Добірка наукової літератури з теми "Enhancement additive manufacturing"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Enhancement additive manufacturing".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Enhancement additive manufacturing"
Näsström, Jonas, Frank Brueckner, and Alexander F. H. Kaplan. "Laser enhancement of wire arc additive manufacturing." Journal of Laser Applications 31, no. 2 (May 2019): 022307. http://dx.doi.org/10.2351/1.5096111.
Повний текст джерелаBonavolontà, Francesco, Edoardo Campoluongo, Annalisa Liccardo, and Rosario Schiano Lo Moriello. "Performance Enhancement of Rogowski Coil Through an Additive Manufacturing Approach." International Review of Electrical Engineering (IREE) 14, no. 3 (June 30, 2019): 148. http://dx.doi.org/10.15866/iree.v14i3.17606.
Повний текст джерелаTouzé, S., M. Rauch, and J. Y. Hascoët. "Flowability characterization and enhancement of aluminium powders for additive manufacturing." Additive Manufacturing 36 (December 2020): 101462. http://dx.doi.org/10.1016/j.addma.2020.101462.
Повний текст джерелаGu, Dongdong, Xinyu Shi, Reinhart Poprawe, David L. Bourell, Rossitza Setchi, and Jihong Zhu. "Material-structure-performance integrated laser-metal additive manufacturing." Science 372, no. 6545 (May 27, 2021): eabg1487. http://dx.doi.org/10.1126/science.abg1487.
Повний текст джерелаSrinivasan, Naveen Raj, J. Chamala Vaishnavi, BL Varun Darshan, D. Srajaysikhar, G. Sakthivel, and N. Raghukiran. "Enhancement of an electric drill body using design for additive manufacturing." Journal of Physics: Conference Series 1969, no. 1 (July 1, 2021): 012025. http://dx.doi.org/10.1088/1742-6596/1969/1/012025.
Повний текст джерелаAndrew, J. Jefferson, Jabir Ubaid, Farrukh Hafeez, Andreas Schiffer, and S. Kumar. "Impact performance enhancement of honeycombs through additive manufacturing-enabled geometrical tailoring." International Journal of Impact Engineering 134 (December 2019): 103360. http://dx.doi.org/10.1016/j.ijimpeng.2019.103360.
Повний текст джерелаDemadis, Konstantinos D., Maria Somara, and Eleftheria Mavredaki. "Additive-Driven Dissolution Enhancement of Colloidal Silica. 3. Fluorine-Containing Additives." Industrial & Engineering Chemistry Research 51, no. 7 (February 2, 2012): 2952–62. http://dx.doi.org/10.1021/ie202806m.
Повний текст джерелаWang, Xiuhu. "Research Progress and Current Situation of Laser Additive Technology." Academic Journal of Science and Technology 2, no. 1 (July 21, 2022): 186–88. http://dx.doi.org/10.54097/ajst.v2i1.984.
Повний текст джерелаXu, Zhenlin, Hui Zhang, Xiaojie Du, Yizhu He, Hong Luo, Guangsheng Song, Li Mao, Tingwei Zhou, and Lianglong Wang. "Corrosion resistance enhancement of CoCrFeMnNi high-entropy alloy fabricated by additive manufacturing." Corrosion Science 177 (December 2020): 108954. http://dx.doi.org/10.1016/j.corsci.2020.108954.
Повний текст джерелаKovacev, Nikolina, Sheng Li, Weining Li, Soheil Zeraati-Rezaei, Athanasios Tsolakis, and Khamis Essa. "Additive Manufacturing of Novel Hybrid Monolithic Ceramic Substrates." Aerospace 9, no. 5 (May 7, 2022): 255. http://dx.doi.org/10.3390/aerospace9050255.
Повний текст джерелаДисертації з теми "Enhancement additive manufacturing"
Wei, William Lien Chin. "New Studies on Thermal Transport in Metal Additive Manufacturing Processes and Products." Research Showcase @ CMU, 2017. http://repository.cmu.edu/dissertations/1057.
Повний текст джерелаLi, Jiaqi. "Study of Nano-Transfer Technology for Additive Nanomanufacturing and Surface Enhanced Raman Scattering." University of Dayton / OhioLINK, 2021. http://rave.ohiolink.edu/etdc/view?acc_num=dayton1628006052402601.
Повний текст джерелаVENTOLA, LUIGI. "High-efficiency heat transfer devices by innovative manufacturing techniques." Doctoral thesis, Politecnico di Torino, 2016. http://hdl.handle.net/11583/2644177.
Повний текст джерелаSidhu, Kuldeep S. "Residual Stress Enhancement of Additively Manufactured Inconel 718 by Laser Shock Peening and Ultrasonic Nano-crystal Surface Modification." University of Cincinnati / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ucin1535464760914267.
Повний текст джерелаImbrogno, Stano, Franco Furgiuele, and Domenico Umbrello. "Surface Integrity enhancement of aerospace components produced by subtractive and additive manufacturing processes." Thesis, 2018. http://hdl.handle.net/10955/1812.
Повний текст джерела"Study Thermal Property of Stereolithography 3D Printed Multiwalled Carbon Nanotubes Filled Polymer Nanocomposite." Master's thesis, 2020. http://hdl.handle.net/2286/R.I.62966.
Повний текст джерелаDissertation/Thesis
Masters Thesis Mechanical Engineering 2020
(9187607), Jin Cui. "COMPLIANT MICROSTRUCTURES FOR ENHANCED THERMAL CONDUCTANCE ACROSS INTERFACES." Thesis, 2020.
Знайти повний текст джерелаWith the extreme increases in power density of electronic devices, the contact thermal resistance imposed at interfaces between mating solids becomes a major challenge in thermal management. This contact thermal resistance is mainly caused by micro-scale surface asperities (roughness) and wavy profile of surface (nonflatness) which severely reduce the contact area available for heat conduction. High contact pressures (1~100 MPa) can be used to deform the surface asperities to increase contact area. Besides, a variety of conventional thermal interface materials (TIM), such as greases and pastes, are used to improve the contact thermal conductance by filling the remaining air gaps. However, there are still some applications where such TIMs are disallowed for reworkability concerns. For example, heat must be transferred across dry interfaces to a heat sink in pluggable opto-electronic transceivers which needs to repeatedly slide into / out of contact with the heat sink. Dry contact and low contact pressures are required for this sliding application.
This dissertation presents a metallized micro-spring array as a surface coating to enhance dry contact thermal conductance under ultra-low interfacial contact pressure. The shape of the micro-springs is designed to be mechanically compliant to achieve conformal contact between nonflat surfaces. The polymer scaffolds of the micro-structured TIMs are fabricated by using a custom projection micro-stereolithography (μSL) system. By applying the projection scheme, this method is more cost-effective and high-throughput than other 3D micro-fabrication methods using a scanning scheme. The thermal conductance of polymer micro-springs is further enhanced by metallization using plating and surface polishing on their top surfaces. The measured mechanical compliance of TIMs indicates that they can deform ~10s μm under ~10s kPa contact pressures over their footprint area, which is large enough to accommodate most of surface nonflatness of electronic packages. The measured thermal resistances of the TIM at different fabrication stages confirms the enhanced thermal conductance by applying metallization and surface polishing. Thermal resistances of the TIMs are compared to direct metal-to-metal contact thermal resistance for flat and nonflat mating surfaces, which confirms that the TIM outperforms direct contact. A thin layer of soft polymer is coated on the top surfaces of the TIMs to accommodate surface roughness that has a smaller spatial period than the micro-springs. For rough surfaces, the polymer-coated TIM has reduced thermal resistance which is comparable to a benchmark case where the top surfaces of the TIM are glued to the mating surface. A polymer base is designed under the micro-spring array which can provide the advantages for handling as a standalone material or integration convenience, at the toll of an increased insertion resistance. Through-holes are designed in the base layer and coated with thermally conductive metal after metallization to enhance thermal conductance of the base layer; a thin layer of epoxy is applied between the base layer and the working surface to reduce contact thermal resistance exposed on the base layer. Cycling tests are conducted on the TIMs; the results show good early-stage reliability of the TIM under normal pressure, sliding contact, and temperature cycles. The TIM is thermally demonstrated on a pluggable application, namely, a CFP4 module, which shows enhanced thermal conductance by applying the TIM.
To further enhance the potential mechanical compliance of microstructured surfaces, a stable double curved beam structure with near-zero stiffness composed of intrinsic negative and positive stiffness elastic elements is designed and fabricated by introducing residual stresses. Stiffness measurements shows that the positive-stiffness single curved beam, which is the same as the top beam in the double curved beam, is stiffer than the double curved beam, which confirms the negative stiffness of the bottom beam in the double curved beam. Layered near zero-stiffness materials made of these structures are built to demonstrate the scalability of the zero-stiffness zone.Книги з теми "Enhancement additive manufacturing"
International Conference on Gears 2022. VDI Verlag, 2022. http://dx.doi.org/10.51202/9783181023891.
Повний текст джерелаЧастини книг з теми "Enhancement additive manufacturing"
Chandrashekar, Arjun C., Sreekanth Vasudev Nagar, and K. Guruprasad. "A Skill Enhancement Virtual Training Model for Additive Manufacturing Technologies." In Lecture Notes in Networks and Systems, 532–43. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-23162-0_48.
Повний текст джерелаKoneri, Raghavendra, Sanket Mulye, Karthik Ananthakrishna, Rakesh Hota, Brajamohan Khatei, and Srikanth Bontha. "Additive Manufacturing of Lattice Structures for Heat Transfer Enhancement in Pipe Flow." In Lecture Notes in Mechanical Engineering, 233–46. Singapore: Springer Singapore, 2020. http://dx.doi.org/10.1007/978-981-15-5689-0_21.
Повний текст джерелаŁabowska, Magdalena B., Ewa I. Borowska, Patrycja Szymczyk-Ziółkowska, Izabela Michalak, and Jerzy Detyna. "Hydrogel Based on Alginate as an Ink in Additive Manufacturing Technology—Processing Methods and Printability Enhancement." In New Horizons for Industry 4.0 in Modern Business, 209–32. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-20443-2_10.
Повний текст джерелаAmuda, Muhammed Olawale Hakeem, and Esther Titilayo Akinlabi. "Trend and Development in Laser Surface Modification for Enhanced Materials Properties." In Additive Manufacturing, 271–95. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9624-0.ch011.
Повний текст джерелаErinosho, Mutiu F., Esther T. Akinlabi, and Sisa Pityana. "Enhancement of Surface Integrity of Titanium Alloy With Copper by Means of Laser Metal Deposition Process." In Additive Manufacturing, 245–70. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-9624-0.ch010.
Повний текст джерелаGajakosh, Amithkumar, R. Suresh Kumar, V. Mohanavel, Ragavanantham Shanmugam, and Monsuru Ramoni. "Application of Machine Learning Techniques in Additive Manufacturing: A Review." In Applications of Artificial Intelligence in Additive Manufacturing, 1–24. IGI Global, 2022. http://dx.doi.org/10.4018/978-1-7998-8516-0.ch001.
Повний текст джерелаKubade, Pravin R., Hrushikesh B. Kulkarni, and Vinayak C. Gavali. "Property Enhancement of Carbon Fiber-Reinforced Polylactic Acid Composites Prepared by Fused-Deposition Modeling." In Advances in Computer and Electrical Engineering, 455–78. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-7998-0117-7.ch017.
Повний текст джерелаBhuyan, Dheeman. "Design of Prosthetic Heart Valve and Application of Additive Manufacturing." In Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 482–91. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch024.
Повний текст джерелаKaushik, Brahmansh, and S. Anand Kumar. "Computer vision based online monitoring technique: part quality enhancement in the selective laser melting process." In Advances in Additive Manufacturing Artificial Intelligence, Nature-Inspired, and Biomanufacturing, 167–94. Elsevier, 2023. http://dx.doi.org/10.1016/b978-0-323-91834-3.00007-7.
Повний текст джерелаBarua, Ranjit, Sudipto Datta, Amit Roychowdhury, and Pallab Datta. "Importance of 3D Printing Technology in Medical Fields." In Research Anthology on Emerging Technologies and Ethical Implications in Human Enhancement, 704–17. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-8050-9.ch036.
Повний текст джерелаТези доповідей конференцій з теми "Enhancement additive manufacturing"
Kulkarni, Anup, Vivek C. Peddiraju, Subhradeep Chatterjee, and Dheepa Srinivasan. "Effect of Build Geometry and Porosity in Additively Manufactured CuCrZr." In 2022 International Additive Manufacturing Conference. American Society of Mechanical Engineers, 2022. http://dx.doi.org/10.1115/iam2022-93986.
Повний текст джерелаBillings, Christopher, Zahed Siddique, and Yingtao Liu. "Enhancement of Mechanical Engineering Education With Additive Manufacturing Projects." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24568.
Повний текст джерелаWong, Kin Keong, Kai Choong Leong, and S. B. Tor. "HEAT TRANSFER ENHANCEMENT OF SURFACES FOR POOL BOILING USING ADDITIVE MANUFACTURING." In First Thermal and Fluids Engineering Summer Conference. Connecticut: Begellhouse, 2016. http://dx.doi.org/10.1615/tfesc1.hte.012717.
Повний текст джерелаStafford, Gabriel J., Stephen T. McClain, David R. Hanson, Robert F. Kunz, and Karen A. Thole. "Convection in Scaled Turbine Internal Cooling Passages With Additive Manufacturing Roughness." In ASME Turbo Expo 2021: Turbomachinery Technical Conference and Exposition. American Society of Mechanical Engineers, 2021. http://dx.doi.org/10.1115/gt2021-59684.
Повний текст джерелаHarding, Kevin G. "Structured light as an enhancement tool for low contrast features in additive manufacturing." In Dimensional Optical Metrology and Inspection for Practical Applications VII, edited by Song Zhang and Kevin G. Harding. SPIE, 2018. http://dx.doi.org/10.1117/12.2302882.
Повний текст джерелаNawafleh, Nashat, and Emrah Celik. "Direct Write Additive Manufacturing of High-Strength, Short Fiber Reinforced Sandwich Panels." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24501.
Повний текст джерелаFatoba, O. S., S. A. Akinlabi, E. T. Akinlabi, L. C. Naidoo, A. A. Adediran, and O. S. Odebiyi. "Microstructural Enhancement and Performance of Additive Manufactured Titanium Alloy Grade 5 Composite Coatings." In ASME 2020 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2020. http://dx.doi.org/10.1115/imece2020-24125.
Повний текст джерелаFatoba, Olawale Samuel, Tien-Chien Jen, and Esther Titilayo Akinlabi. "Characterization. Performance and Microstructural Enhancement of Additive Manufactured AI-Si-Sn-Cu/Ti -6A1-4 V Composite Coatings." In 2022 IEEE 13th International Conference on Mechanical and Intelligent Manufacturing Technologies (ICMIMT). IEEE, 2022. http://dx.doi.org/10.1109/icmimt55556.2022.9845310.
Повний текст джерелаGong, Xibing, James Lydon, Kenneth Cooper, and Kevin Chou. "Microstructural Analysis and Nanoindentation Characterization of Ti-6Al-4V Parts From Electron Beam Additive Manufacturing." In ASME 2014 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2014. http://dx.doi.org/10.1115/imece2014-36675.
Повний текст джерелаWei, Chao, Gabriel Alexander Vasquez Diaz, Kun Wang, and Peiwen Li. "CFD Analysis and Evaluation of Heat Transfer Enhancement of Internal Flow in Tubes With 3D-Printed Complex Fins." In ASME 2019 Heat Transfer Summer Conference collocated with the ASME 2019 13th International Conference on Energy Sustainability. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ht2019-3630.
Повний текст джерелаЗвіти організацій з теми "Enhancement additive manufacturing"
Helge, Torgersen, ed. Additive bio-manufacturing: 3D printing for medical recovery and human enhancement. Vienna: self, 2018. http://dx.doi.org/10.1553/ita-pb-stoa-3d-2018.
Повний текст джерела