Статті в журналах з теми "Electronic manufacturing processes"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Electronic manufacturing processes".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Michaelides, Roula, Dennis Kehoe, and Matthew Tickle. "Using electronic Customer Relationship Management to improve manufacturing processes." International Journal of Agile Systems and Management 2, no. 3 (2007): 321. http://dx.doi.org/10.1504/ijasm.2007.015796.
Повний текст джерелаSeyedin, Shayan, Tian Carey, Adrees Arbab, Ladan Eskandarian, Sivasambu Bohm, Jong Min Kim, and Felice Torrisi. "Fibre electronics: towards scaled-up manufacturing of integrated e-textile systems." Nanoscale 13, no. 30 (2021): 12818–47. http://dx.doi.org/10.1039/d1nr02061g.
Повний текст джерелаPalajova, Silvia, and Milan Gregor. "Simulation Metamodelling of Manufacturing Processes." Communications - Scientific letters of the University of Zilina 13, no. 4 (December 31, 2011): 51–54. http://dx.doi.org/10.26552/com.c.2011.4.51-54.
Повний текст джерелаBecker, K. F., S. Voges, P. Fruehauf, M. Heimann, S. Nerreter, R. Blank, M. Erdmann, et al. "Implementation of Trusted Manufacturing & AI-based process optimization into microelectronic manufacturing research environments." International Symposium on Microelectronics 2021, no. 1 (October 1, 2021): 000021–25. http://dx.doi.org/10.4071/1085-8024-2021.1.
Повний текст джерелаLeckie, F. A., and R. M. McMeeking. "Processing and Manufacturing." Applied Mechanics Reviews 38, no. 10 (October 1, 1985): 1297–300. http://dx.doi.org/10.1115/1.3143697.
Повний текст джерелаCobley, A. J. "Alternative surface modification processes in metal finishing and electronic manufacturing industries." Transactions of the IMF 85, no. 6 (November 2007): 293–97. http://dx.doi.org/10.1179/174591907x246528.
Повний текст джерелаLiang, R. C., Jack Hou, HongMei Zang, Jerry Chung, and Scott Tseng. "Microcup® displays: Electronic paper by roll-to-roll manufacturing processes." Journal of the Society for Information Display 11, no. 4 (2003): 621. http://dx.doi.org/10.1889/1.1825690.
Повний текст джерелаLi, Ji, Thomas Wasley, Duong Ta, John Shephard, Jonathan Stringer, Patrick J. Smith, Emre Esenturk, Colm Connaughton, Russell Harris, and Robert Kay. "Micro electronic systems via multifunctional additive manufacturing." Rapid Prototyping Journal 24, no. 4 (May 14, 2018): 752–63. http://dx.doi.org/10.1108/rpj-02-2017-0033.
Повний текст джерелаUshijima, Hirobumi, Ken-ichi Nomura, Yasuyuki Kusaka, Shusuke Kanazawa, Yoshinori Horii, Mariko Fujita, and Noritaka Yamamoto. "Development of Manufacturing Processes for Novel Electronics by Print Technology." Journal of The Japan Institute of Electronics Packaging 21, no. 6 (September 1, 2018): 567–72. http://dx.doi.org/10.5104/jiep.21.567.
Повний текст джерелаMANDUTIANU, DAN, and SERBAN VOINEA. "Knowledge based processes in flexible manufacturing." International Journal of Computer Integrated Manufacturing 1, no. 3 (July 1988): 197–205. http://dx.doi.org/10.1080/09511928808944361.
Повний текст джерелаSchmidt, Michael, Narendra B. Dahotre, David Bourell, and Ehsan Toyserkani. "Laser-based additive manufacturing: Processes and materials." Optics & Laser Technology 139 (July 2021): 106999. http://dx.doi.org/10.1016/j.optlastec.2021.106999.
Повний текст джерелаSalaoru, Iulia, Salah Maswoud, and Shashi Paul. "Inkjet Printing of Functional Electronic Memory Cells: A Step Forward to Green Electronics." Micromachines 10, no. 6 (June 22, 2019): 417. http://dx.doi.org/10.3390/mi10060417.
Повний текст джерелаPeralta, M. Estela, Mariano Marcos, Francisco Aguayo, and Juan Ramón Lama. "Advanced fractal manufacturing: multi-level and multi-scale proposal for sustainable manufacturing processes." International Journal of Mechatronics and Manufacturing Systems 10, no. 1 (2017): 3. http://dx.doi.org/10.1504/ijmms.2017.084375.
Повний текст джерелаLama, Juan Ramón, Francisco Aguayo, Mariano Marcos, and M. Estela Peralta. "Advanced fractal manufacturing: multi-level and multi-scale proposal for sustainable manufacturing processes." International Journal of Mechatronics and Manufacturing Systems 10, no. 1 (2017): 3. http://dx.doi.org/10.1504/ijmms.2017.10005281.
Повний текст джерелаCobley, A. J., J. E. Graves, A. Kassim, B. Mkhlef, and B. Abbas. "Ultrasonically Enabled Low Temperature Electroless Plating for Advanced Electronic Manufacture." International Symposium on Microelectronics 2013, no. 1 (January 1, 2013): 000183–87. http://dx.doi.org/10.4071/isom-2013-ta63.
Повний текст джерелаStoll, Thomas, Aarief Syed-Khaja, and Joerg Franke. "Prototyping and Production of High-temperature Power Electronic Substrates through Additive Manufacturing Processes." International Symposium on Microelectronics 2017, no. 1 (October 1, 2017): 000761–67. http://dx.doi.org/10.4071/isom-2017-thp51_10.
Повний текст джерелаKeatch, Robert P., and Brian Lawrenson. "Practical Microelectronics for Electronic Engineering Students." International Journal of Electrical Engineering & Education 35, no. 2 (April 1998): 117–38. http://dx.doi.org/10.1177/002072099803500203.
Повний текст джерелаBarzdenas, Vaidotas, Gediminas Grazulevicius, and Aleksandr Vasjanov. "TCAD tools in undergraduate studies: A laboratory work for learning deep submicron CMOS processes." International Journal of Electrical Engineering & Education 57, no. 2 (May 22, 2019): 133–63. http://dx.doi.org/10.1177/0020720919846811.
Повний текст джерелаManogharan, Guha, Richard A. Wysk, and Ola L. A. Harrysson. "Additive manufacturing–integrated hybrid manufacturing and subtractive processes: economic model and analysis." International Journal of Computer Integrated Manufacturing 29, no. 5 (November 17, 2015): 473–88. http://dx.doi.org/10.1080/0951192x.2015.1067920.
Повний текст джерелаLabadie, Iris. "Advanced Manufacturing Methods for Brazing High-Reliability Electronic Packages." International Symposium on Microelectronics 2012, no. 1 (January 1, 2012): 000063–65. http://dx.doi.org/10.4071/isom-2012-ta23.
Повний текст джерелаGalliani, Marina, Laura M. Ferrari, Guenaelle Bouet, David Eglin, and Esma Ismailova. "Tailoring inkjet-printed PEDOT:PSS composition toward green, wearable device fabrication." APL Bioengineering 7, no. 1 (March 1, 2023): 016101. http://dx.doi.org/10.1063/5.0117278.
Повний текст джерелаIbrahim, Abdul Razak, Ali Hussein Zolait, and Veera Pandiyan Sundram. "Supply Chain Management Practices and Firm Performance." International Journal of Technology Diffusion 1, no. 3 (July 2010): 48–55. http://dx.doi.org/10.4018/jtd.2010070103.
Повний текст джерелаPolyanskov, Yu V., A. I. Sidorova, O. V. Zheleznov, and M. N. Yardaeva. "AUTOMATED FORMATION OF A NORMATIVE CARD FOR MANUFACTURING PARTS BASED ON ELECTRONIC TECHNOLOGICAL PROCESSES." Izvestiya of Samara Scientific Center of the Russian Academy of Sciences 22, no. 2 (2020): 142–47. http://dx.doi.org/10.37313/1990-5378-2020-22-2-142-147.
Повний текст джерелаChoi, Injun, Chulsoon Park, and Changwoo Lee. "A transactional workflow model for engineering/manufacturing processes." International Journal of Computer Integrated Manufacturing 15, no. 2 (January 2002): 178–92. http://dx.doi.org/10.1080/09511920110059061.
Повний текст джерелаTai, Y. T., and W. L. Pearn. "Measuring the Manufacturing Yield for Skewed Wire Bonding Processes." IEEE Transactions on Semiconductor Manufacturing 28, no. 3 (August 2015): 424–30. http://dx.doi.org/10.1109/tsm.2015.2422839.
Повний текст джерелаSyed-Khaja, Aarief, Christopher Kaestle, and Joerg Franke. "Feasibility Studies on Selective Laser Melting of Copper Powders for the Development of High-temperature Circuit Carriers." International Symposium on Microelectronics 2016, no. 1 (October 1, 2016): 000517–22. http://dx.doi.org/10.4071/isom-2016-poster1.
Повний текст джерелаKuznetsov, Evgeny V., Dmitry N. Ermakov, Oleg E. Samusenko, Yuri D. Golyaev, Tatyana I. Solovyeva, and Nikita E. Kuznetsov. "Features of the use of computer modeling tools for improving the manufacturing processes of laser gyroscopes." T-Comm 15, no. 12 (2021): 31–43. http://dx.doi.org/10.36724/2072-8735-2021-15-12-31-43.
Повний текст джерелаOlivas, Richard, Rudy Salas, Dan Muse, Eric MacDonald, Ryan Wicker, Mike Newton, and Ken Church. "Structural Electronics through Additive Manufacturing and Micro-Dispensing." International Symposium on Microelectronics 2010, no. 1 (January 1, 2010): 000940–46. http://dx.doi.org/10.4071/isom-2010-tha5-paper6.
Повний текст джерелаGutierrez, Cassie, Rudy Salas, Gustavo Hernandez, Dan Muse, Richard Olivas, Eric MacDonald, Michael D. Irwin, et al. "CubeSat Fabrication through Additive Manufacturing and Micro-Dispensing." International Symposium on Microelectronics 2011, no. 1 (January 1, 2011): 001021–27. http://dx.doi.org/10.4071/isom-2011-tha4-paper3.
Повний текст джерелаHehr, Adam, Mark Norfolk, Dan Kominsky, Andrew Boulanger, Matthew Davis, and Paul Boulware. "Smart Build-Plate for Metal Additive Manufacturing Processes." Sensors 20, no. 2 (January 8, 2020): 360. http://dx.doi.org/10.3390/s20020360.
Повний текст джерелаNoamna, Somkeit, Theerapong Thongphun, and Chalermpon Kongjit. "TRANSFORMER PRODUCTION IMPROVEMENT BY LEAN AND MTM-2 TECHNIQUE." ASEAN Engineering Journal 12, no. 2 (June 1, 2022): 29–35. http://dx.doi.org/10.11113/aej.v12.16712.
Повний текст джерелаRuikar, K., C. J. Anumba, and P. M. Carrillo. "Reengineering construction business processes through electronic commerce." TQM Magazine 15, no. 3 (June 2003): 197–212. http://dx.doi.org/10.1108/09544780310469343.
Повний текст джерелаBinnard, Mike, and Mark R. Cutkosky. "Design by Composition for Layered Manufacturing*." Journal of Mechanical Design 122, no. 1 (January 1, 1999): 91–101. http://dx.doi.org/10.1115/1.533549.
Повний текст джерелаKikuchi, Akihisa, Evelitsa Higuerey, and John Coulter. "An Experimental Investigation of Resin Flow Sensing During Molding Processes." Journal of Engineering Materials and Technology 117, no. 1 (January 1, 1995): 86–93. http://dx.doi.org/10.1115/1.2804376.
Повний текст джерелаPark, Won-Tae, and Yong-Young Noh. "A self-aligned high resolution patterning process for large area printed electronics." Journal of Materials Chemistry C 5, no. 26 (2017): 6467–70. http://dx.doi.org/10.1039/c7tc01590a.
Повний текст джерелаChang, Shing I., and Mohammadhossein Amini. "Intelligent data-driven monitoring of high dimensional multistage manufacturing processes." International Journal of Mechatronics and Manufacturing Systems 13, no. 4 (2020): 299. http://dx.doi.org/10.1504/ijmms.2020.10034619.
Повний текст джерелаIshizuka, Yasunari, Tadashi Kurata, Hiroyuki Hashiba, Keisuke Naruse, and Hiroshi Deguchi. "A Study of State Management System in Manufacturing Processes using IoT." IEEJ Transactions on Electronics, Information and Systems 140, no. 6 (June 1, 2020): 573–82. http://dx.doi.org/10.1541/ieejeiss.140.573.
Повний текст джерелаKUZNETSOV, EVGENY, DMITRII ERMAKOV, OLEG SAMUSENKO, YURI GOLYAEV, YURI KOLBAS, YURI KOFANOV, TATYANA SOLOVYEVA, NIKITA KUZNETSOV, and YURI VINOKUROV. "TECHNICAL AND ECONOMIC ASPECTS OF IMPROVING THE PROCESSES OF MANUFACTURING LASER GYROSCOPES USING METHODS OF COMPUTER SIMULATION." Computational Nanotechnology 8, no. 3 (September 28, 2021): 36–49. http://dx.doi.org/10.33693/2313-223x-2021-8-3-36-49.
Повний текст джерелаDolins, S. B. "Analyzing manufacturing processes to determine the placement of diagnostic systems." IEEE Transactions on Components, Hybrids, and Manufacturing Technology 15, no. 6 (1992): 1146–54. http://dx.doi.org/10.1109/33.206941.
Повний текст джерелаZaera, Francisco. "The surface chemistry of thin film atomic layer deposition (ALD) processes for electronic device manufacturing." Journal of Materials Chemistry 18, no. 30 (2008): 3521. http://dx.doi.org/10.1039/b803832e.
Повний текст джерелаNagapurkar, Prashant, and Sujit Das. "Economic and embodied energy analysis of integrated circuit manufacturing processes." Sustainable Computing: Informatics and Systems 35 (September 2022): 100771. http://dx.doi.org/10.1016/j.suscom.2022.100771.
Повний текст джерелаGuo, R. S., and E. Sachs. "Modeling, optimization and control of spatial uniformity in manufacturing processes." IEEE Transactions on Semiconductor Manufacturing 6, no. 1 (1993): 41–57. http://dx.doi.org/10.1109/66.210657.
Повний текст джерелаTaehyung Lee and Chang Ouk Kim. "Statistical Comparison of Fault Detection Models for Semiconductor Manufacturing Processes." IEEE Transactions on Semiconductor Manufacturing 28, no. 1 (February 2015): 80–91. http://dx.doi.org/10.1109/tsm.2014.2378796.
Повний текст джерелаKmec, Jan, Monika Karkova, and Jan Majernik. "PLANNING MANUFACTURING PROCESSES OF SURFACE FORMING WITHIN INDUSTRY 4.0." MM Science Journal 12, no. 2018 (December 12, 2018): 2680–85. http://dx.doi.org/10.17973/mmsj.2018_12_201868.
Повний текст джерелаDatta, Madhav. "Manufacturing processes for fabrication of flip-chip micro-bumps used in microelectronic packaging: An overview." Journal of Micromanufacturing 3, no. 1 (December 17, 2019): 69–83. http://dx.doi.org/10.1177/2516598419880124.
Повний текст джерелаOutón, Jose Luis, Iván Villaverde, Héctor Herrero, Urko Esnaola, and Basilio Sierra. "Innovative Mobile Manipulator Solution for Modern Flexible Manufacturing Processes." Sensors 19, no. 24 (December 9, 2019): 5414. http://dx.doi.org/10.3390/s19245414.
Повний текст джерелаPearn, Wen-Lea, Yu-Ting Tai, Kai-Bin Huang, and Pin-Lun Ku. "Accessing Manufacturing Yield for Gamma Wafer Sawing Processes in COG Packaging." IEEE Transactions on Components, Packaging and Manufacturing Technology 1, no. 8 (August 2011): 1282–91. http://dx.doi.org/10.1109/tcpmt.2011.2134853.
Повний текст джерелаJansson, E., A. Korhonen, M. Hietala, and T. Kololuoma. "Development of a full roll-to-roll manufacturing process of through-substrate vias with stretchable substrates enabling double-sided wearable electronics." International Journal of Advanced Manufacturing Technology 111, no. 11-12 (November 6, 2020): 3017–27. http://dx.doi.org/10.1007/s00170-020-06324-4.
Повний текст джерелаTorbacki, Witold. "Analytic Method for Decision Support of Blockchain Technology Supplier Selection in Industry 4.0 Era." Multidisciplinary Aspects of Production Engineering 3, no. 1 (September 1, 2020): 296–307. http://dx.doi.org/10.2478/mape-2020-0026.
Повний текст джерелаLiu, Yang, Zhi Sheng Zhang, and Jin Fei Shi. "A Key Parameters Analysis Method of the Quality Control in the Semiconductor Multiple Manufacturing Processes Based on Functional Data Analysis Method." Advanced Materials Research 139-141 (October 2010): 1660–65. http://dx.doi.org/10.4028/www.scientific.net/amr.139-141.1660.
Повний текст джерела