Добірка наукової літератури з теми "E. Reactive infiltration"
Оформте джерело за APA, MLA, Chicago, Harvard та іншими стилями
Ознайомтеся зі списками актуальних статей, книг, дисертацій, тез та інших наукових джерел на тему "E. Reactive infiltration".
Біля кожної праці в переліку літератури доступна кнопка «Додати до бібліографії». Скористайтеся нею – і ми автоматично оформимо бібліографічне посилання на обрану працю в потрібному вам стилі цитування: APA, MLA, «Гарвард», «Чикаго», «Ванкувер» тощо.
Також ви можете завантажити повний текст наукової публікації у форматі «.pdf» та прочитати онлайн анотацію до роботи, якщо відповідні параметри наявні в метаданих.
Статті в журналах з теми "E. Reactive infiltration"
CHADAM, J., D. HOFF, E. MERINO, P. ORTOLEVA, and A. SEN. "Reactive Infiltration Instabilities." IMA Journal of Applied Mathematics 36, no. 3 (1986): 207–21. http://dx.doi.org/10.1093/imamat/36.3.207.
Повний текст джерелаEustathopoulos, N., R. Israel, B. Drevet, and D. Camel. "Reactive infiltration by Si: Infiltration versus wetting." Scripta Materialia 62, no. 12 (June 2010): 966–71. http://dx.doi.org/10.1016/j.scriptamat.2010.02.030.
Повний текст джерелаSangsuwan, Prasert, Joaquín A. Orejas, Jorge E. Gatica, Surendra N. Tewari, and Mrityunjay Singh. "Reaction-Bonded Silicon Carbide by Reactive Infiltration." Industrial & Engineering Chemistry Research 40, no. 23 (November 2001): 5191–98. http://dx.doi.org/10.1021/ie001029e.
Повний текст джерелаKobayashi, Yoshihiro, Makoto Kobashi, and Naoyuki Kanetake. "Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process." Advanced Materials Research 26-28 (October 2007): 321–24. http://dx.doi.org/10.4028/www.scientific.net/amr.26-28.321.
Повний текст джерелаSzymczak, Piotr, and Anthony J. C. Ladd. "Reactive-infiltration instabilities in rocks. Fracture dissolution." Journal of Fluid Mechanics 702 (May 28, 2012): 239–64. http://dx.doi.org/10.1017/jfm.2012.174.
Повний текст джерелаHozer, Leszek, and Yet-Ming Chiang. "Reactive-infiltration processing of SiC-metal and SiC-intermetallic composites." Journal of Materials Research 11, no. 9 (September 1996): 2346–57. http://dx.doi.org/10.1557/jmr.1996.0298.
Повний текст джерелаTong, Yonggang, Shuxin Bai, Xiubing Liang, Qing H. Qin, and Jiangtao Zhai. "Reactive melt infiltration fabrication of C/C-SiC composite: Wetting and infiltration." Ceramics International 42, no. 15 (November 2016): 17174–78. http://dx.doi.org/10.1016/j.ceramint.2016.08.007.
Повний текст джерелаCaccia, Mario, and Javier Narciso. "Production of SiC Materials by Reactive Infiltration." Materials Science Forum 783-786 (May 2014): 1863–66. http://dx.doi.org/10.4028/www.scientific.net/msf.783-786.1863.
Повний текст джерелаChen, Yuyong, and D. L. Chung. "Nickel aluminide (Ni3Al) fabricated by reactive infiltration." Journal of Materials Science 31, no. 8 (April 1996): 2117–22. http://dx.doi.org/10.1007/bf00356634.
Повний текст джерелаRoessler, Karl, Gerda Suchanek, Helene Breitschopf, Klaus Kitz, Christian Matula, Hans Lassmann та Wolfgang Th Koos. "Detection of tumor necrosis factor-α protein and messenger RNA in human glial brain tumors: comparison of immunohistochemistry with in situ hybridization using molecular probes". Journal of Neurosurgery 83, № 2 (серпень 1995): 291–97. http://dx.doi.org/10.3171/jns.1995.83.2.0291.
Повний текст джерелаДисертації з теми "E. Reactive infiltration"
San, Marchi Christopher William. "Processing of aluminum-nickel intermetallics by reactive infiltration." Thesis, Massachusetts Institute of Technology, 1997. http://hdl.handle.net/1721.1/43369.
Повний текст джерелаIncludes bibliographical references (p. 107-111).
by Christopher William San Marchi.
Ph.D.
Ventakesh, T. A. 1970. "Reactive infiltration processing and compression creep of NiAl and NiAl composites." Thesis, Massachusetts Institute of Technology, 1998. http://hdl.handle.net/1721.1/50458.
Повний текст джерелаIncludes bibliographical references (p. 116-118).
Reactive infiltration processing of bulk and composite NiAl was investigated with powder and wire preforms of nickel. Inhomogeneous microstructures were often obtained with powder preforms because their high surface-to-volume ratio, low permeability, and irregular infiltration paths lead to simultaneous infiltration and reaction. Homogenous NiAl could be obtained with nickel-wire preforms which had a lower surface-to-volume ratio, higher permeability, and regular infiltration paths, because infiltration was completed before the onset of reaction. Composites with continuous tungsten (W) and sapphire fibers were also successfully fabricated by reactive infiltration, while composites with molybdenum particulates and short-fibers showed significant dissolution in NiAl. The high-temperature uni-axial compression creep behavior of uni-directionally reinforced continuous fiber composite materials was investigated using NiAl-W as a model system for the case where both the NiAl matrix and the W fiber underwent plastic deformation by creep. The creep behavior of the constituents NiAl and W and NiAl composites reinforced with 5-20 volume % W was characterized at 1025 °C and 715 °C. At 1025°C, the NiAl-W composites exhibited three stage creep behavior with distinct primary, secondary, and tertiary creep, wherein the composite creep-rate decreased monotonically, remained constant, and increased rapidly, respectively. At 715C, the NiAl-W composites exhibited insignificant primary and tertiary creep but significant secondary creep. Microstructurally, primary and secondary creep were characterized by pure uni-axial compression of W fibers while brooming, bulging, buckling, and kinking were four fiber deformation modes that contributed to tertiary creep. The composite primary creep was modeled by solving for transient stress-states while loads transferred from the weaker phase (matrix) to the stronger phase (fiber) as the composite transitioned from the elastic state present at loading to steady-states attained at later times. The effects of primary creep of the constituents on the primary creep of the composite were also captured. Composite primary creep strains were predicted to be significant at high applied composite stresses and for high fiber volume fraction composites, while the composite primary time was uniquely related to the composite steady-state creep-rate by a power-law at a given temperature and for the stress range investigated. Good correlation between the primary creep model predictions and experiments was obtained when the observed composite steady-state creep behavior converged to the McLean steady-state. The composite secondary creep was observed to correlate reasonably well with the rule-of-mixtures model developed by McLean. The composite tertiary creep was modeled by solving for global or local kink-band evolution with composite deformation respectively contributing to fiber buckling or kinking. The model predicted the critical threshold strain for the onset of tertiary stage to be most sensitive to the initial kink angles while being relatively insensitive to the initial kink-band heights and varied inversely with the volume fraction of fiber in the composite. Reasonable correlation between the model and experiments was obtained when the observed composite steady-state correlated well with the McLean steady-state.
by T.A. Venkatesh.
Ph.D.
Caccia, Mario. "Synthesis and Processing of SiC-based Composite Materials by Reactive Infiltration." Doctoral thesis, Universidad de Alicante, 2016. http://hdl.handle.net/10045/72732.
Повний текст джерелаZHOU, HONG. "KINETICS, PROCESSING, AND PROPERTIES OF Si/SiC COMPOSITES FABRICATED BY REACTIVE-MELT INFILTRATION." University of Cincinnati / OhioLINK, 2001. http://rave.ohiolink.edu/etdc/view?acc_num=ucin994941745.
Повний текст джерелаKütemeyer, Marius [Verfasser], and D. [Akademischer Betreuer] Koch. "Development of Ultra High Temperature Matrix Composites using a Reactive Melt Infiltration Process / Marius Kütemeyer ; Betreuer: D. Koch." Karlsruhe : KIT-Bibliothek, 2021. http://d-nb.info/1230475699/34.
Повний текст джерелаFatehi, Pouladi Soheil. "Phosphorus Removal from Domestic Wastewater Using Dual Reactive Materials Polonite® and Absol®." Thesis, KTH, Miljögeokemi och ekoteknik, 2011. http://urn.kb.se/resolve?urn=urn:nbn:se:kth:diva-95429.
Повний текст джерелаValhondo, Cristina. "A reactive barrier to enhance the removal of emerging organic compounds during artificial recharge of aquifers through infiltration basins." Doctoral thesis, Universitat Politècnica de Catalunya, 2017. http://hdl.handle.net/10803/405794.
Повний текст джерелаLa recarga artificial de acuíferos a través de balsas de infiltración (AR) mejora la calidad del agua y aumenta recursos de aguas subterráneas, convirtiéndola en una técnica apropiada para la renaturalización de las aguas afectadas directa o indirectamente por los efluentes de aguas residuales. En este tipo de aguas la presencia de compuestos orgánicos emergentes (EOCs) es más que frecuente. Durante la recarga artificial este tipo de compuestos es eliminado principalmente debido a la adsorción y a la biotransformación. Para mejorar la eliminación de los EOCs durante la infiltración del agua de recarga se instaló una barrera reactiva en una balsa de infiltración. La barrera consistía en arena, compost vegetal, óxidos de hierro y arcilla. La finalidad del compost vegetal era por un lado la de aportar carbono orgánico disuelto para ser utilizado como principal fuente de carbono por la comunidad microbiana promoviendo así la generación de diversas condiciones redox, y por otro lado la de adsorber EOCs neutros. La Arcilla y los óxidos de hierro se pusieron con la intención de aumentar los sitios de adsorción para los EOCs catiónicos y aniónicos, respectivamente. La efectividad de la barrera en el campo se estudió comparando el comportamiento de los indicadores redox y de los EOCs antes y después de la instalación de la barrera. Mediante un ensayo de trazadores tipo pulso se obtuvieron las distribuciones de los tiempos de residencia del agua de recarga a los puntos de observación. Estas distribuciones se utilizaron para calibrar un modelo de flujo y transporte conservativo del acuífero. Por último, las tasas de degradación de primer orden y los factores de retardo de varios EOCs se estimaron mediante el ajuste de los resultados del modelo con las concentraciones observadas. Las tasas de degradación y los factores de retardo estimados se compararon con valores encontrados en la bibliografía. La barrera reactiva cumple su función aportando carbono orgánico y generando diversas condiciones redox. Muchos de los EOCs estudiados mostraron una mejor transformación cuando la recarga se realizó con la barrera reactiva. Las tasas de degradación y factores de retardo estimados en la barrera son mayores que los estimados para el resto del acuífero, y del mismo orden o superiores a los encontrados en la bibliografía. En resumen, la barrera reactiva propuesta mejora significativamente el rendimiento de la recarga artificial a través de balsas de infiltración, contribuyendo así a la renaturalización de las aguas recargadas
Richet, Nicolas. "Elaboration et caractérisation d'une protection anti-oxydation pour matériaux carbonnes : le système HfB(2)-SiC." Limoges, 2003. http://www.unilim.fr/theses-doctorat/2003LIMO0023/html/index-frames.html.
Повний текст джерелаThe aim of this work is the elaboration and the caracterisation of HfB2SiC oxidation protection coating for carbon based materials. Silicon carbide is formed by reactive infiltration of silicon through a porous carbon/HfB2 grains layer. The coating microstructure is composed of HfB2 grains surrounded by SiC nanoparticles and a phase containing Hf-B-Si-C at the interface between HfB2 and Sic. The oxidation behaviour was studied between 1 and 200 mbar by linear increase of temperature and under isothermal conditions. A sealing refractory glass, more stable than pure silica, is formed. The oxidation kinetic follows very quickly a slow parabolic law up to 1 700°C
Quet, Aurélie. "Composites de friction à matrice céramique : relation composition / structure / comportement tribologique." Bordeaux 1, 2007. http://www.theses.fr/2007BOR13512.
Повний текст джерелаC/C composites are nowadays the most suitable materials for needs of aircraft braking. However, they show a high wear during taxiing. SiC matrix composites are characterised by a smoothing of the wear peak noticed at low temperatures but they don't meet requirements of rejected take-off (RTO). The aim of this work is to put another carbide than SiC in the matrix of friction composites and to assess its influence on tribological properties of materials. C/C-ZrC and C/C-TiC composites were manufactured using RMI processing route (Reactive Melt Infiltration). Materials were characterised with mophological, chemical and structural analysis which reveal especially a decohesion between carbon phase and carbide phase. This gap can be limited using alloys as Zr-Si and Ti-Si alloys. Triboligical behaviour of the resulting materials was then investigated with an inertial dynamometer simulating brake stops. C/C-ZrC and C/C-TiC composites meet RTO requirements. Neverless, ZrC matrix composites have a high wear for high temperature brake stops linked to their oxidation behaviour. TiC matrix composites present moderate wear at high temperature and a lower wear at low temperature compared to C/C composites in relation to low friction coefficients
Mills, Kevin. "The response of reactive clay soils to wetting agents in the presence of active vegetation." Thesis, Queensland University of Technology, 1998.
Знайти повний текст джерелаКниги з теми "E. Reactive infiltration"
Singh, M. Reactive melt infiltration of silicon-molybdenum alloys into microporous carbon preforms. [Washington, D.C: National Aeronautics and Space Administration, 1995.
Знайти повний текст джерелаR, Behrendt D., and United States. National Aeronautics and Space Administration., eds. Studies on the reactive melt infiltration of silicon and silicon-molybdenum alloys in porous carbon. [Washington, DC: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаSingh, M. Studies on the reactive melt infiltration of silicon and silicon-molybdenum alloys in porous carbon. [Washington, DC: National Aeronautics and Space Administration, 1992.
Знайти повний текст джерелаM, Singh, and United States. National Aeronautics and Space Administration., eds. Theoretical considerations for reaction-formed silicon carbide (RFSC) formation by molten silicon infiltration into slurry-derived preforms. [Washington, DC: National Aeronautics and Space Administration, 1993.
Знайти повний текст джерелаTheoretical considerations for reaction-formed silicon carbide (RFSC) formation by molten silicon infiltration into slurry-derived preforms. [Washington, DC: National Aeronautics and Space Administration, 1993.
Знайти повний текст джерелаNational Aeronautics and Space Administration (NASA) Staff. Theoretical Considerations for Reaction-Formed Silicon Carbide (Rfsc) Formation by Molten Silicon Infiltration into Slurry-Derived Preforms. Independently Published, 2019.
Знайти повний текст джерелаPieth, Mark. Finance and the “Shadow Economy”. Oxford University Press, 2017. http://dx.doi.org/10.1093/oso/9780190458331.003.0009.
Повний текст джерелаMoerdler, Scott, and Xingxing Zang. PD-1/PDL-1 Inhibitors as Immunotherapy for Ovarian Cancer. Oxford University Press, 2018. http://dx.doi.org/10.1093/med/9780190248208.003.0010.
Повний текст джерелаЧастини книг з теми "E. Reactive infiltration"
Caccia, Mario, and Javier Narciso. "SiC Manufacture Via Reactive Infiltration." In Ceramic Transactions Series, 15–25. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2014. http://dx.doi.org/10.1002/9781118995433.ch2.
Повний текст джерелаChadam, John. "Reactive Flows in Porous Media: The Reaction-Infiltration Instability." In Flow in Porous Media, 51–58. Basel: Birkhäuser Basel, 1993. http://dx.doi.org/10.1007/978-3-0348-8564-5_6.
Повний текст джерелаKobayashi, Yoshihiro, Makoto Kobashi, and Naoyuki Kanetake. "Fabrication of Oxide Ceramics Composite by Reactive Infiltration Process." In Advanced Materials Research, 321–24. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-463-4.321.
Повний текст джерелаWali, Natalie, and J. M. Yang. "Reactive Melt-Infiltration Processing of Fiber-Reinforced Ceramic Matrix Composites." In Ceramics and Composites Processing Methods, 351–90. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2012. http://dx.doi.org/10.1002/9781118176665.ch10.
Повний текст джерелаVoigt, R., W. Krenkel, G. Motz, and A. Can. "Development of Ultra-High Temperature Stable Ceramics by Reactive Infiltration Processes." In Ceramic Transactions Series, 121–30. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2011. http://dx.doi.org/10.1002/9781118144442.ch11.
Повний текст джерелаCasagrande, A., G. P. Cammarota, and L. Ceschini. "Synthesis of Intermetallic Alumina Composites with Interpenetrating Phases by Reactive Metal Infiltration." In Intermetallics and Superalloys, 140–45. Weinheim, FRG: Wiley-VCH Verlag GmbH & Co. KGaA, 2006. http://dx.doi.org/10.1002/3527607285.ch24.
Повний текст джерелаKütemeyer, Marius, Darren Shandler, Dietmar Koch, and Martin Friess. "Reactive Melt Infiltration of Boron Containing Fiber Reinforced Preforms Forming a ZrB2Matrix." In Processing and Properties of Advanced Ceramics and Composites VII, 169–80. Hoboken, NJ, USA: John Wiley & Sons, Inc., 2015. http://dx.doi.org/10.1002/9781119183860.ch18.
Повний текст джерелаEscalera-Lozano, Rodrigo, Carlos A. Gutiérrez-Chavarría, Max A. Pech-Canul, and Martin I. Pech-Canul. "Degradation of Al/SiCp Composites Processed with Fly Ash via Reactive Infiltration." In Advanced Structural Materials III, 139–44. Stafa: Trans Tech Publications Ltd., 2007. http://dx.doi.org/10.4028/0-87849-446-4.139.
Повний текст джерелаGiunchi, Giovanni, Giovanni Ripamonti, Elena Perini, Stefano Ginocchio, Enrico Bassani, and Tommaso Cavallin. "Highly Densified MgB2 Bulks by Reactive Mg Liquid Infiltration." In Advances in Science and Technology, 7–16. Stafa: Trans Tech Publications Ltd., 2006. http://dx.doi.org/10.4028/3-908158-03-6.7.
Повний текст джерелаByerley, B. T., and W. D. Robertson. "Remediation of Landfill Leachate Using Infiltration Bed and Reactive Barrier Technology: A Field Study." In Environmental Biotechnology, 417–30. Dordrecht: Springer Netherlands, 1995. http://dx.doi.org/10.1007/978-94-017-1435-8_36.
Повний текст джерелаТези доповідей конференцій з теми "E. Reactive infiltration"
Nelson, Emily S., and Phillip Colella. "Parametric Study of Reactive Melt Infiltration." In ASME 1999 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 1999. http://dx.doi.org/10.1115/imece1999-0794.
Повний текст джерелаBalagangadhar, Dinesh, and Gopalaswamy Rajesh. "Macro Modeling of Reactive Infiltration Using Level Set Finite Element Formulations." In ASME 2000 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2000. http://dx.doi.org/10.1115/imece2000-1239.
Повний текст джерелаPons, A., C. Descamps, Eric Arquis, Stephane Vincent, C. Le Bot, and M. Valat. "SIMULATION OF REACTIVE MELT INFILTRATION FOR THE MANUFACTURE OF CERAMIC MATRIX COMPOSITES." In Proceedings of CHT-15. 6th International Symposium on ADVANCES IN COMPUTATIONAL HEAT TRANSFER , May 25-29, 2015, Rutgers University, New Brunswick, NJ, USA. Connecticut: Begellhouse, 2015. http://dx.doi.org/10.1615/ichmt.2015.intsympadvcomputheattransf.710.
Повний текст джерелаGiunchi, Giovanni. "The Superconducting Properties of High Density Bulk MgB2 Obtained by Reactive Liquid Mg Infiltration." In ADVANCES IN CRYOGENIC ENGINEERING. AIP, 2006. http://dx.doi.org/10.1063/1.2192428.
Повний текст джерелаNagaraj, B. A., and D. J. Wortman. "Burner Rig Evaluation of Ceramic Coatings With Vanadium-Contaminated Fuels." In ASME 1989 International Gas Turbine and Aeroengine Congress and Exposition. American Society of Mechanical Engineers, 1989. http://dx.doi.org/10.1115/89-gt-270.
Повний текст джерелаGiunchi, Giovanni, Alessandro Figini Albisetti, Luciana Malpezzi, Luca Saglietti, and Elena Perini. "High performance bulk MgB2 obtained by the Reactive Mg-Liquid Infiltration process: New advancements and solutions." In 2011 International Conference on Applied Superconductivity and Electromagnetic Devices (ASEMD). IEEE, 2011. http://dx.doi.org/10.1109/asemd.2011.6145132.
Повний текст джерелаGiunchi, G., T. Cavallin, P. Bassani, S. Guicciardi, U. (Balu) Balachandran, Kathleen Amm, David Evans, et al. "THE MECHANICAL PROPERTIES OF THE MgB[sub 2] BULK MATERIALS OBTAINED BY REACTIVE LIQUID Mg INFILTRATION." In ADVANCES IN CRYOGENIC ENGINEERING MATERIALS: Transactions of the International Cryogenic Materials Conference - ICMC, Vol. 54. AIP, 2008. http://dx.doi.org/10.1063/1.2900373.
Повний текст джерелаLuckhardt, Tracy R., Zhihuan Sun, Lanfang Wang, Tong H. Jin, Guangjie Cheng, Victor J. Thannickal, and Jessy Deshane. "Viral Latency-Associated Infiltration Of Reactive Oxygen Species Generating Immunoregulatory Myeloid-Derived Cells Following GHV68 Infection." In American Thoracic Society 2012 International Conference, May 18-23, 2012 • San Francisco, California. American Thoracic Society, 2012. http://dx.doi.org/10.1164/ajrccm-conference.2012.185.1_meetingabstracts.a5412.
Повний текст джерелаTian, Sheng, Thomas Thundat, Subir Bhattacharjee, Kenneth C. Cadien, and Sushanta K. Mitra. "On-Chip Power Generation: Microfluidic-Based Reactor for Catalytic Combustion of Methanol." In ASME 2013 International Mechanical Engineering Congress and Exposition. American Society of Mechanical Engineers, 2013. http://dx.doi.org/10.1115/imece2013-62776.
Повний текст джерелаSchiaffino, Arturo, V. M. Krushnarao Kotteda, Vinod Kumar, Arturo Bronson, and Sanjay Shantha-Kumar. "Uncertainty Quantification of Molten Hafnium Infusion Into a B4C Packed-Bed." In ASME-JSME-KSME 2019 8th Joint Fluids Engineering Conference. American Society of Mechanical Engineers, 2019. http://dx.doi.org/10.1115/ajkfluids2019-5281.
Повний текст джерелаЗвіти організацій з теми "E. Reactive infiltration"
Ladd, Anthony. Reaction-Infiltration Instabilities in Fractured and Porous Rocks. Office of Scientific and Technical Information (OSTI), September 2017. http://dx.doi.org/10.2172/1392514.
Повний текст джерела