Готові списки джерел за темами / Energy-saving control

Зміст

  1. Статті в журналах
  2. Дисертації
  3. Книги
  4. Частини книг
  5. Тези доповідей конференцій
  6. Звіти організацій

Добірка наукової літератури з теми "Energy-saving control"

Автор: Grafiati
Опубліковано: 30 травня 2022
Оновлено: 31 травня 2022

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Energy-saving control".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Статті в журналах з теми "Energy-saving control"

1

Chernyshov, N. G., and S. I. Dvoretsky. "Synthesis of Energy-Saving Control." Vestnik Tambovskogo gosudarstvennogo tehnicheskogo universiteta 21, no. 1 (2015): 007–15. http://dx.doi.org/10.17277/vestnik.2015.01.pp.007-015.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Yasuda, Hiromi. "Energy Saving Lighting Control System." JOURNAL OF THE ILLUMINATING ENGINEERING INSTITUTE OF JAPAN 82, no. 7 (1998): 455–56. http://dx.doi.org/10.2150/jieij1980.82.7_455.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

BRUN, Xavier, Daniel THOMASSET, and Serge SCAVARDA. "CONTROL DESIGN FOR ENERGY SAVING." Proceedings of the JFPS International Symposium on Fluid Power 2002, no. 5-2 (2002): 379–82. http://dx.doi.org/10.5739/isfp.2002.379.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Matsuda, Kunihiro, Motoyoshi Sugita, Shyuichi Miyazaki, and Kenichi Kawamoto. "Energy Saving. Energy Saving by Invertor Control of Vaccum Pumps for Papermachines." JAPAN TAPPI JOURNAL 50, no. 8 (1996): 1148–52. http://dx.doi.org/10.2524/jtappij.50.1148.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Erbe, Heinz-Hermann. "THE RELEVANCE OF ENERGY SAVING CONTROL." IFAC Proceedings Volumes 39, no. 19 (2006): 1–5. http://dx.doi.org/10.3182/20061002-4-bg-4905.00002.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

NIKOLOVA, N., and E. NIKOLOV. "ENERGY SAVING ALGORITHMS AND CONTROL SYSTEM." IFAC Proceedings Volumes 39, no. 19 (2006): 141–46. http://dx.doi.org/10.3182/20061002-4-bg-4905.00024.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wang, Jin, Xin Lin Li, and Shu Sheng Li. "Energy Saving Program that Replaces Water Chiller with Combined Air-Energy Saving System and Water-Energy Saving System." Advanced Materials Research 171-172 (December 2010): 201–4. http://dx.doi.org/10.4028/www.scientific.net/amr.171-172.201.

Повний текст джерела
Анотація:
In spring, autumn and winter, centralized air conditioning system frequently produces excessive cooling, if we use both air-energy saving system and water-energy saving system for directly cooling, replacing the chiller cooling, we can achieve the objective of energy saving. This paper introduces the air and water-energy saving system operation strategies to determine the operation control methods of different seasons. Through case analysis, it shows that this design is feasible. The system is stable and easy to control and management. It has obvious effect of energy-saving. If the air-energy saving system and water-energy saving system mode is adopted, the add-on investment of equipment can be recovered within one year, with a better economic benefits.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Zhang, Min Gyu, Guang Hua Wu, and Feng Liu. "Strategy of Intelligent Energy-Saving Optimization Control and Energy Consumption Analysis on Regulator Control System of Closed Greenhouse." Applied Mechanics and Materials 666 (October 2014): 184–87. http://dx.doi.org/10.4028/www.scientific.net/amm.666.184.

Повний текст джерела
Анотація:
Adopting the integrated TOPSIS intelligent energy optimization control strategy, and compared to conventional single control strategy on energy consumption of greenhouse equipment under closed condition, this paper arrives at the best energy saving optimization control strategy with comprehensive benefits. The result shows that, integrated intelligent optimizing control was obviously more energy saving compared to those did not take optimization control. Specific results as follows: TOPSIS integration strategy with energy saving of 725.39kwh, energy-saving rate of 44.19%.This shows that the proposed integrated intelligent energy optimization control strategy and energy saving effect is remarkable.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Lu, Jun, Xin Wu, Yang Yan, and Xiao Yun Zhang. "Model Simulation of Power Saving and Heat Saving in Intelligent Building Energy Saving Design." Applied Mechanics and Materials 716-717 (December 2014): 470–73. http://dx.doi.org/10.4028/www.scientific.net/amm.716-717.470.

Повний текст джерела
Анотація:
The power saving and energy-saving control plays a crucial role in green building design. An intelligent electricity and heat saving control method is proposed based on PID control optimization control, this algorithm is applied in the design of green building, the collection of data is taken with feedback processing, the design method of energy saving and heat savingcontrol unit is presented in intelligent building, it provides the accurate basis for energy-saving and heat saving cycle control optimization design. The application of energy circulation control in design of green buildings is realized. The four layers real building is taken as the subjects in the experiment, the experimental results show that, the controller is applied in energy saving control of green building, it can effectively improve the control accuracy.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Han, Hui Xian, Mao Fu Liu, and Xian Li Cao. "Research of Electronic Energy Saving Control Technology in Construction Machinery." Advanced Materials Research 443-444 (January 2012): 272–76. http://dx.doi.org/10.4028/www.scientific.net/amr.443-444.272.

Повний текст джерела
Анотація:
This paper analyzed the typical power process of construction machinery, led to the idea of energy saving and the concept of generalized energy saving, put forward energy saving control system of construction machinery according to the present two typical control technologies of construction machinery. In the quantitative analysis of energy saving effect, aiming to the shortcomings of the current energy saving technology difficult to quantify, the paper puts forward a formula of the global energy saving target, explains comparison and evaluation methods of energy saving effect, and gives the concrete realization modes of the global energy saving and generalized energy saving: full electronic control technology and distributed control technology. Finally the paper prospects the future development trend of energy saving technology in construction machinery.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Дисертації з теми "Energy-saving control"

1

GESUALDI, ALEXANDRE CHANTAL. "ENERGY SAVING IN AIR CONDITIONERS BY DIRECT LOAD CONTROL." PONTIFÍCIA UNIVERSIDADE CATÓLICA DO RIO DE JANEIRO, 1999. http://www.maxwell.vrac.puc-rio.br/Busca_etds.php?strSecao=resultado&nrSeq=1018@1.

Повний текст джерела
Анотація:
COORDENAÇÃO DE APERFEIÇOAMENTO DO PESSOAL DE ENSINO SUPERIOR
O objetivo principal desta dissertação é o de buscar formas de modelar e controlar, adequadamente, condicionadores de ar de janela, pois tratam-se de máquinas que possuem um elevado consumo de energia, perdendo somente para o chuveiro elétrico. A contribuição do mesmo para a demanda do setor doméstico é da ordem de 7 %. As pesquisas de posse de eletrodomésticos mostram que somente 6 % dos domicílios têm instalada tal tipo de máquina, o que representa um expressivo potencial de crescimento para os próximos anos na aquisição deste produto. É oportuno observar que em edifí­cios comerciais, 48 % da energia é consumida com refrigeração, o que implica na necessidade de novos projetos em que centrais de grande porte sejam implantadas, visando um gasto comparativamente menor ao somatório de aparelhos individuais.
This work involves the modeling of window air conditioners, with the purpose to obtain the electrical potential consume by itself, related to the medium external temperature. To obtain such goal, it was necessary the study of all features which involve their several components, aiming the conduct fitted from the parts, due to the result expected. It was made a public research with the users from these equipments. From this result, it was developed a stochastic model to be used in energy demand from a specific region, considering that the equipment / machine in use shows similar qualifications. After that, it was added to the system of machine a direct load control, which delay the compressor, obtaining an efficient working from it (saving demand), without affecting deeply normal using conditions. Finally, comparing two examples mentioned above, it was concluded that in the less powerful equipment (air conditioner) the thermal control with changed features, had good results, while more powerful equipments are more economic with direct load control.
Esta disertación tiene como objetivo principal buscar formas de modelar y controlar adecuadamente, equipos de aire acondicionado de tipo ventana, por tratarse de equipos que poseen un alto consumo de energía, superado tan solo por la ducha eléctrica. La contribución de éste para la demanda del sector doméstico es del orden de 7 %. Las investigaciones sobre la pose de electrodomésticos muestran que sólo el 6 % de los domicilios tiene instalada tal tipo de máquina, lo que representa um expresivo potencial de crescimiento en la adquisición de este producto para los próximos años. Es oportuno observar que en edificios comerciales, 48 % de la energia consumida se refiere a refrigeración, lo que nos lleva a la necesidad de nuevos proyectos donde, centrales de grande porte seam implantadas, para conseguir un gasto comparativamente menor a la suma de equipos individuales.
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Bangalore, Mohan Kumar Veeresh. "Rate-and-Power Control Based Energy-Saving Transmissions in Multicarrier Base Stations Using Energy Adaptive Rate Control Algorithm." Thesis, California State University, Long Beach, 2018. http://pqdtopen.proquest.com/#viewpdf?dispub=10839376.

Повний текст джерела
Анотація:

With the amazing increase in mobile data traffic, the fast-growing requirement for, and development of, green communication technology has led to many energy-saving designs in mobile networks. Meanwhile, as advanced cellular technologies progress, more than one component carrier (CC) can now be jointly utilized in a base station (BS).

As a result, the energy consumption of the base station (BS) has become an important concern. In this research, a novel green rate-and-power control transmission scheme is studied and implemented at the BS transmission. The purpose of this scheme is to address the problem of energy minimization at BS transceivers, while maintaining certain quality-of-service and fairness for all users.

Furthermore, the Energy Adaptive Rate Control Algorithm (EARCA) is applied in Stanford University Interim (SUI-3) Channel Model. After adding a fourth energy level to EARCA, and comparing this model with the existing three-level EARCA model, an analysis of how this strategy affects the number of Non-Real Time users and energy consumption was performed.

Стилі APA, Harvard, Vancouver, ISO та ін.
3

Abaalkhail, Rana. "Design and Development of an Intelligent Energy Controller for Home Energy Saving in Heating/Cooling System." Thesis, Université d'Ottawa / University of Ottawa, 2012. http://hdl.handle.net/10393/20576.

Повний текст джерела
Анотація:
Energy is consumed every day at home as we perform simple tasks, such as watching television, washing dishes and heating/cooling home spaces during season of extreme weather conditions, using appliances, or turning on lights. Most often, the energy resources used in residential systems are obtained from natural gas, coal and oil. Moreover, climate change has increased awareness of a need for expendable, energy resources. As a result, carbon dioxide emissions are increasing and creating a negative effect on our environment and on our health. In fact, growing energy demands and limited natural resource might have negative impacts on our future. Therefore, saving energy is becoming an important issue in our society and it is receiving more attention from the research community. This thesis introduces a intelligent energy controller algorithm based on software agent approach that reduce the energy consumption at home for both heating and cooling spaces by considering the user’s occupancy, outdoor temperature and user’s preferences as input to the system. Thus the proposed approach takes into consideration the occupant’s preferred temperature, the occupied and unoccupied spaces, as well as the time spent in each area of the home. A Java based simulator has been implemented to simulate the algorithm for saving energy in heating and cooling systems. The results from the simulator are compared to the results of using HOT2000, which is Canada’s leading residential energy analysis and rating software developed by CanmetENERGY’s Housing, Buildings, Communities and Simulation (HBCS) group. We have calculated how much energy a home modelled will use under emulated conditions. The results showed that the implementation of the proposed energy controller algorithm can save up to 50% in energy consumption in homes dedicated to heating and cooling systems compared to the results obtained by using HOT2000.
Стилі APA, Harvard, Vancouver, ISO та ін.
4

McLellan, P. G. "Control of rectifier equipment used for electrostatic precipitation." Thesis, Open University, 1989. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.375938.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Naghiyev, Eldar. "Device-free localisation in the context of domestic energy saving control methods." Thesis, University of Nottingham, 2014. http://eprints.nottingham.ac.uk/14314/.

Повний текст джерела
Анотація:
A reduction in greenhouse gas emissions by the energy sector is required to decelerate global warming. With the domestic sector being the biggest energy consumer, a great amount of saving potential is available in the operation of dwellings. This thesis is proposing to improve domestic energy efficiency by combining energy saving control measures designed to be made by occupants and automation systems, called Combined Occupant and Automation Control (COAC). It highlights that the occupant’s position is necessary to effectively integrate both of those conservation methods. Three unobtrusive domestic occupant detection technologies were identified and compared for this purpose. Device-free Localisation (DfL), an emerging technology, which was found to be the most suited for a COAC system, was then investigated further by the means of a series of technical experiments. A questionnaire, investigating user perception of DfL and of COAC systems, was conducted. Furthermore, case studies were undertaken, during which three dwellings with real occupants received prototypes of a COAC system, consisting of automated washing appliances and a smart pricing scheme. As part of these case studies, semi-structured interviews were conducted. User preferences with regards to the COAC system’s interface and operation were established. Also, behavioural changes, induced by occupant control methods, were observed. The different studies furthermore found that financial gain was the main incentive to save energy. Automation system’s support in conserving energy was demonstrated to be distinctly appreciated and although security and privacy concerns were prevalent, DfL’s support was also permitted. Furthermore, guidance was developed for DfL setup and operation, especially with regards to using an automation system’s infrastructure for this purpose. In conclusion, this research suggests that the novel concept of integrating DfL and COAC meets the technical and practical requirements for general adoption, and hence provides another tool in the race against global warming.
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Sharifani, Pooya. "Quantification of Human Thermal Comfort for Residential Building's Energy Saving." Thesis, University of North Texas, 2016. https://digital.library.unt.edu/ark:/67531/metadc862744/.

Повний текст джерела
Анотація:
Providing conditioned and fully controlled room is the final goal for having a comfortable building. But on the other hand making smart controllers to provide the required cooling or heating load depending on occupants' real time feeling is necessary. This study has emphasized on finding a meaningful and steady state parameter in human body that can be interpreted as comfort criterion which can be expressed as the general occupants' sensation through their ambient temperature. There are lots of researches on human physiological behavior in different situations and also different body parts reaction to the same ambient situation. Body parts which have the biggest reliable linear fluctuation to the changes are the best subject for this research. For these tests, wrist and palm have been selected and their temperatures on different people have been measured accurately with thermal camera to follow the temperature trend on various comfort levels. It is found that each person reaches to his own unique temperature on these two spots, when he/ she feels comfortable, or in other word each person's body temperature is a precise nominate for comfort feeling of that individual. So in future by having this unique comfort parameter and applying them to the HVAC system temperature control, controlling the dynamic temperature and correlating the indoor condition depending on the occupants instant thermal comfort level, would be a rational choice to bring convenience while energy has been saved more.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Heybroek, Kim. "Saving Energy in Construction Machinery using Displacement Control Hydraulics : Concept Realization and Validation." Licentiate thesis, Linköping University, Linköping University, The Institute of Technology, 2008. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-15588.

Повний текст джерела
Анотація:

In the sector of mobile hydraulics, valve controlled systems are predominant. In these systems the load force and speed are adjusted by control valves. In machines where multiple drives are used in parallel at extremely varying loads the energy efficiency of such systems is often compromised over large working regions. Most valve controlled systems also lack the possibility to recuperate potential energy.

A different category of hydraulic systems, called displacement controlled hydraulics are based on the manipulation of the hydraulic flow using the relative displacement of the hydraulic machines as the final control element. This type of hydrostatic power transfer, yields a resistance free velocity control, ideally leading to lossless load actuation.

This thesis concerns the introduction of a new type of displacement controlled hydraulic system, adapted for construction machinery. The system decouples the hydraulic functions using one dedicated hydraulic machine for each drive. These machines are of open circuit type, capable of over center operation which enables energy recuperation. The system also comprises four separate valves that by means of switching allow the cylinder to be controlled over all four load quadrants. Depending on the selected valve hardware, the system may also include features available in a conventional valve controlled system, such as meter-out flow control. The system supports both symmetrical and asymmetrical cylinders. However, using the asymmetrical type the load may be controlled in two distinct states of operation. This yields an increased region of operation, which is otherwise generally stated as a drawback in displacement controlled systems. It also allows the selection between different control modes, where one of the modes is always more efficient than another.

In this research both theoretical studies and a practical implementation demonstrate the energy related benefits of the new concept. The target application of this study is a medium-size wheel loader. Measurement results using the wheel loader in a short truck loading cycle show a 10% percent reduction in fuel consumption. According to the theoretical investigation, this corresponds to a 20% reduction in energy consumption for the hydraulicsystem itself.

Стилі APA, Harvard, Vancouver, ISO та ін.
8

Chen, S. "Model predictive control of the HVAC system in industrial cleanrooms for energy saving." Thesis, University of Liverpool, 2017. http://livrepository.liverpool.ac.uk/3008038/.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Björklund, Lina. "Energy Audit and Energy Saving Measures of a Large Office Building : Bern 9 in Örnsköldsvik." Thesis, Högskolan i Gävle, Energisystem och byggnadsteknik, 2020. http://urn.kb.se/resolve?urn=urn:nbn:se:hig:diva-32840.

Повний текст джерела
Анотація:
There is a large potential in making the residential and service sector more energy efficient and the first step towards achieving a more efficient use of energy is to implement an energy audit. In this study a property with an approximate area of 8 000 m2, consisting of a main building and three building extensions from different eras has been examined. The main building and its extensions were built in different stages and the first one in the early 20th century and some parts of the last building extension were modified at the time that the examination was carried out. This indicates that there is a vast energy savings potential in the property and an energy audit was performed. The main aim of the study was to examine where the energy was being used and where energy could be saved. Energy saving measures has been suggested together with a calculated approximate energy decrease and payback period. The total energy savings potential for the measures is approximately 146 MWh. The energy audit showed that a large amount of electricity was being used during non-work hours and that energy was lost through the building envelope. The electricity use during non-work hours was examined during the night walk, however, it is suggested to carry out further examinations regarding the property’s vast electricity use during non-work hours. To add loose wool in the roof of B2 has an energy savings potential of 33 000 kWh/year. Another measure is to clean the heat exchangers, this measure has an energy savings potential of 26 000 kWh/year. Also it is suggested to optimize the operational hours for the lighting by implementing presence control and to decrease the energy use for ventilation by cleaning the heat exchangers. Further examinations that would improve the study would be to do measurements of the electricity and temperatures to get a better understanding of the buildings energy use. Also to model the building in a simulation tool would give a calculated energy loss that is more like the actual energy loss of the building and make the results more reliable.
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Jung, Eun-Sun. "Energy efficiency in wireless networks." Texas A&M University, 2005. http://hdl.handle.net/1969.1/2718.

Повний текст джерела
Анотація:
Energy is a critical resource in the design of wireless networks since wireless devices are usually powered by batteries. Battery capacity is finite and the progress of battery technology is very slow, with capacity expected to make little improvement in the near future. Under these conditions, many techniques for conserving power have been proposed to increase battery life. In this dissertation we consider two approaches to conserving the energy consumed by a wireless network interface. One technique is to use power saving mode, which allows a node to power off its wireless network interface (or enter a doze state) to reduce energy consumption. The other is to use a technique that suitably varies transmission power to reduce energy consumption. These two techniques are closely related to theMAC (Medium Access Control) layer. With respect to power saving mode, we study IEEE 802.11 PSM (Power Saving Mechanism) and propose a scheme that improves its energy efficiency. We also investigate the interaction between power saving mode and TCP (Transport Control Protocol). As a second approach to conserving energy, we investigate a simple power control protocol, called BASIC, which uses the maximum transmission power for RTS-CTS and the minimum necessary power for DATA-ACK. We identify the deficiency of BASIC, which increases collisions and degrades network throughput, and propose a power control protocol that addresses these problems and achieves energy savings. Since energy conservation is not an issue limited to one layer of the protocol stack, we study a cross layer design that combines power control at the MAC layer and power aware routing at the network layer. One poweraware routing metric is minimizing the aggregate transmission power on a path from source to destination. This metric has been used along with BASIC-like power control under the assumption that it can save energy, which we show to be false. Also, we show that the power aware routing metric leads to a lower throughput. We show that using the shortest number of hops in conjunction with BASIC-like power control conserves more energy than power aware routing with BASIC-like power control.
Стилі APA, Harvard, Vancouver, ISO та ін.
Більше джерел

Книги з теми "Energy-saving control"

1

Green computing: Tools and techniques for saving energy, money, and resources. Boca Raton: CRC Press, 2014.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Making health care work for American families: Saving money, saving lives : hearing before the Subcommittee on Health of the Committee on Energy and Commerce, House of Representatives, One Hundred Eleventh Congress, first session, April 2, 2009. Washington: U.S. G.P.O., 2012.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

UNESCO Expert Workshop Contribution of Electrochemistry to Energy Conservation and Saving and Environmental Protection (1989 Gaussig Castle). Proceedings of the UNESCO Expert Workshop Contribution of Electrochemistry to Energy Conservation and Saving and Environmental Protection: Gaussing Castle, GDR, October 30-November 3, 1989. Edited by Wiesener Klaus, Technische Universität Dresden, and UNESCO. Regional Office for Science and Technology for Europe. Dresden: Dresden University of Technology, 1989.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

United States. Government Accountability Office. Department of Energy: Improved guidance, oversight, and planning are needed to better identify cost-saving alternatives for managing low-level radioactive waste : report to the Subcommittee on Energy and Water Development, Committee on Appropriations, House of Representatives. Washington, D.C: GAO, 2005.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Energy-saving and Climate Control in Greenhouses with Concertina-shaped Screen, Made of Metallized Complex Film. European Communities / Union (EUR-OP/OOPEC/OPOCE), 1993.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Vaez-Zadeh, Sadegh. Direct Torque Control. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198742968.003.0004.

Повний текст джерела
Анотація:
The fundamental principles of direct torque control (DTC) of permanent magnet synchronous (PMS) motors are presented in this chapter. The basic DTC system is then described. The operating limits of PMS machines under DTC are presented in terms of current limit, voltage limit, and flux linkage limit. Also, flux linkage control, including maximum torque per ampere (MTPA), unity power factor, and flux weakening at high speed, is derived. Then, alternative DTC schemes, including different SVM-DTC schemes, are presented. In line with the increasing energy-saving tendency in industrial applications, major emphasis is placed on the loss minimization of DTC. Finally, a comprehensive comparison was made between the basic DTC and vector control, emphasizing the pros and cons of DTC with respect to vector control.
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Vaez-Zadeh, Sadegh. Control of Permanent Magnet Synchronous Motors. Oxford University Press, 2018. http://dx.doi.org/10.1093/oso/9780198742968.001.0001.

Повний текст джерела
Анотація:
This is the first comprehensive, coherent, and up-to-date book devoted solely to the control of permanent magnet synchronous (PMS) motors, as the fastest growing AC motor. It covers a deep and detailed presentation of major PMS motor modeling and control methods. The readers can find rich materials on the fundamentals of PMS motor control in addition to new motor control methods, which have mainly been developed in the last two decades, including recent advancements in the field in a systematic manner. These include extensive modeling of PMS motors and a full range of vector control and direct torque control schemes, in addition to predictive control, deadbeat control, and combined control methods. All major sensorless control and parameter estimation methods are also studied. The book covers about 10 machine models in various reference frames and 70 control and estimation schemes with sufficient analytical and implementation details including about 200 original figures. A great emphasis is placed on energy-saving control schemes. PMS motor performances under different control systems are presented by providing simulation and experimental results. The past, present, and future of the PMS motor market are also discussed. Each chapter concludes with end-chapter problems and focussed bibliographies. It is an essential source for anyone working on PMS motors in academic and industry sectors. The book can be used as a textbook with the first four chapters for a primary graduate course and the final three chapters for an advanced course. It is also a crucial reading for researchers, design engineers, and experts in the field.
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Proceedings of the UNESCO Expert Workshop Contribution of Electrochemistry to Energy Conservation and Saving and Environmental Protection: Gaussing Castle, GDR, October 30-November 3, 1989. Dresden University of Technology, 1990.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

B, Linnhoff, and Institution of Chemical Engineers (Great Britain), eds. A User guide on process integration for the efficient use of energy. Rugby, Warks: The Institution of Chemical Engineers, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Townsend, David W., B. Linnhoff, and D. Boland. A User Guide on Process Integration for the Efficient Use of Energy. Institution of Chemical Engineers, IChemE, 1994.

Знайти повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Частини книг з теми "Energy-saving control"

1

Xu, Xian-wei, Jin-bao Xu, Yang Liu, Nan Hu, and JIan-xin Gao. "Saving Energy Control of Auxiliary Fan." In Advanced Research on Computer Education, Simulation and Modeling, 33–39. Berlin, Heidelberg: Springer Berlin Heidelberg, 2011. http://dx.doi.org/10.1007/978-3-642-21802-6_6.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Sun, Weichao, Huijun Gao, and Peng Shi. "Energy Saving Control Strategies: Motor-Driven Active Suspension." In Advanced Control for Vehicle Active Suspension Systems, 219–31. Cham: Springer International Publishing, 2019. http://dx.doi.org/10.1007/978-3-030-15785-2_8.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Iwamura, Makoto, and Werner Schiehlen. "Control and Experiments with Energy-Saving SCARA Robots." In ROMANSY 21 - Robot Design, Dynamics and Control, 153–61. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-33714-2_17.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Zhang, Zhiyuan, Guoqing Zhang, and Zhizhong Guo. "Intelligent Control of Energy-Saving Power Generation System." In Intelligent Computing for Sustainable Energy and Environment, 541–48. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-37105-9_60.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Ladanyuk, Anatoliy, Olena Shkolna, and Vasil Kyshenko. "Automation of Evaporation Plants Using Energy-Saving Technologies." In Recent Advances in Systems, Control and Information Technology, 220–26. Cham: Springer International Publishing, 2016. http://dx.doi.org/10.1007/978-3-319-48923-0_27.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Choi, Kwang-Soon, Young-Choong Park, Yang-Keun Ahn, Kwang-Mo Jung, Sukil Hong, and Ha-Bong Chung. "Energy Saving System for Home Energy Measurement and Efficient Power Control." In Advances in Intelligent and Soft Computing, 21–26. Berlin, Heidelberg: Springer Berlin Heidelberg, 2012. http://dx.doi.org/10.1007/978-3-642-27329-2_4.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Zhang, Lei, and Xuehui Wang. "Energy-Saving Topology Control for Heterogeneous Ad Hoc Networks." In Lecture Notes in Computer Science, 313–22. Berlin, Heidelberg: Springer Berlin Heidelberg, 2009. http://dx.doi.org/10.1007/978-3-642-03644-6_24.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Lisienko, V. G. "Mathematical Modelling of Energy-Technological Units and Control Models in Energy Saving." In NATO ASI Series, 235–48. Dordrecht: Springer Netherlands, 1997. http://dx.doi.org/10.1007/978-94-017-2962-8_18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Farid, Mohammed, Amar Auckaili, and Gohar Gholamibozanjani. "Energy Saving, Peak Load Shifting and Price-Based Control Heating." In Thermal Energy Storage with Phase Change Materials, 159–61. Boca Raton: CRC Press, 2021. http://dx.doi.org/10.1201/9780367567699-12.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

Song, Chao, and Jia Xu. "Design and Simulation of Power Grid Energy Saving Control Model." In Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, 201–14. Cham: Springer International Publishing, 2020. http://dx.doi.org/10.1007/978-3-030-51103-6_18.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Тези доповідей конференцій з теми "Energy-saving control"

1

"Modern Energy-Saving Electrotechnologies." In 2019 XXI International Conference Complex Systems: Control and Modeling Problems (CSCMP). IEEE, 2019. http://dx.doi.org/10.1109/cscmp45713.2019.8976530.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Izumi, T. "Energy saving manipulator by regenerating conservative energy." In 6th International Workshop on Advanced Motion Control. Proceedings. IEEE, 2000. http://dx.doi.org/10.1109/amc.2000.862954.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Welhenge, Anuradhi Malshika. "Lighting Control System for Energy Saving." In 2014 8th Asia Modelling Symposium (AMS). IEEE, 2014. http://dx.doi.org/10.1109/ams.2014.21.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
4

Su, Shuai, Tao Tang, Clive Roberts, and Ling Huang. "Cooperative train control for energy-saving." In 2013 IEEE International Conference on Intelligent Rail Transportation (ICIRT). IEEE, 2013. http://dx.doi.org/10.1109/icirt.2013.6696259.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
5

Zhang Jing-xiao, Li Hui, and Bai Li. "Life cycle influnce mechanism of energy-saving chain management on energy-saving building construction." In 2010 International Conference on Mechanic Automation and Control Engineering (MACE). IEEE, 2010. http://dx.doi.org/10.1109/mace.2010.5536595.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
6

Luo, Qubo, Shi-Yin Li, Jin-Lei Wu, and Yan-Jing Sun. "Energy-saving coverage algorithm of WSN." In 2009 Chinese Control and Decision Conference (CCDC). IEEE, 2009. http://dx.doi.org/10.1109/ccdc.2009.5192836.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
7

Wang, Weiwen, and Wenjian Wang. "Energy Saving in Methylchlorosilane Distillation." In 2012 International Conference on Computer Distributed Control and Intelligent Environmental Monitoring (CDCIEM). IEEE, 2012. http://dx.doi.org/10.1109/cdciem.2012.75.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
8

Liu, Song, and Bin Yao. "Coordinate Control of Energy-Saving Programmable Valves." In ASME 2003 International Mechanical Engineering Congress and Exposition. ASMEDC, 2003. http://dx.doi.org/10.1115/imece2003-42668.

Повний текст джерела
Анотація:
The energy-saving programmable valve, a unique combination of five independent cartridge valves, not only decouples the control of meter-in and meter-out flows but also provides the ability of precisely controlling cross-port flows for energy-saving purpose. Our previous works have already shown that the tremendous control flexibility gained by the proposed hardware re-configuration enables one not only to achieve precision control of the cylinder motion but also to decrease the energy usage significantly through actively utilizing the potential and kinetic energy of the load in accomplishing certain tasks such as smooth stopping. However, the control of such an essentially multi-input valve system to achieve the above objectives is far from trivial. In our previous works, a constant off-side pressure was assumed in the controller design for simplicity. This assumption may not be realistic in certain circumstances where the off-side pressure may vary from the assumed constant pressure significantly, especially right after the change of working mode. As a result, though the controller design is simplified, larger tracking error results during the transients. This paper presents an improved way to coordinately control the five independent valves by incorporating the off-side pressure dynamics into the controller design. The Adaptive Robust Control technique is applied to guarantee the stability and tracking performance in the presence of large system parameter variations and disturbances. Simulation and experimental results are shown to verify the much improved control performance of the presented coordinate control strategy.
Стилі APA, Harvard, Vancouver, ISO та ін.
9

Xue-Qian Hu and Yuan-Ming Wu. "An energy saving topology control algorithm research." In 2009 International Conference on Apperceiving Computing and Intelligence Analysis (ICACIA 2009). IEEE, 2009. http://dx.doi.org/10.1109/icacia.2009.5361160.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
10

"Research on Locomotive Energy-saving Control System." In 2018 5th International Conference on Electrical & Electronics Engineering and Computer Science. Francis Academic Press, 2018. http://dx.doi.org/10.25236/iceeecs.2018.114.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.

Звіти організацій з теми "Energy-saving control"

1

Lu, Yan, Zhen Song, Vivian Loftness, Kun Ji, Sam Zheng, Bertrand Lasternas, Flore Marion, and Yu Yuebin. Advanced, Integrated Control for Building Operations to Achieve 40% Energy Saving. Office of Scientific and Technical Information (OSTI), October 2012. http://dx.doi.org/10.2172/1059657.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
2

Webster, Tom. Chiller Controls-related Energy Saving Opportunities in FederalFacilities. Office of Scientific and Technical Information (OSTI), January 2003. http://dx.doi.org/10.2172/860769.

Повний текст джерела
Стилі APA, Harvard, Vancouver, ISO та ін.
3

Osterhaus, Werner, and Niko Gentile, eds. Literature review - Energy saving potential of user-centered integrated lighting solutions. IEA SHC Task 61, October 2021. http://dx.doi.org/10.18777/ieashc-task61-2021-0013.

Повний текст джерела
Анотація:
Measures for the reduction of electric energy loads for lighting have predominantly focussed on increasing the efficiency of lighting systems. This efficiency has now reached levels unthinkable a few decades ago. However, a focus on mere efficiency is physically limiting, and does not necessarily ensure that the anticipated energy savings actually materialize. There are technical and non-technical reasons because of which effective integration of lighting solutions and their controls, and thus a reduction in energy use, does not happen.
Стилі APA, Harvard, Vancouver, ISO та ін.
Також вас можуть зацікавити розширені добірки на тему "Energy-saving control" для конкретних типів джерел:
Статті в журналах Дисертації
Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!

До бібліографії