Статті в журналах з теми "Electrolytic grinding Mathematical models"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Electrolytic grinding Mathematical models".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.
Chen, Fan, Bo Zhao, Xiao-feng Jia, Chong-yang Zhao, and Jing-lin Tong. "Grinding Parameter Optimization of Ultrasound-Aided Electrolytic in Process Dressing for Finishing Nanocomposite Ceramics." Mathematical Problems in Engineering 2016 (2016): 1–13. http://dx.doi.org/10.1155/2016/7896035.
Повний текст джерелаMolla, K. Z., and Alakesh Manna. "Optimization of Electrochemical Grinding Parameters for Effective Finishing of Hybrid Al/(Al2O3+ZrO2) MMC." International Journal of Surface Engineering and Interdisciplinary Materials Science 1, no. 2 (July 2013): 35–45. http://dx.doi.org/10.4018/ijseims.2013070104.
Повний текст джерелаChen, Fan, Bo Zhao, Xiaofeng Jia, and Xiaobo Wang. "Material removal rate for nanocomposite ceramics in ultrasound-aided electrolytic in process dressing." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 231, no. 21 (July 13, 2016): 3987–98. http://dx.doi.org/10.1177/0954406216659678.
Повний текст джерелаZhang, Jia-Bo, Yang Yang, Xiao-Hui Zhang, Jia-Liang Guan, Li-Yan Zheng, and Guang Li. "Experimental study on the characteristic and function of oxide film formed on grinding wheel in ELID precision grinding." Industrial Lubrication and Tribology 72, no. 5 (October 10, 2019): 549–55. http://dx.doi.org/10.1108/ilt-04-2019-0164.
Повний текст джерелаRahman, Mustafizur, A. Senthil Kumar, and I. Biswas. "A Review of Electrolytic In-Process Dressing (ELID) Grinding." Key Engineering Materials 404 (January 2009): 45–59. http://dx.doi.org/10.4028/www.scientific.net/kem.404.45.
Повний текст джерелаOvchinnikov, P. "Mathematical models for fine grinding of powders." Advanced Powder Technology 4, no. 3 (1993): 179–89. http://dx.doi.org/10.1016/s0921-8831(08)60641-x.
Повний текст джерелаLiu, Chia-Chang, and Chung-Biau Tsay. "Mathematical Models and Contact Simulations of Concave Beveloid Gears." Journal of Mechanical Design 124, no. 4 (November 26, 2002): 753–60. http://dx.doi.org/10.1115/1.1517563.
Повний текст джерелаHu, S. J., Zhi Xiong Zhou, and T. Y. Long. "Mathematical Models and Grinding Research for Step Drill." Key Engineering Materials 259-260 (March 2004): 411–14. http://dx.doi.org/10.4028/www.scientific.net/kem.259-260.411.
Повний текст джерелаWattis, Jonathan A. D. "Mathematical Models of the Homochiralisation of Crystals by Grinding." Origins of Life and Evolution of Biospheres 41, no. 2 (August 4, 2010): 133–73. http://dx.doi.org/10.1007/s11084-010-9221-2.
Повний текст джерелаKoltsova, Eleonora, Natalia Mamonova, Anna Shaneva, Michael Babkin, Nelly Popova, and Eugene Zharikov. "Modeling and Optimization of the Fabrication of Al2O3- Based Ceramocomposites Reinforced with Carbon Nanotubes." Materials Science Forum 995 (June 2020): 27–33. http://dx.doi.org/10.4028/www.scientific.net/msf.995.27.
Повний текст джерелаWang, Ze Hong, Yue Xin Han, and Bing Chen Chen. "A Mathematical Model for Predicting the Internal Parameters of Ball Mill." Advanced Materials Research 454 (January 2012): 151–56. http://dx.doi.org/10.4028/www.scientific.net/amr.454.151.
Повний текст джерелаZhang, Hong Li, and Jin Huan Zhang. "Study on Effects of Ultrasonic Vibration on Grinding Force." Applied Mechanics and Materials 532 (February 2014): 568–71. http://dx.doi.org/10.4028/www.scientific.net/amm.532.568.
Повний текст джерелаMedvedeva, Olga, Pavel Arkhipov, and Alexander Yanyushkin. "Influence of hard alloys CEDG modes on the size of dissolved layer." MATEC Web of Conferences 224 (2018): 03002. http://dx.doi.org/10.1051/matecconf/201822403002.
Повний текст джерелаHe, Lin, Xian Feng Zhao, Hong Yan Shi, and Jun Wang. "Research and Development of Four Axis Linkage Grinding Simulation System of Ball-Nose End Mill." Key Engineering Materials 443 (June 2010): 314–17. http://dx.doi.org/10.4028/www.scientific.net/kem.443.314.
Повний текст джерелаChen, Changhao, Bin Chen, Chaoqun Wu, Xinghua Gu, Xuehai Liu, and Feng Guo. "Theoretical Analysis of Grinding Wheel Deflection Angle on Peripheral Grinding Parameters and Grinding Force." Metals 12, no. 7 (July 17, 2022): 1209. http://dx.doi.org/10.3390/met12071209.
Повний текст джерелаQiu, Jian, Ya Dong Gong, Jun Cheng, and Yue Ming Liu. "Thermal Simulation of Peel Grinding Process." Applied Mechanics and Materials 16-19 (October 2009): 590–95. http://dx.doi.org/10.4028/www.scientific.net/amm.16-19.590.
Повний текст джерелаYin, Shao Hui, Jing Wang, Feng Jun Chen, Jian Wu Yu, Yu Wang, Qing Liang Zhao, and Hong Liang Li. "Inclined Axis Ultra-Precision Grinding for Spherical Surface." Solid State Phenomena 175 (June 2011): 145–49. http://dx.doi.org/10.4028/www.scientific.net/ssp.175.145.
Повний текст джерелаLi, Ting, and CunYun Pan. "Mathematical models of grinding manufacture and tooth contact analysis of spherical gears." Science in China Series E: Technological Sciences 52, no. 10 (September 12, 2009): 2823–30. http://dx.doi.org/10.1007/s11431-009-0232-z.
Повний текст джерелаLacey, S. J. "Vibration Monitoring of the Internal Centreless Grinding Process Part 1: Mathematical Models." Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture 204, no. 2 (May 1990): 119–28. http://dx.doi.org/10.1243/pime_proc_1990_204_055_02.
Повний текст джерелаArtikov, A., L. Akobirova, and Z. Akbarhodjaev. "SYSTEMS THINKING IN JAW CRUSHER ANALYSIS." Technical science and innovation 2020, no. 2 (July 23, 2020): 19–26. http://dx.doi.org/10.51346/tstu-01.20.2-77-0059.
Повний текст джерелаTyshkevich, V. N., V. A. Nosenko, A. V. Sarazov, and S. V. Orlov. "ELASTIC DEFORMATIONS DURING FLAT GRINDING OF LOW-RIGIDITY PRISMATIC WORKPIECES." IZVESTIA VOLGOGRAD STATE TECHNICAL UNIVERSITY, no. 8(255) (August 31, 2021): 42–46. http://dx.doi.org/10.35211/1990-5297-2021-8-255-42-46.
Повний текст джерелаWang, Huiliang, Xiaozhong Deng, Jianhai Han, Jubo Li, and Jianjun Yang. "Mathematical Model of Helical Gear Topography Measurements and Tooth Flank Errors Separation." Mathematical Problems in Engineering 2015 (2015): 1–10. http://dx.doi.org/10.1155/2015/176237.
Повний текст джерелаJiang, Jing Liang, Pei Qi Ge, Ying Zhang, and De Xiang Wang. "A Mathematical Model of Single Grain Forces in Grinding Process." Applied Mechanics and Materials 229-231 (November 2012): 1904–7. http://dx.doi.org/10.4028/www.scientific.net/amm.229-231.1904.
Повний текст джерелаXu, Li Ming, Yu Jue Wang, and De Jin Hu. "Quantitative Analysis and Evaluation of Valve Core Spherical Surface Grinding Texture." Key Engineering Materials 693 (May 2016): 1279–85. http://dx.doi.org/10.4028/www.scientific.net/kem.693.1279.
Повний текст джерелаLin, C., S. K. Kang, and K. F. Ehmann. "Helical Micro-Drill Point Design and Grinding." Journal of Engineering for Industry 117, no. 3 (August 1, 1995): 277–87. http://dx.doi.org/10.1115/1.2804332.
Повний текст джерелаTyshkevich, Vladimir N., Alexander V. Sarazov, and Sergey V. Orlov. "Algorithm of Determination of Optimal Conditions for Low-Rigidity Prismatic Workpieces Flat Grinding." Key Engineering Materials 910 (February 15, 2022): 138–43. http://dx.doi.org/10.4028/p-9542bg.
Повний текст джерелаTyshkevich, V. N., V. A. Nosenko, A. V. Sarazov, and S. V. Orlov. "Selecting Optimal Conditions for Flat Grinding Linear Bearings Guides of Low Rigidity." Proceedings of Higher Educational Institutions. Маchine Building, no. 7 (736) (July 2021): 30–39. http://dx.doi.org/10.18698/0536-1044-2021-7-30-39.
Повний текст джерелаChen, Feng Jun, Shao Hui Yin, and S. J. Hu. "Modeling and Computer Simulation of Grinding for Ball-End Milling Cutter with Equal Normal Rake Angle." Advanced Materials Research 53-54 (July 2008): 225–30. http://dx.doi.org/10.4028/www.scientific.net/amr.53-54.225.
Повний текст джерелаTopilnytskyy, Volodymyr, and Dariya Rebot. "DEVELOPMENT OF A MATHEMATICAL MODEL FOR THE RESEARCH OF THE DYNAMICS OF VIBRATION MILL WITH TWO DRIVES FOR BULK MATERIALS FINE GRINDING." Vibrations in engineering and technology, no. 1(100) (March 23, 2021): 89–99. http://dx.doi.org/10.37128/2306-8744-2021-1-9.
Повний текст джерелаKalchenko, V. V., V. I. Kalchenko, S. D. Tsybulya, A. V. Kolohoida, and Ye Yu Sakhno. "Simulation of the process of milling and grinding cylindrical surfaces by an oriented tool in one setup." Naukovyi Visnyk Natsionalnoho Hirnychoho Universytetu, no. 4 (August 30, 2022): 66–70. http://dx.doi.org/10.33271/nvngu/2022-4/066.
Повний текст джерелаSmirnov, Georgi V. "Grinding with classification via geometric partition models." Journal of Physics A: Mathematical and Theoretical 40, no. 30 (July 12, 2007): 8751–63. http://dx.doi.org/10.1088/1751-8113/40/30/010.
Повний текст джерелаJiang, Xiao Hong, Ping Ye, and Zong Kai Li. "Analysis of Grinding Roller Stress Distribution of Vertical Roller Mill." Advanced Materials Research 936 (June 2014): 1862–67. http://dx.doi.org/10.4028/www.scientific.net/amr.936.1862.
Повний текст джерелаFrivaldsky, Michal, Michal Pridala, and Peter Drgona. "Implementation of mathematical model of thermal behavior of electronic components for lifetime estimation based on multi-level simulation." Archives of Electrical Engineering 66, no. 2 (June 27, 2017): 339–50. http://dx.doi.org/10.1515/aee-2017-0025.
Повний текст джерелаVekteris, Vladas. "The Use of Mechatronics for the Improvement of Grinding Accuracy." Solid State Phenomena 113 (June 2006): 137–42. http://dx.doi.org/10.4028/www.scientific.net/ssp.113.137.
Повний текст джерелаKalchenko, Volodymyr, Vitalіі Kalchenko, Antonina Kolohoida, Andrii Yeroshenko, and Dmytro Kalchenko. "Building a model of dressing the working surfaces of wheels during the two-side grinding of round end faces at CNC machines." Eastern-European Journal of Enterprise Technologies 1, no. 1 (115) (February 24, 2022): 86–93. http://dx.doi.org/10.15587/1729-4061.2022.252642.
Повний текст джерелаLee, Yi Hui, Shih Syun Lin, and Yi Pei Shih. "Probe Position Planning for Measuring Cylindrical Gears on a Four-Axis CNC Machine." Advanced Materials Research 579 (October 2012): 297–311. http://dx.doi.org/10.4028/www.scientific.net/amr.579.297.
Повний текст джерелаRahman, M. M., and K. Kadirgama. "Performance of Water-Based Zinc Oxide Nanoparticle Coolant during Abrasive Grinding of Ductile Cast Iron." Journal of Nanoparticles 2014 (March 5, 2014): 1–7. http://dx.doi.org/10.1155/2014/175896.
Повний текст джерелаNaumova, Yu A., and I. V. Gordeeva. "Analysis of mathematical models for description of the fractional composition of disperse elastic fillers." Russian Technological Journal 7, no. 5 (October 15, 2019): 62–78. http://dx.doi.org/10.32362/2500-316x-2019-7-5-62-78.
Повний текст джерелаFu, Pei, Jiang Huang, Ming Zhong Jin, Min Qing Gong, and Xue Ni Pan. "Grinding Spindle Improvement Based on Structure Optimal Design." Applied Mechanics and Materials 454 (October 2013): 118–22. http://dx.doi.org/10.4028/www.scientific.net/amm.454.118.
Повний текст джерелаBratan, Sergey, Stanislav Roshchupkin, Anastasia Chasovitina, and Kapil Gupta. "The effect of the relative vibrations of the abrasive tool and the workpiece on the probability of material removing during finishing grinding." Metal Working and Material Science 24, no. 1 (March 15, 2022): 33–47. http://dx.doi.org/10.17212/1994-6309-2022-24.1-33-47.
Повний текст джерелаBratan, Sergey, Stanislav Roshchupkin, Alexander Kharchenko, and Anastasia Chasovitina. "Probabilistic model of surface layer removal when grinding brittle non-metallic materials." Metal Working and Material Science 23, no. 2 (June 10, 2021): 6–16. http://dx.doi.org/10.17212/1994-6309-2021-23.2-6-16.
Повний текст джерелаMazzinghy, Douglas Batista, José Guilherme de Abreu Valadares, Roberto Galéry, Luiz Cláudio Monteiro Montenegro, and Antônio Eduardo Clark Peres. "Simulation of a ball mill operating with a low ball charge level and a balanced ball size distribution." Rem: Revista Escola de Minas 66, no. 4 (December 2013): 473–77. http://dx.doi.org/10.1590/s0370-44672013000400011.
Повний текст джерелаChen, W.-F. "A mathematical solution to the design and manufacturing problems of ball-end cutters having a cutting edge with constant angle to the axis." Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science 218, no. 3 (March 1, 2004): 301–8. http://dx.doi.org/10.1243/095440604322900426.
Повний текст джерелаChistova, Natal'ya Geral'dovna, Venera Nurullovna Matygulina, and Yuri Davydovich Alashkevich. "PREPARATION OF WOOD FIBER SEMI-FINISHED PRODUCTS IN KNIFE MACHINES OF VARIOUS MODIFICA-TION." chemistry of plant raw material, no. 4 (December 21, 2020): 459–66. http://dx.doi.org/10.14258/jcprm.2020048189.
Повний текст джерелаDorokhov, Aleksey, Victor Khamyev, and Kirill Lepeshkin. "Modernization of grinding machines of grain cleaning machines." MATEC Web of Conferences 224 (2018): 05009. http://dx.doi.org/10.1051/matecconf/201822405009.
Повний текст джерелаNguyen, Tuan-Linh, Nhu-Tung Nguyen, and Long Hoang. "A study on the vibrations in the external cylindrical grinding process of the alloy steels." International Journal of Modern Physics B 34, no. 22n24 (August 14, 2020): 2040150. http://dx.doi.org/10.1142/s0217979220401505.
Повний текст джерелаÇAYDAŞ, ULAŞ, and MAHMUT ÇELİK. "GENETIC ALGORITHM-BASED OPTIMIZATION FOR SURFACE ROUGHNESS IN CYLINDRICALLY GRINDING PROCESS USING HELICALLY GROOVED WHEELS." Surface Review and Letters 24, Supp02 (November 2017): 1850031. http://dx.doi.org/10.1142/s0218625x18500312.
Повний текст джерелаSorsa, Aki, Mika Ruusunen, Suvi Santa-aho, and Minnamari Vippola. "Sub-Surface Analysis of Grinding Burns with Barkhausen Noise Measurements." Materials 16, no. 1 (December 24, 2022): 159. http://dx.doi.org/10.3390/ma16010159.
Повний текст джерелаMarchenko, R. A., S. V. Yarovoy, and V. I. Shurkina. "Information system for calculating paper-forming indicators of fibrous semi-finished products based on regression models." Journal of Physics: Conference Series 2094, no. 3 (November 1, 2021): 032059. http://dx.doi.org/10.1088/1742-6596/2094/3/032059.
Повний текст джерелаZheng, Jian Xin, and Jia Wen Xu. "Basic Experimental Research on the NC-Contour Evolution Ultrasonic Assisted Grinding Ceramic Blade Surface." Key Engineering Materials 359-360 (November 2007): 369–273. http://dx.doi.org/10.4028/www.scientific.net/kem.359-360.369.
Повний текст джерела