Увійти

Готові списки джерел за темами / Elasto-plastic plates / Статті в журналах

Статті в журналах з теми "Elasto-plastic plates"

Щоб переглянути інші типи публікацій з цієї теми, перейдіть за посиланням: Elasto-plastic plates.

Автор: Grafiati

Опубліковано: 14 березня 2023

Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями

Оберіть тип джерела:

Ознайомтеся з топ-50 статей у журналах для дослідження на тему "Elasto-plastic plates".

Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.

Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.

Переглядайте статті в журналах для різних дисциплін та оформлюйте правильно вашу бібліографію.

1

Papadopoulos, Panayiotis, and Robert L. Taylor. "Elasto-Plastic Analysis of Reissner-Mindlin Plates." Applied Mechanics Reviews 43, no. 5S (May 1, 1990): S40—S50. http://dx.doi.org/10.1115/1.3120846.

Повний текст джерела

Анотація:

A finite element analysis of elasto-plastic Reissner-Mindlin plates is presented. The discrete field equations are derived from a nonlinear version of the Hu-Washizu variational principle. Associative plasticity, including linear hardening, is employed by means of a generalized von Mises-type yield function. A predictor/corrector scheme is used to integrate the plastic constitutive rate equations. Numerical simulations are conducted for a series of test problems to illustrate performance of the formulation.

Стилі APA, Harvard, Vancouver, ISO та ін.

2

Kutt, Lembit M., and Maciej P. Bieniek. "Elasto‐Plastic Constitutive Equations of Stiffened Plates." Journal of Engineering Mechanics 114, no. 4 (November 1988): 656–70. http://dx.doi.org/10.1061/(asce)0733-9399(1988)114:4(656).

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

3

Çelik, Mehmet. "Elasto-plastic behavior of isotropic stepped plates." Engineering Analysis with Boundary Elements 25, no. 6 (June 2001): 455–60. http://dx.doi.org/10.1016/s0955-7997(01)00039-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

4

Yankelevsky, David Z. "Elasto-plastic blast response of rectangular plates." International Journal of Impact Engineering 3, no. 2 (January 1985): 107–19. http://dx.doi.org/10.1016/0734-743x(85)90029-6.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

5

Tian, Yan-ping, and Yi-ming Fu. "Elasto-plastic postbuckling of damaged orthotropic plates." Applied Mathematics and Mechanics 29, no. 7 (July 2008): 841–53. http://dx.doi.org/10.1007/s10483-008-0702-y.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

6

Chang, Wan-Shu, T. Krauthammer, and E. Ventsel. "Elasto-Plastic Analysis of Corrugated-Core Sandwich Plates." Mechanics of Advanced Materials and Structures 13, no. 2 (March 2006): 151–60. http://dx.doi.org/10.1080/15376490500451767.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

7

Zhu, Bao, and Yingjian Cai. "Particle Size-Dependent Responses of Metal–Ceramic Functionally Graded Plates Under Low-Velocity Impact." International Journal of Applied Mechanics 10, no. 05 (June 2018): 1850056. http://dx.doi.org/10.1142/s1758825118500564.

Повний текст джерела

Анотація:

The analysis of impact response for metal–ceramic functionally graded materials is important for the design of advanced impact resistance structures in aerospace, nuclear and mechanical industries. Here, we propose a dislocation-based continuum model to analyze elasto-plastic deformation of metal–ceramic functionally graded plates under low-velocity impact. The dislocation-based continuum model explicitly accounts for strengthening effects due to geometrically necessary dislocations and plastic strain gradient in impact analysis of metal–ceramic functionally graded plates by combining Taylor dislocation model and Tamura–Tomota–Ozowa (TTO) model. In the dislocation-based model, we describe the effective linear elastic properties of the metal–ceramic functionally graded plates based on the Mori–Tanaka scheme. We show from finite element simulations that particle-size-dependent elasto-plastic properties play important roles in determining the impact behavior of metal–ceramic functionally graded plates and provide a good prediction of diameters of after-impact impression compared to experiments on SiC/Al functionally graded circular plates.

Стилі APA, Harvard, Vancouver, ISO та ін.

8

Mars, Jamel, Lotfi Ben Said, Mondher Wali, and Fakhreddine Dammak. "Elasto-Plastic Modeling of Low-Velocity Impact on Functionally Graded Circular Plates." International Journal of Applied Mechanics 10, no. 04 (May 2018): 1850038. http://dx.doi.org/10.1142/s1758825118500382.

Повний текст джерела

Анотація:

Low-velocity impact of elasto-plastic functionally graded material (FGM) plates is first investigated in this paper based on Mori–Tanaka model to underline micromechanics and locally determine the effective FGM properties and self-consistent method of Suquet for the homogenization of the stress-field. The elasto-plastic behavior of the particle reinforced metal matrix FGM plate is assumed to follow Ludwik hardening law. An incremental formulation of the elasto-plastic constitutive relation is developed to predict the tangent operator. The homogenization formulation and numerical algorithms are implemented into ABAQUS/Standard via a user material subroutine (UMAT) and USDFLD subroutine. The effect of the power-law index on low-velocity impact parameters like contact force, deflection, permanent indentation, velocity distribution and the kinetic energy are examined using the proposed method. With the aim of demonstrating the accuracy and efficiency of the present method, current numerical results are compared to experimental and theoretical results from the literature and show very good agreement.

Стилі APA, Harvard, Vancouver, ISO та ін.

9

Arslan, Nurettin, and Mehmet Çelik. "Thermoplastic Matrix Plates in Elasto-Plastic Finite Element Analysis." Journal of Reinforced Plastics and Composites 20, no. 14 (September 15, 2001): 1191–204. http://dx.doi.org/10.1177/073168401772679156.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

10

Arslan, Nurettin, and Mehmet Çelik. "Thermoplastic Matrix Plates in Elasto-Plastic Finite Element Analysis." Journal of Reinforced Plastics and Composites 20, no. 14-15 (September 2001): 1191–204. http://dx.doi.org/10.1106/6e0j-fk70-a7j4-hgln.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

11

Guedes Soares, C., J. M. Gordo, and A. P. Teixeira. "Elasto-plastic Behaviour of Plates Subjected to Heat Loads." Journal of Constructional Steel Research 45, no. 2 (February 1998): 179–98. http://dx.doi.org/10.1016/s0143-974x(97)00062-x.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

12

El-Sawy, Khaled M., Aly S. Nazmy, and Mohammad Ikbal Martini. "Elasto-plastic buckling of perforated plates under uniaxial compression." Thin-Walled Structures 42, no. 8 (August 2004): 1083–101. http://dx.doi.org/10.1016/j.tws.2004.03.002.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

13

Jang, Chang Doo, and Seung II Seo. "A Study on the Prediction of Deformations of Plates Due to Line Heating Using a Simplified Thermal Elasto-Plastic Analysis." Journal of Ship Production 13, no. 01 (February 1, 1997): 22–27. http://dx.doi.org/10.5957/jsp.1997.13.1.22.

Повний текст джерела

Анотація:

The line heating process has long been used in plate forming of hull surfaces and it has depended on skillful workers. Since reduction of production cost is a major concern of shipbuilding companies, line heating work must be improved for higher productivity. In this paper, as a first step to automatic hull forming, a method is proposed to predict deformations due to line heating. It includes a simplified thermal elasto-plastic analysis to increase computing efficiency and to enable real-time visualization of deformed shapes. The simplified thermal elasto-plastic analysis method shortens the thermal elasto-plastic process and introduces inherent strains. Predicted deformations for line heated plates show good agreement with experimental results. For the prediction of deformation, a method to estimate heat flux of the torch is also introduced. The proposed method can be used in control and simulation of the line heating process with simplicity and efficiency.

Стилі APA, Harvard, Vancouver, ISO та ін.

14

Bich, Dao Huy. "Elasto-plastic stability of thin plates subjected to complex loading process." Vietnam Journal of Mechanics 16, no. 1 (March 31, 1994): 2–8. http://dx.doi.org/10.15625/0866-7136/10148.

Повний текст джерела

Анотація:

Analyzing an elastic-plastic stability problem, the complex loading process acted on the body has an essential influence on the values of critical loads. For clearing up this effect, in the present paper the general elasto-plastic process theory, theory of process with average curvature and the simple loading process theory are applied into the consideration of the mentioned problem. A numerical comparison is given.

Стилі APA, Harvard, Vancouver, ISO та ін.

15

Arslan, Nurettin. "Elasto-Plastic Behavior of Thermoplastic Matrix Plates with Rectangular Hole." Journal of Reinforced Plastics and Composites 19, no. 17 (November 2000): 1389–404. http://dx.doi.org/10.1177/073168400772678509.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

16

Tian, Yanping, and Yiming Fu. "Elasto-plastic buckling analysis of laminated plates including interfacial damage." Archive of Applied Mechanics 80, no. 6 (May 26, 2009): 593–608. http://dx.doi.org/10.1007/s00419-009-0328-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

17

Mantari, J. L., and F. G. Canales. "Compact and unified elasto-plastic formulation to study isotropic plates." International Journal of Non-Linear Mechanics 118 (January 2020): 103253. http://dx.doi.org/10.1016/j.ijnonlinmec.2019.103253.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

18

Gomonova, Olga V. "Distribution of Zones of Elastic and Plastic Deformation Appearing in a Layer under Compression by Two Rigid Parallel Plates." Journal of Siberian Federal University. Mathematics & Physics 14, no. 4 (July 2001): 492–96. http://dx.doi.org/10.17516/1997-1397-2021-14-4-492-496.

Повний текст джерела

Анотація:

A problem of distribution of zones of elastic and plastic deformation appearing in a layer of elasto-plastic material under compression by two rigid parallel plates, for the case of plane strain state with Tresca – Saint-Venant yield criterion is solved. The technique based on application of conservation laws is used to solve the problem

Стилі APA, Harvard, Vancouver, ISO та ін.

19

GAO, YUANWEN, and HOON HUH. "NUMERICAL ANALYSIS ON MAGNETIC-ELASTO-PLASTIC BUCKLING AND BENDING OF FERROMAGNETIC RECTANGULAR PLATE." International Journal of Modern Physics B 22, no. 31n32 (December 30, 2008): 6212–17. http://dx.doi.org/10.1142/s0217979208051819.

Повний текст джерела

Анотація:

This paper presents an analysis on magnetic-elasto-plastic buckling and bending of a ferromagnetic rectangular plate with simple supports in applied magnetic fields. A numerical code is built to quantitatively simulate the characteristics of the magnetic-elasto-plastic nonlinear coupling problem by using a finite element method. The numerical results indicate that deformation of a ferromagnetic plate with elastic-plastic deformation is larger than that only with the elastic deformation. The incident angle of the applied magnetic field plays an important role in the deformation of the ferromagnetic rectangle plate: not only affects the magnitude of the deformation; but also the mode of the deformation. The configurations and plastic regions of ferromagnetic rectangular plates for different magnitude of the applied magnetic field are simulated and displayed as well.

Стилі APA, Harvard, Vancouver, ISO та ін.

20

Wang, Wensheng, Huijun Ning, Haojie Wei, Qun Mei, and Longtao Xu. "Influence of flanged-cutout on the buckling behaviors of square plate under uniaxial compression." AIP Advances 13, no. 2 (February 1, 2023): 025342. http://dx.doi.org/10.1063/5.0133344.

Повний текст джерела

Анотація:

Cutouts are commonly found in aerospace, ships, and marine structures, which have a great influence on mechanical properties such as stress concentration, natural frequency, and structural load-bearing performance of the structure. In this study, buckling behaviors of a square plate with a circular flanged cutout at the center are explored numerically, aiming to address the influence of different cutout parameters on the elastic and elasto-plastic buckling behaviors of the perforated plate. The flanged-perforated plate is subjected to uniaxial compressive loads, and the four edges are simply supported in the out-of-plane direction. The influence of various cutout parameters on the elastic and elasto-plastic buckling behaviors of the perforated plate is examined through a series of buckling analysis. In addition, structural weight reduction of the uniaxial compressed perforated square plates is carried out under the constraint of the elastic buckling stress of the plate structure. The findings indicate that different cutout parameters have a significant impact on the buckling performance of the plate. Perforated plates with flanging exhibit higher buckling strength than those without flanging, and variations in plate geometric parameters (such as the plate slenderness ratio and cutout radius ratio) are associated with increases in elastic buckling stress and elasto-plastic ultimate strength. The results of this paper can provide references for the design of flanged-cutouts in engineering.

Стилі APA, Harvard, Vancouver, ISO та ін.

21

Zhao, Kuangjie, Xianru Liu, and Jianguang Li. "Elasto-plastic constitutive relation of low temperature marine steel EH36." Journal of Physics: Conference Series 2200, no. 1 (February 1, 2022): 012026. http://dx.doi.org/10.1088/1742-6596/2200/1/012026.

Повний текст джерела

Анотація:

Abstract In order to consider the characteristics of materials and the impact of sea ice collision in the calculation of ultimate strength of stiffened plates, based on the study of dynamic constitutive models of sea ice and polar marine steel at low temperature, this paper explores the calculation model of ultimate strength of stiffened plates for hull with collision dents considering the effects of low temperature and strain rate of steel. A constitutive model of EH36 steel considering low temperature effect is proposed, which has practical engineering value. According to the quasi-static tensile test results of EH36 steel at different temperatures, the relation formula of the influence of temperature reduction on the yield strength of EH36 steel was fitted. Based on the test data and Cowper-Symonds model, a constitutive model of EH36 steel considering low temperature effect is proposed, and the constitutive model is applied to the test simulation calculation, which proves that the dynamic constitutive model of EH36 steel has practical engineering value.

Стилі APA, Harvard, Vancouver, ISO та ін.

22

Ueda, Yukio, Katsuya Umemoto, and Kouji Masaoka. "Elasto-Plastic Large Deflection Analysis of Beam-Columns and Rectangular Plates." Journal of the Society of Naval Architects of Japan 1992, no. 171 (1992): 319–28. http://dx.doi.org/10.2534/jjasnaoe1968.1992.319.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

23

Czarnecki, Sławomir, and Tomasz Lewiński. "The Isotropic Material Design of In-Plane Loaded Elasto-Plastic Plates." Materials 14, no. 23 (December 3, 2021): 7430. http://dx.doi.org/10.3390/ma14237430.

Повний текст джерела

Анотація:

This paper puts forward a new version of the Isotropic Material Design method for the optimum design of structures made of an elasto-plastic material within the Hencky-Nadai-Ilyushin theory. This method provides the optimal layouts of the moduli of isotropy to make the overall compliance minimal. Thus, the bulk and shear moduli are the only design variables, both assumed as non-negative fields. The trace of the Hooke tensor represents the unit cost of the design. The yield condition is assumed to be independent of the design variables, to make the design process as simple as possible. By eliminating the design variables, the optimum design problem is reduced to the pair of the two mutually dual Linear Constrained Problems (LCP). The solution to the LCP stress-based problem directly determines the layout of the optimal moduli. A numerical method has been developed to construct approximate solutions, which paves the way for constructing the final layouts of the elastic moduli. Selected illustrative solutions are reported, corresponding to various data concerning the yield limit and the cost of the design. The yield condition introduced in this paper results in bounding the values of the optimal moduli in the places of possible stress concentration, such as reentrant corners.

Стилі APA, Harvard, Vancouver, ISO та ін.

24

Belinha, J., and L. M. J. S. Dinis. "Elasto‐plastic analysis of plates by the element free Galerkin method." Engineering Computations 23, no. 5 (July 2006): 525–51. http://dx.doi.org/10.1108/02644400610671126.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

25

Turco, Emilio, and Paola Caracciolo. "Elasto-plastic analysis of Kirchhoff plates by high simplicity finite elements." Computer Methods in Applied Mechanics and Engineering 190, no. 5-7 (November 2000): 691–706. http://dx.doi.org/10.1016/s0045-7825(99)00438-7.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

26

Turvey, G. J., and M. Salehi. "Computer generated elasto-plastic design data for pressure loaded circular plates." Computers & Structures 41, no. 6 (January 1991): 1329–40. http://dx.doi.org/10.1016/0045-7949(91)90270-v.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

27

Turvey, G. J., and N. G. V. Der Avanessian. "Axisymmetric elasto-plastic large deflection response of ring stiffened circular plates." International Journal of Mechanical Sciences 31, no. 11-12 (January 1989): 905–24. http://dx.doi.org/10.1016/0020-7403(89)90032-5.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

28

Providakis, C. P., and D. E. Beskos. "Dynamic analysis of elasto-plastic flexural plates by the D/BEM." Engineering Analysis with Boundary Elements 14, no. 1 (January 1994): 75–80. http://dx.doi.org/10.1016/0955-7997(94)90083-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

29

Tian, Y. P., Y. M. Fu, and Y. Wang. "Nonlinear dynamic response of piezoelectric elasto-plastic laminated plates with damage." Composite Structures 88, no. 2 (April 2009): 169–78. http://dx.doi.org/10.1016/j.compstruct.2008.02.019.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

30

Shintani, Masanori, and Manabu Hamai. "Study on Analytical Model of Nonlinear Vibration for Elastic Plates With Gaps Under Random Waves." Journal of Pressure Vessel Technology 126, no. 4 (November 1, 2004): 504–9. http://dx.doi.org/10.1115/1.1689359.

Повний текст джерела

Анотація:

In this paper, an analytical model for the nonlinear elastic-plastic vibration for long plates with gaps subjected to random vibrations is considered. The nonlinear vibration is caused by the collision phenomena between a mass through a gap and plates with thickness of 0.5, 0.6, and 0.8 mm. An elastic perfectly plastic solid material is assumed in some cases, which adds another aspect to the nonlinear behavior of the system. The material characteristic of the steel is assumed to be an elasto-plasticity solid model. A restoring force characteristic is obtained as the nonlinear vibration of a cubic equation for 0.5, 0.6, and 0.8 mm, the thickness of the plates by experiments. Now the analytical model is proposed by the elasto-plasticity solid model. The relation between the displacement and the force is described by a complicated equation. The curve from the analytical model is called a deflection curve. The results by the analytical model are compared with the results by the experimental model. The restoring force characteristics by the analysis agree with those of the experiment. The restoring force characteristics of the analysis are described using cubic equations. The simple analysis model for evaluation of the vibration characteristic of the nonlinear vibration system, which performs collision vibration with gaps, is proposed by elasto-plasticity solid model in this paper. The results of this proposed analytical model agree with the experimental results better than the results of the minimum of error of square.

Стилі APA, Harvard, Vancouver, ISO та ін.

31

Karakuzu, Ramazan, Züleyha Aslan, and U. Kerim Yucel. "Elasto-Plastic Finite Element Analysis of Fully Clamped Laminated Thermoplastic Composite Plates." Journal of Reinforced Plastics and Composites 22, no. 6 (April 2003): 549–61. http://dx.doi.org/10.1106/073168403024559.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

32

Komur, M. Aydin. "Elasto-plastic buckling analysis for perforated steel plates subject to uniform compression." Mechanics Research Communications 38, no. 2 (March 2011): 117–22. http://dx.doi.org/10.1016/j.mechrescom.2011.01.001.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

33

Daye, M. A., and T. G. Toridis. "Elasto-plastic algorithms for plates and shells under static and dynamic loads." Computers & Structures 39, no. 1-2 (January 1991): 195–205. http://dx.doi.org/10.1016/0045-7949(91)90087-3.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

34

Lim, G. T., and G. J. Turveoy. "On the elasto-plastic large deflection response of stocky annular steel plates." Computers & Structures 21, no. 4 (January 1985): 725–35. http://dx.doi.org/10.1016/0045-7949(85)90148-8.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

35

Maiorana, Emanuele, Carlo Pellegrino, and Claudio Modena. "Elasto-plastic behaviour of perforated steel plates subjected to compression and bending." Steel & Composite structures 11, no. 2 (March 25, 2011): 131–47. http://dx.doi.org/10.12989/scs.2011.11.2.131.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

36

da Costa Mattos, H. S., and Paulo F. Soares Filho. "Approximate local elasto-plastic solution for notched plates undergoing cyclic tensile loading." Materials & Design 31, no. 9 (October 2010): 4336–47. http://dx.doi.org/10.1016/j.matdes.2010.03.050.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

37

Davoli, Elisa. "Quasistatic evolution models for thin plates arising as low energy Γ-limits of finite plasticity". Mathematical Models and Methods in Applied Sciences 24, № 10 (27 травня 2014): 2085–153. http://dx.doi.org/10.1142/s021820251450016x.

Повний текст джерела

Анотація:

In this paper we deduce by Γ-convergence some partially and fully linearized quasistatic evolution models for thin plates, in the framework of finite plasticity. Denoting by ε the thickness of the plate, we study the case where the scaling factor of the elasto-plastic energy is of order ε2α-2, with α ≥ 3. These scalings of the energy lead, in the absence of plastic dissipation, to the Von Kármán and linearized Von Kármán functionals for thin plates. We show that solutions to the three-dimensional quasistatic evolution problems converge, as the thickness of the plate tends to zero, to a quasistatic evolution associated to a suitable reduced model depending on α.

Стилі APA, Harvard, Vancouver, ISO та ін.

38

Chen, Tsung Chia. "An Elasto-Plastic Finite Element Analysis of the Radial Compression of Aluminium Tube between Rigid Plates." Advanced Materials Research 264-265 (June 2011): 166–71. http://dx.doi.org/10.4028/www.scientific.net/amr.264-265.166.

Повний текст джерела

Анотація:

This study aims to clarify the process conditions of the radial compression of aluminum tube. It provides a model that predicts not only the correct punch load for compression, but also the precise final shape of products after unloading, based on the compression properties of the material and the geometry of the tools used. An elasto-plastic incremental finite-element computer code, based on an updated Lagrangian formulation, was developed to simulate the radial compression of aluminum tube. In particular, selective reduced integration was adopted to formulate the stiffness matrix. The extended r-minimum technique was used to deal with the elasto-plastic state and contact problems at the tool-metal interface. A series of simulations were performed to validate the formulation in the theory, leading to the development of the computer codes. The whole deformation history and the distribution of stress and strain during the forming process were obtained by carefully considering the moving boundary condition in the finite-element method. Results in this study clearly demonstrated that the computer code for simulating the radial compression of aluminum tube was efficient.

Стилі APA, Harvard, Vancouver, ISO та ін.

39

Sun, Li Gen, and Jia Quan Zhang. "Research on Thermocouple Embedded Position for CC Mould Copper Plate with High Casting Speed." Advanced Materials Research 291-294 (July 2011): 698–705. http://dx.doi.org/10.4028/www.scientific.net/amr.291-294.698.

Повний текст джерела

Анотація:

High casting speed would increase the occurrence probability of sticking, and make it harder for breakout signals catching. The coupled visco-elasto-plastic FEM models have been presented for thermal process analysis of steel shell and the mould copper plates. With the understanding to the mould thermal state and deformation for different casting speed, the principle for the layout of thermocouples is obtained. It is shown that, the set of the thermocouples to the meniscus for the plates should be decided by the highest design casting speed, and the location of the thermocouples from the cold side of the plates is deeper, the breakout signals would be caught easier.

Стилі APA, Harvard, Vancouver, ISO та ін.

40

Crocombe, A. D., and D. A. Bigwood. "Development of a full elasto-plastic adhesive joint design analysis." Journal of Strain Analysis for Engineering Design 27, no. 4 (October 1, 1992): 211–18. http://dx.doi.org/10.1243/03093247v274211.

Повний текст джерела

Анотація:

A previous adhesive joint analysis that accommodated non-linear adhesive behaviour is extended to model the elasto-plastic response of the adherends. The resulting analysis models the joint as an adherend-adhesive sandwich capable of sustaining any combination of end load conditions, thus enabling a wide variety of adhesive joints to be modelled. The adhesive is assumed to behave as a coupled set of non-linear shear and tension springs, and the adherends as cylindrically bent plates which yield under the action of combined tension and bending. The complete problem is reduced to a set of six non-linear first-order ordinary differential equations which are solved numerically using a finite-difference method. In this way a reasonable assessment of adhesive stresses and strains can be obtained easily, without resorting to the complexity of a two-dimensional finite element solution. A comparison between the results from these two methods has been made and is presented in this paper after the outline of the analysis derivations.

Стилі APA, Harvard, Vancouver, ISO та ін.

41

DEMYANOV, ALEXEY. "QUASISTATIC EVOLUTION IN THE THEORY OF PERFECTLY ELASTO-PLASTIC PLATES PART I: EXISTENCE OF A WEAK SOLUTION." Mathematical Models and Methods in Applied Sciences 19, no. 02 (February 2009): 229–56. http://dx.doi.org/10.1142/s0218202509003413.

Повний текст джерела

Анотація:

The existence of weak solutions to the quasistatic problems in the theory of perfectly elasto-plastic plates is studied in the framework of the variational theory for rate-independent processes. Approximate solutions are constructed by means of incremental variational problems in spaces of functions with bounded hessian. The constructed weak solution is shown to be absolutely continuous in time. A strong formulation of the flow rule is obtained.

Стилі APA, Harvard, Vancouver, ISO та ін.

42

Meftah, Kamel, and Lakhdar Sedira. "A nonlinear elasto-plastic analysis of Reissner-Mindlin plates by finite element method." Frattura ed Integrità Strutturale 13, no. 50 (August 20, 2019): 276–85. http://dx.doi.org/10.3221/igf-esis.50.23.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

43

Barski, Marek, Adam Stawiarski, Paweł J. Romanowicz, and Bogdan Szybiński. "Local Elasto–plastic Buckling of Isotropic Plates With Cutouts Under Tension Loading Conditions." International Journal of Mechanics 15 (June 3, 2021): 69–87. http://dx.doi.org/10.46300/9104.2021.15.8.

Повний текст джерела

Анотація:

The motivation of the presented study was the observation of the existence of local loss of stability “tension buckling” in the experimental tests of composite and metallic plates with cut-outs subjected to tension. Because of this, the numerical analyses of the aluminum plate with elliptical or circular cutouts at the center and subjected to tensile load are studied in the paper. Although the whole structure is uniformly stretched, the circumferential compressive stresses in the vicinity of the cutout edge are observed. First of all, the linear buckling analysis is carried out for different sizes of the holes. Based on these results, the size of the hole is chosen, where the circumferential stress magnitude in the vicinity of the cutout is the lowest or even comparable to the yield stress of the material. The computations are made for three different values of thickness. Finally, the nonlinear buckling analysis is carried out without and with the plasticity effects included. Generally, in the case of the circular and vertically oriented elliptical cut-out, the loss of stability in the tensed plate is always observed. However, in elastic-plastic analyses, the values of the critical parameters significantly differ from the results obtained for elastic buckling. Finally, the critical geometries for further experimental tests were defined.

Стилі APA, Harvard, Vancouver, ISO та ін.

44

Örçen, Gurbet, and Mustafa Gür. "Elasto-Plastic Stress Analysis in Laminated Thermoplastic Composite Plates with an Elliptic Hole." Mathematical and Computational Applications 18, no. 1 (April 1, 2013): 38–49. http://dx.doi.org/10.3390/mca18010038.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

45

Banno, Shigeru, Tsutomu Usami, and Eiji Mizuno. "Cyclic Elasto-Plastic Finite Displacement Analysis of Plates with Modified Two-Surface Model." Doboku Gakkai Ronbunshu, no. 525 (1995): 1–15. http://dx.doi.org/10.2208/jscej.1995.525_1.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

46

IKEDA, Kiyohiro, Toshiyuki KITADA, Yuki YAMAKAWA, Masahide MATSUMURA, Akira SHIBASAKI, and Yuuichi KARINO. "SENSITIVITY LAW AND PROBABILISTIC VARIATION OF ELASTO-PLASTIC ULTIMATE STRENGTH OF IMPERFECT PLATES." Doboku Gakkai Ronbunshuu A 64, no. 4 (2008): 926–34. http://dx.doi.org/10.2208/jsceja.64.926.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

47

Bektaş, Numan B., and Onur Sayman. "Elasto-plastic stress analysis in simply supported thermoplastic laminated plates under thermal loads." Composites Science and Technology 61, no. 12 (September 2001): 1695–701. http://dx.doi.org/10.1016/s0266-3538(01)00073-2.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

48

Fallah, N., and A. Parayandeh-Shahrestany. "A novel finite volume based formulation for the elasto-plastic analysis of plates." Thin-Walled Structures 77 (April 2014): 153–64. http://dx.doi.org/10.1016/j.tws.2013.09.025.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

49

Khorshidi, Korosh. "Elasto-Plastic Response of Impacted Moderatly Thick Rectangular Plates with Different Boundary Conditions." Procedia Engineering 10 (2011): 1742–47. http://dx.doi.org/10.1016/j.proeng.2011.04.290.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

50

Kant, T., R. K. Tripathi, and V. Rode. "Elasto-Plastic Behaviour of Thick Plates with a Higher-Order Shear Deformation Theory." Proceedings of the Indian National Science Academy 79, no. 4 (December 1, 2013): 563. http://dx.doi.org/10.16943/ptinsa/2013/v79i4/47993.

Повний текст джерела

Стилі APA, Harvard, Vancouver, ISO та ін.

Ми пропонуємо знижки на всі преміум-плани для авторів, чиї праці увійшли до тематичних добірок літератури. Зв'яжіться з нами, щоб отримати унікальний промокод!