Дисертації з теми "Experimental methods in fluid flow"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Experimental methods in fluid flow".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Fällman, Monika Carina. "Turbulence measurements in fiber suspension flows : experimental methods and results." Licentiate thesis, KTH, Mechanics, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-11460.
Повний текст джерелаTurbulent mixing is present in many pulp and paper processes. It is a particularly important factor in the design and improvements of the paper machine headbox, influencing the final paper structure. During this project, experimental methods to quantify the effect of fibers on turbulent suspension flows have been developed, and then used for studying turbulent mixing in fiber suspensions. A technique that uses microprobes to measure passive scalar mixing of salt for the characterization of turbulent fluctuations in a fiber suspension flow has been developed: Conductivity micro-probes have been built and turbulence measurements have been performed in simple jet and wake flows, studying turbulent mixing between the two streams of pulp suspension, of which one has been doped with salt. A relatively new technique to measure fluid velocity non-intrusively in opaque fluids has also been tested. The technique makes use of ultrasonic pulses to obtain velocity information through the Doppler-shift of reflected pulses. The main efforts reported on in the thesis are focused on method design and development as well as method evaluation.
Peña, Monferrer Carlos. "Computational fluid dynamics multiscale modelling of bubbly flow. A critical study and new developments on volume of fluid, discrete element and two-fluid methods." Doctoral thesis, Universitat Politècnica de València, 2017. http://hdl.handle.net/10251/90493.
Повний текст джерелаEl estudio y modelado de flujos bifásicos, incluso los más simples como el bubbly flow, sigue siendo un reto que conlleva aproximarse a los fenómenos físicos que lo rigen desde diferentes niveles de resolución espacial y temporal. El uso de códigos CFD (Computational Fluid Dynamics) como herramienta de modelado está muy extendida y resulta prometedora, pero hoy por hoy, no existe una única aproximación o técnica de resolución que permita predecir la dinámica de estos sistemas en los diferentes niveles de resolución, y que ofrezca suficiente precisión en sus resultados. La dificultad intrínseca de los fenómenos que allí ocurren, sobre todo los ligados a la interfase entre ambas fases, hace que los códigos de bajo o medio nivel de resolución, como pueden ser los códigos de sistema (RELAP, TRACE, etc.) o los basados en aproximaciones 3D TFM (Two-Fluid Model) tengan serios problemas para ofrecer resultados aceptables, a no ser que se trate de escenarios muy conocidos y se busquen resultados globales. En cambio, códigos basados en alto nivel de resolución, como los que utilizan VOF (Volume Of Fluid), requirieren de un esfuerzo computacional tan elevado que no pueden ser aplicados a sistemas complejos. En esta tesis, mediante el uso de la librería OpenFOAM se ha creado un marco de simulación de código abierto para analizar los escenarios desde niveles de resolución de microescala a macroescala, analizando las diferentes aproximaciones, así como la información que es necesaria aportar en cada una de ellas, para el estudio del régimen de bubbly flow. En la primera parte se estudia la dinámica de burbujas individuales a un alto nivel de resolución mediante el uso del método VOF (Volume Of Fluid). Esta técnica ha permitido obtener resultados precisos como la formación de la burbuja, velocidad terminal, camino recorrido, estela producida por la burbuja e inestabilidades que produce en su camino. Pero esta aproximación resulta inviable para entornos reales con la participación de más de unas pocas decenas de burbujas. Como alternativa, se propone el uso de técnicas CFD-DEM (Discrete Element Methods) en la que se representa a las burbujas como partículas discretas. En esta tesis se ha desarrollado un nuevo solver para bubbly flow en el que se han añadido un gran número de nuevos modelos, como los necesarios para contemplar los choques entre burbujas o con las paredes, la turbulencia, la velocidad vista por las burbujas, la distribución del intercambio de momento y masas con el fluido en las diferentes celdas por cada una de las burbujas o la expansión de la fase gaseosa entre otros. Pero también se han tenido que incluir nuevos algoritmos como el necesario para inyectar de forma adecuada la fase gaseosa en el sistema. Este nuevo solver ofrece resultados con un nivel de resolución superior a los desarrollados hasta la fecha. Siguiendo con la reducción del nivel de resolución, y por tanto los recursos computacionales necesarios, se efectúa el desarrollo de un solver tridimensional de TFM en el que se ha implementado el método QMOM (Quadrature Method Of Moments) para resolver la ecuación de balance poblacional. El solver se desarrolla con los mismos modelos de cierre que el CFD-DEM para analizar los efectos relacionados con la pérdida de información debido al promediado de las ecuaciones instantáneas de Navier-Stokes. El análisis de resultados de CFD-DEM permite determinar las discrepancias encontradas por considerar los valores promediados y el flujo homogéneo de los modelos clásicos de TFM. Por último, como aproximación de nivel de resolución más bajo, se investiga el uso uso de códigos de sistema, utilizando el código RELAP5/MOD3 para analizar el modelado del flujo en condiciones de bubbly flow. El código es modificado para reproducir correctamente el flujo bifásico en tuberías verticales, comparando el comportamiento de aproximaciones para el cálculo del término d
L'estudi i modelatge de fluxos bifàsics, fins i tot els més simples com bubbly flow, segueix sent un repte que comporta aproximar-se als fenòmens físics que ho regeixen des de diferents nivells de resolució espacial i temporal. L'ús de codis CFD (Computational Fluid Dynamics) com a eina de modelatge està molt estesa i resulta prometedora, però ara per ara, no existeix una única aproximació o tècnica de resolució que permeta predir la dinàmica d'aquests sistemes en els diferents nivells de resolució, i que oferisca suficient precisió en els seus resultats. Les dificultat intrínseques dels fenòmens que allí ocorren, sobre tots els lligats a la interfase entre les dues fases, fa que els codis de baix o mig nivell de resolució, com poden ser els codis de sistema (RELAP,TRACE, etc.) o els basats en aproximacions 3D TFM (Two-Fluid Model) tinguen seriosos problemes per a oferir resultats acceptables , llevat que es tracte d'escenaris molt coneguts i se persegueixen resultats globals. En canvi, codis basats en alt nivell de resolució, com els que utilitzen VOF (Volume Of Fluid), requereixen d'un esforç computacional tan elevat que no poden ser aplicats a sistemes complexos. En aquesta tesi, mitjançant l'ús de la llibreria OpenFOAM s'ha creat un marc de simulació de codi obert per a analitzar els escenaris des de nivells de resolució de microescala a macroescala, analitzant les diferents aproximacions, així com la informació que és necessària aportar en cadascuna d'elles, per a l'estudi del règim de bubbly flow. En la primera part s'estudia la dinàmica de bambolles individuals a un alt nivell de resolució mitjançant l'ús del mètode VOF. Aquesta tècnica ha permès obtenir resultats precisos com la formació de la bambolla, velocitat terminal, camí recorregut, estela produida per la bambolla i inestabilitats que produeix en el seu camí. Però aquesta aproximació resulta inviable per a entorns reals amb la participació de més d'unes poques desenes de bambolles. Com a alternativa en aqueix cas es proposa l'ús de tècniques CFD-DEM (Discrete Element Methods) en la qual es representa a les bambolles com a partícules discretes. En aquesta tesi s'ha desenvolupat un nou solver per a bubbly flow en el qual s'han afegit un gran nombre de nous models, com els necessaris per a contemplar els xocs entre bambolles o amb les parets, la turbulència, la velocitat vista per les bambolles, la distribució de l'intercanvi de moment i masses amb el fluid en les diferents cel·les per cadascuna de les bambolles o els models d'expansió de la fase gasosa entre uns altres. Però també s'ha hagut d'incloure nous algoritmes com el necessari per a injectar de forma adequada la fase gasosa en el sistema. Aquest nou solver ofereix resultats amb un nivell de resolució superior als desenvolupat fins la data. Seguint amb la reducció del nivell de resolució, i per tant els recursos computacionals necessaris, s'efectua el desenvolupament d'un solver tridimensional de TFM en el qual s'ha implementat el mètode QMOM (Quadrature Method Of Moments) per a resoldre l'equació de balanç poblacional. El solver es desenvolupa amb els mateixos models de tancament que el CFD-DEM per a analitzar els efectes relacionats amb la pèrdua d'informació a causa del promitjat de les equacions instantànies de Navier-Stokes. L'anàlisi de resultats de CFD-DEM permet determinar les discrepàncies ocasionades per considerar els valors promitjats i el flux homogeni dels models clàssics de TFM. Finalment, com a aproximació de nivell de resolució més baix, s'analitza l'ús de codis de sistema, utilitzant el codi RELAP5/MOD3 per a analitzar el modelatge del fluxos en règim de bubbly flow. El codi és modificat per a reproduir correctament les característiques del flux bifàsic en canonades verticals, comparant el comportament d'aproximacions per al càlcul del terme de drag basades en velocitat de drift flux model i de les basades en coe
Peña Monferrer, C. (2017). Computational fluid dynamics multiscale modelling of bubbly flow. A critical study and new developments on volume of fluid, discrete element and two-fluid methods [Tesis doctoral no publicada]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/90493
TESIS
Sandlin, Matthew. "An experimental and numerical study of granular hopper flows." Thesis, Georgia Institute of Technology, 2013. http://hdl.handle.net/1853/50318.
Повний текст джерелаBuchenberg, Waltraud [Verfasser], and Jürgen [Akademischer Betreuer] Hennig. "Development of experimental methods to measure temperature fields and velocity fields in fluid flows using Magnetic Resonance Imaging." Freiburg : Universität, 2016. http://d-nb.info/1122831404/34.
Повний текст джерелаBello, Kelani. "Modeling multiphase solid transport velocity in long subsea tiebacks : numerical and experimental methods." Thesis, Robert Gordon University, 2013. http://hdl.handle.net/10059/3138.
Повний текст джерелаRodriguez, de Castro Antonio. "Flow experiments of yield stress fluids in porous media as a new porosimetry method." Thesis, Paris, ENSAM, 2014. http://www.theses.fr/2014ENAM0021/document.
Повний текст джерелаCurrent experimental methods used to determine pore size distributions (PSD)of porous media present several drawbacks such as toxicity of the employed fluids (e.g., mercury porosimetry). The theoretical basis of a new method to obtain the PSD by injecting yield stress fluids through porous media and measuring the flow rate Q at several pressure gradients ∇P was proposed in the literature. On the basis of these theoretical considerations,an intuitive approach to obtain PSD from Q(∇P) is presented in this work. It relies on considering the extra increment of Q when ∇P is increased, as a consequence of the pores of smaller radius newly incorporated to the flow. This procedure is first tested and validated on numerically generated experiments. Then, it is applied to exploit data coming from laboratory experiments and the obtained PSDs are compared to those deduced by mercury porosimetry and micro tomography
Rodrigues, Romulo Luis de Paiva. "Caracterização experimental do escoamento bifásico de gás-líquido descendente em golfadas em tubulações levemente inclinadas." Universidade Tecnológica Federal do Paraná, 2015. http://repositorio.utfpr.edu.br/jspui/handle/1/1307.
Повний текст джерелаO escoamento de gás-líquido descendente, no padrão golfadas é frequentemente encontrado em linhas de produção de petróleo provocado pela topografia do terreno. Assim, é necessário entender a dinâmica deste tipo de escoamento para o projeto de linhas de produção de óleo e gás, assim como para o dimensionamento de separadores e equipamentos. Neste cenário, no presente trabalho é caraterizado experimentalmente o escoamento bifásico de líquido-gás no padrão intermitente na direção descendente, em tubulações com inclinações de 0°, −4°, −7°, −10° e −13°. O estudo foi realizado utilizando o circuito experimental instalado no NUEM/UTFPR. Os experimentos foram conduzidos para diferentes condições de vazão de líquido e gás que garantam o padrão intermitente em golfadas, e para a monitoração das estruturas (fases) do escoamento foi utilizado um par de sensores de malha de eletrodos. A partir dos sinais temporais da fração de vazio adquiridos, foram extraídas as distribuições estatísticas dos parâmetros característicos do escoamento em golfadas, sendo estes: a velocidade de translação da bolha alongada, a frequência de passagem da célula unitária, o comprimento do pistão de líquido, o comprimento da bolha alongada e a fração de vazio na região da bolha alongada. Em posse dos dados experimentais processados, estes foram analisados com a finalidade de identificar a relação entre os parâmetros do escoamento em golfadas, tanto para suas distribuições estatísticas como para seu valor médio, com as vazões e propriedade dos fluidos. Foram elaboradas correlações, com intervalo de confiança de 95%, para calcular a frequência, velocidade da bolha alongada, comprimentos do pistão e da bolha, fração do líquido e de vazio; que certamente servirão de referência para o desenvolvimento de modelos matemáticos e desenvolvimento de projetos de engenharia.
Downward slug flow in ducts of circular cross section is a frequently observed flow regime in oil and gas transportation lines. The onset of this kind of flow is due to instabilities generated by irregular pipe topography. Therefore, to understand the hydrodynamics of the slug flow is paramount in the design of crude oil production lines as well as in the project of equipment involved in oil and gas operations. The goal of this work is to experimentally analyze and characterize the two-phase gas-liquid intermittent downward flow in ducts with inclination angles of 0°, −4°, −7°, −10° and −13°. The analysis was performed at different gas-liquid volumetric flow rates for which the slug flow regime was observed. An existing experimental rig in the NUEM/UTFPR labs was used to collect data. A pair of wire-mesh sensors to evaluate the flow structure, thus obtaining void fraction temporal series was employed. From those series, statistical distributions for the characteristic parameters of such slug flows – namely the elongated bubble translational velocity, the unit cell frequency, the liquid slug and the elongated bubble lengths and the void fraction in the elongated bubble region – were obtained. The processed signals were analyzed so as to identify the relationship between the slug flow parameters, their statistical distributions and averaged values alike as functions of the flow rates and fluid properties. Correlations for slug frequency, elongated bubble velocity, liquid slug and bubble lengths as well as empirical expressions for the void and liquid fractions were developed, all within a confidence interval of 95%. It is expected that such correlations may contribute to the betterment of future engineering endeavours, and used in the development of similar mathematical models.
Hasnaoui, Abdennebi el. "Introduction aux methodes de raccordement : application a la modelisation d'ecoulement central de convection naturelle dans une piece d'habitation." Toulouse 3, 1987. http://www.theses.fr/1987TOU30141.
Повний текст джерелаHellou, Mustapha. "Etude numérique et expérimentale de l'écoulement à structure cellulaire engendré par la rotation d'un cylindre dans un canal." Poitiers, 1988. http://www.theses.fr/1988POIT2267.
Повний текст джерелаRetailleau, Alain. "Validation expérimentale d'une méthode de prédiction de l'érosion par cavitation." Université Joseph Fourier (Grenoble), 1995. http://www.theses.fr/1995GRE10050.
Повний текст джерелаLe, Xuan Minh Philippe. "Contribution a l'etude des problemes mecaniques et thermiques engendres par la circulation fluide dans un amortisseur." Paris 6, 1987. http://www.theses.fr/1987PA066183.
Повний текст джерелаThomas, François. "Contribution a l'etude des performances d'une petite turbine de suralimentation en regime stationnaire." Paris, ENSAM, 1987. http://www.theses.fr/1987ENAM0015.
Повний текст джерелаMaalouf, Abdellah. "Etude numérique et expérimentale de l'écoulement plan autour et au travers d'un cylindre, à faibles nombres de Reynolds : modélisaton d'un milieu poreux par des treillis de cylindres." Poitiers, 1987. http://www.theses.fr/1987POIT2032.
Повний текст джерелаBadcock, Kenneth John. "Application of numerical methods to transient compressible fluid flow." Thesis, University of Oxford, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.306540.
Повний текст джерелаAkbari, Mohammad Hadi. "Bluff-body flow simulations using vortex methods." Thesis, National Library of Canada = Bibliothèque nationale du Canada, 1999. http://www.collectionscanada.ca/obj/s4/f2/dsk3/ftp04/nq55294.pdf.
Повний текст джерелаLiu, Hongwei. "Gas-kinetic methods for viscous fluid flows /." View abstract or full-text, 2007. http://library.ust.hk/cgi/db/thesis.pl?MATH%202007%20LIU.
Повний текст джерелаGong, Jing. "Hybrid Methods for Unsteady Fluid Flow Problems in Complex Geometries." Doctoral thesis, Uppsala universitet, Avdelningen för teknisk databehandling, 2007. http://urn.kb.se/resolve?urn=urn:nbn:se:uu:diva-8341.
Повний текст джерелаJansson, Niclas. "High performance adaptive finite element methods for turbulent fluid flow." Licentiate thesis, KTH, Numerisk analys, NA, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-30277.
Повний текст джерелаQC 20110223
Coggins, Patrick. "Mixed hp-finite element methods for viscous incompressible fluid flow." Thesis, University of Leicester, 2000. http://hdl.handle.net/2381/30511.
Повний текст джерелаYi, Wei. "Cartesian grid methods for viscoelastic fluid flow in complex geometry." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/cartesian-grid-methods-for-viscoelastic-fluid-flow-in-complex-geometry(57b59bc9-4dc8-4698-a945-fc170c8e56e0).html.
Повний текст джерелаChinchapatnam, Phani P. "Radial basis function based meshless methods for fluid flow problems." Thesis, University of Southampton, 2006. https://eprints.soton.ac.uk/72034/.
Повний текст джерелаGray, Nicola J. "Experimental methods for visualizing flow through porous materials." Thesis, University of Warwick, 2002. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.248065.
Повний текст джерелаBanieghbal, M. R. "Experimental and theoretical analysis of flow characteristics of servo-valve orifices under steady and unsteady flow." Thesis, Liverpool John Moores University, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.354890.
Повний текст джерелаGilbertson, Mark. "Mixing in multiphase jet flow : experimental comparison with a computational model." Thesis, University of Oxford, 1993. http://ora.ox.ac.uk/objects/uuid:98fae523-d738-4392-8b63-ab9cfbeaf37b.
Повний текст джерелаBrown, Jason Britton. "An experimental facility for the investigation of the flow in a circular-couette flow bioreactor." Thesis, Georgia Institute of Technology, 1998. http://hdl.handle.net/1853/18174.
Повний текст джерелаBrackbill, Tim. "Experimental investigation on the effects of surface roughness on microscale liquid flow /." Online version of thesis, 2008. http://hdl.handle.net/1850/6136.
Повний текст джерелаSalleh, M. N. B. "Numerical and experimental investigations of flow around bends in open channels." Thesis, University of Strathclyde, 1985. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.371354.
Повний текст джерелаMallory, David A. "Experimental investigation of non-uniform flow past propellers." Thesis, Virginia Polytechnic Institute and State University, 1985. http://hdl.handle.net/10919/101447.
Повний текст джерелаM.S.
Mithrush, Troy Lindsay. "An experimental study of fluid flow in a low consistency refiner." Thesis, University of British Columbia, 2013. http://hdl.handle.net/2429/45661.
Повний текст джерелаKeegan, Fiona. "Experimental investigation into non-Newtonian fluid flow through gradual contraction geometries." Thesis, University of Liverpool, 2009. http://livrepository.liverpool.ac.uk/1293/.
Повний текст джерелаKiss, Tibor. "Experimental and numerical investigation of transonic turbine cascade flow." Diss., This resource online, 1992. http://scholar.lib.vt.edu/theses/available/etd-02022007-133636/.
Повний текст джерелаFernandes, Aurelio. "Time multigrid methods and D-adaptivity for coupled fluid flow solvers." Thesis, Cranfield University, 2002. http://hdl.handle.net/1826/3519.
Повний текст джерелаPuigferrat, Pérez Albert. "Finite element methods for advection-diffusion-absorption and fluid flow problems." Doctoral thesis, Universitat Politècnica de Catalunya, 2021. http://hdl.handle.net/10803/672334.
Повний текст джерелаEl objetivo de la tesis es desarrollar una herramienta numérica para describir cómo cambia la concentración de una o más sustancias distribuidas en un medio fluido bajo el efecto de tres procesos de transporte: advección, difusión y absorción. Para ello, es fundamental conocer la interacción de la sustancia transportada con el medio fluido. La tesis pretende extender métodos numéricos estabilizados para resolver las ecuaciones de transporte y flujo de fluidos de manera acoplada para una mayor precisión, eficiencia y velocidad a la hora de predecir el movimiento de las sustancias transportadas en el fluido. Se hace hincapié en el transporte de sustancias en fluidos con números de Péclet elevados. La motivación práctica del trabajo es predecir el transporte de un contaminante en el aire en entornos urbanos. El documento de tesis resume la investigación publicada en tres artículos publicados en revistas de alto impacto del JCR en los cuales el autor de la tesis también es el primer autor. Los trabajos se adjuntan al documento en los capítulos correspondientes. La descripción de los desarrollos de tesis se ha organizado de la siguiente manera. En primer lugar, presentamos la investigación realizada en la tesis para el desarrollo de una formulación generalizada estabilizada de cálculo de incrementos finitos - método de elementos finitos (FIC--FEM) para resolver la ecuación transitoria multidimensional advección-difusión-absorción. El punto de partida son las ecuaciones que gobiernan los problemas multidimensionales estacionarios de advección-difusión-absorción y los problemas de advección-difusión-absorción unidimensionales transitorios obtenidos mediante el procedimiento FIC. El buen comportamiento de la nueva formulación FIC--FEM se muestra en varios ejemplos de aplicación. Este trabajo fue publicado en el primero de los tres artículos mencionados. En el siguiente capítulo presentamos un método numérico innovador para resolver problemas de transporte con altos valores de advección y / o absorción. Se ha desarrollado un enfoque lagrangiano basado en la versión actualizada del método clásico de elementos finitos de partículas (PFEM) para calcular la advección de sustancias en fluidos, mientras que se adopta una estrategia euleriana basada en la formulación estabilizada FIC--FEM para calcular los efectos de difusión y absorción. El nuevo enfoque semilagrangiano ha sido validado mediante su aplicación en una serie de ejemplos académicos de transporte de sustancias para diferentes valores de los números de Péclet y Damköhler. Finalmente, derivamos un procedimiento para acoplar las ecuaciones de fluido y transporte para modelar la distribución de un contaminante en una calle. En nuestro caso, hemos considerado el carbono negro (BC) como contaminante. La evolución del flujo de fluido se calcula con un método estándar de elementos finitos estabilizados utilizando la técnica Quasi-Static Variational Multiscale (QS-VMS). Para la temperatura y el transporte de contaminantes utilizamos el procedimiento semilagrangiano desarrollado en la tesis. Se han resuelto varios ejemplos de aplicación para ilustrar la precisión y viabilidad de la herramienta numérica propuesta para predecir el transporte de un contaminante en el aire en entornos urbanos. Uno de los ejemplos se presenta en el tercer artículo, mientras que otro académico se presenta en el apéndice de este documento.
Enginyeria civil
Kuehtz, Silvana. "Experimental investigation of oscillatory flow around circular cylinders at low β numbers". Thesis, Imperial College London, 1996. http://hdl.handle.net/10044/1/8866.
Повний текст джерелаToombes, Luke. "Experimental study of air-water flow properties on low-gradient stepped cascades /." St. Lucia, Qld, 2002. http://www.library.uq.edu.au/pdfserve.php?image=thesisabs/absthe16746.pdf.
Повний текст джерелаClarke, Nicholas Richard. "Two dimensional flow simulation using discrete vortex methods on MIND processor arrays." Thesis, University of Southampton, 1992. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.336148.
Повний текст джерелаHussain, Liaqat Ali. "The experimental and theoretical analysis of pipe contraction flow fields." Thesis, Kingston University, 1990. http://eprints.kingston.ac.uk/20538/.
Повний текст джерелаBrunner, Matthew D. "Experimental and computational investigation of flow in a transonic compressor inlet." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 2005. http://library.nps.navy.mil/uhtbin/hyperion/05Sep%5FBrunner.pdf.
Повний текст джерелаLee, Long. "Immersed interface methods for incompressible flow with moving interfaces /." Thesis, Connect to this title online; UW restricted, 2002. http://hdl.handle.net/1773/6789.
Повний текст джерелаAlfred, Dicman. "Modeling fluid flow through single fracture using experimental, stochastic, and simulation approaches." Texas A&M University, 2003. http://hdl.handle.net/1969.1/324.
Повний текст джерелаPark, Jinyong. "Experimental and Numerical Investigations of Fluid Flow for Natural Single Rock Fractures." Diss., Tucson, Arizona : University of Arizona, 2005. http://etd.library.arizona.edu/etd/GetFileServlet?file=file:///data1/pdf/etd/azu%5Fetd%5F1385%5F1%5Fm.pdf&type=application/pdf.
Повний текст джерелаBryan, Grant T. "EXPERIMENTAL AND COMPUTATIONAL FLUID DYNAMIC ANALYSIS OF AXIAL-FLOW HYDRODYNAMIC POWER TURBINE." Monterey, California. Naval Postgraduate School, 2013. http://hdl.handle.net/10945/32801.
Повний текст джерелаHarrison, J. A. "The computer modelling and experimental studies of fluid flow in a plenum chamber." Thesis, University of East London, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.374070.
Повний текст джерелаFallenius, Bengt. "A new experimental setup for studies on wake flow instability and its control." Licentiate thesis, Stockholm : Skolan för teknikvetenskap, Kungliga Tekniska högskolan, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-10394.
Повний текст джерелаBjøntegaard, Tormod. "High order methods for incompressible fluid flow: Application to moving boundary problems." Doctoral thesis, Norwegian University of Science and Technology, Department of Mathematical Sciences, 2008. http://urn.kb.se/resolve?urn=urn:nbn:no:ntnu:diva-2232.
Повний текст джерелаAbushaikha, Ahmad Sami. "Numerical methods for modelling fluid flow in highly heterogeneous and fractured reservoirs." Thesis, Imperial College London, 2013. http://hdl.handle.net/10044/1/25110.
Повний текст джерелаShimizu, Yuma. "Enhanced Particle Methods with Highly-Resolved Phase Boundaries for Incompressible Fluid Flow." Kyoto University, 2019. http://hdl.handle.net/2433/244528.
Повний текст джерелаAyres, Thomas J. "Experimental methods to analyse crankcase aerodynamic losses and flow fields." Thesis, Edith Cowan University, Research Online, Perth, Western Australia, 2022. https://ro.ecu.edu.au/theses/2500.
Повний текст джерелаBice, Jonathon Ray. "Experimental investigation of a meso-scale axial flow pump." To access this resource online via ProQuest Dissertations and Theses @ UTEP, 2009. http://0-proquest.umi.com.lib.utep.edu/login?COPT=REJTPTU0YmImSU5UPTAmVkVSPTI=&clientId=2515.
Повний текст джерелаKhyyer, Abbas. "Improved Particle Methods by Refined Differential Operator Models for Free-Surface Fluid Flows." 京都大学 (Kyoto University), 2008. http://hdl.handle.net/2433/66215.
Повний текст джерела0048
新制・課程博士
博士(工学)
甲第14147号
工博第2981号
新制||工||1442(附属図書館)
26453
UT51-2008-N464
京都大学大学院工学研究科都市環境工学専攻
(主査)教授 後藤 仁志, 教授 細田 尚, 准教授 牛島 省
学位規則第4条第1項該当