Зміст
Добірка наукової літератури з теми "Errore geometrico"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Errore geometrico".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Errore geometrico"
1
Hoang, Trung Kien, and Nguyen Minh Duc Ta. "Machining Based Geometric Error Estimation Method for 3-Axis CNC Machine." Applied Mechanics and Materials 889 (March 2019): 469–74. http://dx.doi.org/10.4028/www.scientific.net/amm.889.469.
Повний текст джерелаАнотація:
Computer numerical control (CNC) machine tool plays an extremely significant role in any manufacturing industry due to its automation and high accuracy. Keeping the CNC machine tool at its highest performance to meet the demand of high accuracy machining is always significant. To maintain the accuracy of a machine tool over the time, it is important to measure and compensate the geometric error, one of the main error source of machine tool, especially when the machine get old. There are totally 21 geometrical errors in a 3-axis machine tool including three translational errors and three rotational errors for each axis and three perpendicular error (Squareness) within three axes of the machine. This paper presents an economical and simple method for measuring the geometric error of a 3-axis CNC machine tool based on the machining of actual samples. Three samples for each axis will be machined following a design cutting path. The samples will then be measured using a coordinate measuring machine (CMM). The collect data will be used for estimating the geometric errors. The volumetric errors will be then computed and verified through machining of 3D geometries.
2
Liu, Junfeng, Yuqian Zhao, Tao Lai, Fei Li, and Kexian Liu. "Identification of Geometrical Error on Multi-Axis Machine Tools Based on a Laser Tracker." Journal of Physics: Conference Series 2185, no. 1 (2022): 012008. http://dx.doi.org/10.1088/1742-6596/2185/1/012008.
Повний текст джерелаАнотація:
Abstract The geometrical errors are affected by many factors for a multi-axis machine tool, such as materials, manufacturing, assembly, measurement, control, and environmental. The geometric error will eventually be reflected in the accuracy of the workpiece; therefore, for each part of the machine tool, the measurement of geometric error is essential. Most geometrical errors are measured separately for each axis. The single geometrical error measurement method is time-consuming. The multiple geometric error measurement methods have some limitations based on different instruments. Laser tracker based on GPS (Global Positioning System) positioning principle can measure the dimensional coordinate. Thus, the laser tracker measured geometric errors in high efficiency, high precision, wide range. This paper introduces the method of measuring the multi-axis machine geometrical error by using a laser tracker with a 1280mm×1280mm×240mm range and compares the measurement result from the traditional method. The results show the laser tracker method has high measurement accuracy, and rapid measurement and compensation of geometrical errors are achievable on a large-stroke machine tools.
3
Jian, Yi, Qian Qian Li, Hong Cheng, Bin Wu Lai, and Jian Fei Zhang. "Research on Geometric Error Compensating Technique of CNC P3G Grinding Machine." Advanced Materials Research 462 (February 2012): 287–94. http://dx.doi.org/10.4028/www.scientific.net/amr.462.287.
Повний текст джерелаАнотація:
Kinematic accuracy is a key reason which influence workpiece's geometric error precision on traditional working process of precisely CNC（Computerized Numerical Control）P3G（polygon profile with 3 lobes） grinding machine. A systematic geometric error model has been presented for CNC P3G grinding machine， proposed multi-body system theory integrate with the structure of CNC P3G grinding machine tools, researched on the machine's space geometric errors. By means of separate geometric errors from the machine tools, build geometric mathematical error model. Then, identify 21 error parameters through method of 9 lines, analysis and calculate the total space geometric errors of the workpiece and wheel. Finally, formed a parameter-list and applied software error compensational technique ， achieved real-time control to the motions of workpiece and wheel. Experimental results shown that the geometrical error modeling technique is accurate and efficient, and the precision of CNC P3G grinding machine is highly raised 70%.
4
Jiang, Chuang, Huiliang Wang, Tianhao Han, and Xing Liu. "Simulation and Compensation of Axial Geometric Errors for Cycloidal Gears Based on Form Grinding." Mathematical Problems in Engineering 2022 (April 21, 2022): 1–16. http://dx.doi.org/10.1155/2022/4804498.
Повний текст джерелаАнотація:
To increase quality, reduce cycloidal gear noise, and avoid unnecessary vibration and shock, a compensation of axial geometric errors method is proposed based on the cycloidal gear form grinding. In the process of machining cycloidal gears, the relative position relationship between the grinding wheel and workpiece is affected by geometric errors of the motion axes, which has serious effects on the surface accuracy of the cycloidal gears. Combined with cycloidal gear form grinding kinematic principles, a geometric error model for each axis of a four-axis computer numerical control form grinding machine is established. By changing the compensation value of the geometrical errors on six degrees of freedom, the error of the cycloid gear tooth surface machined is obtained. Based on a sensitivity analysis of geometrical errors of each axis, the corrections are determined through an optimization process that targets the minimization of the tooth flank errors. The geometric errors of each axis of the cycloid gear grinding machine are compensated, and then, the cycloid gears produced by the machine are processed. Through the processing experiment, the error data of the actual processing before and after the compensation are compared, which indicates that the machining accuracy of the cycloid gear grinding machine is obviously improved. It has an important guiding significance in improving the precision and performance of large CNC form gear grinding machines.
5
Yu, Yongjian, Guoding Chen, Jishun Li, Yujun Xue, and Bitao Pang. "Prediction Method for the Radial Runout of Inner Ring in Cylindrical Roller Bearings." Mathematical Problems in Engineering 2017 (2017): 1–13. http://dx.doi.org/10.1155/2017/6584561.
Повний текст джерелаАнотація:
The motion error of assembled bearing depends on the geometric profile of bearing components. Therefore, it is crucial to establish the relationship between geometric error of bearing components and motion error of assembled bearing, which contributes to improving the rotational accuracy of assembled bearing in the design and machining of the bearing. The main purpose of this research is to propose an accurate method for predicting the radial runout of inner ring based on the geometrical constraint model of cylindrical roller bearings. In the geometrical constraint model, dimension and form errors in the inner raceway, the outer raceway, and rollers are considered, and the change of contact positions between the raceways and rollers caused by geometric errors of bearing components is taken into account. This method could predict the radial runout of inner ring after bearing components with geometric error are assembled. In order to testify the validity of the proposed prediction method, two particular cases in which the profiles of the inner raceway are circle and ellipse are selected, and the analysis algorithms for the radial runout of inner ring are derived. Two analytical results obtained from the analysis algorithms validate accuracy and effectiveness of the proposed prediction method.
6
Conte, Javier, Jorge Santolaria, Ana Cristina Majarena, Agustin Brau, and Juan Jose Aguilar Martín. "Laser Tracker Error Modeling and Kinematic Calibration Strategy." Key Engineering Materials 615 (June 2014): 63–69. http://dx.doi.org/10.4028/www.scientific.net/kem.615.63.
Повний текст джерелаАнотація:
Calibration of Laser Tracker systems is based most times in the determination of its geometrical errors. Some standards as the ASME B89.4.19 [1] and the VDI 2617-10 [2] describe different tests to calculate the geometric misalignments that cause systematic errors in Laser Tracker measurements. These errors are caused not only because of geometrical misalignments and other sources of error must also be taken in count. In this work we want to state the errors in a kinematic form. Errors will be split in two different components, geometric and kinematic errors. The first ones depend on the offsets, tilts and eccentricity of the mechanical and optical components of the system. Kinematic errors are different for every position of the Laser tracker, so they will be formulated as functions of three system variables: distance (R), vertical angle (V) and horizontal angle (H) usually called d, φ and θ. The goal of this work is to set up an evaluation procedure to determine geometric and kinematic errors of Laser Trackers.
7
Gu¨ven, H. M., and R. B. Bannerot. "Derivation of Universal Error Parameters for Comprehensive Optical Analysis of Parabolic Troughs." Journal of Solar Energy Engineering 108, no. 4 (1986): 275–81. http://dx.doi.org/10.1115/1.3268106.
Повний текст джерелаАнотація:
A study is presented where potential optical errors in parabolic troughs are divided into two groups: random and nonrandom. It is shown that the intercept factor is a function of both random and nonrandom errors as well as geometric parameters such as concentration ratio and rim angle. Three error parameters, universal to all collector geometries, that is, “universal” error parameters which combine random and nonrandom errors with collector geometric parameters, are derived analytically. The mathematical derivation of these universal error parameters is presented. A numerical technique, a detailed ray-trace computer routine which maps rays from elemental reflector surfaces to the absorber surface, is used to validate the existence of the universal error parameters. The universal error parameters are made up of one universal random error parameter, σ* ( =σC), and two universal nonrandom error parameters, β* ( = βC) and d* (=(dr)y/D). The use of universal error parameters for comprehensive optical analysis of troughs is also presented.
8
Wang, Xiu Shan, Yan Li, and Yong Chang Yu. "Study of the Geometrical Error Modeling of NC Lathe Based on Multi-Body System Theory." Advanced Materials Research 139-141 (October 2010): 1093–96. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1093.
Повний текст джерелаАнотація:
The geometrical error modeling of the numerically controlled (NC) lathe is the key technique to kinematics design, precision analysis and error compensation. The study gives out the modeling process of the generally geometrical error model based on the multi-body system theory for the multi-axis NC machine tools. By the multi-system theory, using the low series body arrays to describe the complex mechanical system, the article has finished the geometrical error modeling of the numerically controlled lathe, analyzed the influence on the model of error of perpendicularity between the linear axes. The modeling method is highly-efficient and can not be affected by the structure of the NC machine tools. The error compensation and command correction can be implemented by the geometric errors model.
9
Utami, Ratih Ayu. "Analisis Kesalahan Siswa SMP dalam Menyelesaikan Soal Bangun Ruang." MATHEdunesa 9, no. 3 (2020): 487–94. http://dx.doi.org/10.26740/mathedunesa.v9n3.p487-494.
Повний текст джерелаАнотація:
This study aims to: (1) describe the location of the students' mistakes in solving geometrical problems, (2) to describe the students' mistakes in solving geometrical problems, and (3) to describe the factors that cause students' errors in solving geometric problems. This research is a qualitative study using test and interview methods and was conducted at SMP Negeri 21 Surabaya. Selection of subjects based on criteria, namely students who made many mistakes on indicators of the location and type of error, variation of errors, openness and fluency of the subject to communicate during the interview process.
10
Yu, Yongjian, Guoding Chen, Jishun Li, and Yujun Xue. "Influence of Geometric Error of Rollers on Rotational Accuracy of Cylindrical Roller Bearings." Xibei Gongye Daxue Xuebao/Journal of Northwestern Polytechnical University 37, no. 4 (2019): 774–84. http://dx.doi.org/10.1051/jnwpu/20193740774.
Повний текст джерелаАнотація:
As the rotation of roller bearings is carried out under geometrical constraint of the inner ring, outer ring and multiple rollers, the motion error of the bearing should also be resulted from geometric errors of bearing parts. Therefore, it is crucial to establish the relationship between geometric errors of bearing components and motion error of assembled bearing, which contributes to improve rotational accuracy of assembled bearing in the design and machining of the bearing. For this purpose, considering roundness error and dimension error of the inner raceway, the outer raceway and rollers, a prediction method for rotational accuracy of cylindrical roller bearings is proposed, and the correctness of the proposed prediction method is verified by experimental results. The influences of roller's geometric error distribution, roller's roundness error and the number of rollers on the runout value of inner ring are investigated. The results show that, the roller arrangement with different geometric errors has a significant impact on rotational accuracy of cylindrical roller bearings. The rotational accuracy could be improved remarkably when multiple rollers with different dimension error are distributed alternately according to the size error. Even-order roundness error of rollers has a significant effect on the rotational accuracy, and the decrease level depends on the orders of roundness errors of bearing parts and the number of rollers. But odd-order roundness error of rollers has almost no effect on the rotational accuracy. The rotational accuracy of assembled bearing would be significantly improved or decreased when even order harmonic of rollers and the number of rollers satisfy specific relationships. The greater the order of roundness error of the rollers, the more severe the influence of the roller number on rotational accuracy of assembled bearing. The rotational accuracy can not be always improved with the increase of the number of rollers.