Дисертації з теми "Emu oil"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 дисертацій для дослідження на тему "Emu oil".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте дисертації для різних дисциплін та оформлюйте правильно вашу бібліографію.
Dvorak, Laura D. "Effect of emu oil on dermal wound healing in a rat model /." Free to MU Campus, others may purchase, 2004. http://wwwlib.umi.com/cr/mo/fullcit?p1422922.
Повний текст джерелаGunther, Joshua William. "DEVELOPING CHEMICALLY MUTAGENIZED EMS FORREST SOYBEAN POPULATION FOR HIGH OIL PROFILE." OpenSIUC, 2015. https://opensiuc.lib.siu.edu/theses/1825.
Повний текст джерелаBrookes, Peter Robert. "Detoxification of point source industrial wastewater using an Extractive Membrane Bioreactor (EMB)." Thesis, Imperial College London, 1996. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.364062.
Повний текст джерелаCampolmi, Alessia. "Essays on open economic, inflation and labour markets." Doctoral thesis, Universitat Pompeu Fabra, 2008. http://hdl.handle.net/10803/7367.
Повний текст джерелаIn these last years there has been an increasing literature developing DSGE Open Economy Models with market imperfections and nominal rigidities. It is the so called "New Open Economy Macroeconomics". Within this class of models the first chapter analyses the issue of whether the monetary authority should target Consumer Price Index (CPI) inflation or domestic inflation. It is shown that the introduction of monopolistic competition in the labour market and nominal wage rigidities rationalise CPI inflation targeting. In the second chapter we introduce matching and searching frictions in the labour market and relate different labour market structures across European countries with differences in the volatility of inflation across the same countries. In the last chapter we use a two-country model with oil in the production function and price and wage rigidities to relate movements in wage and price inflation, real wages and GDP growth rate to oil price changes.
Dallaire, Antonin. "Un modèle pour la séparation d'une émulsion huile-eau /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 1997. http://theses.uqac.ca.
Повний текст джерелаCrawford, James R. "The economic behaviour of the oil firm." Thesis, University of Oxford, 1986. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.303502.
Повний текст джерелаDridi, Wafa. "Influence de la formulation sur l'oxydation des huiles végétales en émulsion eau-dans-huile." Thesis, Bordeaux, 2016. http://www.theses.fr/2016BORD0102/document.
Повний текст джерелаOxidation is ubiquitous in lipids and causes degradation of organoleptic and nutritional qualities of foods. Lipid oxidation depends on various parameters (temperature, light, transition metals, lipid dispersion state …) that have to be controlled during food processing and storage. In this context, lipid oxidation was followed by measuring the content of primary oxidation products, for lipids in bulk phase and in water-in-oil emulsions. Different edible oils were chosen for their contents of α-linolenic acid (18: 3 n-3). Emulsions were formulated at varying polyglycerol polyricinoleate (PGPR)/distilled monoglycerides concentration ratios (surfactant ratio), with or without the presence of pro-oxydant metals or chelators. In all experiments, the aqueous volume fraction (40%) and the droplet mean diameter (1 μm) remained constant. Besides this study, an innovative and rapid method based on differential microcalorimetry was developed for monitoring the kinetics of lipid oxidation. The oxidability of the studied oils was related to their content in α-linolenic acid according the following order: linseed oil> camelina oil> rapeseed oil> olive oil. The rate of lipid oxidation increased with the iron sulfate concentration in the water phase. The iron valence or the replacement of iron by copper had no significant impact on the oxidation kinetics. However, both the chemical nature of the counter ion (molecular weight, chelating power) and the proportion of PGPR used to stabilize the emulsions were influential factors. On the whole, our results suggest that surfactants at the water-oil interface do not prevent pro-oxidant species to interact with lipids in the continuous phase but that their organization at the interface is a key parameter for controlling lipid oxidation
Salisu, Mohammed Adaya. "Oil exports and the Nigerian economy : an econometric study." Thesis, Lancaster University, 1990. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.363262.
Повний текст джерелаLi, Zhendan. "An Ensemble Empirical Mode Decomposition Approach to Wear Particle Detection in Lubricating Oil Subject to Particle Overlap." Thèse, Université d'Ottawa / University of Ottawa, 2011. http://hdl.handle.net/10393/20313.
Повний текст джерелаCardoso, Priscilla Barreto. "Biobased polymeric nanoparticles from castor oil derivatives by admet and thiol-ene miniemulsion polymerizations." reponame:Repositório Institucional da UFSC, 2016. https://repositorio.ufsc.br/xmlui/handle/123456789/172593.
Повний текст джерелаMade available in DSpace on 2017-01-24T03:22:38Z (GMT). No. of bitstreams: 1 343621.pdf: 1896299 bytes, checksum: 65f598c0bc491124f31e49314d85e46e (MD5) Previous issue date: 2016
Abstract : Renewable resources are earning special attention as substitutes for petroleum-based compounds, considering the future shortage of fossil supplies and also due to a sense of environmental awareness. In this context, biobased polymers obtained from vegetable oils are considered a promising "green" alternative to fossil-derived polymeric materials and present potential biodegradability and low toxicity, allowing their application for high value added and/or biomedical purposes. Acyclic Diene Metathesis (ADMET) and thiol-ene reactions appear as successful and versatile techniques to obtain high molecular weight polymers from renewable raw materials, enhancing the possibilities for the synthesis of vegetable oil-based polymers via chemical modifications. Additionally, besides avoiding the use of organic solvents, working with an environmentally friendly system, miniemulsion polymerization enables the production of polymeric nanoparticles with unique characteristics and vast commercial interest, with the possibility of using and/or incorporating water-insoluble compounds for a wide range of applications. Herein, it is reported the synthesis and characterization of biobased polymeric nanoparticles using a 100% renewable a,?-diene-diester monomer obtained by esterification reaction of 10-undecenoic acid (derived from castor oil) with 1,3-propanediol (derived from glycerol, which is also derived from castor oil). ADMET and thiol-ene polymerization reactions were successfully performed in miniemulsion and yielded polymers with weight average molecular weight up to 15 kDa (Mn), depending on different parameters and type of reactants (comonomers, surfactants, catalysts) employed. Then, the poly(thioether-ester) nanoparticles were modified by the oxidation of their sulfur atom to sulfoxide and sulfone groups, aiming the development of nanoparticles with high potential for the encapsulation and release of bioactive compounds. Lastly, results revealed that the synthesized poly(thioether-ester) nanoparticles derived from renewable resources did not present any cytotoxic effect on murine fibroblast (L929) and human cervical cancer (HeLa) cells and showed high blood biocompatibility, assuring their viability for biomedical applications.
Recursos renováveis atraem crescente atenção como substitutos para matérias-primas derivadas do petróleo, considerando a futura escassez de fontes fósseis e também devido a um sentimento de consciência ambiental. Neste contexto, biopolímeros obtidos a partir de óleos vegetais são considerados uma promissora alternativa ecológica aos materiais poliméricos derivados de fontes fósseis, apresentando potencial biodegradabilidade e baixa toxicidade, permitindo sua aplicação para propósitos de alto valor agregado e/ou fins biomédicos. As reações de metátese de dienos acíclicos (ADMET) e tiol-eno aparecem como técnicas bem sucedidas e versáteis para a obtenção de polímeros de elevada massa molar derivados de matérias-primas renováveis, aumentando as possibilidades para a síntese de polímeros derivados de óleos vegetais a partir de modificações químicas. Além disso, a polimerização em miniemulsão é um sistema ambientalmente amigável, livre de solventes orgânicos e permite a produção de nanopartículas poliméricas com características únicas e de grande interesse comercial, com a possibilidade de utilização e/ou incorporação de compostos e compósitos insolúveis em água para uma vasta gama de aplicações, inclusive para fins biomédicos. A possibilidade da obtenção de polímeros em meio aquoso, cuja síntese tradicional é sensível à água, tais como poliésteres, é uma grande vantagem das reações de polimerização ADMET e tiol-eno em miniemulsão. Além disso, muitos outros tipos de materiais podem ser obtidos como, por exemplo, nanocompósitos, nanocápsulas e partículas híbridas. Como vantagem adicional, polímeros que contenham grupos éster na cadeia principal podem sofrer hidrólise, permitindo a sua degradação em ambiente fisiológico, fator de grande importância para aplicações biomédicas ou mesmo para a eliminação do material polimérico no meio ambiente. Dessa forma, o objetivo do presente trabalho foi a síntese e caracterização de nanopartículas poliméricas utilizando um monômero a,?-dieno-diéster 100% renovável, obtido através da reação de esterificação do ácido 10-undecenoico (derivado do óleo de mamona) com o 1,3-propanodiol (derivado do glicerol, que também é derivado do óleo de mamona). Reações de polimerização ADMET e tiol-eno em miniemulsão foram realizadas com sucesso e produziram polímeros com massa molar média de até 15 kDa (Mn), dependendo de diferentes parâmetros e do tipo de reagentes (comonômeros, surfactantes, catalisadores) utilizados. No estudo das reações ADMET, a grande área superficial da fase orgânica nas reações em miniemulsão provavelmente aumentou a remoção de etileno (subproduto) do meio reacional, favorecendo a reação ADMET e atingindo polímeros com massas molares maiores do que os polímeros obtidos por polimerização em massa. Através dos resultados obtidos, foi observado que o catalisador Umicore M2 e o surfactante não-iônico Lutensol AT80 formaram a combinação mais adequada para a realização de reações ADMET em miniemulsão. Quando reações tiol-eno foram realizadas em miniemulsão, três diferentes monômeros a,?-dienos (1,7-octadieno, 1,3-propileno dipenta-1-enoato e 1,3-propileno diundeca-10-enoato) e dois ditióis diferentes (1,4-butanoditiol e 2-mercaptoetil éter) foram testados e os resultados foram comparados. O iniciador AIBN apresentou uma concentração ideal (1 mol%) para a síntese de polímeros com massa molar mais elevada, diferente do comportamento esperado em polimerizações tradicionais via radicais livres. Em seguida, as nanopartículas de poli(tioéter-éster) obtidas foram modificadas através da oxidação do átomo de enxofre em grupos sulfóxido e sulfona, visando à obtenção de nanopartículas com elevado potencial para o encapsulamento e liberação de compostos bioativos. Análises de DLS (Espalhamento Dinâmico de Luz) e MET (Microscopia Eletrônica de Transmissão) asseguraram a estabilidade de tamanho/polidispersão e morfologia das nanopartículas mesmo após o processo de oxidação; análises de FTIR e TGA confirmaram a presença de grupos sulfóxido e sulfona após a oxidação. Por último, foram realizadas análises de biocompatibilidade das nanopartículas de poli(tioéter-éster) obtidas. Resultados revelaram que as nanopartículas de origem renovável não exibiram efeito citotóxico em células de fibroblasto murinho (L929) e câncer cervical humano (HeLa) e, além disso, apresentaram alta hemocompatibilidade, viabilizando futuras aplicações biomédicas como sistemas carreadores de fármacos.
Giannopoulou, Anna. "The economic development of the Greek olive-oil industry with special reference to Messenia Province." Thesis, University of Salford, 1990. http://usir.salford.ac.uk/14747/.
Повний текст джерелаStipaničev, Marko. "Improved decision support within biocorrosion management for Oil and Gas water injection systems." Phd thesis, Toulouse, INPT, 2013. http://oatao.univ-toulouse.fr/10304/1/stipanicev.pdf.
Повний текст джерелаMagalhães, Tasso Cordeiro Benevides de. "Influencia de restrições operacionais na definição das estrategias de produção." [s.n.], 2005. http://repositorio.unicamp.br/jspui/handle/REPOSIP/263696.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica e Instituto de Geociencias
Made available in DSpace on 2018-08-04T17:38:31Z (GMT). No. of bitstreams: 1 Magalhaes_TassoCordeiroBenevidesde_M.pdf: 3378169 bytes, checksum: 1fce57c554e09b19fe2b8796625d7f8b (MD5) Previous issue date: 2005
Resumo: Estratégias de produção para campos petrolíferos são escolhidas com o objetivo de obter o melhor desempenho possível dos reservatórios, considerando restrições físicas, operacionais e econômicas. Em vários trabalhos publicados sobre otimização das estratégias de produção considera-se apenas o reservatório, simplificando o processo de definição por não considerar as restrições operacionais das facilidades de produção. Entretanto, as restrições da unidade de processamento e dos equipamentos necessários para o escoamento do petróleo, não só influenciam a produtividade do reservatório e o retorno financeiro do empreendimento, como também podem causar impacto significativo na definição da estratégia de drenagem, influenciando a quantidade e localização de poços produtores e injetores e no gerenciamento das condições de operação. No presente trabalho, duas restrições operacionais são analisadas: a limitação da capacidade de tratamento de líquidos da unidade de produção e a quantidade gás no sistema de elevação, gas-lift. Foram otimizadas estratégias de produção com e sem tais restrições para alguns casos e várias diferenças puderam ser observadas nos valores de indicadores técnicos e financeiros, como valor presente líquido, produção e injeção de fluidos e a quantidade e posicionamento de poços produtores e injetores. Foi possível demonstrar a influência das restrições operacionais e que se as mesmas não forem incluídas no processo de otimização antes da definição da quantidade e posição dos poços, o desempenho do campo pode ser prejudicado
Abstract: Production strategies for petroleum fields are chosen with the objective of achieving the best possible performance of the reservoir, considering physical, operational and economical constraints. In many published papers regarding production strategy optimization, only the reservoir is considered, simplifying the analysis process by not considering the operational constraints of production facilities. However, the restrictions of a production unit and the necessary equipments to guarantee the flow of petroleum not only have influence on the reservoir production and on the enterprise profits, but can also cause significant impact on the definition of the drainage strategy, influencing the number and location of producer and injector wells and the operational conditions management. In this work, two operational constraints are analyzed: the limitation of the capacity for liquid treatment and the amount of available gas for gas-lift operation. Production strategies were optimized with and without these restrictions for some case-studies and many differences were noted in the value of technical and financial indicators, such as the net present value, the production and injection of fluids and the number and location of producer and injector wells. It was possible to demonstrate the influence of operational constraints and how their exclusion from the optimization process, before definition of the number and location of wells, can lead to a wrong assessment of the field performance
Mestrado
Reservatórios e Gestão
Mestre em Ciências e Engenharia de Petróleo
Alaswad, Alaa A. "DEVELOPMENT OF CHEMICALLY MUTAGENIZED SOYBEAN POPULATIONS FOR IMPROVING SOYBEAN SEED OIL CONTENT AND FORWARD AND REVERSE GENETICS SCREENING." OpenSIUC, 2014. https://opensiuc.lib.siu.edu/theses/1421.
Повний текст джерелаPonsin, Violaine. "Natural attenuation of crude oil in the La Crau aquifer." Thesis, Aix-Marseille, 2014. http://www.theses.fr/2014AIXM4738/document.
Повний текст джерелаOn August 7, 2009 a pipeline transporting crude oil broke in the heart of the Nature Reserve of Coussouls de Crau, and 5,100 m3 of oil were spilled over 5 hectares. Oil infiltrated through the subsurface and reached the most important regional aquifer where it formed a LNAPL that created a plume of dissolved compounds. Among these compounds, benzene is of particular concern because of its toxicity and high solubility. This thesis aims at showing that biodegradation of crude oil, especially of dissolved compounds, is a good option for long-term management of risks for the water resource. A first study in microcosms demonstrated biodegradation of targeted compounds, including benzene, even under the most reducing conditions. This study also revealed that the availability of electrons acceptors was a limiting factor and that phosphate was a powerful lever to stimulate bacterial growth. An on-site study proved the feasibility of biostimulation by nitrate and phosphate injection in the aquifer and showed that biostimulation was efficient to reduce concentrations of dissolved compounds. Naturally occurring radon was used as a tracer to estimate oil saturation in the saturated zone in a third study. The ease of implementation of this method and the results offer interesting perspectives to optimize the yield of pump-and-skim systems in LNAPL-contaminated sites. The last study focused on the implementation of redox processes and degradation in the saturated zone after the spill. This study showed that processes quickly evolved and that conditions were favorable to natural attenuation. In situ benzene degradation was proven by the measurements of stable isotopes of carbon
Alliod, Océane. "Development and valorization of a membrane emulsification process for the production of nanoemulsions." Thesis, Lyon, 2018. http://www.theses.fr/2018LYSE1264/document.
Повний текст джерелаNanoemulsions are interesting carriers for applications such as cosmetics, pharmaceutical and food. They are produced usually by low or high energy techniques. In this work, a process involving moderate pressure, premix membrane emulsification (PME) was proposed as an alternative. Oil-in-water (O/W) and water-in-oil (W/O) nanoemulsions were produced with a pilot scale set-up composed of a controlled high pressure syringe pump and Shirasu Porous Glass (SPG) membrane. First, the influence of process and composition parameters on droplet sizes and pressures was extensively studied with model compositions to optimize the production. Thus, nanoemulsions down to 260 nm for O/W and around 600 nm for W/O were successfully produced. Then, the set-up was used to produce nanoemulsions of specific compositions: O/W and W/O nanoemulsions stabilized with polypeptidic surfactants and O/W nanoemulsions suitable for injection. Finally, the set-up developed was compared to two traditional high energy processes, microfludizer and ultrasound in terms of droplet size and active preservation. No real difference between the three processes was seen on active preservation with the model active chosen. However, regarding droplet size, PME produced monodispersed droplets of 335 nm compared to the other processes which produced nanoemulsions of around 150 nm but with the presence of micron size droplets detected by laser diffraction and optical microscopy. Therefore, PME nanoemulsions are also suitable for parenterals applications with no additional filtration step required
Thiéry, Régis. "Les systèmes eau-gaz-sels : modélisation des équilibres de phases et application aux fluides géologiques." Vandoeuvre-les-Nancy, INPL, 1996. http://docnum.univ-lorraine.fr/public/INPL_T_1996_THIERY_R.pdf.
Повний текст джерелаAnderson, Joseph. "Carbon Affect on European Oil and Steel Companies: An Empirical Analysis on the Second Phase EU ETS." Scholarship @ Claremont, 2012. http://scholarship.claremont.edu/cmc_theses/460.
Повний текст джерелаKama, Kärg. "Unconventional futures : anticipation, materiality, and the market in oil shale development." Thesis, University of Oxford, 2013. http://ora.ox.ac.uk/objects/uuid:c08589c9-d82a-4c6e-926e-36202bf2060a.
Повний текст джерелаLignel, Sarah. "Emulsions eau-dans-huile générées par un procédé microfluidique : contribution à l'étude de la congélation de l'eau dispersée en émulsion." Thesis, Compiègne, 2014. http://www.theses.fr/2014COMP2143/document.
Повний текст джерелаThis thesis takes place in the framework of the European project FASES (Fundamentaland Applied Studies on Emulsion Stability). The aim of this project is to understand the phenomena responsible for emulsions destabilization, in relation with the interfacial properties of these systems. The research work described in this thesis is divided into twoparts : the first part deals with the creation of water-in-oil emulsion droplets in a microfluidic device, and in the second part, the influence of the size and the state of dispersion of the droplets on the crystallization of dispersed water is analyzed.To begin with, the operating conditions required to create emulsion droplets by microfluidic were studied. Two modes of introduction of the liquid phases, based on flow and pressure-driven techniques, were used to create the droplets. Maps of the droplet formation regions were drawn as a function of the applied flow rates and pressures. In order to compare the two processes, a model based on the analogy between electrical and microfluidic circuits was proposed.Then, emulsions obtained with the microfluidic device were analyzed by calorimetry and thermo-microscopy. The experimental results evidenced different droplet crystallization processes, depending on the system parameters (oil phase viscosity, droplet size …). The water freezing signals strongly depend on the state of dispersion of the droplets, showing themajor role of droplet sedimentation in the emulsion destabilization process
Flesinski, Lionel. "Étude de la stabilité des émulsions et de la rhéologie interfaciale des systèmes pétrole brut/eau : influence des asphaltènes et des acides naphténiques." Thesis, Pau, 2011. http://www.theses.fr/2011PAUU3022/document.
Повний текст джерелаWater-in-crude oil emulsions are a major issue for oil companies in both production and refining facilities. Thanks to physical and chemical characterizations, Total set a classification which allows the decision of a crude oil ability to create stable emulsions. However the interfacial mechanisms implied and the influence of the indigenous surfactants of crude oil remain unclear. Our work consists in studying the naphthenic acids and asphaltenes contribution to the w/o emulsion stability. The study of realistic crude oils enabled the discovery of a link between the emulsion stability with the formation of a very particular interfacial behavior: a two-imensional gel. Experiments with desacidified oils have proven the destabilizing ability of naphthenic acids and their ionized form, naphthenates. They actually decrease the interfacial gel strength and can even prevent the gel formation. Asphaltenes-free crude oils have permitted to confirm the stabilizing role of asphaltenes. Rather than adsorbing directly on the interface, asphaltenes seem to adsorb on the interfacial gel already formed. The gel strength is thus increased and lead to higher emulsion stability. Thanks to these results and the industrial classification of crude oil developed by Total, a global mechanism explaining the emulsion stability process has been proposed. This mechanism is governed by the competition between asphaltenes, naphthenates and naphthenic acids at the water/oil interface. If the concentration of naphthenic acids and naphthenates is high enough, the interfacial gel cannot be formed and the emulsions are unstable. If the crude oil is not acidic enough, the asphaltenes influence increases dramatically and implies the strengthening of the gel which becomes closer to his glass transition. This generally leads to the formation of more stable emulsions
Cambi, Rui Cesar. "Shale Gas & Oil : a nova dinâmica energética mundial e as perspectivas para o Brasil." reponame:Repositório Institucional da UFABC, 2017.
Знайти повний текст джерелаDissertação (mestrado) - Universidade Federal do ABC. Programa de Pós-Graduação em Energia, 2017.
A premente necessidade de energia é cada vez mais atual na sociedade contemporânea. O seu uso está correlacionado aos costumes, estágio de desenvolvimento e ao grau de industrialização do país. A busca por novos recursos energéticos é questão primordial para o bem-estar das pessoas e para a expansão econômica dos países. A descoberta de importantes recursos energéticos, denominados hidrocarbonetos não convencionais tais como: óleo pesado e ultrapesado, areias betuminosas, óleo encontrado em águas profundas e ultraprofundas como o pré-sal e o shale gas & oil que está disseminado de forma homogênea pelo mundo todo, vem chamando a atenção de vários países. Os EUA, um dos maiores importadores de petróleo e gás do mundo, são portadores de vastas reservas de shale gas & oil e possuem conhecimento geológico e tecnologia adequada. Isso tornou o país o precursor da exploração desse energético no mundo. A produção dos Estados Unidos vem crescendo significativamente, reduzindo sua dependência de petróleo e gás importado, provocando abundância no mercado global, o que resulta em queda de preço do petróleo e gás, alterando a geopolítica da energia mundial. O Brasil, no contexto mundial, possui reservas expressivas de não convencionais, sendo a 10ª maior reserva do mundo. É crescente a necessidade de energia pela sociedade brasileira e o país vem demonstrando interesse em explorar esses energéticos. Esta dissertação tem como objetivo analisar as perspectivas mundiais de exploração desses hidrocarbonetos não convencionais à luz da experiência dos EUA, analisando o panorama brasileiro para futuras explorações. Este estudo mostrou como resultado que o Brasil terá dificuldades de replicar a exploração do shale gas & oil, como ocorreu nos EUA.
The pressing need for energy is increasingly present in contemporary society. Energy consumption is correlated with their customs, the stage of development and the degree of industrialization of the country. The search for new energy resources is a key issue for people's well-being and for the economic expansion of countries. The discovery of important energy resources, called unconventional hydrocarbons shale gas & oil, spread democratically around the world, has drawn the attention of several countries. The US, one of the largest importers of oil and gas in the world, carry vast reserves of shale gas & oil and has geological knowledge and appropriate technology. This made the country the precursor of the exploitation of this energy in the world. US production has been growing significantly, reducing its dependence on imported oil and gas, sparking global market abundance, resulting in falling oil and gas prices, shifting global energy geopolitics. Brazil in the world context has significant reserves, being the 10th largest reserve in the world. There is a growing need for energy by Brazilian society. The country has been showing interest in exploiting these energy sources. The objective of this dissertation is to analyze the global prospects for exploration of these unconventional hydrocarbons in the light of the US experience, to evaluate possible interferences in the geopolitics of energy at global level, ascertaining socioeconomic and environmental issues, knowledge to support future development studies on Brazilian soil.
TOZZO, Everton. "A hybrid multi-objective genetic algorithm for scheduling heterogeneous workover rigs on onshore oil fields." Universidade Federal de Pernambuco, 2017. https://repositorio.ufpe.br/handle/123456789/23757.
Повний текст джерелаMade available in DSpace on 2018-02-20T18:02:59Z (GMT). No. of bitstreams: 2 license_rdf: 811 bytes, checksum: e39d27027a6cc9cb039ad269a5db8e34 (MD5) Dissertacao TIAGO FRANCA BARRETO versao final revisada com ficha.pdf: 1881406 bytes, checksum: 12e01eebda9019e211cef41ad935a421 (MD5) Previous issue date: 2017-02-16
CNPQ
Campos de produção de petróleo terrestres são compostos por um conjunto de poços de petróleo que, depois de certo tempo em operação, podem apresentar algum tipo de mau funcionamento e ter a produção interrompida. Quando isso ocorre, veículos especialmente equipados, também chamados sondas de manutenção, são utilizados para prestação de serviço nos poços e garantir que suas atividades sejam reestabelecidas. Dado um número limitado de sondas de manutenção e a grande quantidade de poços existentes no campo de petróleo, o problema das sondas de manutenção consiste em encontrar o melhor escalonamento para as mesmas de modo que a perda de produção total dos poços seja minimizada. O escalonamento dos poços considera alguns fatores como a taxa de perda de produção por poço, o nível de atendimento requerido e o horizonte de planejamento para o qual o escalonamento será executado. Este trabalho apresenta um algoritmo genético híbrido para a resolução do problema de sondas de manutenção com múltiplos objetivos, frota heterogênea e horizonte de planejamento finito. O algoritmo genético híbrido incorpora uma heurística de descida em vizinhança variável como método de busca local para aumentar a velocidade de convergência do conjunto de soluções. São considerados os objetivos de minimização da perda de produção e custo com frota associado ao aluguel das sondas de manutenção. A frota é mantida variável, portanto um depósito de sondas é incluído em uma posição estratégica no campo de produção de petróleo para garantir que as novas sondas de manutenção, além das já espalhadas no campo, possam ser incluídas no escalonamento quando requeridas. O algoritmo genético foi testado em um conjunto de instâncias com até 200 poços, 10 sondas de manutenção e horizonte de planejamento igual a 300. Os resultados demonstram um alto conflito entre os objetivos de minimização da perda de produção e o custo da frota para o problema das sondas de manutenção, além de importantes aspectos relacionados às soluções obtidas pelo algoritmo proposto aplicado ao problema.
Onshore oil fields are composed by a set of geographically distributed wells that, after some time of operation, might present some malfunction and have their production interrupted. When the oil production of some wells is interrupted, specially-equipped vehicles, also called workover rigs, are deployed to service the wells and guarantee that their activity is restored. Given the limited number of workover rigs and the large number of wells around the oil field, the workover rig problem consists in finding the best scheduling for the workover rigs so the total production loss of wells is minimized. The scheduling considers some factors such as the production loss rate of each well, the service level required and the planning time horizon in which the scheduling must be executed. This research presents a hybrid genetic algorithm to solve the multi-objective workover rig problem with a heterogeneous fleet and a finite time horizon. The hybrid genetic algorithm incorporates a variable neighborhood descent heuristic as a local search procedure to increase the convergence speed of the set of solutions. Both objectives of minimization of the production loss and fleet cost associated to the rent of workover rigs are taken in consideration. The fleet is held variable, so a workover rig depot is included at a strategic position on the oil field in order to guarantee that new workover rigs, besides the already existent ones on the oil field, might be included in the scheduling when required. The genetic algorithm was tested on a set of practical-sized instances up to 200 wells, 10 workover rigs and 300 period horizon. Results show a high conflict between the objectives of minimizing the production loss and fleet cost for the workover rig problem, besides important aspects of the solutions obtained by the proposed algorithm to solve the problem.
Bernat, Jakub. "Energetické vztahy mezi EU a Ruskou federací na pozadí zájmů středoevropských zemí." Master's thesis, Vysoká škola ekonomická v Praze, 2010. http://www.nusl.cz/ntk/nusl-71780.
Повний текст джерелаAgibert, Sílvia Ainara Cardoso. "Adição de óleo de amendoim alto oleico encapsulado em chocolate amargo." Universidade de São Paulo, 2018. http://www.teses.usp.br/teses/disponiveis/9/9133/tde-11092018-164136/.
Повний текст джерелаThe increasing of cardiovascular diseases in the world is promoting the interest for science development in healthier foods to the consumer market, which has become a major trend in the food industry. The aim of this study was to add microcapsules of high oleic peanut oil in dark chocolate 57%, a healthy and indulgent food. The nutritional value of the high oleic peanut oil is associated with the presence of oleic acid, a monounsaturated fatty acid considered fundamental for its beneficial properties in reducing oxidation of LDL-cholesterol. The work was divided into two stages: production and characterization of microcapsules of high oleic peanut oil; formulation, production and characterization of dark chocolate with microcapsules of high oleic peanut oil added (5%, 7.5% and 10%) evaluating its stability during 112 days of shelf life, with a view to a product with nutritional and technological quality. The emulsion prepared to produce microcapsules in laboratory scale spray dryer showed kinetic stability at 18°C, pH of 4.82 ± 0.07, total soluble solids content of 14.7 ± 0.1 °Brix, 0.983 ± 0.010 of water activity, pseudoplastic behavior adjusted to the model of Binghan and high thixotropy, being suitable for the intended process. The microencapsulation process showed 65% yield in laboratory scale. As obtained by other authors, the high oleic peanut oil microcapsules were: 3.32% ± 0.03% moisture, 0.244 ± 0.012 water activity, 0.50 ± 0.02 g·mL-1 bulk density, and morphology of the amorphous and typical surface of the microcapsules produced by spray drying with gum arabic as the encapsulating agent, which indicates the formation of a continuous film that provides less permeability to gases and improved protection and retention of the filling, indicating highly successful process. The dark chocolate with 5% of microcapsules added was considered the most suitable among the evaluated formulations, since it presented lower moisture content (1.37% ± 0.2%) and higher lipid content (33.95% ± 1.48%) and oleic acid (33.861% ± 0.014%), in this lipid fraction, than the other treatments, besides having rheological and calorimetric properties compatible to the control formulation, with pseudoplastic behavior better adjusted to the Casson model (R²> 0.98) and stability over the shelf life. The relevant technological information obtained proved the technological feasibility for the production and commercialization of a food product of nutritional importance.
Fryščok, Tomáš. "Dynamika rotorů moderních turbodmychadel." Doctoral thesis, Vysoké učení technické v Brně. Fakulta strojního inženýrství, 2013. http://www.nusl.cz/ntk/nusl-234168.
Повний текст джерелаVojnová, Katarína. "Vývoj energetickej politiky EU v oblasti ropy a zemného plynu s ohľadom na ekonomickú a geopolitickú situáciu na Ukrajine." Master's thesis, Vysoká škola ekonomická v Praze, 2014. http://www.nusl.cz/ntk/nusl-193505.
Повний текст джерелаJada, Amane. "Etude de la structure et de la dynamique de microemulsions eau dans huile." Université Louis Pasteur (Strasbourg) (1971-2008), 1988. http://www.theses.fr/1988STR13101.
Повний текст джерелаSiew, Wei-Hun. "Financial evaluation techniques used to value risk and appraise projects in the oil industry : a comparative analysis of traditional and modern approaches." Thesis, University of Dundee, 2001. http://ethos.bl.uk/OrderDetails.do?uin=uk.bl.ethos.250919.
Повний текст джерелаRaisin, Jonathan. "Détermination d'un critère prédisant l'efficacité du procédé d'électrocoalescance sur la destabilisation d'émulsions eau-pétrole brut." Phd thesis, Université de Grenoble, 2011. http://tel.archives-ouvertes.fr/tel-00684414.
Повний текст джерелаFigueiredo, Andrea Cátia Ferreira de. "A responsabilidade social no sector petrolífero: o caso da BP e da Chevron." Master's thesis, [s.n.], 2012. http://hdl.handle.net/10284/3342.
Повний текст джерелаCresce cada vez mais a consciência de que é necessário posicionar-se proactivamente na sociedade, se o que se deseja é um desenvolvimento social sustentado. Esta consciencialização do consumidor por produtos e práticas que geram melhoria para a sociedade, leva muitas empresas a adotar estratégias de responsabilidade social (RS). E esta consciencialização não se restringe ao espaço em que as empresas estão sedeadas. Embora a RS seja ainda um tema pouco desenvolvido nos países em desenvolvimento, os consumidores a nível mundial têm-se mostrado atentos ao comportamento das empresas nestes países. A título de exemplo cita-se a Shell que após acontecimentos negativos que envolveram a empresa num país em desenvolvimento (Nigéria) sofreu múltiplos boicotes que se materializaram na queda das vendas. Neste sentido, procura-se nesta dissertação fazer um pequeno enquadramento sobre a responsabilidade social corporativa (RSC); para isso abordaram-se alguns trabalhos recentes no intuito de apresentar uma base teórica consistente. A metodologia adotada é a qualitativa, através de um design de pesquisa descritiva, mas especificamente o estudo de casos. Para o estudo foram analisadas as estratégias de atuação de duas petrolíferas, BP e a Chevron, no sentido de verificar como as petrolíferas multinacionais inseridas nos países em desenvolvimento têm promovido nestes países o seu compromisso com a RSC. Embora sem comprovação estatística, os resultados apurados neste trabalho revelam que as petrolíferas multinacionais envolvidas em países em desenvolvimento têm promovido nestes países o conceito de RSC através de programas de RSC sustentáveis, não se limitando apenas ao que é exigido por lei, e não se deixando influenciar pela cultura e práticas de negócio locais (ainda pouco evoluídas neste sentido), indo assim ao encontro do senso comum presente em países desenvolvidos. There’s a growing awareness that it is necessary to position proactively in society, if what you want is a sustained social development. This consumer awareness of products and practices that generate improvement to society leads many companies to adopt strategies for social responsibility (SR). And this awareness is not limited in space where companies are headquartered. Although the RS is still a quite underdeveloped theme in developing countries, consumers worldwide have shown alert to the behavior of companies in these countries. For example, as quote, the company Shell, that after negative events involving the company in a developing country (Nigeria) suffered multiple boycotts that materialized in sales drop. In this sense, this thesis seeks to make a small framework on corporate social responsibility; for that, it was approached some recent work in order to present a consistent theoretical basis. The adopted methodology is qualitative, through a descriptive research design, but specifically the case study. For this study, it was analyzed the action strategies of two oil companies, BP and Chevron, to check how the multinational oil companies inserted in developing countries have promoted in these countries their commitment to CSR. Although with no statistical proof, the results obtained in this study reveal that the multinational oil companies involved in developing countries have promoted in these countries the concept of RSC through sustainable CSR programs, not limited only to the extent required by law, and not being influenced by culture and local business practices (still poorly evolved in this sense), thus meeting the common sense in developed countries.
Oliveira, Rafael Cajano de. "Sistema de gestão ambiental na indústria do petróleo : estudo sobre as práticas de gestão na Refinaria Presidente Bernardes (RPBC)." reponame:Repositório Institucional da UFABC, 2016.
Знайти повний текст джерелаDissertação (mestrado) - Universidade Federal do ABC. Programa de Pós-Graduação em Energia, 2016.
O presente trabalho trata de uma pesquisa exploratória realizada na Refinaria Presidente Bernardes, localizada em Cubatão. Analisa a temática ambiental frente a norma ISO 14001 com viés voltado à aprendizagem organizacional, investigando as práticas de gestão ambiental realizadas no contexto da norma ISO 14001. O trabalho se pauta no método quantitativo, combinando os tipos exploratório e descritivo, utilizando questionários e tendo como sujeitos da pesquisa funcionários próprios e contratados da empresa. Frente com a teoria estudada percebe-se nos resultados da pesquisa, que o sistema de gestão ambiental ISO 14001 consolidado na refinaria favorece a aprendizagem organizacional na corporação. Verifica-se que a refinaria utiliza informações externas na tomada de decisão sobre problemas ambientais, que os funcionários são mobilizados para gerar ideias e coletar informações ambientais. Evidencia-se que os elementos supracitados podem contribuir para geração de conhecimento dentro da refinaria, demonstrando que esta tem uma boa difusão de conhecimento, fatos estes que corroboram para melhores práticas ambientais.
The present work is an exploratory research at the Presidente Bernardes Refinery, located in Cubatão. Analyzing the environmental issues facing the ISO 14001 biased oriented organizational learning, investigating the environmental management practices, carried out in the context of ISO 14001 implemented in the research organization. The work is guided in quantitative method, combining the exploratory and descriptive type, using questionnaires and as research subjects own employees and contractors of the company. Forward with the theory studied notice on the results of the research, the environmental management system ISO 14001 consolidated in refinery promotes organizational learning in the corporation. Thus, after the research it is found that the refinery uses external information in decision-making on environmental issues, employees are mobilized to generate ideas and gather environmental information. Showing that the above elements can contribute to knowledge generation within the refinery, demonstrating that it has a good spread of knowledge, facts that corroborate these to best environmental practices.
Klug, Andrise Buchweitz. "Evaluation of the fatigue performance of fine aggregate matrices prepared with reclaimed asphalt pavements and shale oil residue." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/18/18143/tde-19022018-112755/.
Повний текст джерелаA incorporação de misturas asfálticas fresadas na produção de misturas asfálticas novas é uma alternativa útil à utilização de materiais novos, gerando benefícios econômicos e ambientais. A reciclagem de pavimentos criou um ciclo sustentável de reuso de recursos naturais não-renováveis, reduzindo a demanda por agregado mineral e asfalto novos. No entanto, a adição do material fresado, especialmente em proporções altas, provoca aumento na rigidez da mistura asfáltica, causado pela alta rigidez do asfalto envelhecido. Uma elevada rigidez pode tornar a mistura asfáltica mais propensa ao trincamento por fadiga. Para contornar tal desvantagem e permitir a adição de maiores quantidades de material fresado, asfaltos de baixa consistência e agentes de rejuvenescimento podem ser adicionados à mistura. Os asfaltos de baixa consistência atuam para reduzir a rigidez do asfalto envelhecido e os agentes de rejuvenescimento atuam para restaurar as propriedades originais do asfalto envelhecido, aproximando-as das exigidas pelas especificações para asfaltos virgens. O resíduo de óleo de xisto é um dos agentes rejuvenescedores mais utilizados no Brasil e, segundo a literatura, resulta em desempenho comparável ao desempenho de outros agentes rejuvenescedores comerciais, com a vantagem de apresentar maior poder de rejuvenescimento devido à sua maior aromaticidade. O processo de trincamento por fadiga principia nas microtrincas presentes na matriz de agregado fino (MAF) da mistura asfáltica. Uma abordagem para avaliar o comportamento à fadiga das misturas asfálticas é baseada na teoria do dano contínuo em meio viscoelástico, pela qual o processo de trincamento do material é representado por variáveis de estado interno associadas à redução na integridade do material. Neste estudo, ensaios em amostras de MAF foram feitos para caracterizar o desempenho à fadiga, e os dados foram analisados utilizando a teoria do dano contínuo em meio viscoelástico. O objetivo da pesquisa foi avaliar o desempenho à fadiga de MAFs produzidas com três proporções de material fresado (20, 40 e 100%), dois asfaltos com diferentes graus de desempenho (PG 64-22 e PG 58-16), e três combinações (100/0, 50/50, 0/100) de asfalto PG 64-22 e agente de rejuvenescimento (resíduo de óleo de xisto). Dentre as MAFs preparadas com material fresado, duas apresentaram desempenho à fadiga superior à mistura de controle (composta apenas com materiais novos): a MAF composta com 40% de material fresado e PG 64-22 e a MAF composta com 20% de material fresado e PG 58-16. O resíduo de óleo de xisto não atuou como rejuvenescedor do asfalto envelhecido, para a maioria dos casos avaliados, provavelmente devido à baixa taxa de difusão do material no asfalto envelhecido.
Lupe, Fernanda Avila. "Estudo da composição quimica de oleos essenciais de plantas aromaticas da Amazonia." [s.n.], 2007. http://repositorio.unicamp.br/jspui/handle/REPOSIP/248371.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Instituto de Quimica
Made available in DSpace on 2018-08-10T11:52:46Z (GMT). No. of bitstreams: 1 Lupe_FernandaAvila_M.pdf: 1167669 bytes, checksum: 16d83b8cd46e624a76028cf31d1de6f3 (MD5) Previous issue date: 2007
Resumo: O presente trabalho envolveu o estudo da composição química dos óleos essenciais de cinco plantas aromáticas Aeollanthus suaveolens, Aniba canelilla, Aniba rosaeodora, Lippia alba e Ocimum basilicum por Cromatografia Gasosa acoplada a Espectrometria de Massas (CG-EM). Amostras destas plantas - óleo essencial, planta fresca, seca e resíduo da extração do óleo essencial - foram extraídas por Microextração em Fase Sólida em Espaço confinado (HS-SPME) e analisadas por CG-EM. Os óleos foram extraídos por arraste a vapor. Os óleos essenciais ricos em linalol de A. rosaeodora (madeira e folhas), L. alba e O. basilicum foram avaliados por CG-EM com coluna HP-5 e a composição dos enantiômeros de linalol determinada usando coluna quiral. Com o resultado dessa comparação, foi avaliada a substituição do óleo essencial da madeira de A. rosaeodora pelos óleos essenciais estudados. Um estudo sazonal de L. alba para definir as concentrações e quiralidade do linalol encontrado foi feito com seis coletas. As principais moléculas dos óleos essenciais e/ou extratos de A. canelilla (1-nitro-2-feniletano e metileugenol) e A. suaveolens (massoia lactona) foram isoladas utilizando técnicas de fracionamento como: destilação, hidrodestilação, extração ácido-base, cromatografia em coluna e cromatografia em camada delgada preparativa, e identificadas por RMN de H e C. A semi-síntese da massoia lactona foi feita a partir de uma molécula comercial (d-decalactona). Ensaios biológicos - antifúngico e anti bacteriano - foram realizados pela técnica de difusão com discos com amostras de A. canelilla e A. suaveolens
Abstract: This work involved the chemical composition study of the following five aromatics plants Aeollanthus suaveolens, Aniba canelilla, Aniba rosaeodora, Lippia alba and Ocimum basilicum using Gas Chromatography / Mass Spectrometry (GC-MS). Samples of these plants - essential oils, fresh and dried plants as well as extraction residues - were extracted using Headspace Solid Phase Microextraction (HS-SPME) and analyzed with GC-MS. The oils were extracted by steam distillation. The essential oils of A. rosaeodora (wood and leaves), L. alba and O. basilicum rich in linalool were evaluated by GC-MS using HP-5 column, while the linalool enantiomer composition using a chiral column. From the results of this comparison the replacement of A. rosaeodora essential oil from its wood by the plants listed above was evaluated. A seasonal study of L. alba to define linalool concentrations and chirality was made using six different samples. The main molecules of the essential oils and/or extracts of A. canelilla (1-nitro-2-phenyethane and methyl eugenol) and A. suaveolens (massoia lactone) were isolated using separation techniques as distillation, hydrodistillation, acid-base extraction, column chromatography and preparative thin layer chromatography, and identified by NMR H and C. The semi-synthesis of the massoia lactone was obtained from a commercial molecule (d-decalactone). Biological assays - anti-fungal and antibacterial - with samples of A. canelilla and A. suaveolens were conducted using the diffusion technique in discs
Mestrado
Quimica Organica
Mestre em Química
Martin, Alexis. "Modélisation de saumures carbonatées et caractérisation hydrogéologique de la mine Niobec, Saint-Honore, Québec : /." Thèse, Chicoutimi : Université du Québec à Chicoutimi, 1993. http://theses.uqac.ca.
Повний текст джерелаBezrodná, Ksenija. "EU a Rusko: vzájemné vztahy v oblasti energetiky." Master's thesis, Vysoká škola ekonomická v Praze, 2009. http://www.nusl.cz/ntk/nusl-71834.
Повний текст джерелаRodrigues, Pedro Henrique Silva. "Estudo de derramamento de óleo utilizando o programa MOHID." reponame:Repositório Institucional da UFABC, 2016.
Знайти повний текст джерелаDissertação (mestrado) - Universidade Federal do ABC. Programa de Pós-Graduação em Energia, 2016.
As crescentes preocupações socioambientais têm incentivado discussões acerca de alternativas que aliem um incremento da participação de fontes renováveis na matriz energética e a redução dos impactos ambientais negativos decorrentes da atividade humana. Nesse sentido, o correto manejo e destinação dos resíduos sólidos urbanos ocupa uma posição importante, pois tratamentos adequados para esses resíduos podem contribuir em ambas as frentes. Uma solução que tem sido largamente utilizada por países desenvolvidos e em desenvolvimento para a destinação dos resíduos sólidos é a sua recuperação energética por processo de conversão termoquímica de incineração. Essa solução tanto contribui para o aumento da oferta de energia, quanto diminui consideravelmente o volume dos resíduos a serem depositados em aterros, e ainda mitiga sua toxicidade. Como parte de um adequado planejamento, implantação e operação de uma planta de conversão energética de resíduos é imprescindível que se conheça seu poder calorífico, e muitos modelos têm sido desenvolvidos, principalmente com a utilização de regressão linear múltipla, técnica matemática que gera modelos de previsão lineares. Este trabalho teve o objetivo de propor uma metodologia de construção de modelos de predição de poder calorífico de resíduos sólidos urbanos, a partir da análise elementar, porém com uma abordagem computacional, utilizando uma técnica de inteligência computacional denominada redes neurais artificiais. Redes neurais podem representar tanto funções lineares quanto funções não lineares, e é através dessa característica que se pretendeu promover um incremento na acurácia das predições de poder calorífico de resíduos. Para tanto, foram testadas 432 configurações distintas de redes neurais, com a variação de 5 parâmetros de arquitetura da rede. Como resultado do trabalho, foi observado que, dentre essas 432 configurações, 80 (18,5%) obtiveram um índice de previsão considerado excelente, e a rede de melhor desempenho (rna-771-bfg-lp) atingiu um índice de erro médio percentual absoluto de 2,9%, na previsão de poder calorífico de 10 amostras. No comparativo com modelos matemáticos da literatura, a rna-771-bfg-lp foi melhor do que todos os modelos considerados, cujo melhor resultado foi 3,9% pelo índice MAPE. Esses resultados indicam que redes neurais se constituem uma técnica de construção de modelos de predição bastante promissora, e que a metodologia aqui proposta é capaz de gerar modelos de predição de poder calorífico de resíduos baseado em redes neurais bastante eficazes para esse tipo de tarefa.
In Brazil, the focus on offshore oil spills accidents is increasing its importance, given the increase in oil production in the country, as in the pre salt fields, which proportionally will increase the risk of accidents. The main consequences of an oil spill are financial losses to the local economy, as well as to the exploitation company, and mainly the serious environmental consequences. Due to the serious impacts of oil spills accidents, not only monitoring, and acting in real time are needed to reduce the impacts of the spread of the oil on the sea surface. Also the simulation of the spatial and time behavior of the oil on the sea surface are important tools on predicting the environmental impacts and evaluation in order to evaluate the influence areas. In addition, it is needed to the Brazilian Environmental Impact Report (RIMA) based on CONAMA's nº01 1986 resolution. The main purpose of this work was to implement an internationally consolidated methodology to model oil spill accidents using the MOHID CFD code. In order to validate the methodology, the MOHID code was used to simulate real and hypothetical accidents in the terminal waterway of São Sebastião city and Santos¿ estuary by using a two-dimensional hydrodynamic transport model and a Lagrangian approach using MOHID code. The hydrodynamic fields were validated by real tide data and the results show how the wind direction is significant to the oil stain¿s trajectory. Therefore, from the results obtained, which agree with the real accident simulated, we concluded that MOHID is an useful tool for future modeling of oil spill accidents and used for future works at UFABC.
Giglioti, Roberta. "Utilização da dosimetria opticamente estimulada (OSL) na avaliação de parâmetros de qualidade de feixe em radioterapia." Universidade de São Paulo, 2010. http://www.teses.usp.br/teses/disponiveis/59/59135/tde-13072010-105537/.
Повний текст джерелаBeam´s quality control is fundamental to ensure minimum operation requirements to radiotherapy services, since parameters evaluation, such as symmetry, planura, shade, filter factors and tray, amongst other ones, is necessary to guarantee stability to radiotherapy treatments, which minimize errors at dose delivery. The evaluation of those parameters in radiotherapy is normally executed through ionization compartments, radiographic films or semiconductor detectors, specifically diode and MOSFETs. Through the last years, the utilization of optically stimulated dosimetry at external individual dosimetry increased in several Europe countries, USA and Latin America countries, such as Mexico and Peru, which made it possible to apply OSL detectors at dosimetry to radiotherapy as well, in order to evaluate clusters parameters of quality. The OSL technique incorporate technical characteristics, found in films and TLD, to new proprieties, which were not available at preceding technologies, such as: possibility of dosimetry rereading, dose integration with intermediary doses evaluation between exposure at the same dosimeter and simplicity at the reading process. Recently, Launder Inc launched in the American market OSL dosimetric ribbons to dose profile analysis in computed tomography (TC). In this paper, it was analyzed this OSL tape shaped detector utilization, in order to determine parameters of quality in radiotherapy, such as symmetry and beam flatness, filter factors and tray, depth dose percentage and dose and shade. The results allowed to conclude that the studied detector is effective to determine parameters of quality. However, analysis methodology, as well as the used setup at initial irradiation, must be reformulated in order to get more accurate results, which it will allow to validate this method utilization at daily work routine in radiotherapy.
Marques, João Bosco Dias 1963. "Metodologia de avaliação econômica de projetos de petróleo com emprego de cópulas e processos estocásticos autorregressivos." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265801.
Повний текст джерелаTese (doutorado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica e Instituto de Geociências
Made available in DSpace on 2018-08-27T14:50:44Z (GMT). No. of bitstreams: 1 Marques_JoaoBoscoDias_D.pdf: 8432350 bytes, checksum: 10f225750a03d8f222ff06c7a20cc1e7 (MD5) Previous issue date: 2015
Resumo: Esta tese, de caráter metodológico, é uma proposta de análise econômica de projetos de petróleo com emprego de cópulas e processos estocásticos autorregressivos envolvendo cinco variáveis fundamentais: o preço da commodity, a taxa mínima de atratividade (TMA), o custo de investimento (CAPEX), o custo operacional (OPEX) e a curva de produção de óleo. A premissa é a existência de uma estratégia de produção já estabelecida, de preferência decorrente de metodologias validadas em simulação numérica de reservatórios. O fluxo de caixa do projeto é baseado numa formulação simplificada de VPL e num modelo analítico de produção condicionado à referida estratégia. Para a aplicação desta metodologia são estimados modelos da família GARCH e ARMA para o preço do óleo e TMA, cópulas Arquimedianas para o CAPEX e o OPEX e cópulas elípticas para as variáveis que compõem a curva analítica de produção. Uma solução computacional, desenvolvida para a validação desta tese, possibilita não só a estimativa dos modelos como a incorporação destes no fluxo de caixa de um projeto de petróleo, tanto em regime de concessão como de partilha de produção. A matriz de incertezas combina os atributos preço e taxa para três cenários econômicos, contra os atributos de eficiência e eficácia para três níveis de desempenho da empresa. A métrica de risco indicada é o valor em risco ponderado. Os resultados evidenciam as vantagens dos modelos estimados para a análise de risco de projetos de petróleo em condições de incertezas. As assimetrias relacionadas aos choques havidos no preço da commodity são claramente evidenciadas. A métrica indicada, além de coerente para um investidor avesso ao risco, pode subsidiar com vantagens a curva de risco na estimativa das reservas P10, P50 e P90. Outra vantagem é o tratamento acoplado de variáveis como o CAPEX e o OPEX como parâmetros de atributos de desempenho operacional. Trata-se de uma metodologia expedita, aplicável, de fácil interpretação e de valor prático, que pode auxiliar os processos de decisão em projetos de alta complexidade como os do pré-sal brasileiro
Abstract: This thesis of methodological nature is a proposed economic analysis of oil projects with the use of copulas and autoregressive stochastic processes involving five fundamental variables: the price of the commodity, the discount rate (TMA), the investment cost (CAPEX), the operating cost (OPEX) and the curve of oil production. The premise is the existence of a production strategy established, preferably derived from validated methods in numerical reservoir simulation. Cash flow of the project is based on a simplified formulation of NPV and an analytical model of production conditioned on the Strategy. For the application of this methodology, models from the ARMA and GARCH family were estimated for the price of oil and TMA, Archimedean copulas for the CAPEX and OPEX, and elliptical copulas for the variables that comprise the analytical production curve. A computational solution, developed to validate this thesis, provides not only the estimation of models, such as the incorporation in the cash flow of an oil project under concession regime and production sharing contract. The uncertainty matrix combines the attributes of price and rate in three economic scenarios versus the attributes of efficiency and effectiveness in three levels of operator performance. The indicated risk metric is the weighted value-at-risk. The results show advantages of the estimated models for the risk analysis of oil projects under conditions of uncertainty. Asymmetries related to shocks that were in the price of commodity are clearly evidenced. The indicated metric, in addition to its consistency for a risk averse investor, can subsidize with advantages the risk curve in the estimation of reserves P10, P50 and P90. Another advantage is the coupled treatment of variables like the CAPEX and OPEX as parameters of management attributes. This is an expedient methodology, applicable, easy to understand and of practical value that can aist decision-making processes in highly complex projects such as Brazilian pre-salt
Doutorado
Reservatórios e Gestão
Doutor em Ciências e Engenharia de Petróleo
Bonnet, Marie. "Libération contrôlée du magnésium par des émulsions doubles : impact des paramètres de formulation." Thesis, Bordeaux 1, 2008. http://www.theses.fr/2008BOR13669/document.
Повний текст джерелаDouble water-in-oil-in-water (W/O/W) emulsions are systems in which fat globules are dispersed in an aqueous continuous phase. They provide a compartmented structure that allows the encapsulation of hydrosoluble compounds in the internal aqueous droplets. Nevertheless, the application of multiple emulsions is limited by their thermodynamical instability and the possible diffusion of hydrosoluble matter from one aqueous phase to the other one through the oil layer. In this context, the influence of several formulation parameters (oil nature, hydrophilic emulsifier concentration, oil globule mass fraction, complexation of the encapsulated species) was investigated relatively to magnesium release. All the ingredients used were food grade to match pharmaceutical and food application requirements. Magnesium leakage occurred without film rupturing. A model based on diffusion was proposed in which the rate of release was determined by the permeation coefficient of magnesium across the oil phase, by magnesium chelation and by the osmotic pressure mismatch between the internal and external aqueous phases. The permeation coefficient depended on the chelating agent location and concentration but was poorly influenced by the osmotic pressure. Moreover, the permeation coefficient evolved with time, especially at high oil globule fractions
Casari, Matheus Puttinati 1989. "Uso da espectroscopia por impedância para a medição da fração volumétrica de água em emulsões de água e óleo : The use of impedance spectroscopy for the water concentration measurement in water and oil emulsions." [s.n.], 2014. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265959.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecânica
Made available in DSpace on 2018-08-24T20:16:15Z (GMT). No. of bitstreams: 1 Casari_MatheusPuttinati_M.pdf: 7346334 bytes, checksum: 21f16ea44e6fdefa2b0445fe1a0b6b3a (MD5) Previous issue date: 2014
Resumo: A concentração volumétrica de água na produção de óleo cru é um parâmetro constantemente monitorado para acompanhar as sempre inconstantes propriedades do reservatório assim com para razões de otimização; resumindo, o que é importante é o volume de óleo na produção. A medição da concentração volumétrica de água é geralmente feita em bancada (colhendo uma amostra da produção e analisando-a em um laboratório) ou por sensores que monitoram a concentração em tempo real. Uma das técnicas utilizadas para a medição online da concentração de água é a espectroscopia por impedância. De fato, propriedades dielétricas e condutivas formam a impedância elétrica da solução. Na presente análise foram considerados os dois tipos básicos de emulsão: água em óleo (A/O) e óleo em água (O/A). O objetivo deste trabalho foi comparar a concentração de água medida com a predição do modelo matemático baseado nas medições das propriedades dielétricas e condutivas da solução. As emulsões de água e óleo foram sintetizadas em condições de laboratório. A concentração de água variou entre 13,1% à 41,1% em volume para as emulsões A/O e de 50% à 60% em volume para as emulsões O/A à temperaturas de 25°C à 62°C e salinidade da água de 0 (água deionizada), 1Kg/m³ e 10Kg/m³ de NaCl. A constante dielétrica e condutividade das emulsões foram medidas em um sensor composto por dois cilindros concêntricos cuja área dos eletrodos é bem maior que a distância entre eles. Essa geometria favorece os efeitos polarização e é apropriada para materiais dielétricos como as emulsões A/O, além de aumentar o erro de medição em soluções condutivas. Para melhores resultados com as emulsões O/A foi utilizado em sensor de placas paralelas com uma distância entre eletrodos bem maior que a sua área o que favorece os efeitos de transporte de carga. Os dados foram medidos por uma Ponte RLC de precisão Agilent E4980A em uma faixa de frequência de 20Hz à 1MHz. Os dados obtidos nos testes foram proporcionais à concentração de água na solução e seguiram o modelo matemático de Maxwell com um erro máximo de 4%. Os resultados também mostraram que a constante dielétrica não sofre influência significativa da temperatura e salinidade da água, assim como a medida do volume de água. Já para as emulsões O/A os testes mostraram grande influência da temperatura e salinidade da água nas medições, onde o conhecimento prévio destas condições é imprescindível ao método
Abstract: The volumetric concentration of water in crude oil production is a parameter constantly monitored to access the ever changing reservoir properties as well as for economical purposes; after all what is needed is the net oil production. The measurement of water concentration is usually done in over-the-bench (sampling the crude stream and screening in a chemistry lab) or by online instruments which continuously monitor the concentration. One of the techniques for online assessment of water concentration is the impedance spectroscopy. In fact, the dielectric and conductive property of the liquid phase is proportional to the electrical impedance. In the present analysis it was considered the two basic types of emulsions: the water in oil (W/O) and the oil in water (O/W). The objective of this work was to compare the measured water concentration against model's prediction based on the measured dielectric and conductive properties of the emulsions. The water and oil emulsions were synthesized in laboratory conditions. The water concentration range was 13.1% to 41.1% (v/v) for W/O emulsions and 50% to 60% (v/v) for O/W emulsions at temperatures of 25oC to 62oC and water salinity of 0 (de-ionized water), 1Kg/m³ and 10Kg/m³ of NaCl. The emulsion dielectric constant and conductivity were measured in a sensor made by two concentric cylinders whose electrodes area is much bigger than the distance between them. This geometry favors the polarization effects and is appropriate for dielectric solution as A/O emulsions. For better results for the O/A emulsion it was used a parallel electrode sensor where the distance between the electrodes is much bigger than the electrodes area which favors the charge transport effects. The data were measured by the Precision LCR Meter Agilent E4980A in a frequency range of 20Hz to 1MHz. The experimental data was found proportional to the volumetric concentration and follows Maxwell correlation within 4%. The experimental tests also disclosed that the dielectric constant, or the volumetric concentration, were almost insensitive to the changes in temperature and in salinity and so the water concentration of W/O emulsions. For O/W emulsions the tests showed a great influence of the temperature and salinity on the conductivity measurements. So, for O/W emulsions the temperature and water salinity must be considered
Mestrado
Mecanica dos Sólidos e Projeto Mecanico
Mestre em Engenharia Mecânica
Bigon, Joice Palma 1989. "Óleos vegetais como novos coestabilizadores para reações de polimerização em miniemulsão." [s.n.], 2015. http://repositorio.unicamp.br/jspui/handle/REPOSIP/266022.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Química
Made available in DSpace on 2018-08-27T17:40:21Z (GMT). No. of bitstreams: 1 Bigon_JoicePalma_M.pdf: 3554482 bytes, checksum: 613d2feb1ca89033c773d6e4555ce420 (MD5) Previous issue date: 2015
Resumo: O estudo das nanocápsulas poliméricas tem crescido significativamente nas últimas décadas em diversas áreas, pois estas permitem a encapsulação de materiais com diferentes princípios ativos, contribuindo com uma ampla variedade de funções que vão desde a liberação controlada de medicamentos e perfumes até a melhora na retenção de pigmentos de tintas para impressão. Uma das técnicas que tem sido utilizada para a síntese das nanocápsulas poliméricas é a polimerização em miniemulsão, que apresenta como uma de suas vantagens a praticidade de se poder utilizar um iniciador organossolúvel ou hidrossolúvel, bem como obter as nanocápsulas poliméricas com um alto grau de eficiência em apenas uma única etapa. Além disso, a polimerização em miniemulsão é conduzida em água, sendo um importante fator quando relacionado ao aspecto ambiental. Entretanto, para se obter uma polimerização em miniemulsão estável, é necessária a adição de um coestabilizador. Muitos artigos na literatura apresentam o hexadecano como um coestabilizador eficiente, uma vez que ele apresenta baixa massa molar e é insolúvel em água. Entretanto, a aplicabilidade das nanocápsulas pode ser aumentada quando materiais biodegradáveis e biocompatíveis são usados. Por isso, neste trabalho foi proposto o estudo de três óleos vegetais (coco, argan e jojoba) como novos coestabilizadores para reações de polimerização em miniemulsão. O óleo de coco é constituído principalmente de ácido láurico, e possui propriedades anti-inflamatórias. O óleo de jojoba é formado principalmente de ésteres, e assim como o óleo de coco, possui propriedades anti-inflamatórias, entre outras. Já o óleo de argan é constituiído principalmente de ácido oleico e linoleico, e possui propriedades muito benéficas para a pele e cabelo. Para as reações de polimerizaçãoem miniemulsão, foi utilizado o iniciador organossolúvel 2,2¿-azobis-isobutironitrila, o monômero metacrilato de metila e o lauril sulfato de sódio como surfactante. Diferentemente da literatura estudada, a polimerização foi realizada em reator tanque agitado de 1 litro de capacidade, e foram estudados os efeitos dos óleos vegetais como coestabilizador na polimerização em miniemulsão de metacrilato de metila. Além disso, foi estudada a distribuição da massa molar, a cinética da reação, a temperatura de transição vítrea bem como o tamanho médio das nanocápsulas poliméricas. A partir dos resultados obtidos, concluiu-se que todos os óleos vegetais atuam como eficientes coestabilizadores, prevenindo o sistema da degradação difusional e da coalescência das gotas
Abstract: The study of polymeric nanocapsules has grown significantly in recent decades in many areas, as they enable the encapsulation of materials with different active ingredients, contributing to a wide variety of functions ranging from the controlled release of drugs and perfumes to the improvement in retention paint pigments for printing. One of the techniques that has been used for the synthesis of polymeric nanocapsules is the miniemulsion polymerization, presenting as one of its advantages the convenience of being able to use either a water or oil soluble initiator, and to obtain the nanocapsules with a high efficiency degree in only one step. Furthermore, miniemulsion polymerization is conducted in water, being an important factor when relating to the environmental aspect. However, to obtain a stable miniemulsion polymerization, adding a co-stabilizer is required. Many articles in the literature cited hexadecane as an efficient co-stabilizer, since it presents low molar mass and it is insoluble in water. However, the applicability of the nanocapsules can be increased when biodegradable and biocompatible materials are used. Therefore, this study proposed the study of three vegetable oils (coconut, argan and jojoba) as new co-stabilizers for polymerization miniemulsion reactions. The coconut oil is composed primarily of lauric acid, and it has anti-inflammatory properties. Jojoba oil is composed primarily of esters, and as coconut oil, presents anti-inflammatory properties, among others. Argan oil is composed mainly of oleic and linoleic acid and it has very beneficial properties for skin and hair. For miniemulsion polymerization reactions, it was used the oil soluble initiator 2¿2-azobisisobutyronitrile, the monomer methyl methacrylate and sodium lauryl sulfate as surfactant. Different from other studies, the polymerization was conducted in stirred tank reactor of 1 liter of capacity, and the effect of the vegetable oils acting as co-stabilizer in the methyl methacrylate miniemulsion polymerization was studied. In addition, the molar mass distribution, the kinetics of the reaction, the glass transition temperature and the average size of the polymeric nanocapsules were studied. It was concluded that the vegetable oils act in the stability of the miniemulsion polymerization, preventing the system from diffusion of monomers and coalescence
Mestrado
Desenvolvimento de Processos Químicos
Mestra em Engenharia Química
Yamamichi, Erika. "Estudo químico e avaliação da atividade antiprotozoária in vitro do óleo volátil de Lavandula angustifolia Miller (Lamiaceae)." Universidade de São Paulo, 2014. http://www.teses.usp.br/teses/disponiveis/9/9138/tde-04102017-170935/.
Повний текст джерелаThe number of people infected by Leishmania and Trypanosoma cruzi protozoa around the world has increased and raised concerns that approximately 12 million cases of leishmaniasis and 7 to 8 million cases of Chagas disease have been reported. The alarming statistics involving these diseases and limitations of therapeutics currently in use point to an urgent need for new drugs. Considered one of the main strategies available, research on plants containing bioactive constituents is a promising source of potentially active molecules. Species of Lavandula genus have shown in vitro anti-Leishmania activity and this encouraged the present study on L. angustifolia (Lamiaceae) species. Although several pharmacological activities have been identified, the antiprotozoal activity against these specific agents has not yet been approached. Moreover, the possibility of a large-scale production and its quite comprehensive use worldwide, especially for the manufacturing of cosmetics, perfumes and household sanitizing products have attracted our interest. This study aimed at the analysis of the volatile oil compounds of the L. angustifolia species acclimatized in Brazil as well as the evaluation of the in vitro antiprotozoal activity against the strains of Leishmania (L.) infantum, L. (L.) amazonensis and Trypanosoma cruzi. The CG-EM analysis of the volatile oil from the inflorescences and leaves has shown monoterpenes as majority constituents also allowing a comparative analysis between these organs. Overall, the oil was not active against the Leishmania species but presented promising anti-Trypanosoma activity.
Messager, Léa. "Nanogels de polysaccharides pour la délivrance d’insuline." Thesis, Bordeaux 1, 2012. http://www.theses.fr/2012BOR14690/document.
Повний текст джерелаNanogels are an attractive class of delivery systems. These soft particles, made of highly swollen polymer network, can physically entrap a drug and release it at a rate depending on its diffusion though the network. Therefore, any change in the swelling degree can trigger the release kinetics. This parameter can be tuned by modifying the density of cross-links in the gel matrix or by changing the environmental conditions such as pH, temperature or analyte such as glucose. Thus, glucose-responsive nanogels are good candidates to be used as self-regulated systems for insulin delivery. To fulfill both biocompatibility and biodegradability criteria, our attention has been focused on the design of new nanogels made of polysaccharides, in particular made of hyaluronic acid (HA), as a main constituent. HA was at first covalently modified with polymerizable methacrylate functions and confined in nanoreactors during photopolymerization using water-in-oil miniemulsions as template. Biodegradable nanogels with a well-defined size and various cross-linking degrees were thus achieved, thanks to a good control of 1) the chemical modification of HA with methacrylates (degree of methacrylation) 2) the emulsion template (size, stability), 3) the photopolymerization conditions which governed the conversion rate of the polymerization. Further modification of the polysaccharide with phenylboronic acid as a glucose-sensitive group yielded nanogels whose swelling behavior could vary as a function of glucose concentration. These systems were further studied as insulin delivery systems. Moreover, their biodegradability, stability and biocompatibility were assessed
Scanavini, Helena Finardi Alvares. "Destilação em batelada de aroma natural de caju e oleo essencial de manjericão : investigação via simulação computacional." [s.n.], 2006. http://repositorio.unicamp.br/jspui/handle/REPOSIP/255111.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia de Alimentos
Made available in DSpace on 2018-08-08T15:25:45Z (GMT). No. of bitstreams: 1 Scanavini_HelenaFinardiAlvares_M.pdf: 3144443 bytes, checksum: f6733d6ff56270059b3021e96e08e996 (MD5) Previous issue date: 2006
Resumo: O aroma de um alimento é o resultado da combinação de diversas substâncias voláteis, de diferentes classes químicas, sendo que nenhuma delas é individualmente responsável pelo aroma, mas sim a combinação entre elas. Atualmente, os aromatizantes são amplamente utilizados na indústria alimentícia, seja para conferir um determinado aroma a um produto, ou para reforçar o aroma característico já existente, como de um suco, por exemplo. A concentração de sucos de frutas reduz o volume, sendo importante para o armazenamento, embalagem e transporte. Porém, durante o processo convencional de concentração, a maioria dos componentes aromatizantes é perdida, sendo necessário recuperar a fração aromatizante do suco de fruta durante a concentração. Existem vários processos utilizados para a recuperação de aroma e concentração de suco. O aroma concentrado pode, então, ser reincorporado no suco concentrado para obter uma bebida com aroma natural e característico da fruta. O mercado internacional tem demonstrado grande interesse nos sucos de frutas tropicais, entretanto parcela das indústrias nacionais ainda não alcançou desenvolvimento tecnológico para competir em um mercado no qual os produtos obtidos devem apresentar certas características de qualidade. No caso do óleo essencial de manjericão, ele tem atraído a atenção de pesquisadores por possuir grande quantidade de linalol, uma substância de largo emprego na indústria de aromas e perfumes, também encontrada no pau-rosa, árvore amazônica em extinção. Assim, neste trabalho foram estudadas, através da simulação computacional, condições operacionais e construtivas (número de estágios) de colunas de destilação em batelada de aroma natural de caju e de óleo essencial de manjericão. No caso do aroma natural de caju, foram investigadas as condições que garantissem uma maior recuperação dos compostos voláteis desejáveis, para serem reincorporados ao suco concentrado ou utilizados na formulação de outros produtos alimentícios e também a purificação deste aroma em relação ao ácido 2-metil butanóico, considerável indesejável, devido ao seu odor desagradável. Enquanto que para o óleo essencial de manjericão, foram estudadas as melhores condições para o fracionamento de seus componentes de maior interesse comercial, visando a obtenção destes com o maior grau de pureza possível, para a utilização pela indústria alimentícia, de perfumaria ou farmacêutica
Abstract: The flavor is a combination of some volatile substances, of different chemical classes. However none of them is individually responsible for a specific flavor, but a combination of them. Nowadays flavor compounds are widely used in the food industry, either to confer one definitive flavor to a product, or to strengthen an existing characteristic flavor, as of a juice, for example. The fruit juice concentration reduces the volume, being important to the storage, packing and transportation. However, during the conventional concentration process, the majority of the flavor components is lost, being necessary to recover the juice flavor fraction lost during the concentration. There are some information of different processes used for the flavor recovery and juice concentration. The concentrated flavor can then be reintroduced in the concentrated juice to get a beverage with the natural and characteristic flavor of the fruit. The international market has demonstrated a great interest in tropical fruit juices. However, a share of the domestic industries still has not developed technologies to compete in a market in which the products must present certain quality characteristics. In the case of the essential oil of basil, it has attracted the attention of researchers for containing a large amount of linalool, a substance with high ability of setting odors, also found in the wood-rose, an Amazonian tree in extinguishing. Therefore, in this work, it had been studied, through computer simulation, operational and design conditions of a batch distillation column of the natural flavor of cashew fruit and essential oil of basil. In the case of the cashew natural flavor, it was investigated the conditions that guarantee a larger recovery of desirable volatile compounds, to be reintroduced to the concentrated juice or used in the formulation of other nourishing products and also the purification of this flavor in relation to the 2-methylbutanoic acid, considered undesirable and of unpleasant odor. For the essential oil of basil, the best conditions for the purification of its components of larger commercial interest had been studied, aiming at obtaining them with the largest degree of possible purity, for the nourishing, cosmetic or pharmaceutical industry uses
Mestrado
Mestre em Engenharia de Alimentos
Maschietto, Claudinei. "Estudo da influência de aditivos em óleo mineral para têmpera." Universidade de São Paulo, 1998. http://www.teses.usp.br/teses/disponiveis/88/88131/tde-27102017-151925/.
Повний текст джерелаAmong heat treating the quenching, that is speed cooling the steel after austenitizing, is the more utilised. In this treatment the seek is martensite structure, that confer of steel full hardness and strenght. The water, polymer solutions and oils are the quenchant very usually for quencher steels. The oils very used how quenchant are mineral oils. For improve the performance this type of oil to get used to utilize additive, how accelerators and wetts. This additives actuate principally in the first and second cooling stages (vapour phase and boiling respectivally). Utilizing additives based in calcium salt and a mineral oil by Microquímica Company, can be formulated a quenching oil, direct obtain a speed oil, so that check increased in the cooling rate, and also the performance with changed worlk temperature (60°C and 80°C).
Martins, Louise Maria Giansante. "Avaliação de doses em órgãos em procedimentos de tomografia computadorizada utilizando dosímetros TL e OSL." Universidade de São Paulo, 2017. http://www.teses.usp.br/teses/disponiveis/43/43134/tde-22012018-133105/.
Повний текст джерелаSince the development of the first Computed Tomography (CT) equipment in the early 1970s, this diagnostic imaging modality has gone through several improvements. Exclusively digital and high quality images production without superposition of anatomical structures, examinations as fast as five seconds, and the capability of diagnosing important pathologies with no need of exploratory surgeries are some of the great advantages when using this technique. As a consequence, the role of this diagnostic procedure has been widely increasing worldwide. In the US, for instance, 2.2 million CT exams were performed in 1980, only 10 years after its implementation. This number increased to 78.7 million in 2015. As a result, absorbed dose by patients due to this technique has become a concern among radiologists, researchers and manufacturers, leading to the development of different methodologies to evaluate it. Ionization chambers, thermoluminescence (TL) and, more recently, optically stimulated luminescence (OSL) dosimetry, for instance, have been widely applied in order to estimate in vivo organ doses, in post-mortem subjects and in phantoms. Another approach that has been extensively used are the Monte Carlo simulations, which can be applied in comparison with experimental results. An experimental approach to evaluate organ doses in pediatric and adult anthropomorphic phantoms by using TLDs and OSLDs was employed in the present study. Several analyses were performed in order to stablish the best way to achieve the main results in this investigation and the methodology proved to be efficient. The characteristics of the OSLDs were analyzed to verify their applicability for evaluating doses from CT procedures. The characterization included homogeneity, linearity with the incident air kerma, reproducibility, reusability and an energy-dependent response to distinct effective energies evaluation. These dosimeters were applied along with TLDs in an adult and a pediatric anthropomorphic phantoms to evaluate organ doses due to clinical CT protocols. These protocols were selected after an analysis of patient data collected from the Institute of Radiology of the School of Medicine of the University of São Paulo (Instituto de Radiologia da Faculdade de Medicina da Universidade de São Paulo). Organ doses measured with dosimeters were compared with Monte Carlo simulations. Differences between measured and simulated absorbed organ doses were within ±20%. Moreover, these results showed that a misalignment and incorrect positioning of the patient in the couch can increase an organ dose by more than 100%.
Aubaud, Cyril. "Processus de dégazage et sources mantelliques dans les magmas de type MORB et OIB : le carbone, l'eau et les gaz rares : aspects chimiques et isotopiques." Paris 7, 2002. http://www.theses.fr/2002PA077011.
Повний текст джерелаCosta, Odair Jose. "Estudo sobre injeção de agua acima da pressão de propagação de fratura." [s.n.], 2008. http://repositorio.unicamp.br/jspui/handle/REPOSIP/265462.
Повний текст джерелаDissertação (mestrado) - Universidade Estadual de Campinas, Faculdade de Engenharia Mecanica, Instituto de Geociencias
Made available in DSpace on 2018-08-12T22:36:54Z (GMT). No. of bitstreams: 1 Costa_OdairJose_M.pdf: 3077427 bytes, checksum: 9a5e85d5b3ea4c69fdd9a468b62a50de (MD5) Previous issue date: 2008
Resumo: A reinjeção de água produzida é um método muito utilizado para descarte de água e para suporte de pressão e energia do reservatório. Um problema comum da reinjeção é a perda de injetividade, que prejudica o processo e impede a operação em níveis ótimos de injeção. A perda de injetividade pode ser minimizada pela injeção de água com pressão acima da pressão de fratura do reservatório (IPF), que procura restaurar a capacidade de injeção. Para estudar este processo, um simulador geomecânico para modelagem da fratura é combinado com um simulador numérico de reservatórios para modelar e otimizar a condição de operação dos poços injetores. A fratura é representada por um poço horizontal virtual, de forma conjunta com formulações analíticas de declínio hiperbólico de permeabilidade, para representar o efeito do dano de formação. O objetivo do trabalho é estudar alguns casos para verificar em quais situações a IPF é conveniente. O modelo de simulação estudado foi um reservatório sintético com um arranjo de drenagem de cinco pontos invertido representando uma parte de um reservatório. Foram considerados três cenários, onde a variação foi o tipo de óleo empregado (leve, intermediário e pesado). Estes cenários foram elaborados com a finalidade de representar algumas possíveis situações que podem ocorrer em um campo real, onde a pressão de iniciação de fratura pode ser atingida pelo efeito da perda de injetividade ou devido às propriedades rocha-fluido. O desempenho da IPF foi avaliado utilizando o valor presente líquido (VPL) e produções acumuladas de óleo e água. Os resultados mostraram que o estudo da IPF pode ser considerado como parte de um processo de otimização de vazão de injeção, onde a fratura pode ou não ocorrer. Mostra-se que a IPF, em geral, antecipa a produção de óleo para os casos de viscosidade intermediária e alta, tornando o método bastante vantajoso, embora com maior produção de água. Já estudos com óleo leve indicam que a técnica só é interessante quando houver significativa perda de injetividade, onde a IPF serve como reparadora da injetividade
Abstract: Produced water re-injection is a valuable method of water disposal and pressure and energy support. A common water re-injection problem is the injectivity loss, which affects negatively the process and restrains optimal water injection rates. The injectivity loss can be minimized by water injection with fracture propagation pressure (IFPP), which aims to restore injection capacity. To study this process, a geo-mechanical simulator for fracture modeling combined with a commercial reservoir simulation package is used to model and to optimize the operation condition of water injection wells. The fracture is represented by a virtual horizontal well and analytical formulations of hyperbolic decline of permeability are used to represent the effect of formation damage. This work aims the study of some cases to verify in which situations the IFPP is convenient. The simulation model studied is a synthetic reservoir with a five-spot pattern, representing a region of a reservoir. Three scenarios are considered, with different oil types (light, intermediate and heavy). These scenarios are proposed to reproduce some possible situations, where fracture pressure can be reached by the effect of the injectivity loss or due to rock and fluid characteristics. The behavior of the IFPP is evaluated using the net present value (NPV) and cumulative oil and water productions. The results showed that the IFPP study can be considered as part of an optimization problem of injection flow, where the fracture may occur. It is shown that IFPP, in general, presents advantages for intermediate and high viscosity oil because it anticipates oil production. Studies with light oil indicate that the technique is only interesting when there is significant injectivity loss, where IFPP is desirable for injectivity restoration
Mestrado
Reservatórios e Gestão
Mestre em Ciências e Engenharia de Petróleo
Silva, Roberval Alves da. "Estudos eletroquímicos fundamentais para a detecção de fenol em interfaces do tipo petróleo/água." reponame:Repositório Institucional da UFABC, 2015.
Знайти повний текст джерелаDissertação (mestrado) - Universidade Federal do ABC. Programa de Pós-Graduação em Ciência e Tecnologia/Química, 2015.
O presente trabalho é referente à utilização de técnicas eletroanalíticas diretamente na interface formada entre dois líquidos imiscíveis. Esta nova metodologia de trabalho está em pleno desenvolvimento em nosso grupo de pesquisa, apresentando resultados promissores em diversas vertentes. De maneira específica neste projeto, os estudos foram realizados em fase aquosa, constituída ora por uma solução de NaCl 1x10-3 mol L-1, ora por água do mar, bem como em fase oleosa, aqui representada pelo petróleo bruto. Utilizou-se o eletrodo impresso de carbono como ferramenta de trabalho, aplicando-se técnicas eletroanalíticas, tais como a voltametria cíclica e a voltametria de onda quadrada. Contaminou-se artificialmente o petróleo com algumas moléculas-modelo, em particular o fenol e o cicloexano. Para iniciar os experimentos, verificou-se a possibilidade de obtenção das respostas de oxidação ou redução das moléculas a partir da técnica de voltametria cíclica, utilizando nesta etapa o NaCl 1x10-3 mol L-1 como eletrólito suporte. Em seguida, estudaram-se os mesmos sistemas por voltametria de onda quadrada, técnica esta mais sensível e adequada para fins analíticos. Resultados obtidos mostraram ser possível realizar a caracterização de moléculas introduzidas artificialmente à fase petróleo. Foram satisfatórios nos experimentos realizados neste trabalho a obtenção de dados que permitiram se obter voltamogramas para melhor análise e compreensão dos fenômenos de oxidação e redução das moléculas estudadas. Para tanto, foi utilizando como ferramenta principal as técnicas eletroanalíticas. Ainda, houve a possibilidade de se determinar o tempo de saturação do eletrodo impresso de carbono, na área interfacial petróleo/água. Deste trabalho qualitativo, foi possível concluir que todas as moléculas propostas neste projeto foram detectadas com êxito, ou seja, a técnica proposta em interfaces foi eficiente para a finalidade proposta. Trabalhos futuros serão necessários para refinar a metodologia e aplicar o sistema em amostras reais.
This work describes the use of a new electrochemical technique applied directly at the interface between two immiscible liquids. This new methodology is now been developed in our group and promising results were found in different research lines. More specifically, the studies in this project were carried out in aqueous support electrolyte solution constituted by a home-made 1 x 10-3 NaCl solution and also constituted by natural sea salt water. The organic phase was constituted by crude oil. A carbon screen-printed electrode was used as the main tool in this work. Cyclic Voltammetry (CV) and Square Wave Voltammetry (SWV) were used as electrochemical techniques. Portions of crude oil were contaminated with model molecules, as phenol and cyclohexane. Firstly, the CV was used to determine the possibility of detection. Following these preliminary studies, SWV studies were carried out since that technique is more adequate to promote analytical studies. Results indicates that was possible to characterize molecules artificially introduced to oil phase. Furthermore, it was possible to determine the time of saturation of the printed-screen carbon electrode at the interfacial Oil / water region. It was possible to conclude from this qualitative work that all molecules were successfully detected directly at the crude oil/water interface. On the other hand, future works will be necessary to improve this kind of methodology.