Sara Beth Kane, John A. Venafro, and Carole A. Winterhalter. "Evaluation of Thermal Comfort of Fabrics Using a Controlled-Environment Chamber." In Performance of Protective Clothing and Equipment: 9thVolume, Emerging Issues and Technologies, 108–28. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2012. http://dx.doi.org/10.1520/stp104100.
Повний текст джерелаPierce, John D., Stephen S. Hirsch, Sara Beth Kane, John A. Venafro, and Carole A. Winterhalter. "Evaluation of Thermal Comfort of Fabrics Using a Controlled-Environment Chamber." In Performance of Protective Clothing and Equipment: 9thVolume, Emerging Issues and Technologies, 1–21. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2012. http://dx.doi.org/10.1520/stp104100t.
Повний текст джерелаFitek, John, Margaret Auerbach, Thomas A. Godfrey, and Michael Grady. "High-Intensity Thermal Testing of Protective Fabrics with a CO2 Laser." In Performance of Protective Clothing and Equipment: 10th Volume, Risk Reduction Through Research and Testing, 159–77. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2016. http://dx.doi.org/10.1520/stp159320160004.
Повний текст джерелаMeulemans, Johann, Florent Alzetto, David Farmer, and Christopher Gorse. "QUB/e: A Novel Transient Experimental Method for in situ Measurements of the Thermal Performance of Building Fabrics." In Building Information Modelling, Building Performance, Design and Smart Construction, 115–27. Cham: Springer International Publishing, 2017. http://dx.doi.org/10.1007/978-3-319-50346-2_9.
Повний текст джерелаTorvi, David, Moein Rezazadeh, and Christopher Bespflug. "Effects of Convective and Radiative Heat Sources on Thermal Response of Single- and Multiple-Layer Protective Fabrics in Benchtop Tests." In Performance of Protective Clothing and Equipment: 10th Volume, Risk Reduction Through Research and Testing, 131–58. 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA 19428-2959: ASTM International, 2016. http://dx.doi.org/10.1520/stp159320160013.
Повний текст джерелаMeulemans, Johann. "An Assessment of the QUB/e Method for Fast In Situ Measurements of the Thermal Performance of Building Fabrics in Cold Climates." In Springer Proceedings in Energy, 317–26. Cham: Springer International Publishing, 2018. http://dx.doi.org/10.1007/978-3-030-00662-4_27.
Повний текст джерелаUeda, Hiroyuki, and George Havenith. "The effect of fabric air permeability on clothing ventilation." In Environmental Ergonomics - The Ergonomics of Human Comfort, Health and Performance in the Thermal Environment, 343–46. Elsevier, 2005. http://dx.doi.org/10.1016/s1572-347x(05)80054-0.
Повний текст джерелаCanan Çelikel, Dilan. "Smart E-Textile Materials." In Advanced Functional Materials. IntechOpen, 2020. http://dx.doi.org/10.5772/intechopen.92439.
Повний текст джерелаТези доповідей конференцій з теми "Fabric thermal performance"
Eshleman, Justin E., Robert A. Lake, and Ronald A. Coutu. "Enhancing the thermal performance of temporary fabric structures for the advanced energy efficient shelter system." In 2016 IEEE National Aerospace and Electronics Conference (NAECON) and Ohio Innovation Summit (OIS). IEEE, 2016. http://dx.doi.org/10.1109/naecon.2016.7856819.
Повний текст джерелаLi, Yunhong, Sun Xiaogang, Yunhong Li, Lian Jihong, and Liu Sa. "Research on Heat Conduction Performance of Carbon-Fibre Fabric based on Infrared Thermal Imaging Technology." In 2008 IEEE International Symposium on Knowledge Acquisition and Modeling Workshop. IEEE, 2008. http://dx.doi.org/10.1109/kamw.2008.4810419.
Повний текст джерелаVilarinho, Maria Cândida, Paulo Araújo, José Carlos Teixeira, Elisabete Silva, Dionisio Silveira, Delfim Soares, Maria C. Paiva, Daniel Ribeiro, and Marisa Branco. "Influence of Coating on High Performance Heat Resistant Textile Curtains." In ASME 2021 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/imece2021-73307.
Повний текст джерелаSahay, Chittaranjan, Suhash Ghosh, and Mathew Mormino. "Effect of Air Release Agents on Performance Results of Fabric Lined Bushings." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24464.
Повний текст джерелаHull, Frazier, Jett Gambill, Andrew Hansche, Gian Agni, John Evangelista, Celia Powell, Margaret Auerbach, Joel Dillon, and O¨zer Arnas. "Engineering an Undergarment for Flash/Flame Protection." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-63888.
Повний текст джерелаSaad, Messiha, Darryl Baker, and Rhys Reaves. "Thermal Characterization of Carbon-Carbon Composites." In ASME 2011 International Mechanical Engineering Congress and Exposition. ASMEDC, 2011. http://dx.doi.org/10.1115/imece2011-64061.
Повний текст джерелаEschen, Kevin, and Julianna Abel. "Effect of Geometric Design Parameters on Contractile SMA Knitted Actuator Performance." In ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems. American Society of Mechanical Engineers, 2017. http://dx.doi.org/10.1115/smasis2017-3926.
Повний текст джерелаLeonhardt, Darin, Thomas Beechem, Matthew Cannon, Nathaniel Dodds, Matthew Fellows, Thomas Grzybowski, Gad Haase, Thomas LeBoeuf, David Lee, and William Rice. "Impacts of Substrate Thinning on FPGA Performance and Reliability." In ISTFA 2021. ASM International, 2021. http://dx.doi.org/10.31399/asm.cp.istfa2021p0423.
Повний текст джерелаLi, Jiawen, Mingyi Chen, Li Li, Feng Liu, Yufei Gao, Jian Zhu, Jie Zhan, et al. "Preparation and Characterization of Radioactive Aerosol Protective Nanofiber Membranes." In 2022 29th International Conference on Nuclear Engineering. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/icone29-92665.
Повний текст джерелаMneimneh, Farah, Nesreen Ghaddar, Kamel Ghali, Charbel Moussalem, and Ibrahim Omeis. "Modeling the Effect of Cooling Vest on Body Thermal Response of People With Paraplegia During Exercise." In ASME 2019 Heat Transfer Summer Conference collocated with the ASME 2019 13th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ht2019-3474.
Повний текст джерелаЗвіти організацій з теми "Fabric thermal performance"
Kukuck, Scott, and Kuldeep Prasad. Thermal performance for fire-fighters' protective clothing. 3. simulating a TPP test for single-layered fabrics. Gaithersburg, MD: National Institute of Standards and Technology, 2003. http://dx.doi.org/10.6028/nist.ir.6993.
Повний текст джерелаConroy, Brittany, Tyler Klene, Luke Koppa, and Juyeon Park. Thermo-Physiological Comfort Assessment of Performance Cooling Fabrics in Medical Personal Protective Equipment (PPE). Ames: Iowa State University, Digital Repository, 2017. http://dx.doi.org/10.31274/itaa_proceedings-180814-321.
Повний текст джерела