Добірка наукової літератури з теми "ENGINE LEAKAGE"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "ENGINE LEAKAGE".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "ENGINE LEAKAGE"
Kowalski, Jerzy. "An Experimental Study of Emission and Combustion Characteristics of Marine Diesel Engine in Case of Cylinder Valves Leakage." Polish Maritime Research 22, no. 3 (September 1, 2015): 90–98. http://dx.doi.org/10.1515/pomr-2015-0061.
Повний текст джерелаChoi, Gyeung Ho, Seong Keun Shin, Seok Choun Bae, Yong Jong Chung, and Sung Bin Han. "Effects of injector leakage on liquid propane injection engine performance." Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering 219, no. 4 (April 1, 2005): 559–64. http://dx.doi.org/10.1243/095440705x11149.
Повний текст джерелаMiao, Shujing, Haiyang Liu, Haitang Cen, Jiang Liu, Huaqiang Li, and Gang Xu. "Study on Leakage Effect Factors of Two-Stroke Micro Free Piston Swing Engine." Micromachines 13, no. 8 (August 14, 2022): 1314. http://dx.doi.org/10.3390/mi13081314.
Повний текст джерелаDZIUBAK, Tadeusz, and Mirosław KARCZEWSKI. "Operational malfunctions of turbochargers – reasons and consequences." Combustion Engines 164, no. 1 (February 1, 2016): 13–21. http://dx.doi.org/10.19206/ce-116484.
Повний текст джерелаKołodziej, Szymon. "The effect of the leakage of the engine arrest engine and emissions of harmful substances." AUTOBUSY – Technika, Eksploatacja, Systemy Transportowe 19, no. 6 (June 30, 2018): 502–5. http://dx.doi.org/10.24136/atest.2018.121.
Повний текст джерелаJukl, Michal, Adam Polcar, and Jiří Čupera. "Possibilities of Monitoring the Technical Condition of the Combustion Engine with Starter Load Current." Acta Universitatis Agriculturae et Silviculturae Mendelianae Brunensis 62, no. 5 (2014): 961–69. http://dx.doi.org/10.11118/actaun201462050961.
Повний текст джерелаZhang, Saifei, Chunhua Zhang, Yong Liu, Wei Wu, Han Wu, and Shihua Yuan. "Parametric Simulations on Leakage and Performance of a Miniature Free-Piston Generator (MFPG)." Applied Sciences 11, no. 16 (August 23, 2021): 7742. http://dx.doi.org/10.3390/app11167742.
Повний текст джерелаQi, Congzheng, Zemin Ding, Lingen Chen, Yanlin Ge, and Huijun Feng. "Modeling and Performance Optimization of an Irreversible Two-Stage Combined Thermal Brownian Heat Engine." Entropy 23, no. 4 (March 31, 2021): 419. http://dx.doi.org/10.3390/e23040419.
Повний текст джерелаKurhekar, Swapnil D., and Abhijeet B. Tamse. "Quality Improvement of Oil and Fuel Leakage in Diesel Engine by using Semi Automatic Setup." International Journal for Research in Applied Science and Engineering Technology 11, no. 3 (March 31, 2023): 310–18. http://dx.doi.org/10.22214/ijraset.2023.49405.
Повний текст джерелаHu, Ming Jiang. "Optimizing Crankcase Ventilation System of Gasoline Engine." Applied Mechanics and Materials 58-60 (June 2011): 171–76. http://dx.doi.org/10.4028/www.scientific.net/amm.58-60.171.
Повний текст джерелаДисертації з теми "ENGINE LEAKAGE"
Chaudhry, Udey. "Tip leakage flow, heat transfer and blade lifting in a jet engine turbine." Thesis, Virginia Polytechnic Institute and State University, 1987. http://hdl.handle.net/10919/94499.
Повний текст джерелаM.S.
Geiger, Derek Henry. "Comparative Analysis of Serrated Trailing Edge Designs on Idealized Aircraft Engine Fan Blades for Noise Reduction." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/40542.
Повний текст джерелаMaster of Science
Virdi, Amandeep Singh. "Aero-thermal performance and enhanced internal cooling of unshrouded turbine blade tips." Thesis, University of Oxford, 2015. https://ora.ox.ac.uk/objects/uuid:62c3e94a-a1ff-47a8-bb81-e870b0013f11.
Повний текст джерелаKluka, James Anthony. "The design of low-leakage modular regenerators for gas-turbine engines." Thesis, Massachusetts Institute of Technology, 1995. http://hdl.handle.net/1721.1/46564.
Повний текст джерелаIncludes bibliographical references (p. [229]-231).
The design of a modular regenerator concept (patented by Wilson and MIT) for gas-turbine engines is investigated. Mechanical design analysis and theoretical performance calculations were made to show the concept's functionality and performance benefits over current regenerator designs. The modular regenerator concept consists of a ceramic-honeycomb matrix discretized into rectangular blocks, called modules. The modules are exposed to hot (turbine exhaust) and cold (compressor outlet) streams, then are periodically transported through linear passages from one stream to the other. Separating the matrix into modules reduces the transverse sealing lengths substantially. Furthermore, the range of gas-turbine applications increases with the modular concept since larger matrix face areas are possible. Module design is investigated which includes using current research results pertaining to manufacturing technology for rotary regenerators. Mechanical design analysis was made to investigate the possible module-movement schemes. Several regenerator configurations and orientations are introduced. One particular concept balances the pressure forces such that the power requirement for module movement is reduced substantially. Design drawings of a possible modular prototype showing the general configuration and mechanical layout accompany the analysis. A method for determining the regenerator size and measuring its fluid-mechanical and heat-transfer performance is given. An optimization study is made by analyzing the effects when several chosen design parameters are varied. Numerical results of a modular concept for a small gas-turbine engine (120 kW) are given. Seal leakage calculations were made for two modular concepts and compared to the leakage rates for two rotary concepts. The total seal-leakage rates for both modular cases were considerably less than the rotary concepts and can be reduced to well under one percent. In addition, techniques for further leakage reduction are given. Other design issues (to further prove the modular concept's feasibility) not covered in this study have been identified. Guidelines for investigating these issues are given.
by James Anthony Kluka.
S.M.
Dagson, Josef, and Källström Samuel Nissilä. "Air Leakage Diagnosis in Heavy Duty Truck Engines with EGR and VGT." Thesis, Linköpings universitet, Fordonssystem, 2009. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-88183.
Повний текст джерелаScania CV AB är en ledande koncern inom utveckling och produktion av bussar, lastbilar samt industri- och marinmotorer. Nya lagkrav för miljö och säkerhet ställer ständigt högre krav på de tillverkade produkterna. Ett nära förestående lagkrav för lastbilar, Euro 6, innebär att gasläckage från motorn ska detekteras under körning. Om läckaget förutom att detekteras också kan isoleras, det vill säga särskiljas från andra fel, går reparationen i verkstaden snabbare då man slipper lokalisera läckaget. En snabbare reparation ökar up-time, det vill säga tiden som lastbilen kan användas på åkeriet. I detta exjobb används befintliga metoder för residualgenerering framtagna på Scania för att åstadkomma modelbaserad läckagediagnos. Arbetet tar även fram mätdata för olika givarfel samt för två läckage i motorn. Denna mätdata används för att utvärdera det erhållna diagnossystemets faktiska prestanda. Resultatet, som bygger på residualerna som metoden genererat, visar att läckage går att detektera, och att läckagen går att isolera från fel på tryckgivarsensorer på laddluftssidan och avgassidan. Denna isolering anses vara den svåraste att uppnå av alla sensorfel samt läckage varvid övrig isoleringsprestande verkar lovande. Däremot behövs mer mätdata för att säkert kunna fastställa övrig isoleringsprestanda. Diagnosmetoden lämpar sig troligen för exekvering i realtid ombord på lastbilen.
Ranson, William Wayne. "Adiabatic Effectiveness Measurements of Leakage Flows along the Hub Region of Gas Turbine Engines." Thesis, Virginia Tech, 2004. http://hdl.handle.net/10919/77017.
Повний текст джерелаMaster of Science
Шевченко, Сергій Андрійович. "Удосконалення пневмосистеми запуску ракетних двигунів шляхом стабілізації тиску робочого тіла та поліпшення її динамічних характеристик". Thesis, НТУ "ХПІ", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/29030.
Повний текст джерелаThe thesis for the scientific degree of the Candidate of Technical Sciences by specialty 05.05.17 – hydraulic machines and hydropneumatic units. – National Technical University "Kharkiv Polytechnic Institute", Kharkiv, 2017. The dissertation describes research of perfected pneumatic starting system of a main restartable liquid-propellant rocket engine destined for a launch vehicle upper stage. The starting system, which structure includes a part of the engine pneumatic unit, performs turbopump spin-up by supplying compressed helium to its turbine. A feature of the system is application of a pneumatically controlled helium pressure regulator. New complex of discrete-continual mathematical models is developed and implemented in the designing practice for the gas-dynamic analysis of this pneumatic system and analysis of friction forces and gas leaks through fluoroplastic lip-type seals of regulators. New computational method is proposed for the developed system’s dynamic stability research. The gas-dynamic characteristics of a metal hose are researched. New concept of the laboratory stand is developed and implemented to enable helium saving at development tests. Experimental-computational research of the pneumatic system is performed, recommendations of which are introduced into the engine in relation to the regulator parameters reducing oscillations and improving other dynamic characteristics.
Шевченко, Сергей Андреевич. "Усовершенствование пневмосистемы запуска ракетных двигателей путём стабилизации давления рабочего тела и улучшения её динамических характеристик". Thesis, Государственное предприятие "Конструкторское бюро "Южное" им. М. К. Янгеля", 2017. http://repository.kpi.kharkov.ua/handle/KhPI-Press/29036.
Повний текст джерелаThe thesis for the scientific degree of the Candidate of Technical Sciences by specialty 05.05.17 – hydraulic machines and hydropneumatic units. – National Technical University "Kharkiv Polytechnic Institute", Kharkiv, 2017. The dissertation describes research of perfected pneumatic starting system of a main restartable liquid-propellant rocket engine destined for a launch vehicle upper stage. The starting system, which structure includes a part of the engine pneumatic unit, performs turbopump spin-up by supplying compressed helium to its turbine. A feature of the system is application of a pneumatically controlled helium pressure regulator. New complex of discrete-continual mathematical models is developed and implemented in the designing practice for the gas-dynamic analysis of this pneumatic system and analysis of friction forces and gas leaks through fluoroplastic lip-type seals of regulators. New computational method is proposed for the developed system’s dynamic stability research. The gas-dynamic characteristics of a metal hose are researched. New concept of the laboratory stand is developed and implemented to enable helium saving at development tests. Experimental-computational research of the pneumatic system is performed, recommendations of which are introduced into the engine in relation to the regulator parameters reducing oscillations and improving other dynamic characteristics.
O'Dowd, Devin Owen. "Aero-thermal performance of transonic high-pressure turbine blade tips." Thesis, University of Oxford, 2010. http://ora.ox.ac.uk/objects/uuid:e7b8e7d0-4973-4757-b4df-415723e7562f.
Повний текст джерелаYang, Jian-Kai, and 楊建楷. "Analysis of the seal leakage of UAV rotary engine." Thesis, 2014. http://ndltd.ncl.edu.tw/handle/78045495145533649056.
Повний текст джерела國立中興大學
機械工程學系所
102
The purpose of this research is to investigate the effect of leakage the of rotary engine, establish the model of rotary engine, establish a testing platform to carry out the leakage measurement, analyze the heat transfer and performance of rotary engine. This research analyze the leakage of apex seal and side seal and collect information on seal design by patent analysis. The model of the rotary engine establish and the measured data of leakage will be used for comparison to valid this model. Using the comparison result to calculate clearance of the seal. This research do the rotary engine static testing. First, fix the rotor in different section. Then, addition high pressure air into the combustion chamber and using the pressure sensor measure the change of the pressure. Finally, according to the measure data to evaluate the level of leakage and calculate the clearance of the seal. This research analyze the heat transfer performance of a rotary engine. The whole engine case was divided into 12 parts, and evaluated for each part with the estimated gas temperature. It was found the wall temperature . This research investigate the effect of parameters including altitude, air fuel ratio, spark advance angle, inlet pressure, compression ratio, and sealing.
Книги з теми "ENGINE LEAKAGE"
M, Steinetz Bruce, and United States. National Aeronautics and Space Administration., eds. Engine panel seals for hypersonic engine applications: High temperature leakage assessments and flow modelling. [Washington, DC]: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаP, Proctor Margaret, and United States. National Aeronautics and Space Administration., eds. JTAGG II brush seal test results. [Washington, DC]: National Aeronautics and Space Administration, 1997.
Знайти повний текст джерелаM, Smith L., and United States. National Aeronautics and Space Administration., eds. Final report for grant titled: SSME propellant path leak detection real-time. [Washington, DC: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаUnited States. National Aeronautics and Space Administration., ed. Final technical report on the development of a solid-state hydrogen sensor for rocket engine leakage detection. [Washington, DC: National Aeronautics and Space Administration, 1994.
Знайти повний текст джерелаTexas A & M University. Turbomachinery Laboratories. and United States. National Aeronautics and Space Administration., eds. SSME seal test program: Test results for hole-pattern damper seals : interim progress report. College Station, Texas: Turbomachinery Laboratories, Mechanical Engineering Department, Texas A&M University, 1985.
Знайти повний текст джерелаChilds, Dara W. SSME seal test program: Test results for smooth, hole-pattern, and helically grooved stators : interim progress report. College Station, Tex: Texas A&M, Turbomachinery Laboratories, Mechanical Engineering Dept., 1987.
Знайти повний текст джерелаJTAGG II brush seal test results. [Washington, DC]: National Aeronautics and Space Administration, 1997.
Знайти повний текст джерелаЧастини книг з теми "ENGINE LEAKAGE"
Soto-Barrón, Félix Omar, Martín García-Pérez, Guillermo Urriolagoitia-Sosa, Beatriz Romero-Ángeles, Antonio Hernández-Cerón, Diego Sabas-Gonzalez, José Luis Reyes-Reyes, Martín Guzmán-Baeza, and Belén Alejandra Contreras-Mendoza. "Numerical-Experimental Analysis of the Sealing Efficiency Utilizing Stresses Produced to an Engine Gasket Manufactured by CRS of ¼ Hardness with a Nitrile Coating on Both Sides." In Proceedings of the XV Ibero-American Congress of Mechanical Engineering, 175–81. Cham: Springer International Publishing, 2023. http://dx.doi.org/10.1007/978-3-031-38563-6_26.
Повний текст джерелаJafari, Seyed Mohammad, Hamid Mehdigholi, and Mehdi Behzad. "Experimental Measurement and Theoretical Modeling of Internal Combustion Engine Valve Leakage by Acoustic Emission Method." In Lecture Notes in Mechanical Engineering, 309–21. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-06966-1_29.
Повний текст джерелаOhkawa, Satoshi, Hidekazu Nishimura, and Yoshiaki Ohkami. "Decomposition Analysis Resolution Process (DAR) of Systems Engineering Applied to Development of Countermeasure on Leakage of Engine Head-Gasket." In IFIP Advances in Information and Communication Technology, 181–92. Berlin, Heidelberg: Springer Berlin Heidelberg, 2014. http://dx.doi.org/10.1007/978-3-662-45937-9_19.
Повний текст джерелаYu, Yonghua, Pengfei Ji, and Jianguo Yang. "Experimental Research on Diagnosis of Valve Leakage for Diesel Engines Based on Acoustic Emission." In Lecture Notes in Mechanical Engineering, 687–96. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-09507-3_59.
Повний текст джерелаCzech, Piotr. "Identification of Leakages in the Inlet System of an Internal Combustion Engine with the Use of Wigner-Ville Transform and RBF Neural Networks." In Telematics in the Transport Environment, 414–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-34050-5_47.
Повний текст джерелаKhan, Bilal Ahmad. "State of Economic Growth and Development." In Jammu & Kashmir, 45–72. Oxford University Press, 2022. http://dx.doi.org/10.1093/oso/9780192849656.003.0002.
Повний текст джерелаТези доповідей конференцій з теми "ENGINE LEAKAGE"
Heppner, Joshua D., David C. Walther, and Albert P. Pisano. "Leakage Flow Analysis for a MEMS Rotary Engine." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-41868.
Повний текст джерелаKapusuz, E., and B. Ekici. "Evaluation of the Effect of Gas Leakage on Operation of an Optical Engine." In ASME 2010 10th Biennial Conference on Engineering Systems Design and Analysis. ASMEDC, 2010. http://dx.doi.org/10.1115/esda2010-25076.
Повний текст джерелаJarrabet, G. P., and L. Lu. "Low Leakage Fiber Metal Seals." In ASME 1992 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1992. http://dx.doi.org/10.1115/92-gt-141.
Повний текст джерелаWang, Simon S., and Yingjie Lin. "Feasibility of Detecting Antifreeze Leakage in Diesel Engine Oils." In SAE 2006 World Congress & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2006. http://dx.doi.org/10.4271/2006-01-0703.
Повний текст джерелаHowe, H., G. Jarrabet, L. Lu, and R. Tolokan. "Advanced engine seals for low leakage and long life." In 30th Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1994. http://dx.doi.org/10.2514/6.1994-2805.
Повний текст джерелаMeernik, Paul R., and Alex C. Alkidas. "Impact of Exhaust Valve Leakage on Engine-Out Hydrocarbons." In International Fuels & Lubricants Meeting & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1993. http://dx.doi.org/10.4271/932752.
Повний текст джерелаZhang, Guangde, Caixia You, Weihua Wang, Lu Xie, and Jing Sun. "Study on Strategies of Anti-Wear and Leakage for Fuel Injection System of Dimethyl Ether (DME) Engine." In 2012 Small Engine Technology Conference & Exhibition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 2012. http://dx.doi.org/10.4271/2012-32-0073.
Повний текст джерелаProctor, Margaret P., and Irebert R. Delgado. "Leakage and Power Loss Test Results for Competing Turbine Engine Seals." In ASME Turbo Expo 2004: Power for Land, Sea, and Air. ASMEDC, 2004. http://dx.doi.org/10.1115/gt2004-53935.
Повний текст джерелаMori, Goich, Takashi Umeki, Yoshinobu Ueno, and Tetsu Ohishi. "Engine Valve Stem Seal, Oil Leakage Control Technology and Performance." In International Congress & Exposition. 400 Commonwealth Drive, Warrendale, PA, United States: SAE International, 1996. http://dx.doi.org/10.4271/960208.
Повний текст джерелаBuntain, Nick, and Kathryn Lueders. "Orbital maneuvering subsystem engine propellant leakage ball-valve shaft seals." In 35th Joint Propulsion Conference and Exhibit. Reston, Virigina: American Institute of Aeronautics and Astronautics, 1999. http://dx.doi.org/10.2514/6.1999-2763.
Повний текст джерелаЗвіти організацій з теми "ENGINE LEAKAGE"
Jeng, Dun-Zen, Ming-June Hsieh, Chih-Chuan Lee, and Yu Han. The Numerical Investigation on the Performance of Rotary Engine with Leakage, Different Fuels and Recess Sizes. Warrendale, PA: SAE International, October 2012. http://dx.doi.org/10.4271/2012-32-0057.
Повний текст джерелаJeng, Dun-Zen, Ming-June Hsieh, Chih-Chuan Lee, and Yu Han. The Numerical Investigation on the Performance of Rotary Engine with Leakage, Different Fuels and Recess sizes. Warrendale, PA: SAE International, October 2013. http://dx.doi.org/10.4271/2013-32-9160.
Повний текст джерелаCAE Correlation of Sealing Pressure of a Press-in-Place Gasket. SAE Imposter, April 2021. http://dx.doi.org/10.4271/2021-01-0299.
Повний текст джерела