Добірка наукової літератури з теми "Electro-Catalyst"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "Electro-Catalyst".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "Electro-Catalyst"
Honorato, Ana Maria Borges, Mohmmad Khalid, Antonio Aprigio da Silva Curvelo, Hamilton Varela, and Samaneh Shahgaldi. "Trimetallic Nanoalloy of NiFeCo Embedded in Phosphidated Nitrogen Doped Carbon Catalyst for Efficient Electro-Oxidation of Kraft Lignin." Polymers 14, no. 18 (September 9, 2022): 3781. http://dx.doi.org/10.3390/polym14183781.
Повний текст джерелаLindgren, Mikaela, and Itai Panas. "Confinement dependence of electro-catalysts for hydrogen evolution from water splitting." Beilstein Journal of Nanotechnology 5 (February 24, 2014): 195–201. http://dx.doi.org/10.3762/bjnano.5.21.
Повний текст джерелаBounab, Loubna, Olalla Iglesias, Elisa González-Romero, Marta Pazos, and M. Ángeles Sanromán. "Effective heterogeneous electro-Fenton process of m-cresol with iron loaded actived carbon." RSC Advances 5, no. 39 (2015): 31049–56. http://dx.doi.org/10.1039/c5ra03050a.
Повний текст джерелаBaronia, Richa, Jyoti Goel, and Sunil Kumar Singhal. "Synthesis and Characterization of PtCo Alloy Nanoparticles Supported on a Reduced Graphene Oxide/g-C3N4 Composite for Efficient Methanol Electro-Oxidation." Journal of Nanoscience and Nanotechnology 21, no. 3 (March 1, 2021): 1721–27. http://dx.doi.org/10.1166/jnn.2021.18992.
Повний текст джерелаNouralishahi, Amideddin, Ali Morad Rashidi, Yadollah Mortazavi, Abbas Ali Khodadadi, and Mohammadmehdi Choolaei. "Enhanced methanol electro-oxidation reaction on Pt-CoOx/MWCNTs hybrid electro-catalyst." Applied Surface Science 335 (April 2015): 55–64. http://dx.doi.org/10.1016/j.apsusc.2015.02.011.
Повний текст джерелаZhou, Yang, Chen Li, Junxiang Fu, Changlin Yu, and Xian-Chao Hu. "Nitrogen-doped graphene/tungsten oxide microspheres as an electro-catalyst support for formic acid electro-oxidation." RSC Advances 6, no. 95 (2016): 92852–56. http://dx.doi.org/10.1039/c6ra17344f.
Повний текст джерелаFernández de Dios, Maria Ángeles, Olaia Iglesias, Marta Pazos, and Maria Ángeles Sanromán. "Application of Electro-Fenton Technology to Remediation of Polluted Effluents by Self-Sustaining Process." Scientific World Journal 2014 (2014): 1–8. http://dx.doi.org/10.1155/2014/801870.
Повний текст джерелаWang, Guang Ying, Li Fang, Fei Fei Li, and Surin Saipanya. "Methanol Electro-Oxidation Using RuRh@Pt/C." Advanced Materials Research 953-954 (June 2014): 1297–302. http://dx.doi.org/10.4028/www.scientific.net/amr.953-954.1297.
Повний текст джерелаAbdellaoui, Sofiene, David P. Hickey, Andrew R. Stephens, and Shelley D. Minteer. "Recombinant oxalate decarboxylase: enhancement of a hybrid catalytic cascade for the complete electro-oxidation of glycerol." Chemical Communications 51, no. 76 (2015): 14330–33. http://dx.doi.org/10.1039/c5cc06131h.
Повний текст джерелаKumar, Ratanesh, Pratap Baburao Wagh, Sanjay Vishwasrao Ingale, and K. D. Joshi. "Degradation of Mononitrotoluene by Electrochemical Method." Defence Science Journal 71, no. 4 (July 1, 2021): 456–61. http://dx.doi.org/10.14429/dsj.71.16376.
Повний текст джерелаДисертації з теми "Electro-Catalyst"
Jungius, Hugo. "Model inverse electro-catalyst investigations of metal support interactions." Thesis, University of Southampton, 2017. https://eprints.soton.ac.uk/413849/.
Повний текст джерелаJalil, Pour Kivi Soghra. "The Effect of Metal Solution Contaminants on the Electro-catalyst Activities of Direct Methanol Fuel Cell." Thesis, Université d'Ottawa / University of Ottawa, 2019. http://hdl.handle.net/10393/38807.
Повний текст джерелаBYSTRÖM, MARCUS. "Anchoring a Molecular Iron Based Water Oxidation Catalyst onto a Carbon Paste Electrode." Thesis, KTH, Skolan för kemivetenskap (CHE), 2015. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-172212.
Повний текст джерелаDet här arbetet berör studien och utvecklingen utav järnbaserade katalysatorer, speciellt framtagna för för delning utav vatten. Utöver detta undersöks även om dessa katalysatorer (WOCs) kan immobiliseras på den hydrofoba ytan hos elektroder gjorda på kol-pasta. I det inledande kapitlet ges en generell bakgrund till området som berör delning utav vatten. I det andra kapitlet presenteras det experimentella utförandet utav synteser samt elektrokemiska mätningar som berörts under arbetets gång i jakten på en komplexdopad elektrod. I det tredje kapitlet diskuteras resultaten från mätningarna samt möjliga framtidsutsikter. I det fjärde kapitlet presenteras slutsatserna utav studien.
Petrik, Leslie F. "Pt Nanophase supported catalysts and electrode systems for water electrolysis." Thesis, University of the Western Cape, 2008. http://hdl.handle.net/11394/2743.
Повний текст джерелаIn this study novel composite electrodes were developed, in which the catalytic components were deposited in nanoparticulate form. The efficiency of the nanophase catalysts and membrane electrodes were tested in an important electrocatalytic process, namely hydrogen production by water electrolysis, for renewable energy systems. The activity of electrocatalytic nanostructured electrodes for hydrogen production by water electrolysis were compared with that of more conventional electrodes. Development of the methodology of preparing nanophase materials in a rapid, efficient and simple manner was investigated for potential application at industrial scale. Comparisons with industry standards were performed and electrodes with incorporated nanophases were characterized and evaluated for activity and durability.
South Africa
Estejab, Ali. "Mathematical and Molecular Modeling of Ammonia Electrolysis with Experimental Validation." Ohio University / OhioLINK, 2018. http://rave.ohiolink.edu/etdc/view?acc_num=ohiou1514834805432007.
Повний текст джерелаBonnin, Egilda Purusha. "Electrolysis of Ammonia Effluents: A Remediation Process with Co-generation of Hydrogen." Ohio : Ohio University, 2006. http://www.ohiolink.edu/etd/view.cgi?ohiou1156435340.
Повний текст джерелаCaliman, Cristiano Carrareto. "Estudo da eletro-oxidação de álcoois em catalisadores do tipo PtSnNiTi para aplicação em células a combustível." Universidade Federal do Espírito Santo, 2013. http://repositorio.ufes.br/handle/10/6746.
Повний текст джерелаCoordenação de Aperfeiçoamento de Pessoal de Nível Superior
Electrocatalysts of type C/PtSnNiTi were prepared by thermal decomposition of polymeric precursors. The physico-chemical and electrochemical characterization of the electrocatalysts was performed by different techniques: X-ray diffraction, transmission electron microscopy, cyclic voltammetry and chronoamperometry. The X-ray diffraction results showed that the electrocatalysts comprise mainly Pt metal with face-centered cubic crystal structure and particle sizes ranging from 1.8 to 8.3 nm. In transmission electron microscopy analysis the average particle sizes observed were between 4 and 6 nm. The electrocatalysts were evaluated in the absence and presence of ethanol and glycerol in sulfuric acid medium. All showed activity towards alcohols oxidation. Furthermore, the Pt50Sn20Ni25Ti5 electrocatalyst showed the best results of cyclic voltammetry and chronoamperometry in presence of glycerol and ethanol respectively. The greater potency density obtained in cell tests was 20 mW/cm2 for the composition Pt50Sn20Ni25Ti5. Cyclic voltammetry data obtained in this study indicate that the addition of Ni and Ti in PtSn electrocatalysts increases its electrocatalytic activity toward alcohols oxidation
Eletrocatalisadores do tipo C/PtSnNiTi foram preparados por decomposição térmica dos precursores poliméricos. As caracterizações físico-química e eletroquímica foram feitas por diferentes técnicas: Difração de raios X, Microscopia eletrônica de transmissão, Voltametria cíclica, Cronoamperometria, Teste de célula e Teste de energia de ativação. Os resultados de difração de raios X mostraram que os catalisadores são principalmente compostos por Platina cúbica de face centrada e com tamanhos de partícula variando de 1,8 a 8,3 nm. Nas análises de microscopia eletrônica de transmissão foram observados tamanhos médios de partícula entre 4 e 6 nm. Os eletrocatalisadores foram avaliados na presença e ausência de etanol e glicerol em ácido sulfúrico. Todos mostraram atividade na oxidação dos álcoois. Além disso, a composição Pt50Sn20Ni25Ti5 apresentou os melhores resultados de voltametria cíclica e cronoamperometria na presença de glicerol e etanol. A maior densidade de potência obtida nos testes de célula foi de 20 mW/cm2 para a composição Pt50Sn20Ni25Ti5. De modo geral, os dados de voltametria cíclica obtidos nesse estudo indicam que a adição de Ni e Ti em catalisadores PtSn aumenta a atividade catalítica destes frente a oxidação de álcoois
Vafaee, Maedeh. "Conception, développement et caractérisation des fibres spécifiques activées (composite nanoweb) pour le traitement des rejets de l'industrie textile." Thesis, Mulhouse, 2019. http://www.theses.fr/2019MULH3062.
Повний текст джерелаIn this research, at first, a new catalyst was synthesized by a new combustion method and it was also characterized and applied in a photo-catalytic reactor to degrade the organic compounds. Then, these photocatalysts were immobilized on the surface of nonwovens of polyamide nano fibers obtained by the electro-spinning process using a semi-industrial machine. Then, the mechanical behaviors of polyamide (PA) nano-fiber nonwovens were studied in the short and long term by tensile and creep test. This allowed on the one hand to evaluate finely the properties of nonwovens and on the other hand to model their behavior on average of analog models. The generalized Kelvin-Voigt model has shown its robustness. They were installed on the reactor wall in order to have a stainless steel fixed bed reactor and to avoid the disadvantages of a heterogencous system. The solution analysis results showed us a favorable degradation of organic compounds and intermediate products in a closed circulation system. Pressurizing the reactor confirmed, as shown in the mechanical tests, that the mechanical properties of the doped fibers were sufficient to withstand the mechanical stresses associated with the flow of the Jiquid
Khanduyeva, Natalya. "Conjugated Polymer Brushes (Poly(3-hexylthiophene) brushes): new electro- and photo-active molecular architectures." Doctoral thesis, Saechsische Landesbibliothek- Staats- und Universitaetsbibliothek Dresden, 2009. http://nbn-resolving.de/urn:nbn:de:bsz:14-ds-1232556562686-70575.
Повний текст джерелаKhanduyeva, Natalya. "Conjugated Polymer Brushes (Poly(3-hexylthiophene) brushes): new electro- and photo-active molecular architectures." Doctoral thesis, Technische Universität Dresden, 2008. https://tud.qucosa.de/id/qucosa%3A23635.
Повний текст джерелаЧастини книг з теми "Electro-Catalyst"
Kamlesh, Satya Prakash, Deepika Tavar, Pankaj Raizda, Pradeep Singh, Manish Mudgal, A. K. Srivastava, and Archana Singh. "Design of Porous Carbon-Based Electro-Catalyst for Hydrogen Generation." In Materials Horizons: From Nature to Nanomaterials, 285–322. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-19-7188-4_11.
Повний текст джерелаRajan, Rahul, Anagha Yatheendran, and N. Sandhyarani. "Palladium@Copper Tungstate: A Non-corrosive and Methanol Tolerant Electro-Catalyst Towards Oxygen Reduction Reaction." In Lecture Notes in Mechanical Engineering, 103–16. Singapore: Springer Nature Singapore, 2023. http://dx.doi.org/10.1007/978-981-99-3386-0_9.
Повний текст джерелаWang, Jenshi B., Charng-Ching Yeh, and Han-Chang Gao. "A New Carbon Nanotube-Supported Pt–Ru Anodic Catalyst by Reverse Microemulsion for Direct Methanol Electro-oxidation." In Progress in Exergy, Energy, and the Environment, 937–42. Cham: Springer International Publishing, 2014. http://dx.doi.org/10.1007/978-3-319-04681-5_89.
Повний текст джерелаYano, Junko, Vittal K. Yachandra, Matthew W. Kanan, Yogesh Surendranath, Mirca Dinca, and Daniel G. Nocera. "An Artificial Water-Oxidizing Co Electro-Catalyst: Structure and Mechanism by in Situ X-Ray Absorption Spectroscopy." In Advanced Topics in Science and Technology in China, 266–68. Berlin, Heidelberg: Springer Berlin Heidelberg, 2013. http://dx.doi.org/10.1007/978-3-642-32034-7_55.
Повний текст джерелаWang, Z., L. Shi, G. Gou, A. Fan, C. Xu, and L. Zhang. "Pt/C catalyst for methanol electro-oxidation and oxygen electro-reduction in DMFC." In Advanced Materials and Structural Engineering, 167–70. CRC Press, 2016. http://dx.doi.org/10.1201/b20958-37.
Повний текст джерелаCruz-Navarro, Jesús Antonio, Luis Humberto Mendoza-Huizar, Verónica Salazar-Pereda, Jose Ángel Cobos-Murcia, Fabiola Hernandez-García, and Giaan A. Álvarez-Romero. "Metal-Organic Frameworks and their Derived Structures as Catalysts for Electrochemical Sensors." In Advanced Catalysts Based on Metal-organic Frameworks (Part 2), 192–215. BENTHAM SCIENCE PUBLISHERS, 2023. http://dx.doi.org/10.2174/9789815136029123010008.
Повний текст джерелаRajangam, Padmavathi. "Hydrogen Fuel Cells as Green Energy." In Cases on Green Energy and Sustainable Development, 291–323. IGI Global, 2020. http://dx.doi.org/10.4018/978-1-5225-8559-6.ch011.
Повний текст джерелаRajangam, Padmavathi. "Hydrogen Fuel Cells as Green Energy." In Research Anthology on Clean Energy Management and Solutions, 769–95. IGI Global, 2021. http://dx.doi.org/10.4018/978-1-7998-9152-9.ch032.
Повний текст джерелаТези доповідей конференцій з теми "Electro-Catalyst"
Khaerudini, Deni Shidqi, Hanifah Winarto, Andri Hardiansyah, Sagir Alva, Deni Shidqi Khaerudini, Cecep E. Rustana, Denawati Junia, and Fharuq Dirza Dirgantara. "New and Renewable Catalyst Based on Electro-Activated Carbon for Hydrogen Generation." In 2019 International Conference on Technologies and Policies in Electric Power & Energy. IEEE, 2019. http://dx.doi.org/10.1109/ieeeconf48524.2019.9102628.
Повний текст джерелаDas, Dipanwita, Vrushali Raut, Kota V. M. K. Kireeti, and Neetu Jha. "Non-platinum metal-organic framework based electro-catalyst for promoting oxygen reduction reaction." In DAE SOLID STATE PHYSICS SYMPOSIUM 2017. Author(s), 2018. http://dx.doi.org/10.1063/1.5029180.
Повний текст джерелаNyamdavaa, E., P. Altantsog, E. Uyanga, B. Bumaa, T. Y. Chen, C. H. Lee, G. Sevjidsuren, and D. Sangaa. "Crystal structure study of Perovskite-type LaCoO3 electro-catalyst synthesized by Pechini method." In 2011 6th International Forum on Strategic Technology (IFOST). IEEE, 2011. http://dx.doi.org/10.1109/ifost.2011.6020966.
Повний текст джерелаdos Santos Correa, Patricia, Elen Leal da Silva, Stephanie Cardoso de Sa, Claudio Radtke, Ester Schmidt Rieder, and Celia de Fraga Malfatti. "Catalyst based on Pt, Sn and Ni: Effect of carbon functionalization on ethanol electro-oxidation." In 2012 IEEE 12th International Conference on Nanotechnology (IEEE-NANO). IEEE, 2012. http://dx.doi.org/10.1109/nano.2012.6322233.
Повний текст джерелаHussein, Nur Farah Mohamed, Che Zulzikrami Azner Abidin, Fahmi Muhammad Ridwan, Siti Nasuha Sabri, and Nur Aqilah Razali. "Comparative study on palm oil mill effluent (POME) treatment by electro-oxidation using catalyst and electrode." In INTERNATIONAL SYMPOSIUM ON GREEN AND SUSTAINABLE TECHNOLOGY (ISGST2019). AIP Publishing, 2019. http://dx.doi.org/10.1063/1.5126553.
Повний текст джерелаBanville, M., R. Labrecque, and J. M. Lavoie. "Dry reforming of methane under an electro-catalytic bed: effect of electrical current and catalyst composition." In ENERGY AND SUSTAINABILITY 2014. Southampton, UK: WIT Press, 2014. http://dx.doi.org/10.2495/esus140531.
Повний текст джерелаReinecke, Ernst-Arndt, Peter Broeckerhoff, and Inga M. Tragsdorf. "Investigations on Catalyst Systems for Catalytic Recombiners." In 10th International Conference on Nuclear Engineering. ASMEDC, 2002. http://dx.doi.org/10.1115/icone10-22515.
Повний текст джерелаHyland, Patrick, Jungmin Lee, Chien Shung Lin, Jeongmin Ahn, and Paul D. Ronney. "Effect of Ammonia Treatment on Pt Catalyst Used for Low-Temperature Reaction." In ASME 2007 International Mechanical Engineering Congress and Exposition. ASMEDC, 2007. http://dx.doi.org/10.1115/imece2007-42040.
Повний текст джерелаWan, Chieh-Hao, and Jyun-Ming Wei. "Suppression of Methanol Crossover for Direct Methanol Fuel Cells Using a Layer of Nanometer-Sized Pt50-Sn50 Catalyst Particles Deposited on Proton Exchange Membrane Surface." In ASME 2009 7th International Conference on Fuel Cell Science, Engineering and Technology. ASMEDC, 2009. http://dx.doi.org/10.1115/fuelcell2009-85137.
Повний текст джерелаBaschuk, Jeffrey J., and Xianguo Li. "Modelling and Simulation of PEM Fuel Cells With CO Poisoning." In ASME 2002 Engineering Technology Conference on Energy. ASMEDC, 2002. http://dx.doi.org/10.1115/etce2002/cae-29012.
Повний текст джерелаЗвіти організацій з теми "Electro-Catalyst"
Bianco, Stephen G. Micro-Electro-Mechanical Systems: A Catalyst for Army Transformation. Fort Belvoir, VA: Defense Technical Information Center, April 2001. http://dx.doi.org/10.21236/ada394499.
Повний текст джерела