Дисертації з теми "Energy Dispersive Analysis X-ray (EDAX)"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-30 дисертацій для дослідження на тему "Energy Dispersive Analysis X-ray (EDAX)".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Canli, Sedat. "Thickness Analysis Of Thin Films By Energy Dispersive X-ray Spectroscopy." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/12612822/index.pdf.
Повний текст джерелаSlater, Thomas Jack Alfred. "Three dimensional chemical analysis of nanoparticles using energy dispersive X-ray spectroscopy." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/three-dimensional-chemical-analysis-of-nanoparticles-using-energy-dispersive-xray-spectroscopy(3eb607a2-eb03-4d45-b9eb-71b0ca45c2db).html.
Повний текст джерелаKumari, Maini S. M. "Development of a breast tissue diffraction analysis system using energy dispersive X-ray diffraction." Thesis, University College London (University of London), 2012. http://discovery.ucl.ac.uk/1370578/.
Повний текст джерелаMenendez-Alonso, Elena. "Trace metal and speciation analysis using ion-exchange and energy dispersive X-ray fluorescence spectrometry." Thesis, University of Plymouth, 2000. http://hdl.handle.net/10026.1/896.
Повний текст джерелаCook, Emily Jane. "Analysis of energy dispersive x-ray diffraction profiles for material identification, imaging and system control." Thesis, University College London (University of London), 2008. http://discovery.ucl.ac.uk/1446057/.
Повний текст джерелаGullayanon, Rutchanee. "A calibration methodology for energy dispersive X-ray fluorescence measurements based upon synthetically generated reference spectra." Diss., Georgia Institute of Technology, 2011. http://hdl.handle.net/1853/42771.
Повний текст джерелаChisholm, Daniel J. "Use of Principle Component Analysis for the identification and mapping of phases from energy-dispersive x-ray spectra." Thesis, Monterey, Calif. : Springfield, Va. : Naval Postgraduate School ; Available from National Technical Information Service, 1999. http://handle.dtic.mil/100.2/ADA359572.
Повний текст джерелаParajuli, Prabin. "EXPERIMENTAL INVESTIGATION OF CORROSION OF COATED CAST IRON ROTORS IN THE AUTOMOTIVE INDUSTRY." OpenSIUC, 2020. https://opensiuc.lib.siu.edu/theses/2711.
Повний текст джерелаGreen, Heather F. "Casting no shadow : overlapping soilscapes of European-Indigenous interaction in northern Sweden." Thesis, University of Stirling, 2012. http://hdl.handle.net/1893/13133.
Повний текст джерелаYamane, H., T. Kawano, K. Tatsumi, Y. Fujimichi, and S. Muto. "Site occupancy determination of Eu/Y doped in Ca2SnO4 phosphor by electron channeling microanalysis." Elsevier, 2011. http://hdl.handle.net/2237/20827.
Повний текст джерелаLeek, Darrell Stewart. "A study of the effects of chloride and sulphate on the hydration of portland cement and the corrosion of carbon steel reinforcement using electron-optical techniques and energy dispersive X-ray analysis." Thesis, Queen Mary, University of London, 1997. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.265400.
Повний текст джерелаNasser, Hisham. "Thermally Stimulated Current Study Of Traps Distribution In Tlgases Layered Single Crystals." Master's thesis, METU, 2010. http://etd.lib.metu.edu.tr/upload/3/12611866/index.pdf.
Повний текст джерела160 K with various heating rates between 0.6&ndash
1.2 K/s. Experimental evidence has been found for the presence of three electrons trapping centres with activation energies 12, 20, and 49 meV and one hole trapping centre located at 12 meV. Their capture cross-sections and concentrations were also determined. It is concluded that in these centres retrapping is negligible as confirmed by the good agreement between the experimental results and the theoretical predictions of the model that assumes slow retrapping. The optical properties of TlGaSeS layered single crystals have been investigated by measuring the transmission and the reflection in the wavelength region between 400 and 1100 nm. The optical indirect transitions with a band gap energy of 2.27 eV and direct transitions with a band gap energy of 2.58 eV were found by analyzing the absorption data at room temperature. The rate of change v of the indirect band gap with temperature was determined from the transmission measurements in the temperature range of 10&ndash
300 K. The oscillator and the dispersion energies, the oscillator strength, and the zero-frequency refractive index were also reported. The parameters of monoclinic unit cell and the chemical composition of TlGaSes crystals were found by X-ray powder diffraction and energy dispersive spectroscopic analysis, respectively.
Isik, Mehmet. "Thermally Stimulated Current Study Of Traps Distribution In Beta-tlins2 Layered Crystals." Master's thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609667/index.pdf.
Повний текст джерелаGoksen, Kadir. "Optical Properties Of Some Quaternary Thallium Chalcogenides." Phd thesis, METU, 2008. http://etd.lib.metu.edu.tr/upload/12609442/index.pdf.
Повний текст джерела10-3-110.34 W cm-2 ranges, respectively, suggested that the observed bands were originated from the recombination of electrons with the holes by realization of donor-acceptor or free-to-bound type transitions. Transmission-reflection measurements in the wavelength range of 400-1100 nm revealed the values of indirect and direct band gap energies of the crystals studied. By the temperature-dependent transmission measurements in 10-300 K range, the rates of change of the indirect band gap of the samples with temperature were found to be negative. The oscillator and dispersion energies, and zero-frequency refractive indices were determined by the analysis of the refractive index dispersion data using the Wemple&ndash
DiDomenico single-effective-oscillator model. Furthermore, the structural parameters of all crystals were defined by the analysis of X-ray powder diffraction data. The determination of the compositional parameters of the studied crystals was done by energy dispersive spectral analysis experiments.
Zhang, Shuo. "The Performance and Service Life Prediction of High Performance Concrete in Sulfate and Acidic Environments." FIU Digital Commons, 2015. http://digitalcommons.fiu.edu/etd/2260.
Повний текст джерелаSampaio, Felipe Cavalcanti. "Microanálise de superfície e caracterização química de cimentos endodônticos." Universidade Federal de Goiás, 2013. http://repositorio.bc.ufg.br/tede/handle/tede/8569.
Повний текст джерелаApproved for entry into archive by Luciana Ferreira (lucgeral@gmail.com) on 2018-06-12T12:21:36Z (GMT) No. of bitstreams: 2 Dissertação - Felipe Cavalcanti Sampaio - 2013.pdf: 1683727 bytes, checksum: 6cab873178ad2e097fe434f4aa8fca34 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5)
Made available in DSpace on 2018-06-12T12:21:36Z (GMT). No. of bitstreams: 2 Dissertação - Felipe Cavalcanti Sampaio - 2013.pdf: 1683727 bytes, checksum: 6cab873178ad2e097fe434f4aa8fca34 (MD5) license_rdf: 0 bytes, checksum: d41d8cd98f00b204e9800998ecf8427e (MD5) Previous issue date: 2013-01-15
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior - CAPES
Purpose: to assess the surface and evaluate the chemical composition of root canal filling materials by scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). Methods: eighteen polyethylene standard tubes were filled with the tested materials: Sealapex®, Sealer 26®, MTA Fillapex®, Pulp Canal Sealer®, Endofill® and AH Plus®. After 48 hours at 37°C and 95% relative humidity, the samples were surface-sputtered with gold, led to SEM and the images analyzed at 5,000X magnification. Then, the elements distribution and chemical composition were determined by EDX. The results were evaluated qualitatively (SEM images and elements distribution maps) and quantitatively (weight percentage). Results: the surface analysis revealed that the sealers presented different regularities, with an uniform distribution of elements, with particles of similar sizes and variable shapes in EDX microanalysis. Calcium oxide and hydroxide based sealers (Sealapex® and Sealer 26®) presented calcium peaks of 53.58wt.% and 65.00wt.%, respectively. MTA Fillapex® presented 30.58wt.% of calcium and high amounts of silicon (31.02 weight%) and bismuth (27.38 weight%). Zinc oxide and eugenol based sealers, Pulp Canal Sealer® and Endofill®, showed zinc quantities of 67.74wt% and 63.16wt.%, respectively. AH Plus® had higher amount of zirconium (64.24wt.%). The materials presented elements incompatible with the composition described by the manufacturer. Conclusions: the root canal sealers’ surfaces showed different. The elements presented uniform distribution, with particles of similar sizes and variable shapes. Chemical elements were found in the root canal sealers not described by the manufacturers.
Objetivo: analisar a superfície e avaliar a composição química de materiais obturadores do canal radicular por meio de microscopia eletrônica de varredura (MEV) e espectroscopia de dispersão de raios-X (EDX). Material e métodos: dezoito tubos de polietileno padronizados foram preenchidos com os materiais avaliados (n=3): Sealapex®, Sealer 26®, MTA Fillapex®, Pulp Canal Sealer®, Endofill® e AH Plus®. Após 48 horas a 37°C e umidade relativa de 95%, as amostras foram metalizadas com ouro, conduzidas ao MEV e as imagens da superfície analisadas em um aumento de 5.000X. A seguir, a distribuição dos elementos e composição química foram determinadas por meio de EDX. Os resultados foram avaliados qualitativamente (imagens do MEV e mapas de distribuição de elementos) e quantitativamente (porcentagem em peso). Resultados: a análise da superfície revelou que os cimentos apresentaram diferentes regularidades em imagens por MEV. As partículas apresentaram-se com distribuição uniforme dos elementos, com tamanhos similares e formas variáveis em microanálises por EDX. Os cimentos à base de óxido ou hidróxido de cálcio (Sealapex® e Sealer 26®) apresentaram quantidades de cálcio de 53,58%p (porcentagem de peso atômico) e 65,00%p, respectivamente, em microanálises por EDX. O cimento MTA Fillapex® apresentou 30,58%p de cálcio e elevadas quantidades de silício (31,02%p) e bismuto (27,38%p). Os cimentos contendo óxido de zinco e eugenol, Pulp Canal Sealer® e Endofill®, apresentaram zinco em quantidades de 67,74%p e 63,16%p, respectivamente. O AH Plus® apresentou maior quantidade de zircônia (64,24%p). Foram encontrados elementos não compatíveis com a composição descrita pelo fabricante. Conclusões: as superfícies dos cimentos endodônticos mostraram diferentes regularidades. As partículas apresentaram distribuição uniforme, com tamanhos similares, porém com formas variadas. Foram encontrados nos cimentos endodônticos elementos químicos que não foram descritos pelos fabricantes.
Haibo, E. "Quantitative analysis of core-shell nanoparticle catalysts by scanning transmission electron microscopy." Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:19c3b989-0ffb-487f-8cb3-f6e9dea83e63.
Повний текст джерелаKleinhans, Henrik. "Evaluation of the Carbonization of Thermo-Stabilized Lignin Fibers into Carbon Fibers." Thesis, Linköpings universitet, Kemi, 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:liu:diva-120519.
Повний текст джерелаKrummenauer, Alex. "Desenvolvimento e validação de metodologia analítica para análise de aços por espectrometria de fluorescência de raios X por dispersão de energia (EDXRF)." reponame:Biblioteca Digital de Teses e Dissertações da UFRGS, 2017. http://hdl.handle.net/10183/178232.
Повний текст джерелаThe development and validation of analytical methods is a required procedure when a non-standard method is used by a testing laboratory. Method validation is also a specific requirement of the ABNT NBR ISO / IEC 17025, which determines the general requirements for the competence of testing and calibration laboratories. The purpose of validation is to demonstrate that the analytical method, under the conditions in which it is performed, produces results with the required accuracy. The Corrosion, Protection and Recycling Materials Laboratory (LACOR), at UFRGS, has the X-ray fluorescence metal analysis, accredited by CGCRE / INMETRO, according to ABNT NBR ISO / IEC 17025. The test is performed using Energy Dispersive X-Ray Fluorescence spectrometry, EDXRF method. This method, however, is not standardized; therefore, it was validated in this research to meet this requirement. The validation was based on the DOQ-CGCRE-08 document and the EURACHEM guide. The method performance calculated in this study for quantitative testing by EDXRF are: selectivity; limit of detection (LOD) and limit of quantification (LOQ); linearity and working range; trueness (bias, normalized error, Z-score and comparison with reference method) and precision (repeatability, intermediate precision and reproducibility). In addition, a measurement uncertainty calculation methodology was developed for the EDXRF testing The results obtained in this study demonstrate that the EDXRF method, used in the determination in the chemical analysis of steels, is a validated non-standard method and compatible with the results obtained with the reference methods: Wavelength Dispersive X-Ray Fluorescence spectrometry (WDXRF), photometric and atomic absorption spectrometry (AAS). In addition, WDXRF is a reference method used in many international standards, which describes analysis of steels by X-ray fluorescence spectrometry such ASTM E572 or ASTM E1085. The study developed in this dissertation allowed LACOR to maintain its accreditation in the test of metal by X-ray fluorescence analysis, in the CGCRE / INMETRO audit, this year. Other fruits of this work were the preparation of calibration curves of NITON XL3t GOLDD + spectrometer and complete revision of testing procedure, where this new knowledge about the EDXRF technique was applied. In the future, this work can be used by other researchers to develop studies in other base metals such as copper, aluminum, titanium or nickel, and also in other areas of application such as jewelry, recycling of metallic materials or even for analysis elemental residues retained in ion exchange membranes.
Chen, Yiqiang. "High-resolution microstructural and microanalysis studies to better understand the thermodynamics and diffusion kinetics in an advanced Ni-based superalloy RR1000." Thesis, University of Manchester, 2015. https://www.research.manchester.ac.uk/portal/en/theses/highresolution-microstructural-and-microanalysis-studies-to-better-understand-the-thermodynamics-and-diffusion-kinetics-in-an-advanced-nibased-superalloy-rr1000(1d4e96e0-b362-484e-82cb-bec18cab850b).html.
Повний текст джерелаTrueman, Anthony Roger. "Characterization and corrosion studies of high carbon tool steel/tungsten carbide metal matrix composites." Thesis, Queensland University of Technology, 1999.
Знайти повний текст джерела汪毓人. "Identification of Automotive Paint Chips by Pyrolysis/ Gas Chromatography (Py/GC) and Scanning Electron Microscopy/ Energy Dispersive X-Ray Analysis (SEM/EDX)." Thesis, 1994. http://ndltd.ncl.edu.tw/handle/08134902094273720299.
Повний текст джерела汪毓人. "Identification of Automitive Paint Chips by Pyrolysis/ Gas Chromatography (Py/GC) and Scanning Electron Microscopy/ Energy Dispersive X-Ray Analysis (SEM/EDX)." Thesis, 1993. http://ndltd.ncl.edu.tw/handle/jjepa9.
Повний текст джерелаCarvalho, Patrícia Miguel da Silva. "Energy Dispersive X-ray Fluorescence Analysis Imaging—Development and Applications." Master's thesis, 2022. http://hdl.handle.net/10362/135615.
Повний текст джерелаAs técnicas de análise por Fluorescência de Raios-X Dispersiva em Energia (EDXRF) apresentam características únicas para a avaliação do conteúdo elemental de diversas amostras, tais como o seu carácter não destrutivo, elevada sensibilidade ou custo reduzido. Muitos estudos têm-se focado na determinação de variações da concentração elemental entre tecidos normais e tumorais, para comparar e correlacionar resultados com diversos factores, como o tipo e estádio de tumores ou a idade e sexo dos doentes. O mapeamento da distribuição elemental poderá também providenciar informações importantes sobre este tipo de amostras, que contribuam para a diferenciação entre tecido com e sem patologia, através da identificação de regiões de acumulação ou depleção de elementos e da demarcação de margens tumorais. Os principais objectivos deste trabalho são a determinação da concentração elemental em amostras pareadas de tecidos com e sem patologia tumoral, e o mapeamento da distribuição elemental correspondente. Para tal, é introduzida uma metodologia melhorada para a quantificação elemental em tecidos biológicos, que permite ultrapassar as limitações (e.g., o número reduzido de amostras estudadas) que têm levado à obtenção de resultados pouco precisos e estatisticamente irrelevantes. Apresenta-se também um sistema de imagem full-field EDXRF (FF-XRF) baseado no detector gasoso micro-estruturado 2D Thick-COBRA (2D-THCOBRA), como uma alternativa inovadora, de instrumentação simples e custo reduzido, para detecção e mapeamento elemental em amostras biológicas. Foram analisados diferentes conjuntos de amostras de tecidos com e sem patologia tumoral, tendo sido possível quantificar a variação de elementos leves (e.g., K) e pesados (e.g., Fe e Zn). No entanto, a contribuição destes resultados para estudos de patologias tumorais é mínima devido ao número reduzido de amostras. De modo a ultrapassar esta limitação, foram analisadas amostras espelhadas de tecidos "frescos" e preservados em parafina. Verificou-se que este processo de preservação altera o contéudo elemental dos tecidos, propondo-se a sua monitorização em cada estágio. O sistema de imagem FF-XRF baseado no detector 2D-THCOBRA foi utilizado no mapeamento de amostras pareadas de tecido normal e tumoral. Foram detectados elementos presentes em quantidades reduzidas (alguns μg/g) e a sua distribuição foi mapeada. Verificou-se a distribuição homogénea de todos os elementos, à excepção de Ca em tecido tumoral do pulmão; e foram identificados aglomerados de cálcio que poderão ser uma característica de tumores malignos. O sistema FF-XRF foi também aplicado no mapeamento de peixes Zebra expostos a metais pesados, tendo sido verificada a acumulação de Mn, Se e Pb na zona intestinal dos peixes analisados. Apesar da adequação do sistema para este tipo de aplicações, permanece a necessidade de aumentar a eficiência de detecção. Neste sentido, é introduzido o sistema de imagem full-field iFluX, com um painel detector de raios-X de grande área baseado numa estrutura 2D-THCOBRA redesenhada.
"Determination of Fe, Cu and Zn in human plasma by energy dispersive X-ray fluorescence spectrometry." Chinese University of Hong Kong, 1993. http://library.cuhk.edu.hk/record=b5887819.
Повний текст джерелаThesis (M.Phil.)--Chinese University of Hong Kong, 1993.
Includes bibliographical references (leaves 93-95).
ACKNOWLEDGEMENT --- p.i
ABSTRACT --- p.ii
Chapter CHAPTER 1 --- INTRODUCTION --- p.1
Chapter 1.1 --- General Introduction --- p.1
Chapter 1.2 --- "Clinical Significance of Fe, Cu and Zn" --- p.2
Chapter 1.3 --- Alternative Methods of Analysis --- p.5
Chapter 1.4 --- Principles of Energy Dispersive X-ray Fluorescence Spectrometry --- p.11
Chapter 1.5 --- Research Plan --- p.20
Chapter CHAPTER 2 --- EXPERIMENTAL --- p.22
Chapter 2.1 --- Energy Dispersive X-ray Fluorescence Analysis --- p.22
Chapter 2.1.1 --- Apparatus --- p.22
Chapter 2.1.2 --- Reagents --- p.25
Chapter 2.1.3 --- Procedure --- p.28
Chapter 2.2 --- Atomic Absorption Spectrometric Analysis --- p.32
Chapter 2.2.1 --- Apparatus --- p.32
Chapter 2.2.2 --- Reagents --- p.32
Chapter 2.2.3 --- Procedure --- p.34
Chapter CHAPTER 3 --- RESULTS AND DISCUSSION --- p.38
Chapter 3.1 --- Optimisation of Excitation Conditions --- p.38
Chapter 3.1.1 --- Effect of Filter --- p.38
Chapter 3.1.2 --- Effect of Tube Voltage --- p.43
Chapter 3.1.3 --- Effect of Tube Current --- p.44
Chapter 3.2 --- Optimisation of Preconcentration Procedure --- p.46
Chapter 3.2.1 --- Effect of Sample Area and Collimator Size --- p.46
Chapter 3.2.2 --- Effect of pH --- p.51
Chapter 3.2.3 --- Effect of Ligand Concentration --- p.54
Chapter 3.2.4 --- Effect of Mixing Time --- p.57
Chapter 3.2.5 --- Effect of Standing Time --- p.59
Chapter 3.2.6 --- Study of Sample Homogeneity --- p.61
Chapter 3.3 --- Optimisation for Deproteination --- p.63
Chapter 3.3.1 --- Effect of Different Protein Precipitants --- p.63
Chapter 3.3.2 --- Effect of Trichloroacetic Acid Concentration --- p.65
Chapter 3.3.3 --- Effect of Hydrochloric Acid Concentration --- p.67
Chapter 3.3.4 --- Effect of Temperature --- p.69
Chapter 3.3.5 --- Effect of Incubation Time --- p.71
Chapter 3.4 --- Study of Blanks --- p.74
Chapter 3.5 --- Construction of Calibration Curves --- p.77
Chapter 3.6 --- Determination of Detection Limit and Sensitivity --- p.84
Chapter 3.7 --- Accuracy and Reproducibility Tests --- p.86
Chapter 3.8 --- Parallel Check --- p.89
Chapter CHAPTER 4 --- CONCLUSION --- p.92
REFERENCES --- p.93
Guettler, Barbara Elisabeth. "Effect of Thermal and Chemical Treatment of Soy Flour on Soy-Polypropylene Composite Properties." Thesis, 2012. http://hdl.handle.net/10012/6702.
Повний текст джерела"Determination of some minor elements in cement by energy dispersive x-ray fluorescence spectrometry and determination of mercury in water by static cold vapour atomic absorption spectrometry." Chinese University of Hong Kong, 1994. http://library.cuhk.edu.hk/record=b5887279.
Повний текст джерелаThesis (M.Phil.)--Chinese University of Hong Kong, 1994.
Includes bibliographical references (leaves 131-133).
Acknowledgement
Abstract --- p.1
General introduction --- p.4
Part I Determination of Some Minor Elements in Cement by Energy Dispersive X-Ray Fluorescence Spectrometry
Introduction --- p.7
Experimental --- p.14
Results and discussions --- p.18
Part II Determination of Mercury in Water by Static Cold Vapour Atomic Absorption Spectrometry
Introduction --- p.78
Experimental --- p.84
Results and discussions --- p.89
Conclusion --- p.130
References --- p.131
Riego, Daniela Alejandra. "Análisis de contenido de fósforo en cáncer mamario por microfluorescencia de rayos X." Bachelor's thesis, 2022. http://hdl.handle.net/11086/23640.
Повний текст джерелаEn el presente trabajo, se ha implementado el Microanálisis por Fluorescencia de Rayos X para el estudio de tejidos neoplásicos. Esta técnica permite un análisis multielemental simultáneo no destructivo, simplificando la tarea laboriosa que implica el análisis elemental tradicional por histoquímica. En particular la micro-XRF permite el monitoreo de fósforo cuya presencia está asociada a microcalcificaciones y al metabolismo tumoral. El fósforo, muestra un incremento significativo en tumores malignos por lo que recientemente se lo ha empezado a emplear como posible biomarcador en modelos de prognosis del cáncer de mama. Estudios preliminares llevados a cabo por el grupo de investigación del presente trabajo han mostrado la viabilidad de la metodología propuesta particularmente aplicada en la determinación de fósforo.
In the present work, the X-Ray Fluorescence Microanalysis (micro-XRF) was implemented for the study of neoplastic tissues. Through this non-destructive technique, precise quantification of phosphorus and calcium in neoplasms of a murine model of breast cancer was achieved with the purpose of being able to distinguish malignant and benign lesions according to the variety of calcified crystals and also using phosphorus content as an indicator of tumor activity and progression. The experimental tasks and data processing processes were further supported by the simulation of radiation transport by Monte Carlo techniques using the open-source program XMI-MSIM.
Fil: Riego, Daniela Alejandra. Universidad Nacional de Córdoba. Facultad de Matemática, Astronomía, Física y Computación; Argentina.
Guettler, Barbara Elisabeth. "Soy-Polypropylene Biocomposites for Automotive Applications." Thesis, 2009. http://hdl.handle.net/10012/4427.
Повний текст джерелаMatjie, Ratale Henry. "Sintering and slagging of mineral matter in South African coals during the coal gasification process." Thesis, 2008. http://upetd.up.ac.za/thesis/available/etd-11112008-125913.
Повний текст джерела